Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.16.7.8-1-MANJARO] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Momentus 5400.3
- Device Model: ST960813AS
- Serial Number: 5LY1KAFA
- Firmware Version: 3.ALB
- User Capacity: 60,011,642,880 bytes [60,0 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
- Local Time is: Mon Mar 30 16:11:40 2015 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 73) The previous self-test completed having
- a test element that failed and the test
- element that failed is not known.
- Total time to complete Offline
- data collection: ( 426) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- No General Purpose Logging support.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 84) minutes.
- SCT capabilities: (0x0001) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 103 077 006 Pre-fail Always - 193094718
- 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4621
- 5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 24623
- 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 373955107
- 9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14074
- 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4687
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 65535
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 062 045 045 Old_age Always In_the_past 38 (Min/Max 29/38)
- 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2450
- 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 494691
- 194 Temperature_Celsius 0x0022 038 055 000 Old_age Always - 38 (0 14 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 075 056 000 Old_age Always - 239758398
- 197 Current_Pending_Sector 0x0012 017 016 000 Old_age Always - 1715
- 198 Offline_Uncorrectable 0x0010 017 016 000 Old_age Offline - 1715
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
- 202 Data_Address_Mark_Errs 0x0032 090 243 000 Old_age Always - 10
- SMART Error Log Version: 1
- Warning: ATA error count 65535 inconsistent with error log pointer 3
- ATA Error Count: 65535 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 65535 occurred at disk power-on lifetime: 13601 hours (566 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 07 3f f1 e2 Error: UNC at LBA = 0x02f13f07 = 49364743
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 00 3f f1 e2 00 00:36:14.302 READ DMA
- c8 00 08 f8 3e f1 e2 00 00:36:14.302 READ DMA
- c8 00 08 f0 3e f1 e2 00 00:36:14.302 READ DMA
- c8 00 08 e8 3e f1 e2 00 00:36:14.302 READ DMA
- c8 00 08 e0 3e f1 e2 00 00:36:14.301 READ DMA
- Error 65534 occurred at disk power-on lifetime: 13423 hours (559 days + 7 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 2b 68 17 e3 Error: UNC at LBA = 0x0317682b = 51865643
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 00 68 17 e3 00 00:32:03.364 READ DMA
- c8 00 00 00 67 17 e3 00 00:32:03.263 READ DMA
- c8 00 00 00 66 17 e3 00 00:32:03.165 READ DMA
- c8 00 00 00 65 17 e3 00 00:32:03.073 READ DMA
- c8 00 00 00 64 17 e3 00 00:32:04.421 READ DMA
- Error 65533 occurred at disk power-on lifetime: 13352 hours (556 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 2b 68 17 e3 Error: UNC at LBA = 0x0317682b = 51865643
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 88 67 17 e3 00 00:38:13.201 READ DMA
- c8 00 00 88 66 17 e3 00 00:38:13.197 READ DMA
- c8 00 00 88 65 17 e3 00 00:38:13.192 READ DMA
- c8 00 00 88 64 17 e3 00 00:38:13.189 READ DMA
- c8 00 00 88 63 17 e3 00 00:38:13.243 READ DMA
- Error 65532 occurred at disk power-on lifetime: 13316 hours (554 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 2b 68 17 e3 Error: UNC at LBA = 0x0317682b = 51865643
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 00 68 17 e3 00 01:30:03.599 READ DMA
- c8 00 00 00 67 17 e3 00 01:30:03.594 READ DMA
- c8 00 00 00 66 17 e3 00 01:30:03.591 READ DMA
- c8 00 00 00 65 17 e3 00 01:30:03.587 READ DMA
- c8 00 00 00 64 17 e3 00 01:30:03.584 READ DMA
- Error 65531 occurred at disk power-on lifetime: 13315 hours (554 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 2b 68 17 e3 Error: UNC at LBA = 0x0317682b = 51865643
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 00 00 68 17 e3 00 00:49:19.302 READ DMA
- c8 00 00 00 67 17 e3 00 00:49:19.154 READ DMA
- c8 00 00 00 66 17 e3 00 00:49:18.987 READ DMA
- c8 00 00 00 65 17 e3 00 00:49:18.848 READ DMA
- c8 00 00 00 64 17 e3 00 00:49:18.709 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short captive Completed: unknown failure 90% 12056 50140953
- # 2 Short captive Completed: unknown failure 90% 12056 50140953
- # 3 Short captive Completed: unknown failure 90% 12056 50140953
- # 4 Short captive Completed: unknown failure 90% 12056 50140953
- # 5 Short captive Completed: unknown failure 90% 12056 50140953
- # 6 Short captive Completed: unknown failure 90% 12056 50140953
- # 7 Short captive Completed: unknown failure 90% 12056 50140953
- # 8 Short offline Completed: unknown failure 90% 12056 105703698
- # 9 Short offline Completed: unknown failure 90% 12056 88480991
- #10 Short offline Completed: unknown failure 90% 12056 97548216
- #11 Short offline Completed: unknown failure 90% 12056 100123334
- #12 Short offline Completed: unknown failure 90% 12056 48744363
- #13 Short captive Completed: unknown failure 90% 12037 88903960
- #14 Short offline Completed: unknown failure 90% 12037 70323166
- #15 Short captive Completed: unknown failure 90% 11999 50140953
- #16 Short offline Completed: unknown failure 90% 11999 35222713
- #17 Short offline Completed: unknown failure 90% 11987 46513801
- #18 Selective offline Completed: unknown failure 90% 11987 63052894
- #19 Short offline Completed: unknown failure 90% 11987 69631442
- #20 Short captive Completed: unknown failure 90% 11987 90310378
- #21 Short captive Completed: unknown failure 90% 12056 50140953
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 117210240 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement