U-Boot TPL 2020.10-1 (Oct 14 2020 - 10:55:00)
LPDDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=14 CS1 Row=14 CS=2 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.10-1 (Oct 14 2020 - 10:55:00 +0000)
Trying to boot from MMC1
Card did not respond to voltage select!
spl: mmc init failed with error: -95
Trying to boot from MMC2
NOTICE:  BL31: v2.3():80064e4
NOTICE:  BL31: Built : 10:55:00, Oct 14 2020
NOTICE:  BL31:Rockchip release version: v1.2


U-Boot 2020.10-1 (Oct 14 2020 - 10:55:00 +0000) Manjaro ARM

Model: Pine64 Rock64
DRAM:  1022 MiB
PMIC:  RK8050 (on=0x40, off=0x01)
MMC:   mmc@ff500000: 1, mmc@ff520000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: Pine64 Rock64
Net:   Could not get PHY for ethernet@ff540000: addr -1
No ethernet found.

Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
246 bytes read in 3 ms (80.1 KiB/s)
1:      Manjaro ARM
Retrieving file: /initramfs-4.14.198-ipfire.img
7437640 bytes read in 169 ms (42 MiB/s)
Retrieving file: /vmlinuz-4.14.198-ipfire
17648128 bytes read in 399 ms (42.2 MiB/s)
append: initrd=/initramfs-4.14.198-ipfire.img console=tty1 console=ttyS2,1500000 root=UUID=c8605c01-c412-4ee1-97f4-16732af6ef28 rw rootwait
Retrieving file: /dtb-4.14.198-ipfire/rockchip/rockchip-rockpie.dtb
37231 bytes read in 6 ms (5.9 MiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to 3d81b000, end 3df32d48 ... OK
   Loading Device Tree to 000000003d80e000, end 000000003d81a16e ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.14.198-ipfire (root@Manjaro-Beelink) (gcc version 10.2.0 (GCC)) #1 SMP Fri Dec 18 07:15:59 GMT 2020
Boot CPU: AArch64 Processor [410fd034]
Machine model: Radxa Rock Pi E
efi: Getting EFI parameters from FDT:
efi: UEFI not found.
cma: Reserved 8 MiB at 0x000000003f800000
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.0
random: get_random_bytes called from start_kernel+0xe0/0x664 with crng_init=0
percpu: Embedded 23 pages/cpu s53912 r8192 d32104 u94208
Detected VIPT I-cache on CPU0
CPU features: enabling workaround for ARM erratum 845719
Built 1 zonelists, mobility grouping on.  Total pages: 257544
Kernel command line: initrd=/initramfs-4.14.198-ipfire.img console=tty1 console=ttyS2,1500000 root=UUID=c8605c01-c412-4ee1-97f4-16732af6ef28 rw rootwait
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 994708K/1046528K available (9724K kernel code, 1362K rwdata, 3556K rodata, 2048K init, 479K bss, 43628K reserved, 8192K cma-reserved)
Virtual kernel memory layout:
    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
    vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
      .text : 0xffffff8008080000 - 0xffffff8008a00000   (  9728 KB)
    .rodata : 0xffffff8008a00000 - 0xffffff8008e00000   (  4096 KB)
      .init : 0xffffff8008e00000 - 0xffffff8009000000   (  2048 KB)
      .data : 0xffffff8009000000 - 0xffffff8009154a00   (  1363 KB)
       .bss : 0xffffff8009154a00 - 0xffffff80091cc840   (   480 KB)
    fixed   : 0xffffffbefe7f9000 - 0xffffffbefec00000   (  4124 KB)
    PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
    vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
              0xffffffbf00008000 - 0xffffffbf01000000   (    15 MB actual)
    memory  : 0xffffffc000200000 - 0xffffffc040000000   (  1022 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 31532 entries in 124 pages
Hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GIC: Using split EOI/Deactivate mode
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
ASID allocator initialised with 32768 entries
Hierarchical SRCU implementation.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
CPU1: Booted secondary processor [410fd034]
Detected VIPT I-cache on CPU2
CPU2: Booted secondary processor [410fd034]
Detected VIPT I-cache on CPU3
CPU3: Booted secondary processor [410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 1024 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered protocol family 16
cpuidle: using governor menu
vdso: 2 pages (1 code @ ffffff8008a06000, 1 data @ ffffff8009004000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
DMA: preallocated 256 KiB pool for atomic allocations
Serial: AMBA PL011 UART driver
ACPI: Interpreter disabled.
iommu: Adding device ff350000.video-codec to group 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
dmi: Firmware registration failed.
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7260K
hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=18 bucket_order=0
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
dma-pl330 ff1f0000.dmac:        DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
console [ttyS2] disabled
ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A
console [ttyS2] enabled
Serial: AMBA driver
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
dwc2 ff580000.usb: DWC OTG Controller
dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
dwc2 ff580000.usb: irq 31, io mem 0xff580000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 4.14.198-ipfire dwc2_hsotg
usb usb1: SerialNumber: ff580000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform ff5c0000.usb: EHCI Host Controller
ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
ehci-platform ff5c0000.usb: irq 32, io mem 0xff5c0000
ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.198-ipfire ehci_hcd
usb usb2: SerialNumber: ff5c0000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-orion: EHCI orion driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform ff5d0000.usb: Generic Platform OHCI controller
ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
ohci-platform ff5d0000.usb: irq 33, io mem 0xff5d0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Generic Platform OHCI controller
usb usb3: Manufacturer: Linux 4.14.198-ipfire ohci_hcd
usb usb3: SerialNumber: ff5d0000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Bridge firewalling registered
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'IPFire.org: Build time autogenerated kernel key: a6b82484b1c43e8f575eee8e1e05fcaf9c2bc815'
hctosys: unable to open rtc device (rtc0)
ttyS2 - failed to request DMA
Freeing unused kernel memory: 2048K
Checked W+X mappings: passed, no W+X pages found
dracut: dracut-038
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
udevd[209]: starting eudev-3.2.6


dracut Warning: Could not boot.
dracut Warning: Could not boot.
dracut Warning: /dev/disk/by-uuid/c8605c01-c412-4ee1-97f4-16732af6ef28 does not exist
dracut Warning: /dev/disk/by-uuid/c8605c01-c412-4ee1-97f4-16732af6ef28 does not exist


Generating "/run/initramfs/rdsosreport.txt"
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
after mounting them and attach it to a bug report.

To get more debug information in the report,
reboot with "rd.debug" added to the kernel command line.

Dropping to debug shell.

dracut:/#