Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Question 1 (1 point)
- Saved
- Which logic function can be implemented by connecting an inverter to the output of a NOR gate?
- Question 1 options:
- A)
- NAND
- B)
- OR
- C)
- AND
- D)
- NOR
- Question 2 (1 point)
- Which device is used in computer hardware to interpret the binary code of the computer instruction?
- Question 2 options:
- A)
- encoder
- B)
- demultiplexer
- C)
- multiplexer
- D)
- decoder
- Question 3 (1 point)
- A device which determines which of two numbers is greater is a
- Question 3 options:
- A)
- multiplexer.
- B)
- counter.
- C)
- comparator.
- D)
- decoder.
- Question 4 (1 point)
- What is the binary value of the BCD number: 1000 0001 (81)?
- Question 4 options:
- A)
- 1000 0000
- B)
- 0110 0011
- C)
- 0100 0001
- D)
- 0101 0001
- Question 5 (1 point)
- An even-parity checker indicates a parity error for which received data and parity bit?
- Question 5 options:
- A)
- data = 1110000
- parity = 1
- B)
- data = 0000000
- parity = 0
- C)
- data = 1001001
- parity = 0
- D)
- data = 1111111
- parity = 1
- Question 6 (1 point)
- What is the modulus of a counter which counts from 3 to 9 and back to 3 again?
- Question 6 options:
- A)
- MOD-9
- B)
- MOD-8
- C)
- MOD-7
- D)
- MOD-6
- Question 7 (1 point)
- A ________ is an electronic device used to convert an ac voltage into a dc voltage.
- Question 7 options:
- A)
- photo transistor
- B)
- Schmitt trigger
- C)
- pull-up resistor
- D)
- rectifier
- Question 8 (1 point)
- A counter whose individual flip-flops can toggle only when the previous flip-flop has toggled is
- Question 8 options:
- A)
- a ripple counter.
- B)
- a MOD-6 counter.
- C)
- an up-counter.
- D)
- a down-counter.
- Question 9 (1 point)
- Waveforms A and B represent the inputs to a NAND gate. During which time interval(s) will the output from the gate (X) be LOW?
- Question 9 options:
- A)
- never
- B)
- time intervals 2, 3, and 4
- C)
- time intervals 2 and 3
- D)
- time interval 2
- Question 10 (1 point)
- The Boolean equation for a NAND function is
- Question 10 options:
- A)
- X =
- B)
- X = AB
- C)
- X =
- D)
- X =
- Question 11 (1 point)
- An exclusive-NOR gate will invert the signal on input A if
- Question 11 options:
- A)
- the output is inverted.
- B)
- input B is HIGH.
- C)
- input B is LOW.
- D)
- input B is the opposite of input A.
- Question 12 (1 point)
- In an odd-parity system, the parity bit is one
- Question 12 options:
- A)
- when there is an even number of one bits in the data.
- B)
- when there is an odd number of one bits in the data.
- C)
- when there is an odd number of data bits.
- D)
- when there is an even number of one bits in the data and when there is an odd number of data bits.
- Question 13 (1 point)
- During which time interval(s) will output X of this XNOR timing diagram be HIGH?
- Question 13 options:
- A)
- time interval 1
- B)
- time intervals 1 and 5
- C)
- time intervals 2, 3, and 4
- D)
- time interval 5
- Question 14 (1 point)
- An octal-to-binary encoder has eight data inputs and encodes an output of ________ bits.
- Question 14 options:
- A)
- two
- B)
- three
- C)
- four
- D)
- five
- Question 15 (1 point)
- A flip-flop which operates according to military standards
- Question 15 options:
- A)
- allows greater range of voltage and temperature parameters.
- B)
- has the same parameters as ICs that meet commercial standards.
- C)
- requires closer regulation of voltage and temperature conditions.
- D)
- allows greater temperature range but less voltage range.
- Question 16 (1 point)
- In an odd-parity system, which of the following will generate a LOW (0) parity bit?
- Question 16 options:
- A)
- 1000001
- B)
- 0001101
- C)
- 1110001
- D)
- all of the above
- Question 17 (1 point)
- A transfer function is a graph of
- Question 17 options:
- A)
- voltage versus time.
- B)
- input voltage versus output voltage.
- C)
- speed versus time.
- D)
- HIGH versus LOW.
- Question 18 (1 point)
- Which Boolean equation results from this Karnaugh map?
- Question 18 options:
- A)
- (AB) + (C)
- B)
- ( ) + (C) + (BC)
- C)
- (ABC) +
- D)
- (A) + C
- Question 19 (1 point)
- The decimal equivalent of binary 10000110 is ________.
- Question 19 options:
- A)
- 11010
- B)
- 13410
- C)
- 12610
- D)
- 14410
- Question 20 (1 point)
- The simplest form of X = ( + )BC is ________.
- Question 20 options:
- A)
- BC
- B)
- = + B*C
- C)
- = + A*B*
- D)
- X = + B*C
- Question 21 (1 point)
- How many XOR gates does it take to make an 8-bit controlled inverter?
- Question 21 options:
- A)
- 4
- B)
- 8
- C)
- 16
- D)
- 32
- Question 22 (1 point)
- Two 7492 counters, one configured to count 0 to 11 and the other configured to count 0 to 1, are connected so that the Q3 output of the first is wired to the clock input of the second. What is the modulus of the total circuit?
- Question 22 options:
- A)
- MOD-20
- B)
- MOD-44
- C)
- MOD-12
- D)
- MOD-24
- Question 23 (1 point)
- Decoders used to drive common-anode LEDs must have
- Question 23 options:
- A)
- active LOW outputs.
- B)
- active HIGH outputs.
- C)
- a blanking output.
- D)
- low ripple characteristics.
- Question 24 (1 point)
- Anything ANDed with itself is equal to
- Question 24 options:
- A)
- 0.
- B)
- 1.
- C)
- itself.
- D)
- its complement.
- Question 25 (1 point)
- Where is the least significant Q output connected on a binary ripple counter?
- Question 25 options:
- A)
- to the SET input of the next flip-flop
- B)
- to the J input of the next flip-flop
- C)
- to the clock input of the next flip-flop
- D)
- to the K input of the next flip-flop
- Question 26 (1 point)
- Which type of flip-flop is referred to as "one's catching"?
- Question 26 options:
- A)
- R-S
- B)
- D
- C)
- J-K
- D)
- toggle
- Question 27 (1 point)
- What is the difference between the 74192 and the 74193 counter?
- Question 27 options:
- A)
- The 74192 is the only one that can parallel load.
- B)
- The 74192 is asynchronous; the 74193 is synchronous.
- C)
- The 74192 is a BCD counter; the 74193 is a binary counter.
- D)
- The 74192 counts down; the 74193 counts up.
- Question 28 (1 point)
- Saved
- To which pin is Vcc connected on a 7476 flip-flop? (Refer to Figure 11-11 in your textbook.)
- Question 28 options:
- A)
- pin 7
- B)
- pin 16
- C)
- pin 5
- D)
- pin 13
- Question 29 (1 point)
- Which equation demonstrates the Commutative Law?
- Question 29 options:
- A)
- A(BC) = (AB)C
- B)
- A + BC = AB + C
- C)
- C + AB = AB + C
- D)
- C + B + A = ABC
- Question 30 (1 point)
- The simplest form of X = A(B + C) + B is ________.
- Question 30 options:
- A)
- X = AB + B
- B)
- X = AC
- C)
- X = B + AC
- D)
- X = AC + B
Advertisement
Add Comment
Please, Sign In to add comment