ESPDisplayFail

INFO ESPHome 2025.2.0
INFO Reading configuration /config/esphome/esp32lcddisplay.yaml...
INFO Consider enabling PSRAM if available for the display buffer
INFO Generating C++ source...
INFO Compiling app...
Processing esp32lcddisplay (board: esp32-s2-saola-1; framework: arduino; platform: platformio/[email protected])
--------------------------------------------------------------------------------
HARDWARE: ESP32S2 240MHz, 320KB RAM, 4MB Flash
 - toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
 - toolchain-xtensa-esp32s2 @ 8.4.0+2021r2-patch5
Dependency Graph
|-- AsyncTCP-esphome @ 2.1.4
|-- WiFi @ 2.0.0
|-- FS @ 2.0.0
|-- Update @ 2.0.0
|-- ESPAsyncWebServer-esphome @ 3.2.2
|-- DNSServer @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- noise-c @ 0.1.6
|-- SPI @ 2.0.0
|-- ArduinoJson @ 6.18.5
Compiling .pioenvs/esp32lcddisplay/src/main.cpp.o
Linking .pioenvs/esp32lcddisplay/firmware.elf
RAM:   [=         ]  13.6% (used 44484 bytes from 327680 bytes)
Flash: [=====     ]  51.5% (used 945350 bytes from 1835008 bytes)
Building .pioenvs/esp32lcddisplay/firmware.bin
Creating esp32s2 image...
Successfully created esp32s2 image.
esp32_create_combined_bin([".pioenvs/esp32lcddisplay/firmware.bin"], [".pioenvs/esp32lcddisplay/firmware.elf"])
Wrote 0xf6e50 bytes to file /data/build/esp32lcddisplay/.pioenvs/esp32lcddisplay/firmware.factory.bin, ready to flash to offset 0x0
esp32_copy_ota_bin([".pioenvs/esp32lcddisplay/firmware.bin"], [".pioenvs/esp32lcddisplay/firmware.elf"])
========================= [SUCCESS] Took 11.10 seconds =========================
INFO Successfully compiled program.
INFO Connecting to 192.168.1.22 port 3232...
INFO Connected to 192.168.1.22
INFO Uploading /data/build/esp32lcddisplay/.pioenvs/esp32lcddisplay/firmware.bin (945744 bytes)
Uploading: [============================================================] 100% Done...

INFO Upload took 9.90 seconds, waiting for result...
INFO OTA successful
INFO Successfully uploaded program.
INFO Starting log output from 192.168.1.22 using esphome API
INFO Successfully connected to esp32lcddisplay @ 192.168.1.22 in 7.168s
INFO Successful handshake with esp32lcddisplay @ 192.168.1.22 in 0.073s
[14:27:52][I][app:100]: ESPHome version 2025.2.0 compiled on Feb 26 2025, 14:27:25
[14:27:52][C][wifi:600]: WiFi:
[14:27:52][C][wifi:428]:   Local MAC: 48:27:E2:50:78:20
[14:27:52][C][wifi:433]:   SSID: [redacted]
[14:27:52][C][wifi:436]:   IP Address: 192.168.1.22
[14:27:52][C][wifi:440]:   BSSID: [redacted]
[14:27:52][C][wifi:441]:   Hostname: 'esp32lcddisplay'
[14:27:52][C][wifi:443]:   Signal strength: -40 dB ▂▄▆█
[14:27:52][C][wifi:447]:   Channel: 1
[14:27:52][C][wifi:448]:   Subnet: 255.255.255.0
[14:27:52][C][wifi:449]:   Gateway: 192.168.1.1
[14:27:52][C][wifi:450]:   DNS1: 58.96.9.5
[14:27:52][C][wifi:451]:   DNS2: 220.233.0.4
[14:27:52][C][logger:177]: Logger:
[14:27:52][C][logger:178]:   Max Level: DEBUG
[14:27:52][C][logger:179]:   Initial Level: DEBUG
[14:27:52][C][logger:181]:   Log Baud Rate: 0
[14:27:52][C][logger:182]:   Hardware UART: USB_CDC
[14:27:52][C][logger:186]:   Level for 'component': ERROR
[14:27:52][C][spi:068]: SPI bus:
[14:27:52][C][spi:069]:   CLK Pin: GPIO40
[14:27:52][C][spi:070]:   SDI Pin: GPIO41
[14:27:52][C][spi:071]:   SDO Pin: GPIO39
[14:27:52][C][spi:076]:   Using HW SPI: SPI
[14:27:52][C][ili9xxx:091]: ili9xxx
[14:27:52][C][ili9xxx:091]:   Rotations: 0 °
[14:27:52][C][ili9xxx:091]:   Dimensions: 480px x 320px
[14:27:52][C][ili9xxx:092]:   Width Offset: 0
[14:27:52][C][ili9xxx:093]:   Height Offset: 0
[14:27:52][C][ili9xxx:099]:   Color mode: 16bit
[14:27:52][C][ili9xxx:106]:   18-Bit Mode: YES
[14:27:52][C][ili9xxx:108]:   Data rate: 40MHz
[14:27:52][C][ili9xxx:110]:   Reset Pin: GPIO33
[14:27:52][C][ili9xxx:111]:   CS Pin: GPIO38
[14:27:52][C][ili9xxx:112]:   DC Pin: GPIO21
[14:27:52][C][ili9xxx:114]:   Color order: BGR
[14:27:52][C][ili9xxx:115]:   Swap_xy: YES
[14:27:52][C][ili9xxx:116]:   Mirror_x: NO
[14:27:52][C][ili9xxx:117]:   Mirror_y: NO
[14:27:52][C][ili9xxx:118]:   Invert colors: NO
[14:27:52][C][ili9xxx:121]:   => Failed to init Memory: YES!
[14:27:52][C][ili9xxx:123]:   Update Interval: 1.0s
[14:27:52][E][component:082]:   Component display is marked FAILED
[14:27:52][D][homeassistant.sensor:024]: 'sensor.esp_6channelyaml_temp_3_liv_room': Got state 24.90