Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2018 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.2-STABLE #0 r325575+fc3d65faae6(freenas/11.2-stable): Wed Dec 5 15:08:42 EST 2018
- root@nemesis.tn.ixsystems.com:/freenas-11.2-releng/freenas/_BE/objs/freenas-11.2-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
- FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
- VT(vga): resolution 640x480
- CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz (2500.06-MHz K8-class CPU)
- Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
- AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
- Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
- XSAVE Features=0x1<XSAVEOPT>
- VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
- TSC: P-state invariant, performance statistics
- real memory = 51539607552 (49152 MB)
- avail memory = 49975693312 (47660 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <DELL PE_SC3 >
- FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
- FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
- WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
- ioapic1: Changing APIC ID to 1
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- ioapic1 <Version 2.0> irqs 32-55 on motherboard
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #6 Launched!
- SMP: AP CPU #5 Launched!
- SMP: AP CPU #7 Launched!
- SMP: AP CPU #4 Launched!
- SMP: AP CPU #10 Launched!
- SMP: AP CPU #3 Launched!
- SMP: AP CPU #9 Launched!
- SMP: AP CPU #8 Launched!
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #11 Launched!
- Timecounter "TSC-low" frequency 1250028431 Hz quality 1000
- random: entropy device external interface
- random: registering fast source Intel Secure Key RNG
- random: fast provider: "Intel Secure Key RNG"
- kbd1 at kbdmux0
- nexus0
- vtvga0: <VT VGA driver> on motherboard
- cryptosoft0: <software crypto> on motherboard
- aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
- padlock0: No ACE support.
- acpi0: <DELL PE_SC3> on motherboard
- acpi0: Power Button (fixed)
- ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
- ipmi0: KCS mode found at io 0xca8 on acpi
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- cpu4: <ACPI CPU> on acpi0
- cpu5: <ACPI CPU> on acpi0
- cpu6: <ACPI CPU> on acpi0
- cpu7: <ACPI CPU> on acpi0
- cpu8: <ACPI CPU> on acpi0
- cpu9: <ACPI CPU> on acpi0
- cpu10: <ACPI CPU> on acpi0
- cpu11: <ACPI CPU> on acpi0
- atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
- atrtc0: registered as a time-of-day clock, resolution 1.000000s
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 350
- Event timer "HPET1" frequency 14318180 Hz quality 340
- Event timer "HPET2" frequency 14318180 Hz quality 340
- Event timer "HPET3" frequency 14318180 Hz quality 340
- Event timer "HPET4" frequency 14318180 Hz quality 340
- Event timer "HPET5" frequency 14318180 Hz quality 340
- Event timer "HPET6" frequency 14318180 Hz quality 340
- Event timer "HPET7" frequency 14318180 Hz quality 340
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
- pci0: <ACPI PCI bus> numa-domain 0 on pcib0
- pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0
- pci1: <ACPI PCI bus> numa-domain 0 on pcib1
- mpr0: <Avago Technologies (LSI) SAS3008> port 0xfc00-0xfcff mem 0xd8ff0000-0xd8ffffff,0xd8f80000-0xd8fbffff irq 34 at device 0.0 numa-domain 0 on pci1
- mpr0: Firmware: 16.00.01.00, Driver: 18.03.00.00-fbsd
- mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
- pcib2: <ACPI PCI-PCI bridge> irq 53 at device 1.1 numa-domain 0 on pci0
- pci2: <ACPI PCI bus> numa-domain 0 on pcib2
- pcib3: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0
- pci3: <ACPI PCI bus> numa-domain 0 on pcib3
- pci3: <network, ethernet> at device 0.0 (no driver attached)
- pcib4: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0
- pci4: <PCI bus> numa-domain 0 on pcib4
- pci0: <simple comms> at device 22.0 (no driver attached)
- pci0: <simple comms> at device 22.1 (no driver attached)
- ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdc0fe000-0xdc0fe3ff irq 23 at device 26.0 numa-domain 0 on pci0
- usbus0: EHCI version 1.0
- usbus0 numa-domain 0 on ehci0
- usbus0: 480Mbps High Speed USB v2.0
- pcib5: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
- pci5: <ACPI PCI bus> numa-domain 0 on pcib5
- pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0
- pci6: <ACPI PCI bus> numa-domain 0 on pcib6
- bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd58a0000-0xd58affff,0xd58b0000-0xd58bffff,0xd58c0000-0xd58cffff irq 16 at device 0.0 numa-domain 0 on pci6
- bge0: APE FW version: NCSI v1.4.22.0
- bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
- miibus0: <MII bus> numa-domain 0 on bge0
- brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
- brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bge0: Using defaults for TSO: 65518/35/2048
- bge0: Ethernet address: f8:bc:12:44:47:c4
- bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd58d0000-0xd58dffff,0xd58e0000-0xd58effff,0xd58f0000-0xd58fffff irq 17 at device 0.1 numa-domain 0 on pci6
- bge1: APE FW version: NCSI v1.4.22.0
- bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
- miibus1: <MII bus> numa-domain 0 on bge1
- brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
- brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bge1: Using defaults for TSO: 65518/35/2048
- bge1: Ethernet address: f8:bc:12:44:47:c6
- pcib7: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci0
- pci7: <ACPI PCI bus> numa-domain 0 on pcib7
- pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0
- pci8: <ACPI PCI bus> numa-domain 0 on pcib8
- pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
- pci9: <PCI bus> numa-domain 0 on pcib9
- pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
- pci10: <PCI bus> numa-domain 0 on pcib10
- pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
- pci11: <PCI bus> numa-domain 0 on pcib11
- vgapci0: <VGA-compatible display> mem 0xd4000000-0xd4ffffff,0xdb7fc000-0xdb7fffff,0xda800000-0xdaffffff irq 19 at device 0.0 numa-domain 0 on pci11
- vgapci0: Boot video device
- pcib12: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci9
- pci12: <PCI bus> numa-domain 0 on pcib12
- ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdc0ff000-0xdc0ff3ff irq 22 at device 29.0 numa-domain 0 on pci0
- usbus1: EHCI version 1.0
- usbus1 numa-domain 0 on ehci1
- usbus1: 480Mbps High Speed USB v2.0
- pcib13: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
- pci13: <PCI bus> numa-domain 0 on pcib13
- isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
- isa0: <ISA bus> numa-domain 0 on isab0
- atapci0: <Intel Patsburg SATA600 controller> port 0xecd0-0xecd7,0xecf0-0xecf3,0xecd8-0xecdf,0xecf4-0xecf7,0xec90-0xec9f,0xeca0-0xecaf irq 20 at device 31.2 numa-domain 0 on pci0
- ata2: <ATA channel> at channel 0 on atapci0
- ata3: <ATA channel> at channel 1 on atapci0
- atapci1: <Intel Patsburg SATA300 controller> port 0xece0-0xece7,0xecf8-0xecfb,0xece8-0xecef,0xecfc-0xecff,0xecb0-0xecbf,0xecc0-0xeccf irq 21 at device 31.5 numa-domain 0 on pci0
- ata4: <ATA channel> at channel 0 on atapci1
- ata5: <ATA channel> at channel 1 on atapci1
- pcib14: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
- pci14: <ACPI PCI bus> numa-domain 0 on pcib14
- pci14: <dasp, performance counters> at device 14.1 (no driver attached)
- pci14: <dasp, performance counters> at device 19.1 (no driver attached)
- pci14: <dasp, performance counters> at device 19.5 (no driver attached)
- pcib15: <ACPI Host-PCI bridge> on acpi0
- pci15: <ACPI PCI bus> on pcib15
- uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- ichwd0: <Intel Patsburg watchdog timer> on isa0
- orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
- coretemp0: <CPU On-Die Thermal Sensors> on cpu0
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est0 attach returned 6
- coretemp1: <CPU On-Die Thermal Sensors> on cpu1
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est1 attach returned 6
- coretemp2: <CPU On-Die Thermal Sensors> on cpu2
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est2 attach returned 6
- coretemp3: <CPU On-Die Thermal Sensors> on cpu3
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est3 attach returned 6
- coretemp4: <CPU On-Die Thermal Sensors> on cpu4
- est4: <Enhanced SpeedStep Frequency Control> on cpu4
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est4 attach returned 6
- coretemp5: <CPU On-Die Thermal Sensors> on cpu5
- est5: <Enhanced SpeedStep Frequency Control> on cpu5
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est5 attach returned 6
- coretemp6: <CPU On-Die Thermal Sensors> on cpu6
- est6: <Enhanced SpeedStep Frequency Control> on cpu6
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est6 attach returned 6
- coretemp7: <CPU On-Die Thermal Sensors> on cpu7
- est7: <Enhanced SpeedStep Frequency Control> on cpu7
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est7 attach returned 6
- coretemp8: <CPU On-Die Thermal Sensors> on cpu8
- est8: <Enhanced SpeedStep Frequency Control> on cpu8
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est8 attach returned 6
- coretemp9: <CPU On-Die Thermal Sensors> on cpu9
- est9: <Enhanced SpeedStep Frequency Control> on cpu9
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est9 attach returned 6
- coretemp10: <CPU On-Die Thermal Sensors> on cpu10
- est10: <Enhanced SpeedStep Frequency Control> on cpu10
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est10 attach returned 6
- coretemp11: <CPU On-Die Thermal Sensors> on cpu11
- est11: <Enhanced SpeedStep Frequency Control> on cpu11
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 1fb400001c00
- device_attach: est11 attach returned 6
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- Timecounters tick every 1.000 msec
- freenas_sysctl: adding account.
- freenas_sysctl: adding directoryservice.
- freenas_sysctl: adding middlewared.
- freenas_sysctl: adding network.
- freenas_sysctl: adding services.
- ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
- ipmi0: IPMI device rev. 1, firmware rev. 2.60, version 2.0
- ipmi0: Number of channels 6
- ipmi0: Attached watchdog
- ugen0.1: <Intel EHCI root HUB> at usbus0
- ugen1.1: <Intel EHCI root HUB> at usbus1
- uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- mpr0: SAS Address for SATA device = x
- mpr0: SAS Address for SATA device = x
- mpr0: SAS Address for SATA device = x
- mpr0: SAS Address for SATA device = x
- mpr0: SAS Address for SATA device = x
- mpr0: SAS Address for SATA device = x
- mpr0: SAS Address for SATA device = x
- mpr0: SAS Address for SATA device = x
- mpr0: SAS Address from SAS device page0 = x
- mpr0: SAS Address from SATA device = x
- mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0009> enclosureHandle<0x0001> slot 3
- mpr0: At enclosure level 0 and connector name ( )
- mpr0: SAS Address from SAS device page0 = x
- mpr0: SAS Address from SATA device = x
- mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000a> enclosureHandle<0x0001> slot 2
- mpr0: At enclosure level 0 and connector name ( )
- mpr0: SAS Address from SAS device page0 = x
- mpr0: SAS Address from SATA device = x
- mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000b> enclosureHandle<0x0001> slot 0
- mpr0: At enclosure level 0 and connector name ( )
- mpr0: SAS Address from SAS device page0 = x
- mpr0: SAS Address from SATA device = x
- mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000c> enclosureHandle<0x0001> slot 1
- mpr0: At enclosure level 0 and connector name ( )
- mpr0: SAS Address from SAS device page0 = x
- mpr0: SAS Address from SATA device = x
- mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000d> enclosureHandle<0x0001> slot 7
- mpr0: At enclosure level 0 and connector name ( )
- mpr0: SAS Address from SAS device page0 = x
- mpr0: SAS Address from SATA device = x
- mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000f> enclosureHandle<0x0001> slot 6
- mpr0: At enclosure level 0 and connector name ( )
- mpr0: SAS Address from SAS device page0 = x
- mpr0: SAS Address from SATA device = x
- mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000e> enclosureHandle<0x0001> slot 4
- mpr0: At enclosure level 0 and connector name ( )
- mpr0: SAS Address from SAS device page0 = x
- mpr0: SAS Address from SATA device = x
- mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0010> enclosureHandle<0x0001> slot 5
- mpr0: At enclosure level 0 and connector name ( )
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
- uhub2 numa-domain 0 on uhub0
- uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
- ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
- uhub3 numa-domain 0 on uhub1
- uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
- uhub2: 6 ports with 6 removable, self powered
- uhub3: 8 ports with 8 removable, self powered
- ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
- uhub4 numa-domain 0 on uhub2
- uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0
- uhub4: 6 ports with 6 removable, self powered
- ugen0.4: <Avocent KeyboardMouse Function> at usbus0
- ukbd0 numa-domain 0 on uhub4
- ukbd0: <Keyboard> on usbus0
- kbd2 at ukbd0
- ada0 at ata4 bus 0 scbus3 target 0 lun 0
- ada0: <SPCC Solid State Disk S9FM02.8> ACS-3 ATA SATA 3.x device
- ada0: Serial Number x
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
- ada0: 57241MB (117231408 512 byte sectors)
- ada1 at ata5 bus 0 scbus4 target 0 lun 0
- ada1: <SPCC Solid State Disk S9FM02.8> ACS-3 ATA SATA 3.x device
- ada1: Serial Number x
- ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
- ada1: 57241MB (117231408 512 byte sectors)
- da1 at mpr0 bus 0 scbus0 target 1 lun 0
- da2 at mpr0 bus 0 scbus0 target 2 lun 0
- da1: <ATA WDC WD100EMAZ-00 0A83> Fixed Direct Access SPC-4 SCSI device
- da1: Serial Number x
- da1: 600.000MB/s transfers
- da1: Command Queueing enabled
- da1: 9537536MB (19532873728 512 byte sectors)
- da4 at mpr0 bus 0 scbus0 target 4 lun 0
- da2: <ATA WDC WD100EMAZ-00 0A83> Fixed Direct Access SPC-4 SCSI device
- da2: Serial Number x
- da2: 600.000MB/s transfers
- da2: Command Queueing enabled
- da4: <ATA WDC WD100EMAZ-00 0A83> Fixed Direct Access SPC-4 SCSI device
- da4: Serial Number x
- da4: 600.000MB/s transfers
- da4: Command Queueing enabled
- da4: 9537536MB (19532873728 512 byte sectors)
- da7 at mpr0 bus 0 scbus0 target 7 lun 0
- da2: 9537536MB (19532873728 512 byte sectors)
- da5 at mpr0 bus 0 scbus0 target 5 lun 0
- da7: <ATA WDC WD100EMAZ-00 0A83> Fixed Direct Access SPC-4 SCSI device
- da7: Serial Number x
- da7: 600.000MB/s transfersda5: <ATA WDC WD100EMAZ-00 0A83> Fixed Direct Access SPC-4 SCSI device
- da5: Serial Number x
- da5: 600.000MB/s transfers
- da7: Command Queueing enabled
- da7: 9537536MB (19532873728 512 byte sectors)
- da5: Command Queueing enabled
- da5: 9537536MB (19532873728 512 byte sectors)
- da3 at mpr0 bus 0 scbus0 target 3 lun 0
- da3: <ATA WDC WD100EMAZ-00 0A83> Fixed Direct Access SPC-4 SCSI device
- da3: Serial Number x
- da3: 600.000MB/s transfers
- da3: Command Queueing enabled
- da3: 9537536MB (19532873728 512 byte sectors)
- da0 at mpr0 bus 0 scbus0 target 0 lun 0
- da0: <ATA WDC WD100EMAZ-00 0A83> Fixed Direct Access SPC-4 SCSI device
- da0: Serial Number x
- da0: 600.000MB/s transfers
- da0: Command Queueing enabled
- da0: 9537536MB (19532873728 512 byte sectors)
- da6 at mpr0 bus 0 scbus0 target 6 lun 0
- da6: <ATA WDC WD100EMAZ-00 0A83> Fixed Direct Access SPC-4 SCSI device
- da6: Serial Number x
- da6: 600.000MB/s transfers
- da6: Command Queueing enabled
- da6: 9537536MB (19532873728 512 byte sectors)
- random: unblocking device.
- mlx4_core0: <mlx4_core> mem 0xd9f00000-0xd9ffffff,0xd5000000-0xd57fffff irq 48 at device 0.0 numa-domain 0 on pci3
- mlx4_core: Mellanox ConnectX core driver v3.4.1 (October 2017)
- mlx4_core: Initializing mlx4_core
- mlx4_core0: Old device ETS support detected
- mlx4_core0: Consider upgrading device FW.
- mlx4_core0: Unable to determine PCI device chain minimum BW
- mlx4_en mlx4_core0: Activating port:1
- mlxen0: Ethernet address: x
- mlx4_en: mlx4_core0: Port 1: Using 12 TX rings
- mlxen0: link state changed to DOWN
- mlx4_en: mlx4_core0: Port 1: Using 8 RX rings
- mlx4_en: mlxen0: Using 12 TX rings
- mlx4_en: mlxen0: Using 8 RX rings
- mlx4_en: mlxen0: Initializing port
- Trying to mount root from zfs:freenas-boot/ROOT/11.2-RELEASE []...
- Error: attempt to write a readonly database
- [: =: unexpected operator
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- [: : bad number
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- [: : bad number
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- Error: attempt to write a readonly database
- <118>middlewared: starting middlewared: loading plugins middlewared: resolving plugins schemas middlewared: setting up plugins (pool) [1/17] middlewared: setting up plugins (zfs) [2/17] middlewared: setting up plugins (ipmi) [3/17] middlewared: setting up plugins (alert) [4/17] middlewared: setting up plugins (system) [5/17] middlewared: setting up plugins (filesystem) [6/17] middlewared: setting up plugins (auth) [7/17] middlewared: setting up plugins (disk) [8/17] middlewared: setting up plugins (mdns) [9/17] middlewared: setting up plugins (cloud_sync) [10/17] middlewared: setting up plugins (device) [11/17] middlewared: setting up plugins (trueview) [12/17] middlewared: setting up plugins (vm) [13/17] middlewared: setting up plugins (service_monitor) [14/17] middlewared: setting up plugins (network) [15/17] middlewared: setting up plugins (unscheduled_reboot_alert) [middlewared: setting up plugins (jail) [17/17] middlewared: registering services middlewared: loading completed
- Loading early kernel modules:
- Syncing disks...
- \^[[2K\^[[A\^[[2KTotal Progress: [________________________________________] 0.00%\^[[2K\^[[A\^[[2KTotal Progress: [########################################] 100.00%
- GEOM_MIRROR: Device mirror/swap0 launched (2/2).
- GEOM_MIRROR: Device mirror/swap1 launched (2/2).
- GEOM_MIRROR: Device mirror/swap2 launched (2/2).
- GEOM_MIRROR: Device mirror/swap3 launched (2/2).
- GEOM_ELI: Device mirror/swap0.eli created.
- GEOM_ELI: Encryption: AES-XTS 128
- GEOM_ELI: Crypto: hardware
- GEOM_ELI: Device mirror/swap1.eli created.
- GEOM_ELI: Encryption: AES-XTS 128
- GEOM_ELI: Crypto: hardware
- GEOM_ELI: Device mirror/swap2.eli created.
- GEOM_ELI: Encryption: AES-XTS 128
- GEOM_ELI: Crypto: hardware
- GEOM_ELI: Device mirror/swap3.eli created.
- GEOM_ELI: Encryption: AES-XTS 128
- GEOM_ELI: Crypto: hardware
- Setting hostuuid: x
- Setting hostid: x
- Starting file system checks:
- Mounting local filesystems:.
- freenas.services.smb.config.server_min_protocol: SMB2_02 -> NT1
- Beginning ZFS volume imports
- Importing 5696580217401300428
- cannot import '5696580217401300428': no such pool available
- cannot import '5696580217401300428': no such pool available
- Importing RAIDZ1Pool
- <118> disk vdev '/dev/gptid/051e4f92-059b-11e9-928b-a0369f1e306a': best uberblock found for spa $import. txg 187393 spa_load($import, config untrusted): using uberblock with txg=187393 spa_load($import, config trusted): LOADED spa_load($import, config trusted): UNLOADING spa_import: importing RAIDZ1Pool spa_load(RAIDZ1Pool, config trusted): LOADING disk vdev '/dev/gptid/051e4f92-059b-11e9-928b-a0369f1e306a': best uberblock found for spa RAIDZ1Pool. txg 187393 spa_load(RAIDZ1Pool, config untrusted): using uberblock with txg=187393 spa=RAIDZ1Pool async request task=1 spa_load(RAIDZ1Pool, config trusted): LOADED txg 187395 open pool version 5000; software version 5000/5; uts 11.2-STABLE 1102500 amd64 condensing: txg 187395, msp[79] 0xfffff800c42e5000, vdev id 0, spa RAIDZ1Pool, smp size 72344, segments 889, forcing condense=FALSE condensing: txg 187395, msp[60] 0xfffff800c431d000, vdev id 0, spa RAIDZ1Pool, smp size 66776, segments 149, forcing condense=FALSE condensing: txg 187395, msp[78] 0xfffff800c42e8c00, vdev id 0, spa RAIDZ1Pool, smp size 66712, segments 114, forcing condense=FALSE condensing: txg 187395, msp[59] 0xfffff800c4320c00, vdev id 0, spa RAIDZ1Pool, smp size 83568, segments 2798, forcing condense=FALSE condensing: txg 187395, msp[77] 0xfffff800c42ecc00, vdev id 0, spa RAIDZ1Pool, smp size 65632, segments 10, forcing condense=FALSE condensing: txg 187395, msp[58] 0xfffff800c4324800, vdev id 0, spa RAIDZ1Pool, smp size 86432, segments 3967, forcing condense=FALSE condensing: txg 187395, msp[88] 0xfffff800c42cf400, vdev id 0, spa RAIDZ1Pool, smp size 65696, segments 14, forcing condense=FALSE condensing: txg 187395, msp[87] 0xfffff800c42d4000, vdev id 0, spa RAIDZ1Pool, smp size 66032, segments 50, forcing condense=FALSE condensing: txg 187395, msp[85] 0xfffff80012ad7c00, vdev id 0, spa RAIDZ1Pool, smp size 65864, segments 40, forcing condense=FALSE condensing: txg 187395, msp[84] 0xfffff800c42d8c00, vdev id 0, spa RAIDZ1Pool, smp size 65688, segments 16, forcing condense=FALSE condensing: txg 187395, msp[83] 0xfffff800c42dc800, vdev id 0, spa RAIDZ1Pool, smp size 65768, segments 27, forcing condense=FALSE condensing: txg 187395, msp[82] 0xfffff800c42e0400, vdev id 0, spa RAIDZ1Pool, smp size 65696, segments 15, forcing condense=FALSE condensing: txg 187395, msp[61] 0xfffff800c431fc00, vdev id 0, spa RAIDZ1Pool, smp size 66488, segments 111, forcing condense=FALSE condensing: txg 187395, msp[80] 0xfffff800c42e7c00, vdev id 0, spa RAIDZ1Pool, smp size 68664, segments 383, forcing condense=FALSE spa=RAIDZ1Pool async request task=32 txg 187397 import pool version 5000; software version 5000/5; uts 11.2-STABLE 1102500 amd64 condensing: txg 187397, msp[79] 0xfffff800c42e5000, vdev id 0, spa RAIDZ1Pool, smp size 70096, segments 889, forcing condense=FALSE condensing: txg 187397, msp[80] 0xfffff800c42e7c00, vdev id 0, spa RAIDZ1Pool, smp size 68600, segments 383, forcing condense=FALSE condensing: txg 187397, msp[60] 0xfffff800c431d000, vdev id 0, spa RAIDZ1Pool, smp size 66824, segments 148, forcing condense=FALSE condensing: txg 187397, msp[59] 0xfffff800c4320c00, vdev id 0, spa RAIDZ1Pool, smp size 83680, segments 2785, forcing condense=FALSE condensing: txg 187397, msp[58] 0xfffff800c4324800, vdev id 0, spa RAIDZ1Pool, smp size 86736, segments 3934, forcing condense=FALSE condensing: txg 187397, msp[77] 0xfffff800c42ecc00, vdev id 0, spa RAIDZ1Pool, smp size 65632, segments 10, forcing condense=FALSE condensing: txg 187397, msp[61] 0xfffff800c431fc00, vdev id 0, spa RAIDZ1Pool, smp size 66464, segments 107, forcing condense=FALSE condensing: txg 187397, msp[78] 0xfffff800c42e8c00, vdev id 0, spa RAIDZ1Pool, smp size 66376, segments 114, forcing condense=FALSE
- ZFS volume imports complete
- Loading kernel modules:
- hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
- Setting hostname: freenas.
- Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
- Feeding entropy: .
- ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/e2fsprogs /usr/local/lib/nss /usr/local/lib/perl5/5.26/mach/CORE
- 32-bit compatibility ldconfig path: /usr/lib32
- Starting Network: lo0 bge0 bge1 mlxen0.
- lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
- options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
- inet6 ::1 prefixlen 128
- inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
- inet 127.0.0.1 netmask 0xff000000
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- groups: lo
- bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
- ether x
- hwaddr x
- nd6 options=9<PERFORMNUD,IFDISABLED>
- media: Ethernet autoselect
- bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
- ether x
- hwaddr x
- nd6 options=9<PERFORMNUD,IFDISABLED>
- media: Ethernet autoselect
- mlxen0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=ed07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
- ether x
- hwaddr x
- nd6 options=9<PERFORMNUD,IFDISABLED>
- media: Ethernet autoselect (autoselect <full-duplex,rxpause,txpause>)
- status: active
- Starting devd.
- ums0 numa-domain 0 on uhub4
- ums0: <Mouse> on usbus0
- ums0: 3 buttons and [Z] coordinates ID=0
- ums1 numa-domain 0 on uhub4
- ums1: <Mouse REL> on usbus0
- ums1: 3 buttons and [XYZ] coordinates ID=0
- Starting ums0 moused.
- Starting ums1 moused.
- add host 127.0.0.1: gateway lo0 fib 0: route already in table
- add host ::1: gateway lo0 fib 0: route already in table
- add net fe80::: gateway ::1
- add net ff02::: gateway ::1
- add net ::ffff:0.0.0.0: gateway ::1
- add net ::0.0.0.0: gateway ::1
- Dec 23 02:24:58 mDNSResponder: mDNSResponder (Engineering Build) (Dec 5 2018 20:17:22) starting
- Dec 23 02:24:58 mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
- Dec 23 02:24:58 mDNSResponder: mDNSPlatformSourceAddrForDest: connect 1.1.1.1 failed errno 51 (Network is unreachable)
- Creating and/or trimming log files.
- Starting syslog_ng.
- Starting watchdogd.
- Dec 23 02:25:00 freenas kernel: mlx4_en: mlx4_core0: Port 1: Using 12 TX rings
- Dec 23 02:25:00 freenas kernel: mlx4_en: mlx4_core0: Port 1: Using 8 RX rings
- Dec 23 02:25:00 freenas kernel: mlx4_en: mlxen0: Using 12 TX rings
- Dec 23 02:25:00 freenas kernel: mlx4_en: mlxen0: Using 8 RX rings
- Dec 23 02:25:00 freenas kernel: mlx4_en: mlxen0: Initializing port
- Setting up system for textdumps.
- debug.ddb.textdump.pending: 0 -> 1
- debug.debugger_on_panic: 1 -> 1
- debug.ddb.capture.bufsize: 49152 -> 4194304
- Alarm clock
- Starting mountd.
- NFSv4 is disabled
- Starting nfsd.
- nfsd: can't register svc name
- Starting statd.
- Starting lockd.
- Performing sanity check on openssh configuration.
- Starting openssh.
- Updating motd:.
- Mounting late filesystems:.
- Starting ntpd.
- Can't load /usr/local/etc/smb4.conf - run testparm to debug it
- Performing sanity check on Samba configuration: OK
- Starting nmbd.
- Starting smbd.
- Starting winbindd.
- Starting smartd_daemon.
- Found /usr/local/etc/rsyncd.conf in old location. Migrating to /usr/local/etc/rsync/rsyncd.conf.
- Starting rsyncd.
- Performing sanity check on nginx configuration:
- nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
- nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
- Starting nginx.
- Starting dbus.
- Starting mdnsd.
- install: mkdir : No such file or directory
- /etc/rc: WARNING: failed precmd routine for minio
- Starting collectd.
- plugin_load: plugin "aggregation" successfully loaded.
- plugin_load: plugin "cpu" successfully loaded.
- plugin_load: plugin "cputemp" successfully loaded.
- plugin_load: plugin "ctl" successfully loaded.
- plugin_load: plugin "df" successfully loaded.
- plugin_load: plugin "disk" successfully loaded.
- plugin_load: plugin "exec" successfully loaded.
- plugin_load: plugin "geom_stat" successfully loaded.
- plugin_load: plugin "interface" successfully loaded.
- plugin_load: plugin "load" successfully loaded.
- plugin_load: plugin "memory" successfully loaded.
- plugin_load: plugin "network" successfully loaded.
- plugin_load: plugin "processes" successfully loaded.
- plugin_load: plugin "python" successfully loaded.
- plugin_load: plugin "rrdtool" successfully loaded.
- plugin_load: plugin "swap" successfully loaded.
- plugin_load: plugin "uptime" successfully loaded.
- Syncing multipaths...
- Flushed all rules.
- Starting zfsd.
- Configuring vt: blanktime.
- Starting cron.
- Sun Dec 23 02:25:13 MST 2018
- NLM: failed to contact remote rpcbind, stat = 5, port = 28416
- pid 2024 (syslog-ng), uid 0: exited on signal 6 (core dumped)
- NLM: failed to contact remote rpcbind, stat = 5, port = 28416
- Can't start NLM - unable to contact NSM
- Dec 23 02:25:51 freenas kernel: NLM: failed to contact remote rpcbind, stat = 5, port = 28416
- Dec 23 02:25:51 freenas kernel: NLM: failed to contact remote rpcbind, stat = 5, port = 28416
- Dec 23 02:25:51 freenas kernel: Can't start NLM - unable to contact NSM
- Dec 23 02:25:51 freenas kernel: Can't start NLM - unable to contact NSM
- bge0: link state changed to DOWN
- bge1: link state changed to DOWN
- mlxen0: link state changed to UP
- mlx4_en: mlxen0: Link Down
- mlxen0: link state changed to DOWN
- mlx4_en: mlxen0: Link Up
- mlxen0: link state changed to UP
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement