API tools faq
paste
tuxmartin

openwwrt dfs

tuxmartin
Oct 30th, 2015
140
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.77 KB | None | 0 0
raw download clone embed print report
  1. root@AP66:~# cat /etc/config/wireless
  2.  
  3. config wifi-device 'radio0'
  4. option type 'mac80211'
  5. option hwmode '11a'
  6. option path 'pci0000:00/0000:00:11.0'
  7. option txpower '1'
  8. option channel '100'
  9. option country 'CZ'
  10.  
  11. config wifi-iface
  12. option device 'radio0'
  13. option mode 'ap'
  14. option ssid 'AP'
  15. option encryption 'psk2'
  16. option key '123456789abc'
  17. option network 'wifi'
  18.  
  19. root@AP66:~# iw reg get
  20. country CZ: DFS-ETSI
  21. (2400 - 2483 @ 40), (N/A, 20), (N/A)
  22. (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR
  23. (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS
  24. (5470 - 5725 @ 160), (N/A, 27), (0 ms), DFS
  25. (57000 - 66000 @ 2160), (N/A, 40), (N/A)
  26.  
  27. root@AP66:~# iw phy0 info
  28. Wiphy phy0
  29. max # scan SSIDs: 4
  30. max scan IEs length: 2285 bytes
  31. Retry short limit: 7
  32. Retry long limit: 4
  33. Coverage class: 0 (up to 0m)
  34. Available Antennas: TX 0x3 RX 0x3
  35. Configured Antennas: TX 0x3 RX 0x3
  36. Supported interface modes:
  37. * IBSS
  38. * managed
  39. * AP
  40. * AP/VLAN
  41. * monitor
  42. * mesh point
  43. Band 1:
  44. Frequencies:
  45. * 2412 MHz [1] (20.0 dBm)
  46. * 2417 MHz [2] (20.0 dBm)
  47. * 2422 MHz [3] (20.0 dBm)
  48. * 2427 MHz [4] (20.0 dBm)
  49. * 2432 MHz [5] (20.0 dBm)
  50. * 2437 MHz [6] (20.0 dBm)
  51. * 2442 MHz [7] (20.0 dBm)
  52. * 2447 MHz [8] (20.0 dBm)
  53. * 2452 MHz [9] (20.0 dBm)
  54. * 2457 MHz [10] (20.0 dBm)
  55. * 2462 MHz [11] (20.0 dBm)
  56. * 2467 MHz [12] (20.0 dBm)
  57. * 2472 MHz [13] (20.0 dBm)
  58. * 2484 MHz [14] (disabled)
  59. Band 2:
  60. Frequencies:
  61. * 5040 MHz [8] (disabled)
  62. * 5060 MHz [12] (disabled)
  63. * 5080 MHz [16] (disabled)
  64. * 5180 MHz [36] (23.0 dBm)
  65. * 5200 MHz [40] (23.0 dBm)
  66. * 5220 MHz [44] (23.0 dBm)
  67. * 5240 MHz [48] (23.0 dBm)
  68. * 5260 MHz [52] (20.0 dBm) (radar detection)
  69. DFS state: usable (for 114 sec)
  70. DFS CAC time: 60000 ms
  71. * 5280 MHz [56] (20.0 dBm) (radar detection)
  72. DFS state: usable (for 114 sec)
  73. DFS CAC time: 60000 ms
  74. * 5300 MHz [60] (20.0 dBm) (radar detection)
  75. DFS state: usable (for 114 sec)
  76. DFS CAC time: 60000 ms
  77. * 5320 MHz [64] (20.0 dBm) (radar detection)
  78. DFS state: usable (for 114 sec)
  79. DFS CAC time: 60000 ms
  80. * 5500 MHz [100] (27.0 dBm) (radar detection)
  81. DFS state: usable (for 114 sec)
  82. DFS CAC time: 60000 ms
  83. * 5520 MHz [104] (27.0 dBm) (radar detection)
  84. DFS state: usable (for 114 sec)
  85. DFS CAC time: 60000 ms
  86. * 5540 MHz [108] (27.0 dBm) (radar detection)
  87. DFS state: usable (for 114 sec)
  88. DFS CAC time: 60000 ms
  89. * 5560 MHz [112] (27.0 dBm) (radar detection)
  90. DFS state: usable (for 114 sec)
  91. DFS CAC time: 60000 ms
  92. * 5580 MHz [116] (27.0 dBm) (radar detection)
  93. DFS state: usable (for 114 sec)
  94. DFS CAC time: 60000 ms
  95. * 5600 MHz [120] (27.0 dBm) (radar detection)
  96. DFS state: usable (for 114 sec)
  97. DFS CAC time: 60000 ms
  98. * 5620 MHz [124] (27.0 dBm) (radar detection)
  99. DFS state: usable (for 114 sec)
  100. DFS CAC time: 60000 ms
  101. * 5640 MHz [128] (27.0 dBm) (radar detection)
  102. DFS state: usable (for 114 sec)
  103. DFS CAC time: 60000 ms
  104. * 5660 MHz [132] (27.0 dBm) (radar detection)
  105. DFS state: usable (for 114 sec)
  106. DFS CAC time: 60000 ms
  107. * 5680 MHz [136] (27.0 dBm) (radar detection)
  108. DFS state: usable (for 114 sec)
  109. DFS CAC time: 60000 ms
  110. * 5700 MHz [140] (27.0 dBm) (radar detection)
  111. DFS state: usable (for 114 sec)
  112. DFS CAC time: 60000 ms
  113. * 5745 MHz [149] (disabled)
  114. * 5765 MHz [153] (disabled)
  115. * 5785 MHz [157] (disabled)
  116. * 5805 MHz [161] (disabled)
  117. * 5825 MHz [165] (disabled)
  118. valid interface combinations:
  119. * #{ managed } <= 2048, #{ AP, mesh point } <= 4, #{ IBSS } <= 1,
  120. total <= 2048, #channels <= 1
  121. HT Capability overrides:
  122. * MCS: ff ff ff ff ff ff ff ff ff ff
  123. * maximum A-MSDU length
  124. * supported channel width
  125. * short GI for 40 MHz
  126. * max A-MPDU length exponent
  127. * min MPDU start spacing
  128.  
  129.  
  130. root@AP66:~# dmesg
  131. [ 0.000000] Linux version 3.18.21 (root@debian) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47046) ) #1 Sat Sep 26 01:25:49 CEST 2015
  132. [ 0.000000] MyLoader: sysp=00000000, boardp=00000000, parts=ace50014
  133. [ 0.000000] bootconsole [early0] enabled
  134. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  135. [ 0.000000] SoC: Atheros AR7161 rev 2
  136. [ 0.000000] Determined physical RAM map:
  137. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  138. [ 0.000000] Initrd not found or empty - disabling initrd
  139. [ 0.000000] Zone ranges:
  140. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  141. [ 0.000000] Movable zone start for each node
  142. [ 0.000000] Early memory node ranges
  143. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  144. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
  145. [ 0.000000] On node 0 totalpages: 16384
  146. [ 0.000000] free_area_init_node: node 0, pgdat 803580f0, node_mem_map 81000000
  147. [ 0.000000] Normal zone: 128 pages used for memmap
  148. [ 0.000000] Normal zone: 0 pages reserved
  149. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  150. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  151. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  152. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  153. [ 0.000000] pcpu-alloc: [0] 0
  154. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  155. [ 0.000000] Kernel command line: board=UBNT-RS console=ttyS0,115200 ethaddr=00.15.6d.c3.7f.c1 rootfstype=squashfs,jffs2 noinitrd
  156. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  157. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  158. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  159. [ 0.000000] Writing ErrCtl register=0007ebf2
  160. [ 0.000000] Readback ErrCtl register=0007ebf2
  161. [ 0.000000] Memory: 60944K/65536K available (2478K kernel code, 125K rwdata, 528K rodata, 252K init, 188K bss, 4592K reserved)
  162. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  163. [ 0.000000] NR_IRQS:51
  164. [ 0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
  165. [ 0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
  166. [ 0.060000] pid_max: default: 32768 minimum: 301
  167. [ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  168. [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  169. [ 0.080000] NET: Registered protocol family 16
  170. [ 0.080000] MIPS: machine is Ubiquiti RouterStation
  171. [ 0.380000] registering PCI controller with io_map_base unset
  172. [ 2.720000] PCI host bridge to bus 0000:00
  173. [ 2.730000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff]
  174. [ 2.730000] pci_bus 0000:00: root bus resource [io 0x0000]
  175. [ 2.740000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  176. [ 2.740000] pci 0000:00:11.0: [168c:0013] type 00 class 0x020000
  177. [ 2.740000] pci 0000:00:11.0: reg 0x10: [mem 0x00000000-0x0000ffff]
  178. [ 2.740000] pci 0000:00:12.0: [168c:0013] type 00 class 0x020000
  179. [ 2.740000] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x0000ffff]
  180. [ 2.740000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  181. [ 2.740000] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
  182. [ 2.750000] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
  183. [ 2.750000] pci 0000:00:11.0: using irq 40 for pin 1
  184. [ 2.760000] pci 0000:00:12.0: using irq 41 for pin 1
  185. [ 2.760000] Switched to clocksource MIPS
  186. [ 2.770000] NET: Registered protocol family 2
  187. [ 2.770000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  188. [ 2.770000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  189. [ 2.780000] TCP: Hash tables configured (established 1024 bind 1024)
  190. [ 2.780000] TCP: reno registered
  191. [ 2.790000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  192. [ 2.790000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  193. [ 2.800000] NET: Registered protocol family 1
  194. [ 2.800000] PCI: CLS 0 bytes, default 32
  195. [ 2.810000] futex hash table entries: 256 (order: -1, 3072 bytes)
  196. [ 2.820000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  197. [ 2.820000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  198. [ 2.830000] msgmni has been set to 119
  199. [ 2.850000] io scheduler noop registered
  200. [ 2.860000] io scheduler deadline registered (default)
  201. [ 2.860000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  202. [ 2.870000] console [ttyS0] disabled
  203. [ 2.890000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 10625000) is a 16550A
  204. [ 2.900000] console [ttyS0] enabled
  205. [ 2.910000] bootconsole [early0] disabled
  206. [ 2.920000] m25p80 spi0.0: found mx25l12805d, expected m25p80
  207. [ 2.920000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
  208. [ 2.930000] Searching for RedBoot partition table in spi0.0 at offset 0xfe0000
  209. [ 2.960000] Searching for RedBoot partition table in spi0.0 at offset 0xff0000
  210. [ 2.990000] 5 RedBoot partitions found on MTD device spi0.0
  211. [ 3.000000] Creating 5 MTD partitions on "spi0.0":
  212. [ 3.000000] 0x000000000000-0x000000030000 : "RedBoot"
  213. [ 3.010000] 0x000000030000-0x000000150000 : "kernel"
  214. [ 3.010000] 0x000000150000-0x000000ff0000 : "rootfs"
  215. [ 3.020000] mtd: device 2 (rootfs) set to be root filesystem
  216. [ 3.020000] 1 squashfs-split partitions found on MTD device rootfs
  217. [ 3.030000] 0x0000004d0000-0x000000ff0000 : "rootfs_data"
  218. [ 3.040000] 0x000000ff0000-0x000000fff000 : "FIS directory"
  219. [ 3.040000] 0x000000fff000-0x000001000000 : "RedBoot config"
  220. [ 3.060000] libphy: ag71xx_mdio: probed
  221. [ 3.390000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:14 [uid=03026071, driver=Generic PHY]
  222. [ 3.400000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  223. [ 3.720000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RMII
  224. [ 3.720000] TCP: cubic registered
  225. [ 3.730000] NET: Registered protocol family 17
  226. [ 3.730000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  227. [ 3.740000] 8021q: 802.1Q VLAN Support v1.8
  228. [ 3.760000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  229. [ 3.760000] Freeing unused kernel memory: 252K (80371000 - 803b0000)
  230. [ 4.740000] init: Console is alive
  231. [ 4.740000] init: - watchdog -
  232. [ 6.000000] usbcore: registered new interface driver usbfs
  233. [ 6.000000] usbcore: registered new interface driver hub
  234. [ 6.010000] usbcore: registered new device driver usb
  235. [ 6.020000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  236. [ 6.030000] ehci-platform: EHCI generic platform driver
  237. [ 6.030000] ehci-platform ehci-platform: EHCI Host Controller
  238. [ 6.040000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  239. [ 6.050000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  240. [ 6.070000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  241. [ 6.070000] hub 1-0:1.0: USB hub found
  242. [ 6.080000] hub 1-0:1.0: 2 ports detected
  243. [ 6.080000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  244. [ 6.090000] ohci-platform: OHCI generic platform driver
  245. [ 6.100000] ohci-platform ohci-platform: Generic Platform OHCI controller
  246. [ 6.100000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
  247. [ 6.110000] ohci-platform ohci-platform: irq 14, io mem 0x1c000000
  248. [ 6.180000] hub 2-0:1.0: USB hub found
  249. [ 6.180000] hub 2-0:1.0: 2 ports detected
  250. [ 6.760000] init: - preinit -
  251. [ 7.150000] ar71xx: pll_reg 0xb8050014: 0x1099
  252. [ 7.150000] eth1: link up (100Mbps/Full duplex)
  253. [ 7.170000] random: procd urandom read with 11 bits of entropy available
  254. [ 10.400000] jffs2: notice: (330) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  255. [ 10.420000] mount_root: switching to jffs2 overlay
  256. [ 10.470000] eth1: link down
  257. [ 10.490000] procd: - early -
  258. [ 10.490000] procd: - watchdog -
  259. [ 11.110000] procd: - ubus -
  260. [ 12.120000] procd: - init -
  261. [ 12.950000] NET: Registered protocol family 10
  262. [ 12.960000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  263. [ 12.980000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
  264. [ 12.990000] Backport generated by backports.git backports-20150129-0-gdd4a670
  265. [ 13.000000] ip_tables: (C) 2000-2006 Netfilter Core Team
  266. [ 13.020000] nf_conntrack version 0.5.0 (956 buckets, 3824 max)
  267. [ 13.050000] xt_time: kernel timezone is -0000
  268. [ 13.080000] cfg80211: Calling CRDA to update world regulatory domain
  269. [ 13.110000] cfg80211: World regulatory domain updated:
  270. [ 13.110000] cfg80211: DFS Master region: unset
  271. [ 13.120000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  272. [ 13.130000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  273. [ 13.140000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  274. [ 13.140000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  275. [ 13.150000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  276. [ 13.160000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  277. [ 13.170000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  278. [ 13.180000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  279. [ 13.190000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  280. [ 13.240000] PPP generic driver version 2.4.2
  281. [ 13.240000] NET: Registered protocol family 24
  282. [ 13.260000] PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
  283. [ 13.270000] ath5k 0000:00:11.0: registered as 'phy0'
  284. [ 13.460000] random: nonblocking pool is initialized
  285. [ 13.900000] ath: EEPROM regdomain: 0x0
  286. [ 13.900000] ath: EEPROM indicates default country code should be used
  287. [ 13.900000] ath: doing EEPROM country->regdmn map search
  288. [ 13.900000] ath: country maps to regdmn code: 0x3a
  289. [ 13.900000] ath: Country alpha2 being used: US
  290. [ 13.900000] ath: Regpair used: 0x3a
  291. [ 13.900000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  292. [ 13.910000] ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
  293. [ 13.910000] PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
  294. [ 13.920000] ath5k 0000:00:12.0: registered as 'phy1'
  295. [ 13.920000] cfg80211: Calling CRDA for country: US
  296. [ 13.930000] cfg80211: Regulatory domain changed to country: US
  297. [ 13.940000] cfg80211: DFS Master region: FCC
  298. [ 13.940000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  299. [ 13.950000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  300. [ 13.960000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
  301. [ 13.970000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  302. [ 13.980000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  303. [ 13.980000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  304. [ 14.680000] ath: EEPROM regdomain: 0x0
  305. [ 14.680000] ath: EEPROM indicates default country code should be used
  306. [ 14.680000] ath: doing EEPROM country->regdmn map search
  307. [ 14.680000] ath: country maps to regdmn code: 0x3a
  308. [ 14.680000] ath: Country alpha2 being used: US
  309. [ 14.680000] ath: Regpair used: 0x3a
  310. [ 14.680000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  311. [ 14.690000] ath5k: phy1: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
  312. [ 14.730000] Broadcom 43xx driver loaded [ Features: PNL ]
  313. [ 22.280000] ar71xx: pll_reg 0xb8050014: 0x1099
  314. [ 22.280000] eth1: link up (100Mbps/Full duplex)
  315. [ 22.290000] device eth1 entered promiscuous mode
  316. [ 22.290000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  317. [ 22.370000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  318. [ 22.420000] IPv6: ADDRCONF(NETDEV_UP): br-wifi: link is not ready
  319. [ 23.360000] br-lan: port 1(eth1) entered listening state
  320. [ 23.360000] br-lan: port 1(eth1) entered listening state
  321. [ 23.370000] cfg80211: Calling CRDA for country: CZ
  322. [ 23.420000] cfg80211: Regulatory domain changed to country: CZ
  323. [ 23.420000] cfg80211: DFS Master region: ETSI
  324. [ 23.430000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  325. [ 23.440000] cfg80211: (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  326. [ 23.440000] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2300 mBm), (N/A)
  327. [ 23.450000] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  328. [ 23.460000] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
  329. [ 23.470000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  330. [ 23.790000] ar71xx: pll_reg 0xb8050010: 0x1099
  331. [ 23.790000] eth0: link up (100Mbps/Full duplex)
  332. [ 24.910000] device wlan1 entered promiscuous mode
  333. [ 24.990000] device wlan0 entered promiscuous mode
  334. [ 25.000000] br-wifi: port 2(wlan0) entered forwarding state
  335. [ 25.000000] br-wifi: port 2(wlan0) entered forwarding state
  336. [ 25.030000] device wlan0 left promiscuous mode
  337. [ 25.030000] br-wifi: port 2(wlan0) entered disabled state
  338. [ 25.360000] br-lan: port 1(eth1) entered learning state
  339. [ 26.000000] br-wifi: port 1(wlan1) entered forwarding state
  340. [ 26.000000] br-wifi: port 1(wlan1) entered forwarding state
  341. [ 27.360000] br-lan: topology change detected, propagating
  342. [ 27.360000] br-lan: port 1(eth1) entered forwarding state
  343. [ 28.000000] br-wifi: port 1(wlan1) entered forwarding state
  344. root@AP66:~#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!