Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Waiting for mtk usb device... ok
- BootMode : Preloader[COM17]
- DriverDesc : MediaTek PreLoader USB VCOM_V1632 (Android)
- DriverPath : usb\vid_0e8d&pid_2000\5&1f44e00&0&1
- DriverSRV : wdm_usb
- DriverVersion : 3.0.1504.0
- DriverDate : 1-22-2015
- DriverCFG : oem104.inf
- DriverOEM : MediaTek Inc.
- Start handshake with Preloader...
- PreloaderCmd::CMD_BootAsMETA(): Receive READY succeed!
- Send BootMode Switch Request...
- reboot to meta mode success!
- Wait for meta mode usb device...
- Init meta mode api...
- Connect to SP_META mode...
- connect to meta mode success!
- Reading device information...
- RNID 4d55b27e14dfb1003a9b06586228385100000000
- Bluetooth 18:4E:CB:00:BD:9A
- WIFIMac 18:4E:CB:00:BD:9B
- Chip ID MT6765
- SW Ver 5626AA_2F057_220805
- ● Manufacturer alps
- ● Brand alps
- ● Model hs03s
- ● DevName hs03s
- ● Name vnd_hs03s
- ● Board hs03s
- ● Build ID 5626AA_2F057_220805
- ● Android Ver 11 (Red Velvet Cake)
- ● EMI ID sys_mssi_hs03s-userdebug
- ● Sec Patch 2022-08-01
- ● UsbConf mtp
- ● Branch ID alps-mp-r0.mssi1.tc10sp
- ● Build Type userdebug
- ● SerialNo ROWKBY7TYPPFGAP7
- ● Hardware mt6765
- ● Device State locked
- ● VerifiedBootState green
- ● Flash_locked 1
- ● Selinux permissive
- ● Veritymode disabled
- ● CryptState encrypted
- ● CryptType File Based Encryption (FBE) is present.
- ● SDKVer 30
- ● FRP Pst /dev/block/platform/bootdevice/by-name/frp
- Reading emmc info...
- ● CID 150100515836334d42033093be96c701
- ● Name mtk-msdc
- ● Size 61071360
- ● Type 0
- ● ManfID 0x000015
- ● FWVer 0x0300000000000000
- ● PRD QX63MB
- ● pre_eol_info 0x01
- ● life_time_est_typ_a 0x01
- ● life_time_est_typ_a 0x01
- =======================================
- Extended CSD rev 1.8 (MMC 5.1)
- =======================================
- Card Supported Command sets [S_CMD_SET: 0x01]
- Card Supported Command sets [S_CMD_SET: 0x01]
- HPI Features [HPI_FEATURE: 0x01]:
- implementation based on CMD13
- Background operations support [BKOPS_SUPPORT: 0x01]
- Max Packet Read Cmd [MAX_PACKED_READS: 0x3f]
- Max Packet Write Cmd [MAX_PACKED_WRITES: 0x3f]
- Data TAG support [DATA_TAG_SUPPORT: 0x01]
- Data TAG Unit Size [TAG_UNIT_SIZE: 0x03]
- Tag Resources Size [TAG_RES_SIZE: 0x00]
- Context Management Capabilities [CONTEXT_CAPABILITIES: 0x05]
- Large Unit Size [LARGE_UNIT_SIZE_M1: 0x07]
- Extended partition attribute support [EXT_SUPPORT: 0x03]
- Supported modes [SUPPORTED_MODES: 0x03]
- FFU features [FFU_FEATURES: 0x00]
- Operation codes timeout [OPERATION_CODE_TIMEOUT: 0x00]
- FFU Argument [FFU_ARG: 0xc7810000]
- Vendor proprietary health report:
- [VENDOR_PROPRIETARY_HEALTH_REPORT[270]]: 0x00
- Device life time estimation type B [DEVICE_LIFE_TIME_EST_TYP_B: 0x01]
- Device life time estimation type A [DEVICE_LIFE_TIME_EST_TYP_A: 0x01]
- i.e. 0% - 10% device life time used
- Optimal read size [OPTIMAL_READ_SIZE: 0x00]
- Optimal write size [OPTIMAL_WRITE_SIZE: 0x10]
- Optimal trim unit size [OPTIMAL_TRIM_UNIT_SIZE: 0x01]
- Device version [DEVICE_VERSION: 0x00 - 0x00]
- Firmware version:
- [FIRMWARE_VERSION[254]]: 0x03
- Power class for 200MHz, DDR at VCC= 3.6V [PWR_CL_DDR_200_360: 0x00]
- Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x0a]
- Power off notification [POWER_OFF_LONG_TIME: 0x3c]
- Cache Size [CACHE_SIZE] is 65536 KiB
- Background operations status [BKOPS_STATUS: 0x00]
- 1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x1e]
- Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00]
- Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00]
- Power class for 200MHz at 3.6V [PWR_CL_200_360: 0x00]
- Power class for 200MHz, at 1.95V [PWR_CL_200_195: 0x00]
- Minimum Performance for 8bit at 52MHz in DDR mode:
- [MIN_PERF_DDR_W_8_52: 0x4b]
- [MIN_PERF_DDR_R_8_52: 0x00]
- TRIM Multiplier [TRIM_MULT: 0x02]
- Secure Feature support [SEC_FEATURE_SUPPORT: 0x55]
- Boot Information [BOOT_INFO: 0x07]
- Device supports alternative boot method
- Device supports dual data rate during boot
- Device supports high speed timing during boot
- Boot partition size [BOOT_SIZE_MULTI: 0x20]
- Access size [ACC_SIZE: 0x07]
- High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01]
- High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01]
- Reliable write sector count [REL_WR_SEC_C: 0x01]
- High-capacity W protect group size [HC_WP_GRP_SIZE: 0x10]
- i.e. 8192 KiB
- Sleep current (VCC) [S_C_VCC: 0x07]
- Sleep current (VCCQ) [S_C_VCCQ: 0x07]
- Sleep/awake timeout [S_A_TIMEOUT: 0x11]
- Sector Count [SEC_COUNT: 0x03a3e000]
- Device is block-addressed
- [MIN_PERF_W_8_52: 0x4c]
- [MIN_PERF_R_8_52: 0x00]
- [MIN_PERF_W_8_26_4_52: 0x47]
- [MIN_PERF_R_8_26_4_52: 0x00]
- [MIN_PERF_W_4_26: 0x2b]
- [MIN_PERF_R_4_26: 0x00]
- [PWR_CL_26_360: 0x00]
- [PWR_CL_52_360: 0x00]
- [PWR_CL_26_195: 0x00]
- [PWR_CL_52_195: 0x00]
- Card Type [CARD_TYPE: 0x57 - 00]
- Card Type [CARD_TYPE: 0x57 - 00]
- Card Type [CARD_TYPE: 0x57 - 00]
- Card Type [CARD_TYPE: 0x57 - 00]
- HS400 Dual Data Rate eMMC @200MHz 1.8VI/O
- HS400 Dual Data Rate eMMC @200MHz 1.8VI/O
- HS200 Single Data Rate eMMC @200MHz 1.8VI/O
- HS200 Single Data Rate eMMC @200MHz 1.8VI/O
- HS Dual Data Rate eMMC @52MHz 1.8V or 3VI/O
- HS eMMC @52MHz - at rated device voltage(s)
- HS eMMC @26MHz - at rated device voltage(s)
- CSD structure version [CSD_STRUCTURE: 0x02]
- Command set [CMD_SET: 0x00]
- Command set revision [CMD_SET_REV: 0x00]
- Power class [POWER_CLASS: 0x00]
- High-speed interface timing [HS_TIMING: 0x03]
- Erased memory content [ERASED_MEM_CONT: 0x00]
- Boot configuration bytes [PARTITION_CONFIG: 0x48]
- Boot Partition 1 enabled
- No access to boot partition
- Boot config protection [BOOT_CONFIG_PROT: 0x00]
- Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x02]
- High-density erase group definition [ERASE_GROUP_DEF: 0x01]
- Boot write protection status registers [BOOT_WP_STATUS]: 0x00
- Boot Area Write protection [BOOT_WP]: 0x00
- Power ro locking:
- possible
- Permanent ro locking:
- possible
- ro lock status:
- not locked
- User area write protection register [USER_WP]: 0x00
- FW configuration [FW_CONFIG]: 0x00
- RPMB Size [RPMB_SIZE_MULT]: 0x20
- Write reliability setting register [WR_REL_SET]: 0x1f
- user area: the device protects existing data if a power failure occurs during a write operation
- partition 1: the device protects existing data if a power failure occurs during a write operation
- partition 2: the device protects existing data if a power failure occurs during a write operation
- partition 3: the device protects existing data if a power failure occurs during a write operation
- partition 4: the device protects existing data if a power failure occurs during a write operation
- Write reliability parameter register [WR_REL_PARAM]: 0x14
- Device supports the enhanced def. of reliable write
- Enable background operations handshake [BKOPS_EN]: 0x00
- H/W reset function [RST_N_FUNCTION]: 0x01
- HPI management [HPI_MGMT]: 0x01
- Device can have enhanced tech.
- Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x000747
- i.e. 15261696 KiB
- Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00
- Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
- Device partition setting NOT complete
- General Purpose Partition Size
- [GP_SIZE_MULT_4]: 0x000000
- [GP_SIZE_MULT_3]: 0x000000
- [GP_SIZE_MULT_2]: 0x000000
- [GP_SIZE_MULT_1]: 0x000000
- Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000
- Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000
- i.e. 0 bytes offset
- Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00
- Periodic Wake-up [PERIODIC_WAKEUP]: 0x00
- Program CID/CSD in DDR mode support [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x01
- Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[64]]: 0x2f
- Native sector size [NATIVE_SECTOR_SIZE]: 0x00
- i.e. 512 B
- 1st initialization after disabling sector size emulation [INI_TIMEOUT_EMU]: 0x00
- Class 6 commands control [CLASS_6_CTRL]: 0x00
- Number of addressed group to be Released[DYNCAP_NEEDED]: 0x00
- Exception events control [EXCEPTION_EVENTS_CTRL]: 0x0000
- Exception events status[EXCEPTION_EVENTS_STATUS]: 0x0000
- Extended Partitions Attribute [EXT_PARTITIONS_ATTRIBUTE]: 0x0000
- Context configuration [CONTEXT_CONF[37]]: 0x00
- Packed command status [PACKED_COMMAND_STATUS]: 0x00
- Packed command failure index [PACKED_FAILURE_INDEX]: 0x00
- Power Off Notification [POWER_OFF_NOTIFICATION]: 0x01
- Control to turn the Cache ON/OFF [CACHE_CTRL]: 0x01
- Mode config [MODE_CONFIG: 0x00]
- Mode operation codes [MODE_OPERATION_CODES: 0x00]
- FFU status [FFU_STATUS: 0x00]
- Success
- Pre loading data size [PRE_LOADING_DATA_SIZE] is 0 sector size
- Max pre loading data size [MAX_PRE_LOADING_DATA_SIZE] is 0 sector size
- Product state awareness enablement [PRODUCT_STATE_AWARENESS_ENABLEMENT: 0x00]
- Secure Removal Type [SECURE_REMOVAL_TYPE: 0x39]
- EXTCSD_BACKUP saved to C:/Users/MR.X/Documents/MTKMETAUtility/EXTCSD_BACKUP/2023_02_18_07_32_07_EXT_CSD.bin
- success
- Rebooting from meta mode...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement