Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 5.4.179 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16495-bf0c965af0)) #0 SMP Wed Feb 16 20:29:10 2022
- [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] MIPS: machine is TP-Link Archer A6 v3
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] VPE topology {2,2} total 4
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] On node 0 totalpages: 32768
- [ 0.000000] Normal zone: 288 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
- [ 0.000000] percpu: Embedded 14 pages/cpu s26768 r8192 d22384 u57344
- [ 0.000000] pcpu-alloc: s26768 r8192 d22384 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
- [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Writing ErrCtl register=00004450
- [ 0.000000] Readback ErrCtl register=00004450
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 120968K/131072K available (6095K kernel code, 204K rwdata, 748K rodata, 1260K init, 238K bss, 10104K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] random: get_random_bytes called from 0x806e5a3c with crng_init=0
- [ 0.000000] CPU Clock: 880MHz
- [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
- [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
- [ 0.007815] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
- [ 0.042009] pid_max: default: 32768 minimum: 301
- [ 0.046779] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.054005] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.064450] rcu: Hierarchical SRCU implementation.
- [ 0.069886] smp: Bringing up secondary CPUs ...
- [ 0.076020] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.076031] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.076043] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.076147] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.102642] Synchronize counters for CPU 1: done.
- [ 0.143596] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.143604] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.143611] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.143671] CPU2 revision is: 0001992f (MIPS 1004Kc)
- [ 0.167380] Synchronize counters for CPU 2: done.
- [ 0.198745] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.198752] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.198760] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.198824] CPU3 revision is: 0001992f (MIPS 1004Kc)
- [ 0.225236] Synchronize counters for CPU 3: done.
- [ 0.255117] smp: Brought up 1 node, 4 CPUs
- [ 0.263641] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.273340] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 0.280354] pinctrl core: initialized pinctrl subsystem
- [ 0.287208] NET: Registered protocol family 16
- [ 0.299065] FPU Affinity set after 4688 emulations
- [ 0.316833] clocksource: Switched to clocksource GIC
- [ 0.323403] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.323891] NET: Registered protocol family 2
- [ 0.334411] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.342402] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.350754] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.358348] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
- [ 0.365339] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.371783] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.378269] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.385434] NET: Registered protocol family 1
- [ 0.389765] PCI: CLS 0 bytes, default 32
- [ 0.484808] 4 CPUs re-calibrate udelay(lpj = 1163264)
- [ 0.491296] workingset: timestamp_bits=14 max_order=15 bucket_order=1
- [ 0.498880] random: fast init done
- [ 0.510830] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.516618] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.528067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.537437] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.543290] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.549342] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.555806] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.565916] printk: console [ttyS0] disabled
- [ 0.570202] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
- [ 0.579185] printk: console [ttyS0] enabled
- [ 0.587443] printk: bootconsole [early0] disabled
- [ 0.599864] spi-mt7621 1e000b00.spi: sys_freq: 220000000
- [ 0.615546] spi-nor spi0.0: w25q128 (16384 Kbytes)
- [ 0.620409] 4 fixed-partitions partitions found on MTD device spi0.0
- [ 0.626774] Creating 4 MTD partitions on "spi0.0":
- [ 0.631582] 0x000000000000-0x000000040000 : "u-boot"
- [ 0.638102] 0x000000040000-0x000000fa0000 : "firmware"
- [ 0.644698] 2 uimage-fw partitions found on MTD device firmware
- [ 0.650651] Creating 2 MTD partitions on "firmware":
- [ 0.655636] 0x000000000000-0x000000245429 : "kernel"
- [ 0.661877] 0x000000245429-0x000000f60000 : "rootfs"
- [ 0.668188] mtd: device 3 (rootfs) set to be root filesystem
- [ 0.673965] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.680151] 0x000000660000-0x000000f60000 : "rootfs_data"
- [ 0.686818] 0x000000fa0000-0x000000ff0000 : "config"
- [ 0.693337] 0x000000ff0000-0x000001000000 : "radio"
- [ 0.727394] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
- [ 0.737084] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
- [ 0.747451] mt7621-pci 1e140000.pcie: Parsing DT failed
- [ 0.755500] NET: Registered protocol family 10
- [ 0.761526] Segment Routing with IPv6
- [ 0.765330] NET: Registered protocol family 17
- [ 0.769895] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 0.783074] 8021q: 802.1Q VLAN Support v1.8
- [ 0.789455] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
- [ 0.809175] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
- [ 0.818829] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
- [ 0.828586] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
- [ 0.838379] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
- [ 0.848134] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
- [ 0.858013] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
- [ 0.869254] DSA: tree 0 setup
- [ 0.872524] rt2880-pinmux pinctrl: pcie is already enabled
- [ 0.878180] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
- [ 0.885788] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
- [ 0.993054] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
- [ 0.998636] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
- [ 1.103998] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
- [ 1.110957] mt7621-pci 1e140000.pcie: PCIE0 enabled
- [ 1.115835] mt7621-pci 1e140000.pcie: PCIE1 enabled
- [ 1.120716] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
- [ 1.130175] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
- [ 1.136539] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 1.143410] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 1.150283] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 1.155808] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
- [ 1.161844] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
- [ 1.168114] pci 0000:00:00.0: reg 0x14: [mem 0x60500000-0x6050ffff]
- [ 1.174447] pci 0000:00:00.0: supports D1
- [ 1.178463] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 1.184575] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
- [ 1.190621] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
- [ 1.196893] pci 0000:00:01.0: reg 0x14: [mem 0x60510000-0x6051ffff]
- [ 1.203218] pci 0000:00:01.0: supports D1
- [ 1.207229] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
- [ 1.214522] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
- [ 1.220590] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
- [ 1.227002] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 1.234484] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 1.239729] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
- [ 1.245822] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 1.252607] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 1.259826] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 1.266640] pci 0000:02:00.0: [14c3:7663] type 00 class 0x000280
- [ 1.272707] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
- [ 1.279937] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
- [ 1.287170] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
- [ 1.294503] pci 0000:02:00.0: supports D1 D2
- [ 1.298779] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 1.305422] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
- [ 1.320573] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
- [ 1.325819] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff]
- [ 1.331911] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
- [ 1.338695] pci 0000:00:01.0: bridge window [mem 0x60300000-0x604fffff pref]
- [ 1.345916] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
- [ 1.352573] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 1.359182] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 1.366141] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
- [ 1.372750] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 1.379707] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 1.386495] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
- [ 1.393715] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
- [ 1.400501] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x604fffff pref]
- [ 1.407717] pci 0000:00:00.0: BAR 1: assigned [mem 0x60500000-0x6050ffff]
- [ 1.414510] pci 0000:00:01.0: BAR 1: assigned [mem 0x60510000-0x6051ffff]
- [ 1.421299] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff]
- [ 1.428086] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff]
- [ 1.434877] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
- [ 1.441665] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.446643] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff]
- [ 1.453426] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 1.460211] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 1.467435] pci 0000:02:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff 64bit pref]
- [ 1.475187] pci 0000:02:00.0: BAR 2: assigned [mem 0x60400000-0x60403fff 64bit pref]
- [ 1.482938] pci 0000:02:00.0: BAR 4: assigned [mem 0x60404000-0x60404fff 64bit pref]
- [ 1.490685] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 1.495653] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff]
- [ 1.502436] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
- [ 1.509221] pci 0000:00:01.0: bridge window [mem 0x60300000-0x604fffff pref]
- [ 1.517081] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
- [ 1.517407] hctosys: unable to open rtc device (rtc0)
- [ 1.534339] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- [ 1.545901] Freeing unused kernel memory: 1260K
- [ 1.550451] This architecture does not have kernel memory protection.
- [ 1.556876] Run /sbin/init as init process
- [ 2.135499] init: Console is alive
- [ 2.139154] init: - watchdog -
- [ 2.833834] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 2.928620] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 2.945149] init: - preinit -
- [ 3.625687] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
- [ 3.633990] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 3.642495] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 3.765029] random: jshn: uninitialized urandom read (4 bytes read)
- [ 3.829887] random: jshn: uninitialized urandom read (4 bytes read)
- [ 3.877146] random: jshn: uninitialized urandom read (4 bytes read)
- [ 4.132202] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
- [ 4.139251] 8021q: adding VLAN 0 to HW filter on device lan1
- [ 7.205333] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 7.212857] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
- [ 8.308463] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
- [ 8.322992] urandom-seed: Seed file not found (/etc/urandom.seed)
- [ 8.402514] mt7530 mdio-bus:1f lan1: Link is Down
- [ 8.417360] procd: - early -
- [ 8.420328] procd: - watchdog -
- [ 9.012961] procd: - watchdog -
- [ 9.016744] procd: - ubus -
- [ 9.176453] procd: - init -
- [ 9.789305] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 9.807333] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
- [ 9.814946] Backport generated by backports.git v5.10.85-1-0-gf988973f
- [ 9.841016] xt_time: kernel timezone is -0000
- [ 9.903480] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23
- [ 9.908952] pci 0000:00:00.0: enabling device (0006 -> 0007)
- [ 9.914631] mt7603e 0000:01:00.0: enabling device (0000 -> 0002)
- [ 9.919034] urngd: v1.0.2 started.
- [ 9.924200] mt7603e 0000:01:00.0: ASIC revision: 76030010
- [ 10.061222] crng init done
- [ 10.063937] random: 7 urandom warning(s) missed due to ratelimiting
- [ 10.550124] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
- [ 10.555718] mt7603e 0000:01:00.0: Build Time: 20160107100755
- [ 10.584822] mt7603e 0000:01:00.0: firmware init done
- [ 10.767853] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 10.780693] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=24
- [ 10.786185] pci 0000:00:01.0: enabling device (0006 -> 0007)
- [ 10.791862] mt7615e 0000:02:00.0: enabling device (0000 -> 0002)
- [ 10.811688] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 10.835070] PPP generic driver version 2.4.2
- [ 10.841563] NET: Registered protocol family 24
- [ 10.862323] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 10.971683] mt7615e 0000:02:00.0: HW/SW Version: 0x65326363, Build Time: 2005101654debug
- [ 10.971683]
- [ 11.206030] mt7615e 0000:02:00.0: N9 Firmware Version: 7663mp1827, Build Time: 20200512032642
- [ 11.214633] mt7615e 0000:02:00.0: Region number: 0x4
- [ 11.219604] mt7615e 0000:02:00.0: Parsing tailer Region: 0
- [ 11.228268] mt7615e 0000:02:00.0: Region 0, override_addr = 0x00118000
- [ 11.234918] mt7615e 0000:02:00.0: Parsing tailer Region: 1
- [ 11.241551] mt7615e 0000:02:00.0: Parsing tailer Region: 2
- [ 11.247432] mt7615e 0000:02:00.0: Parsing tailer Region: 3
- [ 11.253394] mt7615e 0000:02:00.0: override_addr = 0x00118000, option = 3
- [ 27.025536] jffs2: notice: (2105) jffs2_build_xattr_subsystem: complete building xattr subsystem, 231 of xdatum (5 unchecked, 226 orphan) and 236 of xref (210 dead, 19 orphan) found.
- [ 27.169542] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
- [ 27.187800] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
- [ 27.196206] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 27.199617] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
- [ 27.212210] 8021q: adding VLAN 0 to HW filter on device lan1
- [ 27.220869] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 27.228032] br-lan: port 1(lan1) entered blocking state
- [ 27.233467] br-lan: port 1(lan1) entered disabled state
- [ 27.244387] device lan1 entered promiscuous mode
- [ 27.249399] device eth0 entered promiscuous mode
- [ 27.281373] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
- [ 27.289816] 8021q: adding VLAN 0 to HW filter on device lan2
- [ 27.299362] overlayfs: upper fs does not support tmpfile.
- [ 27.309755] br-lan: port 2(lan2) entered blocking state
- [ 27.315084] br-lan: port 2(lan2) entered disabled state
- [ 27.321607] device lan2 entered promiscuous mode
- [ 27.338061] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
- [ 27.346122] 8021q: adding VLAN 0 to HW filter on device lan3
- [ 27.355732] br-lan: port 3(lan3) entered blocking state
- [ 27.361103] br-lan: port 3(lan3) entered disabled state
- [ 27.369156] device lan3 entered promiscuous mode
- [ 27.392337] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
- [ 27.399710] 8021q: adding VLAN 0 to HW filter on device lan4
- [ 27.409402] br-lan: port 4(lan4) entered blocking state
- [ 27.414733] br-lan: port 4(lan4) entered disabled state
- [ 27.421612] device lan4 entered promiscuous mode
- [ 27.447219] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
- [ 27.454800] 8021q: adding VLAN 0 to HW filter on device wan
- [ 37.445327] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 37.452872] br-lan: port 1(lan1) entered blocking state
- [ 37.458109] br-lan: port 1(lan1) entered forwarding state
- [ 37.464356] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement