API tools faq
paste
Advertisement
Bullet64

r4s_1gb

Bullet64
Oct 23rd, 2021
139
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.64 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Willkommen zu minicom 2.8
  3.  
  4. Optionen: I18n
  5. Port /dev/ttyUSB0, 17:59:51
  6.  
  7. Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
  8.  
  9. root@OpenWrt:/# dmesg
  10. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  11. [ 0.000000] Linux version 5.4.150 (ao@zzz) (gcc version 9.3.0 (OpenWrt GCC 91
  12. [ 0.000000] Machine model: FriendlyElec NanoPi R4S
  13. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  14. [ 0.000000] printk: bootconsole [uart8250] enabled
  15. [ 0.000000] cma: Reserved 8 MiB at 0x000000003f800000
  16. [ 0.000000] On node 0 totalpages: 261632
  17. [ 0.000000] DMA32 zone: 4088 pages used for memmap
  18. [ 0.000000] DMA32 zone: 0 pages reserved
  19. [ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63
  20. [ 0.000000] psci: probing for conduit method from DT.
  21. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  22. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  23. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  24. [ 0.000000] psci: SMC Calling Convention v1.0
  25. [ 0.000000] percpu: Embedded 21 pages/cpu s47832 r8192 d29992 u86016
  26. [ 0.000000] pcpu-alloc: s47832 r8192 d29992 u86016 alloc=21*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  28. [ 0.000000] Detected VIPT I-cache on CPU0
  29. [ 0.000000] CPU features: detected: ARM erratum 845719
  30. [ 0.000000] CPU features: detected: GIC system register CPU interface
  31. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544
  32. [ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmit
  33. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  34. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, l)
  35. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  36. [ 0.000000] Memory: 1004104K/1046528K available (7806K kernel code, 598K rwd)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  38. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  39. [ 0.000000] rcu: RCU event tracing is enabled.
  40. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  41. [ 0.000000] Tasks RCU enabled.
  42. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
  43. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  44. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  45. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  46. [ 0.000000] GICv3: 256 SPIs implemented
  47. [ 0.000000] GICv3: 0 Extended SPIs implemented
  48. [ 0.000000] GICv3: Distributor has no Range Selector support
  49. [ 0.000000] GICv3: 16 PPIs implemented
  50. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  51. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  52. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  53. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @3dc80000 (flat,)
  54. [ 0.000000] ITS: using cache flushing for cmd queue
  55. [ 0.000000] GICv3: using LPI property table @0x000000003dc40000
  56. [ 0.000000] GIC: using cache flushing for LPI property table
  57. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000003dc5000
  58. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
  59. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
  60. [ 0.000000] random: get_random_bytes called from start_kernel+0x29c/0x398 wi0
  61. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  62. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  63. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  64. [ 0.001869] Console: colour dummy device 80x25
  65. [ 0.002333] Calibrating delay loop (skipped), value calculated using timer f)
  66. [ 0.003310] pid_max: default: 32768 minimum: 301
  67. [ 0.003950] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, lin)
  68. [ 0.004661] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  69. [ 0.007397] ASID allocator initialised with 32768 entries
  70. [ 0.008019] rcu: Hierarchical SRCU implementation.
  71. [ 0.008748] Platform MSI: interrupt-controller@fee20000 domain created
  72. [ 0.009715] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
  73. [ 0.011174] smp: Bringing up secondary CPUs ...
  74. [ 0.012181] Detected VIPT I-cache on CPU1
  75. [ 0.012217] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  76. [ 0.012233] GICv3: CPU1: using allocated LPI pending table @0x000000003dc6000
  77. [ 0.012279] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  78. [ 0.012932] Detected VIPT I-cache on CPU2
  79. [ 0.012959] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  80. [ 0.012973] GICv3: CPU2: using allocated LPI pending table @0x000000003dc7000
  81. [ 0.013004] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  82. [ 0.013634] Detected VIPT I-cache on CPU3
  83. [ 0.013660] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  84. [ 0.013674] GICv3: CPU3: using allocated LPI pending table @0x000000003dd0000
  85. [ 0.013703] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  86. [ 0.014341] CPU features: detected: EL2 vector hardening
  87. [ 0.014349] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  88. [ 0.014358] Detected PIPT I-cache on CPU4
  89. [ 0.014387] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  90. [ 0.014401] GICv3: CPU4: using allocated LPI pending table @0x000000003dd1000
  91. [ 0.014435] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  92. [ 0.015127] Detected PIPT I-cache on CPU5
  93. [ 0.015152] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  94. [ 0.015165] GICv3: CPU5: using allocated LPI pending table @0x000000003dd2000
  95. [ 0.015192] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  96. [ 0.015299] smp: Brought up 1 node, 6 CPUs
  97. [ 0.028423] SMP: Total of 6 processors activated.
  98. [ 0.028874] CPU features: detected: 32-bit EL0 Support
  99. [ 0.029364] CPU features: detected: CRC32 instructions
  100. [ 0.042390] CPU: All CPU(s) started at EL2
  101. [ 0.042821] alternatives: patching kernel code
  102. [ 0.057123] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  103. [ 0.058084] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  104. [ 0.059077] pinctrl core: initialized pinctrl subsystem
  105. [ 0.060222] NET: Registered protocol family 16
  106. [ 0.062934] DMA: preallocated 256 KiB pool for atomic allocations
  107. [ 0.064463] cpuidle: using governor menu
  108. [ 0.064954] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  109. [ 0.065833] Serial: AMBA PL011 UART driver
  110. [ 0.092309] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  111. [ 0.092970] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  112. [ 0.093625] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  113. [ 0.094279] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  114. [ 0.097453] cryptd: max_cpu_qlen set to 1000
  115. [ 0.100388] reg-fixed-voltage vcc3v3-sys: Failed to register regulator: -517
  116. [ 0.101172] reg-fixed-voltage vcc5v0-sys: Failed to register regulator: -517
  117. [ 0.101948] reg-fixed-voltage vcc1v8-s3: Failed to register regulator: -517
  118. [ 0.102801] reg-fixed-voltage vcc3v0-sd: Failed to register regulator: -517
  119. [ 0.104100] iommu: Default domain type: Translated
  120. [ 0.106520] SCSI subsystem initialized
  121. [ 0.107046] usbcore: registered new interface driver usbfs
  122. [ 0.107615] usbcore: registered new interface driver hub
  123. [ 0.108173] usbcore: registered new device driver usb
  124. [ 0.109040] workqueue: max_active 576 requested for napi_workq is out of ran2
  125. [ 0.110581] clocksource: Switched to clocksource arch_sys_counter
  126. [ 0.111292] VFS: Disk quotas dquot_6.6.0
  127. [ 0.111770] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  128. [ 0.115539] thermal_sys: Registered thermal governor 'step_wise'
  129. [ 0.115543] thermal_sys: Registered thermal governor 'power_allocator'
  130. [ 0.116601] NET: Registered protocol family 2
  131. [ 0.117799] IP idents hash table entries: 16384 (order: 5, 131072 bytes, lin)
  132. [ 0.119558] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192)
  133. [ 0.120396] TCP established hash table entries: 8192 (order: 4, 65536 bytes,)
  134. [ 0.121241] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linea)
  135. [ 0.122109] TCP: Hash tables configured (established 8192 bind 8192)
  136. [ 0.122879] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  137. [ 0.123560] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  138. [ 0.124406] NET: Registered protocol family 1
  139. [ 0.124853] PCI: CLS 0 bytes, default 64
  140. [ 0.126041] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  141. [ 0.127158] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
  142. [ 0.135464] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  143. [ 0.141920] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  144. [ 0.142492] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE.
  145. [ 0.168056] NET: Registered protocol family 38
  146. [ 0.168524] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
  147. [ 0.169383] io scheduler mq-deadline registered
  148. [ 0.176418] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  149. [ 0.178759] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
  150. [ 0.179503] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
  151. [ 0.181389] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
  152. [ 0.182132] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
  153. [ 0.184591] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  154. [ 0.186326] printk: console [ttyS2] disabled
  155. [ 0.186823] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud =A
  156. [ 0.187836] printk: console [ttyS2] enabled
  157. [ 0.188609] printk: bootconsole [uart8250] disabled
  158. [ 0.191418] random: fast init done
  159. [ 0.191549] cacheinfo: Unable to detect cache hierarchy for CPU 0
  160. [ 0.191999] random: crng init done
  161. [ 0.196817] loop: module loaded
  162. [ 0.197103] mtip32xx Version 1.3.1
  163. [ 0.199220] libphy: Fixed MDIO Bus: probed
  164. [ 0.200605] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  165. [ 0.201192] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  166. [ 0.201830] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  167. [ 0.202383] rk_gmac-dwmac fe300000.ethernet: phy regulator is not available g
  168. [ 0.215913] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  169. [ 0.216489] ehci-pci: EHCI PCI platform driver
  170. [ 0.216924] ehci-platform: EHCI generic platform driver
  171. [ 0.219563] ehci-platform fe380000.usb: EHCI Host Controller
  172. [ 0.220079] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
  173. [ 0.220855] ehci-platform fe380000.usb: irq 29, io mem 0xfe380000
  174. [ 0.234604] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  175. [ 0.235570] hub 1-0:1.0: USB hub found
  176. [ 0.235928] hub 1-0:1.0: 1 port detected
  177. [ 0.236660] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: Requested PHY isd
  178. [ 0.237351] ehci-platform fe3c0000.usb: EHCI Host Controller
  179. [ 0.237861] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
  180. [ 0.238652] ehci-platform fe3c0000.usb: irq 31, io mem 0xfe3c0000
  181. [ 0.254600] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  182. [ 0.255516] hub 2-0:1.0: USB hub found
  183. [ 0.255873] hub 2-0:1.0: 1 port detected
  184. [ 0.256673] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  185. [ 0.257234] ohci-platform: OHCI generic platform driver
  186. [ 0.257842] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  187. [ 0.258445] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
  188. [ 0.259248] ohci-platform fe3a0000.usb: irq 30, io mem 0xfe3a0000
  189. [ 0.322992] hub 3-0:1.0: USB hub found
  190. [ 0.323349] hub 3-0:1.0: 1 port detected
  191. [ 0.324067] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: Requested PHY isd
  192. [ 0.324759] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  193. [ 0.325358] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
  194. [ 0.326126] ohci-platform fe3e0000.usb: irq 32, io mem 0xfe3e0000
  195. [ 0.390982] hub 4-0:1.0: USB hub found
  196. [ 0.391339] hub 4-0:1.0: 1 port detected
  197. [ 0.392580] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  198. [ 0.393079] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
  199. [ 0.393884] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
  200. [ 0.394761] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
  201. [ 0.395433] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  202. [ 0.395925] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
  203. [ 0.396604] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  204. [ 0.397562] hub 5-0:1.0: USB hub found
  205. [ 0.397923] hub 5-0:1.0: 1 port detected
  206. [ 0.398555] usb usb6: We don't know the algorithms for LPM for this host, di.
  207. [ 0.399654] hub 6-0:1.0: USB hub found
  208. [ 0.400015] hub 6-0:1.0: 1 port detected
  209. [ 0.400722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  210. [ 0.401219] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
  211. [ 0.402011] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
  212. [ 0.402888] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
  213. [ 0.403574] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  214. [ 0.404066] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
  215. [ 0.404744] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  216. [ 0.405692] hub 7-0:1.0: USB hub found
  217. [ 0.406048] hub 7-0:1.0: 1 port detected
  218. [ 0.406700] usb usb8: We don't know the algorithms for LPM for this host, di.
  219. [ 0.407760] hub 8-0:1.0: USB hub found
  220. [ 0.408116] hub 8-0:1.0: 1 port detected
  221. [ 0.408869] usbcore: registered new interface driver usb-storage
  222. [ 0.409540] i2c /dev entries driver
  223. [ 0.411473] at24 2-0051: 256 byte 24c02 EEPROM, writable, 16 bytes/write
  224. [ 0.413450] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  225. [ 0.414747] fan53555-regulator 0-0040: Failed to register regulator!
  226. [ 0.415907] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  227. [ 0.417164] fan53555-regulator 0-0041: Failed to register regulator!
  228. [ 0.418245] rk808 0-001b: chip id: 0x0
  229. [ 0.422456] rk808-regulator rk808-regulator: there is no dvs0 gpio
  230. [ 0.423058] rk808-regulator rk808-regulator: there is no dvs1 gpio
  231. [ 0.424069] rk808 0-001b: failed to register 0 regulator
  232. [ 0.427650] rk808-rtc rk808-rtc: registered as rtc0
  233. [ 0.431885] sdhci: Secure Digital Host Controller Interface driver
  234. [ 0.432430] sdhci: Copyright(c) Pierre Ossman
  235. [ 0.432816] Synopsys Designware Multimedia Card Interface Driver
  236. [ 0.434023] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
  237. [ 0.434698] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  238. [ 0.435302] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  239. [ 0.435845] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bio
  240. [ 0.437018] sdhci-pltfm: SDHCI platform and OF driver helper
  241. [ 0.438899] ledtrig-cpu: registered to indicate activity on CPUs
  242. [ 0.439880] usbcore: registered new interface driver usbhid
  243. [ 0.440372] usbhid: USB HID core driver
  244. [ 0.442454] NET: Registered protocol family 10
  245. [ 0.443676] Segment Routing with IPv6
  246. [ 0.444068] NET: Registered protocol family 17
  247. [ 0.444496] bridge: filtering via arp/ip/ip6tables is no longer available by.
  248. [ 0.445626] 8021q: 802.1Q VLAN Support v1.8
  249. [ 0.477433] reg-fixed-voltage vcc3v3-sys: Failed to register regulator: -517
  250. [ 0.478318] vcc5v0_sys: supplied by vdd_5v
  251. [ 0.479023] reg-fixed-voltage vcc1v8-s3: Failed to register regulator: -517
  252. [ 0.479960] reg-fixed-voltage vcc3v0-sd: Failed to register regulator: -517
  253. [ 0.481142] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  254. [ 0.482591] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  255. [ 0.483179] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  256. [ 0.483828] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  257. [ 0.484377] rk_gmac-dwmac fe300000.ethernet: phy regulator is not available g
  258. [ 0.486632] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  259. [ 0.488673] fan53555-regulator 0-0040: Failed to register regulator!
  260. [ 0.490488] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  261. [ 0.492365] fan53555-regulator 0-0041: Failed to register regulator!
  262. [ 0.493153] rk808-regulator rk808-regulator: there is no dvs0 gpio
  263. [ 0.493718] rk808-regulator rk808-regulator: there is no dvs1 gpio
  264. [ 0.494327] rk808 0-001b: failed to register 0 regulator
  265. [ 0.496000] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
  266. [ 0.496656] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  267. [ 0.497258] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  268. [ 0.497788] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bio
  269. [ 0.498897] vcc3v3_sys: supplied by vcc5v0_sys
  270. [ 0.499610] reg-fixed-voltage vcc1v8-s3: Failed to register regulator: -517
  271. [ 0.500501] vcc3v0_sd: supplied by vcc3v3_sys
  272. [ 0.501465] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  273. [ 0.502083] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  274. [ 0.502688] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  275. [ 0.530888] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  276. [ 0.531533] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xf0
  277. [ 0.532216] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xf0
  278. [ 0.533191] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  279. [ 0.533777] pci_bus 0000:00: root bus resource [bus 00-1f]
  280. [ 0.534264] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  281. [ 0.534902] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
  282. [ 0.535770] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  283. [ 0.536419] pci 0000:00:00.0: supports D1
  284. [ 0.536778] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  285. [ 0.541520] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
  286. [ 0.542394] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
  287. [ 0.543043] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  288. [ 0.543664] pci 0000:01:00.0: reg 0x10: [io size 0x0100]
  289. [ 0.544217] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
  290. [ 0.544864] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
  291. [ 0.545509] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 )
  292. [ 0.546278] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
  293. [ 0.547245] pci 0000:01:00.0: supports D1 D2
  294. [ 0.547625] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  295. [ 0.562914] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  296. [ 0.563528] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
  297. [ 0.564135] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64b]
  298. [ 0.564819] pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64b]
  299. [ 0.565499] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100]
  300. [ 0.566053] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100]
  301. [ 0.566652] pci 0000:00:00.0: PCI bridge to [bus 01]
  302. [ 0.567097] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  303. [ 0.567869] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  304. [ 0.568682] pcieport 0000:00:00.0: PME: Signaling with IRQ 231
  305. [ 0.569933] pcieport 0000:00:00.0: AER: enabled with IRQ 231
  306. [ 0.571403] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  307. [ 0.571989] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  308. [ 0.572624] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  309. [ 0.573186] rk_gmac-dwmac fe300000.ethernet: phy regulator is not available g
  310. [ 0.575348] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  311. [ 0.577380] vdd_cpu_b: supplied by vcc3v3_sys
  312. [ 0.581959] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  313. [ 0.584294] vdd_gpu: supplied by vcc3v3_sys
  314. [ 0.587826] rk808-regulator rk808-regulator: there is no dvs0 gpio
  315. [ 0.588394] rk808-regulator rk808-regulator: there is no dvs1 gpio
  316. [ 0.589004] vdd_center: supplied by vcc3v3_sys
  317. [ 0.591343] vdd_cpu_l: supplied by vcc3v3_sys
  318. [ 0.592027] vcc_ddr: supplied by vcc3v3_sys
  319. [ 0.593471] vcc_1v8: supplied by vcc3v3_sys
  320. [ 0.595125] vcc1v8_cam: supplied by vcc3v3_sys
  321. [ 0.597674] vcc3v0_touch: supplied by vcc3v3_sys
  322. [ 0.600240] vcc1v8_pmupll: supplied by vcc3v3_sys
  323. [ 0.602779] vcc_sdio: supplied by vcc3v3_sys
  324. [ 0.604826] vcca3v0_codec: supplied by vcc3v3_sys
  325. [ 0.607403] vcc_1v5: supplied by vcc3v3_sys
  326. [ 0.609089] vcca1v8_codec: supplied by vcc3v3_sys
  327. [ 0.611506] vcc_3v0: supplied by vcc3v3_sys
  328. [ 0.612738] vcc3v3_s3: supplied by vcc3v3_sys
  329. [ 0.613324] vcc3v3_s0: supplied by vcc3v3_sys
  330. [ 0.615461] energy_model: pd0: hertz/watts ratio non-monotonically decreasin0
  331. [ 0.620098] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
  332. [ 0.620771] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  333. [ 0.621375] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  334. [ 0.621907] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bio
  335. [ 0.622992] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  336. [ 0.634783] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  337. [ 0.647424] vcc1v8_s3: supplied by vcc_1v8
  338. [ 0.648225] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  339. [ 0.648803] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  340. [ 0.649385] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  341. [ 0.649961] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  342. [ 0.650610] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  343. [ 0.651105] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
  344. [ 0.651601] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  345. [ 0.652162] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  346. [ 0.652768] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  347. [ 0.658304] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  348. [ 0.659348] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  349. [ 0.660001] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  350. [ 0.660459] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
  351. [ 0.661130] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
  352. [ 0.661782] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  353. [ 0.662239] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  354. [ 0.662889] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  355. [ 0.663459] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  356. [ 0.663976] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  357. [ 0.664486] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
  358. [ 0.722704] libphy: stmmac: probed
  359. [ 0.727303] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:09)
  360. [ 0.729043] ttyS2 - failed to request DMA
  361. [ 0.729446] Waiting for root device PARTUUID=5452574f-02...
  362. [ 0.863381] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000)
  363. [ 1.136671] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 203
  364. [ 1.137303] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  365. [ 1.139374] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  366. [ 1.144407] mmcblk0: p1 p2
  367. [ 1.164470] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
  368. [ 1.165954] Freeing unused kernel memory: 1728K
  369. [ 1.186849] Run /sbin/init as init process
  370. [ 1.375219] init: Console is alive
  371. [ 2.022977] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  372. [ 2.082389] Key type encrypted registered
  373. [ 2.085192] raid6: using algorithm neonx8 gen() 0 MB/s
  374. [ 2.085643] raid6: .... xor() 0 MB/s, rmw enabled
  375. [ 2.086055] raid6: using neon recovery algorithm
  376. [ 2.089058] xor: measuring software checksum speed
  377. [ 2.126742] 8regs : 7130.000 MB/sec
  378. [ 2.166660] 32regs : 8497.000 MB/sec
  379. [ 2.206659] arm64_neon: 7344.000 MB/sec
  380. [ 2.207024] xor: using function: 32regs (8497.000 MB/sec)
  381. [ 2.263815] Btrfs loaded, crc32c=crc32c-generic
  382. [ 2.266638] ehci-fsl: Freescale EHCI Host controller driver
  383. [ 2.270552] kmodloader: done loading kernel modules from /etc/modules-boot.d*
  384. [ 2.278344] init: - preinit -
  385. [ 6.761763] mount_root: rootdisk overlay filesystem has not been formatted yt
  386. [ 7.417577] F2FS-fs (loop0): Found nat_bits in checkpoint
  387. [ 7.439767] F2FS-fs (loop0): Mounted with checkpoint version = 676997e3
  388. [ 7.440897] mount_root: overlay filesystem has not been fully initialized yet
  389. [ 7.441800] mount_root: switching to f2fs overlay
  390. [ 7.604654] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: ()
  391. [ 7.644509] urandom-seed: Seed file not found (/etc/urandom.seed)
  392. [ 7.917595] procd: - early -
  393. [ 8.505933] procd: - ubus -
  394. [ 8.561520] procd: - init -
  395. [ 8.879446] urngd: v1.0.2 started.
  396. [ 9.083253] kmodloader: loading kernel modules from /etc/modules.d/*
  397. [ 9.150869] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-m
  398. [ 9.165143] Key type cifs.idmap registered
  399. [ 9.169958] NET: Registered protocol family 15
  400. [ 9.171679] Initializing XFRM netlink socket
  401. [ 9.184839] tun: Universal TUN/TAP device driver, 1.6
  402. [ 9.241296] cryptodev: driver 1.11 loaded.
  403. [ 9.243318] GACT probability on
  404. [ 9.244291] Mirror/redirect action on
  405. [ 9.248415] u32 classifier
  406. [ 9.248658] input device check on
  407. [ 9.248979] Actions configured
  408. [ 9.259214] Bridge firewalling registered
  409. [ 9.280457] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  410. [ 9.307797] usbcore: registered new interface driver r8152
  411. [ 9.311450] r8168 Gigabit Ethernet driver 8.049.01-NAPI loaded
  412. [ 9.312002] r8168 0000:01:00.0: enabling device (0000 -> 0002)
  413. [ 9.323960] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid0
  414. [ 9.324795] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Random a
  415. [ 9.325970] r8168: This product is covered by one or more of the following p.
  416. [ 9.329005] r8168 Copyright (C) 2021 Realtek NIC software team <nicfae@real
  417. [ 9.329005] This program comes with ABSOLUTELY NO WARRANTY; for details, pl
  418. [ 9.329005] This is free software, and you are welcome to redistribute it u
  419. [ 9.338282] rockchip-vop ff8f0000.vop: Adding to iommu group 1
  420. [ 9.339083] rockchip-vop ff900000.vop: Adding to iommu group 2
  421. [ 9.343079] usbcore: registered new interface driver snd-usb-caiaq
  422. [ 9.348129] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
  423. [ 9.373616] xt_time: kernel timezone is -0000
  424. [ 9.383686] PPP generic driver version 2.4.2
  425. [ 9.384967] NET: Registered protocol family 24
  426. [ 9.388929] usbcore: registered new interface driver snd-usb-audio
  427. [ 9.391599] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for inf.
  428. [ 9.392282] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2.
  429. [ 9.394942] kmodloader: done loading kernel modules from /etc/modules.d/*
  430. [ 16.161358] eth1: 0xffff80001105d000, 82:1f:12:f4:e4:0f, IRQ 232
  431. [ 16.320018] br-lan: port 1(eth1) entered blocking state
  432. [ 16.320780] br-lan: port 1(eth1) entered disabled state
  433. [ 16.321639] device eth1 entered promiscuous mode
  434. [ 16.328199] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver []
  435. [ 16.338625] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features supportd
  436. [ 16.339302] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  437. [ 16.339902] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii e
  438. [ 20.429719] r8168: eth1: link up
  439. [ 20.430143] br-lan: port 1(eth1) entered blocking state
  440. [ 20.430610] br-lan: port 1(eth1) entered forwarding state
  441. [ 20.431316] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  442. [ 25.070891] overlayfs: filesystem on '/opt/docker/check-overlayfs-support606r
  443. [ 25.090785] overlayfs: filesystem on '/opt/docker/check-overlayfs-support334r
  444. [ 31.710843] vbus_typec: disabling
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!