Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>Initializing cgroup subsys cpu
- <5>Linux version 3.0.8+ (unknown@unknown-virtual-machine) (gcc version 4.4.3 (GCC) ) #1104 PREEMPT Thu Oct 18 14:16:49 PDT 2012
- <4>CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
- <4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>Machine: encore
- <4>Ignoring unrecognised tag 0x54410008
- <6>Reserving 10485760 bytes SDRAM for VRAM
- <4>Memory policy: ECC disabled, Data cache writeback
- <6>OMAP3630 ES1.1 (l2cache iva sgx neon isp 192mhz_clk )
- <6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
- <7>On node 0 totalpages: 118528
- <7>free_area_init_node: node 0, pgdat c07aaa54, node_mem_map c093f000
- <7> Normal zone: 1024 pages used for memmap
- <7> Normal zone: 0 pages reserved
- <7> Normal zone: 117504 pages, LIFO batch:31
- <6>Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
- <6>Reprogramming SDRC clock to 332000000 Hz
- <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- <7>pcpu-alloc: [0] 0
- <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117504
- <5>Kernel command line: console=ttyO0,115200n8 rw init=/init videoout=omap24xxvout omap_vout_mod.video1_numbuffers=6 omap_vout_mod.vid1_static_vrfb_alloc=y omap_vout_mod.video2_numbuffers=6 omap_vout_mod.vid2_static_vrfb_alloc=y omapfb.vram=0:8M no_console_suspend backlighttype=1476AY
- <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>Memory: 462MB 1MB = 463MB total
- <5>Memory: 459896k/459896k available, 64392k reserved, 0K highmem
- <5>Virtual kernel memory layout:
- <5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5> DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- <5> vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
- <5> lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- <5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5> modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5> .init : 0xc0008000 - 0xc003c000 ( 208 kB)
- <5> .text : 0xc003c000 - 0xc0745ed0 (7208 kB)
- <5> .data : 0xc0746000 - 0xc07ac648 ( 410 kB)
- <5> .bss : 0xc07ac66c - 0xc093e620 (1608 kB)
- <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- <6>NR_IRQS:410
- <6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- <6>Total of 96 interrupts on 1 active controller
- <6>OMAP clockevent source: GPTIMER1 at 32768 Hz
- <6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>Console: colour dummy device 80x30
- <6>Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- <6>pid_max: default: 32768 minimum: 301
- <6>Mount-cache hash table entries: 512
- <6>Initializing cgroup subsys debug
- <6>Initializing cgroup subsys cpuacct
- <6>Initializing cgroup subsys freezer
- <6>Initializing cgroup subsys bfqio
- <6>CPU: Testing write buffer coherency: ok
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
- <4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
- <6>print_constraints: dummy:
- <6>NET: Registered protocol family 16
- <6>GPMC revision 5.0
- <6>OMAP GPIO hardware version 2.5
- <6>omap_mux_init: Add partition: #1: core, flags: 0
- <4>board-3621_evt1a.c: kxtf9_dev_init ...
- <4>board-3621_evt1a.c: kxtf9_dev_init > Init kxtf9 irq pin 113 !
- <4>board-3621_evt1a.c: max17042_dev_init ...
- <4>board-3621_evt1a.c: max17042_dev_init > Init max17042 irq pin 100 !
- <4>max17042 GPIO pin read 1
- <4>Enabling backlight PWM for LCD
- <6> wl127x_vio_leakage_fix
- <6>hw-breakpoint: debug architecture 0x4 unsupported.
- <6>OMAP DMA hardware revision 5.0
- <6>bio: create slab <bio-0> at 0
- <6>print_constraints: vdd_lcdtp: 3300 mV normal
- <6>print_constraints: vwl1271: 1800 mV
- <4>i2c-core: driver [twl] using legacy suspend method
- <4>i2c-core: driver [twl] using legacy resume method
- <5>SCSI subsystem initialized
- <6>usbcore: registered new interface driver usbfs
- <6>usbcore: registered new interface driver hub
- <6>usbcore: registered new device driver usb
- <6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
- <6>twl4030: PIH (irq 7) chaining IRQs 368..375
- <6>twl4030: power (irq 373) chaining IRQs 376..383
- <6>twl4030: gpio (irq 368) chaining IRQs 384..401
- <4>******IN boxer_twl_gpio_setup********
- <6>print_constraints: VMMC2: 1850 mV normal standby
- <6>print_constraints: VUSB1V5: 1500 mV normal standby
- <6>print_constraints: VUSB1V8: 1800 mV normal standby
- <6>print_constraints: VUSB3V1: 3100 mV normal standby
- <7>twl4030_usb twl4030_usb: USB_DTCT_CTRL=04
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0xf0/240; link 1
- <6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- <6>print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
- <6>print_constraints: VDAC: 1800 mV normal standby
- <6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
- <6>Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
- <6>Bluetooth: Core ver 2.16
- <6>NET: Registered protocol family 31
- <6>Bluetooth: HCI device and connection manager initialized
- <6>Bluetooth: HCI socket layer initialized
- <6>Bluetooth: L2CAP socket layer initialized
- <6>Bluetooth: SCO socket layer initialized
- <6>Switching to clocksource 32k_counter
- <6>Switched to NOHz mode on CPU #0
- <6>musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
- <7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>musb-hdrc: MHDRC RTL version 1.800
- <7>musb-hdrc: setup fifo_mode 4
- <7>musb-hdrc: 28/31 max ep, 16384/16384 memory
- <6>musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- <6>NET: Registered protocol family 2
- <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- <6>TCP: Hash tables configured (established 16384 bind 16384)
- <6>TCP reno registered
- <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
- <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- <6>NET: Registered protocol family 1
- <6>RPC: Registered named UNIX socket transport module.
- <6>RPC: Registered udp transport module.
- <6>RPC: Registered tcp transport module.
- <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>Trying to unpack rootfs image as initramfs...
- <6>Freeing initrd memory: 204K
- <6>omap_dsp_init: 600000 bytes @ 9ce00000
- <4>Enabling VAUX for wifi
- <6>omap-iommu omap-iommu.0: isp registered
- <6>ashmem: initialized
- <6>msgmni has been set to 898
- <6>io scheduler noop registered
- <6>io scheduler deadline registered
- <6>io scheduler cfq registered (default)
- <6>io scheduler bfq registered
- <6>OMAP DSS rev 2.0
- <4>Enabling power for LCD
- <4>spi_probe mode : 0, per_word 16, chip_select 0, speed 375000, master_bus 4,master_cs 1
- <6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- <6>console [ttyO0] enabled
- <6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- <6>omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
- <6>omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
- <6>omap_ion_probe: adding heap omap3_carveout of type 2 with 9df00000@1e00000
- <7>twl4030_usb twl4030_usb: twl4030_phy_suspend
- <6>brd: module loaded
- <6>loop: module loaded
- <6>(stk) :sysfs entries created
- <6>(stk) : debugfs entries created
- <6>PPP generic driver version 2.4.2
- <6>PPP Deflate Compression module registered
- <6>PPP BSD Compression module registered
- <6>PPP MPPE Compression module registered
- <6>NET: Registered protocol family 24
- <6>tun: Universal TUN/TAP device driver, 1.6
- <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>Initializing USB Mass Storage driver...
- <6>usbcore: registered new interface driver usb-storage
- <6>USB Mass Storage support registered.
- <6>usbcore: registered new interface driver usbserial
- <6>usbserial: USB Serial Driver core
- <7>twl4030_usb twl4030_usb: USB_DTCT_CTRL=04
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0xf0/240; link 1
- <7>twl4030_usb twl4030_usb: twl4030_phy_resume
- <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>android_usb gadget: Number of LUNs=2
- <6> lun0: LUN: removable file: (no medium)
- <6> lun1: LUN: removable file: (no medium)
- <4>max8903_charger_enable: dtct_status 0x04
- <6>android_usb gadget: android_usb ready
- <6>musb-hdrc musb-hdrc: MUSB HDRC host driver
- <7>drivers/usb/core/inode.c: creating file 'devices'
- <7>drivers/usb/core/inode.c: creating file '001'
- <6>musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
- <7>usb usb1: default language 0x0409
- <7>usb usb1: udev 1, busnum 1, minor = 0
- <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>usb usb1: Product: MUSB HDRC host driver
- <6>usb usb1: Manufacturer: Linux 3.0.8+ musb-hcd
- <6>usb usb1: SerialNumber: musb-hdrc
- <7>usb usb1: usb_probe_device
- <7>usb usb1: configuration #1 chosen from 1 choice
- <7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>hub 1-0:1.0: usb_probe_interface
- <7>hub 1-0:1.0: usb_probe_interface - got id
- <6>hub 1-0:1.0: USB hub found
- <6>hub 1-0:1.0: 1 port detected
- <7>hub 1-0:1.0: standalone hub
- <7>hub 1-0:1.0: individual port power switching
- <7>hub 1-0:1.0: no over-current protection
- <7>hub 1-0:1.0: Single TT
- <7>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
- <7>hub 1-0:1.0: power on to power good time: 10ms
- <7>hub 1-0:1.0: 100mA bus power budget for each child
- <7>hub 1-0:1.0: local power source is good
- <7>hub 1-0:1.0: enabling power on all ports
- <7>drivers/usb/core/inode.c: creating file '001'
- <6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
- <6>input: twl4030-keypad as /devices/platform/omap/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input1
- <6>cyttsp_init:Cypress TrueTouch(R) Standard Product
- <6>cyttsp_init:I2C Touchscreen Driver (Built Oct 17 2012 @ 13:40:29)
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <4>cyttsp:Reseting TMA340
- <4>cyttsp:Start Probe 1.2
- <4>
- <4>cyttsp::found BL, Overriding maxx & maxy
- <6>cyttsp_initialize:cyttsp-i2c: Register input device
- <6>input: cyttsp-i2c as /devices/platform/omap/omap_i2c.2/i2c-2/2-0022/input/input2
- <6>cyttsp_initialize:Setting up interrupt 259
- <6>cyttsp_initialize:cyttsp_initialize: Create sysfs_group successfully!
- <4>cyttsp:Start Probe PASS
- <6>ft5x06_init() - FT I2C Touchscreen Driver (Built Oct 17 2012 @ 13:40:30)
- <3>can't get ft5x06 xreset GPIO
- <6>cyttsp_power_on:BL101: f=00 s=11 err=D0 bl=010B bld=010B R=16
- <6>cyttsp_power_on:BL102: tver=1100 a_id=AA1D aver=0006
- <6>cyttsp_power_on:BL103: c_id=C0C1C2
- <6>kxtf9 1-000f: WHO_AM_I = 0x01
- <6>input: kxtf9_accel as /devices/virtual/input/input3
- <6>using rtc device, twl_rtc, for alarms
- <6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <4>twl_rtc twl_rtc: Cannot enable wakeup for IRQ 379
- <6>i2c /dev entries driver
- <6>Linux video capture interface: v2.00
- <6>omap3isp omap3isp: Revision 15.0 found
- <6>omap-iommu omap-iommu.0: isp: version 1.1
- <7>Saving csi2 context
- <7>Restoring csi2 context
- <7>Saving csi2 context
- <6>usbcore: registered new interface driver uvcvideo
- <6>USB Video Class driver (v1.1.0)
- <6>Driver for 1-wire Dallas network protocol.
- <6>omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
- <6>cyttsp_power_on:SI102: tver=1100 a_id=AA1D aver=0006
- <6>cyttsp_power_on:SI103: c_id=C0C1C2
- <6>w1_master_driver w1 bus master: Family 1 for 01.000000000000.3d is not registered.
- <4>max17042: max17042_init ...
- <4>max17042: max17042_probe ...
- <4>max17042: next history save at 4294936954
- <4>max17042: max17042_probe > IRQ is 260
- <4>max17042 GPIO pin read 1
- <4>max17042: max17042_device_power_on ...
- <4>max17042: max17042_hw_init ...
- <4>max17042: BATTERY Detected!
- <4>config = 0x2214
- <4>Valert = 0xff9b
- <4>Salert = 0xff05
- <4>config = 0x2214
- <4>config = 0x2214
- <4>shdntimer = 0x0002
- <4>max17042: max17042_verify ...
- <6>max17042 1-0036: Version = 0x0092
- <6>max17042 1-0036: support ver. 1.0.0 enabled
- <4>i2c-core: driver [max17042] using legacy suspend method
- <4>i2c-core: driver [max17042] using legacy resume method
- <4>MAXIM 8903 Charger registering!
- <4>MAXIM 8903 Charger Initializing...
- <4>MAXIM8903: Request CHARGER FLT IRQ successfully!
- <4>max8903_charger_enable: B&N USB CHARGER(500mA) Detected!
- <4>MAX8903: Charging is now enabled!
- <6>OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- <6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
- <6>(stc): st_register(2)
- <6>(stc): chnl_id list empty :2
- <6>cpuidle: using governor ladder
- <6>cpuidle: using governor menu
- <6>(stk) : st_kim_start
- <6>omap_pwm_led omap_pwm_led.0: OMAP PWM LED (lcd-backlight) at GP timer 8/0
- <7>Registered led device: lcd-backlight
- <6>usbcore: registered new interface driver usbhid
- <6>usbhid: USB HID core driver
- <6>logger: created 256K log 'log_main'
- <6>logger: created 256K log 'log_events'
- <6>logger: created 256K log 'log_radio'
- <6>logger: created 256K log 'log_system'
- <6>DSP Bridge driver loaded
- <6>usbcore: registered new interface driver snd-usb-audio
- <6>mmc0: new high speed MMC card at address 0001
- <6>mmcblk0: mmc0:0001 SEM08G 7.39 GiB
- <6>mmcblk0boot0: mmc0:0001 SEM08G partition 1 1.00 MiB
- <6>mmcblk0boot1: mmc0:0001 SEM08G partition 2 1.00 MiB
- <4>omap3epd-sound: Audio SoC init +
- <6>(stk) :ldisc_install = 1
- <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 >
- <6> mmcblk0boot1: unknown partition table
- <6> mmcblk0boot0: unknown partition table
- <4>mmc1: host does not support reading read-only switch. assuming write-enable.
- <6>mmc1: new high speed SDHC card at address c552
- <6>mmcblk1: mmc1:c552 SD08G 7.42 GiB
- <6> mmcblk1:
- <6>Completed adding dapm widgets size = 22
- <6>Completed adding DAPM routes = 21
- <6>widgets updated
- <6>asoc: tlv320aic31xx-dai <-> omap-mcbsp-dai.1 mapping ok
- <4>sys_ck = 26000000
- <4>clkout2_src_ck = 26000000
- <4>sys_clkout2 = 13000000
- <4>omap3epd-sound: Audio SoC init -
- <6>ALSA device list:
- <6> #0: OMAP3 EDP(tlv320aic31xx)
- <6>oprofile: hardware counters not available
- <6>oprofile: using timer interrupt.
- <6>Netfilter messages via NETLINK v0.30.
- <6>nf_conntrack version 0.5.0 (7189 buckets, 28756 max)
- <6>ctnetlink v0.93: registering with nfnetlink.
- <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>xt_time: kernel timezone is -0000
- <6>ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>arp_tables: (C) 2002 David S. Miller
- <6>TCP cubic registered
- <6>Initializing XFRM netlink socket
- <6>NET: Registered protocol family 10
- <6>Mobile IPv6
- <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>IPv6 over IPv4 tunneling driver
- <6>NET: Registered protocol family 17
- <6>NET: Registered protocol family 15
- <6>Bluetooth: RFCOMM TTY layer initialized
- <6>Bluetooth: RFCOMM socket layer initialized
- <6>Bluetooth: RFCOMM ver 1.11
- <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>Bluetooth: BNEP filters: protocol multicast
- <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>lib80211: common routines for IEEE802.11 drivers
- <7>lib80211_crypt: registered algorithm 'NULL'
- <5>Registering the dns_resolver key type
- <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- <6>ThumbEE CPU extension supported.
- <6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- <6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- <6>SmartReflex class 1.5 driver: initialized (86400000ms)
- <6>cpufreq_interactive_input_connect: connect to cyttsp-i2c
- <4>omap3_idle_init: core off state C7 disabled due to i583
- <6>clock: disabling unused clocks to save power
- <6>cannot apply mgr(tv) on inactive device
- <4>omapfb omapfb: failed to apply dispc config
- <3>omapdss DSI error: Requested pixel clock not possible with the current OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning the constraint off.
- <6>twl_rtc twl_rtc: setting system clock to 2000-04-22 19:04:24 UTC (956430264)
- <7>Restoring csi2 context
- <6>omap3 omap3isp CSI memvs initted
- <7>Saving csi2 context
- <6>Freeing init memory: 208K
- <3>init: could not import file '/system/etc/init.local.rc' from '/init.rc'
- <4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <3>init: cannot open '/initlogo.rle'
- <3>init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
- <6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: barrier=1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <6>EXT4-fs (mmcblk0p6): recovery complete
- <6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>EXT4-fs (mmcblk0p7): recovery complete
- <6>EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>Compat-wireless backport release: ol_R5.SP3.01
- <6>Backport based on wl12xx.git ol_R5.SP3.01
- <6>cfg80211: Calling CRDA to update world regulatory domain
- <6>wl12xx: driver version:
- <6>wl12xx: compilation time: Tue Oct 16 02:19:52 2012
- <4>omap3_pm_off_mode_enable: Core OFF disabled due to errata i583
- <6>sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1200000Calib=1012500 margin=0
- <3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'
- <3>init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
- <3>init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
- <3>android_usb: already disabled
- <3>init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
- <3>init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
- <3>init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
- <3>android_usb: already disabled
- <6>adb_open
- <6>mtp_bind_config
- <6>adb_bind_config
- <6>android_work: sent uevent USB_STATE=CONNECTED
- <6>android_work: sent uevent USB_STATE=DISCONNECTED
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>android_usb gadget: high speed config #1: android
- <6>android_work: sent uevent USB_STATE=CONNECTED
- <6>android_work: sent uevent USB_STATE=CONFIGURED
- <6>proc_load: Processor Loaded /system/lib/dsp/baseimage.dof
- <6>proc_start: dsp in running state
- <3>procwrap_detach: deprecated dspbridge ioctl
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <3>Bluetooth: st_register failed -22
- <3>init: no such service 'hciattach'
- <6>(stc): st_register(2)
- <6>(stc): chnl_id list empty :2
- <6>(stk) : st_kim_start
- <6>(stk) :ldisc_install = 1
- <6>acc_open
- <6>acc_release
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <7>usb usb1: usb auto-resume
- <7>hub 1-0:1.0: hub_resume
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <6>mtp_open
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <6>kxtf9 1-000f: IRQ TAP2 [10]
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <3>Bluetooth: st_register failed -22
- <6>(stc): st_register(2)
- <6>(stc): chnl_id list empty :2
- <6>(stk) : st_kim_start
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <4>sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=1000000 samples=52
- <6>sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1000000Calib=900000 margin=0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <3>Bluetooth: st_register failed -22
- <6>(stc): st_register(2)
- <6>(stc): chnl_id list empty :2
- <6>(stk) : st_kim_start
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <3>Bluetooth: st_register failed -22
- <6>(stc): st_register(2)
- <6>(stc): chnl_id list empty :2
- <6>(stk) : st_kim_start
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <3>Bluetooth: st_register failed -22
- <6>(stc): st_register(2)
- <6>(stc): chnl_id list empty :2
- <6>(stk) : st_kim_start
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
- <3>(stk) : timed out waiting for ldisc to be un-installed
- <3>Bluetooth: st_register failed -22
- <6>(stc): st_register(2)
- <6>(stc): chnl_id list empty :2
- <6>(stk) : st_kim_start
- <6>(stk) :ldisc_install = 1
- <3>(stk) :ldisc installation timeout
- <6>(stk) :ldisc_install = 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement