Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Stopping dockerd: start-stop-daemon: warning: killing process 177: No such process␍
- ␊FAIL␍
- ␊Stopping network: ifdown: interface eth0 not configured␍
- ␊OK␍
- ␊Stopping iptables: modprobe: module ip_tables not found in modules.dep␍
- ␊iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?)␍
- ␊Perhaps iptables or your kernel needs to be upgraded.␍
- ␊FAIL␍
- ␊Unmounting cgroupfs hierarchy: OK␍
- ␊Saving random seed: OK␍
- ␊Stopping mdev... stopped process in pidfile '/var/run/mdev.pid' (pid 111)␍
- ␊OK␍
- ␊Stopping klogd: OK␍
- ␊Stopping syslogd: OK␍
- ␊[ 191.803191] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)␍
- ␊␍
- The system is going down NOW!␍
- ␊␍
- Sent SIGTERM to all processes␍
- ␊␍
- Sent SIGKILL to all processes␍
- ␊␍
- Requesting system reboot␍
- ␊[ 193.858847] reboot: Restarting system␍
- ␊␍
- ␊U-Boot SPL 2017.01-rc2-00057-g32ab1804cd-dirty (Sep 29 2022 - 11:51:14)␍
- ␊DRAM: 64 MiB␍
- ␊Trying to boot from MMC1␍
- ␊␍
- ␊U-Boot 2017.01-rc2-00057-g32ab1804cd-dirty (Sep 29 2022 - 11:51:14 -0300) Allwinner Technology␍
- ␊␍
- ␊CPU: Allwinner V3s (SUN8I 1681)␍
- ␊Model: Lichee Pi Zero␍
- ␊DRAM: 64 MiB␍
- ␊MMC: SUNXI SD/MMC: 0␍
- ␊*** Warning - bad CRC, using default environment␍
- ␊␍
- ␊Setting up a 800x480 lcd console (overscan 0x0)␍
- ␊dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6␍
- ␊In: serial@01c28000␍
- ␊Out: serial@01c28000␍
- ␊Err: serial@01c28000␍
- ␊␍
- ␊␍
- ␊U-Boot 2017.01-rc2-00057-g32ab1804cd-dirty (Sep 29 2022 - 11:51:14 -0300) Allwinner Technology␍
- ␊␍
- ␊CPU: Allwinner V3s (SUN8I 1681)␍
- ␊Model: Lichee Pi Zero␍
- ␊DRAM: 64 MiB␍
- ␊MMC: SUNXI SD/MMC: 0␍
- ␊*** Warning - bad CRC, using default environment␍
- ␊␍
- ␊Setting up a 800x480 lcd console (overscan 0x0)␍
- ␊dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6␍
- ␊In: serial@01c28000␍
- ␊Out: serial@01c28000␍
- ␊Err: serial@01c28000␍
- ␊Net: phy interface0␍
- ␊eth0: ethernet@1c30000␍
- ␊starting USB...␍
- ␊No controllers found␍
- ␊Hit any key to stop autoboot: 2 <0x08><0x08><0x08> 1 <0x08><0x08><0x08> 0 ␍
- ␊reading zImage␍
- ␊4223960 bytes read in 260 ms (15.5 MiB/s)␍
- ␊reading sun8i-v3s-licheepi-zero-with-800x480-lcd.dtb␍
- ␊11593 bytes read in 28 ms (404.3 KiB/s)␍
- ␊## Flattened Device Tree blob at 43000000␍
- ␊ Booting using the fdt blob at 0x43000000␍
- ␊ Loading Device Tree to 42dfa000, end 42dffd48 ... OK␍
- ␊␍
- ␊Starting kernel ...␍
- ␊␍
- ␊[ 0.000000] Booting Linux on physical CPU 0x0␍
- ␊[ 0.000000] Linux version 5.2.0-licheepi-zero+ (gaston@gaston-VirtualBox) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12)) #1 SMP Thu Sep 29 21:34:03 -03 2022␍
- ␊[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d␍
- ␊[ 0.000000] CPU: div instructions available: patching division code␍
- ␊[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache␍
- ␊[ 0.000000] OF: fdt: Machine model: Lichee Pi Zero␍
- ␊[ 0.000000] Memory policy: Data cache writealloc␍
- ␊[ 0.000000] percpu: Embedded 16 pages/cpu s34508 r8192 d22836 u65536␍
- ␊[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 15883␍
- ␊[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200 panic=10 rootwait root=/dev/mmcblk0p2 earlyprintk rw vt.global_cursor_default=0␍
- ␊[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)␍
- ␊[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)␍
- ␊[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off␍
- ␊[ 0.000000] Memory: 53548K/64036K available (6144K kernel code, 302K rwdata, 1696K rodata, 1024K init, 252K bss, 10488K reserved, 0K cma-reserved, 0K highmem)␍
- ␊[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1␍
- ␊[ 0.000000] rcu: Hierarchical RCU implementation.␍
- ␊[ 0.000000] rcu: ⇥ RCU event tracing is enabled.␍
- ␊[ 0.000000] rcu: ⇥ RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.␍
- ␊[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.␍
- ␊[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1␍
- ␊[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16␍
- ␊[ 0.000000] random: get_random_bytes called from start_kernel+0x2f8/0x490 with crng_init=0␍
- ␊[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).␍
- ␊[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns␍
- ␊[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns␍
- ␊[ 0.000019] Switching to timer-based delay loop, resolution 41ns␍
- ␊[ 0.000203] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns␍
- ␊[ 0.000437] Console: colour dummy device 80x30␍
- ␊[ 0.000729] printk: console [tty0] enabled␍
- ␊[ 0.000787] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)␍
- ␊[ 0.000815] pid_max: default: 32768 minimum: 301␍
- ␊[ 0.000988] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
- ␊[ 0.001018] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
- ␊[ 0.001854] CPU: Testing write buffer coherency: ok␍
- ␊[ 0.002407] /cpus/cpu@0 missing clock-frequency property␍
- ␊[ 0.002458] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000␍
- ␊[ 0.003266] Setting up static identity map for 0x40100000 - 0x40100060␍
- ␊[ 0.003525] rcu: Hierarchical SRCU implementation.␍
- ␊[ 0.004088] smp: Bringing up secondary CPUs ...␍
- ␊[ 0.004130] smp: Brought up 1 node, 1 CPU␍
- ␊[ 0.004146] SMP: Total of 1 processors activated (48.00 BogoMIPS).␍
- ␊[ 0.004162] CPU: All CPU(s) started in SVC mode.␍
- ␊[ 0.005287] devtmpfs: initialized␍
- ␊[ 0.008769] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5␍
- ␊[ 0.009108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns␍
- ␊[ 0.009156] futex hash table entries: 256 (order: 2, 16384 bytes, linear)␍
- ␊[ 0.009414] pinctrl core: initialized pinctrl subsystem␍
- ␊[ 0.010639] NET: Registered protocol family 16␍
- ␊[ 0.011218] DMA: preallocated 256 KiB pool for atomic coherent allocations␍
- ␊[ 0.012514] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.␍
- ␊[ 0.012561] hw-breakpoint: maximum watchpoint size is 8 bytes.␍
- ␊[ 0.036158] SCSI subsystem initialized␍
- ␊[ 0.036454] usbcore: registered new interface driver usbfs␍
- ␊[ 0.036544] usbcore: registered new interface driver hub␍
- ␊[ 0.036670] usbcore: registered new device driver usb␍
- ␊[ 0.036902] mc: Linux media interface: v0.10␍
- ␊[ 0.036957] videodev: Linux video capture interface: v2.00␍
- ␊[ 0.037148] FPGA manager framework␍
- ␊[ 0.037232] Advanced Linux Sound Architecture Driver Initialized.␍
- ␊[ 0.038607] clocksource: Switched to clocksource arch_sys_counter␍
- ␊[ 0.051004] NET: Registered protocol family 2␍
- ␊[ 0.051880] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)␍
- ␊[ 0.051949] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
- ␊[ 0.051988] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)␍
- ␊[ 0.052019] TCP: Hash tables configured (established 1024 bind 1024)␍
- ␊[ 0.052185] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)␍
- ␊[ 0.052246] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)␍
- ␊[ 0.052561] NET: Registered protocol family 1␍
- ␊[ 0.054518] Initialise system trusted keyrings␍
- ␊[ 0.054933] workingset: timestamp_bits=30 max_order=14 bucket_order=0␍
- ␊[ 0.097011] Key type asymmetric registered␍
- ␊[ 0.097055] Asymmetric key parser 'x509' registered␍
- ␊[ 0.097167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)␍
- ␊[ 0.097194] io scheduler mq-deadline registered␍
- ␊[ 0.097208] io scheduler kyber registered␍
- ␊[ 0.098284] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO␍
- ␊[ 0.102442] sun8i-v3s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver␍
- ␊[ 0.102912] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator␍
- ␊[ 0.103691] pwm-backlight backlight: backlight supply power not found, using dummy regulator␍
- ␊[ 0.173266] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled␍
- ␊[ 0.176648] printk: console [ttyS0] disabled␍
- ␊[ 0.196984] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 34, base_baud = 1500000) is a U6_16550A␍
- ␊[ 0.724056] printk: console [ttyS0] enabled␍
- ␊[ 0.730125] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator␍
- ␊[ 0.764874] panel-simple panel: panel supply power not found, using dummy regulator␍
- ␊[ 0.774642] libphy: Fixed MDIO Bus: probed␍
- ␊[ 0.779094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver␍
- ␊[ 0.785642] ehci-platform: EHCI generic platform driver␍
- ␊[ 0.791213] ehci-platform 1c1a000.usb: EHCI Host Controller␍
- ␊[ 0.796844] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1␍
- ␊[ 0.804878] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000␍
- ␊[ 0.838618] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00␍
- ␊[ 0.845855] hub 1-0:1.0: USB hub found␍
- ␊[ 0.849862] hub 1-0:1.0: 1 port detected␍
- ␊[ 0.854506] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver␍
- ␊[ 0.860856] ohci-platform: OHCI generic platform driver␍
- ␊[ 0.866426] ohci-platform 1c1a400.usb: Generic Platform OHCI controller␍
- ␊[ 0.873175] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2␍
- ␊[ 0.881183] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400␍
- ␊[ 0.953749] hub 2-0:1.0: USB hub found␍
- ␊[ 0.957613] hub 2-0:1.0: 1 port detected␍
- ␊[ 0.964988] usbcore: registered new interface driver usb-storage␍
- ␊[ 0.972658] sun6i-rtc 1c20400.rtc: registered as rtc0␍
- ␊[ 0.977748] sun6i-rtc 1c20400.rtc: RTC enabled␍
- ␊[ 0.982499] i2c /dev entries driver␍
- ␊[ 0.987471] input: ns2009_ts as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0048/input/input0␍
- ␊[ 0.997221] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)␍
- ␊[ 1.005988] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator␍
- ␊[ 1.041266] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB␍
- ␊[ 1.048897] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator␍
- ␊[ 1.060313] usbcore: registered new interface driver usbhid␍
- ␊[ 1.065918] usbhid: USB HID core driver␍
- ␊[ 1.072657] Initializing XFRM netlink socket␍
- ␊[ 1.077001] NET: Registered protocol family 17␍
- ␊[ 1.082183] Registering SWP/SWPB emulation handler␍
- ␊[ 1.088099] Loading compiled-in X.509 certificates␍
- ␊[ 1.098345] simple-framebuffer 43e89000.framebuffer: framebuffer at 0x43e89000, 0x177000 bytes, mapped to 0x(ptrval)␍
- ␊[ 1.109052] simple-framebuffer 43e89000.framebuffer: format=x8r8g8b8, mode=800x480x32, linelength=3200␍
- ␊[ 1.125276] Console: switching to colour frame buffer device 100x30␍
- ␊[ 1.141553] simple-framebuffer 43e89000.framebuffer: fb0: simplefb registered!␍
- ␊[ 1.153925] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator␍
- ␊[ 1.174127] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0746880)␍
- ␊[ 1.185685] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0743b7c)␍
- ␊[ 1.197408] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).␍
- ␊[ 1.208001] [drm] No driver support for vblank timestamp query.␍
- ␊[ 1.217893] fb0: switching to sun4i-drm-fb from simple␍
- ␊[ 1.227881] Console: switching to colour dummy device 80x30␍
- ␊[ 1.234645] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0␍
- ␊[ 1.271851] mmc0: host does not support reading read-only switch, assuming write-enable␍
- ␊[ 1.273887] mmc0: new high speed SDHC card at address 1234␍
- ␊[ 1.275734] mmcblk0: mmc0:1234 SA04G 3.71 GiB ␍
- ␊[ 1.277750] mmcblk0: p1 p2␍
- ␊[ 1.294856] Console: switching to colour frame buffer device 100x30␍
- ␊[ 1.360036] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device␍
- ␊[ 1.371186] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator␍
- ␊[ 1.389207] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver␍
- ␊[ 1.398243] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3␍
- ␊[ 1.410738] hub 3-0:1.0: USB hub found␍
- ␊[ 1.417923] hub 3-0:1.0: 1 port detected␍
- ␊[ 1.426423] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:03:26 UTC (206)␍
- ␊[ 1.438285] vcc3v0: disabling␍
- ␊[ 1.444634] vcc5v0: disabling␍
- ␊[ 1.450851] ALSA device list:␍
- ␊[ 1.456893] No soundcards found.␍
- ␊[ 1.486827] random: fast init done␍
- ␊[ 1.494833] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)␍
- ␊[ 1.506209] VFS: Mounted root (ext4 filesystem) on device 179:2.␍
- ␊[ 1.516651] devtmpfs: mounted␍
- ␊[ 1.523996] Freeing unused kernel memory: 1024K␍
- ␊[ 1.531886] Run /sbin/init as init process␍
- ␊[ 1.731335] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)␍
- ␊Starting syslogd: OK␍
- ␊Starting klogd: OK␍
- ␊Running sysctl: OK␍
- ␊Starting mdev... OK␍
- ␊[ 2.378824] usb 2-1: new full-speed USB device number 2 using ohci-platform␍
- ␊[ 2.697562] input: 2.4G Composite Devic as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.0/0003:0627:697D.0001/input/input1␍
- ␊[ 2.780011] hid-generic 0003:0627:697D.0001: input: USB HID v1.10 Keyboard [2.4G Composite Devic] on usb-1c1a400.usb-1/input0␍
- ␊[ 2.845239] input: 2.4G Composite Devic Mouse as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input2␍
- ␊[ 2.919323] input: 2.4G Composite Devic Consumer Control as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input3␍
- ␊[ 3.009470] input: 2.4G Composite Devic System Control as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input4␍
- ␊[ 3.069026] hid-generic 0003:0627:697D.0002: input: USB HID v1.10 Mouse [2.4G Composite Devic] on usb-1c1a400.usb-1/input1␍
- ␊[ 3.295495] mousedev: PS/2 mouse device common for all mice␍
- ␊Initializing random number generator: OK␍
- ␊Saving random seed: [ 3.404260] random: dd: uninitialized urandom read (512 bytes read)␍
- ␊OK␍
- ␊Mounting cgroupfs hierarchy: OK␍
- ␊Starting iptables: OK␍
- ␊Starting network: Waiting for interface eth0 to appear............... timeout!␍
- ␊run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1␍
- ␊FAIL␍
- ␊Starting dockerd: OK␍
- ␊[ 76.968697] random: crng init done␍
- ␊Stopping dockerd: start-stop-daemon: warning: killing process 177: No such process␍
- ␊FAIL␍
- ␊Stopping network: ifdown: interface eth0 not configured␍
- ␊OK␍
- ␊Stopping iptables: modprobe: module ip_tables not found in modules.dep␍
- ␊iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?)␍
- ␊Perhaps iptables or your kernel needs to be upgraded.␍
- ␊FAIL␍
- ␊Unmounting cgroupfs hierarchy: OK␍
- ␊Saving random seed: OK␍
- ␊Stopping mdev... stopped process in pidfile '/var/run/mdev.pid' (pid 110)␍
- ␊OK␍
- ␊Stopping klogd: OK␍
- ␊Stopping syslogd: OK␍
- ␊[ 846.759659] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)␍
- ␊␍
- The system is going down NOW!␍
- ␊␍
- Sent SIGTERM to all processes␍
- ␊␍
- Sent SIGKILL to all processes␍
- ␊␍
- Requesting system reboot␍
- ␊[ 848.818896] reboot: Restarting system␍
- ␊␍
- ␊U-Boot SPL 2017.01-rc2-00057-g32ab1804cd-dirty (Sep 29 2022 - 11:51:14)␍
- ␊DRAM: 64 MiB␍
- ␊Trying to boot from MMC1␍
- ␊␍
- ␊U-Boot 2017.01-rc2-00057-g32ab1804cd-dirty (Sep 29 2022 - 11:51:14 -0300) Allwinner Technology␍
- ␊␍
- ␊CPU: Allwinner V3s (SUN8I 1681)␍
- ␊Model: Lichee Pi Zero␍
- ␊DRAM: 64 MiB␍
- ␊MMC: SUNXI SD/MMC: 0␍
- ␊*** Warning - bad CRC, using default environment␍
- ␊␍
- ␊Setting up a 800x480 lcd console (overscan 0x0)␍
- ␊dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6␍
- ␊In: serial@01c28000␍
- ␊Out: serial@01c28000␍
- ␊Err: serial@01c28000␍
- ␊␍
- ␊␍
- ␊U-Boot 2017.01-rc2-00057-g32ab1804cd-dirty (Sep 29 2022 - 11:51:14 -0300) Allwinner Technology␍
- ␊␍
- ␊CPU: Allwinner V3s (SUN8I 1681)␍
- ␊Model: Lichee Pi Zero␍
- ␊DRAM: 64 MiB␍
- ␊MMC: SUNXI SD/MMC: 0␍
- ␊*** Warning - bad CRC, using default environment␍
- ␊␍
- ␊Setting up a 800x480 lcd console (overscan 0x0)␍
- ␊dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6␍
- ␊In: serial@01c28000␍
- ␊Out: serial@01c28000␍
- ␊Err: serial@01c28000␍
- ␊Net: phy interface0␍
- ␊eth0: ethernet@1c30000␍
- ␊starting USB...␍
- ␊No controllers found␍
- ␊Hit any key to stop autoboot: 2 <0x08><0x08><0x08> 1 <0x08><0x08><0x08> 0 ␍
- ␊reading zImage␍
- ␊4223960 bytes read in 260 ms (15.5 MiB/s)␍
- ␊reading sun8i-v3s-licheepi-zero-with-800x480-lcd.dtb␍
- ␊11593 bytes read in 28 ms (404.3 KiB/s)␍
- ␊## Flattened Device Tree blob at 43000000␍
- ␊ Booting using the fdt blob at 0x43000000␍
- ␊ Loading Device Tree to 42dfa000, end 42dffd48 ... OK␍
- ␊␍
- ␊Starting kernel ...␍
- ␊␍
- ␊[ 0.000000] Booting Linux on physical CPU 0x0␍
- ␊[ 0.000000] Linux version 5.2.0-licheepi-zero+ (gaston@gaston-VirtualBox) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12)) #1 SMP Thu Sep 29 21:34:03 -03 2022␍
- ␊[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d␍
- ␊[ 0.000000] CPU: div instructions available: patching division code␍
- ␊[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache␍
- ␊[ 0.000000] OF: fdt: Machine model: Lichee Pi Zero␍
- ␊[ 0.000000] Memory policy: Data cache writealloc␍
- ␊[ 0.000000] percpu: Embedded 16 pages/cpu s34508 r8192 d22836 u65536␍
- ␊[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 15883␍
- ␊[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200 panic=10 rootwait root=/dev/mmcblk0p2 earlyprintk rw vt.global_cursor_default=0␍
- ␊[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)␍
- ␊[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)␍
- ␊[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off␍
- ␊[ 0.000000] Memory: 53548K/64036K available (6144K kernel code, 302K rwdata, 1696K rodata, 1024K init, 252K bss, 10488K reserved, 0K cma-reserved, 0K highmem)␍
- ␊[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1␍
- ␊[ 0.000000] rcu: Hierarchical RCU implementation.␍
- ␊[ 0.000000] rcu: ⇥ RCU event tracing is enabled.␍
- ␊[ 0.000000] rcu: ⇥ RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.␍
- ␊[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.␍
- ␊[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1␍
- ␊[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16␍
- ␊[ 0.000000] random: get_random_bytes called from start_kernel+0x2f8/0x490 with crng_init=0␍
- ␊[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).␍
- ␊[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns␍
- ␊[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns␍
- ␊[ 0.000019] Switching to timer-based delay loop, resolution 41ns␍
- ␊[ 0.000201] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns␍
- ␊[ 0.000437] Console: colour dummy device 80x30␍
- ␊[ 0.000729] printk: console [tty0] enabled␍
- ␊[ 0.000786] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)␍
- ␊[ 0.000815] pid_max: default: 32768 minimum: 301␍
- ␊[ 0.000987] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
- ␊[ 0.001020] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
- ␊[ 0.001833] CPU: Testing write buffer coherency: ok␍
- ␊[ 0.002389] /cpus/cpu@0 missing clock-frequency property␍
- ␊[ 0.002438] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000␍
- ␊[ 0.003255] Setting up static identity map for 0x40100000 - 0x40100060␍
- ␊[ 0.003518] rcu: Hierarchical SRCU implementation.␍
- ␊[ 0.004068] smp: Bringing up secondary CPUs ...␍
- ␊[ 0.004111] smp: Brought up 1 node, 1 CPU␍
- ␊[ 0.004128] SMP: Total of 1 processors activated (48.00 BogoMIPS).␍
- ␊[ 0.004142] CPU: All CPU(s) started in SVC mode.␍
- ␊[ 0.005265] devtmpfs: initialized␍
- ␊[ 0.008730] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5␍
- ␊[ 0.009064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns␍
- ␊[ 0.009116] futex hash table entries: 256 (order: 2, 16384 bytes, linear)␍
- ␊[ 0.009372] pinctrl core: initialized pinctrl subsystem␍
- ␊[ 0.010587] NET: Registered protocol family 16␍
- ␊[ 0.011169] DMA: preallocated 256 KiB pool for atomic coherent allocations␍
- ␊[ 0.012465] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.␍
- ␊[ 0.012510] hw-breakpoint: maximum watchpoint size is 8 bytes.␍
- ␊[ 0.036101] SCSI subsystem initialized␍
- ␊[ 0.036394] usbcore: registered new interface driver usbfs␍
- ␊[ 0.036490] usbcore: registered new interface driver hub␍
- ␊[ 0.036618] usbcore: registered new device driver usb␍
- ␊[ 0.036851] mc: Linux media interface: v0.10␍
- ␊[ 0.036906] videodev: Linux video capture interface: v2.00␍
- ␊[ 0.037100] FPGA manager framework␍
- ␊[ 0.037182] Advanced Linux Sound Architecture Driver Initialized.␍
- ␊[ 0.038555] clocksource: Switched to clocksource arch_sys_counter␍
- ␊[ 0.051096] NET: Registered protocol family 2␍
- ␊[ 0.051955] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)␍
- ␊[ 0.052023] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
- ␊[ 0.052060] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)␍
- ␊[ 0.052093] TCP: Hash tables configured (established 1024 bind 1024)␍
- ␊[ 0.052262] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)␍
- ␊[ 0.052325] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)␍
- ␊[ 0.052650] NET: Registered protocol family 1␍
- ␊[ 0.054575] Initialise system trusted keyrings␍
- ␊[ 0.054988] workingset: timestamp_bits=30 max_order=14 bucket_order=0␍
- ␊[ 0.099440] Key type asymmetric registered␍
- ␊[ 0.099484] Asymmetric key parser 'x509' registered␍
- ␊[ 0.099596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)␍
- ␊[ 0.099621] io scheduler mq-deadline registered␍
- ␊[ 0.099635] io scheduler kyber registered␍
- ␊[ 0.100702] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO␍
- ␊[ 0.104539] sun8i-v3s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver␍
- ␊[ 0.105010] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator␍
- ␊[ 0.105777] pwm-backlight backlight: backlight supply power not found, using dummy regulator␍
- ␊[ 0.175352] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled␍
- ␊[ 0.178863] printk: console [ttyS0] disabled␍
- ␊[ 0.199173] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 34, base_baud = 1500000) is a U6_16550A␍
- ␊[ 0.726210] printk: console [ttyS0] enabled␍
- ␊[ 0.732230] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator␍
- ␊[ 0.766952] panel-simple panel: panel supply power not found, using dummy regulator␍
- ␊[ 0.776693] libphy: Fixed MDIO Bus: probed␍
- ␊[ 0.781147] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver␍
- ␊[ 0.787687] ehci-platform: EHCI generic platform driver␍
- ␊[ 0.793245] ehci-platform 1c1a000.usb: EHCI Host Controller␍
- ␊[ 0.798944] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1␍
- ␊[ 0.806916] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000␍
- ␊[ 0.838563] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00␍
- ␊[ 0.845803] hub 1-0:1.0: USB hub found␍
- ␊[ 0.849805] hub 1-0:1.0: 1 port detected␍
- ␊[ 0.854447] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver␍
- ␊[ 0.860800] ohci-platform: OHCI generic platform driver␍
- ␊[ 0.866370] ohci-platform 1c1a400.usb: Generic Platform OHCI controller␍
- ␊[ 0.873110] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2␍
- ␊[ 0.881118] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400␍
- ␊[ 0.953691] hub 2-0:1.0: USB hub found␍
- ␊[ 0.957562] hub 2-0:1.0: 1 port detected␍
- ␊[ 0.964940] usbcore: registered new interface driver usb-storage␍
- ␊[ 0.972605] sun6i-rtc 1c20400.rtc: registered as rtc0␍
- ␊[ 0.977694] sun6i-rtc 1c20400.rtc: RTC enabled␍
- ␊[ 0.982439] i2c /dev entries driver␍
- ␊[ 0.987397] input: ns2009_ts as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0048/input/input0␍
- ␊[ 0.997174] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)␍
- ␊[ 1.005941] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator␍
- ␊[ 1.041217] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB␍
- ␊[ 1.048847] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator␍
- ␊[ 1.060293] usbcore: registered new interface driver usbhid␍
- ␊[ 1.065896] usbhid: USB HID core driver␍
- ␊[ 1.072634] Initializing XFRM netlink socket␍
- ␊[ 1.076982] NET: Registered protocol family 17␍
- ␊[ 1.082164] Registering SWP/SWPB emulation handler␍
- ␊[ 1.088092] Loading compiled-in X.509 certificates␍
- ␊[ 1.098344] simple-framebuffer 43e89000.framebuffer: framebuffer at 0x43e89000, 0x177000 bytes, mapped to 0x(ptrval)␍
- ␊[ 1.109050] simple-framebuffer 43e89000.framebuffer: format=x8r8g8b8, mode=800x480x32, linelength=3200␍
- ␊[ 1.125276] Console: switching to colour frame buffer device 100x30␍
- ␊[ 1.141549] simple-framebuffer 43e89000.framebuffer: fb0: simplefb registered!␍
- ␊[ 1.153926] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator␍
- ␊[ 1.174039] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0746880)␍
- ␊[ 1.185600] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0743b7c)␍
- ␊[ 1.197322] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).␍
- ␊[ 1.207917] [drm] No driver support for vblank timestamp query.␍
- ␊[ 1.217802] fb0: switching to sun4i-drm-fb from simple␍
- ␊[ 1.227785] Console: switching to colour dummy device 80x30␍
- ␊[ 1.234543] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0␍
- ␊[ 1.271771] mmc0: host does not support reading read-only switch, assuming write-enable␍
- ␊[ 1.273801] mmc0: new high speed SDHC card at address 1234␍
- ␊[ 1.275637] mmcblk0: mmc0:1234 SA04G 3.71 GiB ␍
- ␊[ 1.277643] mmcblk0: p1 p2␍
- ␊[ 1.294762] Console: switching to colour frame buffer device 100x30␍
- ␊[ 1.359932] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device␍
- ␊[ 1.371075] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator␍
- ␊[ 1.389100] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver␍
- ␊[ 1.398144] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3␍
- ␊[ 1.410613] hub 3-0:1.0: USB hub found␍
- ␊[ 1.417797] hub 3-0:1.0: 1 port detected␍
- ␊[ 1.426300] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:17:59 UTC (1079)␍
- ␊[ 1.438250] vcc3v0: disabling␍
- ␊[ 1.444601] vcc5v0: disabling␍
- ␊[ 1.450822] ALSA device list:␍
- ␊[ 1.456872] No soundcards found.␍
- ␊[ 1.487196] random: fast init done␍
- ␊[ 1.495205] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)␍
- ␊[ 1.506588] VFS: Mounted root (ext4 filesystem) on device 179:2.␍
- ␊[ 1.517039] devtmpfs: mounted␍
- ␊[ 1.524401] Freeing unused kernel memory: 1024K␍
- ␊[ 1.532299] Run /sbin/init as init process␍
- ␊[ 1.732288] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)␍
- ␊Starting syslogd: OK␍
- ␊Starting klogd: OK␍
- ␊Running sysctl: OK␍
- ␊Starting mdev... OK␍
- ␊[ 2.378744] usb 2-1: new full-speed USB device number 2 using ohci-platform␍
- ␊[ 2.687663] input: 2.4G Composite Devic as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.0/0003:0627:697D.0001/input/input1␍
- ␊[ 2.769923] hid-generic 0003:0627:697D.0001: input: USB HID v1.10 Keyboard [2.4G Composite Devic] on usb-1c1a400.usb-1/input0␍
- ␊[ 2.835406] input: 2.4G Composite Devic Mouse as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input2␍
- ␊[ 2.910318] input: 2.4G Composite Devic Consumer Control as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input3␍
- ␊[ 2.999480] input: 2.4G Composite Devic System Control as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input4␍
- ␊[ 3.058968] hid-generic 0003:0627:697D.0002: input: USB HID v1.10 Mouse [2.4G Composite Devic] on usb-1c1a400.usb-1/input1␍
- ␊[ 3.297437] mousedev: PS/2 mouse device common for all mice␍
- ␊Initializing random number generator: OK␍
- ␊Saving random seed: [ 3.424202] random: dd: uninitialized urandom read (512 bytes read)␍
- ␊OK␍
- ␊Mounting cgroupfs hierarchy: OK␍
- ␊Starting iptables: OK␍
- ␊Starting network: ip: SIOCGIFFLAGS: No such device␍
- ␊FAIL␍
- ␊Starting dockerd: OK␍
- ␊[ 144.088644] random: crng init done␍
- ␊
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement