API tools faq
paste
Advertisement
Guest User

Easybox 802 Openwrt - ARV752DPW

a guest
Mar 1st, 2012
1,683
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.48 KB | None | 0 0
raw download clone embed print report
  1. ROM VER: 1.0.3
  2. CFG 01
  3. Readà
  4. ROM VER: 1.0.3
  5. CFG 01
  6. Read EEPROMX
  7. X
  8.  
  9.  
  10.  
  11. ========================================================================
  12. Wireless ADSL Gateway DANUBE Loader V1.00.01 build Sep 24 2008 10:11:06
  13. Arcadyan Technology Corporation
  14. ========================================================================
  15. MXIC MX29LV640BB bottom boot 16-bit mode found
  16.  
  17. Copying boot params.....DONE
  18.  
  19.  
  20. Press Space Bar 3 times to enter command mode ...123
  21. Yes, Enter command mode ...
  22.  
  23.  
  24. [DANUBE Boot]:!
  25.  
  26. Enter Administrator Mode !
  27.  
  28. ======================
  29. [#] Set Serial Number
  30. [2] Use Normal Firmware
  31. [3] Use ART-Testing Firmware
  32. [9] Taggle ART Firmware Enable/Disable
  33. [A] Set MAC Address
  34. [E] Erase Flash
  35. [G] Run Runtime Code
  36. [H] Set Options
  37. [M] Upload to Memory
  38. [P] Print Boot Params
  39. [R] Read from Memory
  40. [T] Memory Test
  41. [U] Upload to Flash
  42. [V] Set Board Version
  43. [W] Write to Memory
  44. [Y] Go to Memory
  45. [Z] Dump DDR Ram Register
  46. [0] Primary = Image 0
  47. [1] Primary = Image 1
  48. ======================
  49.  
  50. [DANUBE Boot]:m
  51.  
  52. RAM upload destination: (default:0x80002000) : 0x80500000
  53. Starting XModem download...(press Enter to abort)
  54. CC
  55.  
  56. XModem download Done.
  57. Do you want to execute the uploaded code? (Y/n)
  58.  
  59. [DANUBE Boot]:!
  60.  
  61. Enter Administrator Mode !
  62.  
  63. ======================
  64. [#] Set Serial Number
  65. [2] Use Normal Firmware
  66. [3] Use ART-Testing Firmware
  67. [9] Taggle ART Firmware Enable/Disable
  68. [A] Set MAC Address
  69. [E] Erase Flash
  70. [G] Run Runtime Code
  71. [H] Set Options
  72. [M] Upload to Memory
  73. [P] Print Boot Params
  74. [R] Read from Memory
  75. [T] Memory Test
  76. [U] Upload to Flash
  77. [V] Set Board Version
  78. [W] Write to Memory
  79. [Y] Go to Memory
  80. [Z] Dump DDR Ram Register
  81. [0] Primary = Image 0
  82. [1] Primary = Image 1
  83. ======================
  84.  
  85. [DANUBE Boot]:m
  86.  
  87. RAM upload destination: (default:0x80002000) : 0xa0400000
  88. Starting XModem download...(press Enter to abort)
  89. CC
  90.  
  91. XModem download Done.
  92. Do you want to execute the uploaded code? (Y/n)
  93. Jump to address 0xa0400000 ...
  94.  
  95.  
  96. U-Boot 2010.03 (Feb 29 2012 - 07:36:13)
  97.  
  98. Board: ARV752DPW
  99. SoC: Danube/Twinpass/Vinax-VE V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
  100. DRAM: 64 MB
  101. Flash: 8 MB
  102. Net:
  103. searching for rtl8306 switch ... failed
  104.  
  105. no known switch found ...
  106. lq_cpe_eth
  107. Hit any key to stop autoboot: 0
  108. ARV752DPW => setenv filesize 0x200004
  109. ARV752DPW => setenv kernel_addr 0xb0030000
  110. ARV752DPW => printenv
  111. bootcmd=run flash_flash
  112. bootdelay=2
  113. baudrate=115200
  114. loads_echo=
  115. ipaddr=192.168.1.1
  116. serverip=192.168.1.101
  117. rootpath="/export"
  118. gatewayip=192.168.1.254
  119. netmask=255.255.255.0
  120. ram_addr=0x80500000
  121. flashargs=setenv bootargs rootfstype=squashfs,jffs2
  122. nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
  123. addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
  124. addmisc=setenv bootargs ${bootargs} init=/etc/preinit console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}
  125. flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}
  126. flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}
  127. net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}
  128. net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}
  129. load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage
  130. update_uboot=tftp 0x80500000 ${tftppath}u-boot-ARV752DPW22.bin;era 0xb0000000 +${filesize};cp.b 0x80500000 0xb0000000 ${filesize}
  131. update_openwrt=tftp ${ram_addr} ${tftppath}ARV752DPW22-squashfs.image;era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
  132. ethaddr=ec:b9:b6:e8:72:85
  133. ethact=lq_cpe_eth
  134. bootargs=rootfstype=squashfs,jffs2 ip=192.168.1.1:192.168.1.101:192.168.1.254:255.255.255.0:::off init=/etc/preinit console=ttyS1,115200 ethaddr=ec:b9:b6:e8:72:85
  135. kernel_addr=0xb0030000
  136. stdin=serial
  137. stdout=serial
  138. stderr=serial
  139. ver=U-Boot 2010.03 (Feb 29 2012 - 07:36:13)
  140. filesize=0x200004
  141.  
  142. Environment size: 1454/65532 bytes
  143. ARV752DPW => era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
  144.  
  145. ................................. done
  146. Erased 33 sectors
  147. Copy to Flash... 9....8....7....6....5....4....3....2....1....done
  148. ARV752DPW => run flash_flash
  149. ## Booting kernel from Legacy Image at b0030000 ...
  150. Image Name: MIPS OpenWrt Linux-3.1.10
  151. Created: 2012-02-29 14:50:40 UTC
  152. Image Type: MIPS Linux Kernel Image (lzma compressed)
  153. Data Size: 980820 Bytes = 957.8 kB
  154. Load Address: 80002000
  155. Entry Point: 80002000
  156. Verifying Checksum ... OK
  157. Uncompressing Kernel Image ... OK
  158.  
  159. Starting kernel ...
  160.  
  161. [ 0.000000] Linux version 3.1.10 (openwrt@OpenWRTBuild) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Wed Feb 29 07:50:07 MST 2012
  162. [ 0.000000] SoC: Danube rev 1.3
  163. [ 0.000000] bootconsole [early0] enabled
  164. [ 0.000000] CPU revision is: 00019641 (MIPS 24Kc)
  165. [ 0.000000] Determined physical RAM map:
  166. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  167. [ 0.000000] Initrd not found or empty - disabling initrd
  168. [ 0.000000] Zone PFN ranges:
  169. [ 0.000000] Normal 0x00000000 -> 0x00004000
  170. [ 0.000000] Movable zone start PFN for each node
  171. [ 0.000000] early_node_map[1] active PFN ranges
  172. [ 0.000000] 0: 0x00000000 -> 0x00004000
  173. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  174. [ 0.000000] Kernel command line: console=ttyLTQ1,115200 rootfstype=squashfs,jffs2 machtype=ARV752DPW
  175. [ 0.000000] MIPS: no machine found for id 'ARV752DPW', supported machines:
  176. [ 0.000000] id name
  177. [ 0.000000] Generic Generic Lantiq based board
  178. [ 0.000000] EASY50712 EASY50712 Eval Board
  179. [ 0.000000] ARV752DPW22 ARV752DPW22 - Arcor A803
  180. [ 0.000000] ARV7518PW ARV7518PW - ASTORIA
  181. [ 0.000000] ARV7525PW ARV7525PW - Speedport W303V
  182. [ 0.000000] ARV4525PW ARV4525PW - Speedport W502V
  183. [ 0.000000] ARV452CPW ARV452CPW - Arcor A801
  184. [ 0.000000] ARV4520PW ARV4520PW - Airties WAV-281, Arcor A800
  185. [ 0.000000] ARV4518PW ARV4518PW - SMC7908A-ISP, Airties WAV-221
  186. [ 0.000000] ARV4510PW ARV4510PW - Wippies Homebox
  187. [ 0.000000] ARV3527P ARV3527P - Arcor Easybox 401
  188. [ 0.000000] GIGASX76X GIGASX76X - Gigaset SX761,SX762,SX763
  189. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  190. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  191. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  192. [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  193. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  194. [ 0.000000] Writing ErrCtl register=000293a8
  195. [ 0.000000] Readback ErrCtl register=000293a8
  196. [ 0.000000] Memory: 61936k/65536k available (2317k kernel code, 3600k reserved, 389k data, 168k init, 0k highmem)
  197. [ 0.000000] NR_IRQS:256
  198. [ 0.000000] CPU Clock: 333MHz
  199. [ 0.000000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
  200. [ 0.040000] pid_max: default: 32768 minimum: 301
  201. [ 0.044000] Mount-cache hash table entries: 512
  202. [ 0.052000] NET: Registered protocol family 16
  203. [ 0.064000] MIPS: machine is Generic Lantiq based board
  204. [ 0.076000] bio: create slab <bio-0> at 0
  205. [ 0.084000] Switching to clocksource MIPS
  206. [ 0.092000] NET: Registered protocol family 2
  207. [ 0.096000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  208. [ 0.104000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  209. [ 0.112000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  210. [ 0.120000] TCP: Hash tables configured (established 2048 bind 2048)
  211. [ 0.124000] TCP reno registered
  212. [ 0.128000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  213. [ 0.136000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  214. [ 0.140000] NET: Registered protocol family 1
  215. [ 0.148000] gptu: totally 6 16-bit timers/counters
  216. [ 0.152000] gptu: misc_register on minor 63
  217. [ 0.156000] gptu: succeeded to request irq 126
  218. [ 0.160000] gptu: succeeded to request irq 127
  219. [ 0.164000] gptu: succeeded to request irq 128
  220. [ 0.168000] gptu: succeeded to request irq 129
  221. [ 0.172000] gptu: succeeded to request irq 130
  222. [ 0.180000] gptu: succeeded to request irq 131
  223. [ 0.188000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  224. [ 0.192000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  225. [ 0.204000] msgmni has been set to 120
  226. [ 0.208000] io scheduler noop registered
  227. [ 0.212000] io scheduler deadline registered (default)
  228. [ 0.216000] ltq_asc.0: ttyLTQ0 at MMIO 0x1e100400 (irq = 104) is a ltq_asc
  229. [ 0.224000] ltq_asc.1: ttyLTQ1 at MMIO 0x1e100c00 (irq = 112) is a ltq_asc
  230. [ 0.232000] console [ttyLTQ1] enabled, bootconsole disabled
  231. [ 0.232000] console [ttyLTQ1] enabled, bootconsole disabled
  232. [ 0.248000] ltq_nor: error registering platform driver
  233. [ 0.256000] ltq_etop: Error registering platfom driver!
  234. [ 0.260000] TCP westwood registered
  235. [ 0.264000] NET: Registered protocol family 17
  236. [ 0.268000] Bridge firewalling registered
  237. [ 0.272000] 8021q: 802.1Q VLAN Support v1.8
  238. [ 0.280000] VFS: Cannot open root device "(null)" or unknown-block(0,0)
  239. [ 0.284000] Please append a correct "root=" boot option; here are the available partitions:
  240. [ 0.292000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!