U-Boot SPL 2016.03-00001-ge8ed693 (Sep 22 2016 - 09:56:25)
fix header magic:0xee3355aa,name:A335BNLT00C02814BBBK9055�</@�0@��,version:00C02814BBBK9055�</@�0@��
Trying to boot from MMC
bad magic


U-Boot 2016.03-00001-ge8ed693 (Sep 22 2016 - 09:56:25 -0700)

       Watchdog enabled
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Error - No Valid Environment Area found
*** Warning - bad CRC, using default environment

fix header magic:0xee3355aa,name:A335BNLT00C02814BBBK9055\��@��,version:00C02814BBBK9055\��@��
Net:   <ethaddr> not set. Validating first E-fuse MAC
fix header magic:0xee3355aa,name:A335BNLT00C02814BBBK9055,version:00C02814BBBK9055
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
Card did not respond to voltage select!
Card did not respond to voltage select!
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
switch to partitions #0, OK
mmc1(part 0) is current device
SD/MMC found on device 1
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
1179 bytes read in 4 ms (287.1 KiB/s)
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
822 bytes read in 30 ms (26.4 KiB/s)
debug: [/boot/vmlinuz-4.1.6-bone15] ...
6936360 bytes read in 413 ms (16 MiB/s)
debug: [/boot/initrd.img-4.1.6-bone15] ...
4244339 bytes read in 260 ms (15.6 MiB/s)
debug: [/boot/dtbs/4.1.6-bone15/am335x-boneblack-replicape.dtb] ...
55204 bytes read in 66 ms (816.4 KiB/s)
debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait coherent_pool=1M quiet init=/lib/systemd/systemd consoleblank=0 fbcon=rotate:1 omap_wdt.nowayout=0] ...
debug: [bootz 0x82000000 0x88080000:40c373 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x69d728 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Using Device Tree in place at 88000000, end 880107a3

Starting kernel ...

[    3.168464] omap_voltage_late_init: Voltage driver support not added
[    3.177628] cpu cpu0: cpu0 clock notifier not ready, retry
[    3.282685] bone_capemgr bone_capemgr: Cannot read cell (ret=-110)
[    3.288914] bone_capemgr bone_capemgr: Failed to scan baseboard eeprom
Loading, please wait...
/dev/mmcblk0p2: recovering journal
/dev/mmcblk0p2: clean, 74219/230144 files, 470371/918784 blocks
[    8.966956] libphy: PHY 4a101000.mdio:01 not found
[    8.971786] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    9.655620] dummy 0-0034: Error -121 writing to cec:0xff
[    9.739315] tda998x 0-0070: set_page 000a err -121
[    9.805436] tda998x 0-0070: set_page 000a err -121
[    9.878544] tda998x 0-0070: set_page 0001 err -121
[    9.935323] tda998x 0-0070: set_page 0001 err -121
[   10.041383] tda998x 0-0070: set_page 0200 err -121
[   10.094878] tda998x 0-0070: set_page 0201 err -121
[   10.173079] tda998x 0-0070: set_page 0202 err -121
[   10.224397] tda998x 0-0070: set_page 0203 err -121
[   10.303706] tda998x 0-0070: set_page 0204 err -121
[   10.358508] tda998x 0-0070: set_page 0205 err -121
[   10.424742] tda998x 0-0070: set_page 020e err -121
[   10.469896] tda998x 0-0070: set_page 0211 err -121
[   10.516459] tda998x 0-0070: set_page 0207 err -121
[   10.531522] tda998x 0-0070: set_page 0208 err -121
[   10.578488] tda998x 0-0070: set_page 0209 err -121
[   10.638924] tda998x 0-0070: set_page 020a err -121
[   10.677367] tda998x 0-0070: set_page 0206 err -121
[   10.694879] tda998x 0-0070: set_page 0027 err -121
[   10.737844] tda998x 0-0070: set_page 0000 err -121
[   10.773670] tda998x 0-0070: set_page 0002 err -121
[   10.780281] tilcdc 4830e000.lcdc: no encoders/connectors found
[   10.849185] tilcdc 4830e000.lcdc: failed to initialize mode setting

Debian GNU/Linux 8 kamikaze ttyS0

Kamikaze Debian Jessie Image 2016-02-16

Support/FAQ: http://wiki.thing-printer.com/index.php?title=Kamikaze

default username:password is [debian:temppwd]

The IP Address for usb0 is: 192.168.7.2
kamikaze login: root
Password:
Last login: Thu Sep 22 19:43:25 UTC 2016 on ttyS0
Linux kamikaze 4.1.6-bone15 #1 Tue Aug 18 12:45:47 UTC 2015 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@kamikaze:~#