Advertisement
Guest User

Untitled

a guest
Mar 20th, 2014
119
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.33 KB | None | 0 0
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 3.14.0-rc6-65736-gb12c7848 (root@cubieez) (gcc version 4.6.3 (Debian 4.6.3-14) ) #12 SMP Thu Mar 20 19:10:02 CET 2014
  3. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c7387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine model: Cubietech Cubietruck
  6. [ 0.000000] cma: CMA: reserved 16 MiB at 6e800000
  7. [ 0.000000] Memory policy: Data cache writealloc
  8. [ 0.000000] On node 0 totalpages: 524288
  9. [ 0.000000] free_area_init_node: node 0, pgdat c07f35c0, node_mem_map ed7f2000
  10. [ 0.000000] Normal zone: 1520 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 194560 pages, LIFO batch:31
  13. [ 0.000000] HighMem zone: 2576 pages used for memmap
  14. [ 0.000000] HighMem zone: 329728 pages, LIFO batch:31
  15. [ 0.000000] PERCPU: Embedded 5 pages/cpu @ed7ce000 s8128 r0 d12352 u32768
  16. [ 0.000000] pcpu-alloc: s8128 r0 d12352 u32768 alloc=8*4096
  17. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  18. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
  19. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait loglevel=5
  20. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  21. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  22. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [ 0.000000] Memory: 2055004K/2097152K available (6060K kernel code, 304K rwdata, 1472K rodata, 267K init, 268K bss, 42148K reserved, 1318912K highmem)
  24. [ 0.000000] Virtual kernel memory layout:
  25. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  26. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  27. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  28. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  29. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  30. [ 0.000000] .text : 0xc0008000 - 0xc0763320 (7533 kB)
  31. [ 0.000000] .init : 0xc0764000 - 0xc07a6fc0 ( 268 kB)
  32. [ 0.000000] .data : 0xc07a8000 - 0xc07f42c0 ( 305 kB)
  33. [ 0.000000] .bss : 0xc07f42c8 - 0xc0837548 ( 269 kB)
  34. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  35. [ 0.000000] Hierarchical RCU implementation.
  36. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  37. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  38. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  39. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
  40. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  41. [ 0.000015] Switching to timer-based delay loop
  42. [ 0.000425] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  43. [ 0.000589] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
  44. [ 0.000768] Console: colour dummy device 80x30
  45. [ 0.000803] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  46. [ 0.000819] pid_max: default: 32768 minimum: 301
  47. [ 0.000983] Mount-cache hash table entries: 512
  48. [ 0.005777] CPU: Testing write buffer coherency: ok
  49. [ 0.006131] /cpus/cpu@0 missing clock-frequency property
  50. [ 0.006151] /cpus/cpu@1 missing clock-frequency property
  51. [ 0.006163] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  52. [ 0.006188] Setting up static identity map for 0x405bf6e0 - 0x405bf738
  53. [ 0.007344] CPU1: failed to boot: -38
  54. [ 0.007379] Brought up 1 CPUs
  55. [ 0.007387] SMP: Total of 1 processors activated.
  56. [ 0.007393] CPU: All CPU(s) started in SVC mode.
  57. [ 0.008102] devtmpfs: initialized
  58. [ 0.011913] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  59. [ 0.012193] pinctrl core: initialized pinctrl subsystem
  60. [ 0.012553] regulator-dummy: no parameters
  61. [ 0.013512] NET: Registered protocol family 16
  62. [ 0.014624] DMA: preallocated 256 KiB pool for atomic coherent allocations
  63. [ 0.015120] cpuidle: using governor ladder
  64. [ 0.015130] cpuidle: using governor menu
  65. [ 0.018755] No ATAGs?
  66. [ 0.018878] Serial: AMBA PL011 UART driver
  67. [ 0.025782] bio: create slab <bio-0> at 0
  68. [ 0.026635] reg-fixed-voltage ahci-5v.2: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
  69. [ 0.026658] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral
  70. [ 0.026683] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  71. [ 0.026696] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral
  72. [ 0.026716] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  73. [ 0.026728] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral
  74. [ 0.026748] reg-fixed-voltage vmmc3.6: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
  75. [ 0.026760] platform vmmc3.6: Driver reg-fixed-voltage requests probe deferral
  76. [ 0.028115] SCSI subsystem initialized
  77. [ 0.028339] libata version 3.00 loaded.
  78. [ 0.028616] usbcore: registered new interface driver usbfs
  79. [ 0.028664] usbcore: registered new interface driver hub
  80. [ 0.028779] usbcore: registered new device driver usb
  81. [ 0.029063] Linux video capture interface: v2.00
  82. [ 0.029103] pps_core: LinuxPPS API ver. 1 registered
  83. [ 0.029109] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  84. [ 0.029132] PTP clock support registered
  85. [ 0.029182] EDAC MC: Ver: 3.0.0
  86. [ 0.029734] Advanced Linux Sound Architecture Driver Initialized.
  87. [ 0.030803] cfg80211: Calling CRDA to update world regulatory domain
  88. [ 0.031259] Switched to clocksource arch_sys_counter
  89. [ 0.031563] FS-Cache: Loaded
  90. [ 0.040487] NET: Registered protocol family 2
  91. [ 0.041039] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  92. [ 0.041120] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  93. [ 0.041241] TCP: Hash tables configured (established 8192 bind 8192)
  94. [ 0.041353] TCP: reno registered
  95. [ 0.041368] UDP hash table entries: 512 (order: 2, 16384 bytes)
  96. [ 0.041425] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  97. [ 0.041685] NET: Registered protocol family 1
  98. [ 0.042060] RPC: Registered named UNIX socket transport module.
  99. [ 0.042071] RPC: Registered udp transport module.
  100. [ 0.042077] RPC: Registered tcp transport module.
  101. [ 0.042086] RPC: Registered tcp NFSv4.1 backchannel transport module.
  102. [ 0.042440] kvm [1]: HYP mode not available
  103. [ 0.043274] futex hash table entries: 512 (order: 3, 32768 bytes)
  104. [ 0.044059] bounce pool size: 64 pages
  105. [ 0.052855] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  106. [ 0.053764] NFS: Registering the id_resolver key type
  107. [ 0.053832] Key type id_resolver registered
  108. [ 0.053839] Key type id_legacy registered
  109. [ 0.054446] msgmni has been set to 1469
  110. [ 0.055874] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  111. [ 0.055892] io scheduler noop registered
  112. [ 0.055899] io scheduler deadline registered
  113. [ 0.056066] io scheduler cfq registered (default)
  114. [ 0.056303] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
  115. [ 0.058633] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  116. [ 0.114300] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  117. [ 0.136485] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
  118. [ 0.180499] console [ttyS0] enabled
  119. [ 0.201747] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 35, base_baud = 1500000) is a U6_16550A
  120. [ 0.202330] STMicroelectronics ASC driver initialized
  121. [ 0.202607] serial: Freescale lpuart driver
  122. [ 0.202751] [drm] Initialized drm 1.1.0 20060810
  123. [ 0.206645] loop: module loaded
  124. [ 0.207420] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
  125. [ 0.209864] stmmaceth 1c50000.ethernet: no regulator found
  126. [ 0.209937] stmmaceth 1c50000.ethernet: no reset control found
  127. [ 0.209947] Ring mode enabled
  128. [ 0.209954] No HW DMA feature register supported
  129. [ 0.209959] Normal descriptors
  130. [ 0.209966] TX Checksum insertion supported
  131. [ 0.213555] libphy: stmmac: probed
  132. [ 0.213572] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
  133. [ 0.213580] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01)
  134. [ 0.213708] usbcore: registered new interface driver rt2800usb
  135. [ 0.213825] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  136. [ 0.213875] usbcore: registered new interface driver pegasus
  137. [ 0.213922] usbcore: registered new interface driver asix
  138. [ 0.213965] usbcore: registered new interface driver ax88179_178a
  139. [ 0.214022] usbcore: registered new interface driver cdc_ether
  140. [ 0.214069] usbcore: registered new interface driver r815x
  141. [ 0.214113] usbcore: registered new interface driver smsc75xx
  142. [ 0.214156] usbcore: registered new interface driver smsc95xx
  143. [ 0.214199] usbcore: registered new interface driver net1080
  144. [ 0.214242] usbcore: registered new interface driver cdc_subset
  145. [ 0.214284] usbcore: registered new interface driver zaurus
  146. [ 0.214366] usbcore: registered new interface driver cdc_ncm
  147. [ 0.214394] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  148. [ 0.214401] ehci-platform: EHCI generic platform driver
  149. [ 0.214525] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  150. [ 0.214584] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  151. [ 0.214904] usbcore: registered new interface driver usb-storage
  152. [ 0.215949] mousedev: PS/2 mouse device common for all mice
  153. [ 0.216805] i2c /dev entries driver
  154. [ 0.219098] gspca_main: v2.14.0 registered
  155. [ 0.222557] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  156. [ 0.222709] sdhci: Secure Digital Host Controller Interface driver
  157. [ 0.222716] sdhci: Copyright(c) Pierre Ossman
  158. [ 0.223595] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
  159. [ 0.223773] sunxi-mmc 1c0f000.mmc: base:0xf006a000 irq:64
  160. [ 0.224199] platform 1c12000.mmc: Driver sunxi-mmc requests probe deferral
  161. [ 0.224326] sdhci-pltfm: SDHCI platform and OF driver helper
  162. [ 0.226189] ledtrig-cpu: registered to indicate activity on CPUs
  163. [ 0.226362] usbcore: registered new interface driver usbhid
  164. [ 0.226369] usbhid: USB HID core driver
  165. [ 0.227599] TCP: cubic registered
  166. [ 0.228267] NET: Registered protocol family 10
  167. [ 0.229099] mip6: Mobile IPv6
  168. [ 0.229116] sit: IPv6 over IPv4 tunneling driver
  169. [ 0.230455] NET: Registered protocol family 17
  170. [ 0.231125] rfkill_gpio rfkill_bt.8: bt device registered.
  171. [ 0.231331] Key type dns_resolver registered
  172. [ 0.231489] Registering SWP/SWPB emulation handler
  173. [ 0.232154] regulator-dummy: disabling
  174. [ 0.232743] ahci-5v: 5000 mV
  175. [ 0.233066] usb1-vbus: 5000 mV
  176. [ 0.233374] usb2-vbus: 5000 mV
  177. [ 0.233705] vmmc3: 3300 mV
  178. [ 0.301272] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
  179. [ 0.301294] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
  180. [ 0.307174] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  181. [ 0.307191] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
  182. [ 0.308151] scsi0 : ahci_platform
  183. [ 0.308510] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  184. [ 0.308855] ehci-platform 1c14000.usb: EHCI Host Controller
  185. [ 0.308896] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  186. [ 0.309058] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
  187. [ 0.321278] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  188. [ 0.322239] hub 1-0:1.0: USB hub found
  189. [ 0.322286] hub 1-0:1.0: 1 port detected
  190. [ 0.322892] ehci-platform 1c1c000.usb: EHCI Host Controller
  191. [ 0.322938] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  192. [ 0.323105] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
  193. [ 0.341282] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  194. [ 0.342082] hub 2-0:1.0: USB hub found
  195. [ 0.342142] hub 2-0:1.0: 1 port detected
  196. [ 0.343417] sunxi-mmc 1c12000.mmc: base:0xf0078000 irq:67
  197. [ 0.343628] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  198. [ 0.353503] ALSA device list:
  199. [ 0.353529] No soundcards found.
  200. [ 0.568224] mmc0: host does not support reading read-only switch. assuming write-enable.
  201. [ 0.741895] mmc0: new high speed SDHC card at address b368
  202. [ 0.742459] mmcblk0: mmc0:b368 NCard 14.9 GiB
  203. [ 0.743857] mmcblk0: p1 p2
  204. [ 0.947130] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
  205. [ 0.961986] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  206. [ 0.968963] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  207. [ 0.975946] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  208. [ 0.984116] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  209. [ 1.169921] mmc1: new high speed SDIO card at address 0001
  210. [ 1.171921] brcmfmac_sdio mmc1:0001:2: Direct firmware load failed with error -2
  211. [ 1.179314] brcmfmac_sdio mmc1:0001:2: Falling back to user helper
  212. [ 3.291279] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  213. [ 3.293991] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OC64G, max UDMA/133
  214. [ 3.294005] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  215. [ 3.295220] ata1.00: configured for UDMA/133
  216. [ 3.295658] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
  217. [ 3.296735] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  218. [ 3.296966] sd 0:0:0:0: [sda] Write Protect is off
  219. [ 3.296978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  220. [ 3.297077] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  221. [ 3.315676] sda: sda1
  222. [ 3.316819] sd 0:0:0:0: [sda] Attached SCSI disk
  223. [ 3.335029] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  224. [ 3.335094] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  225. [ 3.343478] devtmpfs: mounted
  226. [ 3.343798] Freeing unused kernel memory: 264K (c0764000 - c07a6000)
  227. [ 34.457199] udevd[239]: starting version 175
  228. [ 35.057951] brcmfmac: brcmf_sdio_get_fw: fail to request firmware brcm/brcmfmac43362-sdio.bin (-2)
  229. [ 35.134942] brcmfmac: brcmf_bus_start: brcmf_sdbrcm_bus_init failed -2
  230. [ 35.141579] brcmfmac: brcmf_sdio_probe: dongle is not responding
  231. [ 35.252396] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19...
  232. [ 37.863993] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  233. [ 38.169787] random: nonblocking pool is initialized
  234. [ 40.098647] Adding 65532k swap on /swap/swapfile. Priority:-1 extents:6 across:1638400k SS
  235. [ 41.059114] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  236. [ 42.479230] eth0: device MAC address 06:98:f6:8f:5e:7d
  237. [ 42.622503] No MAC Management Counters available
  238. [ 46.611543] libphy: stmmac-0:00 - Link is Up - 1000/Full
  239. [ 66.090763] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  240. [ 197.610922] libphy: stmmac-0:00 - Link is Down
  241. [ 201.610924] libphy: stmmac-0:00 - Link is Up - 100/Full
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement