API tools faq
paste
Advertisement
embed3d

pvr_sgx544MP1_debug_log_12/13/17

embed3d
Dec 13th, 2017
729
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 319.48 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. rtc[1] value = 0x00010000
  4. rtc[2] value = 0x00020000
  5. rtc[3] value = 0x00030000
  6. DRAM DRIVE INFO: V1.0
  7. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  8. DRAM normal_mode value: 00000001
  9. DRAM CLK =672 MHZ
  10. PMU: AXP81X
  11. ddr voltage = 1200 mv
  12. using ic A83T
  13. using axp AXP813
  14. DRAM zq value: 00003bfb
  15. dram size =2048
  16. card boot number = 0
  17. card no is 0
  18. sdcard 0 line count 0
  19. [mmc]: mmc driver ver 2014-8-11 15:06:39
  20. [mmc]: ***Try SD card 0***
  21. [mmc]: SD/MMC Card: 4bit, capacity: 7546MB
  22. [mmc]: vendor: Man 00744a60 Snr 56500d33
  23. [mmc]: product:
  24. [mmc]: revision: 0.2
  25. [mmc]: ***SD/MMC 0 init OK!!!***
  26. sdcard 0 init ok
  27. ERROR! NOT find the head of uboot.
  28. The size of uboot is 000d8000.
  29. sum=ce3ec68c
  30. src_sum=ce3ec68c
  31. Succeed in loading uboot from sdmmc flash.
  32. Ready to disable icache.
  33. Jump to secend Boot.
  34. normal mode[ 0.297]
  35.  
  36. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  37.  
  38. [ 0.306]version: 2.1.0
  39. normal mode
  40. [ 0.386]pmbus: normal or secure os
  41. ready
  42. [ 0.390]PMU: AXP81X
  43. [ 0.393]PMU: AXP81X found
  44. bat_vol=147, ratio=100
  45. [ 0.398]PMU: dcdc2 900
  46. [ 0.401]PMU: pll1 1008 Mhz
  47. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  48. set power on vol to default
  49. dcdc1_vol = 3300, onoff=1
  50. dcdc2_vol = 900, onoff=1
  51. dcdc3_vol = 900, onoff=1
  52. dcdc4_vol = 900, onoff=1
  53. dcdc6_vol = 900, onoff=1
  54. aldo1_vol = 1800, onoff=0
  55. aldo2_vol = 1800, onoff=1
  56. aldo3_vol = 3000, onoff=1
  57. eldo2_vol = 1800, onoff=0
  58. dldo1_vol = 3300, onoff=0
  59. dldo2_vol = 3300, onoff=0
  60. dldo3_vol = 2500, onoff=1
  61. dldo4_vol = 2800, onoff=0
  62. fldo2_vol = 900, onoff=1
  63. gpio0_vol = 3300, onoff=1
  64. gpio1_vol = 3300, onoff=1
  65. find power_sply to end
  66. supply=dcdc1
  67. axp=axp81x, supply=dcdc1, vol=3300
  68. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  69. supply=dcdc1
  70. axp=axp81x, supply=dcdc1, vol=3300
  71. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  72. supply=dldo3
  73. axp=axp81x, supply=dldo3, vol=1800
  74. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  75. supply=dcdc1
  76. axp=axp81x, supply=dcdc1, vol=3300
  77. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  78. supply=dcdc1
  79. axp=axp81x, supply=dcdc1, vol=3300
  80. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  81. supply=dcdc1
  82. axp=axp81x, supply=dcdc1, vol=3300
  83. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  84. supply=dcdc1
  85. axp=axp81x, supply=dcdc1, vol=3300
  86. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  87. supply=aldo3
  88. axp=axp81x, supply=aldo3, vol=3000
  89. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  90. config gpio bias voltage finish
  91. vbus exist
  92. no battery, limit to dc
  93. ac100 reg 0x00 = 0x101
  94. ac100 reg 0xd0 = 0x0
  95. ac100 reg 0xd1 = 0x0
  96. __446__:(board.c:power_source_init)
  97. [AXP81X]:[00]=[C5]
  98. [AXP81X]:[01]=[10]
  99. [AXP81X]:[02]=[02]
  100. [AXP81X]:[03]=[51]
  101. [AXP81X]:[04]=[00]
  102. [AXP81X]:[05]=[00]
  103. [AXP81X]:[06]=[00]
  104. [AXP81X]:[07]=[00]
  105. [AXP81X]:[08]=[00]
  106. [AXP81X]:[09]=[00]
  107. [AXP81X]:[0A]=[00]
  108. [AXP81X]:[0B]=[00]
  109. [AXP81X]:[0C]=[00]
  110. [AXP81X]:[0D]=[00]
  111. [AXP81X]:[0E]=[00]
  112. [AXP81X]:[0F]=[00]
  113. [AXP81X]:[10]=[3F]
  114. [AXP81X]:[11]=[00]
  115. [AXP81X]:[12]=[20]
  116. [AXP81X]:[13]=[C8]
  117. [AXP81X]:[14]=[08]
  118. [AXP81X]:[15]=[1A]
  119. [AXP81X]:[16]=[1A]
  120. [AXP81X]:[17]=[0B]
  121. [AXP81X]:[18]=[15]
  122. [AXP81X]:[19]=[00]
  123. [AXP81X]:[1A]=[16]
  124. [AXP81X]:[1B]=[00]
  125. [AXP81X]:[1C]=[0B]
  126. [AXP81X]:[1D]=[04]
  127. [AXP81X]:[1E]=[00]
  128. [AXP81X]:[1F]=[00]
  129. [AXP81X]:[20]=[11]
  130. [AXP81X]:[21]=[A8]
  131. [AXP81X]:[22]=[A8]
  132. [AXP81X]:[23]=[A8]
  133. [AXP81X]:[24]=[A4]
  134. [AXP81X]:[25]=[9E]
  135. [AXP81X]:[26]=[A8]
  136. [AXP81X]:[27]=[FC]
  137. [AXP81X]:[28]=[0B]
  138. [AXP81X]:[29]=[0B]
  139. [AXP81X]:[2A]=[17]
  140. [AXP81X]:[2B]=[00]
  141. [AXP81X]:[2C]=[00]
  142. [AXP81X]:[2D]=[30]
  143. [AXP81X]:[2E]=[40]
  144. [AXP81X]:[2F]=[00]
  145. [AXP81X]:[30]=[03]
  146. [AXP81X]:[31]=[03]
  147. [AXP81X]:[32]=[43]
  148. [AXP81X]:[33]=[C8]
  149. [AXP81X]:[34]=[45]
  150. [AXP81X]:[35]=[18]
  151. [AXP81X]:[36]=[59]
  152. [AXP81X]:[37]=[00]
  153. [AXP81X]:[38]=[A5]
  154. [AXP81X]:[39]=[1F]
  155. [AXP81X]:[3A]=[80]
  156. [AXP81X]:[3B]=[08]
  157. [AXP81X]:[3C]=[FC]
  158. [AXP81X]:[3D]=[16]
  159. [AXP81X]:[3E]=[7C]
  160. BPI-M3:[AXP81X]:[3A]=[80]
  161. BPI-M3: [AXP81X]: set [3A]=[85]
  162. BPI-M3:[AXP81X]: read [3A]=[85]
  163. BPI-M3: [AXP81X]: set [35]=[83]
  164. BPI-M3:[AXP81X]: read [35]=[83]
  165. BPI-M3:[AXP81X]: do_reset
  166. resetting ...
  167. set next mode 14
  168. drv_disp_exit
  169. [ 1.795][mmc]: MMC Device 2 not found
  170. [ 1.799][mmc]: mmc not find,so not exit
  171. HELLO! BOOT0 is starting!
  172. boot0 version : 4.0.0
  173. rtc[1] value = 0x00010000
  174. rtc[2] value = 0x00020000
  175. rtc[3] value = 0x00030000
  176. DRAM DRIVE INFO: V1.0
  177. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  178. DRAM normal_mode value: 00000001
  179. DRAM CLK =672 MHZ
  180. PMU: AXP81X
  181. ddr voltage = 1200 mv
  182. using ic A83T
  183. using axp AXP813
  184. DRAM zq value: 00003bfb
  185. dram size =2048
  186. card boot number = 0
  187. card no is 0
  188. sdcard 0 line count 0
  189. [mmc]: mmc driver ver 2014-8-11 15:06:39
  190. [mmc]: ***Try SD card 0***
  191. [mmc]: SD/MMC Card: 4bit, capacity: 7546MB
  192. [mmc]: vendor: Man 00744a60 Snr 56500d33
  193. [mmc]: product:
  194. [mmc]: revision: 0.2
  195. [mmc]: ***SD/MMC 0 init OK!!!***
  196. sdcard 0 init ok
  197. ERROR! NOT find the head of uboot.
  198. The size of uboot is 000d8000.
  199. sum=ce3ec68c
  200. src_sum=ce3ec68c
  201. Succeed in loading uboot from sdmmc flash.
  202. Ready to disable icache.
  203. Jump to secend Boot.
  204. normal mode[ 0.297]
  205.  
  206. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  207.  
  208. [ 0.306]version: 2.1.0
  209. normal mode
  210. [ 0.386]pmbus: normal or secure os
  211. ready
  212. [ 0.390]PMU: AXP81X
  213. [ 0.393]PMU: AXP81X found
  214. bat_vol=0, ratio=100
  215. [ 0.398]PMU: dcdc2 900
  216. [ 0.400]PMU: pll1 1008 Mhz
  217. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  218. set power on vol to default
  219. dcdc1_vol = 3300, onoff=1
  220. dcdc2_vol = 900, onoff=1
  221. dcdc3_vol = 900, onoff=1
  222. dcdc4_vol = 900, onoff=1
  223. dcdc6_vol = 900, onoff=1
  224. aldo1_vol = 1800, onoff=0
  225. aldo2_vol = 1800, onoff=1
  226. aldo3_vol = 3000, onoff=1
  227. eldo2_vol = 1800, onoff=0
  228. dldo1_vol = 3300, onoff=0
  229. dldo2_vol = 3300, onoff=0
  230. dldo3_vol = 2500, onoff=1
  231. dldo4_vol = 2800, onoff=0
  232. fldo2_vol = 900, onoff=1
  233. gpio0_vol = 3300, onoff=1
  234. gpio1_vol = 3300, onoff=1
  235. find power_sply to end
  236. supply=dcdc1
  237. axp=axp81x, supply=dcdc1, vol=3300
  238. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  239. supply=dcdc1
  240. axp=axp81x, supply=dcdc1, vol=3300
  241. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  242. supply=dldo3
  243. axp=axp81x, supply=dldo3, vol=1800
  244. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  245. supply=dcdc1
  246. axp=axp81x, supply=dcdc1, vol=3300
  247. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  248. supply=dcdc1
  249. axp=axp81x, supply=dcdc1, vol=3300
  250. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  251. supply=dcdc1
  252. axp=axp81x, supply=dcdc1, vol=3300
  253. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  254. supply=dcdc1
  255. axp=axp81x, supply=dcdc1, vol=3300
  256. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  257. supply=aldo3
  258. axp=axp81x, supply=aldo3, vol=3000
  259. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  260. config gpio bias voltage finish
  261. vbus exist
  262. no battery, limit to dc
  263. ac100 reg 0x00 = 0x101
  264. ac100 reg 0xd0 = 0x0
  265. ac100 reg 0xd1 = 0x0
  266. __446__:(board.c:power_source_init)
  267. [AXP81X]:[00]=[C5]
  268. [AXP81X]:[01]=[10]
  269. [AXP81X]:[02]=[02]
  270. [AXP81X]:[03]=[51]
  271. [AXP81X]:[04]=[00]
  272. [AXP81X]:[05]=[00]
  273. [AXP81X]:[06]=[00]
  274. [AXP81X]:[07]=[00]
  275. [AXP81X]:[08]=[00]
  276. [AXP81X]:[09]=[00]
  277. [AXP81X]:[0A]=[00]
  278. [AXP81X]:[0B]=[00]
  279. [AXP81X]:[0C]=[00]
  280. [AXP81X]:[0D]=[00]
  281. [AXP81X]:[0E]=[00]
  282. [AXP81X]:[0F]=[0E]
  283. [AXP81X]:[10]=[3F]
  284. [AXP81X]:[11]=[00]
  285. [AXP81X]:[12]=[20]
  286. [AXP81X]:[13]=[C8]
  287. [AXP81X]:[14]=[08]
  288. [AXP81X]:[15]=[1A]
  289. [AXP81X]:[16]=[1A]
  290. [AXP81X]:[17]=[0B]
  291. [AXP81X]:[18]=[15]
  292. [AXP81X]:[19]=[00]
  293. [AXP81X]:[1A]=[16]
  294. [AXP81X]:[1B]=[00]
  295. [AXP81X]:[1C]=[0B]
  296. [AXP81X]:[1D]=[04]
  297. [AXP81X]:[1E]=[00]
  298. [AXP81X]:[1F]=[00]
  299. [AXP81X]:[20]=[11]
  300. [AXP81X]:[21]=[A8]
  301. [AXP81X]:[22]=[A8]
  302. [AXP81X]:[23]=[A8]
  303. [AXP81X]:[24]=[A4]
  304. [AXP81X]:[25]=[9E]
  305. [AXP81X]:[26]=[A8]
  306. [AXP81X]:[27]=[FC]
  307. [AXP81X]:[28]=[0B]
  308. [AXP81X]:[29]=[0B]
  309. [AXP81X]:[2A]=[17]
  310. [AXP81X]:[2B]=[00]
  311. [AXP81X]:[2C]=[00]
  312. [AXP81X]:[2D]=[30]
  313. [AXP81X]:[2E]=[40]
  314. [AXP81X]:[2F]=[00]
  315. [AXP81X]:[30]=[03]
  316. [AXP81X]:[31]=[03]
  317. [AXP81X]:[32]=[43]
  318. [AXP81X]:[33]=[C8]
  319. [AXP81X]:[34]=[45]
  320. [AXP81X]:[35]=[83]
  321. [AXP81X]:[36]=[59]
  322. [AXP81X]:[37]=[00]
  323. [AXP81X]:[38]=[A5]
  324. [AXP81X]:[39]=[1F]
  325. [AXP81X]:[3A]=[85]
  326. [AXP81X]:[3B]=[08]
  327. [AXP81X]:[3C]=[FC]
  328. [AXP81X]:[3D]=[16]
  329. [AXP81X]:[3E]=[7C]
  330. BPI-M3:[AXP81X]:[3A]=[85]
  331. limit to 2500mA
  332. fel key old mode
  333. run key detect
  334. no key found
  335. no key input
  336. dram_para_set start
  337. dram_para_set end
  338. [ 0.744]DRAM: 2 GiB
  339. relocation Offset is: 75af7000
  340. user_gpio config
  341. user_gpio ok
  342. gic: normal or no secure os mode
  343. script config pll_de to 504 Mhz
  344. script config pll_video1 to 297 Mhz
  345. Not Found clk pll_video in script
  346. enable power vcc-hdmi-18, ret=0
  347. DRV_DISP_Init end
  348. [ 0.982]boot_disp.output_disp=1
  349. [ 0.986]boot_disp.output_type=3
  350. [ 0.989]boot_disp.output_mode=5
  351. [ 0.992]fetch script data boot_disp.auto_hpd fail
  352. disp1 device type(4) enable
  353. attched ok, mgr1<-->device1, type=4, mode=5----
  354. ready to set mode
  355. workmode = 0
  356. MMC: 0
  357. [ 1.027][mmc]: mmc driver ver 2015-04-13 14:50:00
  358. [ 1.032][mmc]: get sdc_phy_wipe fail.
  359. [ 1.036][mmc]: get sdc0 sdc_erase fail.
  360. [ 1.040][mmc]: get sdc_f_max fail,use default 50000000Hz
  361. [ 1.045][mmc]: get sdc_ex_dly_used fail,use default dly
  362. [ 1.051][mmc]: SUNXI SD/MMC: 0
  363. [ 1.064][mmc]: *Try SD card 0*
  364. [ 1.097][mmc]: CID 0x744a6020 0x20202020 0x256500d 0x33010bc3
  365. [ 1.102][mmc]: mmc clk 50000000
  366. [ 1.106][mmc]: SD/MMC Card: 4bit, capacity: 7546MB
  367. [ 1.110][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  368. [ 1.116][mmc]: ***SD/MMC 0 init OK!!!***
  369. [ 1.120][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  370. [ 1.126][mmc]: secure_feature 0x0
  371. [ 1.129][mmc]: secure_removal_type 0x0
  372. [ 1.133]sunxi flash init ok
  373. [ 1.137][mmc]: MMC Device 2 not found
  374. [ 1.141][mmc]: Can not find mmc dev
  375. [ 1.145][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
  376. sunxi_secstorage_read fail
  377. get secure storage map err
  378. sunxi secure storage is not supported
  379. private partition is not exist
  380. In: serial
  381. Out: serial
  382. Err: serial
  383. --------fastboot partitions--------
  384. -total partitions:6-
  385. -name- -start- -size-
  386. boot-res : 1000000 2000000
  387. env : 3000000 1000000
  388. boot : 4000000 1000000
  389. rootfs : 5000000 20000000
  390. klog : 25000000 1000000
  391. UDISK : 26000000 0
  392. -----------------------------------
  393. base bootcmd=run setargs_nand boot_normal
  394. bootcmd set setargs_mmc
  395. key 0
  396. recovery key high 10, low 8
  397. cant find fstbt value
  398. no misc partition is found
  399. to be run cmd=run setargs_mmc boot_normal
  400. serial is: 00000000000000000000
  401. mount part name boot-res
  402. cant open script.bin, maybe it is not exist
  403. WORK_MODE_BOOT
  404. board_status_probe
  405. [ 1.244]pre sys mode
  406. sunxi_bmp_logo_display
  407. [ 1.365][mmc]: blkcnt should not be 0
  408. [ 1.383]fetch script data boot_disp.output_disp fail
  409. [ 1.388]screen_id =1, screen_width =1280, screen_height =720
  410. [ 1.394]frame buffer address 46400000
  411. [ 1.398]Hit any key to stop autoboot: 3  2  1  0
  412. [ 4.654][mmc]: MMC Device 2 not found
  413.  
  414. ** Invalid boot device **
  415.  
  416. ** Unable to read "bananapi/bpi-m3/linux/uEnv.txt" from mmc 0:1 **
  417. [ 4.671][mmc]: blkcnt should not be 0
  418. Loaded environment from uEnv.txt
  419. Running uenvcmd ...
  420. Banana Pi bpi-m3 chip: a83t Service: linux bpiuser: PVR_SGX_DEBUG
  421. [ 4.985][mmc]: blkcnt should not be 0
  422. ## Booting kernel from Legacy Image at 48000000 ...
  423. Image Name: Linux-3.4.39
  424. Image Type: ARM Linux Kernel Image (uncompressed)
  425. Data Size: 7040976 Bytes = 6.7 MiB
  426. Load Address: 40008000
  427. Entry Point: 40008000
  428. Verifying Checksum ... OK
  429. Loading Kernel Image ... OK
  430. OK
  431. [ 5.116][mmc]: MMC Device 2 not found
  432. [ 5.120][mmc]: mmc not find,so not exit
  433. [ 5.124]
  434. Starting kernel ...
  435.  
  436. [sun8i_fixup]: From boot, get meminfo:
  437. Start: 0x40000000
  438. Size: 2048MB
  439. ion_carveout reserve: 96m 128m
  440. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  441. [ 0.000000] Booting Linux on physical CPU 0
  442. [ 0.000000] Initializing cgroup subsys cpuset
  443. [ 0.000000] Initializing cgroup subsys cpu
  444. [ 0.000000] Linux version 3.4.39 (philipp@ubuntu-14) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #6 SMP PREEMPT Wed Dec 13 21:28:03 CET 2017
  445. [ 0.000000] bootconsole [earlycon0] enabled
  446. [ 0.000000] debug: ignoring loglevel setting.
  447. [ 0.000000] cma: CMA: reserved 128 MiB at b8000000
  448. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  449. [ 0.000000] On node 0 totalpages: 524288
  450. [ 0.000000] free_area_init_node: node 0, pgdat c0f08e40, node_mem_map c0fc7000
  451. [ 0.000000] Normal zone: 1710 pages used for memmap
  452. [ 0.000000] Normal zone: 0 pages reserved
  453. [ 0.000000] Normal zone: 192850 pages, LIFO batch:31
  454. [ 0.000000] HighMem zone: 2898 pages used for memmap
  455. [ 0.000000] HighMem zone: 326830 pages, LIFO batch:31
  456. [ 0.000000] script_init enter!
  457. [ 0.000000] script_init exit!
  458. ------sun8i_smp_init_ops----37-----
  459. [ 0.000000] [mcpm_smp_init_cpus] ncores=8
  460. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c21eb000 s12160 r8192 d12416 u32768
  461. [ 0.000000] pcpu-alloc: s12160 r8192 d12416 u32768 alloc=8*4096
  462. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  463. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  464. [ 0.000000] Kernel command line: earlyprintk=ttyS0,115200 board=bpi-m3 console=ttyS0,115200 root=/dev/mmcblk0p2 ignore_loglevel initcall_debug=1 init=/init disp.screen0_output_type=3 disp.screen0_output_mode=10 disp.screen1_output_type=3 disp.screen1_output_mode=10
  465. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  466. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  467. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  468. [ 0.000000] allocated 4194304 bytes of page_cgroup
  469. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  470. [ 0.000000] Memory: 2048MB = 2048MB total
  471. [ 0.000000] Memory: 1926068k/1926068k available, 171084k reserved, 1187840K highmem
  472. [ 0.000000] Virtual kernel memory layout:
  473. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  474. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  475. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  476. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  477. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  478. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  479. [ 0.000000] .text : 0xc0008000 - 0xc0d5557c (13622 kB)
  480. [ 0.000000] .init : 0xc0d56000 - 0xc0dbcf80 ( 412 kB)
  481. [ 0.000000] .data : 0xc0dbe000 - 0xc0f27018 (1445 kB)
  482. [ 0.000000] .bss : 0xc0f2703c - 0xc0fc6640 ( 638 kB)
  483. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  484. [ 0.000000] Preemptible hierarchical RCU implementation.
  485. [ 0.000000] Additional per-CPU info printed with stalls.
  486. [ 0.000000] NR_IRQS:544
  487. [ 0.000000] Architected local timer running at 24.00MHz.
  488. [ 0.000000] Switching to timer-based delay loop
  489. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  490. [ 0.000000] Console: colour dummy device 80x30
  491. [ 0.014556] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  492. [ 0.022938] pid_max: default: 32768 minimum: 301
  493. [ 0.027946] Mount-cache hash table entries: 512
  494. [ 0.031341] Initializing cgroup subsys cpuacct
  495. [ 0.034500] Initializing cgroup subsys memory
  496. [ 0.038961] Initializing cgroup subsys devices
  497. [ 0.040024] Initializing cgroup subsys freezer
  498. [ 0.044489] Initializing cgroup subsys blkio
  499. [ 0.048844] Initializing cgroup subsys perf_event
  500. [ 0.050119] CPU: Testing write buffer coherency: ok
  501. [ 0.054934] ftrace: allocating 33213 entries in 98 pages
  502. [ 0.100316] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  503. [ 0.100452] calling cpu_suspend_alloc_sp+0x0/0x8c @ 1
  504. [ 0.105642] initcall cpu_suspend_alloc_sp+0x0/0x8c returned 0 after 0 usecs
  505. [ 0.110031] calling init_static_idmap+0x0/0xec @ 1
  506. [ 0.114954] Setting up static identity map for 0x40921370 - 0x409213c8
  507. [ 0.120019] initcall init_static_idmap+0x0/0xec returned 0 after 9765 usecs
  508. [ 0.127016] calling sun8i_mcpm_init+0x0/0x16c @ 1
  509. [ 0.130035] initcall sun8i_mcpm_init+0x0/0x16c returned 0 after 0 usecs
  510. [ 0.136671] calling spawn_ksoftirqd+0x0/0x54 @ 1
  511. [ 0.160040] initcall spawn_ksoftirqd+0x0/0x54 returned 0 after 19531 usecs
  512. [ 0.161370] calling init_workqueues+0x0/0x374 @ 1
  513. [ 0.166611] initcall init_workqueues+0x0/0x374 returned 0 after 0 usecs
  514. [ 0.170042] calling migration_init+0x0/0x70 @ 1
  515. [ 0.174679] initcall migration_init+0x0/0x70 returned 0 after 0 usecs
  516. [ 0.180018] calling cpu_stop_init+0x0/0xd0 @ 1
  517. [ 0.200048] initcall cpu_stop_init+0x0/0xd0 returned 0 after 19531 usecs
  518. [ 0.201204] calling rcu_scheduler_really_started+0x0/0x24 @ 1
  519. [ 0.207098] initcall rcu_scheduler_really_started+0x0/0x24 returned 0 after 0 usecs
  520. [ 0.210017] calling relay_init+0x0/0x20 @ 1
  521. [ 0.214333] initcall relay_init+0x0/0x20 returned 0 after 0 usecs
  522. [ 0.220015] calling tracer_alloc_buffers+0x0/0x1ec @ 1
  523. [ 0.225441] initcall tracer_alloc_buffers+0x0/0x1ec returned 0 after 0 usecs
  524. [ 0.230016] calling init_trace_printk+0x0/0x1c @ 1
  525. [ 0.234939] initcall init_trace_printk+0x0/0x1c returned 0 after 0 usecs
  526. [ 0.240016] calling jump_label_init_module+0x0/0x1c @ 1
  527. [ 0.245373] initcall jump_label_init_module+0x0/0x1c returned 0 after 0 usecs
  528. [ 0.250018] calling mbus_init+0x0/0x54 @ 1
  529. [ 0.254246] initcall mbus_init+0x0/0x54 returned 0 after 0 usecs
  530. [ 0.020000] CPU1: Booted secondary processor
  531. [ 0.020000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  532. [ 0.020000] CPU2: Booted secondary processor
  533. [ 0.020000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  534. [ 0.020000] CPU3: Booted secondary processor
  535. [ 0.020000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  536. [ 0.420093] CPU4: failed to boot: -22
  537. [ 0.470096] CPU5: failed to boot: -22
  538. [ 0.510070] CPU6: failed to boot: -22
  539. [ 0.550089] CPU7: failed to boot: -22
  540. [ 0.550312] Brought up 4 CPUs
  541. [ 0.551240] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  542. [ 0.558287] devtmpfs: initialized
  543. [ 0.567254] calling sram_init+0x0/0xe0 @ 1
  544. [ 0.567306] initcall sram_init+0x0/0xe0 returned 0 after 0 usecs
  545. [ 0.570028] calling ipc_ns_init+0x0/0x20 @ 1
  546. [ 0.574408] initcall ipc_ns_init+0x0/0x20 returned 0 after 0 usecs
  547. [ 0.580016] calling init_mmap_min_addr+0x0/0x2c @ 1
  548. [ 0.585025] initcall init_mmap_min_addr+0x0/0x2c returned 0 after 0 usecs
  549. [ 0.590043] calling init_cpufreq_transition_notifier_list+0x0/0x2c @ 1
  550. [ 0.596697] initcall init_cpufreq_transition_notifier_list+0x0/0x2c returned 0 after 0 usecs
  551. [ 0.600021] calling net_ns_init+0x0/0xf0 @ 1
  552. [ 0.604509] initcall net_ns_init+0x0/0xf0 returned 0 after 0 usecs
  553. [ 0.610316] calling ptrace_break_init+0x0/0x34 @ 1
  554. [ 0.614936] initcall ptrace_break_init+0x0/0x34 returned 0 after 0 usecs
  555. [ 0.620076] calling v6_userpage_init+0x0/0x14 @ 1
  556. [ 0.624851] initcall v6_userpage_init+0x0/0x14 returned 0 after 0 usecs
  557. [ 0.630018] calling register_cpususpend_notifier+0x0/0x1c @ 1
  558. [ 0.635894] initcall register_cpususpend_notifier+0x0/0x1c returned 0 after 0 usecs
  559. [ 0.640023] calling cpu_hotplug_pm_sync_init+0x0/0x20 @ 1
  560. [ 0.645547] initcall cpu_hotplug_pm_sync_init+0x0/0x20 returned 0 after 0 usecs
  561. [ 0.650017] calling alloc_frozen_cpus+0x0/0x14 @ 1
  562. [ 0.654939] initcall alloc_frozen_cpus+0x0/0x14 returned 0 after 0 usecs
  563. [ 0.660016] calling ksysfs_init+0x0/0xa8 @ 1
  564. [ 0.664458] initcall ksysfs_init+0x0/0xa8 returned 0 after 0 usecs
  565. [ 0.670029] calling pm_init+0x0/0x88 @ 1
  566. [ 0.674139] initcall pm_init+0x0/0x88 returned 0 after 0 usecs
  567. [ 0.679963] calling scenelocks_init+0x0/0x90 @ 1
  568. [ 0.680029] initcall scenelocks_init+0x0/0x90 returned 0 after 0 usecs
  569. [ 0.686583] calling init_jiffies_clocksource+0x0/0x1c @ 1
  570. [ 0.690025] initcall init_jiffies_clocksource+0x0/0x1c returned 0 after 0 usecs
  571. [ 0.697368] calling cpu_pm_init+0x0/0x28 @ 1
  572. [ 0.700019] initcall cpu_pm_init+0x0/0x28 returned 0 after 0 usecs
  573. [ 0.706238] calling init_zero_pfn+0x0/0x5c @ 1
  574. [ 0.710024] initcall init_zero_pfn+0x0/0x5c returned 0 after 0 usecs
  575. [ 0.716411] calling fsnotify_init+0x0/0x2c @ 1
  576. [ 0.720034] initcall fsnotify_init+0x0/0x2c returned 0 after 0 usecs
  577. [ 0.726411] calling filelock_init+0x0/0x48 @ 1
  578. [ 0.730047] initcall filelock_init+0x0/0x48 returned 0 after 0 usecs
  579. [ 0.736411] calling init_misc_binfmt+0x0/0x38 @ 1
  580. [ 0.740025] initcall init_misc_binfmt+0x0/0x38 returned 0 after 0 usecs
  581. [ 0.746670] calling init_script_binfmt+0x0/0x24 @ 1
  582. [ 0.750018] initcall init_script_binfmt+0x0/0x24 returned 0 after 0 usecs
  583. [ 0.756844] calling init_elf_binfmt+0x0/0x24 @ 1
  584. [ 0.760018] initcall init_elf_binfmt+0x0/0x24 returned 0 after 0 usecs
  585. [ 0.766583] calling debugfs_init+0x0/0x6c @ 1
  586. [ 0.770026] initcall debugfs_init+0x0/0x6c returned 0 after 0 usecs
  587. [ 0.776324] calling securityfs_init+0x0/0x64 @ 1
  588. [ 0.780026] initcall securityfs_init+0x0/0x64 returned 0 after 0 usecs
  589. [ 0.786584] calling random32_init+0x0/0xdc @ 1
  590. [ 0.790020] initcall random32_init+0x0/0xdc returned 0 after 0 usecs
  591. [ 0.796410] calling pinctrl_init+0x0/0xd4 @ 1
  592. [ 0.800011] pinctrl core: initialized pinctrl subsystem
  593. [ 0.805417] initcall pinctrl_init+0x0/0xd4 returned 0 after 0 usecs
  594. [ 0.810018] calling regulator_init+0x0/0x88 @ 1
  595. [ 0.815015] initcall regulator_init+0x0/0x88 returned 0 after 0 usecs
  596. [ 0.820021] calling cma_init_reserved_areas+0x0/0x2bc @ 1
  597. [ 0.830565] initcall cma_init_reserved_areas+0x0/0x2bc returned 0 after 9765 usecs
  598. [ 0.833130] calling cpufreq_core_init+0x0/0xf8 @ 1
  599. [ 0.838108] initcall cpufreq_core_init+0x0/0xf8 returned 0 after 0 usecs
  600. [ 0.840030] calling sock_init+0x0/0x9c @ 1
  601. [ 0.844552] initcall sock_init+0x0/0x9c returned 0 after 0 usecs
  602. [ 0.850025] calling net_inuse_init+0x0/0x2c @ 1
  603. [ 0.854696] initcall net_inuse_init+0x0/0x2c returned 0 after 0 usecs
  604. [ 0.860018] calling netpoll_init+0x0/0x30 @ 1
  605. [ 0.864505] initcall netpoll_init+0x0/0x30 returned 0 after 0 usecs
  606. [ 0.870016] calling netlink_proto_init+0x0/0x1ec @ 1
  607. [ 0.875127] NET: Registered protocol family 16
  608. [ 0.879664] initcall netlink_proto_init+0x0/0x1ec returned 0 after 0 usecs
  609. [ 0.880357] calling atomic_pool_init+0x0/0x120 @ 1
  610. [ 0.903898] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  611. [ 0.905329] initcall atomic_pool_init+0x0/0x120 returned 0 after 29296 usecs
  612. [ 0.910022] calling script_sysfs_init+0x0/0x7c @ 1
  613. [ 0.914999] script_sysfs_init success
  614. [ 0.918667] initcall script_sysfs_init+0x0/0x7c returned 0 after 0 usecs
  615. [ 0.930019] calling sunxi_dump_init+0x0/0x5c @ 1
  616. [ 0.934793] sunxi_dump_init success
  617. [ 0.938321] initcall sunxi_dump_init+0x0/0x5c returned 0 after 9765 usecs
  618. [ 0.940017] calling bdi_class_init+0x0/0x58 @ 1
  619. [ 0.944779] initcall bdi_class_init+0x0/0x58 returned 0 after 0 usecs
  620. [ 0.950020] calling kobject_uevent_init+0x0/0x28 @ 1
  621. [ 0.955186] initcall kobject_uevent_init+0x0/0x28 returned 0 after 0 usecs
  622. [ 0.970019] calling sunxi_pinctrl_init+0x0/0x88 @ 1
  623. [ 0.976066] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  624. [ 0.981821] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  625. [ 0.986626] initcall sunxi_pinctrl_init+0x0/0x88 returned 0 after 19531 usecs
  626. [ 0.990023] calling axp_pinctrl_init+0x0/0x60 @ 1
  627. [ 0.995167] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  628. [ 1.000193] initcall axp_pinctrl_init+0x0/0x60 returned 0 after 0 usecs
  629. [ 1.006672] calling gpiolib_sysfs_init+0x0/0x98 @ 1
  630. [ 1.020243] initcall gpiolib_sysfs_init+0x0/0x98 returned 0 after 0 usecs
  631. [ 1.026848] calling backlight_class_init+0x0/0x78 @ 1
  632. [ 1.030040] initcall backlight_class_init+0x0/0x78 returned 0 after 0 usecs
  633. [ 1.037019] calling tty_class_init+0x0/0x44 @ 1
  634. [ 1.040034] initcall tty_class_init+0x0/0x44 returned 0 after 0 usecs
  635. [ 1.046501] calling vtconsole_class_init+0x0/0xf0 @ 1
  636. [ 1.050121] initcall vtconsole_class_init+0x0/0xf0 returned 0 after 0 usecs
  637. [ 1.057023] calling wakeup_sources_debugfs_init+0x0/0x4c @ 1
  638. [ 1.060034] initcall wakeup_sources_debugfs_init+0x0/0x4c returned 0 after 0 usecs
  639. [ 1.067627] calling regmap_initcall+0x0/0x18 @ 1
  640. [ 1.080030] initcall regmap_initcall+0x0/0x18 returned 0 after 0 usecs
  641. [ 1.086588] calling spi_init+0x0/0xa8 @ 1
  642. [ 1.090074] initcall spi_init+0x0/0xa8 returned 0 after 0 usecs
  643. [ 1.095981] calling i2c_init+0x0/0x7c @ 1
  644. [ 1.100085] initcall i2c_init+0x0/0x7c returned 0 after 0 usecs
  645. [ 1.106304] calling gate_vma_init+0x0/0x4c @ 1
  646. [ 1.110019] initcall gate_vma_init+0x0/0x4c returned 0 after 0 usecs
  647. [ 1.116412] calling customize_machine+0x0/0x30 @ 1
  648. [ 1.120104] initcall customize_machine+0x0/0x30 returned 0 after 0 usecs
  649. [ 1.126760] calling init_atags_procfs+0x0/0xf0 @ 1
  650. [ 1.130037] initcall init_atags_procfs+0x0/0xf0 returned 0 after 0 usecs
  651. [ 1.136760] calling arch_hw_breakpoint_init+0x0/0x214 @ 1
  652. [ 1.140040] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  653. [ 1.148058] hw-breakpoint: maximum watchpoint size is 8 bytes.
  654. [ 1.160023] initcall arch_hw_breakpoint_init+0x0/0x214 returned 0 after 19531 usecs
  655. [ 1.167714] calling exceptions_init+0x0/0x9c @ 1
  656. [ 1.170017] initcall exceptions_init+0x0/0x9c returned 0 after 0 usecs
  657. [ 1.176588] calling dynamic_debug_init+0x0/0x144 @ 1
  658. [ 1.180600] initcall dynamic_debug_init+0x0/0x144 returned 0 after 0 usecs
  659. [ 1.186935] calling dma_bus_init+0x0/0x24 @ 1
  660. [ 1.190048] initcall dma_bus_init+0x0/0x24 returned 0 after 0 usecs
  661. [ 1.196324] calling dma_channel_table_init+0x0/0x108 @ 1
  662. [ 1.200188] initcall dma_channel_table_init+0x0/0x108 returned 0 after 0 usecs
  663. [ 1.207280] calling sunxi_module_init+0x0/0x6c @ 1
  664. [ 1.220139] [sunxi-module]: [sunxi-module.0] probe success
  665. [ 1.225575] initcall sunxi_module_init+0x0/0x6c returned 0 after 0 usecs
  666. [ 1.230018] calling axp81x_board_init+0x0/0xfc @ 1
  667. [ 1.235351] initcall axp81x_board_init+0x0/0xfc returned 0 after 0 usecs
  668. [ 1.240020] calling sunx_clk_default_value+0x0/0x630 @ 1
  669. [ 1.245469] script config pll_video1 to 297 Mhz
  670. [ 1.250020] script config pll_ve to 432 Mhz
  671. [ 1.254245] Not Found clk pll_periph in script
  672. [ 1.258842] script config pll_gpu to 432 Mhz
  673. [ 1.260017] script config pll_hsic to 480 Mhz
  674. [ 1.264423] script config pll_de to 504 Mhz
  675. [ 1.268663] sunxi_default_clk_init
  676. [ 1.280011] try to set pll6ahb1 to 200000000
  677. [ 1.284371] try to set ahb clk source to pll6ahb1
  678. [ 1.289097] set ahb clk source to pll6ahb1
  679. [ 1.290014] try to set ahb1 to 200000000
  680. [ 1.293987] try to set apb1 to 100000000
  681. [ 1.297982] initcall sunx_clk_default_value+0x0/0x630 returned 0 after 48828 usecs
  682. [ 1.300340] calling topology_init+0x0/0x78 @ 1
  683. [ 1.305146] initcall topology_init+0x0/0x78 returned 0 after 0 usecs
  684. [ 1.320024] calling sunxi_debug_init+0x0/0xac @ 1
  685. [ 1.324863] ===fe3o4==== sunxi_root_procfs_attach ret:0
  686. [ 1.330018] initcall sunxi_debug_init+0x0/0xac returned 0 after 9765 usecs
  687. [ 1.336935] calling param_sysfs_init+0x0/0x1a4 @ 1
  688. [ 1.348960] initcall param_sysfs_init+0x0/0x1a4 returned 0 after 9765 usecs
  689. [ 1.350026] calling pm_sysrq_init+0x0/0x2c @ 1
  690. [ 1.354595] initcall pm_sysrq_init+0x0/0x2c returned 0 after 0 usecs
  691. [ 1.360017] calling default_bdi_init+0x0/0xb8 @ 1
  692. [ 1.364927] initcall default_bdi_init+0x0/0xb8 returned 0 after 0 usecs
  693. [ 1.370021] calling init_bio+0x0/0x134 @ 1
  694. [ 1.374301] bio: create slab <bio-0> at 0
  695. [ 1.374301] initcall init_bio+0x0/0x134 returned 0 after 9765 usecs
  696. [ 1.390021] calling fsnotify_notification_init+0x0/0xa4 @ 1
  697. [ 1.395784] initcall fsnotify_notification_init+0x0/0xa4 returned 0 after 0 usecs
  698. [ 1.400017] calling cryptomgr_init+0x0/0x1c @ 1
  699. [ 1.404682] initcall cryptomgr_init+0x0/0x1c returned 0 after 0 usecs
  700. [ 1.410015] calling cryptd_init+0x0/0xdc @ 1
  701. [ 1.414448] initcall cryptd_init+0x0/0xdc returned 0 after 0 usecs
  702. [ 1.420016] calling blk_settings_init+0x0/0x44 @ 1
  703. [ 1.424943] initcall blk_settings_init+0x0/0x44 returned 0 after 0 usecs
  704. [ 1.430014] calling blk_ioc_init+0x0/0x48 @ 1
  705. [ 1.434514] initcall blk_ioc_init+0x0/0x48 returned 0 after 0 usecs
  706. [ 1.440015] calling blk_softirq_init+0x0/0x8c @ 1
  707. [ 1.444859] initcall blk_softirq_init+0x0/0x8c returned 0 after 0 usecs
  708. [ 1.450015] calling blk_iopoll_setup+0x0/0x8c @ 1
  709. [ 1.454858] initcall blk_iopoll_setup+0x0/0x8c returned 0 after 0 usecs
  710. [ 1.470015] calling genhd_device_init+0x0/0x88 @ 1
  711. [ 1.475024] initcall genhd_device_init+0x0/0x88 returned 0 after 0 usecs
  712. [ 1.480019] calling blk_dev_integrity_init+0x0/0x48 @ 1
  713. [ 1.485380] initcall blk_dev_integrity_init+0x0/0x48 returned 0 after 0 usecs
  714. [ 1.490016] calling gpiolib_debugfs_init+0x0/0x40 @ 1
  715. [ 1.495221] initcall gpiolib_debugfs_init+0x0/0x40 returned 0 after 0 usecs
  716. [ 1.500016] calling arisc_init+0x0/0x118 @ 1
  717. [ 1.504418] [ARISC] :sunxi-arisc driver v1.70
  718. [ 1.519674] [ARISC] :arisc version: [v0.1.25.3]
  719. [ 1.519722] [sunxi-module]: arisc register success
  720. [ 1.530431] sunxi_get_soc_bin: slow chip
  721. [ 1.534405] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  722. [ 0.020000] CPU4: Booted secondary processor
  723. [ 0.020000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  724. [ 0.020000] CPU5: Booted secondary processor
  725. [ 0.020000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  726. [ 0.020000] CPU6: Booted secondary processor
  727. [ 0.020000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  728. [ 0.020000] CPU7: Booted secondary processor
  729. [ 0.020000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  730. [ 1.560827] initcall arisc_init+0x0/0x118 returned 0 after 48828 usecs
  731. [ 1.600074] calling pwm_debugfs_init+0x0/0x40 @ 1
  732. [ 1.604887] initcall pwm_debugfs_init+0x0/0x40 returned 0 after 0 usecs
  733. [ 1.610019] calling fbmem_init+0x0/0xb8 @ 1
  734. [ 1.614403] initcall fbmem_init+0x0/0xb8 returned 0 after 0 usecs
  735. [ 1.620241] calling sunxi_dma_init+0x0/0x28 @ 1
  736. [ 1.625856] initcall sunxi_dma_init+0x0/0x28 returned 0 after 0 usecs
  737. [ 1.640032] calling misc_init+0x0/0xcc @ 1
  738. [ 1.644280] initcall misc_init+0x0/0xcc returned 0 after 0 usecs
  739. [ 1.650017] calling sunxi_ion_init+0x0/0x58 @ 1
  740. [ 1.654875] initcall sunxi_ion_init+0x0/0x58 returned 0 after 0 usecs
  741. [ 1.660024] calling cn_init+0x0/0xb4 @ 1
  742. [ 1.664104] initcall cn_init+0x0/0xb4 returned 0 after 0 usecs
  743. [ 1.669966] calling ac100_i2c_init+0x0/0x48 @ 1
  744. [ 1.670058] initcall ac100_i2c_init+0x0/0x48 returned 0 after 0 usecs
  745. [ 1.676500] calling init_scsi+0x0/0x90 @ 1
  746. [ 1.680326] SCSI subsystem initialized
  747. [ 1.683817] initcall init_scsi+0x0/0x90 returned 0 after 9765 usecs
  748. [ 1.690020] calling ata_init+0x0/0x338 @ 1
  749. [ 1.700094] libata version 3.00 loaded.
  750. [ 1.703774] initcall ata_init+0x0/0x338 returned 0 after 0 usecs
  751. [ 1.710024] calling phy_init+0x0/0x38 @ 1
  752. [ 1.714251] initcall phy_init+0x0/0x38 returned 0 after 0 usecs
  753. [ 1.720016] calling usb_init+0x0/0x178 @ 1
  754. [ 1.724433] usbcore: registered new interface driver usbfs
  755. [ 1.729862] usbcore: registered new interface driver hub
  756. [ 1.730066] usbcore: registered new device driver usb
  757. [ 1.735000] initcall usb_init+0x0/0x178 returned 0 after 19531 usecs
  758. [ 1.740018] calling usb_udc_init+0x0/0x60 @ 1
  759. [ 1.744528] initcall usb_udc_init+0x0/0x60 returned 0 after 0 usecs
  760. [ 1.750017] calling serio_init+0x0/0x40 @ 1
  761. [ 1.754377] initcall serio_init+0x0/0x40 returned 0 after 0 usecs
  762. [ 1.760016] calling input_init+0x0/0x12c @ 1
  763. [ 1.764461] initcall input_init+0x0/0x12c returned 0 after 0 usecs
  764. [ 1.780022] calling rtc_init+0x0/0x7c @ 1
  765. [ 1.784193] initcall rtc_init+0x0/0x7c returned 0 after 0 usecs
  766. [ 1.790016] calling sunxi_i2c_adap_init+0x0/0x338 @ 1
  767. [ 1.795207] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  768. [ 1.800015] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  769. [ 1.805720] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  770. [ 1.811576] initcall sunxi_i2c_adap_init+0x0/0x338 returned 0 after 19531 usecs
  771. [ 1.817368] calling media_devnode_init+0x0/0x94 @ 1
  772. [ 1.820016] Linux media interface: v0.10
  773. [ 1.824034] initcall media_devnode_init+0x0/0x94 returned 0 after 0 usecs
  774. [ 1.830017] calling videodev_init+0x0/0x90 @ 1
  775. [ 1.834589] Linux video capture interface: v2.00
  776. [ 1.839295] initcall videodev_init+0x0/0x90 returned 0 after 0 usecs
  777. [ 1.850017] calling power_supply_class_init+0x0/0x50 @ 1
  778. [ 1.855482] initcall power_supply_class_init+0x0/0x50 returned 0 after 0 usecs
  779. [ 1.860016] calling axp_mfd_init+0x0/0x58 @ 1
  780. [ 1.864508] initcall axp_mfd_init+0x0/0x58 returned 0 after 0 usecs
  781. [ 1.870015] calling axp81x_board_device_init+0x0/0x38 @ 1
  782. [ 1.882384] initcall axp81x_board_device_init+0x0/0x38 returned 0 after 0 usecs
  783. [ 1.886787] calling axp_battery_init+0x0/0x24 @ 1
  784. [ 1.890160] BPI-M3: tmp [00]
  785. [ 1.892525] BPI-M3: set PMIC AC 4000mA
  786. [ 1.896350] BPI-M3: set PMIC AC 4000mA
  787. [ 1.900919] initcall axp_battery_init+0x0/0x24 returned 0 after 9765 usecs
  788. [ 1.902672] calling axp_regulator_init+0x0/0x1c @ 1
  789. [ 1.910329] initcall axp_regulator_init+0x0/0x1c returned 0 after 0 usecs
  790. [ 1.911451] calling hwmon_init+0x0/0x50 @ 1
  791. [ 1.920047] initcall hwmon_init+0x0/0x50 returned 0 after 0 usecs
  792. [ 1.926143] calling mmc_init+0x0/0x8c @ 1
  793. [ 1.930162] initcall mmc_init+0x0/0x8c returned 0 after 0 usecs
  794. [ 1.935976] calling leds_init+0x0/0x60 @ 1
  795. [ 1.940039] initcall leds_init+0x0/0x60 returned 0 after 0 usecs
  796. [ 1.946063] calling init_soundcore+0x0/0x44 @ 1
  797. [ 1.950037] initcall init_soundcore+0x0/0x44 returned 0 after 0 usecs
  798. [ 1.956497] calling alsa_sound_init+0x0/0xb0 @ 1
  799. [ 1.960061] Advanced Linux Sound Architecture Driver Version 1.0.25.
  800. [ 1.966411] initcall alsa_sound_init+0x0/0xb0 returned 0 after 0 usecs
  801. [ 1.970018] calling proto_init+0x0/0x1c @ 1
  802. [ 1.974344] initcall proto_init+0x0/0x1c returned 0 after 0 usecs
  803. [ 1.980017] calling net_dev_init+0x0/0x1d8 @ 1
  804. [ 1.985140] initcall net_dev_init+0x0/0x1d8 returned 0 after 0 usecs
  805. [ 1.990020] calling neigh_init+0x0/0xac @ 1
  806. [ 1.994330] initcall neigh_init+0x0/0xac returned 0 after 0 usecs
  807. [ 2.000017] calling fib_rules_init+0x0/0xd0 @ 1
  808. [ 2.004681] initcall fib_rules_init+0x0/0xd0 returned 0 after 0 usecs
  809. [ 2.010016] calling pktsched_init+0x0/0x114 @ 1
  810. [ 2.014695] initcall pktsched_init+0x0/0x114 returned 0 after 0 usecs
  811. [ 2.020017] calling tc_filter_init+0x0/0x74 @ 1
  812. [ 2.024679] initcall tc_filter_init+0x0/0x74 returned 0 after 0 usecs
  813. [ 2.030016] calling tc_action_init+0x0/0x74 @ 1
  814. [ 2.034679] initcall tc_action_init+0x0/0x74 returned 0 after 0 usecs
  815. [ 2.040016] calling genl_init+0x0/0x94 @ 1
  816. [ 2.044290] initcall genl_init+0x0/0x94 returned 0 after 0 usecs
  817. [ 2.050016] calling sysfs_ipv4_init+0x0/0x58 @ 1
  818. [ 2.054802] initcall sysfs_ipv4_init+0x0/0x58 returned 0 after 0 usecs
  819. [ 2.060018] calling bt_init+0x0/0x94 @ 1
  820. [ 2.064067] Bluetooth: Core ver 2.16
  821. [ 2.067759] NET: Registered protocol family 31
  822. [ 2.070014] Bluetooth: HCI device and connection manager initialized
  823. [ 2.076407] Bluetooth: HCI socket layer initialized
  824. [ 2.080014] Bluetooth: L2CAP socket layer initialized
  825. [ 2.085129] Bluetooth: SCO socket layer initialized
  826. [ 2.090018] initcall bt_init+0x0/0x94 returned 0 after 29296 usecs
  827. [ 2.096236] calling cfg80211_init+0x0/0xd0 @ 1
  828. [ 2.100302] cfg80211: Calling CRDA to update world regulatory domain
  829. [ 2.106472] initcall cfg80211_init+0x0/0xd0 returned 0 after 0 usecs
  830. [ 2.110019] calling wireless_nlevent_init+0x0/0x1c @ 1
  831. [ 2.115283] initcall wireless_nlevent_init+0x0/0x1c returned 0 after 0 usecs
  832. [ 2.120015] calling rfkill_init+0x0/0x90 @ 1
  833. [ 2.124498] initcall rfkill_init+0x0/0x90 returned 0 after 0 usecs
  834. [ 2.130019] calling net_sysctl_init+0x0/0x50 @ 1
  835. [ 2.134765] initcall net_sysctl_init+0x0/0x50 returned 0 after 0 usecs
  836. [ 2.140028] calling activity_stats_init+0x0/0x50 @ 1
  837. [ 2.145121] initcall activity_stats_init+0x0/0x50 returned 0 after 0 usecs
  838. [ 2.150018] calling sunxi_init_ac100_clocks+0x0/0x21c @ 1
  839. [ 2.155609] initcall sunxi_init_ac100_clocks+0x0/0x21c returned 0 after 0 usecs
  840. [ 2.160356] calling proc_cpu_init+0x0/0x2c @ 1
  841. [ 2.164601] initcall proc_cpu_init+0x0/0x2c returned 0 after 0 usecs
  842. [ 2.170018] calling dma_debug_do_init+0x0/0x14 @ 1
  843. [ 2.174936] initcall dma_debug_do_init+0x0/0x14 returned 0 after 0 usecs
  844. [ 2.180017] calling alignment_init+0x0/0xfc @ 1
  845. [ 2.184698] initcall alignment_init+0x0/0xfc returned 0 after 0 usecs
  846. [ 2.190019] calling clocksource_done_booting+0x0/0x58 @ 1
  847. [ 2.195542] Switching to clocksource arch_sys_counter
  848. [ 2.200125] initcall clocksource_done_booting+0x0/0x58 returned 0 after 9786 usecs
  849. [ 2.207625] calling ftrace_init_debugfs+0x0/0x234 @ 1
  850. [ 2.213007] initcall ftrace_init_debugfs+0x0/0x234 returned 0 after 237 usecs
  851. [ 2.219923] calling tracer_init_debugfs+0x0/0x448 @ 1
  852. [ 2.226064] initcall tracer_init_debugfs+0x0/0x448 returned 0 after 886 usecs
  853. [ 2.232347] calling init_trace_printk_function_export+0x0/0x48 @ 1
  854. [ 2.238658] initcall init_trace_printk_function_export+0x0/0x48 returned 0 after 12 usecs
  855. [ 2.246901] calling event_trace_init+0x0/0x2dc @ 1
  856. [ 2.295979] initcall event_trace_init+0x0/0x2dc returned 0 after 43088 usecs
  857. [ 2.297493] calling init_pipe_fs+0x0/0x54 @ 1
  858. [ 2.302168] initcall init_pipe_fs+0x0/0x54 returned 0 after 110 usecs
  859. [ 2.308495] calling eventpoll_init+0x0/0xd8 @ 1
  860. [ 2.313266] initcall eventpoll_init+0x0/0xd8 returned 0 after 58 usecs
  861. [ 2.319761] calling anon_inode_init+0x0/0x64 @ 1
  862. [ 2.324625] initcall anon_inode_init+0x0/0x64 returned 0 after 67 usecs
  863. [ 2.331228] calling fscache_init+0x0/0x240 @ 1
  864. [ 2.335899] FS-Cache: Loaded
  865. [ 2.338744] initcall fscache_init+0x0/0x240 returned 0 after 2877 usecs
  866. [ 2.345444] calling cachefiles_init+0x0/0xa8 @ 1
  867. [ 2.350519] CacheFiles: Loaded
  868. [ 2.353303] initcall cachefiles_init+0x0/0xa8 returned 0 after 3025 usecs
  869. [ 2.360179] calling blk_scsi_ioctl_init+0x0/0xe4 @ 1
  870. [ 2.365263] initcall blk_scsi_ioctl_init+0x0/0xe4 returned 0 after 1 usecs
  871. [ 2.372218] calling chr_dev_init+0x0/0xdc @ 1
  872. [ 2.389329] initcall chr_dev_init+0x0/0xdc returned 0 after 12322 usecs
  873. [ 2.390467] calling firmware_class_init+0x0/0x24 @ 1
  874. [ 2.395543] initcall firmware_class_init+0x0/0x24 returned 0 after 28 usecs
  875. [ 2.402575] calling sunxi_hci_init+0x0/0x188 @ 1
  876. [ 2.407727] axp81x_dcdc1: Failed to create debugfs directory
  877. [ 2.413230] initcall sunxi_hci_init+0x0/0x188 returned 0 after 5789 usecs
  878. [ 2.419865] calling usb_manager_init+0x0/0x6a0 @ 1
  879. [ 2.425282] initcall usb_manager_init+0x0/0x6a0 returned 0 after 437 usecs
  880. [ 2.431770] calling udc_init+0x0/0xa0 @ 1
  881. [ 2.436208] initcall udc_init+0x0/0xa0 returned 0 after 298 usecs
  882. [ 2.442082] calling thermal_init+0x0/0x74 @ 1
  883. [ 2.446623] initcall thermal_init+0x0/0x74 returned 0 after 61 usecs
  884. [ 2.452999] calling thermal_gov_step_wise_init+0x0/0x1c @ 1
  885. [ 2.458695] initcall thermal_gov_step_wise_init+0x0/0x1c returned 0 after 2 usecs
  886. [ 2.466255] calling cpufreq_gov_performance_init+0x0/0x1c @ 1
  887. [ 2.472151] initcall cpufreq_gov_performance_init+0x0/0x1c returned 0 after 3 usecs
  888. [ 2.479838] calling cpufreq_gov_dbs_init+0x0/0x1c @ 1
  889. [ 2.485063] initcall cpufreq_gov_dbs_init+0x0/0x1c returned 0 after 1 usecs
  890. [ 2.492082] calling sysctl_core_init+0x0/0x3c @ 1
  891. [ 2.496991] initcall sysctl_core_init+0x0/0x3c returned 0 after 75 usecs
  892. [ 2.503696] calling inet_init+0x0/0x2bc @ 1
  893. [ 2.508160] NET: Registered protocol family 2
  894. [ 2.512802] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  895. [ 2.520423] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  896. [ 2.529452] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  897. [ 2.535344] TCP: Hash tables configured (established 131072 bind 65536)
  898. [ 2.540439] TCP: reno registered
  899. [ 2.543716] UDP hash table entries: 512 (order: 2, 16384 bytes)
  900. [ 2.549728] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  901. [ 2.556553] initcall inet_init+0x0/0x2bc returned 0 after 47404 usecs
  902. [ 2.562638] calling af_unix_init+0x0/0x5c @ 1
  903. [ 2.567143] NET: Registered protocol family 1
  904. [ 2.571583] initcall af_unix_init+0x0/0x5c returned 0 after 4363 usecs
  905. [ 2.578118] calling init_sunrpc+0x0/0x6c @ 1
  906. [ 2.582967] RPC: Registered named UNIX socket transport module.
  907. [ 2.588514] RPC: Registered udp transport module.
  908. [ 2.593313] RPC: Registered tcp transport module.
  909. [ 2.598048] RPC: Registered tcp NFSv4.1 backchannel transport module.
  910. [ 2.604577] initcall init_sunrpc+0x0/0x6c returned 0 after 21495 usecs
  911. [ 2.611164] calling populate_rootfs+0x0/0x218 @ 1
  912. [ 2.616251] initcall populate_rootfs+0x0/0x218 returned 0 after 248 usecs
  913. [ 2.623215] calling sched_clock_syscore_init+0x0/0x20 @ 1
  914. [ 2.628387] initcall sched_clock_syscore_init+0x0/0x20 returned 0 after 1 usecs
  915. [ 2.635826] calling timer_init_syscore_ops+0x0/0x20 @ 1
  916. [ 2.641153] initcall timer_init_syscore_ops+0x0/0x20 returned 0 after 1 usecs
  917. [ 2.648319] calling register_pmu_driver+0x0/0x60 @ 1
  918. [ 2.653541] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  919. [ 2.661776] initcall register_pmu_driver+0x0/0x60 returned 0 after 8124 usecs
  920. [ 2.668773] calling aw_pm_init+0x0/0x3c8 @ 1
  921. [ 2.673215] [pm]aw_pm_init!
  922. [ 2.676051] standby_mode = 1.
  923. [ 2.679168] wakeup src cnt is : 2.
  924. [ 2.682751] pmu name: pmu1_para .
  925. [ 2.686106] pmu1_enable = 0x1.
  926. [ 2.689308] pmux_id = 0x7.
  927. [ 2.692194] pmu name: pmu2_para .
  928. [ 2.695549] config_pmux_para: script_parser_fetch err.
  929. [ 2.700870] pmu2_enable = 0x0.
  930. [ 2.704467] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  931. [ 2.710124] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  932. [ 2.715839] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  933. [ 2.721816] after inited: sys_mask config = 0xebd5.
  934. [ 2.726749] dynamic_standby enalbe = 0x0.
  935. [ 2.730962] initcall aw_pm_init+0x0/0x3c8 returned 0 after 56385 usecs
  936. [ 2.737499] calling aw_ex_standby_init+0x0/0x50 @ 1
  937. [ 2.742566] initcall aw_ex_standby_init+0x0/0x50 returned 0 after 15 usecs
  938. [ 2.749458] calling sunxi_reg_init+0x0/0x6c @ 1
  939. [ 2.754157] sunxi_reg_init enter
  940. [ 2.757677] initcall sunxi_reg_init+0x0/0x6c returned 0 after 3430 usecs
  941. [ 2.764222] calling proc_execdomains_init+0x0/0x40 @ 1
  942. [ 2.769497] initcall proc_execdomains_init+0x0/0x40 returned 0 after 16 usecs
  943. [ 2.776697] calling ioresources_init+0x0/0x60 @ 1
  944. [ 2.781561] initcall ioresources_init+0x0/0x60 returned 0 after 12 usecs
  945. [ 2.788285] calling uid_cache_init+0x0/0xa8 @ 1
  946. [ 2.793006] initcall uid_cache_init+0x0/0xa8 returned 0 after 15 usecs
  947. [ 2.799552] calling init_posix_timers+0x0/0x1e0 @ 1
  948. [ 2.804644] initcall init_posix_timers+0x0/0x1e0 returned 0 after 39 usecs
  949. [ 2.811537] calling init_posix_cpu_timers+0x0/0xec @ 1
  950. [ 2.816801] initcall init_posix_cpu_timers+0x0/0xec returned 0 after 1 usecs
  951. [ 2.823929] calling proc_schedstat_init+0x0/0x40 @ 1
  952. [ 2.829028] initcall proc_schedstat_init+0x0/0x40 returned 0 after 8 usecs
  953. [ 2.835975] calling init_sched_debug_procfs+0x0/0x44 @ 1
  954. [ 2.841442] initcall init_sched_debug_procfs+0x0/0x44 returned 0 after 7 usecs
  955. [ 2.848692] calling userscene_lock_init+0x0/0x38 @ 1
  956. [ 2.853823] lock super standby for a83!
  957. [ 2.857707] lookup_scene_lock_name: new scene lock super_standby
  958. [ 2.863789] scene_lock_init name=super_standby
  959. [ 2.868277] scene_lock: super_standby, type 5, count 1
  960. [ 2.873510] initcall userscene_lock_init+0x0/0x38 returned 0 after 19218 usecs
  961. [ 2.880781] calling timekeeping_init_ops+0x0/0x20 @ 1
  962. [ 2.885961] initcall timekeeping_init_ops+0x0/0x20 returned 0 after 1 usecs
  963. [ 2.893001] calling init_clocksource_sysfs+0x0/0x5c @ 1
  964. [ 2.898560] initcall init_clocksource_sysfs+0x0/0x5c returned 0 after 200 usecs
  965. [ 2.905746] calling init_timer_list_procfs+0x0/0x44 @ 1
  966. [ 2.911125] initcall init_timer_list_procfs+0x0/0x44 returned 0 after 8 usecs
  967. [ 2.918285] calling alarmtimer_init+0x0/0x1bc @ 1
  968. [ 2.923388] initcall alarmtimer_init+0x0/0x1bc returned 0 after 208 usecs
  969. [ 2.929986] calling init_tstats_procfs+0x0/0x44 @ 1
  970. [ 2.935052] initcall init_tstats_procfs+0x0/0x44 returned 0 after 9 usecs
  971. [ 2.941882] calling futex_init+0x0/0x80 @ 1
  972. [ 2.946210] initcall futex_init+0x0/0x80 returned 0 after 15 usecs
  973. [ 2.952455] calling proc_modules_init+0x0/0x40 @ 1
  974. [ 2.957381] initcall proc_modules_init+0x0/0x40 returned 0 after 7 usecs
  975. [ 2.964155] calling kallsyms_init+0x0/0x40 @ 1
  976. [ 2.968733] initcall kallsyms_init+0x0/0x40 returned 0 after 6 usecs
  977. [ 2.975162] calling crash_save_vmcoreinfo_init+0x0/0x3b0 @ 1
  978. [ 2.981047] initcall crash_save_vmcoreinfo_init+0x0/0x3b0 returned 0 after 77 usecs
  979. [ 2.988659] calling crash_notes_memory_init+0x0/0x48 @ 1
  980. [ 2.994167] initcall crash_notes_memory_init+0x0/0x48 returned 0 after 22 usecs
  981. [ 3.001510] calling user_namespaces_init+0x0/0x48 @ 1
  982. [ 3.006722] initcall user_namespaces_init+0x0/0x48 returned 0 after 34 usecs
  983. [ 3.013816] calling pid_namespaces_init+0x0/0x58 @ 1
  984. [ 3.018955] initcall pid_namespaces_init+0x0/0x58 returned 0 after 46 usecs
  985. [ 3.025950] calling ikconfig_init+0x0/0x54 @ 1
  986. [ 3.030551] initcall ikconfig_init+0x0/0x54 returned 0 after 8 usecs
  987. [ 3.036932] calling audit_init+0x0/0x138 @ 1
  988. [ 3.041372] audit: initializing netlink socket (disabled)
  989. [ 3.046845] type=2000 audit(3.040:1): initialized
  990. [ 3.051613] initcall audit_init+0x0/0x138 returned 0 after 9994 usecs
  991. [ 3.058080] calling hung_task_init+0x0/0x60 @ 1
  992. [ 3.062952] initcall hung_task_init+0x0/0x60 returned 0 after 163 usecs
  993. [ 3.069433] calling irq_pm_init_ops+0x0/0x20 @ 1
  994. [ 3.074229] initcall irq_pm_init_ops+0x0/0x20 returned 0 after 1 usecs
  995. [ 3.080809] calling utsname_sysctl_init+0x0/0x20 @ 1
  996. [ 3.085922] initcall utsname_sysctl_init+0x0/0x20 returned 0 after 20 usecs
  997. [ 3.092947] calling init_tracepoints+0x0/0x24 @ 1
  998. [ 3.097775] initcall init_tracepoints+0x0/0x24 returned 0 after 1 usecs
  999. [ 3.104467] calling ftrace_mod_cmd_init+0x0/0x1c @ 1
  1000. [ 3.109560] initcall ftrace_mod_cmd_init+0x0/0x1c returned 0 after 1 usecs
  1001. [ 3.116513] calling init_events+0x0/0x70 @ 1
  1002. [ 3.120959] initcall init_events+0x0/0x70 returned 0 after 24 usecs
  1003. [ 3.127237] calling init_function_trace+0x0/0x4c @ 1
  1004. [ 3.132380] initcall init_function_trace+0x0/0x4c returned 0 after 5 usecs
  1005. [ 3.139284] calling init_irqsoff_tracer+0x0/0x20 @ 1
  1006. [ 3.144423] initcall init_irqsoff_tracer+0x0/0x20 returned 0 after 1 usecs
  1007. [ 3.151353] calling init_wakeup_tracer+0x0/0x30 @ 1
  1008. [ 3.156361] initcall init_wakeup_tracer+0x0/0x30 returned 0 after 2 usecs
  1009. [ 3.163226] calling stack_trace_init+0x0/0xc8 @ 1
  1010. [ 3.168103] initcall stack_trace_init+0x0/0xc8 returned 0 after 42 usecs
  1011. [ 3.174842] calling init_graph_trace+0x0/0x4c @ 1
  1012. [ 3.179675] initcall init_graph_trace+0x0/0x4c returned 0 after 3 usecs
  1013. [ 3.186379] calling init_blk_tracer+0x0/0x60 @ 1
  1014. [ 3.191140] initcall init_blk_tracer+0x0/0x60 returned 0 after 4 usecs
  1015. [ 3.197697] calling perf_event_sysfs_init+0x0/0xbc @ 1
  1016. [ 3.203412] initcall perf_event_sysfs_init+0x0/0xbc returned 0 after 393 usecs
  1017. [ 3.210296] calling init_per_zone_wmark_min+0x0/0x9c @ 1
  1018. [ 3.216022] initcall init_per_zone_wmark_min+0x0/0x9c returned 0 after 286 usecs
  1019. [ 3.223211] calling kswapd_init+0x0/0x2c @ 1
  1020. [ 3.227857] initcall kswapd_init+0x0/0x2c returned 0 after 248 usecs
  1021. [ 3.234042] calling extfrag_debug_init+0x0/0x9c @ 1
  1022. [ 3.239092] initcall extfrag_debug_init+0x0/0x9c returned 0 after 50 usecs
  1023. [ 3.245997] calling setup_vmstat+0x0/0xec @ 1
  1024. [ 3.250570] initcall setup_vmstat+0x0/0xec returned 0 after 66 usecs
  1025. [ 3.256891] calling mm_sysfs_init+0x0/0x40 @ 1
  1026. [ 3.261527] initcall mm_sysfs_init+0x0/0x40 returned 0 after 14 usecs
  1027. [ 3.267985] calling proc_vmalloc_init+0x0/0x40 @ 1
  1028. [ 3.272958] initcall proc_vmalloc_init+0x0/0x40 returned 0 after 8 usecs
  1029. [ 3.279685] calling memblock_init_debugfs+0x0/0x84 @ 1
  1030. [ 3.285063] initcall memblock_init_debugfs+0x0/0x84 returned 0 after 63 usecs
  1031. [ 3.292191] calling init_emergency_pool+0x0/0x78 @ 1
  1032. [ 3.297332] highmem bounce pool size: 64 pages
  1033. [ 3.301810] initcall init_emergency_pool+0x0/0x78 returned 0 after 4422 usecs
  1034. [ 3.308978] calling procswaps_init+0x0/0x40 @ 1
  1035. [ 3.313691] initcall procswaps_init+0x0/0x40 returned 0 after 9 usecs
  1036. [ 3.320179] calling ksm_init+0x0/0x15c @ 1
  1037. [ 3.324609] initcall ksm_init+0x0/0x15c returned 0 after 194 usecs
  1038. [ 3.330675] calling slab_proc_init+0x0/0x40 @ 1
  1039. [ 3.335335] initcall slab_proc_init+0x0/0x40 returned 0 after 8 usecs
  1040. [ 3.341849] calling slab_sysfs_init+0x0/0x124 @ 1
  1041. [ 3.354491] initcall slab_sysfs_init+0x0/0x124 returned 0 after 7623 usecs
  1042. [ 3.355821] calling fcntl_init+0x0/0x48 @ 1
  1043. [ 3.360204] initcall fcntl_init+0x0/0x48 returned 0 after 15 usecs
  1044. [ 3.366394] calling proc_filesystems_init+0x0/0x40 @ 1
  1045. [ 3.371720] initcall proc_filesystems_init+0x0/0x40 returned 0 after 12 usecs
  1046. [ 3.378873] calling dio_init+0x0/0x48 @ 1
  1047. [ 3.383076] initcall dio_init+0x0/0x48 returned 0 after 16 usecs
  1048. [ 3.389101] calling fsnotify_mark_init+0x0/0x48 @ 1
  1049. [ 3.394326] initcall fsnotify_mark_init+0x0/0x48 returned 0 after 166 usecs
  1050. [ 3.401175] calling dnotify_init+0x0/0x8c @ 1
  1051. [ 3.405852] initcall dnotify_init+0x0/0x8c returned 0 after 191 usecs
  1052. [ 3.412179] calling inotify_user_setup+0x0/0x80 @ 1
  1053. [ 3.417203] initcall inotify_user_setup+0x0/0x80 returned 0 after 20 usecs
  1054. [ 3.424135] calling fanotify_user_setup+0x0/0x68 @ 1
  1055. [ 3.429248] initcall fanotify_user_setup+0x0/0x68 returned 0 after 18 usecs
  1056. [ 3.436273] calling aio_setup+0x0/0xb8 @ 1
  1057. [ 3.440587] initcall aio_setup+0x0/0xb8 returned 0 after 53 usecs
  1058. [ 3.446647] calling proc_locks_init+0x0/0x40 @ 1
  1059. [ 3.451452] initcall proc_locks_init+0x0/0x40 returned 0 after 12 usecs
  1060. [ 3.458087] calling init_mbcache+0x0/0x20 @ 1
  1061. [ 3.462620] initcall init_mbcache+0x0/0x20 returned 0 after 2 usecs
  1062. [ 3.468920] calling dquot_init+0x0/0x134 @ 1
  1063. [ 3.473357] VFS: Disk quotas dquot_6.5.2
  1064. [ 3.477692] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  1065. [ 3.483942] initcall dquot_init+0x0/0x134 returned 0 after 10331 usecs
  1066. [ 3.490526] calling init_v2_quota_format+0x0/0x30 @ 1
  1067. [ 3.495704] initcall init_v2_quota_format+0x0/0x30 returned 0 after 1 usecs
  1068. [ 3.502744] calling quota_init+0x0/0x34 @ 1
  1069. [ 3.507081] initcall quota_init+0x0/0x34 returned 0 after 25 usecs
  1070. [ 3.513317] calling proc_cmdline_init+0x0/0x40 @ 1
  1071. [ 3.518246] initcall proc_cmdline_init+0x0/0x40 returned 0 after 10 usecs
  1072. [ 3.525103] calling proc_consoles_init+0x0/0x40 @ 1
  1073. [ 3.530136] initcall proc_consoles_init+0x0/0x40 returned 0 after 7 usecs
  1074. [ 3.536954] calling proc_cpuinfo_init+0x0/0x40 @ 1
  1075. [ 3.541922] initcall proc_cpuinfo_init+0x0/0x40 returned 0 after 7 usecs
  1076. [ 3.548654] calling proc_devices_init+0x0/0x40 @ 1
  1077. [ 3.553627] initcall proc_devices_init+0x0/0x40 returned 0 after 7 usecs
  1078. [ 3.560378] calling proc_interrupts_init+0x0/0x40 @ 1
  1079. [ 3.565563] initcall proc_interrupts_init+0x0/0x40 returned 0 after 7 usecs
  1080. [ 3.572597] calling proc_loadavg_init+0x0/0x40 @ 1
  1081. [ 3.577523] initcall proc_loadavg_init+0x0/0x40 returned 0 after 7 usecs
  1082. [ 3.584300] calling proc_meminfo_init+0x0/0x40 @ 1
  1083. [ 3.589223] initcall proc_meminfo_init+0x0/0x40 returned 0 after 7 usecs
  1084. [ 3.595997] calling proc_stat_init+0x0/0x40 @ 1
  1085. [ 3.600685] initcall proc_stat_init+0x0/0x40 returned 0 after 7 usecs
  1086. [ 3.607154] calling proc_uptime_init+0x0/0x40 @ 1
  1087. [ 3.612039] initcall proc_uptime_init+0x0/0x40 returned 0 after 7 usecs
  1088. [ 3.618681] calling proc_version_init+0x0/0x40 @ 1
  1089. [ 3.623652] initcall proc_version_init+0x0/0x40 returned 0 after 7 usecs
  1090. [ 3.630403] calling proc_softirqs_init+0x0/0x40 @ 1
  1091. [ 3.635417] initcall proc_softirqs_init+0x0/0x40 returned 0 after 8 usecs
  1092. [ 3.642277] calling proc_kmsg_init+0x0/0x40 @ 1
  1093. [ 3.646943] initcall proc_kmsg_init+0x0/0x40 returned 0 after 7 usecs
  1094. [ 3.653457] calling proc_page_init+0x0/0x60 @ 1
  1095. [ 3.658130] initcall proc_page_init+0x0/0x60 returned 0 after 13 usecs
  1096. [ 3.664724] calling configfs_init+0x0/0xd0 @ 1
  1097. [ 3.669422] initcall configfs_init+0x0/0xd0 returned 0 after 122 usecs
  1098. [ 3.675906] calling init_devpts_fs+0x0/0x6c @ 1
  1099. [ 3.680699] initcall init_devpts_fs+0x0/0x6c returned 0 after 110 usecs
  1100. [ 3.687235] calling init_reiserfs_fs+0x0/0x88 @ 1
  1101. [ 3.692279] initcall init_reiserfs_fs+0x0/0x88 returned 0 after 160 usecs
  1102. [ 3.698934] calling init_ext3_fs+0x0/0x90 @ 1
  1103. [ 3.703821] initcall init_ext3_fs+0x0/0x90 returned 0 after 332 usecs
  1104. [ 3.709941] calling init_ext2_fs+0x0/0x90 @ 1
  1105. [ 3.714641] initcall init_ext2_fs+0x0/0x90 returned 0 after 161 usecs
  1106. [ 3.720974] calling ext4_init_fs+0x0/0x220 @ 1
  1107. [ 3.726600] initcall ext4_init_fs+0x0/0x220 returned 0 after 1030 usecs
  1108. [ 3.732243] calling journal_init+0x0/0xcc @ 1
  1109. [ 3.737084] initcall journal_init+0x0/0xcc returned 0 after 351 usecs
  1110. [ 3.743247] calling journal_init+0x0/0x128 @ 1
  1111. [ 3.748040] initcall journal_init+0x0/0x128 returned 0 after 218 usecs
  1112. [ 3.754427] calling init_squashfs_fs+0x0/0x90 @ 1
  1113. [ 3.759422] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1114. [ 3.765175] initcall init_squashfs_fs+0x0/0x90 returned 0 after 5778 usecs
  1115. [ 3.772104] calling init_ramfs_fs+0x0/0x1c @ 1
  1116. [ 3.776679] initcall init_ramfs_fs+0x0/0x1c returned 0 after 3 usecs
  1117. [ 3.783110] calling init_fat_fs+0x0/0x68 @ 1
  1118. [ 3.787840] initcall init_fat_fs+0x0/0x68 returned 0 after 321 usecs
  1119. [ 3.793947] calling init_vfat_fs+0x0/0x1c @ 1
  1120. [ 3.798433] initcall init_vfat_fs+0x0/0x1c returned 0 after 4 usecs
  1121. [ 3.804778] calling init_msdos_fs+0x0/0x1c @ 1
  1122. [ 3.809352] initcall init_msdos_fs+0x0/0x1c returned 0 after 3 usecs
  1123. [ 3.815784] calling init_iso9660_fs+0x0/0x98 @ 1
  1124. [ 3.820771] initcall init_iso9660_fs+0x0/0x98 returned 0 after 213 usecs
  1125. [ 3.827288] calling init_hfsplus_fs+0x0/0x78 @ 1
  1126. [ 3.832248] initcall init_hfsplus_fs+0x0/0x78 returned 0 after 161 usecs
  1127. [ 3.838814] calling ecryptfs_init+0x0/0x1dc @ 1
  1128. [ 3.844432] initcall ecryptfs_init+0x0/0x1dc returned 0 after 885 usecs
  1129. [ 3.850200] calling init_nfs_fs+0x0/0x154 @ 1
  1130. [ 3.854672] NFS: Registering the id_resolver key type
  1131. [ 3.860524] initcall init_nfs_fs+0x0/0x154 returned 0 after 5707 usecs
  1132. [ 3.866375] calling init_nfsd+0x0/0x124 @ 1
  1133. [ 3.870738] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  1134. [ 3.877772] initcall init_nfsd+0x0/0x124 returned 0 after 6860 usecs
  1135. [ 3.883569] calling init_nlm+0x0/0x58 @ 1
  1136. [ 3.887722] initcall init_nlm+0x0/0x58 returned 0 after 24 usecs
  1137. [ 3.893786] calling init_nls_cp437+0x0/0x1c @ 1
  1138. [ 3.898444] initcall init_nls_cp437+0x0/0x1c returned 0 after 1 usecs
  1139. [ 3.904964] calling init_nls_cp932+0x0/0x1c @ 1
  1140. [ 3.909623] initcall init_nls_cp932+0x0/0x1c returned 0 after 1 usecs
  1141. [ 3.916144] calling init_nls_euc_jp+0x0/0x58 @ 1
  1142. [ 3.920913] initcall init_nls_euc_jp+0x0/0x58 returned 0 after 2 usecs
  1143. [ 3.927474] calling init_nls_cp936+0x0/0x1c @ 1
  1144. [ 3.932178] initcall init_nls_cp936+0x0/0x1c returned 0 after 1 usecs
  1145. [ 3.938654] calling init_nls_cp949+0x0/0x1c @ 1
  1146. [ 3.943358] initcall init_nls_cp949+0x0/0x1c returned 0 after 0 usecs
  1147. [ 3.949834] calling init_nls_cp950+0x0/0x1c @ 1
  1148. [ 3.954539] initcall init_nls_cp950+0x0/0x1c returned 0 after 1 usecs
  1149. [ 3.961049] calling init_nls_ascii+0x0/0x1c @ 1
  1150. [ 3.965697] initcall init_nls_ascii+0x0/0x1c returned 0 after 1 usecs
  1151. [ 3.972218] calling init_nls_iso8859_1+0x0/0x1c @ 1
  1152. [ 3.977223] initcall init_nls_iso8859_1+0x0/0x1c returned 0 after 0 usecs
  1153. [ 3.984090] calling init_nls_utf8+0x0/0x38 @ 1
  1154. [ 3.988664] initcall init_nls_utf8+0x0/0x38 returned 0 after 2 usecs
  1155. [ 3.995097] calling init_cifs+0x0/0x3c8 @ 1
  1156. [ 4.000124] initcall init_cifs+0x0/0x3c8 returned 0 after 692 usecs
  1157. [ 4.005735] calling init_ntfs_fs+0x0/0x1e8 @ 1
  1158. [ 4.010351] NTFS driver 2.1.30 [Flags: R/W].
  1159. [ 4.014873] initcall init_ntfs_fs+0x0/0x1e8 returned 0 after 4409 usecs
  1160. [ 4.021362] calling init_autofs4_fs+0x0/0x30 @ 1
  1161. [ 4.026311] initcall init_autofs4_fs+0x0/0x30 returned 0 after 201 usecs
  1162. [ 4.032891] calling fuse_init+0x0/0x150 @ 1
  1163. [ 4.037191] fuse init (API version 7.18)
  1164. [ 4.041633] initcall fuse_init+0x0/0x150 returned 0 after 4329 usecs
  1165. [ 4.047594] calling cuse_init+0x0/0xb4 @ 1
  1166. [ 4.052073] initcall cuse_init+0x0/0xb4 returned 0 after 196 usecs
  1167. [ 4.058081] calling init_udf_fs+0x0/0x80 @ 1
  1168. [ 4.062683] initcall init_udf_fs+0x0/0x80 returned 0 after 148 usecs
  1169. [ 4.068914] calling init_jfs_fs+0x0/0x20c @ 1
  1170. [ 4.073768] JFS: nTxBlock = 8192, nTxLock = 65536
  1171. [ 4.090900] initcall init_jfs_fs+0x0/0x20c returned 0 after 17022 usecs
  1172. [ 4.091973] calling init_xfs_fs+0x0/0xb8 @ 1
  1173. [ 4.096388] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
  1174. [ 4.107024] initcall init_xfs_fs+0x0/0xb8 returned 0 after 10378 usecs
  1175. [ 4.111770] calling init_btrfs_fs+0x0/0xb0 @ 1
  1176. [ 4.117651] Btrfs loaded
  1177. [ 4.118928] initcall init_btrfs_fs+0x0/0xb0 returned 0 after 2539 usecs
  1178. [ 4.125628] calling init_ceph+0x0/0x134 @ 1
  1179. [ 4.130171] ceph: loaded (mds proto 32)
  1180. [ 4.133833] initcall init_ceph+0x0/0x134 returned 0 after 3808 usecs
  1181. [ 4.140270] calling aufs_init+0x0/0x200 @ 1
  1182. [ 4.145225] aufs 3.4-20131104
  1183. [ 4.147614] initcall aufs_init+0x0/0x200 returned 0 after 2962 usecs
  1184. [ 4.154053] calling ipc_init+0x0/0x2c @ 1
  1185. [ 4.158200] msgmni has been set to 1441
  1186. [ 4.162136] initcall ipc_init+0x0/0x2c returned 0 after 3857 usecs
  1187. [ 4.168325] calling ipc_sysctl_init+0x0/0x20 @ 1
  1188. [ 4.173154] initcall ipc_sysctl_init+0x0/0x20 returned 0 after 37 usecs
  1189. [ 4.179764] calling init_mqueue_fs+0x0/0xc4 @ 1
  1190. [ 4.184772] initcall init_mqueue_fs+0x0/0xc4 returned 0 after 294 usecs
  1191. [ 4.191146] calling key_proc_init+0x0/0x54 @ 1
  1192. [ 4.195724] initcall key_proc_init+0x0/0x54 returned 0 after 11 usecs
  1193. [ 4.202235] calling crypto_wq_init+0x0/0x4c @ 1
  1194. [ 4.207079] initcall crypto_wq_init+0x0/0x4c returned 0 after 180 usecs
  1195. [ 4.213594] calling crypto_algapi_init+0x0/0x18 @ 1
  1196. [ 4.218612] initcall crypto_algapi_init+0x0/0x18 returned 0 after 18 usecs
  1197. [ 4.225561] calling skcipher_module_init+0x0/0x50 @ 1
  1198. [ 4.230749] initcall skcipher_module_init+0x0/0x50 returned 0 after 0 usecs
  1199. [ 4.237744] calling chainiv_module_init+0x0/0x1c @ 1
  1200. [ 4.242888] initcall chainiv_module_init+0x0/0x1c returned 0 after 7 usecs
  1201. [ 4.249791] calling eseqiv_module_init+0x0/0x1c @ 1
  1202. [ 4.254845] initcall eseqiv_module_init+0x0/0x1c returned 0 after 3 usecs
  1203. [ 4.261728] calling seqiv_module_init+0x0/0x1c @ 1
  1204. [ 4.266609] initcall seqiv_module_init+0x0/0x1c returned 0 after 3 usecs
  1205. [ 4.273388] calling crypto_user_init+0x0/0x54 @ 1
  1206. [ 4.278241] initcall crypto_user_init+0x0/0x54 returned 0 after 21 usecs
  1207. [ 4.285002] calling hmac_module_init+0x0/0x1c @ 1
  1208. [ 4.289836] initcall hmac_module_init+0x0/0x1c returned 0 after 3 usecs
  1209. [ 4.296527] calling vmac_module_init+0x0/0x1c @ 1
  1210. [ 4.301380] initcall vmac_module_init+0x0/0x1c returned 0 after 3 usecs
  1211. [ 4.308031] calling crypto_xcbc_module_init+0x0/0x1c @ 1
  1212. [ 4.313518] initcall crypto_xcbc_module_init+0x0/0x1c returned 0 after 3 usecs
  1213. [ 4.320793] calling crypto_null_mod_init+0x0/0x7c @ 1
  1214. [ 4.326152] alg: No test for cipher_null (cipher_null-generic)
  1215. [ 4.332119] alg: No test for ecb(cipher_null) (ecb-cipher_null)
  1216. [ 4.338040] alg: No test for digest_null (digest_null-generic)
  1217. [ 4.343976] alg: No test for compress_null (compress_null-generic)
  1218. [ 4.350051] initcall crypto_null_mod_init+0x0/0x7c returned 0 after 23509 usecs
  1219. [ 4.357345] calling md4_mod_init+0x0/0x1c @ 1
  1220. [ 4.362286] initcall md4_mod_init+0x0/0x1c returned 0 after 393 usecs
  1221. [ 4.368351] calling md5_mod_init+0x0/0x1c @ 1
  1222. [ 4.373208] initcall md5_mod_init+0x0/0x1c returned 0 after 315 usecs
  1223. [ 4.379358] calling rmd128_mod_init+0x0/0x1c @ 1
  1224. [ 4.384542] initcall rmd128_mod_init+0x0/0x1c returned 0 after 381 usecs
  1225. [ 4.390909] calling rmd160_mod_init+0x0/0x1c @ 1
  1226. [ 4.396074] initcall rmd160_mod_init+0x0/0x1c returned 0 after 409 usecs
  1227. [ 4.402433] calling rmd256_mod_init+0x0/0x1c @ 1
  1228. [ 4.407547] initcall rmd256_mod_init+0x0/0x1c returned 0 after 357 usecs
  1229. [ 4.413960] calling rmd320_mod_init+0x0/0x1c @ 1
  1230. [ 4.419110] initcall rmd320_mod_init+0x0/0x1c returned 0 after 392 usecs
  1231. [ 4.425490] calling sha1_generic_mod_init+0x0/0x1c @ 1
  1232. [ 4.431114] initcall sha1_generic_mod_init+0x0/0x1c returned 0 after 330 usecs
  1233. [ 4.438031] calling sha256_generic_mod_init+0x0/0x44 @ 1
  1234. [ 4.444126] initcall sha256_generic_mod_init+0x0/0x44 returned 0 after 596 usecs
  1235. [ 4.450967] calling sha512_generic_mod_init+0x0/0x44 @ 1
  1236. [ 4.457603] initcall sha512_generic_mod_init+0x0/0x44 returned 0 after 1166 usecs
  1237. [ 4.463969] calling wp512_mod_init+0x0/0x64 @ 1
  1238. [ 4.472453] initcall wp512_mod_init+0x0/0x64 returned 0 after 3734 usecs
  1239. [ 4.475385] calling tgr192_mod_init+0x0/0x64 @ 1
  1240. [ 4.481526] initcall tgr192_mod_init+0x0/0x64 returned 0 after 1312 usecs
  1241. [ 4.486998] calling crypto_ecb_module_init+0x0/0x1c @ 1
  1242. [ 4.492398] initcall crypto_ecb_module_init+0x0/0x1c returned 0 after 3 usecs
  1243. [ 4.499564] calling crypto_cbc_module_init+0x0/0x1c @ 1
  1244. [ 4.504965] initcall crypto_cbc_module_init+0x0/0x1c returned 0 after 3 usecs
  1245. [ 4.512152] calling crypto_pcbc_module_init+0x0/0x1c @ 1
  1246. [ 4.517595] initcall crypto_pcbc_module_init+0x0/0x1c returned 0 after 3 usecs
  1247. [ 4.524890] calling crypto_cts_module_init+0x0/0x1c @ 1
  1248. [ 4.530267] initcall crypto_cts_module_init+0x0/0x1c returned 0 after 3 usecs
  1249. [ 4.537437] calling crypto_module_init+0x0/0x1c @ 1
  1250. [ 4.542490] initcall crypto_module_init+0x0/0x1c returned 0 after 3 usecs
  1251. [ 4.549311] calling crypto_module_init+0x0/0x1c @ 1
  1252. [ 4.554363] initcall crypto_module_init+0x0/0x1c returned 0 after 3 usecs
  1253. [ 4.561203] calling crypto_ctr_module_init+0x0/0x44 @ 1
  1254. [ 4.566565] initcall crypto_ctr_module_init+0x0/0x44 returned 0 after 5 usecs
  1255. [ 4.573770] calling crypto_gcm_module_init+0x0/0xcc @ 1
  1256. [ 4.579137] initcall crypto_gcm_module_init+0x0/0xcc returned 0 after 10 usecs
  1257. [ 4.586427] calling crypto_ccm_module_init+0x0/0x60 @ 1
  1258. [ 4.591808] initcall crypto_ccm_module_init+0x0/0x60 returned 0 after 8 usecs
  1259. [ 4.598971] calling pcrypt_init+0x0/0xb4 @ 1
  1260. [ 4.603803] initcall pcrypt_init+0x0/0xb4 returned 0 after 381 usecs
  1261. [ 4.609805] calling des_generic_mod_init+0x0/0x44 @ 1
  1262. [ 4.615685] initcall des_generic_mod_init+0x0/0x44 returned 0 after 639 usecs
  1263. [ 4.622224] calling fcrypt_mod_init+0x0/0x1c @ 1
  1264. [ 4.627125] alg: No test for fcrypt (fcrypt-generic)
  1265. [ 4.632092] initcall fcrypt_mod_init+0x0/0x1c returned 0 after 5003 usecs
  1266. [ 4.638838] calling blowfish_mod_init+0x0/0x1c @ 1
  1267. [ 4.650097] initcall blowfish_mod_init+0x0/0x1c returned 0 after 6140 usecs
  1268. [ 4.651511] calling twofish_mod_init+0x0/0x1c @ 1
  1269. [ 4.657131] initcall twofish_mod_init+0x0/0x1c returned 0 after 745 usecs
  1270. [ 4.663240] calling serpent_mod_init+0x0/0x44 @ 1
  1271. [ 4.668847] initcall serpent_mod_init+0x0/0x44 returned 0 after 760 usecs
  1272. [ 4.674936] calling aes_init+0x0/0x1c @ 1
  1273. [ 4.679428] initcall aes_init+0x0/0x1c returned 0 after 344 usecs
  1274. [ 4.685247] calling camellia_init+0x0/0x1c @ 1
  1275. [ 4.690237] initcall camellia_init+0x0/0x1c returned 0 after 406 usecs
  1276. [ 4.696405] calling cast5_mod_init+0x0/0x1c @ 1
  1277. [ 4.701433] initcall cast5_mod_init+0x0/0x1c returned 0 after 309 usecs
  1278. [ 4.707758] calling cast6_mod_init+0x0/0x1c @ 1
  1279. [ 4.712839] initcall cast6_mod_init+0x0/0x1c returned 0 after 364 usecs
  1280. [ 4.719111] calling arc4_init+0x0/0x1c @ 1
  1281. [ 4.723765] initcall arc4_init+0x0/0x1c returned 0 after 374 usecs
  1282. [ 4.729598] calling tea_mod_init+0x0/0x64 @ 1
  1283. [ 4.734957] initcall tea_mod_init+0x0/0x64 returned 0 after 808 usecs
  1284. [ 4.740630] calling khazad_mod_init+0x0/0x1c @ 1
  1285. [ 4.745766] initcall khazad_mod_init+0x0/0x1c returned 0 after 382 usecs
  1286. [ 4.752156] calling anubis_mod_init+0x0/0x1c @ 1
  1287. [ 4.757541] initcall anubis_mod_init+0x0/0x1c returned 0 after 625 usecs
  1288. [ 4.763680] calling seed_init+0x0/0x1c @ 1
  1289. [ 4.768227] initcall seed_init+0x0/0x1c returned 0 after 311 usecs
  1290. [ 4.774167] calling salsa20_generic_mod_init+0x0/0x1c @ 1
  1291. [ 4.779889] initcall salsa20_generic_mod_init+0x0/0x1c returned 0 after 189 usecs
  1292. [ 4.787257] calling deflate_mod_init+0x0/0x1c @ 1
  1293. [ 4.793753] initcall deflate_mod_init+0x0/0x1c returned 0 after 1605 usecs
  1294. [ 4.799018] calling zlib_mod_init+0x0/0x1c @ 1
  1295. [ 4.805674] initcall zlib_mod_init+0x0/0x1c returned 0 after 1990 usecs
  1296. [ 4.810307] calling michael_mic_init+0x0/0x1c @ 1
  1297. [ 4.815448] initcall michael_mic_init+0x0/0x1c returned 0 after 299 usecs
  1298. [ 4.822010] calling crc32c_mod_init+0x0/0x1c @ 1
  1299. [ 4.827145] initcall crc32c_mod_init+0x0/0x1c returned 0 after 381 usecs
  1300. [ 4.833537] calling crypto_authenc_module_init+0x0/0x1c @ 1
  1301. [ 4.839237] initcall crypto_authenc_module_init+0x0/0x1c returned 0 after 3 usecs
  1302. [ 4.846792] calling crypto_authenc_esn_module_init+0x0/0x1c @ 1
  1303. [ 4.852862] initcall crypto_authenc_esn_module_init+0x0/0x1c returned 0 after 3 usecs
  1304. [ 4.860746] calling lzo_mod_init+0x0/0x1c @ 1
  1305. [ 4.865548] initcall lzo_mod_init+0x0/0x1c returned 0 after 306 usecs
  1306. [ 4.871757] calling krng_mod_init+0x0/0x1c @ 1
  1307. [ 4.876487] alg: No test for stdrng (krng)
  1308. [ 4.880604] initcall krng_mod_init+0x0/0x1c returned 0 after 4175 usecs
  1309. [ 4.887158] calling prng_mod_init+0x0/0x30 @ 1
  1310. [ 4.967333] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
  1311. [ 4.967760] initcall prng_mod_init+0x0/0x30 returned 0 after 74197 usecs
  1312. [ 4.974507] calling ghash_mod_init+0x0/0x1c @ 1
  1313. [ 4.979502] initcall ghash_mod_init+0x0/0x1c returned 0 after 337 usecs
  1314. [ 4.985852] calling af_alg_init+0x0/0x48 @ 1
  1315. [ 4.990270] NET: Registered protocol family 38
  1316. [ 4.994755] initcall af_alg_init+0x0/0x48 returned 0 after 4380 usecs
  1317. [ 5.001283] calling algif_hash_init+0x0/0x1c @ 1
  1318. [ 5.006024] initcall algif_hash_init+0x0/0x1c returned 0 after 3 usecs
  1319. [ 5.012627] calling algif_skcipher_init+0x0/0x1c @ 1
  1320. [ 5.017723] initcall algif_skcipher_init+0x0/0x1c returned 0 after 2 usecs
  1321. [ 5.024675] calling algif_rng_init+0x0/0x60 @ 1
  1322. [ 5.029337] initcall algif_rng_init+0x0/0x60 returned 0 after 2 usecs
  1323. [ 5.035855] calling asymmetric_key_init+0x0/0x1c @ 1
  1324. [ 5.041012] initcall asymmetric_key_init+0x0/0x1c returned 0 after 5 usecs
  1325. [ 5.047880] calling proc_genhd_init+0x0/0x60 @ 1
  1326. [ 5.052697] initcall proc_genhd_init+0x0/0x60 returned 0 after 26 usecs
  1327. [ 5.059320] calling bsg_init+0x0/0x144 @ 1
  1328. [ 5.063843] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  1329. [ 5.071049] initcall bsg_init+0x0/0x144 returned 0 after 7281 usecs
  1330. [ 5.077347] calling init_cgroup_blkio+0x0/0x1c @ 1
  1331. [ 5.082310] initcall init_cgroup_blkio+0x0/0x1c returned 0 after 2 usecs
  1332. [ 5.089046] calling noop_init+0x0/0x1c @ 1
  1333. [ 5.093312] io scheduler noop registered
  1334. [ 5.097281] initcall noop_init+0x0/0x1c returned 0 after 3875 usecs
  1335. [ 5.103628] calling deadline_init+0x0/0x1c @ 1
  1336. [ 5.108198] io scheduler deadline registered
  1337. [ 5.112556] initcall deadline_init+0x0/0x1c returned 0 after 4251 usecs
  1338. [ 5.119206] calling cfq_init+0x0/0xc0 @ 1
  1339. [ 5.123418] io scheduler cfq registered (default)
  1340. [ 5.128137] initcall cfq_init+0x0/0xc0 returned 0 after 4638 usecs
  1341. [ 5.134395] calling libcrc32c_mod_init+0x0/0x38 @ 1
  1342. [ 5.139413] initcall libcrc32c_mod_init+0x0/0x38 returned 0 after 10 usecs
  1343. [ 5.146356] calling percpu_counter_startup+0x0/0x24 @ 1
  1344. [ 5.151733] initcall percpu_counter_startup+0x0/0x24 returned 0 after 2 usecs
  1345. [ 5.158900] calling audit_classes_init+0x0/0x58 @ 1
  1346. [ 5.163954] initcall audit_classes_init+0x0/0x58 returned 0 after 5 usecs
  1347. [ 5.170795] calling dynamic_debug_init_debugfs+0x0/0x90 @ 1
  1348. [ 5.176532] initcall dynamic_debug_init_debugfs+0x0/0x90 returned 0 after 35 usecs
  1349. [ 5.184145] calling mbus_platform_init+0x0/0x74 @ 1
  1350. [ 5.189602] initcall mbus_platform_init+0x0/0x74 returned 0 after 440 usecs
  1351. [ 5.196202] calling pwm_module_init+0x0/0x108 @ 1
  1352. [ 5.201038] pwm module init!
  1353. [ 5.204478] initcall pwm_module_init+0x0/0x108 returned 0 after 3350 usecs
  1354. [ 5.210933] calling fb_console_init+0x0/0x158 @ 1
  1355. [ 5.215868] initcall fb_console_init+0x0/0x158 returned 0 after 109 usecs
  1356. [ 5.222638] calling genericbl_driver_init+0x0/0x1c @ 1
  1357. [ 5.227960] initcall genericbl_driver_init+0x0/0x1c returned 0 after 68 usecs
  1358. [ 5.235107] calling disp_module_init+0x0/0x134 @ 1
  1359. [ 5.240039] [DISP]disp_module_init
  1360. [ 5.243860] [DISP]parser_disp_init_para: screen0_output_type(3)
  1361. [ 5.249472] [DISP]parser_disp_init_para: screen0_output_mode(10) value(10)
  1362. [ 5.256427] [DISP]parser_disp_init_para: screen1_output_type(3)
  1363. [ 5.262402] [DISP]parser_disp_init_para: screen1_output_mode(10) value(10)
  1364. [ 5.320908] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
  1365. [ 5.358463] Console: switching to colour frame buffer device 240x67
  1366. [ 5.395592] [DISP]disp_module_init finish
  1367. [ 5.397928] initcall disp_module_init+0x0/0x134 returned 0 after 154174 usecs
  1368. [ 5.405144] calling pty_init+0x0/0x3c4 @ 1
  1369. [ 5.490888] initcall pty_init+0x0/0x3c4 returned 0 after 79604 usecs
  1370. [ 5.491704] calling sysrq_init+0x0/0x90 @ 1
  1371. [ 5.496077] initcall sysrq_init+0x0/0x90 returned 0 after 40 usecs
  1372. [ 5.502306] calling xuartps_init+0x0/0x44 @ 1
  1373. [ 5.506922] initcall xuartps_init+0x0/0x44 returned 0 after 135 usecs
  1374. [ 5.513309] calling sunxi_uart_init+0x0/0x310 @ 1
  1375. [ 5.518960] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  1376. [ 5.524306] sw_uart_pm()890 - uart0 clk is already enable
  1377. [ 5.529668] sw_console_sýkVæV6vf†FÖ6{sc+¶£ËÖVsc+#c&{{£sc+FKc+#k
  1378. [ 5.537684] console [ttyS0] enabled, bootconsole disabled
  1379. [ 5.544099] axp81x_dcdc1: Failed to create debugfs directory
  1380. [ 5.555727] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  1381. [ 5.562786] axp81x_dcdc1: Failed to create debugfs directory
  1382. [ 5.569196] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  1383. [ 5.576230] initcall sunxi_uart_init+0x0/0x310 returned 0 after 56726 usecs
  1384. [ 5.584058] calling rand_initialize+0x0/0x3c @ 1
  1385. [ 5.589407] initcall rand_initialize+0x0/0x3c returned 0 after 79 usecs
  1386. [ 5.596838] calling raw_init+0x0/0x144 @ 1
  1387. [ 5.601840] initcall raw_init+0x0/0x144 returned 0 after 287 usecs
  1388. [ 5.608760] calling drm_core_init+0x0/0x144 @ 1
  1389. [ 5.614026] [drm] Initialized drm 1.1.0 20060810
  1390. [ 5.619195] initcall drm_core_init+0x0/0x144 returned 0 after 5112 usecs
  1391. [ 5.626717] calling ion_page_pool_init+0x0/0x14 @ 1
  1392. [ 5.632294] initcall ion_page_pool_init+0x0/0x14 returned 0 after 0 usecs
  1393. [ 5.639893] calling cn_proc_init+0x0/0x44 @ 1
  1394. [ 5.644891] initcall cn_proc_init+0x0/0x44 returned 0 after 6 usecs
  1395. [ 5.651932] calling topology_sysfs_init+0x0/0x78 @ 1
  1396. [ 5.657843] initcall topology_sysfs_init+0x0/0x78 returned 0 after 248 usecs
  1397. [ 5.665761] calling sw_sync_device_init+0x0/0x1c @ 1
  1398. [ 5.671641] initcall sw_sync_device_init+0x0/0x1c returned 0 after 191 usecs
  1399. [ 5.679535] calling brd_init+0x0/0x190 @ 1
  1400. [ 5.693261] brd: module loaded
  1401. [ 5.696693] initcall brd_init+0x0/0x190 returned 0 after 12149 usecs
  1402. [ 5.703843] calling loop_init+0x0/0x12c @ 1
  1403. [ 5.712792] loop: module loaded
  1404. [ 5.716316] initcall loop_init+0x0/0x12c returned 0 after 7506 usecs
  1405. [ 5.723529] calling init_cryptoloop+0x0/0x34 @ 1
  1406. [ 5.728800] initcall init_cryptoloop+0x0/0x34 returned 0 after 0 usecs
  1407. [ 5.736134] calling rf_pm_init+0x0/0x28 @ 1
  1408. [ 5.741165] [rf_pm]: select module num is 10
  1409. [ 5.745943] [rf_pm]: module power1 name vcc-wifi-io
  1410. [ 5.751427] [rf_pm]: failed to fetch module_power1_vol
  1411. [ 5.757178] [rf_pm]: module power2 name
  1412. [ 5.761586] [rf_pm]: failed to fetch module_power2_vol
  1413. [ 5.767334] [rf_pm]: module power3 name
  1414. [ 5.771741] [rf_pm]: failed to fetch module_power3_vol
  1415. [ 5.777496] [rf_pm]: mod has no power_switch gpio
  1416. [ 5.782780] [rf_pm]: mod has no chip_en gpio
  1417. [ 5.787557] [rf_pm]: lpo_use_apclk: ac10032k2
  1418. [ 5.792548] [rf_pm]: get power regulator failed.
  1419. [ 5.797812] [rf_pm]: enable vcc-wifi-io.
  1420. [ 5.802819] [rf_pm]: mod info power switch -1
  1421. [ 5.807788] [rf_pm]: set ac10032k2 32k out
  1422. [ 5.812519] scene_lock_init name=rf_pm
  1423. [ 5.816759] initcall rf_pm_init+0x0/0x28 returned 0 after 74040 usecs
  1424. [ 5.824013] calling wifi_pm_init+0x0/0xe8 @ 1
  1425. [ 5.829256] [wifi_pm]: wifi gpio init is OK !!
  1426. [ 5.834296] initcall wifi_pm_init+0x0/0xe8 returned 0 after 5181 usecs
  1427. [ 5.841630] calling sw_rfkill_init+0x0/0x19c @ 1
  1428. [ 5.846929] [rfkill]: mod has no ls_int gpio
  1429. [ 5.851733] [rfkill]: mod has no pcm_ch gpio
  1430. [ 5.856847] [rfkill]: rfkill set power 0
  1431. [ 5.880095] initcall sw_rfkill_init+0x0/0x19c returned 0 after 32415 usecs
  1432. [ 5.887793] calling iscsi_transport_init+0x0/0x15c @ 1
  1433. [ 5.893678] Loading iSCSI transport class v2.0-870.
  1434. [ 5.899477] initcall iscsi_transport_init+0x0/0x15c returned 0 after 5653 usecs
  1435. [ 5.907693] calling iscsi_sw_tcp_init+0x0/0x58 @ 1
  1436. [ 5.913300] iscsi: registered transport (tcp)
  1437. [ 5.918181] initcall iscsi_sw_tcp_init+0x0/0x58 returned 0 after 4886 usecs
  1438. [ 5.926051] calling init_sd+0x0/0x13c @ 1
  1439. [ 5.930790] initcall init_sd+0x0/0x13c returned 0 after 122 usecs
  1440. [ 5.937611] calling init_sr+0x0/0x4c @ 1
  1441. [ 5.942162] initcall init_sr+0x0/0x4c returned 0 after 34 usecs
  1442. [ 5.948790] calling init_sg+0x0/0x128 @ 1
  1443. [ 5.953484] initcall init_sg+0x0/0x128 returned 0 after 72 usecs
  1444. [ 5.960236] calling ahci_init+0x0/0x24 @ 1
  1445. [ 5.965038] initcall ahci_init+0x0/0x24 returned -19 after 112 usecs
  1446. [ 5.972181] calling mv_init+0x0/0x1c @ 1
  1447. [ 5.976750] initcall mv_init+0x0/0x1c returned 0 after 74 usecs
  1448. [ 5.983404] calling spi_gpio_driver_init+0x0/0x1c @ 1
  1449. [ 5.989245] initcall spi_gpio_driver_init+0x0/0x1c returned 0 after 83 usecs
  1450. [ 5.997162] calling sunxi_spi_init+0x0/0x5ac @ 1
  1451. [ 6.002457] [spi]: Found 1 spi devices in config files
  1452. [ 6.008207] boards_num modalias max_spd_hz bus_num cs mode
  1453. [ 6.016613] 0 spidev 33000000 0 0 3
  1454. [ 6.025464] axp81x_dcdc1: Failed to create debugfs directory
  1455. [ 6.032127] spi spi0: master is unqueued, this is deprecated
  1456. [ 6.038566] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
  1457. [ 6.046918] [spi-0]: driver probe succeed, base f1c68000, irq 97!
  1458. [ 6.053802] initcall sunxi_spi_init+0x0/0x5ac returned 0 after 50147 usecs
  1459. [ 6.061524] calling bonding_init+0x0/0x904 @ 1
  1460. [ 6.066591] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  1461. [ 6.076644] initcall bonding_init+0x0/0x904 returned 0 after 9805 usecs
  1462. [ 6.084095] calling macvlan_init_module+0x0/0x44 @ 1
  1463. [ 6.089759] initcall macvlan_init_module+0x0/0x44 returned 0 after 3 usecs
  1464. [ 6.097482] calling macvtap_init+0x0/0xe0 @ 1
  1465. [ 6.102513] initcall macvtap_init+0x0/0xe0 returned 0 after 35 usecs
  1466. [ 6.109630] calling net_olddevs_init+0x0/0xc8 @ 1
  1467. [ 6.115035] initcall net_olddevs_init+0x0/0xc8 returned 0 after 14 usecs
  1468. [ 6.122606] calling realtek_init+0x0/0x1c @ 1
  1469. [ 6.127621] initcall realtek_init+0x0/0x1c returned 0 after 39 usecs
  1470. [ 6.134760] calling veth_init+0x0/0x1c @ 1
  1471. [ 6.139447] initcall veth_init+0x0/0x1c returned 0 after 1 usecs
  1472. [ 6.146192] calling xgmac_driver_init+0x0/0x1c @ 1
  1473. [ 6.151772] initcall xgmac_driver_init+0x0/0x1c returned 0 after 92 usecs
  1474. [ 6.159370] calling stmmac_driver_init+0x0/0x1c @ 1
  1475. [ 6.165030] initcall stmmac_driver_init+0x0/0x1c returned 0 after 74 usecs
  1476. [ 6.172749] calling geth_init+0x0/0x30 @ 1
  1477. [ 6.178619] initcall geth_init+0x0/0x30 returned 0 after 1154 usecs
  1478. [ 6.185673] calling ppp_init+0x0/0xf0 @ 1
  1479. [ 6.190275] PPP generic driver version 2.4.2
  1480. [ 6.195320] initcall ppp_init+0x0/0xf0 returned 0 after 4922 usecs
  1481. [ 6.202265] calling ppp_async_init+0x0/0x3c @ 1
  1482. [ 6.207434] initcall ppp_async_init+0x0/0x3c returned 0 after 1 usecs
  1483. [ 6.214677] calling bsdcomp_init+0x0/0x34 @ 1
  1484. [ 6.219648] PPP BSD Compression module registered
  1485. [ 6.224938] initcall bsdcomp_init+0x0/0x34 returned 0 after 5162 usecs
  1486. [ 6.232264] calling deflate_init+0x0/0x40 @ 1
  1487. [ 6.237238] PPP Deflate Compression module registered
  1488. [ 6.242915] initcall deflate_init+0x0/0x40 returned 0 after 5540 usecs
  1489. [ 6.250243] calling ppp_mppe_init+0x0/0xe4 @ 1
  1490. [ 6.257168] PPP MPPE Compression module registered
  1491. [ 6.262565] initcall ppp_mppe_init+0x0/0xe4 returned 0 after 7073 usecs
  1492. [ 6.269967] calling ppp_sync_init+0x0/0x3c @ 1
  1493. [ 6.275063] initcall ppp_sync_init+0x0/0x3c returned 0 after 1 usecs
  1494. [ 6.282192] calling pppox_init+0x0/0x1c @ 1
  1495. [ 6.286968] NET: Registered protocol family 24
  1496. [ 6.291961] initcall pppox_init+0x0/0x1c returned 0 after 4873 usecs
  1497. [ 6.299071] calling pppoe_init+0x0/0x8c @ 1
  1498. [ 6.303902] initcall pppoe_init+0x0/0x8c returned 0 after 32 usecs
  1499. [ 6.310843] calling pppolac_init+0x0/0x68 @ 1
  1500. [ 6.315817] initcall pppolac_init+0x0/0x68 returned 0 after 1 usecs
  1501. [ 6.322902] calling pppopns_init+0x0/0x68 @ 1
  1502. [ 6.327877] initcall pppopns_init+0x0/0x68 returned 0 after 1 usecs
  1503. [ 6.334910] calling qf9700_init+0x0/0x28 @ 1
  1504. [ 6.339890] usbcore: registered new interface driver qf9700
  1505. [ 6.346161] initcall qf9700_init+0x0/0x28 returned 0 after 6220 usecs
  1506. [ 6.353396] calling smsc95xx_driver_init+0x0/0x28 @ 1
  1507. [ 6.359209] usbcore: registered new interface driver smsc95xx
  1508. [ 6.365665] initcall smsc95xx_driver_init+0x0/0x28 returned 0 after 6363 usecs
  1509. [ 6.373766] calling usbnet_init+0x0/0x38 @ 1
  1510. [ 6.378677] initcall usbnet_init+0x0/0x38 returned 0 after 33 usecs
  1511. [ 6.385712] calling cdrom_init+0x0/0x2c @ 1
  1512. [ 6.390535] initcall cdrom_init+0x0/0x2c returned 0 after 20 usecs
  1513. [ 6.397452] calling mon_init+0x0/0xf8 @ 1
  1514. [ 6.402346] initcall mon_init+0x0/0xf8 returned 0 after 281 usecs
  1515. [ 6.409169] calling ehci_hcd_init+0x0/0xd8 @ 1
  1516. [ 6.414260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1517. [ 6.441708] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  1518. [ 6.450934] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  1519. [ 6.460396] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  1520. [ 6.480075] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  1521. [ 6.486704] ehci_irq: highspeed device connect
  1522. [ 6.491842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1523. [ 6.499439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1524. [ 6.507546] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  1525. [ 6.515950] usb usb1: Manufacturer: Linux 3.4.39 ehci_hcd
  1526. [ 6.522061] usb usb1: SerialNumber: sunxi-ehci
  1527. [ 6.527698] hub 1-0:1.0: USB hub found
  1528. [ 6.531936] hub 1-0:1.0: 1 port detected
  1529. [ 6.536816] initcall ehci_hcd_init+0x0/0xd8 returned 0 after 119676 usecs
  1530. [ 6.544439] calling ohci_hcd_mod_init+0x0/0xa8 @ 1
  1531. [ 6.549896] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1532. [ 6.576929] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1533. [ 6.585773] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  1534. [ 6.594303] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  1535. [ 6.664129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  1536. [ 6.671753] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1537. [ 6.679837] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1538. [ 6.687847] usb usb2: Manufacturer: Linux 3.4.39 ohci_hcd
  1539. [ 6.693906] usb usb2: SerialNumber: sunxi-ohci
  1540. [ 6.699449] hub 2-0:1.0: USB hub found
  1541. [ 6.703683] hub 2-0:1.0: 1 port detected
  1542. [ 6.708552] initcall ohci_hcd_mod_init+0x0/0xa8 returned 0 after 154930 usecs
  1543. [ 6.716568] calling usb_stor_init+0x0/0x4c @ 1
  1544. [ 6.721693] Initializing USB Mass Storage driver...
  1545. [ 6.727291] usbcore: registered new interface driver usb-storage
  1546. [ 6.734080] USB Mass Storage support registered.
  1547. [ 6.739251] initcall usb_stor_init+0x0/0x4c returned 0 after 17142 usecs
  1548. [ 6.746791] calling alauda_driver_init+0x0/0x28 @ 1
  1549. [ 6.752424] usbcore: registered new interface driver ums-alauda
  1550. [ 6.759050] initcall alauda_driver_init+0x0/0x28 returned 0 after 6521 usecs
  1551. [ 6.766967] calling cypress_driver_init+0x0/0x28 @ 1
  1552. [ 6.772686] usbcore: registered new interface driver ums-cypress
  1553. [ 6.779410] initcall cypress_driver_init+0x0/0x28 returned 0 after 6605 usecs
  1554. [ 6.787421] calling datafab_driver_init+0x0/0x28 @ 1
  1555. [ 6.793138] usbcore: registered new interface driver ums-datafab
  1556. [ 6.799868] initcall datafab_driver_init+0x0/0x28 returned 0 after 6611 usecs
  1557. [ 6.807927] calling ene_ub6250_driver_init+0x0/0x28 @ 1
  1558. [ 6.813942] usbcore: registered new interface driver ums_eneub6250
  1559. [ 6.820892] initcall ene_ub6250_driver_init+0x0/0x28 returned 0 after 6826 usecs
  1560. [ 6.829168] calling freecom_driver_init+0x0/0x28 @ 1
  1561. [ 6.834883] usbcore: registered new interface driver ums-freecom
  1562. [ 6.841630] initcall freecom_driver_init+0x0/0x28 returned 0 after 6627 usecs
  1563. [ 6.849619] calling isd200_driver_init+0x0/0x28 @ 1
  1564. [ 6.850118] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  1565. [ 6.862778] usbcore: registered new interface driver ums-isd200
  1566. [ 6.869409] initcall isd200_driver_init+0x0/0x28 returned 0 after 6526 usecs
  1567. [ 6.877328] calling jumpshot_driver_init+0x0/0x28 @ 1
  1568. [ 6.883166] usbcore: registered new interface driver ums-jumpshot
  1569. [ 6.889987] initcall jumpshot_driver_init+0x0/0x28 returned 0 after 6715 usecs
  1570. [ 6.898095] calling karma_driver_init+0x0/0x28 @ 1
  1571. [ 6.903619] usbcore: registered new interface driver ums-karma
  1572. [ 6.910173] initcall karma_driver_init+0x0/0x28 returned 0 after 6439 usecs
  1573. [ 6.917968] calling onetouch_driver_init+0x0/0x28 @ 1
  1574. [ 6.923819] usbcore: registered new interface driver ums-onetouch
  1575. [ 6.930674] initcall onetouch_driver_init+0x0/0x28 returned 0 after 6734 usecs
  1576. [ 6.938760] calling realtek_cr_driver_init+0x0/0x28 @ 1
  1577. [ 6.944787] usbcore: registered new interface driver ums-realtek
  1578. [ 6.951538] initcall realtek_cr_driver_init+0x0/0x28 returned 0 after 6648 usecs
  1579. [ 6.959818] calling sddr09_driver_init+0x0/0x28 @ 1
  1580. [ 6.965438] usbcore: registered new interface driver ums-sddr09
  1581. [ 6.972091] initcall sddr09_driver_init+0x0/0x28 returned 0 after 6537 usecs
  1582. [ 6.979980] calling sddr55_driver_init+0x0/0x28 @ 1
  1583. [ 6.985629] usbcore: registered new interface driver ums-sddr55
  1584. [ 6.992295] initcall sddr55_driver_init+0x0/0x28 returned 0 after 6550 usecs
  1585. [ 7.000228] calling usbat_driver_init+0x0/0x28 @ 1
  1586. [ 7.005733] usbcore: registered new interface driver ums-usbat
  1587. [ 7.012317] initcall usbat_driver_init+0x0/0x28 returned 0 after 6467 usecs
  1588. [ 7.020159] calling usb_serial_init+0x0/0x1d8 @ 1
  1589. [ 7.025731] usbcore: registered new interface driver usbserial
  1590. [ 7.032357] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  1591. [ 7.032377] usbcore: registered new interface driver usbserial_generic
  1592. [ 7.032428] USB Serial support registered for generic
  1593. [ 7.052760] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  1594. [ 7.060760] usb 1-1: Product: USB 2.0 Hub
  1595. [ 7.066275] hub 1-1:1.0: USB hub found
  1596. [ 7.070693] hub 1-1:1.0: 4 ports detected
  1597. [ 7.076438] usbserial: USB Serial Driver core
  1598. [ 7.081354] initcall usb_serial_init+0x0/0x1d8 returned 0 after 54490 usecs
  1599. [ 7.089147] calling init+0x0/0x1d0 @ 1
  1600. [ 7.093874] file system registered
  1601. [ 7.099850] android_usb gadget: Mass Storage Function, version: 2009/09/11
  1602. [ 7.107580] android_usb gadget: Number of LUNs=3
  1603. [ 7.112770] lun0: LUN: removable file: (no medium)
  1604. [ 7.118227] lun1: LUN: removable file: (no medium)
  1605. [ 7.123703] lun2: LUN: removable file: (no medium)
  1606. [ 7.129559] android_usb gadget: android_usb ready
  1607. [ 7.134875] initcall init+0x0/0x1d0 returned 0 after 40439 usecs
  1608. [ 7.141632] calling sunxi_hcd_init+0x0/0x78 @ 1
  1609. [ 7.147297] axp81x_dcdc1: Failed to create debugfs directory
  1610. [ 7.153794] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  1611. [ 7.160968] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  1612. [ 7.170389] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  1613. [ 7.178054] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1614. [ 7.186223] usb usb3: Product: sunxi_hcd host driver
  1615. [ 7.191860] usb usb3: Manufacturer: Linux 3.4.39 sunxi_hcd-hcd
  1616. [ 7.198441] usb usb3: SerialNumber: sunxi_hcd_host0
  1617. [ 7.204617] hub 3-0:1.0: USB hub found
  1618. [ 7.208826] hub 3-0:1.0: 1 port detected
  1619. [ 7.214006] initcall sunxi_hcd_init+0x0/0x78 returned 0 after 65621 usecs
  1620. [ 7.221661] calling serport_init+0x0/0x38 @ 1
  1621. [ 7.226663] initcall serport_init+0x0/0x38 returned 0 after 2 usecs
  1622. [ 7.233719] calling mousedev_init+0x0/0x94 @ 1
  1623. [ 7.239296] mousedev: PS/2 mouse device common for all mice
  1624. [ 7.245560] initcall mousedev_init+0x0/0x94 returned 0 after 6591 usecs
  1625. [ 7.252988] calling joydev_init+0x0/0x1c @ 1
  1626. [ 7.257866] initcall joydev_init+0x0/0x1c returned 0 after 4 usecs
  1627. [ 7.264802] calling evdev_init+0x0/0x1c @ 1
  1628. [ 7.269768] initcall evdev_init+0x0/0x1c returned 0 after 182 usecs
  1629. [ 7.276810] calling atkbd_init+0x0/0x28 @ 1
  1630. [ 7.281721] initcall atkbd_init+0x0/0x28 returned 0 after 108 usecs
  1631. [ 7.288736] calling sunxikbd_init+0x0/0x388 @ 1
  1632. [ 7.293934] sunxikbd_script_init: key para not found, used default para.
  1633. [ 7.302156] initcall sunxikbd_init+0x0/0x388 returned 0 after 8029 usecs
  1634. [ 7.309659] calling psmouse_init+0x0/0x90 @ 1
  1635. [ 7.314941] initcall psmouse_init+0x0/0x90 returned 0 after 272 usecs
  1636. [ 7.322289] calling keyreset_init+0x0/0x1c @ 1
  1637. [ 7.327461] initcall keyreset_init+0x0/0x1c returned 0 after 98 usecs
  1638. [ 7.334706] calling sw_device_init+0x0/0xd4 @ 1
  1639. [ 7.340113] keyname:ctp_para subname:ctp_power_io ,get error!
  1640. [ 7.340184] initcall sw_device_init+0x0/0xd4 returned 0 after 300 usecs
  1641. [ 7.340200] calling ds1307_driver_init+0x0/0x20 @ 1
  1642. [ 7.340268] initcall ds1307_driver_init+0x0/0x20 returned 0 after 52 usecs
  1643. [ 7.340282] calling sunxi_rtc_init+0x0/0x34 @ 1
  1644. [ 7.340292] sunxi_rtc_init(796): sunxi rtc device register!
  1645. [ 7.340976] rtc_gettime(333): read time 1970-1-1 1:0:17
  1646. [ 7.341361] alarm_gettime(470): get alarm time 1970-1-1 1:0:0 success!
  1647. [ 7.341796] rtc_gettime(333): read time 1970-1-1 1:0:17
  1648. [ 7.342056] rtc0 rtc0: rtc core: registered rtc0 as rtc0
  1649. [ 7.342286] sunxi_rtc_probe(756)!
  1650. [ 7.342372] initcall sunxi_rtc_init+0x0/0x34 returned 0 after 2026 usecs
  1651. [ 7.342386] calling i2c_dev_init+0x0/0xd8 @ 1
  1652. [ 7.342395] i2c /dev entries driver
  1653. [ 7.343025] initcall i2c_dev_init+0x0/0xd8 returned 0 after 609 usecs
  1654. [ 7.343040] calling sunxi_cedar_init+0x0/0x34 @ 1
  1655. [ 7.343194] sunxi cedar version 0.1
  1656. [ 7.343283] [cedar]: install start!!!
  1657. [ 7.343547] [cedar]: install end!!!
  1658. [ 7.343593] initcall sunxi_cedar_init+0x0/0x34 returned 0 after 523 usecs
  1659. [ 7.343610] calling regulator_virtual_consumer_init+0x0/0x64 @ 1
  1660. [ 7.345348] initcall regulator_virtual_consumer_init+0x0/0x64 returned 0 after 1681 usecs
  1661. [ 7.345363] calling virtual_init+0x0/0x64 @ 1
  1662. [ 7.350412] initcall virtual_init+0x0/0x64 returned 0 after 4910 usecs
  1663. [ 7.350429] calling max1668_driver_init+0x0/0x20 @ 1
  1664. [ 7.350677] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18)
  1665. [ 7.350863] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19)
  1666. [ 7.351048] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29)
  1667. [ 7.351229] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a)
  1668. [ 7.351411] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b)
  1669. [ 7.351592] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
  1670. [ 7.351773] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d)
  1671. [ 7.351955] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e)
  1672. [ 7.352223] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18)
  1673. [ 7.352487] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19)
  1674. [ 7.352751] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a)
  1675. [ 7.353014] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29)
  1676. [ 7.353277] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a)
  1677. [ 7.353540] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b)
  1678. [ 7.353804] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c)
  1679. [ 7.354066] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d)
  1680. [ 7.354331] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e)
  1681. [ 7.354596] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
  1682. [ 7.354860] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x19)
  1683. [ 7.355124] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1a)
  1684. [ 7.355387] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x29)
  1685. [ 7.355654] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x2a)
  1686. [ 7.355917] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x2b)
  1687. [ 7.356181] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
  1688. [ 7.356445] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4d)
  1689. [ 7.356709] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4e)
  1690. [ 7.356730] initcall max1668_driver_init+0x0/0x20 returned 0 after 6137 usecs
  1691. [ 7.356743] calling dm_init+0x0/0x6c @ 1
  1692. [ 7.357175] device-mapper: uevent: version 1.0.3
  1693. [ 7.357605] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  1694. [ 7.357627] initcall dm_init+0x0/0x6c returned 0 after 848 usecs
  1695. [ 7.357643] calling dm_crypt_init+0x0/0x80 @ 1
  1696. [ 7.357837] initcall dm_crypt_init+0x0/0x80 returned 0 after 173 usecs
  1697. [ 7.357852] calling dm_snapshot_init+0x0/0x22c @ 1
  1698. [ 7.357933] initcall dm_snapshot_init+0x0/0x22c returned 0 after 65 usecs
  1699. [ 7.357948] calling dm_mirror_init+0x0/0x94 @ 1
  1700. [ 7.358122] initcall dm_mirror_init+0x0/0x94 returned 0 after 155 usecs
  1701. [ 7.358136] calling dm_dirty_log_init+0x0/0x5c @ 1
  1702. [ 7.358153] initcall dm_dirty_log_init+0x0/0x5c returned 0 after 3 usecs
  1703. [ 7.358167] calling dm_zero_init+0x0/0x38 @ 1
  1704. [ 7.358182] initcall dm_zero_init+0x0/0x38 returned 0 after 2 usecs
  1705. [ 7.358196] calling cpufreq_stats_init+0x0/0xe8 @ 1
  1706. [ 7.358226] initcall cpufreq_stats_init+0x0/0xe8 returned 0 after 16 usecs
  1707. [ 7.358241] calling cpufreq_gov_powersave_init+0x0/0x1c @ 1
  1708. [ 7.358258] initcall cpufreq_gov_powersave_init+0x0/0x1c returned 0 after 2 usecs
  1709. [ 7.358273] calling cpufreq_gov_userspace_init+0x0/0x1c @ 1
  1710. [ 7.358288] initcall cpufreq_gov_userspace_init+0x0/0x1c returned 0 after 1 usecs
  1711. [ 7.358302] calling cpufreq_gov_dbs_init+0x0/0x1c @ 1
  1712. [ 7.358317] initcall cpufreq_gov_dbs_init+0x0/0x1c returned 0 after 1 usecs
  1713. [ 7.358337] calling autohotplug_init+0x0/0x448 @ 1
  1714. [ 7.358669] initcall autohotplug_init+0x0/0x448 returned 0 after 304 usecs
  1715. [ 7.358684] calling sunxi_cpufreq_init+0x0/0x44c @ 1
  1716. [ 7.358884] sunxi_get_soc_bin: slow chip
  1717. [ 7.361682] initcall sunxi_cpufreq_init+0x0/0x44c returned 0 after 2914 usecs
  1718. [ 7.361691] calling mmc_blk_init+0x0/0x88 @ 1
  1719. [ 7.361731] initcall mmc_blk_init+0x0/0x88 returned 0 after 31 usecs
  1720. [ 7.361739] calling sunxi_mci_init+0x0/0x160 @ 1
  1721. [ 7.361746] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.113 2015-5-20 17:17) Compiled in Dec 13 2017 at 19:33:46
  1722. [ 7.361781] [mmc]: get mmc1's sdc_power is null!
  1723. [ 7.361800] [mmc]: get mmc2's 2xmode ok, val = 1
  1724. [ 7.361806] [mmc]: get mmc2's ddrmode ok, val = 1
  1725. [ 7.361815] [mmc]: MMC host used card: 0x7, boot card: 0x5, io_card 2
  1726. [ 7.442316] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
  1727. [ 7.442920] get sysconfig para erro!
  1728. [ 7.442934] get sysconfig para erro!
  1729. [ 7.442946] get sysconfig para erro!
  1730. [ 7.442959] get sysconfig para erro!
  1731. [ 7.443000] ctp_wakeup: !!!!gpio data 1
  1732. [ 7.550045] get_device_para_value:get subname:icn83xx_ts error! val.val:0
  1733. [ 7.550052] get_detect_list: script_get_item err.support_number = 11.
  1734. [ 7.550060] get_device_para_value:get subname:gt818_ts error! val.val:0
  1735. [ 7.550066] get_detect_list: script_get_item err.support_number = 8.
  1736. [ 7.550073] get_device_para_value:get subname:tu_ts error! val.val:0
  1737. [ 7.550078] get_detect_list: script_get_item err.support_number = 7.
  1738. [ 7.550085] get_device_para_value:get subname:gt9xxf_ts error! val.val:0
  1739. [ 7.550091] get_detect_list: script_get_item err.support_number = 6.
  1740. [ 7.550099] get_device_para_value:get subname:gslX680new error! val.val:0
  1741. [ 7.550105] get_detect_list: script_get_item err.support_number = 3.
  1742. [ 7.550142] sw_get_write_info:open error ....IS(filp):1
  1743. [ 7.550160] sw_set_write_info:open error ....IS(filp):1
  1744. [ 7.550165] get write info erro!
  1745. [ 7.550343] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  1746. [ 7.570184] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  1747. [ 7.590184] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  1748. [ 7.610184] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  1749. [ 7.630185] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  1750. [ 7.635648] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1751. [ 8.133796] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1752. [ 8.143815] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1753. [ 8.145016] [mmc]: sdc0 fail to get regulator
  1754. [ 8.145022] [mmc]: *** sunxi_mci_set_ios(L2159): sdc0 card_power_on fail
  1755. [ 8.160027] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1756. [ 8.177648] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1757. [ 8.187420] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
  1758. [ 8.196369] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
  1759. [ 8.204507] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1760. [ 8.206137] initcall sunxi_mci_init+0x0/0x160 returned 0 after 824591 usecs
  1761. [ 8.206148] calling gpio_led_driver_init+0x0/0x1c @ 1
  1762. [ 8.206267] initcall gpio_led_driver_init+0x0/0x1c returned 0 after 108 usecs
  1763. [ 8.206276] calling sunxi_leds_init+0x0/0x1bc @ 1
  1764. [ 8.206291] no red_led, ignore it!
  1765. [ 8.206621] Registered led device: green_led
  1766. [ 8.206788] Registered led device: blue_led
  1767. [ 8.206804] initcall sunxi_leds_init+0x0/0x1bc returned 0 after 506 usecs
  1768. [ 8.206812] calling respiration_init+0x0/0x40 @ 1
  1769. [ 8.206887] Registered led device: sunxi_respiration_lamp
  1770. [ 8.206895] initcall respiration_init+0x0/0x40 returned 0 after 73 usecs
  1771. [ 8.206903] calling timer_trig_init+0x0/0x1c @ 1
  1772. [ 8.206916] initcall timer_trig_init+0x0/0x1c returned 0 after 5 usecs
  1773. [ 8.206924] calling heartbeat_trig_init+0x0/0x1c @ 1
  1774. [ 8.207002] initcall heartbeat_trig_init+0x0/0x1c returned 0 after 67 usecs
  1775. [ 8.207011] calling bl_trig_init+0x0/0x1c @ 1
  1776. [ 8.207023] initcall bl_trig_init+0x0/0x1c returned 0 after 4 usecs
  1777. [ 8.207031] calling gpio_trig_init+0x0/0x1c @ 1
  1778. [ 8.207043] initcall gpio_trig_init+0x0/0x1c returned 0 after 4 usecs
  1779. [ 8.207051] calling defon_trig_init+0x0/0x1c @ 1
  1780. [ 8.207064] initcall defon_trig_init+0x0/0x1c returned 0 after 4 usecs
  1781. [ 8.207071] calling respiration_trig_init+0x0/0x54 @ 1
  1782. [ 8.207119] initcall respiration_trig_init+0x0/0x54 returned 0 after 38 usecs
  1783. [ 8.207128] calling switch_class_init+0x0/0x30 @ 1
  1784. [ 8.207152] initcall switch_class_init+0x0/0x30 returned 0 after 15 usecs
  1785. [ 8.207161] calling gpio_switch_init+0x0/0x1c @ 1
  1786. [ 8.207251] initcall gpio_switch_init+0x0/0x1c returned 0 after 78 usecs
  1787. [ 8.207259] calling hid_init+0x0/0x7c @ 1
  1788. [ 8.207339] initcall hid_init+0x0/0x7c returned 0 after 69 usecs
  1789. [ 8.207347] calling a4_init+0x0/0x28 @ 1
  1790. [ 8.207412] initcall a4_init+0x0/0x28 returned 0 after 55 usecs
  1791. [ 8.207420] calling ax_init+0x0/0x28 @ 1
  1792. [ 8.207453] initcall ax_init+0x0/0x28 returned 0 after 24 usecs
  1793. [ 8.207461] calling apple_init+0x0/0x40 @ 1
  1794. [ 8.207506] initcall apple_init+0x0/0x40 returned 0 after 35 usecs
  1795. [ 8.207514] calling belkin_init+0x0/0x28 @ 1
  1796. [ 8.207546] initcall belkin_init+0x0/0x28 returned 0 after 23 usecs
  1797. [ 8.207553] calling ch_init+0x0/0x28 @ 1
  1798. [ 8.207586] initcall ch_init+0x0/0x28 returned 0 after 23 usecs
  1799. [ 8.207593] calling ch_init+0x0/0x28 @ 1
  1800. [ 8.207625] initcall ch_init+0x0/0x28 returned 0 after 23 usecs
  1801. [ 8.207633] calling cp_init+0x0/0x28 @ 1
  1802. [ 8.207665] initcall cp_init+0x0/0x28 returned 0 after 23 usecs
  1803. [ 8.207673] calling dr_init+0x0/0x28 @ 1
  1804. [ 8.207715] initcall dr_init+0x0/0x28 returned 0 after 32 usecs
  1805. [ 8.207725] calling ems_init+0x0/0x30 @ 1
  1806. [ 8.207759] initcall ems_init+0x0/0x30 returned 0 after 25 usecs
  1807. [ 8.207767] calling ez_init+0x0/0x28 @ 1
  1808. [ 8.207799] initcall ez_init+0x0/0x28 returned 0 after 23 usecs
  1809. [ 8.207807] calling gyration_init+0x0/0x28 @ 1
  1810. [ 8.207840] initcall gyration_init+0x0/0x28 returned 0 after 24 usecs
  1811. [ 8.207848] calling holtek_init+0x0/0x28 @ 1
  1812. [ 8.207881] initcall holtek_init+0x0/0x28 returned 0 after 24 usecs
  1813. [ 8.207889] calling ks_init+0x0/0x28 @ 1
  1814. [ 8.207921] initcall ks_init+0x0/0x28 returned 0 after 23 usecs
  1815. [ 8.207929] calling keytouch_init+0x0/0x28 @ 1
  1816. [ 8.207962] initcall keytouch_init+0x0/0x28 returned 0 after 24 usecs
  1817. [ 8.207970] calling kye_init+0x0/0x28 @ 1
  1818. [ 8.208003] initcall kye_init+0x0/0x28 returned 0 after 23 usecs
  1819. [ 8.208012] calling ts_init+0x0/0x28 @ 1
  1820. [ 8.208051] initcall ts_init+0x0/0x28 returned 0 after 30 usecs
  1821. [ 8.208059] calling lg_init+0x0/0x28 @ 1
  1822. [ 8.208092] initcall lg_init+0x0/0x28 returned 0 after 24 usecs
  1823. [ 8.208100] calling logi_dj_init+0x0/0x88 @ 1
  1824. [ 8.208167] initcall logi_dj_init+0x0/0x88 returned 0 after 56 usecs
  1825. [ 8.208175] calling ms_init+0x0/0x28 @ 1
  1826. [ 8.208209] initcall ms_init+0x0/0x28 returned 0 after 24 usecs
  1827. [ 8.208217] calling mr_init+0x0/0x28 @ 1
  1828. [ 8.208250] initcall mr_init+0x0/0x28 returned 0 after 24 usecs
  1829. [ 8.208258] calling mt_init+0x0/0x28 @ 1
  1830. [ 8.208292] initcall mt_init+0x0/0x28 returned 0 after 25 usecs
  1831. [ 8.208299] calling ntrig_init+0x0/0x28 @ 1
  1832. [ 8.208345] initcall ntrig_init+0x0/0x28 returned 0 after 35 usecs
  1833. [ 8.208353] calling ortek_init+0x0/0x28 @ 1
  1834. [ 8.208387] initcall ortek_init+0x0/0x28 returned 0 after 24 usecs
  1835. [ 8.208396] calling pk_init+0x0/0x48 @ 1
  1836. [ 8.208452] initcall pk_init+0x0/0x48 returned 0 after 46 usecs
  1837. [ 8.208460] calling pl_init+0x0/0x28 @ 1
  1838. [ 8.208495] initcall pl_init+0x0/0x28 returned 0 after 26 usecs
  1839. [ 8.208503] calling pl_init+0x0/0x28 @ 1
  1840. [ 8.208537] initcall pl_init+0x0/0x28 returned 0 after 25 usecs
  1841. [ 8.208545] calling picolcd_init+0x0/0x28 @ 1
  1842. [ 8.208579] initcall picolcd_init+0x0/0x28 returned 0 after 25 usecs
  1843. [ 8.208587] calling px_init+0x0/0x28 @ 1
  1844. [ 8.208621] initcall px_init+0x0/0x28 returned 0 after 24 usecs
  1845. [ 8.208629] calling roccat_init+0x0/0x84 @ 1
  1846. [ 8.208640] initcall roccat_init+0x0/0x84 returned 0 after 2 usecs
  1847. [ 8.208647] calling arvo_init+0x0/0x78 @ 1
  1848. [ 8.208694] initcall arvo_init+0x0/0x78 returned 0 after 37 usecs
  1849. [ 8.208702] calling isku_init+0x0/0x78 @ 1
  1850. [ 8.208748] initcall isku_init+0x0/0x78 returned 0 after 36 usecs
  1851. [ 8.208756] calling kone_init+0x0/0x78 @ 1
  1852. [ 8.208811] initcall kone_init+0x0/0x78 returned 0 after 45 usecs
  1853. [ 8.208820] calling koneplus_init+0x0/0x78 @ 1
  1854. [ 8.208865] initcall koneplus_init+0x0/0x78 returned 0 after 36 usecs
  1855. [ 8.208873] calling kovaplus_init+0x0/0x78 @ 1
  1856. [ 8.208918] initcall kovaplus_init+0x0/0x78 returned 0 after 35 usecs
  1857. [ 8.208927] calling pyra_init+0x0/0x78 @ 1
  1858. [ 8.208973] initcall pyra_init+0x0/0x78 returned 0 after 36 usecs
  1859. [ 8.208981] calling saitek_init+0x0/0x28 @ 1
  1860. [ 8.209014] initcall saitek_init+0x0/0x28 returned 0 after 24 usecs
  1861. [ 8.209023] calling samsung_init+0x0/0x28 @ 1
  1862. [ 8.209056] initcall samsung_init+0x0/0x28 returned 0 after 24 usecs
  1863. [ 8.209066] calling sjoy_init+0x0/0x28 @ 1
  1864. [ 8.209101] initcall sjoy_init+0x0/0x28 returned 0 after 26 usecs
  1865. [ 8.209109] calling sony_init+0x0/0x28 @ 1
  1866. [ 8.209151] initcall sony_init+0x0/0x28 returned 0 after 32 usecs
  1867. [ 8.209159] calling speedlink_init+0x0/0x28 @ 1
  1868. [ 8.209194] initcall speedlink_init+0x0/0x28 returned 0 after 26 usecs
  1869. [ 8.209202] calling sp_init+0x0/0x28 @ 1
  1870. [ 8.209236] initcall sp_init+0x0/0x28 returned 0 after 25 usecs
  1871. [ 8.209244] calling ga_init+0x0/0x28 @ 1
  1872. [ 8.209278] initcall ga_init+0x0/0x28 returned 0 after 25 usecs
  1873. [ 8.209286] calling tm_init+0x0/0x28 @ 1
  1874. [ 8.209320] initcall tm_init+0x0/0x28 returned 0 after 25 usecs
  1875. [ 8.209328] calling tivo_init+0x0/0x28 @ 1
  1876. [ 8.209362] initcall tivo_init+0x0/0x28 returned 0 after 25 usecs
  1877. [ 8.209370] calling ts_init+0x0/0x28 @ 1
  1878. [ 8.209404] initcall ts_init+0x0/0x28 returned 0 after 25 usecs
  1879. [ 8.209412] calling twinhan_init+0x0/0x28 @ 1
  1880. [ 8.209446] initcall twinhan_init+0x0/0x28 returned 0 after 25 usecs
  1881. [ 8.209454] calling uclogic_init+0x0/0x28 @ 1
  1882. [ 8.209494] initcall uclogic_init+0x0/0x28 returned 0 after 30 usecs
  1883. [ 8.209502] calling zp_init+0x0/0x28 @ 1
  1884. [ 8.209544] initcall zp_init+0x0/0x28 returned 0 after 33 usecs
  1885. [ 8.209552] calling zc_init+0x0/0x28 @ 1
  1886. [ 8.209587] initcall zc_init+0x0/0x28 returned 0 after 26 usecs
  1887. [ 8.209596] calling waltop_init+0x0/0x28 @ 1
  1888. [ 8.209630] initcall waltop_init+0x0/0x28 returned 0 after 25 usecs
  1889. [ 8.209638] calling hid_init+0x0/0x80 @ 1
  1890. [ 8.209743] usbcore: registered new interface driver usbhid
  1891. [ 8.209749] usbhid: USB HID core driver
  1892. [ 8.209756] initcall hid_init+0x0/0x80 returned 0 after 107 usecs
  1893. [ 8.209765] calling alsa_timer_init+0x0/0x188 @ 1
  1894. [ 8.210042] initcall alsa_timer_init+0x0/0x188 returned 0 after 259 usecs
  1895. [ 8.210051] calling alsa_pcm_init+0x0/0x74 @ 1
  1896. [ 8.210066] initcall alsa_pcm_init+0x0/0x74 returned 0 after 7 usecs
  1897. [ 8.210075] calling snd_mem_init+0x0/0x4c @ 1
  1898. [ 8.210096] initcall snd_mem_init+0x0/0x4c returned 0 after 13 usecs
  1899. [ 8.210105] calling alsa_rawmidi_init+0x0/0x20 @ 1
  1900. [ 8.210115] initcall alsa_rawmidi_init+0x0/0x20 returned 0 after 1 usecs
  1901. [ 8.210123] calling snd_soc_init+0x0/0x114 @ 1
  1902. [ 8.210489] initcall snd_soc_init+0x0/0x114 returned 0 after 348 usecs
  1903. [ 8.210498] calling ac100_codec_driver_init+0x0/0x1c @ 1
  1904. [ 8.210527] ac100_probe,line:2917
  1905. [ 8.210617] initcall ac100_codec_driver_init+0x0/0x1c returned 0 after 106 usecs
  1906. [ 8.210626] calling sunxi_daudio0_init+0x0/0xd4 @ 1
  1907. [ 8.211234] initcall sunxi_daudio0_init+0x0/0xd4 returned 0 after 582 usecs
  1908. [ 8.211243] calling sunxi_soc_platform_daudio_init+0x0/0x34 @ 1
  1909. [ 8.211457] initcall sunxi_soc_platform_daudio_init+0x0/0x34 returned 0 after 198 usecs
  1910. [ 8.211467] calling snddaudio_codec_init+0x0/0xa0 @ 1
  1911. [ 8.211656] initcall snddaudio_codec_init+0x0/0xa0 returned 0 after 174 usecs
  1912. [ 8.211664] calling sunxi_snddaudio0_init+0x0/0x34 @ 1
  1913. [ 8.211908] initcall sunxi_snddaudio0_init+0x0/0x34 returned 0 after 227 usecs
  1914. [ 8.211917] calling bb_init+0x0/0x34 @ 1
  1915. [ 8.223764] async_waiting @ 1
  1916. [ 8.223900] calling 1_dapm_pre_sequence_async+0x0/0xa0 @ 145
  1917. [ 8.223911] initcall 1_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  1918. [ 8.223930] calling 2_dapm_pre_sequence_async+0x0/0xa0 @ 145
  1919. [ 8.223940] initcall 2_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  1920. [ 8.223958] calling 3_dapm_pre_sequence_async+0x0/0xa0 @ 145
  1921. [ 8.224001] calling 4_dapm_pre_sequence_async+0x0/0xa0 @ 159
  1922. [ 8.224013] initcall 4_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 2 usecs
  1923. [ 8.225007] initcall 3_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1010 usecs
  1924. [ 8.225037] async_continuing @ 1 after 1236 usec
  1925. [ 8.225173] calling 5_dapm_post_sequence_async+0x0/0xd8 @ 145
  1926. [ 8.225180] async_waiting @ 1
  1927. [ 8.225187] initcall 5_dapm_post_sequence_async+0x0/0xd8 returned 0 after 1 usecs
  1928. [ 8.225198] calling 6_dapm_post_sequence_async+0x0/0xd8 @ 159
  1929. [ 8.225209] initcall 6_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  1930. [ 8.225218] calling 7_dapm_post_sequence_async+0x0/0xd8 @ 145
  1931. [ 8.225230] initcall 7_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  1932. [ 8.225240] calling 8_dapm_post_sequence_async+0x0/0xd8 @ 159
  1933. [ 8.225250] initcall 8_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  1934. [ 8.225283] async_continuing @ 1 after 94 usec
  1935. [ 8.240378] ------------audio_hmic_irq----------
  1936. [ 8.247748] ------------audio_hmic_irq----------
  1937. [ 8.382434] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0718
  1938. [ 8.382442] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
  1939. [ 8.382449] usb 1-1.1: Product: USB Storage
  1940. [ 8.382455] usb 1-1.1: SerialNumber: 000000000033
  1941. [ 8.406741] scsi0 : usb-storage 1-1.1:1.0
  1942. [ 8.408429] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1943. [ 8.409847] *******************Try sdio*******************
  1944. [ 8.410664] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  1945. [ 8.411496] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  1946. [ 8.412326] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  1947. [ 8.413156] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  1948. [ 8.413179] *******************Try sd *******************
  1949. [ 8.413829] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1950. [ 8.413921] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1951. [ 8.416388] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1952. [ 8.431534] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1953. [ 8.431637] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1954. [ 8.434118] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  1955. [ 8.434172] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  1956. [ 8.434268] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1957. [ 8.434326] mmc0: new high speed SDHC card at address 59b4
  1958. [ 8.434674] mmcblk0: mmc0:59b4 7.36 GiB
  1959. [ 8.435898] mmcblk0: p1 p2
  1960. [ 8.436559] *******************sd init ok*******************
  1961. [ 8.436579] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1962. [ 8.450042] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1963. [ 8.470848] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52, RTO !!
  1964. [ 8.471680] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52, RTO !!
  1965. [ 8.471703] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1966. [ 8.474165] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1967. [ 8.476053] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 8, RTO !!
  1968. [ 8.476073] *******************Try sdio*******************
  1969. [ 8.476888] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  1970. [ 8.477716] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  1971. [ 8.478543] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  1972. [ 8.479371] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  1973. [ 8.479391] *******************Try sd *******************
  1974. [ 8.480206] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  1975. [ 8.481036] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  1976. [ 8.481863] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  1977. [ 8.482691] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  1978. [ 8.482711] *******************Try mmc*******************
  1979. [ 8.482720] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1980. [ 8.483122] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1981. [ 8.483204] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1982. [ 8.483284] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1983. [ 8.485744] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1984. [ 8.504197] asoc: ac100-aif1 <-> pri_dai mapping ok
  1985. [ 8.580244] usb 1-1.2: new high-speed USB device number 4 using sunxi-ehci
  1986. [ 8.641219] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1987. [ 8.653179] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1988. [ 8.653589] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1989. [ 8.653675] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1990. [ 8.653751] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  1991. [ 8.653798] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  1992. [ 8.653876] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  1993. [ 8.653950] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  1994. [ 8.654086] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  1995. [ 8.654157] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  1996. [ 8.654206] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  1997. [ 8.654273] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  1998. [ 8.654346] mmc1: new high speed DDR MMC card at address 0001
  1999. [ 8.654735] mmcblk1: mmc1:0001 8WPD3R 7.28 GiB
  2000. [ 8.654894] mmcblk1boot0: mmc1:0001 8WPD3R partition 1 4.00 MiB
  2001. [ 8.655036] mmcblk1boot1: mmc1:0001 8WPD3R partition 2 4.00 MiB
  2002. [ 8.655987] mmcblk1:
  2003. [ 8.656743] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2004. [ 8.658640] mmcblk1boot1: unknown partition table
  2005. [ 8.659256] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2006. [ 8.660134] mmcblk1boot0: unknown partition table
  2007. [ 8.660376] *******************mmc init ok *******************
  2008. [ 8.691682] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0608
  2009. [ 8.691690] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  2010. [ 8.691697] usb 1-1.2: Product: USB2.0 Hub
  2011. [ 8.692428] hub 1-1.2:1.0: USB hub found
  2012. [ 8.692804] hub 1-1.2:1.0: 4 ports detected
  2013. [ 8.695188] async_waiting @ 1
  2014. [ 8.695216] calling 9_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2015. [ 8.695226] initcall 9_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2016. [ 8.695238] calling 10_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2017. [ 8.695249] calling 12_dapm_pre_sequence_async+0x0/0xa0 @ 159
  2018. [ 8.695258] calling 11_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2019. [ 8.695268] initcall 12_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  2020. [ 8.695277] initcall 11_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2021. [ 8.695287] initcall 10_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2022. [ 8.790834] async_continuing @ 1 after 1 usec
  2023. [ 8.970364] usb 1-1.2.1: new low-speed USB device number 5 using sunxi-ehci
  2024. [ 8.981738] async_waiting @ 1
  2025. [ 8.981751] calling 13_dapm_post_sequence_async+0x0/0xd8 @ 160
  2026. [ 8.981761] initcall 13_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2027. [ 8.981771] calling 14_dapm_post_sequence_async+0x0/0xd8 @ 161
  2028. [ 8.981782] calling 15_dapm_post_sequence_async+0x0/0xd8 @ 5
  2029. [ 8.981790] calling 16_dapm_post_sequence_async+0x0/0xd8 @ 160
  2030. [ 8.981798] initcall 14_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2031. [ 8.981807] initcall 16_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2032. [ 8.981816] initcall 15_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2033. [ 9.084568] usb 1-1.2.1: New USB device found, idVendor=413c, idProduct=3012
  2034. [ 9.084582] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  2035. [ 9.084594] usb 1-1.2.1: Product: Dell USB Optical Mouse
  2036. [ 9.084604] usb 1-1.2.1: Manufacturer: Dell
  2037. [ 9.089549] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-sunxi-ehci-1.2.1/input0
  2038. [ 9.170512] usb 1-1.2.2: new low-speed USB device number 6 using sunxi-ehci
  2039. [ 9.174531] async_continuing @ 1 after 1 usec
  2040. [ 9.271600] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  2041. [ 9.286944] usb 1-1.2.2: New USB device found, idVendor=413c, idProduct=2107
  2042. [ 9.286958] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  2043. [ 9.286970] usb 1-1.2.2: Product: Dell USB Entry Keyboard
  2044. [ 9.286980] usb 1-1.2.2: Manufacturer: Dell
  2045. [ 9.292976] generic-usb 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-sunxi-ehci-1.2.2/input0
  2046. [ 9.466125] async_waiting @ 1
  2047. [ 9.466151] calling 17_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2048. [ 9.466168] initcall 17_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2049. [ 9.466187] calling 18_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2050. [ 9.466204] calling 19_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2051. [ 9.466219] calling 20_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2052. [ 9.466234] initcall 18_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2053. [ 9.466249] initcall 20_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 2 usecs
  2054. [ 9.466265] initcall 19_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2055. [ 9.501574] scsi 0:0:0:0: Direct-Access USB TO I DE/SATA Device 0016 PQ: 0 ANSI: 4
  2056. [ 9.504285] calling 21_sd_probe_async+0x0/0x1ac @ 161
  2057. [ 9.504615] sd 0:0:0:0: Attached scsi generic sg0 type 0
  2058. [ 9.507371] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  2059. [ 9.508495] sd 0:0:0:0: [sda] Asking for cache data failed
  2060. [ 9.508507] sd 0:0:0:0: [sda] Assuming drive cache: write through
  2061. [ 9.512993] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  2062. [ 9.514120] sd 0:0:0:0: [sda] Asking for cache data failed
  2063. [ 9.514132] sd 0:0:0:0: [sda] Assuming drive cache: write through
  2064. [ 9.514147] sd 0:0:0:0: [sda] Attached SCSI disk
  2065. [ 9.514168] initcall 21_sd_probe_async+0x0/0x1ac returned 0 after 9631 usecs
  2066. [ 9.563529] async_continuing @ 1 after 2 usec
  2067. [ 9.660936] async_waiting @ 1
  2068. [ 9.660957] calling 22_dapm_post_sequence_async+0x0/0xd8 @ 161
  2069. [ 9.660974] initcall 22_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2070. [ 9.660993] calling 23_dapm_post_sequence_async+0x0/0xd8 @ 5
  2071. [ 9.661011] calling 24_dapm_post_sequence_async+0x0/0xd8 @ 160
  2072. [ 9.661025] calling 25_dapm_post_sequence_async+0x0/0xd8 @ 161
  2073. [ 9.661039] initcall 23_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2074. [ 9.661055] initcall 25_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2075. [ 9.661070] initcall 24_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2076. [ 9.855522] async_continuing @ 1 after 0 usec
  2077. [ 9.958997] asoc: ac100-aif1 <-> sec_dai mapping ok
  2078. [ 10.055919] async_waiting @ 1
  2079. [ 10.055946] calling 26_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2080. [ 10.055963] initcall 26_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  2081. [ 10.055981] calling 27_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2082. [ 10.055996] calling 29_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2083. [ 10.056012] calling 28_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2084. [ 10.056027] initcall 29_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 2 usecs
  2085. [ 10.056042] initcall 28_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2086. [ 10.056058] initcall 27_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2087. [ 10.152955] async_continuing @ 1 after 1 usec
  2088. [ 10.346404] async_waiting @ 1
  2089. [ 10.346426] calling 30_dapm_post_sequence_async+0x0/0xd8 @ 161
  2090. [ 10.346442] initcall 30_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2091. [ 10.346459] calling 31_dapm_post_sequence_async+0x0/0xd8 @ 5
  2092. [ 10.346476] calling 33_dapm_post_sequence_async+0x0/0xd8 @ 160
  2093. [ 10.346491] initcall 31_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2094. [ 10.346506] calling 32_dapm_post_sequence_async+0x0/0xd8 @ 161
  2095. [ 10.346521] initcall 33_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2096. [ 10.346536] initcall 32_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2097. [ 10.482296] async_continuing @ 1 after 1 usec
  2098. [ 10.487383] asoc: ac100-aif3 <-> bb-voice-dai mapping ok
  2099. [ 10.493388] async_waiting @ 1
  2100. [ 10.493409] calling 34_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2101. [ 10.493425] initcall 34_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2102. [ 10.493443] calling 35_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2103. [ 10.493458] calling 37_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2104. [ 10.493473] calling 36_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2105. [ 10.493488] initcall 37_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  2106. [ 10.493504] initcall 35_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2107. [ 10.493519] initcall 36_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2108. [ 10.556007] async_continuing @ 1 after 1 usec
  2109. [ 10.560925] async_waiting @ 1
  2110. [ 10.560944] calling 38_dapm_post_sequence_async+0x0/0xd8 @ 5
  2111. [ 10.560960] initcall 38_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2112. [ 10.560978] calling 39_dapm_post_sequence_async+0x0/0xd8 @ 160
  2113. [ 10.560993] calling 41_dapm_post_sequence_async+0x0/0xd8 @ 161
  2114. [ 10.561007] calling 40_dapm_post_sequence_async+0x0/0xd8 @ 5
  2115. [ 10.561021] initcall 39_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2116. [ 10.561037] initcall 41_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2117. [ 10.561052] initcall 40_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2118. [ 10.624129] async_continuing @ 1 after 0 usec
  2119. [ 10.629186] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  2120. [ 10.635476] async_waiting @ 1
  2121. [ 10.635496] calling 42_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2122. [ 10.635512] initcall 42_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2123. [ 10.635529] calling 43_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2124. [ 10.635546] calling 44_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2125. [ 10.635560] calling 45_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2126. [ 10.635575] initcall 43_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2127. [ 10.635590] initcall 44_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2128. [ 10.635606] initcall 45_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 2 usecs
  2129. [ 10.697909] async_continuing @ 1 after 1 usec
  2130. [ 10.702825] async_waiting @ 1
  2131. [ 10.702846] calling 46_dapm_post_sequence_async+0x0/0xd8 @ 5
  2132. [ 10.702862] initcall 46_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2133. [ 10.702881] calling 47_dapm_post_sequence_async+0x0/0xd8 @ 160
  2134. [ 10.702896] calling 49_dapm_post_sequence_async+0x0/0xd8 @ 161
  2135. [ 10.702911] calling 48_dapm_post_sequence_async+0x0/0xd8 @ 5
  2136. [ 10.702925] initcall 49_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2137. [ 10.702940] initcall 47_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2138. [ 10.702956] initcall 48_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2139. [ 10.766039] async_continuing @ 1 after 0 usec
  2140. [ 10.770970] async_waiting @ 1
  2141. [ 10.770990] calling 50_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2142. [ 10.771005] initcall 50_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2143. [ 10.771024] calling 51_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2144. [ 10.771038] calling 52_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2145. [ 10.771054] calling 53_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2146. [ 10.771068] initcall 52_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2147. [ 10.771083] initcall 51_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2148. [ 10.771099] initcall 53_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  2149. [ 10.833397] async_continuing @ 1 after 0 usec
  2150. [ 10.838287] async_waiting @ 1
  2151. [ 10.838308] calling 54_dapm_post_sequence_async+0x0/0xd8 @ 161
  2152. [ 10.838324] initcall 54_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2153. [ 10.838343] calling 55_dapm_post_sequence_async+0x0/0xd8 @ 160
  2154. [ 10.838359] calling 56_dapm_post_sequence_async+0x0/0xd8 @ 5
  2155. [ 10.838373] calling 57_dapm_post_sequence_async+0x0/0xd8 @ 161
  2156. [ 10.838387] initcall 56_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2157. [ 10.838403] initcall 55_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2158. [ 10.838418] initcall 57_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2159. [ 10.901681] async_continuing @ 1 after 0 usec
  2160. [ 10.908868] async_waiting @ 1
  2161. [ 10.908889] calling 58_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2162. [ 10.908905] initcall 58_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2163. [ 10.908923] calling 59_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2164. [ 10.908940] calling 60_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2165. [ 10.908955] initcall 59_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2166. [ 10.908971] calling 61_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2167. [ 10.908985] initcall 60_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2168. [ 10.909001] initcall 61_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  2169. [ 10.971494] async_continuing @ 1 after 0 usec
  2170. [ 10.976389] async_waiting @ 1
  2171. [ 10.976410] calling 62_dapm_post_sequence_async+0x0/0xd8 @ 161
  2172. [ 10.976426] initcall 62_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2173. [ 10.976442] calling 63_dapm_post_sequence_async+0x0/0xd8 @ 5
  2174. [ 10.976459] calling 64_dapm_post_sequence_async+0x0/0xd8 @ 160
  2175. [ 10.976474] calling 65_dapm_post_sequence_async+0x0/0xd8 @ 161
  2176. [ 10.976488] initcall 63_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2177. [ 10.976504] initcall 64_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2178. [ 10.976519] initcall 65_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2179. [ 11.039825] async_continuing @ 1 after 0 usec
  2180. [ 11.047239] initcall bb_init+0x0/0x34 returned 0 after 2768854 usecs
  2181. [ 11.054304] calling sunxi_hdmiaudio_init+0x0/0x34 @ 1
  2182. [ 11.060336] initcall sunxi_hdmiaudio_init+0x0/0x34 returned 0 after 325 usecs
  2183. [ 11.068251] calling sunxi_soc_platform_hdmiaudio_init+0x0/0x34 @ 1
  2184. [ 11.075411] initcall sunxi_soc_platform_hdmiaudio_init+0x0/0x34 returned 0 after 182 usecs
  2185. [ 11.084596] calling sndhdmi_codec_init+0x0/0x34 @ 1
  2186. [ 11.090300] initcall sndhdmi_codec_init+0x0/0x34 returned 0 after 180 usecs
  2187. [ 11.098020] calling sunxi_sndhdmi_init+0x0/0x34 @ 1
  2188. [ 11.103881] async_waiting @ 1
  2189. [ 11.103897] calling 66_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2190. [ 11.103906] initcall 66_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2191. [ 11.103917] calling 67_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2192. [ 11.103926] calling 68_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2193. [ 11.103934] initcall 67_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  2194. [ 11.103943] initcall 68_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  2195. [ 11.151423] async_continuing @ 1 after 0 usec
  2196. [ 11.156262] async_waiting @ 1
  2197. [ 11.156277] calling 69_dapm_post_sequence_async+0x0/0xd8 @ 161
  2198. [ 11.156286] initcall 69_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2199. [ 11.156296] calling 70_dapm_post_sequence_async+0x0/0xd8 @ 160
  2200. [ 11.156305] calling 71_dapm_post_sequence_async+0x0/0xd8 @ 5
  2201. [ 11.156314] initcall 70_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2202. [ 11.156323] initcall 71_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2203. [ 11.204182] async_continuing @ 1 after 0 usec
  2204. [ 11.211329] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  2205. [ 11.217432] async_waiting @ 1
  2206. [ 11.217447] calling 72_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2207. [ 11.217456] initcall 72_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2208. [ 11.217467] calling 73_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2209. [ 11.217477] calling 74_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2210. [ 11.217486] initcall 73_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2211. [ 11.217495] initcall 74_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  2212. [ 11.264777] async_continuing @ 1 after 0 usec
  2213. [ 11.269615] async_waiting @ 1
  2214. [ 11.269630] calling 75_dapm_post_sequence_async+0x0/0xd8 @ 161
  2215. [ 11.269639] initcall 75_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2216. [ 11.269649] calling 76_dapm_post_sequence_async+0x0/0xd8 @ 160
  2217. [ 11.269658] calling 77_dapm_post_sequence_async+0x0/0xd8 @ 161
  2218. [ 11.269666] initcall 76_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2219. [ 11.269674] initcall 77_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2220. [ 11.317733] async_continuing @ 1 after 0 usec
  2221. [ 11.322589] async_waiting @ 1
  2222. [ 11.322603] calling 78_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2223. [ 11.322612] initcall 78_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2224. [ 11.322623] calling 79_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2225. [ 11.322631] calling 80_dapm_pre_sequence_async+0x0/0xa0 @ 161
  2226. [ 11.322639] initcall 79_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2227. [ 11.322648] initcall 80_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2228. [ 11.370124] async_continuing @ 1 after 0 usec
  2229. [ 11.374961] async_waiting @ 1
  2230. [ 11.374975] calling 81_dapm_post_sequence_async+0x0/0xd8 @ 161
  2231. [ 11.374984] initcall 81_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2232. [ 11.374994] calling 82_dapm_post_sequence_async+0x0/0xd8 @ 160
  2233. [ 11.375004] calling 83_dapm_post_sequence_async+0x0/0xd8 @ 5
  2234. [ 11.375012] initcall 82_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2235. [ 11.375021] initcall 83_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2236. [ 11.422880] async_continuing @ 1 after 0 usec
  2237. [ 11.428062] async_waiting @ 1
  2238. [ 11.428076] calling 84_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2239. [ 11.428085] initcall 84_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2240. [ 11.428095] calling 85_dapm_pre_sequence_async+0x0/0xa0 @ 160
  2241. [ 11.428103] calling 86_dapm_pre_sequence_async+0x0/0xa0 @ 5
  2242. [ 11.428111] initcall 85_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2243. [ 11.428120] initcall 86_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  2244. [ 11.475213] async_continuing @ 1 after 0 usec
  2245. [ 11.480064] async_waiting @ 1
  2246. [ 11.480078] calling 87_dapm_post_sequence_async+0x0/0xd8 @ 5
  2247. [ 11.480087] initcall 87_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2248. [ 11.480099] calling 88_dapm_post_sequence_async+0x0/0xd8 @ 160
  2249. [ 11.480108] calling 89_dapm_post_sequence_async+0x0/0xd8 @ 5
  2250. [ 11.480116] initcall 88_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2251. [ 11.480125] initcall 89_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  2252. [ 11.527792] async_continuing @ 1 after 0 usec
  2253. [ 11.532662] initcall sunxi_sndhdmi_init+0x0/0x34 returned 0 after 419061 usecs
  2254. [ 11.540686] calling sock_diag_init+0x0/0x54 @ 1
  2255. [ 11.545859] initcall sock_diag_init+0x0/0x54 returned 0 after 52 usecs
  2256. [ 11.553114] calling flow_cache_init_global+0x0/0x1b0 @ 1
  2257. [ 11.559193] initcall flow_cache_init_global+0x0/0x1b0 returned 0 after 87 usecs
  2258. [ 11.567315] calling blackhole_module_init+0x0/0x1c @ 1
  2259. [ 11.573131] initcall blackhole_module_init+0x0/0x1c returned 0 after 2 usecs
  2260. [ 11.580963] calling cbq_module_init+0x0/0x1c @ 1
  2261. [ 11.586180] initcall cbq_module_init+0x0/0x1c returned 0 after 1 usecs
  2262. [ 11.593431] calling htb_module_init+0x0/0x1c @ 1
  2263. [ 11.598647] initcall htb_module_init+0x0/0x1c returned 0 after 1 usecs
  2264. [ 11.605899] calling tbf_module_init+0x0/0x1c @ 1
  2265. [ 11.611128] initcall tbf_module_init+0x0/0x1c returned 0 after 1 usecs
  2266. [ 11.618367] calling prio_module_init+0x0/0x1c @ 1
  2267. [ 11.623692] initcall prio_module_init+0x0/0x1c returned 0 after 1 usecs
  2268. [ 11.631038] calling sysctl_ipv4_init+0x0/0x9c @ 1
  2269. [ 11.636489] initcall sysctl_ipv4_init+0x0/0x9c returned 0 after 135 usecs
  2270. [ 11.644032] calling ipip_init+0x0/0x68 @ 1
  2271. [ 11.648666] IPv4 over IPv4 tunneling driver
  2272. [ 11.653685] initcall ipip_init+0x0/0x68 returned 0 after 4897 usecs
  2273. [ 11.660655] calling init_syncookies+0x0/0x24 @ 1
  2274. [ 11.665951] initcall init_syncookies+0x0/0x24 returned 0 after 79 usecs
  2275. [ 11.673300] calling ah4_init+0x0/0x80 @ 1
  2276. [ 11.677843] initcall ah4_init+0x0/0x80 returned 0 after 3 usecs
  2277. [ 11.684419] calling esp4_init+0x0/0x80 @ 1
  2278. [ 11.689056] initcall esp4_init+0x0/0x80 returned 0 after 1 usecs
  2279. [ 11.695729] calling ipcomp4_init+0x0/0x80 @ 1
  2280. [ 11.700669] initcall ipcomp4_init+0x0/0x80 returned 0 after 1 usecs
  2281. [ 11.707617] calling ipip_init+0x0/0xb0 @ 1
  2282. [ 11.712268] initcall ipip_init+0x0/0xb0 returned 0 after 2 usecs
  2283. [ 11.718928] calling xfrm4_beet_init+0x0/0x20 @ 1
  2284. [ 11.724157] initcall xfrm4_beet_init+0x0/0x20 returned 0 after 1 usecs
  2285. [ 11.731408] calling tunnel4_init+0x0/0x74 @ 1
  2286. [ 11.736334] initcall tunnel4_init+0x0/0x74 returned 0 after 1 usecs
  2287. [ 11.743295] calling xfrm4_transport_init+0x0/0x20 @ 1
  2288. [ 11.748993] initcall xfrm4_transport_init+0x0/0x20 returned 0 after 1 usecs
  2289. [ 11.756725] calling xfrm4_mode_tunnel_init+0x0/0x20 @ 1
  2290. [ 11.762628] initcall xfrm4_mode_tunnel_init+0x0/0x20 returned 0 after 0 usecs
  2291. [ 11.770556] calling ipv4_netfilter_init+0x0/0x24 @ 1
  2292. [ 11.776158] initcall ipv4_netfilter_init+0x0/0x24 returned 0 after 2 usecs
  2293. [ 11.783794] calling bictcp_register+0x0/0x1c @ 1
  2294. [ 11.789008] TCP: bic registered
  2295. [ 11.792501] initcall bictcp_register+0x0/0x1c returned 0 after 3410 usecs
  2296. [ 11.800041] calling cubictcp_register+0x0/0x78 @ 1
  2297. [ 11.805446] TCP: cubic registered
  2298. [ 11.809118] initcall cubictcp_register+0x0/0x78 returned 0 after 3584 usecs
  2299. [ 11.816851] calling tcp_westwood_register+0x0/0x1c @ 1
  2300. [ 11.822654] TCP: westwood registered
  2301. [ 11.826616] initcall tcp_westwood_register+0x0/0x1c returned 0 after 3866 usecs
  2302. [ 11.834738] calling hstcp_register+0x0/0x1c @ 1
  2303. [ 11.839854] TCP: highspeed registered
  2304. [ 11.843925] initcall hstcp_register+0x0/0x1c returned 0 after 3973 usecs
  2305. [ 11.851367] calling hybla_register+0x0/0x1c @ 1
  2306. [ 11.856483] TCP: hybla registered
  2307. [ 11.860168] initcall hybla_register+0x0/0x1c returned 0 after 3596 usecs
  2308. [ 11.867598] calling htcp_register+0x0/0x1c @ 1
  2309. [ 11.872631] TCP: htcp registered
  2310. [ 11.876207] initcall htcp_register+0x0/0x1c returned 0 after 3490 usecs
  2311. [ 11.883554] calling tcp_vegas_register+0x0/0x20 @ 1
  2312. [ 11.889055] TCP: vegas registered
  2313. [ 11.892741] initcall tcp_vegas_register+0x0/0x20 returned 0 after 3596 usecs
  2314. [ 11.900570] calling tcp_veno_register+0x0/0x20 @ 1
  2315. [ 11.905975] TCP: veno registered
  2316. [ 11.909550] initcall tcp_veno_register+0x0/0x20 returned 0 after 3489 usecs
  2317. [ 11.917283] calling tcp_scalable_register+0x0/0x1c @ 1
  2318. [ 11.923088] TCP: scalable registered
  2319. [ 11.927050] initcall tcp_scalable_register+0x0/0x1c returned 0 after 3866 usecs
  2320. [ 11.935168] calling tcp_lp_register+0x0/0x1c @ 1
  2321. [ 11.940394] TCP: lp registered
  2322. [ 11.943777] initcall tcp_lp_register+0x0/0x1c returned 0 after 3302 usecs
  2323. [ 11.951317] calling tcp_yeah_register+0x0/0x20 @ 1
  2324. [ 11.956722] TCP: yeah registered
  2325. [ 11.960311] initcall tcp_yeah_register+0x0/0x20 returned 0 after 3502 usecs
  2326. [ 11.968030] calling tcp_illinois_register+0x0/0x1c @ 1
  2327. [ 11.973834] TCP: illinois registered
  2328. [ 11.977796] initcall tcp_illinois_register+0x0/0x1c returned 0 after 3867 usecs
  2329. [ 11.985940] calling xfrm_user_init+0x0/0x50 @ 1
  2330. [ 11.991072] Initializing XFRM netlink socket
  2331. [ 11.995821] initcall xfrm_user_init+0x0/0x50 returned 0 after 4634 usecs
  2332. [ 12.003267] calling inet6_init+0x0/0x2cc @ 1
  2333. [ 12.008505] NET: Registered protocol family 10
  2334. [ 12.014343] initcall inet6_init+0x0/0x2cc returned 0 after 6096 usecs
  2335. [ 12.021513] calling packet_init+0x0/0x50 @ 1
  2336. [ 12.026341] NET: Registered protocol family 17
  2337. [ 12.031300] initcall packet_init+0x0/0x50 returned 0 after 4840 usecs
  2338. [ 12.038442] calling ipsec_pfkey_init+0x0/0x80 @ 1
  2339. [ 12.043776] NET: Registered protocol family 15
  2340. [ 12.048703] initcall ipsec_pfkey_init+0x0/0x80 returned 0 after 4820 usecs
  2341. [ 12.056341] calling rfcomm_init+0x0/0x10c @ 1
  2342. [ 12.061448] Bluetooth: RFCOMM TTY layer initialized
  2343. [ 12.066863] Bluetooth: RFCOMM socket layer initialized
  2344. [ 12.072575] Bluetooth: RFCOMM ver 1.11
  2345. [ 12.076730] initcall rfcomm_init+0x0/0x10c returned 0 after 15089 usecs
  2346. [ 12.084079] calling bnep_init+0x0/0x90 @ 1
  2347. [ 12.088713] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2348. [ 12.094619] Bluetooth: BNEP filters: protocol multicast
  2349. [ 12.100428] initcall bnep_init+0x0/0x90 returned 0 after 11437 usecs
  2350. [ 12.107473] calling hidp_init+0x0/0x5c @ 1
  2351. [ 12.112121] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  2352. [ 12.118769] initcall hidp_init+0x0/0x5c returned 0 after 6490 usecs
  2353. [ 12.125735] calling init_rpcsec_gss+0x0/0x6c @ 1
  2354. [ 12.131003] initcall init_rpcsec_gss+0x0/0x6c returned 0 after 41 usecs
  2355. [ 12.138330] calling init_kerberos_module+0x0/0x34 @ 1
  2356. [ 12.144049] initcall init_kerberos_module+0x0/0x34 returned 0 after 6 usecs
  2357. [ 12.151783] calling rfkill_gpio_driver_init+0x0/0x1c @ 1
  2358. [ 12.157896] initcall rfkill_gpio_driver_init+0x0/0x1c returned 0 after 122 usecs
  2359. [ 12.166113] calling init_dns_resolver+0x0/0x150 @ 1
  2360. [ 12.171629] Registering the dns_resolver key type
  2361. [ 12.176878] initcall init_dns_resolver+0x0/0x150 returned 0 after 5122 usecs
  2362. [ 12.184710] calling init_ceph_lib+0x0/0x74 @ 1
  2363. [ 12.189761] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
  2364. [ 12.196534] initcall init_ceph_lib+0x0/0x74 returned 0 after 6642 usecs
  2365. [ 12.204096] calling vfp_init+0x0/0x18c @ 1
  2366. [ 12.208750] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  2367. [ 12.217271] initcall vfp_init+0x0/0x18c returned 0 after 8337 usecs
  2368. [ 12.224236] calling thumbee_init+0x0/0x64 @ 1
  2369. [ 12.229159] ThumbEE CPU extension supported.
  2370. [ 12.233904] initcall thumbee_init+0x0/0x64 returned 0 after 4630 usecs
  2371. [ 12.241158] calling swp_emulation_init+0x0/0x5c @ 1
  2372. [ 12.246672] Registering SWP/SWPB emulation handler
  2373. [ 12.251999] initcall swp_emulation_init+0x0/0x5c returned 0 after 5211 usecs
  2374. [ 12.259817] calling sram_proc_init+0x0/0x5c @ 1
  2375. [ 12.264959] initcall sram_proc_init+0x0/0x5c returned 0 after 12 usecs
  2376. [ 12.272212] calling sunxi_bootup_extend_init+0x0/0x80 @ 1
  2377. [ 12.278301] sunxi_bootup_extend_init: bootup extend disable(default)
  2378. [ 12.285361] initcall sunxi_bootup_extend_init+0x0/0x80 returned -1 after 6901 usecs
  2379. [ 12.293868] initcall sunxi_bootup_extend_init+0x0/0x80 returned with error code -1
  2380. [ 12.302374] calling init_oops_id+0x0/0x4c @ 1
  2381. [ 12.307311] initcall init_oops_id+0x0/0x4c returned 0 after 11 usecs
  2382. [ 12.314371] calling printk_late_init+0x0/0x78 @ 1
  2383. [ 12.319685] initcall printk_late_init+0x0/0x78 returned 0 after 2 usecs
  2384. [ 12.327033] calling sched_init_debug+0x0/0x40 @ 1
  2385. [ 12.332370] initcall sched_init_debug+0x0/0x40 returned 0 after 11 usecs
  2386. [ 12.339801] calling pm_qos_power_init+0x0/0x68 @ 1
  2387. [ 12.345603] initcall pm_qos_power_init+0x0/0x68 returned 0 after 348 usecs
  2388. [ 12.353254] calling pm_debugfs_init+0x0/0x40 @ 1
  2389. [ 12.358480] initcall pm_debugfs_init+0x0/0x40 returned 0 after 9 usecs
  2390. [ 12.365733] calling wakeup_reason_init+0x0/0xc0 @ 1
  2391. [ 12.371264] initcall wakeup_reason_init+0x0/0xc0 returned 0 after 13 usecs
  2392. [ 12.378889] calling taskstats_init+0x0/0x88 @ 1
  2393. [ 12.384039] registered taskstats version 1
  2394. [ 12.388580] initcall taskstats_init+0x0/0x88 returned 0 after 4454 usecs
  2395. [ 12.396027] calling clear_boot_tracer+0x0/0x3c @ 1
  2396. [ 12.401448] initcall clear_boot_tracer+0x0/0x3c returned 0 after 0 usecs
  2397. [ 12.408879] calling add_shrinker_debug+0x0/0x40 @ 1
  2398. [ 12.414405] initcall add_shrinker_debug+0x0/0x40 returned 0 after 9 usecs
  2399. [ 12.421948] calling max_swapfiles_check+0x0/0x14 @ 1
  2400. [ 12.427548] initcall max_swapfiles_check+0x0/0x14 returned 0 after 0 usecs
  2401. [ 12.435184] calling random32_reseed+0x0/0xb4 @ 1
  2402. [ 12.440490] initcall random32_reseed+0x0/0xb4 returned 0 after 82 usecs
  2403. [ 12.447825] calling hdmi_module_init+0x0/0x150 @ 1
  2404. [ 12.453618] cmdline,disp=3
  2405. [ 12.456723] [HDMI] power vcc-hdmi-18
  2406. [ 12.461100] initcall hdmi_module_init+0x0/0x150 returned 0 after 7665 usecs
  2407. [ 12.468822] calling regulator_init_complete+0x0/0x14c @ 1
  2408. [ 12.475464] initcall regulator_init_complete+0x0/0x14c returned 0 after 514 usecs
  2409. [ 12.483783] calling random_int_secret_init+0x0/0x24 @ 1
  2410. [ 12.489710] initcall random_int_secret_init+0x0/0x24 returned 0 after 36 usecs
  2411. [ 12.497736] calling deferred_probe_initcall+0x0/0x84 @ 1
  2412. [ 12.503866] initcall deferred_probe_initcall+0x0/0x84 returned 0 after 125 usecs
  2413. [ 12.512093] calling sync_debugfs_init+0x0/0x40 @ 1
  2414. [ 12.517514] initcall sync_debugfs_init+0x0/0x40 returned 0 after 12 usecs
  2415. [ 12.525060] calling scsi_complete_async_scans+0x0/0x11c @ 1
  2416. [ 12.531350] initcall scsi_complete_async_scans+0x0/0x11c returned 0 after 0 usecs
  2417. [ 12.539649] calling init_netconsole+0x0/0x210 @ 1
  2418. [ 12.545048] console [netcon0] enabled
  2419. [ 12.549104] netconsole: network logging started
  2420. [ 12.554154] initcall init_netconsole+0x0/0x210 returned 0 after 8964 usecs
  2421. [ 12.561793] calling rtc_hctosys+0x0/0x118 @ 1
  2422. [ 12.567039] rtc_gettime(333): read time 1970-1-1 1:0:22
  2423. [ 12.572886] rtc0 rtc0: setting system clock to 1970-01-01 01:00:22 UTC (3622)
  2424. [ 12.580814] initcall rtc_hctosys+0x0/0x118 returned 0 after 13764 usecs
  2425. [ 12.588149] calling android_bat_init+0x0/0x1c @ 1
  2426. [ 12.593579] initcall android_bat_init+0x0/0x1c returned 0 after 101 usecs
  2427. [ 12.601122] calling sunxi_ths_init+0x0/0x4f4 @ 1
  2428. [ 12.607177] initcall sunxi_ths_init+0x0/0x4f4 returned 0 after 816 usecs
  2429. [ 12.614631] calling sunxi_cpu_budget_cooling_init+0x0/0x444 @ 1
  2430. [ 12.621308] sunxi_get_soc_bin: slow chip
  2431. [ 12.626132] CPU Budget:Register notifier
  2432. [ 12.630544] CPU Budget:register Success
  2433. [ 12.634850] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  2434. [ 12.644835] initcall sunxi_cpu_budget_cooling_init+0x0/0x444 returned 0 after 22976 usecs
  2435. [ 12.653935] calling debug_init+0x0/0xfc @ 1
  2436. [ 12.658708] initcall debug_init+0x0/0xfc returned 0 after 38 usecs
  2437. [ 12.665576] calling clk_debug_init+0x0/0xc4 @ 1
  2438. [ 12.674318] initcall clk_debug_init+0x0/0xc4 returned 0 after 3514 usecs
  2439. [ 12.681787] calling debugfs_test_init+0x0/0x120 @ 1
  2440. [ 12.687344] initcall debugfs_test_init+0x0/0x120 returned 0 after 49 usecs
  2441. [ 12.694986] calling net_secret_init+0x0/0x24 @ 1
  2442. [ 12.700306] initcall net_secret_init+0x0/0x24 returned 0 after 49 usecs
  2443. [ 12.707643] calling tcp_congestion_default+0x0/0x1c @ 1
  2444. [ 12.713555] initcall tcp_congestion_default+0x0/0x1c returned 0 after 3 usecs
  2445. [ 12.721490] calling ip_auto_config+0x0/0xf08 @ 1
  2446. [ 12.726731] initcall ip_auto_config+0x0/0xf08 returned 0 after 24 usecs
  2447. [ 12.734084] calling gps_init+0x0/0x1b4 @ 1
  2448. [ 12.738725] =========GPS========= :gsp not used in configuration
  2449. [ 12.745401] initcall gps_init+0x0/0x1b4 returned -1 after 6522 usecs
  2450. [ 12.752459] initcall gps_init+0x0/0x1b4 returned with error code -1
  2451. [ 12.759505] calling alsa_sound_last_init+0x0/0x74 @ 1
  2452. [ 12.765212] ALSA device list:
  2453. [ 12.768497] #0: snddaudio
  2454. [ 12.771600] #1: sndhdmi
  2455. [ 12.774502] initcall alsa_sound_last_init+0x0/0x74 returned 0 after 9069 usecs
  2456. [ 12.782525] calling initialize_hashrnd+0x0/0x24 @ 1
  2457. [ 12.788039] initcall initialize_hashrnd+0x0/0x24 returned 0 after 10 usecs
  2458. [ 12.796245] async_waiting @ 1
  2459. [ 12.799533] async_continuing @ 1 after 1 usec
  2460. [ 12.890712] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  2461. [ 13.040543] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  2462. [ 13.070054] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
  2463. [ 13.151008] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
  2464. [ 13.159354] VFS: Mounted root (ext4 filesystem) on device 179:2.
  2465. [ 13.174265] devtmpfs: mounted
  2466. [ 13.177592] async_waiting @ 1
  2467. [ 13.180905] async_continuing @ 1 after 1 usec
  2468. [ 13.186236] Freeing init memory: 408K
  2469. [ 13.190370] Failed to execute /init. Attempting defaults...
  2470. [ 13.495892] systemd[1]: System time before build time, advancing clock.
  2471. [ 14.230293] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  2472. [ 14.250575] systemd[1]: Detected architecture arm.
  2473.  
  2474. Welcome to Ubuntu 16.04.1 LTS!
  2475.  
  2476. [ 14.281156] systemd[1]: Set hostname to <bpi-iot-ros-ai>.
  2477. [ 14.725432] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  2478. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  2479. [ 14.750235] systemd[1]: Reached target Swap.
  2480. [ OK ] Reached target Swap.
  2481. [ 14.770400] systemd[1]: Listening on Journal Socket (/dev/log).
  2482. [ OK ] Listening on Journal Socket (/dev/log).
  2483. [ 14.800369] systemd[1]: Listening on udev Control Socket.
  2484. [ OK ] Listening on udev Control Socket.
  2485. [ 14.830643] systemd[1]: Created slice User and Session Slice.
  2486. [ OK ] Created slice User and Session Slice.
  2487. [ 14.860464] systemd[1]: Listening on Journal Audit Socket.
  2488. [ OK ] Listening on Journal Audit Socket.
  2489. [ 14.890540] systemd[1]: Created slice System Slice.
  2490. [ OK ] Created slice System Slice.
  2491. [ 14.910608] systemd[1]: Created slice system-serial\x2dgetty.slice.
  2492. [ OK ] Created slice system-serial\x2dgetty.slice.
  2493. [ 14.940164] systemd[1]: Reached target User and Group Name Lookups.
  2494. [ OK ] Reached target User and Group Name Lookups.
  2495. [ 14.970742] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  2496. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  2497. [ 15.000310] systemd[1]: Listening on Syslog Socket.
  2498. [ OK ] Listening on Syslog Socket.
  2499. [ 15.020582] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  2500. [ OK ] Created slice system-systemd\x2dfsck.slice.
  2501. [ 15.050244] systemd[1]: Reached target Slices.
  2502. [ OK ] Reached target Slices.
  2503. [ 15.070467] systemd[1]: Listening on Journal Socket.
  2504. [ OK ] Listening on Journal Socket.
  2505. [ 15.160912] systemd[1]: Starting Load Kernel Modules...
  2506. Starting Load Kernel Modules...
  2507. [ 15.350433] systemd[1]: Mounting Debug File System...
  2508. Mounting Debug File System...
  2509. [ 15.541062] systemd[1]: Started Read required files in advance.
  2510. [ OK ] Started Read required files in advance.
  2511. [ 15.681273] systemd[1]: Starting Journal Service...
  2512. Starting Journal Service...
  2513. [ 15.821127] systemd[1]: Starting Set console keymap...
  2514. Starting Set console keymap...
  2515. [ 16.011197] systemd[1]: Started Braille Device Support.
  2516. [ OK ] Started Braille Device Support.
  2517. [ 16.181645] systemd[1]: Starting Uncomplicated firewall...
  2518. Starting Uncomplicated firewall...
  2519. [ 16.420712] systemd[1]: Mounting POSIX Message Queue File System...
  2520. Mounting POSIX Message Queue File System...
  2521. [ 16.561754] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  2522. Starting Create list of required st... nodes for the current kernel...
  2523. [ 16.590987] systemd[1]: Listening on fsck to fsckd communication Socket.
  2524. [ OK ] Listening on fsck to fsckd communication Socket.
  2525. [ 16.620603] systemd[1]: Reached target Remote File Systems (Pre).
  2526. [ OK ] Reached target Remote File Systems (Pre).
  2527. [ 16.650492] systemd[1]: Reached target Remote File Systems.
  2528. [ OK ] Reached target Remote File Systems.
  2529. [ 16.680478] systemd[1]: Reached target Encrypted Volumes.
  2530. [ OK ] Reached target Encrypted Volumes.
  2531. [ 16.811230] systemd[1]: Starting Nameserver information manager...
  2532. Starting Nameserver information manager...
  2533. [ 16.841035] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  2534. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  2535. [ 16.951520] systemd[1]: Starting Restore / save the current clock...
  2536. Starting Restore / save the current clock...
  2537. [ 16.981039] systemd[1]: Listening on udev Kernel Socket.
  2538. [ OK ] Listening on udev Kernel Socket.
  2539. [ 17.117475] systemd[1]: Mounted POSIX Message Queue File System.
  2540. [ OK ] Mounted POSIX Message Queue File System.
  2541. [ 17.150802] systemd[1]: Mounted Debug File System.
  2542. [ OK ] Mounted Debug File System.
  2543. [ 17.171365] systemd[1]: Started Journal Service.
  2544. [ OK ] Started Journal Service.
  2545. [ OK ] Started Load Kernel Modules.
  2546. [ OK ] Started Set console keymap.
  2547. [ OK ] Started Uncomplicated firewall.
  2548. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  2549. [ OK ] Started Restore / save the current clock.
  2550. [ OK ] Started Nameserver information manager.
  2551. Starting Create Static Device Nodes in /dev...
  2552. Mounting FUSE Control File System...
  2553. Starting Apply Kernel Variables...
  2554. Mounting Configuration File System...
  2555. [ OK ] Mounted FUSE Control File System.
  2556. [ OK ] Started Create Static Device Nodes in /dev.
  2557. [ OK ] Started Apply Kernel Variables.
  2558. [ OK ] Mounted Configuration File System.
  2559. Starting udev Kernel Device Manager...
  2560. [ OK ] Started udev Kernel Device Manager.
  2561. Starting Remount Root and Kernel File Systems...
  2562. [ 22.387012] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  2563. [ OK ] Started Remount Root and Kernel File Systems.
  2564. Starting Flush Journal to Persistent Storage...
  2565. Starting udev Coldplug all Devices...
  2566. Starting Load/Save Random Seed...
  2567. [ OK ] Reached target Local File Systems (Pre).
  2568. [ OK ] Started Load/Save Random Seed.
  2569. [ 23.488031] systemd-journald[191]: Received request to flush runtime journal from PID 1
  2570. [ OK ] Started Flush Journal to Persistent Storage.
  2571. [ 24.256768] calling spidev_init+0x0/0xc4 [spidev] @ 563
  2572. [ 24.264853] initcall spidev_init+0x0/0xc4 [spidev] returned 0 after 688 usecs
  2573. [ OK ] Started udev Coldplug all Devices.
  2574. [ OK ] Reached target Sound Card.
  2575. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  2576. [ 24.358906] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2577. [ 24.418282] calling option_driver_init+0x0/0x24 [option] @ 563
  2578. [ 24.430726] usbcore: registered new interface driver option
  2579. [ 24.439770] USB Serial support registered for GSM modem (1-port)
  2580. [ 24.447149] initcall option_driver_init+0x0/0x24 [option] returned 0 after 16277 usecs
  2581. [ 24.530793] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2582. [ 24.545399] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2583. [ 24.558150] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2584. [ 24.568832] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2585. [ 24.580619] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2586. [ 24.596746] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2587. [ 24.607948] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2588. [ 24.620730] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2589. [ 24.632309] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2590. [ 24.642734] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2591. [ 24.654545] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2592. [ 24.670789] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2593. [ 24.682883] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2594. [ 24.693714] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2595. [ OK [ 24.704881] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2596. ] Found device /dev/ttyS0.
  2597. [ 24.716360] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2598. [ 24.731060] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2599. [ 24.741915] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2600. [ OK ] Found device /dev/mmcblk0p1.
  2601. [ 24.755273] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2602. [ 24.769944] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2603. [ 24.781032] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2604. [ 24.793207] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2605. [ 24.807919] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2606. [ 24.820458] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2607. [ 24.832507] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2608. [ 24.843346] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2609. [ 24.864649] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2610. [ 24.875558] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2611. [ 24.887841] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2612. [ 24.898597] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2613. [ 24.910529] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2614. Starting File System Check on /d[ 24.922771] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2615. ev/mmcblk0p1...
  2616. [ 24.941240] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2617. [ 24.941877] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2618. [ 24.945355] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2619. [ 24.945899] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2620. [ 24.946664] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2621. [ 24.947236] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2622. [ 24.947761] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2623. [ 24.948188] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2624. [ 24.950152] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  2625. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  2626. [ OK ] Started File System Check Daemon to report status.
  2627. Starting Load/Save RF Kill Switch Status...
  2628. [ 25.394707] [rfkill]: rfkill set power 1
  2629. [ OK ] Started File System Check on /dev/mmcblk0p1.
  2630. Mounting /boot...
  2631. [ OK ] Started Load/Save RF Kill Switch Status.
  2632. [ OK ] Mounted /boot.
  2633. [ OK ] Reached target Local File Systems.
  2634. Starting Tell Plymouth To Write Out Runtime Data...
  2635. Starting LSB: AppArmor initialization...
  2636. Starting Create Volatile Files and Directories...
  2637. Starting Set console font and keymap...
  2638. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  2639. [ OK ] Started Create Volatile Files and Directories.
  2640. [ OK ] Started LSB: AppArmor initialization.
  2641. [ OK ] Started Set console font and keymap.
  2642. [ OK ] Created slice system-getty.slice.
  2643. Starting Raise network interfaces...
  2644. [ OK ] Reached target System Time Synchronized.
  2645. Starting Update UTMP about System Boot/Shutdown...
  2646. [ OK ] Started Update UTMP about System Boot/Shutdown.
  2647. [ OK ] Reached target System Initialization.
  2648. [ OK ] Started Daily Cleanup of Temporary Directories.
  2649. [ OK ] Listening on D-Bus System Message Bus Socket.
  2650. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  2651. [ OK ] Started Daily apt activities.
  2652. [ OK ] Started Trigger resolvconf update for networkd DNS.
  2653. Starting Socket activation for snappy daemon.
  2654. [ OK ] Listening on UUID daemon activation socket.
  2655. [ OK ] Listening on CUPS Scheduler.
  2656. [ OK ] Started CUPS Scheduler.
  2657. [ OK ] Reached target Paths.
  2658. [ OK ] Started Timer to automatically refresh installed snaps.
  2659. [ OK ] Reached target Timers.
  2660. [ OK ] Listening on Socket activation for snappy daemon.
  2661. [ OK ] Reached target Sockets.
  2662. [ OK ] Reached target Basic System.
  2663. [ OK ] Started crash report submission daemon.
  2664. Starting Modem Manager...
  2665. [ OK ] Started CUPS Scheduler.
  2666. Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
  2667. Starting Permit User Sessions...
  2668. Starting Avahi mDNS/DNS-SD Stack...
  2669. [ OK ] Started D-Bus System Message Bus.
  2670. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  2671. Starting Network Manager...
  2672. Starting System Logging Service...
  2673. Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
  2674. Starting Save/Restore Sound Card State...
  2675. Starting SSH key generation on first startup...
  2676. Starting LSB: daemon to balance interrupts for SMP systems...
  2677. Starting Accounts Service...
  2678. Starting LSB: Speech Dispatcher...
  2679. Starting Bluetooth service...
  2680. Starting Login Service...
  2681. [ OK ] Started Make remote CUPS printers available locally.
  2682. Starting LSB: automatic crash report generation...
  2683. [ OK ] Started Run anacron jobs.
  2684. [ OK ] Started Avahi DNS Configuration Daemon.
  2685. [ OK ] Started Regular background program processing daemon.
  2686. Starting LSB: Banana Pi init script...
  2687. [ OK ] Started Snappy daemon.
  2688. [ OK ] Started System Logging Service.
  2689. [ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
  2690. [ OK ] Started Permit User Sessions.
  2691. [ OK ] Started SSH key generation on first startup.
  2692. [ OK ] Started Save/Restore Sound Card State.
  2693. [ OK ] Started Raise network interfaces.
  2694. [ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
  2695. [ OK ] Started LSB: Speech Dispatcher.
  2696. [ OK ] Started LSB: daemon to balance interrupts for SMP systems.
  2697. [ OK ] Started LSB: automatic crash report generation.
  2698. [ OK ] Started Network Manager.
  2699. [ OK ] Started Bluetooth service.
  2700. [ OK ] Started Login Service.
  2701. Starting Hostname Service...
  2702. Starting Network Manager Script Dispatcher Service...
  2703. Starting Network Manager Wait Online...
  2704. Starting Authenticate and Authorize Users to Run Privileged Tasks...
  2705. [ OK ] Reached target Network.
  2706. Starting OpenBSD Secure Shell server...
  2707. Starting Light Display Manager...
  2708. [ OK ] Started Hostname Service.
  2709. [ 37.996497] gmac0: probed
  2710. [ 38.030617] gmac0 gmac0: eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (gmac0-0:00)
  2711. [ OK ] Started Network Manager Script Dispatcher Service.
  2712. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
  2713. [ OK ] Started Accounts Service.
  2714. [ OK ] Started Modem Manager.
  2715. [ OK ] Started Light Display Manager.
  2716. [ OK ] Started Network Manager Wait Online.
  2717. [ OK ] Reached target Network is Online.
  2718. Starting /etc/rc.local Compatibility...
  2719. Starting LSB: Start NTP daemon...
  2720. Starting LSB: disk temperature monitoring daemon...
  2721. [ OK ] Started OpenBSD Secure Shell server.
  2722. [ 39.687512] calling PVRSRVDrmInit+0x0/0x50 [pvrsrvkm] @ 1954
  2723. [ 39.698346] sunxi_get_soc_bin: slow chip
  2724. [ 39.702997] PVR_K:(Error): gpu_sgx54tf0_temp: tf0_temp in sys_config.fex is invalid!
  2725. [ 39.703024]
  2726. [ 39.713628] PVR_K:(Error): gpu_sgx54tf0_freq: tf0_freq in sys_config.fex is invalid!
  2727. [ 39.713654]
  2728. [ 39.724206] PVR_K:(Error): gpu_sgx54tf1_temp: tf1_temp in sys_config.fex is invalid!
  2729. [ 39.724227]
  2730. [ 39.734708] PVR_K:(Error): gpu_sgx54tf1_freq: tf1_freq in sys_config.fex is invalid!
  2731. [ 39.734726]
  2732. [ 39.748110] #PVR_DBG: SGX Core Version Information: SGX544
  2733. [ 39.754407] #PVR_DBG: SGX Multi-processor: 1 cores
  2734. [ 39.759843] #PVR_DBG: SGX Core Revision Information: 115
  2735. [ 39.765924] #PVR_DBG: SGX System Level Cache is present
  2736. [ 39.765939]
  2737. [ 39.773707] #PVR_DBG: SGX Initialisation Part 1
  2738. [ 39.779370] #####: Device 0: Framebuffer physical address: 0xb8200000
  2739. [ 39.786751] [drm] Initialized pvr 1.14.3841212 20110701 on minor 0
  2740. [ 39.794131] initcall PVRSRVDrmInit+0x0/0x50 [pvrsrvkm] returned 0 after 97375 usecs
  2741. [ OK ] Stopped Light Display Manager.
  2742. Starting Light Display Manager...
  2743. [ 40.126593] calling dhd_module_init+0x0/0x158 [bcmdhd] @ 1984
  2744. [ 40.133266] dhd_module_init: in
  2745. [ 40.136806] ======== bcm_wlan_set_plat_data ========
  2746. [ 40.142552] GPIO(WL_HOST_WAKE) = 355
  2747. [ 40.146745] host_oob_irq: 3
  2748. [ 40.150194] host_oob_irq_flags=1044
  2749. [ 40.154132] dhd_wifi_platform_load: Enter
  2750. [ 40.158686] Power-up adapter 'DHD generic adapter'
  2751. [ 40.164352] wifi_platform_set_power = 1
  2752. [ 40.168672] ======== PULL WL_REG_ON HIGH! ========
  2753. [ 40.174157] [wifi_pm]: wifi power on
  2754. [ OK ] Started LSB: disk temperature monitoring daemon.
  2755. [ 40.480103] wifi_platform_bus_enumerate device present 1
  2756. [ 40.486103] ======== Card detection to detect SDIO card! ========
  2757. [ 40.493154] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  2758. [ 40.504610] [mmc]: sdc1 power_supply is null
  2759. [ 40.530143] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  2760. [ 40.562520] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 1 err, cmd 52, RTO !!
  2761. [ 40.571743] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 1 err, cmd 52, RTO !!
  2762. [ 40.580175] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  2763. [ 40.593248] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  2764. [ 40.605778] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 1 err, cmd 8, RTO !!
  2765. [ 40.614053] *******************Try sdio*******************
  2766. [ 40.620703] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  2767. [ 40.641551] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  2768. [ 40.649548] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  2769. [ 40.657510] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  2770. [ 40.666902] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  2771. [ 40.770854] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  2772. [ 40.781502] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  2773. [ 40.792375] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  2774. [ 40.807602] mmc2: new high speed SDIO card at address 0001
  2775. [ 40.815919] *******************sdio init ok*******************
  2776. [ 40.832266] bcmsdh_register: register client driver
  2777. [ 40.838040] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  2778. [ 40.843883] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  2779. [ 40.849358] bus num (host idx)=2, slot num (rca)=1
  2780. [ 40.854878] found adapter info 'DHD generic adapter'
  2781. [ 40.862043] dhdsdio_probe : no mutex held. set lock
  2782. [ 40.867924] F1 signature read @0x18000000=0x1540a9a6
  2783. [ 40.881205] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
  2784. [ 40.891475] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  2785. [ 40.899325] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
  2786. [ 40.905644] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
  2787. [ 40.932222] wl_create_event_handler(): thread:wl_event_handler:7d9 started
  2788. [ 40.932665] tsk Enter, tsk = 0xec5e1430
  2789. [ 40.947614] dhd_attach(): thread:dhd_watchdog_thread:7db started
  2790. [ 40.955034] dhd_attach(): thread:dhd_dpc:7dd started
  2791. [ 40.955111] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
  2792. [ 40.968662] dhd_attach(): thread:dhd_rxf:7de started
  2793. [ 40.974429] dhd_deferred_work_init: work queue initialized
  2794. [ 40.981593] dhdsdio_probe_init: set use_rxchain 1 from config.txt
  2795. [ 41.026828] Dongle Host Driver, version 1.201.59.3 (r506368)
  2796. [ 41.026849] Compiled in drivers/net/wireless/bcmdhd on Dec 13 2017 at 19:35:09
  2797. Starting Load/Save RF Kill Switc[ 41.045346] Register interface [wlan0] MAC: e0:76:d0:2d:df:63
  2798. h Status...
  2799. [ 41.045362]
  2800. [ 41.068125] dhd_prot_ioctl : bus is down. we have nothing to do
  2801. [ 41.075069] bcmsdh_oob_intr_unregister: Enter
  2802. [ 41.079972] bcmsdh_oob_intr_unregister: irq is not registered
  2803. [ 41.086654] dhd_txglom_enable: enable 0
  2804. [ 41.091097] dhd_bus_devreset: WLAN OFF DONE
  2805. [ 41.096128] wifi_platform_set_power = 0
  2806. [ 41.101512] ======== PULL WL_REG_ON LOW! ========
  2807. [ 41.106859] [wifi_pm]: wifi power off
  2808. [ 41.106894] dhdsdio_probe : the lock is released.
  2809. [ 41.107234] dhd_module_init: Exit err=0
  2810. [ 41.107568] initcall dhd_module_init+0x0/0x158 [bcmdhd] returned 0 after 951167 usecs
  2811. [ OK ] Started Light Display Manager.
  2812. [ 41.157524] PVR_K: UM DDK-(3841212) and KM DDK-(3841212) match. [ OK ]
  2813. [ 41.165479] #PVR_DBG: SGXGetInfoForSrvinit
  2814. [ 41.222367] dhd_open: Enter ee0dd800
  2815. [ 41.226433]
  2816. [ 41.226447] Dongle Host Driver, version 1.201.59.3 (r506368)
  2817. [ 41.226461] Compiled in drivers/net/wireless/bcmdhd on Dec 13 2017 at 19:35:09
  2818. [ 41.232075] #PVR_DBG: SGX Initialisation Part 2
  2819. [ 41.232190] #PVR_DBG: Initialise Kernel CCB
  2820. [ 41.232420] #PVR_DBG: Initialise Kernel CCB Control
  2821. [ 41.232541] #PVR_DBG: Initialise Kernel CCB Event Kicker
  2822. [ 41.233674] #PVR_DBG: SGX initialisation script part 1
  2823. [ 41.233729] #PVR_DBG: SGXRunScript: Write HW reg operation
  2824. [ 41.233779] #PVR_DBG: WRW: SGXREG: Reg: 0x00004000 Data: 0x00000000
  2825. [ 41.233833] #PVR_DBG: SGXRunScript: Read HW reg operation
  2826. [ 41.233882] #PVR_DBG: RDW: SGXREG: Reg: 0x00004000
  2827. [ 41.233931] #PVR_DBG: SGXRunScript: Write HW reg operation
  2828. [ 41.233994] #PVR_DBG: WRW: SGXREG: Reg: 0x00004020 Data: 0x000002AA
  2829. [ 41.234044] #PVR_DBG: SGXRunScript: Read HW reg operation
  2830. [ 41.234078] #PVR_DBG: RDW: SGXREG: Reg: 0x00004020
  2831. [ 41.234119] #PVR_DBG: SGXRunScript: Write HW reg operation
  2832. [ 41.234156] #PVR_DBG: WRW: SGXREG: Reg: 0x00004004 Data: 0x00000002
  2833. [ 41.234200] #PVR_DBG: End of SGX initialisation script part 1
  2834. [ 41.235001] #PVR_DBG: SGX initialisation script part 2
  2835. [ 41.235039] #PVR_DBG: SGXRunScript: Write HW reg operation
  2836. [ 41.235075] #PVR_DBG: WRW: SGXREG: Reg: 0x00000130 Data: 0x00004000
  2837. [ 41.235126] #PVR_DBG: SGXRunScript: Write HW reg operation
  2838. [ 41.235172] #PVR_DBG: WRW: SGXREG: Reg: 0x00000110 Data: 0x00000000
  2839. [ 41.235230] #PVR_DBG: SGXRunScript: Write HW reg operation
  2840. [ 41.235283] #PVR_DBG: WRW: SGXREG: Reg: 0x0000013C Data: 0x00000000
  2841. [ 41.235342] #PVR_DBG: SGXRunScript: Write HW reg operation
  2842. [ 41.235390] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A7C Data: 0x00000000
  2843. [ 41.235441] #PVR_DBG: SGXRunScript: Write HW reg operation
  2844. [ 41.235492] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A80 Data: 0x00000000
  2845. [ 41.235541] #PVR_DBG: SGXRunScript: Write HW reg operation
  2846. [ 41.235581] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A74 Data: 0x00208200
  2847. [ 41.235629] #PVR_DBG: SGXRunScript: Write HW reg operation
  2848. [ 41.235669] #PVR_DBG: WRW: SGXREG: Reg: 0x00000ABC Data: 0x00000040
  2849. [ 41.235722] #PVR_DBG: SGXRunScript: Write HW reg operation
  2850. [ 41.235762] #PVR_DBG: WRW: SGXREG: Reg: 0x00000AB8 Data: 0x00000001
  2851. [ 41.235802] #PVR_DBG: SGXRunScript: Write HW reg operation
  2852. [ 41.235836] #PVR_DBG: WRW: SGXREG: Reg: 0x00000800 Data: 0x00000010
  2853. [ 41.235884] #PVR_DBG: SGXRunScript: Write HW reg operation
  2854. [ 41.235929] #PVR_DBG: WRW: SGXREG: Reg: 0x00000818 Data: 0x00000000
  2855. [ 41.235980] #PVR_DBG: SGXRunScript: Write HW reg operation
  2856. [ 41.236021] #PVR_DBG: WRW: SGXREG: Reg: 0x00000804 Data: 0x00000C00
  2857. [ 41.236071] #PVR_DBG: SGXRunScript: Write HW reg operation
  2858. [ 41.236106] #PVR_DBG: WRW: SGXREG: Reg: 0x00000814 Data: 0x0000FFFF
  2859. [ 41.236155] #PVR_DBG: SGXRunScript: Write HW reg operation
  2860. [ 41.236209] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A00 Data: 0x0007C000
  2861. [ 41.236258] #PVR_DBG: SGXRunScript: Write HW reg operation
  2862. [ 41.236294] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A0C Data: 0x07E40000
  2863. [ 41.236346] #PVR_DBG: SGXRunScript: Write HW reg operation
  2864. [ 41.236393] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A10 Data: 0x07E60000
  2865. [ 41.236448] #PVR_DBG: SGXRunScript: Write HW reg operation
  2866. [ 41.236500] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A14 Data: 0x07E80000
  2867. [ 41.236546] #PVR_DBG: SGXRunScript: Write HW reg operation
  2868. [ 41.236581] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A18 Data: 0x07EA0000
  2869. [ 41.236630] #PVR_DBG: SGXRunScript: Write HW reg operation
  2870. [ 41.236683] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A1C Data: 0x07EC0000
  2871. Starting WPA supplicant...[ 41.236737] #PVR_DBG: SGXRunScript: Write HW reg operation
  2872. [ 41.236786] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A20 Data: 0x07EE0000
  2873. [ 41.236827] #PVR_DBG: SGXRunScript: Write HW reg operation
  2874. [ 41.236867] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A24 Data: 0x07F00000
  2875. [ 41.236917] #PVR_DBG: SGXRunScript: Write HW reg operation
  2876.  
  2877. [ 41.236964] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A28 Data: 0x07F20000
  2878. [ 41.237013] #PVR_DBG: SGXRunScript: Write HW reg operation
  2879. [ 41.237048] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A2C Data: 0x07F40000
  2880. [ 41.237088] #PVR_DBG: SGXRunScript: Write HW reg operation
  2881. [ 41.237123] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A30 Data: 0x07F60000
  2882. [ 41.237167] #PVR_DBG: SGXRunScript: Write HW reg operation
  2883. [ 41.237207] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A34 Data: 0x03F80000
  2884. [ 41.237246] #PVR_DBG: SGXRunScript: Write HW reg operation
  2885. [ 41.237283] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A38 Data: 0x03FA0000
  2886. [ 41.237331] #PVR_DBG: SGXRunScript: Write HW reg operation
  2887. [ 41.237367] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A3C Data: 0x03FC0000
  2888. [ 41.237404] #PVR_DBG: SGXRunScript: Write HW reg operation
  2889. [ 41.237439] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A40 Data: 0x03FE0000
  2890. [ 41.237489] #PVR_DBG: SGXRunScript: Write HW reg operation
  2891. [ 41.237526] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A48 Data: 0x0FC80000
  2892. [ 41.237567] #PVR_DBG: SGXRunScript: Write HW reg operation
  2893. [ 41.237621] #PVR_DBG: WRW: SGXREG: Reg: 0x00000B30 Data: 0x00000100
  2894. [ 41.237671] #PVR_DBG: SGXRunScript: Write HW reg operation
  2895. [ 41.237709] #PVR_DBG: WRW: SGXREG: Reg: 0x00000AC4 Data: 0xF4002010
  2896. [ 41.237753] #PVR_DBG: SGXRunScript: Write HW reg operation
  2897. [ 41.237801] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A68 Data: 0xF2016CC0
  2898. [ 41.237850] #PVR_DBG: SGXRunScript: Write HW reg operation
  2899. [ 41.237897] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A6C Data: 0x00000003
  2900. [ 41.237937] #PVR_DBG: SGXRunScript: Write HW reg operation
  2901. [ 41.237970] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A70 Data: 0x00012001
  2902. [ 41.238009] #PVR_DBG: SGXRunScript: Write HW reg operation
  2903. [ 41.238045] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A68 Data: 0xF2016D10
  2904. [ 41.238083] #PVR_DBG: SGXRunScript: Write HW reg operation
  2905. [ 41.238118] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A6C Data: 0x00000001
  2906. [ 41.238156] #PVR_DBG: SGXRunScript: Write HW reg operation
  2907. [ 41.238192] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A70 Data: 0x00012001
  2908. [ 41.238229] #PVR_[ OK ] Started Load/Save RF Kill Switch Status.
  2909. DBG: SGXRunScript: Write HW reg operation
  2910. [ 41.238264] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A58 Data: 0x2200C000
  2911. [ 41.238307] #PVR_DBG: SGXRunScript: Write HW reg operation
  2912. [ 41.238343] #PVR_DBG: WRW: SGXREG: Reg: 0x00004A58 Data: 0x0804300F
  2913. [ 41.238392] #PVR_DBG: SGXRunScript: Write HW reg operation
  2914. [ 41.238444] #PVR_DBG: WRW: SGXREG: Reg: 0x00004808 Data: 0x00000004
  2915. [ 41.238490] #PVR_DBG: SGXRunScript: Write HW reg operation
  2916. [ 41.238535] #PVR_DBG: WRW: SGXREG: Reg: 0x00004144 Data: 0x000003E8
  2917. [ 41.238574] #PVR_DBG: SGXRunScript: Write HW reg operation
  2918. [ 41.238609] #PVR_DBG: WRW: SGXREG: Reg: 0x0000414C Data: 0x00000000
  2919. [ 41.238658] #PVR_DBG: SGXRunScript: Write HW reg operation
  2920. [ 41.238704] #PVR_DBG: WRW: SGXREG: Reg: 0x00008BA0 Data: 0x000005A6
  2921. [ 41.238745] #PVR_DBG: SGXRunScript: Write HW reg operation
  2922. [ 41.238779] #PVR_DBG: WRW: SGXREG: Reg: 0x00000BB4 Data: 0x00000000
  2923. [ 41.238821] #PVR_DBG: End of SGX initialisation script part 2
  2924. [ 41.238860] #PVR_DBG: Reset the SGX microkernel initialisation status
  2925. [ 41.238982] #PVR_DBG: Initialise the microkernel
  2926. [ 41.239099] #PVR_DBG: Wait for the SGX microkernel initialisation to complete
  2927. [ 41.239310] #PVR_DBG: SGXRunScript: Write HW reg operation
  2928. [[ 41.239339] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A58 Data: 0x00000000
  2929. [ 41.239362] #PVR_DBG: SGXRunScript: Write HW reg operation
  2930. [ 41.239386] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A68 Data: 0x00000000
  2931. OK [ 41.239407] #PVR_DBG: SGXRunScript: Write HW reg operation
  2932. [ 41.239437] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A6C Data: 0x00000000
  2933. [ 41.239469] #PVR_DBG: SGXRunScript: Write HW reg operation
  2934. ] [ 41.239494] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A70 Data: 0x00000000
  2935. [ 41.239523] #PVR_DBG: SGXRunScript: Write HW reg operation
  2936. [ 41.239555] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A48 Data: 0x00000000
  2937. Started LSB: Start NTP daemon.[ 41.239585] #PVR_DBG: SGXRunScript: Write HW reg operation
  2938. [ 41.239617] #PVR_DBG: WRW: SGXREG: Re
  2939. g: 0x00000130 Data: 0x00000000
  2940. [ 41.239642] #PVR_DBG: SGXRunScript: Write HW reg operation
  2941. [ 41.239665] #PVR_DBG: WRW: SGXREG: Reg: 0x00000110 Data: 0x00000000
  2942. [ 41.239688] #PVR_DBG: SGXRunScript: Write HW reg operation
  2943. [ 41.239710] #PVR_DBG: WRW: SGXREG: Reg: 0x00000000 Data: 0x00000000
  2944. [ 41.239733] #PVR_DBG: SGXRunScript: Write HW reg operation
  2945. [ 41.239755] #PVR_DBG: WRW: SGXREG: Reg: 0x00000004 Data: 0x00000000
  2946. [ 41.239777] #PVR_DBG: SGXRunScript: Write HW reg operation
  2947. [ 41.239800] #PVR_DBG: WRW: SGXREG: Reg: 0x00004004 Data: 0x00000000
  2948. [ 41.239831] #PVR_DBG: SGXRunScript: Write HW reg operation
  2949. [ 41.239865] #PVR_DBG: WRW: SGXREG: Reg: 0x00004020 Data: 0x00000000
  2950. [ 41.239890] #PVR_DBG: SGXRunScript: Write HW reg operation
  2951. [ 41.239913] #PVR_DBG: WRW: SGXREG: Reg: 0x00004000 Data: 0x00000000
  2952. [ 41.239984] #PVR_DBG: Microkernel kick for SGXGetMiscInfo
  2953. [ 41.240273] #PVR_DBG: SGX initialisation script part 1
  2954. [ 41.240304] #PVR_DBG: SGXRunScript: Write HW reg operation
  2955. [ 41.240340] #PVR_DBG: WRW: SGXREG: Reg: 0x00004000 Data: 0x00000000
  2956. [ 41.240375] #PVR_DBG: SGXRunScript: Read HW reg operation
  2957. [ 41.240410] #PVR_DBG: RDW: SGXREG: Reg: 0x00004000
  2958. [ 41.240438] #PVR_DBG: SGXRunScript: Write HW reg operation
  2959. [ 41.240469] #PVR_DBG: WRW: SGXREG: Reg: 0x00004020 Data: 0x000002AA
  2960. [ 41.240500] #PVR_DBG: SGXRunScript: Read HW reg operation
  2961. [ 41.240532] #PVR_DBG: RDW: SGXREG: Reg: 0x00004020
  2962. [ 41.240562] #PVR_DBG: SGXRunScript: Write HW reg operation
  2963. [ 41.240595] #PVR_DBG: WRW: SGXREG: Reg: 0x00004004 Data: 0x00000002
  2964. [ 41.240626] #PVR_DBG: End of SGX initialisation script part 1
  2965. [ 41.240682] #PVR_DBG: SGX initialisation script part 2
  2966. [ 41.240707] #PVR_DBG: SGXRunScript: Write HW reg operation
  2967. [ 41.240738] #PVR_DBG: WRW: SGXREG: Reg: 0x00000130 Data: 0x00004000
  2968. [ 41.240768] #PVR_DBG: SGXRunScript: Write HW reg operation
  2969. [ 41.240801] #PVR_DBG: WRW: SGXREG: Reg: 0x00000110 Data: 0x00000000
  2970. [ 41.240833] #PVR_DBG: SGXRunScript: Write HW reg operation
  2971. [ 41.240856] #PVR_DBG: WRW: SGXREG: Reg: 0x0000013C Data: 0x00000000
  2972. [ 41.240879] #PVR_DBG: SGXRunScript: Write HW reg operation
  2973. [ 41.240902] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A7C Data: 0x00000000
  2974. [ 41.240926] #PVR_DBG: SGXRunScript: Write HW reg operation
  2975. [ 41.240952] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A80 Data: 0x00000000
  2976. [ 41.240984] #PVR_DBG: SGXRunScript: Write HW reg operation
  2977. [ 41.241016] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A74 Data: 0x00208200
  2978. [ 41.241045] #PVR_DBG: SGXRunScript: Write HW reg operation
  2979. [ 41.241072] #PVR_DBG: WRW: SGXREG: Reg: 0x00000ABC Data: 0x00000040
  2980. [ 41.241100] #PVR_DBG: SGXRunScript: Write HW reg operation
  2981. [ 41.241136] #PVR_DBG: WRW: SGXREG: Reg: 0x00000AB8 Data: 0x00000001
  2982. [ 41.241166] #PVR_DBG: SGXRunScript: Write HW reg operation
  2983. [ 41.241192] #PVR_DBG: WRW: SGXREG: Reg: 0x00000800 Data: 0x00000010
  2984. [ 41.241214] #PVR_DBG: SGXRunScript: Write HW reg operation
  2985. [ 41.241244] #PVR_DBG: WRW: SGXREG: Reg: 0x00000818 Data: 0x00000000
  2986. [ 41.241274] #PVR_DBG: SGXRunScript: Write HW reg operation
  2987. [ 41.241305] #PVR_DBG: WRW: SGXREG: Reg: 0x00000804 Data: 0x00000C00
  2988. [ 41.241340] #PVR_DBG: SGXRunScript: Write HW reg operation
  2989. [ 41.241369] #PVR_DBG: WRW: SGXREG: Reg: 0x00000814 Data: 0x0000FFFF
  2990. [ 41.241396] #PVR_DBG: SGXRunScript: Write HW reg operation
  2991. [ 41.241433] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A00 Data: 0x0007C000
  2992. [ 41.241464] #PVR_DBG: SGXRunScript: Write HW reg operation
  2993. [ 41.241495] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A0C Data: 0x07E40000
  2994. [ 41.241518] #PVR_DBG: SGXRunScript: Write HW reg operation
  2995. [ 41.241548] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A10 Data: 0x07E60000
  2996. [ 41.241577] #PVR_DBG: SGXRunScript: Write HW reg operation
  2997. [ 41.241608] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A14 Data: 0x07E80000
  2998. [ 41.241638] #PVR_DBG: SGXRunScript: Write HW reg operation
  2999. [ 41.241670] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A18 Data: 0x07EA0000
  3000. [ 41.241695] #PVR_DBG: SGXRunScript: Write HW reg operation
  3001. [ 41.241719] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A1C Data: 0x07EC0000
  3002. [ 41.241743] #PVR_DBG: SGXRunScript: Write HW reg operation
  3003. [[ 41.241768] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A20 Data: 0x07EE0000
  3004. [ 41.241794] #PVR_DBG: SGXRunScript: Write HW reg operation
  3005. OK [ 41.241823] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A24 Data: 0x07F00000
  3006. [ 41.241852] #PVR_DBG: SGXRunScript: Write HW reg operation
  3007. ] [ 41.241879] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A28 Data: 0x07F20000
  3008. [ 41.241902] #PVR_DBG: SGXRunScript: Write HW reg operation
  3009. [ 41.241925] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A2C Data: 0x07F40000
  3010. Started LSB: Banana Pi init scri[ 41.241948] #PVR_DBG: SGXRunScript: Write HW reg operation
  3011. [ 41.241971] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A30 Data: 0x07F60000
  3012. [ 41.241994] #PVR_DBG: SGXRunScript: Write HW reg operation
  3013. pt.
  3014. [ 41.242017] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A34 Data: 0x03F80000
  3015. [ 41.242039] #PVR_DBG: SGXRunScript: Write HW reg operation
  3016. [ 41.242062] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A38 Data: 0x03FA0000
  3017. [ 41.242085] #PVR_DBG: SGXRunScript: Write HW reg operation
  3018. [ 41.242115] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A3C Data: 0x03FC0000
  3019. [ 41.242141] #PVR_DBG: SGXRunScript: Write HW reg operation
  3020. [ 41.242164] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A40 Data: 0x03FE0000
  3021. [ 41.242192] #PVR_DBG: SGXRunScript: Write HW reg operation
  3022. [ 41.242218] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A48 Data: 0x0FC80000
  3023. [ 41.242240] #PVR_DBG: SGXRunScript: Write HW reg operation
  3024. [ 41.242264] #PVR_DBG: WRW: SGXREG: Reg: 0x00000B30 Data: 0x00000100
  3025. [ 41.242287] #PVR_DBG: SGXRunScript: Write HW reg operation
  3026. [ 41.242321] #PVR_DBG: WRW: SGXREG: Reg: 0x00000AC4 Data: 0xF4002010
  3027. [ 41.242348] #PVR_DBG: SGXRunScript: Write HW reg operation
  3028. [ 41.242371] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A68 Data: 0xF2016CC0
  3029. [ 41.242393] #PVR_DBG: SGXRunScript: Write HW reg operation
  3030. [ 41.242416] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A6C Data: 0x00000003
  3031. [ 41.242447] #PVR_DBG: SGXRunScript: Write HW reg operation
  3032. [ 41.242473] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A70 Data: 0x00012001
  3033. [ 41.242501] #PVR_DBG: SGXRunScript: Write HW reg operation
  3034. [ 41.242528] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A68 Data: 0xF2016D10
  3035. [ 41.242551] #PVR_DBG: SGXRunScript: Write HW reg operation
  3036. [ 41.242579] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A6C Data: 0x00000001
  3037. [ 41.242605] #PVR_DBG: SGXRunScript: Write HW reg operation
  3038. [ 41.242635] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A70 Data: 0x00012001
  3039. [ 41.242663] #PVR_DBG: SGXRunScript: Write HW reg operation
  3040. [ 41.242689] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A58 Data: 0x2200C000
  3041. [ 41.242712] #PVR_DBG: SGXRunScript: Write HW reg operation
  3042. [ 41.242736] #PVR_DBG: WRW: SGXREG: Reg: 0x00004A58 Data: 0x0804300F
  3043. [ 41.242764] #PVR_DBG: SGXRunScript: Write HW reg operation
  3044. [ 41.242789] #PVR_DBG: WRW: SGXREG: Reg: 0x00004808 Data: 0x00000004
  3045. [ 41.242811] #PVR_DBG: SGXRunScript: Write HW reg operation
  3046. [ 41.242835] #PVR_DBG: WRW: SGXREG: Reg: 0x00004144 Data: 0x000003E8
  3047. [ 41.242858] #PVR_DBG: SGXRunScript: Write HW reg operation
  3048. [ 41.242888] #PVR_DBG: WRW: SGXREG: Reg: 0x0000414C Data: 0x00000000
  3049. [ 41.242912] #PVR_DBG: SGXRunScript: Write HW reg operation
  3050. [ 41.242942] #PVR_DBG: WRW: SGXREG: Reg: 0x00008BA0 Data: 0x000005A6
  3051. [ 41.242970] #PVR_DBG: SGXRunScript: Write HW reg operation
  3052. [ 41.243003] #PVR_DBG: WRW: SGXREG: Reg: 0x00000BB4 Data: 0x00000000
  3053. [ 41.243033] #PVR_DBG: End of SGX initialisation script part 2
  3054. [ 41.243063] #PVR_DBG: Reset the SGX microkernel initialisation status
  3055. [ 41.243095] #PVR_DBG: Initialise the microkernel
  3056. [ 41.243179] #PVR_DBG: Wait for the SGX microkernel initialisation to complete
  3057. [ 41.250001] PVR_K:(Error): PVRSRVOpenDCDeviceKM: Failed to open external DC device
  3058. [ 41.339420] wl_android_wifi_on in 1
  3059. [ 41.339449] wl_android_wifi_on in 2: g_wifi_on=0
  3060. [ 41.339470] wifi_platform_set_power = 1
  3061. [ 41.339493] ======== PULL WL_REG_ON HIGH! ========
  3062. [ 41.339515] [wifi_pm]: wifi power on
  3063. [ 41.640176] sdio_reset_comm():
  3064. [ 41.640220] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  3065. [ 41.642624] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  3066. [ 41.643862] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B
  3067. [ 41.644682] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B
  3068. [ 41.658570] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  3069. [ 41.660838] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  3070. [ 41.663129] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  3071. [ 41.667208] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  3072. [ 41.796313] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm O[ OK ] Started WPA supplicant.
  3073. N vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  3074. [ 41.796604] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  3075. [ 41.797026] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  3076. [ 41.798289]
  3077. [ 41.798299]
  3078. [ 41.798306] dhd_bus_devreset: == WLAN ON ==
  3079. [ 41.798558] F1 signature read @0x18000000=0x1540a9a6
  3080. [ 41.804671] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
  3081. [ 41.806931] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  3082. [ 41.807616] dhdsdio_probe_init: set use_rxchain 1 from config.txt
  3083. [ 41.808230] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
  3084. [ 41.808259] Final fw_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
  3085. [ 41.808278] Final nv_path=/lib/firmware/ap6212/nvram.txt
  3086. [ 41.808296] Final conf_path=/lib/firmware/ap6212/config.txt
  3087. [ 41.907857] NVRAM version: AP6212_NVRAM_V1.0_20140603
  3088. [ 41.909416] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  3089. [ 41.968667] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  3090. [ 41.968972] bcmsdh_oob_intr_register: Enter
  3091. [ 41.968992] bcmsdh_oob_intr_register: HW_OOB enabled
  3092. [ 41.969019] bcmsdh_oob_intr_register OOB irq=3 flags=414
  3093. [ 41.969277] bcmsdh_oob_intr_register: enable_irq_wake
  3094. [ 41.969304] bcmsdh_oob_intr_register: enable_irq_wake failed with -6
  3095. [ 41.972945] dhd_conf_set_band: Set band 0
  3096. [ 41.989128] Firmware up: op_mode=0x0001, MAC=e0:76:d0:2d:df:63
  3097. [ 41.989163] dhd_conf_set_country: Set country CN, revision 0
  3098. [ 42.054270] Country code: CN (CN/0)
  3099. [ 42.055293] dhd_conf_set_roam: Set roam_off 1
  3100. [ 42.267946] Firmware version = wl0: Jul 18 2014 18:24:48 version 7.10.226.54.x2 (A0 Station) FWID 01-2faae407
  3101. [ 42.267988] Driver: 1.201.59.3 (r506368)
  3102. [ 42.267999] Firmware: wl0: Jul 18 2014 18:24:48 version 7.10.226.54.x2 (A0 Station) FWID 01-2faae407
  3103. [ 42.268575] dhd_txglom_enable: en[ OK ] Started /etc/rc.local Compatibility.
  3104. able 1
  3105. [ 42.268594] dhd_conf_set_disable_proptx: set disable_proptx 0
  3106. [ 42.271350] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
  3107. [ 42.272089] wl_android_wifi_on: Success
  3108. [ 42.350444] dhd_open: Exit ret=0
  3109. Starting Hold until boot process finishes up...
  3110. [ OK ] Started Hold until boot process finishes up.
  3111. [ OK ] Started Serial Getty on ttyS0.
  3112. [ OK ] Started Getty on tty1.
  3113. [ OK ] Reached target Login Prompts.
  3114. [ OK ] Reached target Multi-User System.
  3115. [ OK ] Reached target Graphical Interface.
  3116. [ OK ] Started Stop ureadahead data collection 45s after completed startup.
  3117. Starting Update UTMP about System Runlevel Changes...
  3118. [ OK ] Started TLP system startup/shutdown.
  3119. Starting Set console scheme...
  3120. [ OK ] Started Set console scheme.
  3121. [ OK ] Created slice User Slice of pi.
  3122. Starting User Manager for UID 1000...
  3123. [ OK ] Started Update UTMP about System Runlevel Changes.
  3124. [ OK ] Started Session c1 of user pi.
  3125. [ OK ] Started User Manager for UID 1000.
  3126.  
  3127. Ubuntu 16.04.1 LTS bpi-iot-ros-ai ttyS0
  3128.  
  3129. bpi-iot-ros-ai login: [ 48.294988] calling hci_uart_init+0x0/0xf4 [hci_uart] @ 2166
  3130. [ 48.301554] Bluetooth: HCI UART driver ver 2.2
  3131. [ 48.306571] Bluetooth: HCI H4 protocol initialized
  3132. [ 48.312104] Bluetooth: HCI BCSP protocol initialized
  3133. [ 48.317690] Bluetooth: HCILL protocol initialized
  3134. [ 48.323108] Bluetooth: HCI Realtek H5 protocol initialized
  3135. [ 48.329355] initcall hci_uart_init+0x0/0xf4 [hci_uart] returned 0 after 27096 usecs
  3136. pi
  3137. Password:
  3138. Last login: Thu Dec 14 00:17:55 CST 2017 on ttyS0
  3139. Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 3.4.39 armv7l)
  3140.  
  3141. * Documentation: https://help.ubuntu.com
  3142. * Management: https://landscape.canonical.com
  3143. * Support: https://ubuntu.com/advantage
  3144.  
  3145. 531 packages can be updated.
  3146. 296 updates are security updates.
  3147.  
  3148. pi@bpi-iot-ros-ai:~$ dmesg
  3149. [ 0.000000] setup+0x0/0x68 returned 0 after 18 usecs
  3150. [ 3.436273] calling aio_setup+0x0/0xb8 @ 1
  3151. [ 3.440587] initcall aio_setup+0x0/0xb8 returned 0 after 53 usecs
  3152. [ 3.446647] calling proc_locks_init+0x0/0x40 @ 1
  3153. [ 3.451452] initcall proc_locks_init+0x0/0x40 returned 0 after 12 usecs
  3154. [ 3.458087] calling init_mbcache+0x0/0x20 @ 1
  3155. [ 3.462620] initcall init_mbcache+0x0/0x20 returned 0 after 2 usecs
  3156. [ 3.468920] calling dquot_init+0x0/0x134 @ 1
  3157. [ 3.473357] VFS: Disk quotas dquot_6.5.2
  3158. [ 3.477692] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  3159. [ 3.483942] initcall dquot_init+0x0/0x134 returned 0 after 10331 usecs
  3160. [ 3.490526] calling init_v2_quota_format+0x0/0x30 @ 1
  3161. [ 3.495704] initcall init_v2_quota_format+0x0/0x30 returned 0 after 1 usecs
  3162. [ 3.502744] calling quota_init+0x0/0x34 @ 1
  3163. [ 3.507081] initcall quota_init+0x0/0x34 returned 0 after 25 usecs
  3164. [ 3.513317] calling proc_cmdline_init+0x0/0x40 @ 1
  3165. [ 3.518246] initcall proc_cmdline_init+0x0/0x40 returned 0 after 10 usecs
  3166. [ 3.525103] calling proc_consoles_init+0x0/0x40 @ 1
  3167. [ 3.530136] initcall proc_consoles_init+0x0/0x40 returned 0 after 7 usecs
  3168. [ 3.536954] calling proc_cpuinfo_init+0x0/0x40 @ 1
  3169. [ 3.541922] initcall proc_cpuinfo_init+0x0/0x40 returned 0 after 7 usecs
  3170. [ 3.548654] calling proc_devices_init+0x0/0x40 @ 1
  3171. [ 3.553627] initcall proc_devices_init+0x0/0x40 returned 0 after 7 usecs
  3172. [ 3.560378] calling proc_interrupts_init+0x0/0x40 @ 1
  3173. [ 3.565563] initcall proc_interrupts_init+0x0/0x40 returned 0 after 7 usecs
  3174. [ 3.572597] calling proc_loadavg_init+0x0/0x40 @ 1
  3175. [ 3.577523] initcall proc_loadavg_init+0x0/0x40 returned 0 after 7 usecs
  3176. [ 3.584300] calling proc_meminfo_init+0x0/0x40 @ 1
  3177. [ 3.589223] initcall proc_meminfo_init+0x0/0x40 returned 0 after 7 usecs
  3178. [ 3.595997] calling proc_stat_init+0x0/0x40 @ 1
  3179. [ 3.600685] initcall proc_stat_init+0x0/0x40 returned 0 after 7 usecs
  3180. [ 3.607154] calling proc_uptime_init+0x0/0x40 @ 1
  3181. [ 3.612039] initcall proc_uptime_init+0x0/0x40 returned 0 after 7 usecs
  3182. [ 3.618681] calling proc_version_init+0x0/0x40 @ 1
  3183. [ 3.623652] initcall proc_version_init+0x0/0x40 returned 0 after 7 usecs
  3184. [ 3.630403] calling proc_softirqs_init+0x0/0x40 @ 1
  3185. [ 3.635417] initcall proc_softirqs_init+0x0/0x40 returned 0 after 8 usecs
  3186. [ 3.642277] calling proc_kmsg_init+0x0/0x40 @ 1
  3187. [ 3.646943] initcall proc_kmsg_init+0x0/0x40 returned 0 after 7 usecs
  3188. [ 3.653457] calling proc_page_init+0x0/0x60 @ 1
  3189. [ 3.658130] initcall proc_page_init+0x0/0x60 returned 0 after 13 usecs
  3190. [ 3.664724] calling configfs_init+0x0/0xd0 @ 1
  3191. [ 3.669422] initcall configfs_init+0x0/0xd0 returned 0 after 122 usecs
  3192. [ 3.675906] calling init_devpts_fs+0x0/0x6c @ 1
  3193. [ 3.680699] initcall init_devpts_fs+0x0/0x6c returned 0 after 110 usecs
  3194. [ 3.687235] calling init_reiserfs_fs+0x0/0x88 @ 1
  3195. [ 3.692279] initcall init_reiserfs_fs+0x0/0x88 returned 0 after 160 usecs
  3196. [ 3.698934] calling init_ext3_fs+0x0/0x90 @ 1
  3197. [ 3.703821] initcall init_ext3_fs+0x0/0x90 returned 0 after 332 usecs
  3198. [ 3.709941] calling init_ext2_fs+0x0/0x90 @ 1
  3199. [ 3.714641] initcall init_ext2_fs+0x0/0x90 returned 0 after 161 usecs
  3200. [ 3.720974] calling ext4_init_fs+0x0/0x220 @ 1
  3201. [ 3.726600] initcall ext4_init_fs+0x0/0x220 returned 0 after 1030 usecs
  3202. [ 3.732243] calling journal_init+0x0/0xcc @ 1
  3203. [ 3.737084] initcall journal_init+0x0/0xcc returned 0 after 351 usecs
  3204. [ 3.743247] calling journal_init+0x0/0x128 @ 1
  3205. [ 3.748040] initcall journal_init+0x0/0x128 returned 0 after 218 usecs
  3206. [ 3.754427] calling init_squashfs_fs+0x0/0x90 @ 1
  3207. [ 3.759422] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  3208. [ 3.765175] initcall init_squashfs_fs+0x0/0x90 returned 0 after 5778 usecs
  3209. [ 3.772104] calling init_ramfs_fs+0x0/0x1c @ 1
  3210. [ 3.776679] initcall init_ramfs_fs+0x0/0x1c returned 0 after 3 usecs
  3211. [ 3.783110] calling init_fat_fs+0x0/0x68 @ 1
  3212. [ 3.787840] initcall init_fat_fs+0x0/0x68 returned 0 after 321 usecs
  3213. [ 3.793947] calling init_vfat_fs+0x0/0x1c @ 1
  3214. [ 3.798433] initcall init_vfat_fs+0x0/0x1c returned 0 after 4 usecs
  3215. [ 3.804778] calling init_msdos_fs+0x0/0x1c @ 1
  3216. [ 3.809352] initcall init_msdos_fs+0x0/0x1c returned 0 after 3 usecs
  3217. [ 3.815784] calling init_iso9660_fs+0x0/0x98 @ 1
  3218. [ 3.820771] initcall init_iso9660_fs+0x0/0x98 returned 0 after 213 usecs
  3219. [ 3.827288] calling init_hfsplus_fs+0x0/0x78 @ 1
  3220. [ 3.832248] initcall init_hfsplus_fs+0x0/0x78 returned 0 after 161 usecs
  3221. [ 3.838814] calling ecryptfs_init+0x0/0x1dc @ 1
  3222. [ 3.844432] initcall ecryptfs_init+0x0/0x1dc returned 0 after 885 usecs
  3223. [ 3.850200] calling init_nfs_fs+0x0/0x154 @ 1
  3224. [ 3.854672] NFS: Registering the id_resolver key type
  3225. [ 3.860524] initcall init_nfs_fs+0x0/0x154 returned 0 after 5707 usecs
  3226. [ 3.866375] calling init_nfsd+0x0/0x124 @ 1
  3227. [ 3.870738] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  3228. [ 3.877772] initcall init_nfsd+0x0/0x124 returned 0 after 6860 usecs
  3229. [ 3.883569] calling init_nlm+0x0/0x58 @ 1
  3230. [ 3.887722] initcall init_nlm+0x0/0x58 returned 0 after 24 usecs
  3231. [ 3.893786] calling init_nls_cp437+0x0/0x1c @ 1
  3232. [ 3.898444] initcall init_nls_cp437+0x0/0x1c returned 0 after 1 usecs
  3233. [ 3.904964] calling init_nls_cp932+0x0/0x1c @ 1
  3234. [ 3.909623] initcall init_nls_cp932+0x0/0x1c returned 0 after 1 usecs
  3235. [ 3.916144] calling init_nls_euc_jp+0x0/0x58 @ 1
  3236. [ 3.920913] initcall init_nls_euc_jp+0x0/0x58 returned 0 after 2 usecs
  3237. [ 3.927474] calling init_nls_cp936+0x0/0x1c @ 1
  3238. [ 3.932178] initcall init_nls_cp936+0x0/0x1c returned 0 after 1 usecs
  3239. [ 3.938654] calling init_nls_cp949+0x0/0x1c @ 1
  3240. [ 3.943358] initcall init_nls_cp949+0x0/0x1c returned 0 after 0 usecs
  3241. [ 3.949834] calling init_nls_cp950+0x0/0x1c @ 1
  3242. [ 3.954539] initcall init_nls_cp950+0x0/0x1c returned 0 after 1 usecs
  3243. [ 3.961049] calling init_nls_ascii+0x0/0x1c @ 1
  3244. [ 3.965697] initcall init_nls_ascii+0x0/0x1c returned 0 after 1 usecs
  3245. [ 3.972218] calling init_nls_iso8859_1+0x0/0x1c @ 1
  3246. [ 3.977223] initcall init_nls_iso8859_1+0x0/0x1c returned 0 after 0 usecs
  3247. [ 3.984090] calling init_nls_utf8+0x0/0x38 @ 1
  3248. [ 3.988664] initcall init_nls_utf8+0x0/0x38 returned 0 after 2 usecs
  3249. [ 3.995097] calling init_cifs+0x0/0x3c8 @ 1
  3250. [ 4.000124] initcall init_cifs+0x0/0x3c8 returned 0 after 692 usecs
  3251. [ 4.005735] calling init_ntfs_fs+0x0/0x1e8 @ 1
  3252. [ 4.010351] NTFS driver 2.1.30 [Flags: R/W].
  3253. [ 4.014873] initcall init_ntfs_fs+0x0/0x1e8 returned 0 after 4409 usecs
  3254. [ 4.021362] calling init_autofs4_fs+0x0/0x30 @ 1
  3255. [ 4.026311] initcall init_autofs4_fs+0x0/0x30 returned 0 after 201 usecs
  3256. [ 4.032891] calling fuse_init+0x0/0x150 @ 1
  3257. [ 4.037191] fuse init (API version 7.18)
  3258. [ 4.041633] initcall fuse_init+0x0/0x150 returned 0 after 4329 usecs
  3259. [ 4.047594] calling cuse_init+0x0/0xb4 @ 1
  3260. [ 4.052073] initcall cuse_init+0x0/0xb4 returned 0 after 196 usecs
  3261. [ 4.058081] calling init_udf_fs+0x0/0x80 @ 1
  3262. [ 4.062683] initcall init_udf_fs+0x0/0x80 returned 0 after 148 usecs
  3263. [ 4.068914] calling init_jfs_fs+0x0/0x20c @ 1
  3264. [ 4.073768] JFS: nTxBlock = 8192, nTxLock = 65536
  3265. [ 4.090900] initcall init_jfs_fs+0x0/0x20c returned 0 after 17022 usecs
  3266. [ 4.091973] calling init_xfs_fs+0x0/0xb8 @ 1
  3267. [ 4.096388] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
  3268. [ 4.107024] initcall init_xfs_fs+0x0/0xb8 returned 0 after 10378 usecs
  3269. [ 4.111770] calling init_btrfs_fs+0x0/0xb0 @ 1
  3270. [ 4.117651] Btrfs loaded
  3271. [ 4.118928] initcall init_btrfs_fs+0x0/0xb0 returned 0 after 2539 usecs
  3272. [ 4.125628] calling init_ceph+0x0/0x134 @ 1
  3273. [ 4.130171] ceph: loaded (mds proto 32)
  3274. [ 4.133833] initcall init_ceph+0x0/0x134 returned 0 after 3808 usecs
  3275. [ 4.140270] calling aufs_init+0x0/0x200 @ 1
  3276. [ 4.145225] aufs 3.4-20131104
  3277. [ 4.147614] initcall aufs_init+0x0/0x200 returned 0 after 2962 usecs
  3278. [ 4.154053] calling ipc_init+0x0/0x2c @ 1
  3279. [ 4.158200] msgmni has been set to 1441
  3280. [ 4.162136] initcall ipc_init+0x0/0x2c returned 0 after 3857 usecs
  3281. [ 4.168325] calling ipc_sysctl_init+0x0/0x20 @ 1
  3282. [ 4.173154] initcall ipc_sysctl_init+0x0/0x20 returned 0 after 37 usecs
  3283. [ 4.179764] calling init_mqueue_fs+0x0/0xc4 @ 1
  3284. [ 4.184772] initcall init_mqueue_fs+0x0/0xc4 returned 0 after 294 usecs
  3285. [ 4.191146] calling key_proc_init+0x0/0x54 @ 1
  3286. [ 4.195724] initcall key_proc_init+0x0/0x54 returned 0 after 11 usecs
  3287. [ 4.202235] calling crypto_wq_init+0x0/0x4c @ 1
  3288. [ 4.207079] initcall crypto_wq_init+0x0/0x4c returned 0 after 180 usecs
  3289. [ 4.213594] calling crypto_algapi_init+0x0/0x18 @ 1
  3290. [ 4.218612] initcall crypto_algapi_init+0x0/0x18 returned 0 after 18 usecs
  3291. [ 4.225561] calling skcipher_module_init+0x0/0x50 @ 1
  3292. [ 4.230749] initcall skcipher_module_init+0x0/0x50 returned 0 after 0 usecs
  3293. [ 4.237744] calling chainiv_module_init+0x0/0x1c @ 1
  3294. [ 4.242888] initcall chainiv_module_init+0x0/0x1c returned 0 after 7 usecs
  3295. [ 4.249791] calling eseqiv_module_init+0x0/0x1c @ 1
  3296. [ 4.254845] initcall eseqiv_module_init+0x0/0x1c returned 0 after 3 usecs
  3297. [ 4.261728] calling seqiv_module_init+0x0/0x1c @ 1
  3298. [ 4.266609] initcall seqiv_module_init+0x0/0x1c returned 0 after 3 usecs
  3299. [ 4.273388] calling crypto_user_init+0x0/0x54 @ 1
  3300. [ 4.278241] initcall crypto_user_init+0x0/0x54 returned 0 after 21 usecs
  3301. [ 4.285002] calling hmac_module_init+0x0/0x1c @ 1
  3302. [ 4.289836] initcall hmac_module_init+0x0/0x1c returned 0 after 3 usecs
  3303. [ 4.296527] calling vmac_module_init+0x0/0x1c @ 1
  3304. [ 4.301380] initcall vmac_module_init+0x0/0x1c returned 0 after 3 usecs
  3305. [ 4.308031] calling crypto_xcbc_module_init+0x0/0x1c @ 1
  3306. [ 4.313518] initcall crypto_xcbc_module_init+0x0/0x1c returned 0 after 3 usecs
  3307. [ 4.320793] calling crypto_null_mod_init+0x0/0x7c @ 1
  3308. [ 4.326152] alg: No test for cipher_null (cipher_null-generic)
  3309. [ 4.332119] alg: No test for ecb(cipher_null) (ecb-cipher_null)
  3310. [ 4.338040] alg: No test for digest_null (digest_null-generic)
  3311. [ 4.343976] alg: No test for compress_null (compress_null-generic)
  3312. [ 4.350051] initcall crypto_null_mod_init+0x0/0x7c returned 0 after 23509 usecs
  3313. [ 4.357345] calling md4_mod_init+0x0/0x1c @ 1
  3314. [ 4.362286] initcall md4_mod_init+0x0/0x1c returned 0 after 393 usecs
  3315. [ 4.368351] calling md5_mod_init+0x0/0x1c @ 1
  3316. [ 4.373208] initcall md5_mod_init+0x0/0x1c returned 0 after 315 usecs
  3317. [ 4.379358] calling rmd128_mod_init+0x0/0x1c @ 1
  3318. [ 4.384542] initcall rmd128_mod_init+0x0/0x1c returned 0 after 381 usecs
  3319. [ 4.390909] calling rmd160_mod_init+0x0/0x1c @ 1
  3320. [ 4.396074] initcall rmd160_mod_init+0x0/0x1c returned 0 after 409 usecs
  3321. [ 4.402433] calling rmd256_mod_init+0x0/0x1c @ 1
  3322. [ 4.407547] initcall rmd256_mod_init+0x0/0x1c returned 0 after 357 usecs
  3323. [ 4.413960] calling rmd320_mod_init+0x0/0x1c @ 1
  3324. [ 4.419110] initcall rmd320_mod_init+0x0/0x1c returned 0 after 392 usecs
  3325. [ 4.425490] calling sha1_generic_mod_init+0x0/0x1c @ 1
  3326. [ 4.431114] initcall sha1_generic_mod_init+0x0/0x1c returned 0 after 330 usecs
  3327. [ 4.438031] calling sha256_generic_mod_init+0x0/0x44 @ 1
  3328. [ 4.444126] initcall sha256_generic_mod_init+0x0/0x44 returned 0 after 596 usecs
  3329. [ 4.450967] calling sha512_generic_mod_init+0x0/0x44 @ 1
  3330. [ 4.457603] initcall sha512_generic_mod_init+0x0/0x44 returned 0 after 1166 usecs
  3331. [ 4.463969] calling wp512_mod_init+0x0/0x64 @ 1
  3332. [ 4.472453] initcall wp512_mod_init+0x0/0x64 returned 0 after 3734 usecs
  3333. [ 4.475385] calling tgr192_mod_init+0x0/0x64 @ 1
  3334. [ 4.481526] initcall tgr192_mod_init+0x0/0x64 returned 0 after 1312 usecs
  3335. [ 4.486998] calling crypto_ecb_module_init+0x0/0x1c @ 1
  3336. [ 4.492398] initcall crypto_ecb_module_init+0x0/0x1c returned 0 after 3 usecs
  3337. [ 4.499564] calling crypto_cbc_module_init+0x0/0x1c @ 1
  3338. [ 4.504965] initcall crypto_cbc_module_init+0x0/0x1c returned 0 after 3 usecs
  3339. [ 4.512152] calling crypto_pcbc_module_init+0x0/0x1c @ 1
  3340. [ 4.517595] initcall crypto_pcbc_module_init+0x0/0x1c returned 0 after 3 usecs
  3341. [ 4.524890] calling crypto_cts_module_init+0x0/0x1c @ 1
  3342. [ 4.530267] initcall crypto_cts_module_init+0x0/0x1c returned 0 after 3 usecs
  3343. [ 4.537437] calling crypto_module_init+0x0/0x1c @ 1
  3344. [ 4.542490] initcall crypto_module_init+0x0/0x1c returned 0 after 3 usecs
  3345. [ 4.549311] calling crypto_module_init+0x0/0x1c @ 1
  3346. [ 4.554363] initcall crypto_module_init+0x0/0x1c returned 0 after 3 usecs
  3347. [ 4.561203] calling crypto_ctr_module_init+0x0/0x44 @ 1
  3348. [ 4.566565] initcall crypto_ctr_module_init+0x0/0x44 returned 0 after 5 usecs
  3349. [ 4.573770] calling crypto_gcm_module_init+0x0/0xcc @ 1
  3350. [ 4.579137] initcall crypto_gcm_module_init+0x0/0xcc returned 0 after 10 usecs
  3351. [ 4.586427] calling crypto_ccm_module_init+0x0/0x60 @ 1
  3352. [ 4.591808] initcall crypto_ccm_module_init+0x0/0x60 returned 0 after 8 usecs
  3353. [ 4.598971] calling pcrypt_init+0x0/0xb4 @ 1
  3354. [ 4.603803] initcall pcrypt_init+0x0/0xb4 returned 0 after 381 usecs
  3355. [[ 62.912313] [rfkill]: rfkill set power 1
  3356. 4.609805] calling des_generic_mod_init+0x0/0x44 @ 1
  3357. [ 4.615685] initcall des_generic_mod_init+0x0/0x44 returned 0 after 639 usecs
  3358. [ 4.622224] calling fcrypt_mod_init+0x0/0x1c @ 1
  3359. [ 4.627125] alg: No test for fcrypt (fcrypt-generic)
  3360. [ 4.632092] initcall fcrypt_mod_init+0x0/0x1c returned 0 after 5003 usecs
  3361. [ 4.638838] calling blowfish_mod_init+0x0/0x1c @ 1
  3362. [ 4.650097] initcall blowfish_mod_init+0x0/0x1c returned 0 after 6140 usecs
  3363. [ 4.651511] calling twofish_mod_init+0x0/0x1c @ 1
  3364. [ 4.657131] initcall twofish_mod_init+0x0/0x1c returned 0 after 745 usecs
  3365. [ 4.663240] calling serpent_mod_init+0x0/0x44 @ 1
  3366. [ 4.668847] initcall serpent_mod_init+0x0/0x44 returned 0 after 760 usecs
  3367. [ 4.674936] calling aes_init+0x0/0x1c @ 1
  3368. [ 4.679428] initcall aes_init+0x0/0x1c returned 0 after 344 usecs
  3369. [ 4.685247] calling camellia_init+0x0/0x1c @ 1
  3370. [ 4.690237] initcall camellia_init+0x0/0x1c returned 0 after 406 usecs
  3371. [ 4.696405] calling cast5_mod_init+0x0/0x1c @ 1
  3372. [ 4.701433] initcall cast5_mod_init+0x0/0x1c returned 0 after 309 usecs
  3373. [ 4.707758] calling cast6_mod_init+0x0/0x1c @ 1
  3374. [ 4.712839] initcall cast6_mod_init+0x0/0x1c returned 0 after 364 usecs
  3375. [ 4.719111] calling arc4_init+0x0/0x1c @ 1
  3376. [ 4.723765] initcall arc4_init+0x0/0x1c returned 0 after 374 usecs
  3377. [ 4.729598] calling tea_mod_init+0x0/0x64 @ 1
  3378. [ 4.734957] initcall tea_mod_init+0x0/0x64 returned 0 after 808 usecs
  3379. [ 4.740630] calling khazad_mod_init+0x0/0x1c @ 1
  3380. [ 4.745766] initcall khazad_mod_init+0x0/0x1c returned 0 after 382 usecs
  3381. [ 4.752156] calling anubis_mod_init+0x0/0x1c @ 1
  3382. [ 4.757541] initcall anubis_mod_init+0x0/0x1c returned 0 after 625 usecs
  3383. [ 4.763680] calling seed_init+0x0/0x1c @ 1
  3384. [ 4.768227] initcall seed_init+0x0/0x1c returned 0 after 311 usecs
  3385. [ 4.774167] calling salsa20_generic_mod_init+0x0/0x1c @ 1
  3386. [ 4.779889] initcall salsa20_generic_mod_init+0x0/0x1c returned 0 after 189 usecs
  3387. [ 4.787257] calling deflate_mod_init+0x0/0x1c @ 1
  3388. [ 4.793753] initcall deflate_mod_init+0x0/0x1c returned 0 after 1605 usecs
  3389. [ 4.799018] calling zlib_mod_init+0x0/0x1c @ 1
  3390. [ 4.805674] initcall zlib_mod_init+0x0/0x1c returned 0 after 1990 usecs
  3391. [ 4.810307] calling michael_mic_init+0x0/0x1c @ 1
  3392. [ 4.815448] initcall michael_mic_init+0x0/0x1c returned 0 after 299 usecs
  3393. [ 4.822010] calling crc32c_mod_init+0x0/0x1c @ 1
  3394. [ 4.827145] initcall crc32c_mod_init+0x0/0x1c returned 0 after 381 usecs
  3395. [ 4.833537] calling crypto_authenc_module_init+0x0/0x1c @ 1
  3396. [ 4.839237] initcall crypto_authenc_module_init+0x0/0x1c returned 0 after 3 usecs
  3397. [ 4.846792] calling crypto_authenc_esn_module_init+0x0/0x1c @ 1
  3398. [ 4.852862] initcall crypto_authenc_esn_module_init+0x0/0x1c returned 0 after 3 usecs
  3399. [ 4.860746] calling lzo_mod_init+0x0/0x1c @ 1
  3400. [ 4.865548] initcall lzo_mod_init+0x0/0x1c returned 0 after 306 usecs
  3401. [ 4.871757] calling krng_mod_init+0x0/0x1c @ 1
  3402. [ 4.876487] alg: No test for stdrng (krng)
  3403. [ 4.880604] initcall krng_mod_init+0x0/0x1c returned 0 after 4175 usecs
  3404. [ 4.887158] calling prng_mod_init+0x0/0x30 @ 1
  3405. [ 4.967333] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
  3406. [ 4.967760] initcall prng_mod_init+0x0/0x30 returned 0 after 74197 usecs
  3407. [ 4.974507] calling ghash_mod_init+0x0/0x1c @ 1
  3408. [ 4.979502] initcall ghash_mod_init+0x0/0x1c returned 0 after 337 usecs
  3409. [ 4.985852] calling af_alg_init+0x0/0x48 @ 1
  3410. [ 4.990270] NET: Registered protocol family 38
  3411. [ 4.994755] initcall af_alg_init+0x0/0x48 returned 0 after 4380 usecs
  3412. [ 5.001283] calling algif_hash_init+0x0/0x1c @ 1
  3413. [ 5.006024] initcall algif_hash_init+0x0/0x1c returned 0 after 3 usecs
  3414. [ 5.012627] calling algif_skcipher_init+0x0/0x1c @ 1
  3415. [ 5.017723] initcall algif_skcipher_init+0x0/0x1c returned 0 after 2 usecs
  3416. [ 5.024675] calling algif_rng_init+0x0/0x60 @ 1
  3417. [ 5.029337] initcall algif_rng_init+0x0/0x60 returned 0 after 2 usecs
  3418. [ 5.035855] calling asymmetric_key_init+0x0/0x1c @ 1
  3419. [ 5.041012] initcall asymmetric_key_init+0x0/0x1c returned 0 after 5 usecs
  3420. [ 5.047880] calling proc_genhd_init+0x0/0x60 @ 1
  3421. [ 5.052697] initcall proc_genhd_init+0x0/0x60 returned 0 after 26 usecs
  3422. [ 5.059320] calling bsg_init+0x0/0x144 @ 1
  3423. [ 5.063843] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  3424. [ 5.071049] initcall bsg_init+0x0/0x144 returned 0 after 7281 usecs
  3425. [ 5.077347] calling init_cgroup_blkio+0x0/0x1c @ 1
  3426. [ 5.082310] initcall init_cgroup_blkio+0x0/0x1c returned 0 after 2 usecs
  3427. [ 5.089046] calling noop_init+0x0/0x1c @ 1
  3428. [ 5.093312] io scheduler noop registered
  3429. [ 5.097281] initcall noop_init+0x0/0x1c returned 0 after 3875 usecs
  3430. [ 5.103628] calling deadline_init+0x0/0x1c @ 1
  3431. [ 5.108198] io scheduler deadline registered
  3432. [ 5.112556] initcall deadline_init+0x0/0x1c returned 0 after 4251 usecs
  3433. [ 5.119206] calling cfq_init+0x0/0xc0 @ 1
  3434. [ 5.123418] io scheduler cfq registered (default)
  3435. [ 5.128137] initcall cfq_init+0x0/0xc0 returned 0 after 4638 usecs
  3436. [ 5.134395] calling libcrc32c_mod_init+0x0/0x38 @ 1
  3437. [ 5.139413] initcall libcrc32c_mod_init+0x0/0x38 returned 0 after 10 usecs
  3438. [ 5.146356] calling percpu_counter_startup+0x0/0x24 @ 1
  3439. [ 5.151733] initcall percpu_counter_startup+0x0/0x24 returned 0 after 2 usecs
  3440. [ 5.158900] calling audit_classes_init+0x0/0x58 @ 1
  3441. [ 5.163954] initcall audit_classes_init+0x0/0x58 returned 0 after 5 usecs
  3442. [ 5.170795] calling dynamic_debug_init_debugfs+0x0/0x90 @ 1
  3443. [ 5.176532] initcall dynamic_debug_init_debugfs+0x0/0x90 returned 0 after 35 usecs
  3444. [ 5.184145] calling mbus_platform_init+0x0/0x74 @ 1
  3445. [ 5.189602] initcall mbus_platform_init+0x0/0x74 returned 0 after 440 usecs
  3446. [ 5.196202] calling pwm_module_init+0x0/0x108 @ 1
  3447. [ 5.201038] pwm module init!
  3448. [ 5.204478] initcall pwm_module_init+0x0/0x108 returned 0 after 3350 usecs
  3449. [ 5.210933] calling fb_console_init+0x0/0x158 @ 1
  3450. [ 5.215868] initcall fb_console_init+0x0/0x158 returned 0 after 109 usecs
  3451. [ 5.222638] calling genericbl_driver_init+0x0/0x1c @ 1
  3452. [ 5.227960] initcall genericbl_driver_init+0x0/0x1c returned 0 after 68 usecs
  3453. [ 5.235107] calling disp_module_init+0x0/0x134 @ 1
  3454. [ 5.240039] [DISP]disp_module_init
  3455. [ 5.243860] [DISP]parser_disp_init_para: screen0_output_type(3)
  3456. [ 5.249472] [DISP]parser_disp_init_para: screen0_output_mode(10) value(10)
  3457. [ 5.256427] [DISP]parser_disp_init_para: screen1_output_type(3)
  3458. [ 5.262402] [DISP]parser_disp_init_para: screen1_output_mode(10) value(10)
  3459. [ 5.320908] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
  3460. [ 5.358463] Console: switching to colour frame buffer device 240x67
  3461. [ 5.395592] [DISP]disp_module_init finish
  3462. [ 5.397928] initcall disp_module_init+0x0/0x134 returned 0 after 154174 usecs
  3463. [ 5.405144] calling pty_init+0x0/0x3c4 @ 1
  3464. [ 5.490888] initcall pty_init+0x0/0x3c4 returned 0 after 79604 usecs
  3465. [ 5.491704] calling sysrq_init+0x0/0x90 @ 1
  3466. [ 5.496077] initcall sysrq_init+0x0/0x90 returned 0 after 40 usecs
  3467. [ 5.502306] calling xuartps_init+0x0/0x44 @ 1
  3468. [ 5.506922] initcall xuartps_init+0x0/0x44 returned 0 after 135 usecs
  3469. [ 5.513309] calling sunxi_uart_init+0x0/0x310 @ 1
  3470. [ 5.518960] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  3471. [ 5.524306] sw_uart_pm()890 - uart0 clk is already enable
  3472. [ 5.529668] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  3473. [ 5.537684] console [ttyS0] enabled, bootconsole disabled
  3474. [ 5.544099] axp81x_dcdc1: Failed to create debugfs directory
  3475. [ 5.555727] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  3476. [ 5.562786] axp81x_dcdc1: Failed to create debugfs directory
  3477. [ 5.569196] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  3478. [ 5.576230] initcall sunxi_uart_init+0x0/0x310 returned 0 after 56726 usecs
  3479. [ 5.584058] calling rand_initialize+0x0/0x3c @ 1
  3480. [ 5.589407] initcall rand_initialize+0x0/0x3c returned 0 after 79 usecs
  3481. [ 5.596838] calling raw_init+0x0/0x144 @ 1
  3482. [ 5.601840] initcall raw_init+0x0/0x144 returned 0 after 287 usecs
  3483. [ 5.608760] calling drm_core_init+0x0/0x144 @ 1
  3484. [ 5.614026] [drm] Initialized drm 1.1.0 20060810
  3485. [ 5.619195] initcall drm_core_init+0x0/0x144 returned 0 after 5112 usecs
  3486. [ 5.626717] calling ion_page_pool_init+0x0/0x14 @ 1
  3487. [ 5.632294] initcall ion_page_pool_init+0x0/0x14 returned 0 after 0 usecs
  3488. [ 5.639893] calling cn_proc_init+0x0/0x44 @ 1
  3489. [ 5.644891] initcall cn_proc_init+0x0/0x44 returned 0 after 6 usecs
  3490. [ 5.651932] calling topology_sysfs_init+0x0/0x78 @ 1
  3491. [ 5.657843] initcall topology_sysfs_init+0x0/0x78 returned 0 after 248 usecs
  3492. [ 5.665761] calling sw_sync_device_init+0x0/0x1c @ 1
  3493. [ 5.671641] initcall sw_sync_device_init+0x0/0x1c returned 0 after 191 usecs
  3494. [ 5.679535] calling brd_init+0x0/0x190 @ 1
  3495. [ 5.693261] brd: module loaded
  3496. [ 5.696693] initcall brd_init+0x0/0x190 returned 0 after 12149 usecs
  3497. [ 5.703843] calling loop_init+0x0/0x12c @ 1
  3498. [ 5.712792] loop: module loaded
  3499. [ 5.716316] initcall loop_init+0x0/0x12c returned 0 after 7506 usecs
  3500. [ 5.723529] calling init_cryptoloop+0x0/0x34 @ 1
  3501. [ 5.728800] initcall init_cryptoloop+0x0/0x34 returned 0 after 0 usecs
  3502. [ 5.736134] calling rf_pm_init+0x0/0x28 @ 1
  3503. [ 5.741165] [rf_pm]: select module num is 10
  3504. [ 5.745943] [rf_pm]: module power1 name vcc-wifi-io
  3505. [ 5.751427] [rf_pm]: failed to fetch module_power1_vol
  3506. [ 5.757178] [rf_pm]: module power2 name
  3507. [ 5.761586] [rf_pm]: failed to fetch module_power2_vol
  3508. [ 5.767334] [rf_pm]: module power3 name
  3509. [ 5.771741] [rf_pm]: failed to fetch module_power3_vol
  3510. [ 5.777496] [rf_pm]: mod has no power_switch gpio
  3511. [ 5.782780] [rf_pm]: mod has no chip_en gpio
  3512. [ 5.787557] [rf_pm]: lpo_use_apclk: ac10032k2
  3513. [ 5.792548] [rf_pm]: get power regulator failed.
  3514. [ 5.797812] [rf_pm]: enable vcc-wifi-io.
  3515. [ 5.802819] [rf_pm]: mod info power switch -1
  3516. [ 5.807788] [rf_pm]: set ac10032k2 32k out
  3517. [ 5.812519] scene_lock_init name=rf_pm
  3518. [ 5.816759] initcall rf_pm_init+0x0/0x28 returned 0 after 74040 usecs
  3519. [ 5.824013] calling wifi_pm_init+0x0/0xe8 @ 1
  3520. [ 5.829256] [wifi_pm]: wifi gpio init is OK !!
  3521. [ 5.834296] initcall wifi_pm_init+0x0/0xe8 returned 0 after 5181 usecs
  3522. [ 5.841630] calling sw_rfkill_init+0x0/0x19c @ 1
  3523. [ 5.846929] [rfkill]: mod has no ls_int gpio
  3524. [ 5.851733] [rfkill]: mod has no pcm_ch gpio
  3525. [ 5.856847] [rfkill]: rfkill set power 0
  3526. [ 5.880095] initcall sw_rfkill_init+0x0/0x19c returned 0 after 32415 usecs
  3527. [ 5.887793] calling iscsi_transport_init+0x0/0x15c @ 1
  3528. [ 5.893678] Loading iSCSI transport class v2.0-870.
  3529. [ 5.899477] initcall iscsi_transport_init+0x0/0x15c returned 0 after 5653 usecs
  3530. [ 5.907693] calling iscsi_sw_tcp_init+0x0/0x58 @ 1
  3531. [ 5.913300] iscsi: registered transport (tcp)
  3532. [ 5.918181] initcall iscsi_sw_tcp_init+0x0/0x58 returned 0 after 4886 usecs
  3533. [ 5.926051] calling init_sd+0x0/0x13c @ 1
  3534. [ 5.930790] initcall init_sd+0x0/0x13c returned 0 after 122 usecs
  3535. [ 5.937611] calling init_sr+0x0/0x4c @ 1
  3536. [ 5.942162] initcall init_sr+0x0/0x4c returned 0 after 34 usecs
  3537. [ 5.948790] calling init_sg+0x0/0x128 @ 1
  3538. [ 5.953484] initcall init_sg+0x0/0x128 returned 0 after 72 usecs
  3539. [ 5.960236] calling ahci_init+0x0/0x24 @ 1
  3540. [ 5.965038] initcall ahci_init+0x0/0x24 returned -19 after 112 usecs
  3541. [ 5.972181] calling mv_init+0x0/0x1c @ 1
  3542. [ 5.976750] initcall mv_init+0x0/0x1c returned 0 after 74 usecs
  3543. [ 5.983404] calling spi_gpio_driver_init+0x0/0x1c @ 1
  3544. [ 5.989245] initcall spi_gpio_driver_init+0x0/0x1c returned 0 after 83 usecs
  3545. [ 5.997162] calling sunxi_spi_init+0x0/0x5ac @ 1
  3546. [ 6.002457] [spi]: Found 1 spi devices in config files
  3547. [ 6.008207] boards_num modalias max_spd_hz bus_num cs mode
  3548. [ 6.016613] 0 spidev 33000000 0 0 3
  3549. [ 6.025464] axp81x_dcdc1: Failed to create debugfs directory
  3550. [ 6.032127] spi spi0: master is unqueued, this is deprecated
  3551. [ 6.038566] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
  3552. [ 6.046918] [spi-0]: driver probe succeed, base f1c68000, irq 97!
  3553. [ 6.053802] initcall sunxi_spi_init+0x0/0x5ac returned 0 after 50147 usecs
  3554. [ 6.061524] calling bonding_init+0x0/0x904 @ 1
  3555. [ 6.066591] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  3556. [ 6.076644] initcall bonding_init+0x0/0x904 returned 0 after 9805 usecs
  3557. [ 6.084095] calling macvlan_init_module+0x0/0x44 @ 1
  3558. [ 6.089759] initcall macvlan_init_module+0x0/0x44 returned 0 after 3 usecs
  3559. [ 6.097482] calling macvtap_init+0x0/0xe0 @ 1
  3560. [ 6.102513] initcall macvtap_init+0x0/0xe0 returned 0 after 35 usecs
  3561. [ 6.109630] calling net_olddevs_init+0x0/0xc8 @ 1
  3562. [ 6.115035] initcall net_olddevs_init+0x0/0xc8 returned 0 after 14 usecs
  3563. [ 6.122606] calling realtek_init+0x0/0x1c @ 1
  3564. [ 6.127621] initcall realtek_init+0x0/0x1c returned 0 after 39 usecs
  3565. [ 6.134760] calling veth_init+0x0/0x1c @ 1
  3566. [ 6.139447] initcall veth_init+0x0/0x1c returned 0 after 1 usecs
  3567. [ 6.146192] calling xgmac_driver_init+0x0/0x1c @ 1
  3568. [ 6.151772] initcall xgmac_driver_init+0x0/0x1c returned 0 after 92 usecs
  3569. [ 6.159370] calling stmmac_driver_init+0x0/0x1c @ 1
  3570. [ 6.165030] initcall stmmac_driver_init+0x0/0x1c returned 0 after 74 usecs
  3571. [ 6.172749] calling geth_init+0x0/0x30 @ 1
  3572. [ 6.178619] initcall geth_init+0x0/0x30 returned 0 after 1154 usecs
  3573. [ 6.185673] calling ppp_init+0x0/0xf0 @ 1
  3574. [ 6.190275] PPP generic driver version 2.4.2
  3575. [ 6.195320] initcall ppp_init+0x0/0xf0 returned 0 after 4922 usecs
  3576. [ 6.202265] calling ppp_async_init+0x0/0x3c @ 1
  3577. [ 6.207434] initcall ppp_async_init+0x0/0x3c returned 0 after 1 usecs
  3578. [ 6.214677] calling bsdcomp_init+0x0/0x34 @ 1
  3579. [ 6.219648] PPP BSD Compression module registered
  3580. [ 6.224938] initcall bsdcomp_init+0x0/0x34 returned 0 after 5162 usecs
  3581. [ 6.232264] calling deflate_init+0x0/0x40 @ 1
  3582. [ 6.237238] PPP Deflate Compression module registered
  3583. [ 6.242915] initcall deflate_init+0x0/0x40 returned 0 after 5540 usecs
  3584. [ 6.250243] calling ppp_mppe_init+0x0/0xe4 @ 1
  3585. [ 6.257168] PPP MPPE Compression module registered
  3586. [ 6.262565] initcall ppp_mppe_init+0x0/0xe4 returned 0 after 7073 usecs
  3587. [ 6.269967] calling ppp_sync_init+0x0/0x3c @ 1
  3588. [ 6.275063] initcall ppp_sync_init+0x0/0x3c returned 0 after 1 usecs
  3589. [ 6.282192] calling pppox_init+0x0/0x1c @ 1
  3590. [ 6.286968] NET: Registered protocol family 24
  3591. [ 6.291961] initcall pppox_init+0x0/0x1c returned 0 after 4873 usecs
  3592. [ 6.299071] calling pppoe_init+0x0/0x8c @ 1
  3593. [ 6.303902] initcall pppoe_init+0x0/0x8c returned 0 after 32 usecs
  3594. [ 6.310843] calling pppolac_init+0x0/0x68 @ 1
  3595. [ 6.315817] initcall pppolac_init+0x0/0x68 returned 0 after 1 usecs
  3596. [ 6.322902] calling pppopns_init+0x0/0x68 @ 1
  3597. [ 6.327877] initcall pppopns_init+0x0/0x68 returned 0 after 1 usecs
  3598. [ 6.334910] calling qf9700_init+0x0/0x28 @ 1
  3599. [ 6.339890] usbcore: registered new interface driver qf9700
  3600. [ 6.346161] initcall qf9700_init+0x0/0x28 returned 0 after 6220 usecs
  3601. [ 6.353396] calling smsc95xx_driver_init+0x0/0x28 @ 1
  3602. [ 6.359209] usbcore: registered new interface driver smsc95xx
  3603. [ 6.365665] initcall smsc95xx_driver_init+0x0/0x28 returned 0 after 6363 usecs
  3604. [ 6.373766] calling usbnet_init+0x0/0x38 @ 1
  3605. [ 6.378677] initcall usbnet_init+0x0/0x38 returned 0 after 33 usecs
  3606. [ 6.385712] calling cdrom_init+0x0/0x2c @ 1
  3607. [ 6.390535] initcall cdrom_init+0x0/0x2c returned 0 after 20 usecs
  3608. [ 6.397452] calling mon_init+0x0/0xf8 @ 1
  3609. [ 6.402346] initcall mon_init+0x0/0xf8 returned 0 after 281 usecs
  3610. [ 6.409169] calling ehci_hcd_init+0x0/0xd8 @ 1
  3611. [ 6.414260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  3612. [ 6.441708] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  3613. [ 6.450934] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  3614. [ 6.460396] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  3615. [ 6.480075] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  3616. [ 6.486704] ehci_irq: highspeed device connect
  3617. [ 6.491842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  3618. [ 6.499439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3619. [ 6.507546] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  3620. [ 6.515950] usb usb1: Manufacturer: Linux 3.4.39 ehci_hcd
  3621. [ 6.522061] usb usb1: SerialNumber: sunxi-ehci
  3622. [ 6.527698] hub 1-0:1.0: USB hub found
  3623. [ 6.531936] hub 1-0:1.0: 1 port detected
  3624. [ 6.536816] initcall ehci_hcd_init+0x0/0xd8 returned 0 after 119676 usecs
  3625. [ 6.544439] calling ohci_hcd_mod_init+0x0/0xa8 @ 1
  3626. [ 6.549896] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  3627. [ 6.576929] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  3628. [ 6.585773] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  3629. [ 6.594303] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  3630. [ 6.664129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  3631. [ 6.671753] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3632. [ 6.679837] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  3633. [ 6.687847] usb usb2: Manufacturer: Linux 3.4.39 ohci_hcd
  3634. [ 6.693906] usb usb2: SerialNumber: sunxi-ohci
  3635. [ 6.699449] hub 2-0:1.0: USB hub found
  3636. [ 6.703683] hub 2-0:1.0: 1 port detected
  3637. [ 6.708552] initcall ohci_hcd_mod_init+0x0/0xa8 returned 0 after 154930 usecs
  3638. [ 6.716568] calling usb_stor_init+0x0/0x4c @ 1
  3639. [ 6.721693] Initializing USB Mass Storage driver...
  3640. [ 6.727291] usbcore: registered new interface driver usb-storage
  3641. [ 6.734080] USB Mass Storage support registered.
  3642. [ 6.739251] initcall usb_stor_init+0x0/0x4c returned 0 after 17142 usecs
  3643. [ 6.746791] calling alauda_driver_init+0x0/0x28 @ 1
  3644. [ 6.752424] usbcore: registered new interface driver ums-alauda
  3645. [ 6.759050] initcall alauda_driver_init+0x0/0x28 returned 0 after 6521 usecs
  3646. [ 6.766967] calling cypress_driver_init+0x0/0x28 @ 1
  3647. [ 6.772686] usbcore: registered new interface driver ums-cypress
  3648. [ 6.779410] initcall cypress_driver_init+0x0/0x28 returned 0 after 6605 usecs
  3649. [ 6.787421] calling datafab_driver_init+0x0/0x28 @ 1
  3650. [ 6.793138] usbcore: registered new interface driver ums-datafab
  3651. [ 6.799868] initcall datafab_driver_init+0x0/0x28 returned 0 after 6611 usecs
  3652. [ 6.807927] calling ene_ub6250_driver_init+0x0/0x28 @ 1
  3653. [ 6.813942] usbcore: registered new interface driver ums_eneub6250
  3654. [ 6.820892] initcall ene_ub6250_driver_init+0x0/0x28 returned 0 after 6826 usecs
  3655. [ 6.829168] calling freecom_driver_init+0x0/0x28 @ 1
  3656. [ 6.834883] usbcore: registered new interface driver ums-freecom
  3657. [ 6.841630] initcall freecom_driver_init+0x0/0x28 returned 0 after 6627 usecs
  3658. [ 6.849619] calling isd200_driver_init+0x0/0x28 @ 1
  3659. [ 6.850118] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  3660. [ 6.862778] usbcore: registered new interface driver ums-isd200
  3661. [ 6.869409] initcall isd200_driver_init+0x0/0x28 returned 0 after 6526 usecs
  3662. [ 6.877328] calling jumpshot_driver_init+0x0/0x28 @ 1
  3663. [ 6.883166] usbcore: registered new interface driver ums-jumpshot
  3664. [ 6.889987] initcall jumpshot_driver_init+0x0/0x28 returned 0 after 6715 usecs
  3665. [ 6.898095] calling karma_driver_init+0x0/0x28 @ 1
  3666. [ 6.903619] usbcore: registered new interface driver ums-karma
  3667. [ 6.910173] initcall karma_driver_init+0x0/0x28 returned 0 after 6439 usecs
  3668. [ 6.917968] calling onetouch_driver_init+0x0/0x28 @ 1
  3669. [ 6.923819] usbcore: registered new interface driver ums-onetouch
  3670. [ 6.930674] initcall onetouch_driver_init+0x0/0x28 returned 0 after 6734 usecs
  3671. [ 6.938760] calling realtek_cr_driver_init+0x0/0x28 @ 1
  3672. [ 6.944787] usbcore: registered new interface driver ums-realtek
  3673. [ 6.951538] initcall realtek_cr_driver_init+0x0/0x28 returned 0 after 6648 usecs
  3674. [ 6.959818] calling sddr09_driver_init+0x0/0x28 @ 1
  3675. [ 6.965438] usbcore: registered new interface driver ums-sddr09
  3676. [ 6.972091] initcall sddr09_driver_init+0x0/0x28 returned 0 after 6537 usecs
  3677. [ 6.979980] calling sddr55_driver_init+0x0/0x28 @ 1
  3678. [ 6.985629] usbcore: registered new interface driver ums-sddr55
  3679. [ 6.992295] initcall sddr55_driver_init+0x0/0x28 returned 0 after 6550 usecs
  3680. [ 7.000228] calling usbat_driver_init+0x0/0x28 @ 1
  3681. [ 7.005733] usbcore: registered new interface driver ums-usbat
  3682. [ 7.012317] initcall usbat_driver_init+0x0/0x28 returned 0 after 6467 usecs
  3683. [ 7.020159] calling usb_serial_init+0x0/0x1d8 @ 1
  3684. [ 7.025731] usbcore: registered new interface driver usbserial
  3685. [ 7.032357] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  3686. [ 7.032377] usbcore: registered new interface driver usbserial_generic
  3687. [ 7.032428] USB Serial support registered for generic
  3688. [ 7.052760] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  3689. [ 7.060760] usb 1-1: Product: USB 2.0 Hub
  3690. [ 7.066275] hub 1-1:1.0: USB hub found
  3691. [ 7.070693] hub 1-1:1.0: 4 ports detected
  3692. [ 7.076438] usbserial: USB Serial Driver core
  3693. [ 7.081354] initcall usb_serial_init+0x0/0x1d8 returned 0 after 54490 usecs
  3694. [ 7.089147] calling init+0x0/0x1d0 @ 1
  3695. [ 7.093874] file system registered
  3696. [ 7.099850] android_usb gadget: Mass Storage Function, version: 2009/09/11
  3697. [ 7.107580] android_usb gadget: Number of LUNs=3
  3698. [ 7.112770] lun0: LUN: removable file: (no medium)
  3699. [ 7.118227] lun1: LUN: removable file: (no medium)
  3700. [ 7.123703] lun2: LUN: removable file: (no medium)
  3701. [ 7.129559] android_usb gadget: android_usb ready
  3702. [ 7.134875] initcall init+0x0/0x1d0 returned 0 after 40439 usecs
  3703. [ 7.141632] calling sunxi_hcd_init+0x0/0x78 @ 1
  3704. [ 7.147297] axp81x_dcdc1: Failed to create debugfs directory
  3705. [ 7.153794] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  3706. [ 7.160968] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  3707. [ 7.170389] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  3708. [ 7.178054] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3709. [ 7.186223] usb usb3: Product: sunxi_hcd host driver
  3710. [ 7.191860] usb usb3: Manufacturer: Linux 3.4.39 sunxi_hcd-hcd
  3711. [ 7.198441] usb usb3: SerialNumber: sunxi_hcd_host0
  3712. [ 7.204617] hub 3-0:1.0: USB hub found
  3713. [ 7.208826] hub 3-0:1.0: 1 port detected
  3714. [ 7.214006] initcall sunxi_hcd_init+0x0/0x78 returned 0 after 65621 usecs
  3715. [ 7.221661] calling serport_init+0x0/0x38 @ 1
  3716. [ 7.226663] initcall serport_init+0x0/0x38 returned 0 after 2 usecs
  3717. [ 7.233719] calling mousedev_init+0x0/0x94 @ 1
  3718. [ 7.239296] mousedev: PS/2 mouse device common for all mice
  3719. [ 7.245560] initcall mousedev_init+0x0/0x94 returned 0 after 6591 usecs
  3720. [ 7.252988] calling joydev_init+0x0/0x1c @ 1
  3721. [ 7.257866] initcall joydev_init+0x0/0x1c returned 0 after 4 usecs
  3722. [ 7.264802] calling evdev_init+0x0/0x1c @ 1
  3723. [ 7.269768] initcall evdev_init+0x0/0x1c returned 0 after 182 usecs
  3724. [ 7.276810] calling atkbd_init+0x0/0x28 @ 1
  3725. [ 7.281721] initcall atkbd_init+0x0/0x28 returned 0 after 108 usecs
  3726. [ 7.288736] calling sunxikbd_init+0x0/0x388 @ 1
  3727. [ 7.293934] sunxikbd_script_init: key para not found, used default para.
  3728. [ 7.302156] initcall sunxikbd_init+0x0/0x388 returned 0 after 8029 usecs
  3729. [ 7.309659] calling psmouse_init+0x0/0x90 @ 1
  3730. [ 7.314941] initcall psmouse_init+0x0/0x90 returned 0 after 272 usecs
  3731. [ 7.322289] calling keyreset_init+0x0/0x1c @ 1
  3732. [ 7.327461] initcall keyreset_init+0x0/0x1c returned 0 after 98 usecs
  3733. [ 7.334706] calling sw_device_init+0x0/0xd4 @ 1
  3734. [ 7.340113] keyname:ctp_para subname:ctp_power_io ,get error!
  3735. [ 7.340184] initcall sw_device_init+0x0/0xd4 returned 0 after 300 usecs
  3736. [ 7.340200] calling ds1307_driver_init+0x0/0x20 @ 1
  3737. [ 7.340268] initcall ds1307_driver_init+0x0/0x20 returned 0 after 52 usecs
  3738. [ 7.340282] calling sunxi_rtc_init+0x0/0x34 @ 1
  3739. [ 7.340292] sunxi_rtc_init(796): sunxi rtc device register!
  3740. [ 7.340976] rtc_gettime(333): read time 1970-1-1 1:0:17
  3741. [ 7.341361] alarm_gettime(470): get alarm time 1970-1-1 1:0:0 success!
  3742. [ 7.341796] rtc_gettime(333): read time 1970-1-1 1:0:17
  3743. [ 7.342056] rtc0 rtc0: rtc core: registered rtc0 as rtc0
  3744. [ 7.342286] sunxi_rtc_probe(756)!
  3745. [ 7.342372] initcall sunxi_rtc_init+0x0/0x34 returned 0 after 2026 usecs
  3746. [ 7.342386] calling i2c_dev_init+0x0/0xd8 @ 1
  3747. [ 7.342395] i2c /dev entries driver
  3748. [ 7.343025] initcall i2c_dev_init+0x0/0xd8 returned 0 after 609 usecs
  3749. [ 7.343040] calling sunxi_cedar_init+0x0/0x34 @ 1
  3750. [ 7.343194] sunxi cedar version 0.1
  3751. [ 7.343283] [cedar]: install start!!!
  3752. [ 7.343547] [cedar]: install end!!!
  3753. [ 7.343593] initcall sunxi_cedar_init+0x0/0x34 returned 0 after 523 usecs
  3754. [ 7.343610] calling regulator_virtual_consumer_init+0x0/0x64 @ 1
  3755. [ 7.345348] initcall regulator_virtual_consumer_init+0x0/0x64 returned 0 after 1681 usecs
  3756. [ 7.345363] calling virtual_init+0x0/0x64 @ 1
  3757. [ 7.350412] initcall virtual_init+0x0/0x64 returned 0 after 4910 usecs
  3758. [ 7.350429] calling max1668_driver_init+0x0/0x20 @ 1
  3759. [ 7.350677] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18)
  3760. [ 7.350863] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19)
  3761. [ 7.351048] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29)
  3762. [ 7.351229] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a)
  3763. [ 7.351411] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b)
  3764. [ 7.351592] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
  3765. [ 7.351773] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d)
  3766. [ 7.351955] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e)
  3767. [ 7.352223] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18)
  3768. [ 7.352487] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19)
  3769. [ 7.352751] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a)
  3770. [ 7.353014] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29)
  3771. [ 7.353277] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a)
  3772. [ 7.353540] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b)
  3773. [ 7.353804] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c)
  3774. [ 7.354066] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d)
  3775. [ 7.354331] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e)
  3776. [ 7.354596] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
  3777. [ 7.354860] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x19)
  3778. [ 7.355124] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1a)
  3779. [ 7.355387] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x29)
  3780. [ 7.355654] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x2a)
  3781. [ 7.355917] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x2b)
  3782. [ 7.356181] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
  3783. [ 7.356445] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4d)
  3784. [ 7.356709] sunxi_i2c_do_xfer()945 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4e)
  3785. [ 7.356730] initcall max1668_driver_init+0x0/0x20 returned 0 after 6137 usecs
  3786. [ 7.356743] calling dm_init+0x0/0x6c @ 1
  3787. [ 7.357175] device-mapper: uevent: version 1.0.3
  3788. [ 7.357605] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  3789. [ 7.357627] initcall dm_init+0x0/0x6c returned 0 after 848 usecs
  3790. [ 7.357643] calling dm_crypt_init+0x0/0x80 @ 1
  3791. [ 7.357837] initcall dm_crypt_init+0x0/0x80 returned 0 after 173 usecs
  3792. [ 7.357852] calling dm_snapshot_init+0x0/0x22c @ 1
  3793. [ 7.357933] initcall dm_snapshot_init+0x0/0x22c returned 0 after 65 usecs
  3794. [ 7.357948] calling dm_mirror_init+0x0/0x94 @ 1
  3795. [ 7.358122] initcall dm_mirror_init+0x0/0x94 returned 0 after 155 usecs
  3796. [ 7.358136] calling dm_dirty_log_init+0x0/0x5c @ 1
  3797. [ 7.358153] initcall dm_dirty_log_init+0x0/0x5c returned 0 after 3 usecs
  3798. [ 7.358167] calling dm_zero_init+0x0/0x38 @ 1
  3799. [ 7.358182] initcall dm_zero_init+0x0/0x38 returned 0 after 2 usecs
  3800. [ 7.358196] calling cpufreq_stats_init+0x0/0xe8 @ 1
  3801. [ 7.358226] initcall cpufreq_stats_init+0x0/0xe8 returned 0 after 16 usecs
  3802. [ 7.358241] calling cpufreq_gov_powersave_init+0x0/0x1c @ 1
  3803. [ 7.358258] initcall cpufreq_gov_powersave_init+0x0/0x1c returned 0 after 2 usecs
  3804. [ 7.358273] calling cpufreq_gov_userspace_init+0x0/0x1c @ 1
  3805. [ 7.358288] initcall cpufreq_gov_userspace_init+0x0/0x1c returned 0 after 1 usecs
  3806. [ 7.358302] calling cpufreq_gov_dbs_init+0x0/0x1c @ 1
  3807. [ 7.358317] initcall cpufreq_gov_dbs_init+0x0/0x1c returned 0 after 1 usecs
  3808. [ 7.358337] calling autohotplug_init+0x0/0x448 @ 1
  3809. [ 7.358669] initcall autohotplug_init+0x0/0x448 returned 0 after 304 usecs
  3810. [ 7.358684] calling sunxi_cpufreq_init+0x0/0x44c @ 1
  3811. [ 7.358884] sunxi_get_soc_bin: slow chip
  3812. [ 7.361682] initcall sunxi_cpufreq_init+0x0/0x44c returned 0 after 2914 usecs
  3813. [ 7.361691] calling mmc_blk_init+0x0/0x88 @ 1
  3814. [ 7.361731] initcall mmc_blk_init+0x0/0x88 returned 0 after 31 usecs
  3815. [ 7.361739] calling sunxi_mci_init+0x0/0x160 @ 1
  3816. [ 7.361746] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.113 2015-5-20 17:17) Compiled in Dec 13 2017 at 19:33:46
  3817. [ 7.361781] [mmc]: get mmc1's sdc_power is null!
  3818. [ 7.361800] [mmc]: get mmc2's 2xmode ok, val = 1
  3819. [ 7.361806] [mmc]: get mmc2's ddrmode ok, val = 1
  3820. [ 7.361815] [mmc]: MMC host used card: 0x7, boot card: 0x5, io_card 2
  3821. [ 7.442316] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
  3822. [ 7.442920] get sysconfig para erro!
  3823. [ 7.442934] get sysconfig para erro!
  3824. [ 7.442946] get sysconfig para erro!
  3825. [ 7.442959] get sysconfig para erro!
  3826. [ 7.443000] ctp_wakeup: !!!!gpio data 1
  3827. [ 7.550045] get_device_para_value:get subname:icn83xx_ts error! val.val:0
  3828. [ 7.550052] get_detect_list: script_get_item err.support_number = 11.
  3829. [ 7.550060] get_device_para_value:get subname:gt818_ts error! val.val:0
  3830. [ 7.550066] get_detect_list: script_get_item err.support_number = 8.
  3831. [ 7.550073] get_device_para_value:get subname:tu_ts error! val.val:0
  3832. [ 7.550078] get_detect_list: script_get_item err.support_number = 7.
  3833. [ 7.550085] get_device_para_value:get subname:gt9xxf_ts error! val.val:0
  3834. [ 7.550091] get_detect_list: script_get_item err.support_number = 6.
  3835. [ 7.550099] get_device_para_value:get subname:gslX680new error! val.val:0
  3836. [ 7.550105] get_detect_list: script_get_item err.support_number = 3.
  3837. [ 7.550142] sw_get_write_info:open error ....IS(filp):1
  3838. [ 7.550160] sw_set_write_info:open error ....IS(filp):1
  3839. [ 7.550165] get write info erro!
  3840. [ 7.550343] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  3841. [ 7.570184] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  3842. [ 7.590184] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  3843. [ 7.610184] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  3844. [ 7.630185] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  3845. [ 7.635648] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  3846. [ 8.133796] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  3847. [ 8.143815] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  3848. [ 8.145016] [mmc]: sdc0 fail to get regulator
  3849. [ 8.145022] [mmc]: *** sunxi_mci_set_ios(L2159): sdc0 card_power_on fail
  3850. [ 8.160027] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  3851. [ 8.177648] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  3852. [ 8.187420] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
  3853. [ 8.196369] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
  3854. [ 8.204507] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  3855. [ 8.206137] initcall sunxi_mci_init+0x0/0x160 returned 0 after 824591 usecs
  3856. [ 8.206148] calling gpio_led_driver_init+0x0/0x1c @ 1
  3857. [ 8.206267] initcall gpio_led_driver_init+0x0/0x1c returned 0 after 108 usecs
  3858. [ 8.206276] calling sunxi_leds_init+0x0/0x1bc @ 1
  3859. [ 8.206291] no red_led, ignore it!
  3860. [ 8.206621] Registered led device: green_led
  3861. [ 8.206788] Registered led device: blue_led
  3862. [ 8.206804] initcall sunxi_leds_init+0x0/0x1bc returned 0 after 506 usecs
  3863. [ 8.206812] calling respiration_init+0x0/0x40 @ 1
  3864. [ 8.206887] Registered led device: sunxi_respiration_lamp
  3865. [ 8.206895] initcall respiration_init+0x0/0x40 returned 0 after 73 usecs
  3866. [ 8.206903] calling timer_trig_init+0x0/0x1c @ 1
  3867. [ 8.206916] initcall timer_trig_init+0x0/0x1c returned 0 after 5 usecs
  3868. [ 8.206924] calling heartbeat_trig_init+0x0/0x1c @ 1
  3869. [ 8.207002] initcall heartbeat_trig_init+0x0/0x1c returned 0 after 67 usecs
  3870. [ 8.207011] calling bl_trig_init+0x0/0x1c @ 1
  3871. [ 8.207023] initcall bl_trig_init+0x0/0x1c returned 0 after 4 usecs
  3872. [ 8.207031] calling gpio_trig_init+0x0/0x1c @ 1
  3873. [ 8.207043] initcall gpio_trig_init+0x0/0x1c returned 0 after 4 usecs
  3874. [ 8.207051] calling defon_trig_init+0x0/0x1c @ 1
  3875. [ 8.207064] initcall defon_trig_init+0x0/0x1c returned 0 after 4 usecs
  3876. [ 8.207071] calling respiration_trig_init+0x0/0x54 @ 1
  3877. [ 8.207119] initcall respiration_trig_init+0x0/0x54 returned 0 after 38 usecs
  3878. [ 8.207128] calling switch_class_init+0x0/0x30 @ 1
  3879. [ 8.207152] initcall switch_class_init+0x0/0x30 returned 0 after 15 usecs
  3880. [ 8.207161] calling gpio_switch_init+0x0/0x1c @ 1
  3881. [ 8.207251] initcall gpio_switch_init+0x0/0x1c returned 0 after 78 usecs
  3882. [ 8.207259] calling hid_init+0x0/0x7c @ 1
  3883. [ 8.207339] initcall hid_init+0x0/0x7c returned 0 after 69 usecs
  3884. [ 8.207347] calling a4_init+0x0/0x28 @ 1
  3885. [ 8.207412] initcall a4_init+0x0/0x28 returned 0 after 55 usecs
  3886. [ 8.207420] calling ax_init+0x0/0x28 @ 1
  3887. [ 8.207453] initcall ax_init+0x0/0x28 returned 0 after 24 usecs
  3888. [ 8.207461] calling apple_init+0x0/0x40 @ 1
  3889. [ 8.207506] initcall apple_init+0x0/0x40 returned 0 after 35 usecs
  3890. [ 8.207514] calling belkin_init+0x0/0x28 @ 1
  3891. [ 8.207546] initcall belkin_init+0x0/0x28 returned 0 after 23 usecs
  3892. [ 8.207553] calling ch_init+0x0/0x28 @ 1
  3893. [ 8.207586] initcall ch_init+0x0/0x28 returned 0 after 23 usecs
  3894. [ 8.207593] calling ch_init+0x0/0x28 @ 1
  3895. [ 8.207625] initcall ch_init+0x0/0x28 returned 0 after 23 usecs
  3896. [ 8.207633] calling cp_init+0x0/0x28 @ 1
  3897. [ 8.207665] initcall cp_init+0x0/0x28 returned 0 after 23 usecs
  3898. [ 8.207673] calling dr_init+0x0/0x28 @ 1
  3899. [ 8.207715] initcall dr_init+0x0/0x28 returned 0 after 32 usecs
  3900. [ 8.207725] calling ems_init+0x0/0x30 @ 1
  3901. [ 8.207759] initcall ems_init+0x0/0x30 returned 0 after 25 usecs
  3902. [ 8.207767] calling ez_init+0x0/0x28 @ 1
  3903. [ 8.207799] initcall ez_init+0x0/0x28 returned 0 after 23 usecs
  3904. [ 8.207807] calling gyration_init+0x0/0x28 @ 1
  3905. [ 8.207840] initcall gyration_init+0x0/0x28 returned 0 after 24 usecs
  3906. [ 8.207848] calling holtek_init+0x0/0x28 @ 1
  3907. [ 8.207881] initcall holtek_init+0x0/0x28 returned 0 after 24 usecs
  3908. [ 8.207889] calling ks_init+0x0/0x28 @ 1
  3909. [ 8.207921] initcall ks_init+0x0/0x28 returned 0 after 23 usecs
  3910. [ 8.207929] calling keytouch_init+0x0/0x28 @ 1
  3911. [ 8.207962] initcall keytouch_init+0x0/0x28 returned 0 after 24 usecs
  3912. [ 8.207970] calling kye_init+0x0/0x28 @ 1
  3913. [ 8.208003] initcall kye_init+0x0/0x28 returned 0 after 23 usecs
  3914. [ 8.208012] calling ts_init+0x0/0x28 @ 1
  3915. [ 8.208051] initcall ts_init+0x0/0x28 returned 0 after 30 usecs
  3916. [ 8.208059] calling lg_init+0x0/0x28 @ 1
  3917. [ 8.208092] initcall lg_init+0x0/0x28 returned 0 after 24 usecs
  3918. [ 8.208100] calling logi_dj_init+0x0/0x88 @ 1
  3919. [ 8.208167] initcall logi_dj_init+0x0/0x88 returned 0 after 56 usecs
  3920. [ 8.208175] calling ms_init+0x0/0x28 @ 1
  3921. [ 8.208209] initcall ms_init+0x0/0x28 returned 0 after 24 usecs
  3922. [ 8.208217] calling mr_init+0x0/0x28 @ 1
  3923. [ 8.208250] initcall mr_init+0x0/0x28 returned 0 after 24 usecs
  3924. [ 8.208258] calling mt_init+0x0/0x28 @ 1
  3925. [ 8.208292] initcall mt_init+0x0/0x28 returned 0 after 25 usecs
  3926. [ 8.208299] calling ntrig_init+0x0/0x28 @ 1
  3927. [ 8.208345] initcall ntrig_init+0x0/0x28 returned 0 after 35 usecs
  3928. [ 8.208353] calling ortek_init+0x0/0x28 @ 1
  3929. [ 8.208387] initcall ortek_init+0x0/0x28 returned 0 after 24 usecs
  3930. [ 8.208396] calling pk_init+0x0/0x48 @ 1
  3931. [ 8.208452] initcall pk_init+0x0/0x48 returned 0 after 46 usecs
  3932. [ 8.208460] calling pl_init+0x0/0x28 @ 1
  3933. [ 8.208495] initcall pl_init+0x0/0x28 returned 0 after 26 usecs
  3934. [ 8.208503] calling pl_init+0x0/0x28 @ 1
  3935. [ 8.208537] initcall pl_init+0x0/0x28 returned 0 after 25 usecs
  3936. [ 8.208545] calling picolcd_init+0x0/0x28 @ 1
  3937. [ 8.208579] initcall picolcd_init+0x0/0x28 returned 0 after 25 usecs
  3938. [ 8.208587] calling px_init+0x0/0x28 @ 1
  3939. [ 8.208621] initcall px_init+0x0/0x28 returned 0 after 24 usecs
  3940. [ 8.208629] calling roccat_init+0x0/0x84 @ 1
  3941. [ 8.208640] initcall roccat_init+0x0/0x84 returned 0 after 2 usecs
  3942. [ 8.208647] calling arvo_init+0x0/0x78 @ 1
  3943. [ 8.208694] initcall arvo_init+0x0/0x78 returned 0 after 37 usecs
  3944. [ 8.208702] calling isku_init+0x0/0x78 @ 1
  3945. [ 8.208748] initcall isku_init+0x0/0x78 returned 0 after 36 usecs
  3946. [ 8.208756] calling kone_init+0x0/0x78 @ 1
  3947. [ 8.208811] initcall kone_init+0x0/0x78 returned 0 after 45 usecs
  3948. [ 8.208820] calling koneplus_init+0x0/0x78 @ 1
  3949. [ 8.208865] initcall koneplus_init+0x0/0x78 returned 0 after 36 usecs
  3950. [ 8.208873] calling kovaplus_init+0x0/0x78 @ 1
  3951. [ 8.208918] initcall kovaplus_init+0x0/0x78 returned 0 after 35 usecs
  3952. [ 8.208927] calling pyra_init+0x0/0x78 @ 1
  3953. [ 8.208973] initcall pyra_init+0x0/0x78 returned 0 after 36 usecs
  3954. [ 8.208981] calling saitek_init+0x0/0x28 @ 1
  3955. [ 8.209014] initcall saitek_init+0x0/0x28 returned 0 after 24 usecs
  3956. [ 8.209023] calling samsung_init+0x0/0x28 @ 1
  3957. [ 8.209056] initcall samsung_init+0x0/0x28 returned 0 after 24 usecs
  3958. [ 8.209066] calling sjoy_init+0x0/0x28 @ 1
  3959. [ 8.209101] initcall sjoy_init+0x0/0x28 returned 0 after 26 usecs
  3960. [ 8.209109] calling sony_init+0x0/0x28 @ 1
  3961. [ 8.209151] initcall sony_init+0x0/0x28 returned 0 after 32 usecs
  3962. [ 8.209159] calling speedlink_init+0x0/0x28 @ 1
  3963. [ 8.209194] initcall speedlink_init+0x0/0x28 returned 0 after 26 usecs
  3964. [ 8.209202] calling sp_init+0x0/0x28 @ 1
  3965. [ 8.209236] initcall sp_init+0x0/0x28 returned 0 after 25 usecs
  3966. [ 8.209244] calling ga_init+0x0/0x28 @ 1
  3967. [ 8.209278] initcall ga_init+0x0/0x28 returned 0 after 25 usecs
  3968. [ 8.209286] calling tm_init+0x0/0x28 @ 1
  3969. [ 8.209320] initcall tm_init+0x0/0x28 returned 0 after 25 usecs
  3970. [ 8.209328] calling tivo_init+0x0/0x28 @ 1
  3971. [ 8.209362] initcall tivo_init+0x0/0x28 returned 0 after 25 usecs
  3972. [ 8.209370] calling ts_init+0x0/0x28 @ 1
  3973. [ 8.209404] initcall ts_init+0x0/0x28 returned 0 after 25 usecs
  3974. [ 8.209412] calling twinhan_init+0x0/0x28 @ 1
  3975. [ 8.209446] initcall twinhan_init+0x0/0x28 returned 0 after 25 usecs
  3976. [ 8.209454] calling uclogic_init+0x0/0x28 @ 1
  3977. [ 8.209494] initcall uclogic_init+0x0/0x28 returned 0 after 30 usecs
  3978. [ 8.209502] calling zp_init+0x0/0x28 @ 1
  3979. [ 8.209544] initcall zp_init+0x0/0x28 returned 0 after 33 usecs
  3980. [ 8.209552] calling zc_init+0x0/0x28 @ 1
  3981. [ 8.209587] initcall zc_init+0x0/0x28 returned 0 after 26 usecs
  3982. [ 8.209596] calling waltop_init+0x0/0x28 @ 1
  3983. [ 8.209630] initcall waltop_init+0x0/0x28 returned 0 after 25 usecs
  3984. [ 8.209638] calling hid_init+0x0/0x80 @ 1
  3985. [ 8.209743] usbcore: registered new interface driver usbhid
  3986. [ 8.209749] usbhid: USB HID core driver
  3987. [ 8.209756] initcall hid_init+0x0/0x80 returned 0 after 107 usecs
  3988. [ 8.209765] calling alsa_timer_init+0x0/0x188 @ 1
  3989. [ 8.210042] initcall alsa_timer_init+0x0/0x188 returned 0 after 259 usecs
  3990. [ 8.210051] calling alsa_pcm_init+0x0/0x74 @ 1
  3991. [ 8.210066] initcall alsa_pcm_init+0x0/0x74 returned 0 after 7 usecs
  3992. [ 8.210075] calling snd_mem_init+0x0/0x4c @ 1
  3993. [ 8.210096] initcall snd_mem_init+0x0/0x4c returned 0 after 13 usecs
  3994. [ 8.210105] calling alsa_rawmidi_init+0x0/0x20 @ 1
  3995. [ 8.210115] initcall alsa_rawmidi_init+0x0/0x20 returned 0 after 1 usecs
  3996. [ 8.210123] calling snd_soc_init+0x0/0x114 @ 1
  3997. [ 8.210489] initcall snd_soc_init+0x0/0x114 returned 0 after 348 usecs
  3998. [ 8.210498] calling ac100_codec_driver_init+0x0/0x1c @ 1
  3999. [ 8.210527] ac100_probe,line:2917
  4000. [ 8.210617] initcall ac100_codec_driver_init+0x0/0x1c returned 0 after 106 usecs
  4001. [ 8.210626] calling sunxi_daudio0_init+0x0/0xd4 @ 1
  4002. [ 8.211234] initcall sunxi_daudio0_init+0x0/0xd4 returned 0 after 582 usecs
  4003. [ 8.211243] calling sunxi_soc_platform_daudio_init+0x0/0x34 @ 1
  4004. [ 8.211457] initcall sunxi_soc_platform_daudio_init+0x0/0x34 returned 0 after 198 usecs
  4005. [ 8.211467] calling snddaudio_codec_init+0x0/0xa0 @ 1
  4006. [ 8.211656] initcall snddaudio_codec_init+0x0/0xa0 returned 0 after 174 usecs
  4007. [ 8.211664] calling sunxi_snddaudio0_init+0x0/0x34 @ 1
  4008. [ 8.211908] initcall sunxi_snddaudio0_init+0x0/0x34 returned 0 after 227 usecs
  4009. [ 8.211917] calling bb_init+0x0/0x34 @ 1
  4010. [ 8.223764] async_waiting @ 1
  4011. [ 8.223900] calling 1_dapm_pre_sequence_async+0x0/0xa0 @ 145
  4012. [ 8.223911] initcall 1_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4013. [ 8.223930] calling 2_dapm_pre_sequence_async+0x0/0xa0 @ 145
  4014. [ 8.223940] initcall 2_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4015. [ 8.223958] calling 3_dapm_pre_sequence_async+0x0/0xa0 @ 145
  4016. [ 8.224001] calling 4_dapm_pre_sequence_async+0x0/0xa0 @ 159
  4017. [ 8.224013] initcall 4_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 2 usecs
  4018. [ 8.225007] initcall 3_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1010 usecs
  4019. [ 8.225037] async_continuing @ 1 after 1236 usec
  4020. [ 8.225173] calling 5_dapm_post_sequence_async+0x0/0xd8 @ 145
  4021. [ 8.225180] async_waiting @ 1
  4022. [ 8.225187] initcall 5_dapm_post_sequence_async+0x0/0xd8 returned 0 after 1 usecs
  4023. [ 8.225198] calling 6_dapm_post_sequence_async+0x0/0xd8 @ 159
  4024. [ 8.225209] initcall 6_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4025. [ 8.225218] calling 7_dapm_post_sequence_async+0x0/0xd8 @ 145
  4026. [ 8.225230] initcall 7_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4027. [ 8.225240] calling 8_dapm_post_sequence_async+0x0/0xd8 @ 159
  4028. [ 8.225250] initcall 8_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4029. [ 8.225283] async_continuing @ 1 after 94 usec
  4030. [ 8.240378] ------------audio_hmic_irq----------
  4031. [ 8.247748] ------------audio_hmic_irq----------
  4032. [ 8.382434] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0718
  4033. [ 8.382442] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
  4034. [ 8.382449] usb 1-1.1: Product: USB Storage
  4035. [ 8.382455] usb 1-1.1: SerialNumber: 000000000033
  4036. [ 8.406741] scsi0 : usb-storage 1-1.1:1.0
  4037. [ 8.408429] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4038. [ 8.409847] *******************Try sdio*******************
  4039. [ 8.410664] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  4040. [ 8.411496] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  4041. [ 8.412326] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  4042. [ 8.413156] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  4043. [ 8.413179] *******************Try sd *******************
  4044. [ 8.413829] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4045. [ 8.413921] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4046. [ 8.416388] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4047. [ 8.431534] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4048. [ 8.431637] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4049. [ 8.434118] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  4050. [ 8.434172] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  4051. [ 8.434268] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  4052. [ 8.434326] mmc0: new high speed SDHC card at address 59b4
  4053. [ 8.434674] mmcblk0: mmc0:59b4 7.36 GiB
  4054. [ 8.435898] mmcblk0: p1 p2
  4055. [ 8.436559] *******************sd init ok*******************
  4056. [ 8.436579] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4057. [ 8.450042] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4058. [ 8.470848] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52, RTO !!
  4059. [ 8.471680] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52, RTO !!
  4060. [ 8.471703] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4061. [ 8.474165] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4062. [ 8.476053] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 8, RTO !!
  4063. [ 8.476073] *******************Try sdio*******************
  4064. [ 8.476888] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  4065. [ 8.477716] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  4066. [ 8.478543] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  4067. [ 8.479371] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  4068. [ 8.479391] *******************Try sd *******************
  4069. [ 8.480206] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  4070. [ 8.481036] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  4071. [ 8.481863] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  4072. [ 8.482691] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  4073. [ 8.482711] *******************Try mmc*******************
  4074. [ 8.482720] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4075. [ 8.483122] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4076. [ 8.483204] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4077. [ 8.483284] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4078. [ 8.485744] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4079. [ 8.504197] asoc: ac100-aif1 <-> pri_dai mapping ok
  4080. [ 8.580244] usb 1-1.2: new high-speed USB device number 4 using sunxi-ehci
  4081. [ 8.641219] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4082. [ 8.653179] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4083. [ 8.653589] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4084. [ 8.653675] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4085. [ 8.653751] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  4086. [ 8.653798] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  4087. [ 8.653876] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  4088. [ 8.653950] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  4089. [ 8.654086] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  4090. [ 8.654157] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4091. [ 8.654206] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4092. [ 8.654273] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4093. [ 8.654346] mmc1: new high speed DDR MMC card at address 0001
  4094. [ 8.654735] mmcblk1: mmc1:0001 8WPD3R 7.28 GiB
  4095. [ 8.654894] mmcblk1boot0: mmc1:0001 8WPD3R partition 1 4.00 MiB
  4096. [ 8.655036] mmcblk1boot1: mmc1:0001 8WPD3R partition 2 4.00 MiB
  4097. [ 8.655987] mmcblk1:
  4098. [ 8.656743] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4099. [ 8.658640] mmcblk1boot1: unknown partition table
  4100. [ 8.659256] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4101. [ 8.660134] mmcblk1boot0: unknown partition table
  4102. [ 8.660376] *******************mmc init ok *******************
  4103. [ 8.691682] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0608
  4104. [ 8.691690] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  4105. [ 8.691697] usb 1-1.2: Product: USB2.0 Hub
  4106. [ 8.692428] hub 1-1.2:1.0: USB hub found
  4107. [ 8.692804] hub 1-1.2:1.0: 4 ports detected
  4108. [ 8.695188] async_waiting @ 1
  4109. [ 8.695216] calling 9_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4110. [ 8.695226] initcall 9_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4111. [ 8.695238] calling 10_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4112. [ 8.695249] calling 12_dapm_pre_sequence_async+0x0/0xa0 @ 159
  4113. [ 8.695258] calling 11_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4114. [ 8.695268] initcall 12_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4115. [ 8.695277] initcall 11_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4116. [ 8.695287] initcall 10_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4117. [ 8.790834] async_continuing @ 1 after 1 usec
  4118. [ 8.970364] usb 1-1.2.1: new low-speed USB device number 5 using sunxi-ehci
  4119. [ 8.981738] async_waiting @ 1
  4120. [ 8.981751] calling 13_dapm_post_sequence_async+0x0/0xd8 @ 160
  4121. [ 8.981761] initcall 13_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4122. [ 8.981771] calling 14_dapm_post_sequence_async+0x0/0xd8 @ 161
  4123. [ 8.981782] calling 15_dapm_post_sequence_async+0x0/0xd8 @ 5
  4124. [ 8.981790] calling 16_dapm_post_sequence_async+0x0/0xd8 @ 160
  4125. [ 8.981798] initcall 14_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4126. [ 8.981807] initcall 16_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4127. [ 8.981816] initcall 15_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4128. [ 9.084568] usb 1-1.2.1: New USB device found, idVendor=413c, idProduct=3012
  4129. [ 9.084582] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  4130. [ 9.084594] usb 1-1.2.1: Product: Dell USB Optical Mouse
  4131. [ 9.084604] usb 1-1.2.1: Manufacturer: Dell
  4132. [ 9.089549] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-sunxi-ehci-1.2.1/input0
  4133. [ 9.170512] usb 1-1.2.2: new low-speed USB device number 6 using sunxi-ehci
  4134. [ 9.174531] async_continuing @ 1 after 1 usec
  4135. [ 9.271600] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  4136. [ 9.286944] usb 1-1.2.2: New USB device found, idVendor=413c, idProduct=2107
  4137. [ 9.286958] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  4138. [ 9.286970] usb 1-1.2.2: Product: Dell USB Entry Keyboard
  4139. [ 9.286980] usb 1-1.2.2: Manufacturer: Dell
  4140. [ 9.292976] generic-usb 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-sunxi-ehci-1.2.2/input0
  4141. [ 9.466125] async_waiting @ 1
  4142. [ 9.466151] calling 17_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4143. [ 9.466168] initcall 17_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4144. [ 9.466187] calling 18_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4145. [ 9.466204] calling 19_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4146. [ 9.466219] calling 20_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4147. [ 9.466234] initcall 18_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4148. [ 9.466249] initcall 20_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 2 usecs
  4149. [ 9.466265] initcall 19_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4150. [ 9.501574] scsi 0:0:0:0: Direct-Access USB TO I DE/SATA Device 0016 PQ: 0 ANSI: 4
  4151. [ 9.504285] calling 21_sd_probe_async+0x0/0x1ac @ 161
  4152. [ 9.504615] sd 0:0:0:0: Attached scsi generic sg0 type 0
  4153. [ 9.507371] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  4154. [ 9.508495] sd 0:0:0:0: [sda] Asking for cache data failed
  4155. [ 9.508507] sd 0:0:0:0: [sda] Assuming drive cache: write through
  4156. [ 9.512993] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  4157. [ 9.514120] sd 0:0:0:0: [sda] Asking for cache data failed
  4158. [ 9.514132] sd 0:0:0:0: [sda] Assuming drive cache: write through
  4159. [ 9.514147] sd 0:0:0:0: [sda] Attached SCSI disk
  4160. [ 9.514168] initcall 21_sd_probe_async+0x0/0x1ac returned 0 after 9631 usecs
  4161. [ 9.563529] async_continuing @ 1 after 2 usec
  4162. [ 9.660936] async_waiting @ 1
  4163. [ 9.660957] calling 22_dapm_post_sequence_async+0x0/0xd8 @ 161
  4164. [ 9.660974] initcall 22_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4165. [ 9.660993] calling 23_dapm_post_sequence_async+0x0/0xd8 @ 5
  4166. [ 9.661011] calling 24_dapm_post_sequence_async+0x0/0xd8 @ 160
  4167. [ 9.661025] calling 25_dapm_post_sequence_async+0x0/0xd8 @ 161
  4168. [ 9.661039] initcall 23_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4169. [ 9.661055] initcall 25_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4170. [ 9.661070] initcall 24_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4171. [ 9.855522] async_continuing @ 1 after 0 usec
  4172. [ 9.958997] asoc: ac100-aif1 <-> sec_dai mapping ok
  4173. [ 10.055919] async_waiting @ 1
  4174. [ 10.055946] calling 26_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4175. [ 10.055963] initcall 26_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4176. [ 10.055981] calling 27_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4177. [ 10.055996] calling 29_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4178. [ 10.056012] calling 28_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4179. [ 10.056027] initcall 29_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 2 usecs
  4180. [ 10.056042] initcall 28_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4181. [ 10.056058] initcall 27_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4182. [ 10.152955] async_continuing @ 1 after 1 usec
  4183. [ 10.346404] async_waiting @ 1
  4184. [ 10.346426] calling 30_dapm_post_sequence_async+0x0/0xd8 @ 161
  4185. [ 10.346442] initcall 30_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4186. [ 10.346459] calling 31_dapm_post_sequence_async+0x0/0xd8 @ 5
  4187. [ 10.346476] calling 33_dapm_post_sequence_async+0x0/0xd8 @ 160
  4188. [ 10.346491] initcall 31_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4189. [ 10.346506] calling 32_dapm_post_sequence_async+0x0/0xd8 @ 161
  4190. [ 10.346521] initcall 33_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4191. [ 10.346536] initcall 32_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4192. [ 10.482296] async_continuing @ 1 after 1 usec
  4193. [ 10.487383] asoc: ac100-aif3 <-> bb-voice-dai mapping ok
  4194. [ 10.493388] async_waiting @ 1
  4195. [ 10.493409] calling 34_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4196. [ 10.493425] initcall 34_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4197. [ 10.493443] calling 35_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4198. [ 10.493458] calling 37_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4199. [ 10.493473] calling 36_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4200. [ 10.493488] initcall 37_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4201. [ 10.493504] initcall 35_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4202. [ 10.493519] initcall 36_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4203. [ 10.556007] async_continuing @ 1 after 1 usec
  4204. [ 10.560925] async_waiting @ 1
  4205. [ 10.560944] calling 38_dapm_post_sequence_async+0x0/0xd8 @ 5
  4206. [ 10.560960] initcall 38_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4207. [ 10.560978] calling 39_dapm_post_sequence_async+0x0/0xd8 @ 160
  4208. [ 10.560993] calling 41_dapm_post_sequence_async+0x0/0xd8 @ 161
  4209. [ 10.561007] calling 40_dapm_post_sequence_async+0x0/0xd8 @ 5
  4210. [ 10.561021] initcall 39_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4211. [ 10.561037] initcall 41_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4212. [ 10.561052] initcall 40_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4213. [ 10.624129] async_continuing @ 1 after 0 usec
  4214. [ 10.629186] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  4215. [ 10.635476] async_waiting @ 1
  4216. [ 10.635496] calling 42_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4217. [ 10.635512] initcall 42_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4218. [ 10.635529] calling 43_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4219. [ 10.635546] calling 44_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4220. [ 10.635560] calling 45_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4221. [ 10.635575] initcall 43_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4222. [ 10.635590] initcall 44_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4223. [ 10.635606] initcall 45_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 2 usecs
  4224. [ 10.697909] async_continuing @ 1 after 1 usec
  4225. [ 10.702825] async_waiting @ 1
  4226. [ 10.702846] calling 46_dapm_post_sequence_async+0x0/0xd8 @ 5
  4227. [ 10.702862] initcall 46_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4228. [ 10.702881] calling 47_dapm_post_sequence_async+0x0/0xd8 @ 160
  4229. [ 10.702896] calling 49_dapm_post_sequence_async+0x0/0xd8 @ 161
  4230. [ 10.702911] calling 48_dapm_post_sequence_async+0x0/0xd8 @ 5
  4231. [ 10.702925] initcall 49_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4232. [ 10.702940] initcall 47_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4233. [ 10.702956] initcall 48_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4234. [ 10.766039] async_continuing @ 1 after 0 usec
  4235. [ 10.770970] async_waiting @ 1
  4236. [ 10.770990] calling 50_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4237. [ 10.771005] initcall 50_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4238. [ 10.771024] calling 51_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4239. [ 10.771038] calling 52_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4240. [ 10.771054] calling 53_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4241. [ 10.771068] initcall 52_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4242. [ 10.771083] initcall 51_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4243. [ 10.771099] initcall 53_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4244. [ 10.833397] async_continuing @ 1 after 0 usec
  4245. [ 10.838287] async_waiting @ 1
  4246. [ 10.838308] calling 54_dapm_post_sequence_async+0x0/0xd8 @ 161
  4247. [ 10.838324] initcall 54_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4248. [ 10.838343] calling 55_dapm_post_sequence_async+0x0/0xd8 @ 160
  4249. [ 10.838359] calling 56_dapm_post_sequence_async+0x0/0xd8 @ 5
  4250. [ 10.838373] calling 57_dapm_post_sequence_async+0x0/0xd8 @ 161
  4251. [ 10.838387] initcall 56_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4252. [ 10.838403] initcall 55_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4253. [ 10.838418] initcall 57_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4254. [ 10.901681] async_continuing @ 1 after 0 usec
  4255. [ 10.908868] async_waiting @ 1
  4256. [ 10.908889] calling 58_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4257. [ 10.908905] initcall 58_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4258. [ 10.908923] calling 59_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4259. [ 10.908940] calling 60_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4260. [ 10.908955] initcall 59_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4261. [ 10.908971] calling 61_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4262. [ 10.908985] initcall 60_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4263. [ 10.909001] initcall 61_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4264. [ 10.971494] async_continuing @ 1 after 0 usec
  4265. [ 10.976389] async_waiting @ 1
  4266. [ 10.976410] calling 62_dapm_post_sequence_async+0x0/0xd8 @ 161
  4267. [ 10.976426] initcall 62_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4268. [ 10.976442] calling 63_dapm_post_sequence_async+0x0/0xd8 @ 5
  4269. [ 10.976459] calling 64_dapm_post_sequence_async+0x0/0xd8 @ 160
  4270. [ 10.976474] calling 65_dapm_post_sequence_async+0x0/0xd8 @ 161
  4271. [ 10.976488] initcall 63_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4272. [ 10.976504] initcall 64_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4273. [ 10.976519] initcall 65_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4274. [ 11.039825] async_continuing @ 1 after 0 usec
  4275. [ 11.047239] initcall bb_init+0x0/0x34 returned 0 after 2768854 usecs
  4276. [ 11.054304] calling sunxi_hdmiaudio_init+0x0/0x34 @ 1
  4277. [ 11.060336] initcall sunxi_hdmiaudio_init+0x0/0x34 returned 0 after 325 usecs
  4278. [ 11.068251] calling sunxi_soc_platform_hdmiaudio_init+0x0/0x34 @ 1
  4279. [ 11.075411] initcall sunxi_soc_platform_hdmiaudio_init+0x0/0x34 returned 0 after 182 usecs
  4280. [ 11.084596] calling sndhdmi_codec_init+0x0/0x34 @ 1
  4281. [ 11.090300] initcall sndhdmi_codec_init+0x0/0x34 returned 0 after 180 usecs
  4282. [ 11.098020] calling sunxi_sndhdmi_init+0x0/0x34 @ 1
  4283. [ 11.103881] async_waiting @ 1
  4284. [ 11.103897] calling 66_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4285. [ 11.103906] initcall 66_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4286. [ 11.103917] calling 67_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4287. [ 11.103926] calling 68_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4288. [ 11.103934] initcall 67_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4289. [ 11.103943] initcall 68_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4290. [ 11.151423] async_continuing @ 1 after 0 usec
  4291. [ 11.156262] async_waiting @ 1
  4292. [ 11.156277] calling 69_dapm_post_sequence_async+0x0/0xd8 @ 161
  4293. [ 11.156286] initcall 69_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4294. [ 11.156296] calling 70_dapm_post_sequence_async+0x0/0xd8 @ 160
  4295. [ 11.156305] calling 71_dapm_post_sequence_async+0x0/0xd8 @ 5
  4296. [ 11.156314] initcall 70_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4297. [ 11.156323] initcall 71_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4298. [ 11.204182] async_continuing @ 1 after 0 usec
  4299. [ 11.211329] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  4300. [ 11.217432] async_waiting @ 1
  4301. [ 11.217447] calling 72_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4302. [ 11.217456] initcall 72_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4303. [ 11.217467] calling 73_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4304. [ 11.217477] calling 74_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4305. [ 11.217486] initcall 73_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4306. [ 11.217495] initcall 74_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 1 usecs
  4307. [ 11.264777] async_continuing @ 1 after 0 usec
  4308. [ 11.269615] async_waiting @ 1
  4309. [ 11.269630] calling 75_dapm_post_sequence_async+0x0/0xd8 @ 161
  4310. [ 11.269639] initcall 75_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4311. [ 11.269649] calling 76_dapm_post_sequence_async+0x0/0xd8 @ 160
  4312. [ 11.269658] calling 77_dapm_post_sequence_async+0x0/0xd8 @ 161
  4313. [ 11.269666] initcall 76_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4314. [ 11.269674] initcall 77_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4315. [ 11.317733] async_continuing @ 1 after 0 usec
  4316. [ 11.322589] async_waiting @ 1
  4317. [ 11.322603] calling 78_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4318. [ 11.322612] initcall 78_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4319. [ 11.322623] calling 79_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4320. [ 11.322631] calling 80_dapm_pre_sequence_async+0x0/0xa0 @ 161
  4321. [ 11.322639] initcall 79_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4322. [ 11.322648] initcall 80_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4323. [ 11.370124] async_continuing @ 1 after 0 usec
  4324. [ 11.374961] async_waiting @ 1
  4325. [ 11.374975] calling 81_dapm_post_sequence_async+0x0/0xd8 @ 161
  4326. [ 11.374984] initcall 81_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4327. [ 11.374994] calling 82_dapm_post_sequence_async+0x0/0xd8 @ 160
  4328. [ 11.375004] calling 83_dapm_post_sequence_async+0x0/0xd8 @ 5
  4329. [ 11.375012] initcall 82_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4330. [ 11.375021] initcall 83_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4331. [ 11.422880] async_continuing @ 1 after 0 usec
  4332. [ 11.428062] async_waiting @ 1
  4333. [ 11.428076] calling 84_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4334. [ 11.428085] initcall 84_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4335. [ 11.428095] calling 85_dapm_pre_sequence_async+0x0/0xa0 @ 160
  4336. [ 11.428103] calling 86_dapm_pre_sequence_async+0x0/0xa0 @ 5
  4337. [ 11.428111] initcall 85_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4338. [ 11.428120] initcall 86_dapm_pre_sequence_async+0x0/0xa0 returned 0 after 0 usecs
  4339. [ 11.475213] async_continuing @ 1 after 0 usec
  4340. [ 11.480064] async_waiting @ 1
  4341. [ 11.480078] calling 87_dapm_post_sequence_async+0x0/0xd8 @ 5
  4342. [ 11.480087] initcall 87_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4343. [ 11.480099] calling 88_dapm_post_sequence_async+0x0/0xd8 @ 160
  4344. [ 11.480108] calling 89_dapm_post_sequence_async+0x0/0xd8 @ 5
  4345. [ 11.480116] initcall 88_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4346. [ 11.480125] initcall 89_dapm_post_sequence_async+0x0/0xd8 returned 0 after 0 usecs
  4347. [ 11.527792] async_continuing @ 1 after 0 usec
  4348. [ 11.532662] initcall sunxi_sndhdmi_init+0x0/0x34 returned 0 after 419061 usecs
  4349. [ 11.540686] calling sock_diag_init+0x0/0x54 @ 1
  4350. [ 11.545859] initcall sock_diag_init+0x0/0x54 returned 0 after 52 usecs
  4351. [ 11.553114] calling flow_cache_init_global+0x0/0x1b0 @ 1
  4352. [ 11.559193] initcall flow_cache_init_global+0x0/0x1b0 returned 0 after 87 usecs
  4353. [ 11.567315] calling blackhole_module_init+0x0/0x1c @ 1
  4354. [ 11.573131] initcall blackhole_module_init+0x0/0x1c returned 0 after 2 usecs
  4355. [ 11.580963] calling cbq_module_init+0x0/0x1c @ 1
  4356. [ 11.586180] initcall cbq_module_init+0x0/0x1c returned 0 after 1 usecs
  4357. [ 11.593431] calling htb_module_init+0x0/0x1c @ 1
  4358. [ 11.598647] initcall htb_module_init+0x0/0x1c returned 0 after 1 usecs
  4359. [ 11.605899] calling tbf_module_init+0x0/0x1c @ 1
  4360. [ 11.611128] initcall tbf_module_init+0x0/0x1c returned 0 after 1 usecs
  4361. [ 11.618367] calling prio_module_init+0x0/0x1c @ 1
  4362. [ 11.623692] initcall prio_module_init+0x0/0x1c returned 0 after 1 usecs
  4363. [ 11.631038] calling sysctl_ipv4_init+0x0/0x9c @ 1
  4364. [ 11.636489] initcall sysctl_ipv4_init+0x0/0x9c returned 0 after 135 usecs
  4365. [ 11.644032] calling ipip_init+0x0/0x68 @ 1
  4366. [ 11.648666] IPv4 over IPv4 tunneling driver
  4367. [ 11.653685] initcall ipip_init+0x0/0x68 returned 0 after 4897 usecs
  4368. [ 11.660655] calling init_syncookies+0x0/0x24 @ 1
  4369. [ 11.665951] initcall init_syncookies+0x0/0x24 returned 0 after 79 usecs
  4370. [ 11.673300] calling ah4_init+0x0/0x80 @ 1
  4371. [ 11.677843] initcall ah4_init+0x0/0x80 returned 0 after 3 usecs
  4372. [ 11.684419] calling esp4_init+0x0/0x80 @ 1
  4373. [ 11.689056] initcall esp4_init+0x0/0x80 returned 0 after 1 usecs
  4374. [ 11.695729] calling ipcomp4_init+0x0/0x80 @ 1
  4375. [ 11.700669] initcall ipcomp4_init+0x0/0x80 returned 0 after 1 usecs
  4376. [ 11.707617] calling ipip_init+0x0/0xb0 @ 1
  4377. [ 11.712268] initcall ipip_init+0x0/0xb0 returned 0 after 2 usecs
  4378. [ 11.718928] calling xfrm4_beet_init+0x0/0x20 @ 1
  4379. [ 11.724157] initcall xfrm4_beet_init+0x0/0x20 returned 0 after 1 usecs
  4380. [ 11.731408] calling tunnel4_init+0x0/0x74 @ 1
  4381. [ 11.736334] initcall tunnel4_init+0x0/0x74 returned 0 after 1 usecs
  4382. [ 11.743295] calling xfrm4_transport_init+0x0/0x20 @ 1
  4383. [ 11.748993] initcall xfrm4_transport_init+0x0/0x20 returned 0 after 1 usecs
  4384. [ 11.756725] calling xfrm4_mode_tunnel_init+0x0/0x20 @ 1
  4385. [ 11.762628] initcall xfrm4_mode_tunnel_init+0x0/0x20 returned 0 after 0 usecs
  4386. [ 11.770556] calling ipv4_netfilter_init+0x0/0x24 @ 1
  4387. [ 11.776158] initcall ipv4_netfilter_init+0x0/0x24 returned 0 after 2 usecs
  4388. [ 11.783794] calling bictcp_register+0x0/0x1c @ 1
  4389. [ 11.789008] TCP: bic registered
  4390. [ 11.792501] initcall bictcp_register+0x0/0x1c returned 0 after 3410 usecs
  4391. [ 11.800041] calling cubictcp_register+0x0/0x78 @ 1
  4392. [ 11.805446] TCP: cubic registered
  4393. [ 11.809118] initcall cubictcp_register+0x0/0x78 returned 0 after 3584 usecs
  4394. [ 11.816851] calling tcp_westwood_register+0x0/0x1c @ 1
  4395. [ 11.822654] TCP: westwood registered
  4396. [ 11.826616] initcall tcp_westwood_register+0x0/0x1c returned 0 after 3866 usecs
  4397. [ 11.834738] calling hstcp_register+0x0/0x1c @ 1
  4398. [ 11.839854] TCP: highspeed registered
  4399. [ 11.843925] initcall hstcp_register+0x0/0x1c returned 0 after 3973 usecs
  4400. [ 11.851367] calling hybla_register+0x0/0x1c @ 1
  4401. [ 11.856483] TCP: hybla registered
  4402. [ 11.860168] initcall hybla_register+0x0/0x1c returned 0 after 3596 usecs
  4403. [ 11.867598] calling htcp_register+0x0/0x1c @ 1
  4404. [ 11.872631] TCP: htcp registered
  4405. [ 11.876207] initcall htcp_register+0x0/0x1c returned 0 after 3490 usecs
  4406. [ 11.883554] calling tcp_vegas_register+0x0/0x20 @ 1
  4407. [ 11.889055] TCP: vegas registered
  4408. [ 11.892741] initcall tcp_vegas_register+0x0/0x20 returned 0 after 3596 usecs
  4409. [ 11.900570] calling tcp_veno_register+0x0/0x20 @ 1
  4410. [ 11.905975] TCP: veno registered
  4411. [ 11.909550] initcall tcp_veno_register+0x0/0x20 returned 0 after 3489 usecs
  4412. [ 11.917283] calling tcp_scalable_register+0x0/0x1c @ 1
  4413. [ 11.923088] TCP: scalable registered
  4414. [ 11.927050] initcall tcp_scalable_register+0x0/0x1c returned 0 after 3866 usecs
  4415. [ 11.935168] calling tcp_lp_register+0x0/0x1c @ 1
  4416. [ 11.940394] TCP: lp registered
  4417. [ 11.943777] initcall tcp_lp_register+0x0/0x1c returned 0 after 3302 usecs
  4418. [ 11.951317] calling tcp_yeah_register+0x0/0x20 @ 1
  4419. [ 11.956722] TCP: yeah registered
  4420. [ 11.960311] initcall tcp_yeah_register+0x0/0x20 returned 0 after 3502 usecs
  4421. [ 11.968030] calling tcp_illinois_register+0x0/0x1c @ 1
  4422. [ 11.973834] TCP: illinois registered
  4423. [ 11.977796] initcall tcp_illinois_register+0x0/0x1c returned 0 after 3867 usecs
  4424. [ 11.985940] calling xfrm_user_init+0x0/0x50 @ 1
  4425. [ 11.991072] Initializing XFRM netlink socket
  4426. [ 11.995821] initcall xfrm_user_init+0x0/0x50 returned 0 after 4634 usecs
  4427. [ 12.003267] calling inet6_init+0x0/0x2cc @ 1
  4428. [ 12.008505] NET: Registered protocol family 10
  4429. [ 12.014343] initcall inet6_init+0x0/0x2cc returned 0 after 6096 usecs
  4430. [ 12.021513] calling packet_init+0x0/0x50 @ 1
  4431. [ 12.026341] NET: Registered protocol family 17
  4432. [ 12.031300] initcall packet_init+0x0/0x50 returned 0 after 4840 usecs
  4433. [ 12.038442] calling ipsec_pfkey_init+0x0/0x80 @ 1
  4434. [ 12.043776] NET: Registered protocol family 15
  4435. [ 12.048703] initcall ipsec_pfkey_init+0x0/0x80 returned 0 after 4820 usecs
  4436. [ 12.056341] calling rfcomm_init+0x0/0x10c @ 1
  4437. [ 12.061448] Bluetooth: RFCOMM TTY layer initialized
  4438. [ 12.066863] Bluetooth: RFCOMM socket layer initialized
  4439. [ 12.072575] Bluetooth: RFCOMM ver 1.11
  4440. [ 12.076730] initcall rfcomm_init+0x0/0x10c returned 0 after 15089 usecs
  4441. [ 12.084079] calling bnep_init+0x0/0x90 @ 1
  4442. [ 12.088713] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  4443. [ 12.094619] Bluetooth: BNEP filters: protocol multicast
  4444. [ 12.100428] initcall bnep_init+0x0/0x90 returned 0 after 11437 usecs
  4445. [ 12.107473] calling hidp_init+0x0/0x5c @ 1
  4446. [ 12.112121] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  4447. [ 12.118769] initcall hidp_init+0x0/0x5c returned 0 after 6490 usecs
  4448. [ 12.125735] calling init_rpcsec_gss+0x0/0x6c @ 1
  4449. [ 12.131003] initcall init_rpcsec_gss+0x0/0x6c returned 0 after 41 usecs
  4450. [ 12.138330] calling init_kerberos_module+0x0/0x34 @ 1
  4451. [ 12.144049] initcall init_kerberos_module+0x0/0x34 returned 0 after 6 usecs
  4452. [ 12.151783] calling rfkill_gpio_driver_init+0x0/0x1c @ 1
  4453. [ 12.157896] initcall rfkill_gpio_driver_init+0x0/0x1c returned 0 after 122 usecs
  4454. [ 12.166113] calling init_dns_resolver+0x0/0x150 @ 1
  4455. [ 12.171629] Registering the dns_resolver key type
  4456. [ 12.176878] initcall init_dns_resolver+0x0/0x150 returned 0 after 5122 usecs
  4457. [ 12.184710] calling init_ceph_lib+0x0/0x74 @ 1
  4458. [ 12.189761] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
  4459. [ 12.196534] initcall init_ceph_lib+0x0/0x74 returned 0 after 6642 usecs
  4460. [ 12.204096] calling vfp_init+0x0/0x18c @ 1
  4461. [ 12.208750] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  4462. [ 12.217271] initcall vfp_init+0x0/0x18c returned 0 after 8337 usecs
  4463. [ 12.224236] calling thumbee_init+0x0/0x64 @ 1
  4464. [ 12.229159] ThumbEE CPU extension supported.
  4465. [ 12.233904] initcall thumbee_init+0x0/0x64 returned 0 after 4630 usecs
  4466. [ 12.241158] calling swp_emulation_init+0x0/0x5c @ 1
  4467. [ 12.246672] Registering SWP/SWPB emulation handler
  4468. [ 12.251999] initcall swp_emulation_init+0x0/0x5c returned 0 after 5211 usecs
  4469. [ 12.259817] calling sram_proc_init+0x0/0x5c @ 1
  4470. [ 12.264959] initcall sram_proc_init+0x0/0x5c returned 0 after 12 usecs
  4471. [ 12.272212] calling sunxi_bootup_extend_init+0x0/0x80 @ 1
  4472. [ 12.278301] sunxi_bootup_extend_init: bootup extend disable(default)
  4473. [ 12.285361] initcall sunxi_bootup_extend_init+0x0/0x80 returned -1 after 6901 usecs
  4474. [ 12.293868] initcall sunxi_bootup_extend_init+0x0/0x80 returned with error code -1
  4475. [ 12.302374] calling init_oops_id+0x0/0x4c @ 1
  4476. [ 12.307311] initcall init_oops_id+0x0/0x4c returned 0 after 11 usecs
  4477. [ 12.314371] calling printk_late_init+0x0/0x78 @ 1
  4478. [ 12.319685] initcall printk_late_init+0x0/0x78 returned 0 after 2 usecs
  4479. [ 12.327033] calling sched_init_debug+0x0/0x40 @ 1
  4480. [ 12.332370] initcall sched_init_debug+0x0/0x40 returned 0 after 11 usecs
  4481. [ 12.339801] calling pm_qos_power_init+0x0/0x68 @ 1
  4482. [ 12.345603] initcall pm_qos_power_init+0x0/0x68 returned 0 after 348 usecs
  4483. [ 12.353254] calling pm_debugfs_init+0x0/0x40 @ 1
  4484. [ 12.358480] initcall pm_debugfs_init+0x0/0x40 returned 0 after 9 usecs
  4485. [ 12.365733] calling wakeup_reason_init+0x0/0xc0 @ 1
  4486. [ 12.371264] initcall wakeup_reason_init+0x0/0xc0 returned 0 after 13 usecs
  4487. [ 12.378889] calling taskstats_init+0x0/0x88 @ 1
  4488. [ 12.384039] registered taskstats version 1
  4489. [ 12.388580] initcall taskstats_init+0x0/0x88 returned 0 after 4454 usecs
  4490. [ 12.396027] calling clear_boot_tracer+0x0/0x3c @ 1
  4491. [ 12.401448] initcall clear_boot_tracer+0x0/0x3c returned 0 after 0 usecs
  4492. [ 12.408879] calling add_shrinker_debug+0x0/0x40 @ 1
  4493. [ 12.414405] initcall add_shrinker_debug+0x0/0x40 returned 0 after 9 usecs
  4494. [ 12.421948] calling max_swapfiles_check+0x0/0x14 @ 1
  4495. [ 12.427548] initcall max_swapfiles_check+0x0/0x14 returned 0 after 0 usecs
  4496. [ 12.435184] calling random32_reseed+0x0/0xb4 @ 1
  4497. [ 12.440490] initcall random32_reseed+0x0/0xb4 returned 0 after 82 usecs
  4498. [ 12.447825] calling hdmi_module_init+0x0/0x150 @ 1
  4499. [ 12.453618] cmdline,disp=3
  4500. [ 12.456723] [HDMI] power vcc-hdmi-18
  4501. [ 12.461100] initcall hdmi_module_init+0x0/0x150 returned 0 after 7665 usecs
  4502. [ 12.468822] calling regulator_init_complete+0x0/0x14c @ 1
  4503. [ 12.475464] initcall regulator_init_complete+0x0/0x14c returned 0 after 514 usecs
  4504. [ 12.483783] calling random_int_secret_init+0x0/0x24 @ 1
  4505. [ 12.489710] initcall random_int_secret_init+0x0/0x24 returned 0 after 36 usecs
  4506. [ 12.497736] calling deferred_probe_initcall+0x0/0x84 @ 1
  4507. [ 12.503866] initcall deferred_probe_initcall+0x0/0x84 returned 0 after 125 usecs
  4508. [ 12.512093] calling sync_debugfs_init+0x0/0x40 @ 1
  4509. [ 12.517514] initcall sync_debugfs_init+0x0/0x40 returned 0 after 12 usecs
  4510. [ 12.525060] calling scsi_complete_async_scans+0x0/0x11c @ 1
  4511. [ 12.531350] initcall scsi_complete_async_scans+0x0/0x11c returned 0 after 0 usecs
  4512. [ 12.539649] calling init_netconsole+0x0/0x210 @ 1
  4513. [ 12.545048] console [netcon0] enabled
  4514. [ 12.549104] netconsole: network logging started
  4515. [ 12.554154] initcall init_netconsole+0x0/0x210 returned 0 after 8964 usecs
  4516. [ 12.561793] calling rtc_hctosys+0x0/0x118 @ 1
  4517. [ 12.567039] rtc_gettime(333): read time 1970-1-1 1:0:22
  4518. [ 12.572886] rtc0 rtc0: setting system clock to 1970-01-01 01:00:22 UTC (3622)
  4519. [ 12.580814] initcall rtc_hctosys+0x0/0x118 returned 0 after 13764 usecs
  4520. [ 12.588149] calling android_bat_init+0x0/0x1c @ 1
  4521. [ 12.593579] initcall android_bat_init+0x0/0x1c returned 0 after 101 usecs
  4522. [ 12.601122] calling sunxi_ths_init+0x0/0x4f4 @ 1
  4523. [ 12.607177] initcall sunxi_ths_init+0x0/0x4f4 returned 0 after 816 usecs
  4524. [ 12.614631] calling sunxi_cpu_budget_cooling_init+0x0/0x444 @ 1
  4525. [ 12.621308] sunxi_get_soc_bin: slow chip
  4526. [ 12.626132] CPU Budget:Register notifier
  4527. [ 12.630544] CPU Budget:register Success
  4528. [ 12.634850] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  4529. [ 12.644835] initcall sunxi_cpu_budget_cooling_init+0x0/0x444 returned 0 after 22976 usecs
  4530. [ 12.653935] calling debug_init+0x0/0xfc @ 1
  4531. [ 12.658708] initcall debug_init+0x0/0xfc returned 0 after 38 usecs
  4532. [ 12.665576] calling clk_debug_init+0x0/0xc4 @ 1
  4533. [ 12.674318] initcall clk_debug_init+0x0/0xc4 returned 0 after 3514 usecs
  4534. [ 12.681787] calling debugfs_test_init+0x0/0x120 @ 1
  4535. [ 12.687344] initcall debugfs_test_init+0x0/0x120 returned 0 after 49 usecs
  4536. [ 12.694986] calling net_secret_init+0x0/0x24 @ 1
  4537. [ 12.700306] initcall net_secret_init+0x0/0x24 returned 0 after 49 usecs
  4538. [ 12.707643] calling tcp_congestion_default+0x0/0x1c @ 1
  4539. [ 12.713555] initcall tcp_congestion_default+0x0/0x1c returned 0 after 3 usecs
  4540. [ 12.721490] calling ip_auto_config+0x0/0xf08 @ 1
  4541. [ 12.726731] initcall ip_auto_config+0x0/0xf08 returned 0 after 24 usecs
  4542. [ 12.734084] calling gps_init+0x0/0x1b4 @ 1
  4543. [ 12.738725] =========GPS========= :gsp not used in configuration
  4544. [ 12.745401] initcall gps_init+0x0/0x1b4 returned -1 after 6522 usecs
  4545. [ 12.752459] initcall gps_init+0x0/0x1b4 returned with error code -1
  4546. [ 12.759505] calling alsa_sound_last_init+0x0/0x74 @ 1
  4547. [ 12.765212] ALSA device list:
  4548. [ 12.768497] #0: snddaudio
  4549. [ 12.771600] #1: sndhdmi
  4550. [ 12.774502] initcall alsa_sound_last_init+0x0/0x74 returned 0 after 9069 usecs
  4551. [ 12.782525] calling initialize_hashrnd+0x0/0x24 @ 1
  4552. [ 12.788039] initcall initialize_hashrnd+0x0/0x24 returned 0 after 10 usecs
  4553. [ 12.796245] async_waiting @ 1
  4554. [ 12.799533] async_continuing @ 1 after 1 usec
  4555. [ 12.890712] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  4556. [ 13.040543] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  4557. [ 13.070054] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
  4558. [ 13.151008] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
  4559. [ 13.159354] VFS: Mounted root (ext4 filesystem) on device 179:2.
  4560. [ 13.174265] devtmpfs: mounted
  4561. [ 13.177592] async_waiting @ 1
  4562. [ 13.180905] async_continuing @ 1 after 1 usec
  4563. [ 13.186236] Freeing init memory: 408K
  4564. [ 13.190370] Failed to execute /init. Attempting defaults...
  4565. [ 13.495892] systemd[1]: System time before build time, advancing clock.
  4566. [ 14.230293] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  4567. [ 14.250575] systemd[1]: Detected architecture arm.
  4568. [ 14.281156] systemd[1]: Set hostname to <bpi-iot-ros-ai>.
  4569. [ 14.725432] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  4570. [ 14.750235] systemd[1]: Reached target Swap.
  4571. [ 14.770400] systemd[1]: Listening on Journal Socket (/dev/log).
  4572. [ 14.800369] systemd[1]: Listening on udev Control Socket.
  4573. [ 14.830643] systemd[1]: Created slice User and Session Slice.
  4574. [ 14.860464] systemd[1]: Listening on Journal Audit Socket.
  4575. [ 14.890540] systemd[1]: Created slice System Slice.
  4576. [ 14.910608] systemd[1]: Created slice system-serial\x2dgetty.slice.
  4577. [ 14.940164] systemd[1]: Reached target User and Group Name Lookups.
  4578. [ 14.970742] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  4579. [ 15.000310] systemd[1]: Listening on Syslog Socket.
  4580. [ 15.020582] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  4581. [ 15.050244] systemd[1]: Reached target Slices.
  4582. [ 15.070467] systemd[1]: Listening on Journal Socket.
  4583. [ 15.160912] systemd[1]: Starting Load Kernel Modules...
  4584. [ 15.350433] systemd[1]: Mounting Debug File System...
  4585. [ 15.541062] systemd[1]: Started Read required files in advance.
  4586. [ 15.681273] systemd[1]: Starting Journal Service...
  4587. [ 15.821127] systemd[1]: Starting Set console keymap...
  4588. [ 16.011197] systemd[1]: Started Braille Device Support.
  4589. [ 16.181645] systemd[1]: Starting Uncomplicated firewall...
  4590. [ 16.420712] systemd[1]: Mounting POSIX Message Queue File System...
  4591. [ 16.561754] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  4592. [ 16.590987] systemd[1]: Listening on fsck to fsckd communication Socket.
  4593. [ 16.620603] systemd[1]: Reached target Remote File Systems (Pre).
  4594. [ 16.650492] systemd[1]: Reached target Remote File Systems.
  4595. [ 16.680478] systemd[1]: Reached target Encrypted Volumes.
  4596. [ 16.811230] systemd[1]: Starting Nameserver information manager...
  4597. [ 16.841035] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  4598. [ 16.951520] systemd[1]: Starting Restore / save the current clock...
  4599. [ 16.981039] systemd[1]: Listening on udev Kernel Socket.
  4600. [ 17.117475] systemd[1]: Mounted POSIX Message Queue File System.
  4601. [ 17.150802] systemd[1]: Mounted Debug File System.
  4602. [ 17.171365] systemd[1]: Started Journal Service.
  4603. [ 22.387012] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  4604. [ 23.488031] systemd-journald[191]: Received request to flush runtime journal from PID 1
  4605. [ 24.256768] calling spidev_init+0x0/0xc4 [spidev] @ 563
  4606. [ 24.264853] initcall spidev_init+0x0/0xc4 [spidev] returned 0 after 688 usecs
  4607. [ 24.358906] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4608. [ 24.418282] calling option_driver_init+0x0/0x24 [option] @ 563
  4609. [ 24.430726] usbcore: registered new interface driver option
  4610. [ 24.439770] USB Serial support registered for GSM modem (1-port)
  4611. [ 24.447149] initcall option_driver_init+0x0/0x24 [option] returned 0 after 16277 usecs
  4612. [ 24.530793] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4613. [ 24.545399] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4614. [ 24.558150] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4615. [ 24.568832] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4616. [ 24.580619] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4617. [ 24.596746] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4618. [ 24.607948] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4619. [ 24.620730] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4620. [ 24.632309] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4621. [ 24.642734] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4622. [ 24.654545] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4623. [ 24.670789] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4624. [ 24.682883] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4625. [ 24.693714] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4626. [ 24.704881] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4627. [ 24.716360] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4628. [ 24.731060] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4629. [ 24.741915] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4630. [ 24.755273] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4631. [ 24.769944] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4632. [ 24.781032] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4633. [ 24.793207] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4634. [ 24.807919] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4635. [ 24.820458] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4636. [ 24.832507] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4637. [ 24.843346] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4638. [ 24.864649] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4639. [ 24.875558] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4640. [ 24.887841] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4641. [ 24.898597] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4642. [ 24.910529] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4643. [ 24.922771] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4644. [ 24.941240] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4645. [ 24.941877] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4646. [ 24.945355] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4647. [ 24.945899] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4648. [ 24.946664] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4649. [ 24.947236] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4650. [ 24.947761] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4651. [ 24.948188] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4652. [ 24.950152] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  4653. [ 25.394707] [rfkill]: rfkill set power 1
  4654. [ 37.996497] gmac0: probed
  4655. [ 38.030617] gmac0 gmac0: eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (gmac0-0:00)
  4656. [ 39.687512] calling PVRSRVDrmInit+0x0/0x50 [pvrsrvkm] @ 1954
  4657. [ 39.698346] sunxi_get_soc_bin: slow chip
  4658. [ 39.702997] PVR_K:(Error): gpu_sgx54tf0_temp: tf0_temp in sys_config.fex is invalid!
  4659.  
  4660. [ 39.713628] PVR_K:(Error): gpu_sgx54tf0_freq: tf0_freq in sys_config.fex is invalid!
  4661.  
  4662. [ 39.724206] PVR_K:(Error): gpu_sgx54tf1_temp: tf1_temp in sys_config.fex is invalid!
  4663.  
  4664. [ 39.734708] PVR_K:(Error): gpu_sgx54tf1_freq: tf1_freq in sys_config.fex is invalid!
  4665.  
  4666. [ 39.748110] #PVR_DBG: SGX Core Version Information: SGX544
  4667. [ 39.754407] #PVR_DBG: SGX Multi-processor: 1 cores
  4668. [ 39.759843] #PVR_DBG: SGX Core Revision Information: 115
  4669. [ 39.765924] #PVR_DBG: SGX System Level Cache is present
  4670.  
  4671. [ 39.773707] #PVR_DBG: SGX Initialisation Part 1
  4672. [ 39.779370] #####: Device 0: Framebuffer physical address: 0xb8200000
  4673. [ 39.786751] [drm] Initialized pvr 1.14.3841212 20110701 on minor 0
  4674. [ 39.794131] initcall PVRSRVDrmInit+0x0/0x50 [pvrsrvkm] returned 0 after 97375 usecs
  4675. [ 40.126593] calling dhd_module_init+0x0/0x158 [bcmdhd] @ 1984
  4676. [ 40.133266] dhd_module_init: in
  4677. [ 40.136806] ======== bcm_wlan_set_plat_data ========
  4678. [ 40.142552] GPIO(WL_HOST_WAKE) = 355
  4679. [ 40.146745] host_oob_irq: 3
  4680. [ 40.150194] host_oob_irq_flags=1044
  4681. [ 40.154132] dhd_wifi_platform_load: Enter
  4682. [ 40.158686] Power-up adapter 'DHD generic adapter'
  4683. [ 40.164352] wifi_platform_set_power = 1
  4684. [ 40.168672] ======== PULL WL_REG_ON HIGH! ========
  4685. [ 40.174157] [wifi_pm]: wifi power on
  4686. [ 40.480103] wifi_platform_bus_enumerate device present 1
  4687. [ 40.486103] ======== Card detection to detect SDIO card! ========
  4688. [ 40.493154] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4689. [ 40.504610] [mmc]: sdc1 power_supply is null
  4690. [ 40.530143] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4691. [ 40.562520] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 1 err, cmd 52, RTO !!
  4692. [ 40.571743] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 1 err, cmd 52, RTO !!
  4693. [ 40.580175] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4694. [ 40.593248] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4695. [ 40.605778] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 1 err, cmd 8, RTO !!
  4696. [ 40.614053] *******************Try sdio*******************
  4697. [ 40.620703] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  4698. [ 40.641551] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  4699. [ 40.649548] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  4700. [ 40.657510] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  4701. [ 40.666902] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  4702. [ 40.770854] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  4703. [ 40.781502] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  4704. [ 40.792375] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  4705. [ 40.807602] mmc2: new high speed SDIO card at address 0001
  4706. [ 40.815919] *******************sdio init ok*******************
  4707. [ 40.832266] bcmsdh_register: register client driver
  4708. [ 40.838040] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  4709. [ 40.843883] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  4710. [ 40.849358] bus num (host idx)=2, slot num (rca)=1
  4711. [ 40.854878] found adapter info 'DHD generic adapter'
  4712. [ 40.862043] dhdsdio_probe : no mutex held. set lock
  4713. [ 40.867924] F1 signature read @0x18000000=0x1540a9a6
  4714. [ 40.881205] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
  4715. [ 40.891475] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  4716. [ 40.899325] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
  4717. [ 40.905644] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
  4718. [ 40.932222] wl_create_event_handler(): thread:wl_event_handler:7d9 started
  4719. [ 40.932665] tsk Enter, tsk = 0xec5e1430
  4720. [ 40.947614] dhd_attach(): thread:dhd_watchdog_thread:7db started
  4721. [ 40.955034] dhd_attach(): thread:dhd_dpc:7dd started
  4722. [ 40.955111] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
  4723. [ 40.968662] dhd_attach(): thread:dhd_rxf:7de started
  4724. [ 40.974429] dhd_deferred_work_init: work queue initialized
  4725. [ 40.981593] dhdsdio_probe_init: set use_rxchain 1 from config.txt
  4726. [ 41.026828] Dongle Host Driver, version 1.201.59.3 (r506368)
  4727. [ 41.026849] Compiled in drivers/net/wireless/bcmdhd on Dec 13 2017 at 19:35:09
  4728. [ 41.045346] Register interface [wlan0] MAC: e0:76:d0:2d:df:63
  4729.  
  4730. [ 41.068125] dhd_prot_ioctl : bus is down. we have nothing to do
  4731. [ 41.075069] bcmsdh_oob_intr_unregister: Enter
  4732. [ 41.079972] bcmsdh_oob_intr_unregister: irq is not registered
  4733. [ 41.086654] dhd_txglom_enable: enable 0
  4734. [ 41.091097] dhd_bus_devreset: WLAN OFF DONE
  4735. [ 41.096128] wifi_platform_set_power = 0
  4736. [ 41.101512] ======== PULL WL_REG_ON LOW! ========
  4737. [ 41.106859] [wifi_pm]: wifi power off
  4738. [ 41.106894] dhdsdio_probe : the lock is released.
  4739. [ 41.107234] dhd_module_init: Exit err=0
  4740. [ 41.107568] initcall dhd_module_init+0x0/0x158 [bcmdhd] returned 0 after 951167 usecs
  4741. [ 41.157524] PVR_K: UM DDK-(3841212) and KM DDK-(3841212) match. [ OK ]
  4742. [ 41.165479] #PVR_DBG: SGXGetInfoForSrvinit
  4743. [ 41.222367] dhd_open: Enter ee0dd800
  4744.  
  4745. [ 41.226447] Dongle Host Driver, version 1.201.59.3 (r506368)
  4746. [ 41.226461] Compiled in drivers/net/wireless/bcmdhd on Dec 13 2017 at 19:35:09
  4747. [ 41.232075] #PVR_DBG: SGX Initialisation Part 2
  4748. [ 41.232190] #PVR_DBG: Initialise Kernel CCB
  4749. [ 41.232420] #PVR_DBG: Initialise Kernel CCB Control
  4750. [ 41.232541] #PVR_DBG: Initialise Kernel CCB Event Kicker
  4751. [ 41.233674] #PVR_DBG: SGX initialisation script part 1
  4752. [ 41.233729] #PVR_DBG: SGXRunScript: Write HW reg operation
  4753. [ 41.233779] #PVR_DBG: WRW: SGXREG: Reg: 0x00004000 Data: 0x00000000
  4754. [ 41.233833] #PVR_DBG: SGXRunScript: Read HW reg operation
  4755. [ 41.233882] #PVR_DBG: RDW: SGXREG: Reg: 0x00004000
  4756. [ 41.233931] #PVR_DBG: SGXRunScript: Write HW reg operation
  4757. [ 41.233994] #PVR_DBG: WRW: SGXREG: Reg: 0x00004020 Data: 0x000002AA
  4758. [ 41.234044] #PVR_DBG: SGXRunScript: Read HW reg operation
  4759. [ 41.234078] #PVR_DBG: RDW: SGXREG: Reg: 0x00004020
  4760. [ 41.234119] #PVR_DBG: SGXRunScript: Write HW reg operation
  4761. [ 41.234156] #PVR_DBG: WRW: SGXREG: Reg: 0x00004004 Data: 0x00000002
  4762. [ 41.234200] #PVR_DBG: End of SGX initialisation script part 1
  4763. [ 41.235001] #PVR_DBG: SGX initialisation script part 2
  4764. [ 41.235039] #PVR_DBG: SGXRunScript: Write HW reg operation
  4765. [ 41.235075] #PVR_DBG: WRW: SGXREG: Reg: 0x00000130 Data: 0x00004000
  4766. [ 41.235126] #PVR_DBG: SGXRunScript: Write HW reg operation
  4767. [ 41.235172] #PVR_DBG: WRW: SGXREG: Reg: 0x00000110 Data: 0x00000000
  4768. [ 41.235230] #PVR_DBG: SGXRunScript: Write HW reg operation
  4769. [ 41.235283] #PVR_DBG: WRW: SGXREG: Reg: 0x0000013C Data: 0x00000000
  4770. [ 41.235342] #PVR_DBG: SGXRunScript: Write HW reg operation
  4771. [ 41.235390] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A7C Data: 0x00000000
  4772. [ 41.235441] #PVR_DBG: SGXRunScript: Write HW reg operation
  4773. [ 41.235492] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A80 Data: 0x00000000
  4774. [ 41.235541] #PVR_DBG: SGXRunScript: Write HW reg operation
  4775. [ 41.235581] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A74 Data: 0x00208200
  4776. [ 41.235629] #PVR_DBG: SGXRunScript: Write HW reg operation
  4777. [ 41.235669] #PVR_DBG: WRW: SGXREG: Reg: 0x00000ABC Data: 0x00000040
  4778. [ 41.235722] #PVR_DBG: SGXRunScript: Write HW reg operation
  4779. [ 41.235762] #PVR_DBG: WRW: SGXREG: Reg: 0x00000AB8 Data: 0x00000001
  4780. [ 41.235802] #PVR_DBG: SGXRunScript: Write HW reg operation
  4781. [ 41.235836] #PVR_DBG: WRW: SGXREG: Reg: 0x00000800 Data: 0x00000010
  4782. [ 41.235884] #PVR_DBG: SGXRunScript: Write HW reg operation
  4783. [ 41.235929] #PVR_DBG: WRW: SGXREG: Reg: 0x00000818 Data: 0x00000000
  4784. [ 41.235980] #PVR_DBG: SGXRunScript: Write HW reg operation
  4785. [ 41.236021] #PVR_DBG: WRW: SGXREG: Reg: 0x00000804 Data: 0x00000C00
  4786. [ 41.236071] #PVR_DBG: SGXRunScript: Write HW reg operation
  4787. [ 41.236106] #PVR_DBG: WRW: SGXREG: Reg: 0x00000814 Data: 0x0000FFFF
  4788. [ 41.236155] #PVR_DBG: SGXRunScript: Write HW reg operation
  4789. [ 41.236209] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A00 Data: 0x0007C000
  4790. [ 41.236258] #PVR_DBG: SGXRunScript: Write HW reg operation
  4791. [ 41.236294] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A0C Data: 0x07E40000
  4792. [ 41.236346] #PVR_DBG: SGXRunScript: Write HW reg operation
  4793. [ 41.236393] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A10 Data: 0x07E60000
  4794. [ 41.236448] #PVR_DBG: SGXRunScript: Write HW reg operation
  4795. [ 41.236500] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A14 Data: 0x07E80000
  4796. [ 41.236546] #PVR_DBG: SGXRunScript: Write HW reg operation
  4797. [ 41.236581] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A18 Data: 0x07EA0000
  4798. [ 41.236630] #PVR_DBG: SGXRunScript: Write HW reg operation
  4799. [ 41.236683] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A1C Data: 0x07EC0000
  4800. [ 41.236737] #PVR_DBG: SGXRunScript: Write HW reg operation
  4801. [ 41.236786] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A20 Data: 0x07EE0000
  4802. [ 41.236827] #PVR_DBG: SGXRunScript: Write HW reg operation
  4803. [ 41.236867] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A24 Data: 0x07F00000
  4804. [ 41.236917] #PVR_DBG: SGXRunScript: Write HW reg operation
  4805. [ 41.236964] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A28 Data: 0x07F20000
  4806. [ 41.237013] #PVR_DBG: SGXRunScript: Write HW reg operation
  4807. [ 41.237048] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A2C Data: 0x07F40000
  4808. [ 41.237088] #PVR_DBG: SGXRunScript: Write HW reg operation
  4809. [ 41.237123] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A30 Data: 0x07F60000
  4810. [ 41.237167] #PVR_DBG: SGXRunScript: Write HW reg operation
  4811. [ 41.237207] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A34 Data: 0x03F80000
  4812. [ 41.237246] #PVR_DBG: SGXRunScript: Write HW reg operation
  4813. [ 41.237283] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A38 Data: 0x03FA0000
  4814. [ 41.237331] #PVR_DBG: SGXRunScript: Write HW reg operation
  4815. [ 41.237367] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A3C Data: 0x03FC0000
  4816. [ 41.237404] #PVR_DBG: SGXRunScript: Write HW reg operation
  4817. [ 41.237439] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A40 Data: 0x03FE0000
  4818. [ 41.237489] #PVR_DBG: SGXRunScript: Write HW reg operation
  4819. [ 41.237526] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A48 Data: 0x0FC80000
  4820. [ 41.237567] #PVR_DBG: SGXRunScript: Write HW reg operation
  4821. [ 41.237621] #PVR_DBG: WRW: SGXREG: Reg: 0x00000B30 Data: 0x00000100
  4822. [ 41.237671] #PVR_DBG: SGXRunScript: Write HW reg operation
  4823. [ 41.237709] #PVR_DBG: WRW: SGXREG: Reg: 0x00000AC4 Data: 0xF4002010
  4824. [ 41.237753] #PVR_DBG: SGXRunScript: Write HW reg operation
  4825. [ 41.237801] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A68 Data: 0xF2016CC0
  4826. [ 41.237850] #PVR_DBG: SGXRunScript: Write HW reg operation
  4827. [ 41.237897] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A6C Data: 0x00000003
  4828. [ 41.237937] #PVR_DBG: SGXRunScript: Write HW reg operation
  4829. [ 41.237970] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A70 Data: 0x00012001
  4830. [ 41.238009] #PVR_DBG: SGXRunScript: Write HW reg operation
  4831. [ 41.238045] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A68 Data: 0xF2016D10
  4832. [ 41.238083] #PVR_DBG: SGXRunScript: Write HW reg operation
  4833. [ 41.238118] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A6C Data: 0x00000001
  4834. [ 41.238156] #PVR_DBG: SGXRunScript: Write HW reg operation
  4835. [ 41.238192] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A70 Data: 0x00012001
  4836. [ 41.238229] #PVR_DBG: SGXRunScript: Write HW reg operation
  4837. [ 41.238264] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A58 Data: 0x2200C000
  4838. [ 41.238307] #PVR_DBG: SGXRunScript: Write HW reg operation
  4839. [ 41.238343] #PVR_DBG: WRW: SGXREG: Reg: 0x00004A58 Data: 0x0804300F
  4840. [ 41.238392] #PVR_DBG: SGXRunScript: Write HW reg operation
  4841. [ 41.238444] #PVR_DBG: WRW: SGXREG: Reg: 0x00004808 Data: 0x00000004
  4842. [ 41.238490] #PVR_DBG: SGXRunScript: Write HW reg operation
  4843. [ 41.238535] #PVR_DBG: WRW: SGXREG: Reg: 0x00004144 Data: 0x000003E8
  4844. [ 41.238574] #PVR_DBG: SGXRunScript: Write HW reg operation
  4845. [ 41.238609] #PVR_DBG: WRW: SGXREG: Reg: 0x0000414C Data: 0x00000000
  4846. [ 41.238658] #PVR_DBG: SGXRunScript: Write HW reg operation
  4847. [ 41.238704] #PVR_DBG: WRW: SGXREG: Reg: 0x00008BA0 Data: 0x000005A6
  4848. [ 41.238745] #PVR_DBG: SGXRunScript: Write HW reg operation
  4849. [ 41.238779] #PVR_DBG: WRW: SGXREG: Reg: 0x00000BB4 Data: 0x00000000
  4850. [ 41.238821] #PVR_DBG: End of SGX initialisation script part 2
  4851. [ 41.238860] #PVR_DBG: Reset the SGX microkernel initialisation status
  4852. [ 41.238982] #PVR_DBG: Initialise the microkernel
  4853. [ 41.239099] #PVR_DBG: Wait for the SGX microkernel initialisation to complete
  4854. [ 41.239310] #PVR_DBG: SGXRunScript: Write HW reg operation
  4855. [ 41.239339] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A58 Data: 0x00000000
  4856. [ 41.239362] #PVR_DBG: SGXRunScript: Write HW reg operation
  4857. [ 41.239386] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A68 Data: 0x00000000
  4858. [ 41.239407] #PVR_DBG: SGXRunScript: Write HW reg operation
  4859. [ 41.239437] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A6C Data: 0x00000000
  4860. [ 41.239469] #PVR_DBG: SGXRunScript: Write HW reg operation
  4861. [ 41.239494] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A70 Data: 0x00000000
  4862. [ 41.239523] #PVR_DBG: SGXRunScript: Write HW reg operation
  4863. [ 41.239555] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A48 Data: 0x00000000
  4864. [ 41.239585] #PVR_DBG: SGXRunScript: Write HW reg operation
  4865. [ 41.239617] #PVR_DBG: WRW: SGXREG: Reg: 0x00000130 Data: 0x00000000
  4866. [ 41.239642] #PVR_DBG: SGXRunScript: Write HW reg operation
  4867. [ 41.239665] #PVR_DBG: WRW: SGXREG: Reg: 0x00000110 Data: 0x00000000
  4868. [ 41.239688] #PVR_DBG: SGXRunScript: Write HW reg operation
  4869. [ 41.239710] #PVR_DBG: WRW: SGXREG: Reg: 0x00000000 Data: 0x00000000
  4870. [ 41.239733] #PVR_DBG: SGXRunScript: Write HW reg operation
  4871. [ 41.239755] #PVR_DBG: WRW: SGXREG: Reg: 0x00000004 Data: 0x00000000
  4872. [ 41.239777] #PVR_DBG: SGXRunScript: Write HW reg operation
  4873. [ 41.239800] #PVR_DBG: WRW: SGXREG: Reg: 0x00004004 Data: 0x00000000
  4874. [ 41.239831] #PVR_DBG: SGXRunScript: Write HW reg operation
  4875. [ 41.239865] #PVR_DBG: WRW: SGXREG: Reg: 0x00004020 Data: 0x00000000
  4876. [ 41.239890] #PVR_DBG: SGXRunScript: Write HW reg operation
  4877. [ 41.239913] #PVR_DBG: WRW: SGXREG: Reg: 0x00004000 Data: 0x00000000
  4878. [ 41.239984] #PVR_DBG: Microkernel kick for SGXGetMiscInfo
  4879. [ 41.240273] #PVR_DBG: SGX initialisation script part 1
  4880. [ 41.240304] #PVR_DBG: SGXRunScript: Write HW reg operation
  4881. [ 41.240340] #PVR_DBG: WRW: SGXREG: Reg: 0x00004000 Data: 0x00000000
  4882. [ 41.240375] #PVR_DBG: SGXRunScript: Read HW reg operation
  4883. [ 41.240410] #PVR_DBG: RDW: SGXREG: Reg: 0x00004000
  4884. [ 41.240438] #PVR_DBG: SGXRunScript: Write HW reg operation
  4885. [ 41.240469] #PVR_DBG: WRW: SGXREG: Reg: 0x00004020 Data: 0x000002AA
  4886. [ 41.240500] #PVR_DBG: SGXRunScript: Read HW reg operation
  4887. [ 41.240532] #PVR_DBG: RDW: SGXREG: Reg: 0x00004020
  4888. [ 41.240562] #PVR_DBG: SGXRunScript: Write HW reg operation
  4889. [ 41.240595] #PVR_DBG: WRW: SGXREG: Reg: 0x00004004 Data: 0x00000002
  4890. [ 41.240626] #PVR_DBG: End of SGX initialisation script part 1
  4891. [ 41.240682] #PVR_DBG: SGX initialisation script part 2
  4892. [ 41.240707] #PVR_DBG: SGXRunScript: Write HW reg operation
  4893. [ 41.240738] #PVR_DBG: WRW: SGXREG: Reg: 0x00000130 Data: 0x00004000
  4894. [ 41.240768] #PVR_DBG: SGXRunScript: Write HW reg operation
  4895. [ 41.240801] #PVR_DBG: WRW: SGXREG: Reg: 0x00000110 Data: 0x00000000
  4896. [ 41.240833] #PVR_DBG: SGXRunScript: Write HW reg operation
  4897. [ 41.240856] #PVR_DBG: WRW: SGXREG: Reg: 0x0000013C Data: 0x00000000
  4898. [ 41.240879] #PVR_DBG: SGXRunScript: Write HW reg operation
  4899. [ 41.240902] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A7C Data: 0x00000000
  4900. [ 41.240926] #PVR_DBG: SGXRunScript: Write HW reg operation
  4901. [ 41.240952] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A80 Data: 0x00000000
  4902. [ 41.240984] #PVR_DBG: SGXRunScript: Write HW reg operation
  4903. [ 41.241016] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A74 Data: 0x00208200
  4904. [ 41.241045] #PVR_DBG: SGXRunScript: Write HW reg operation
  4905. [ 41.241072] #PVR_DBG: WRW: SGXREG: Reg: 0x00000ABC Data: 0x00000040
  4906. [ 41.241100] #PVR_DBG: SGXRunScript: Write HW reg operation
  4907. [ 41.241136] #PVR_DBG: WRW: SGXREG: Reg: 0x00000AB8 Data: 0x00000001
  4908. [ 41.241166] #PVR_DBG: SGXRunScript: Write HW reg operation
  4909. [ 41.241192] #PVR_DBG: WRW: SGXREG: Reg: 0x00000800 Data: 0x00000010
  4910. [ 41.241214] #PVR_DBG: SGXRunScript: Write HW reg operation
  4911. [ 41.241244] #PVR_DBG: WRW: SGXREG: Reg: 0x00000818 Data: 0x00000000
  4912. [ 41.241274] #PVR_DBG: SGXRunScript: Write HW reg operation
  4913. [ 41.241305] #PVR_DBG: WRW: SGXREG: Reg: 0x00000804 Data: 0x00000C00
  4914. [ 41.241340] #PVR_DBG: SGXRunScript: Write HW reg operation
  4915. [ 41.241369] #PVR_DBG: WRW: SGXREG: Reg: 0x00000814 Data: 0x0000FFFF
  4916. [ 41.241396] #PVR_DBG: SGXRunScript: Write HW reg operation
  4917. [ 41.241433] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A00 Data: 0x0007C000
  4918. [ 41.241464] #PVR_DBG: SGXRunScript: Write HW reg operation
  4919. [ 41.241495] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A0C Data: 0x07E40000
  4920. [ 41.241518] #PVR_DBG: SGXRunScript: Write HW reg operation
  4921. [ 41.241548] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A10 Data: 0x07E60000
  4922. [ 41.241577] #PVR_DBG: SGXRunScript: Write HW reg operation
  4923. [ 41.241608] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A14 Data: 0x07E80000
  4924. [ 41.241638] #PVR_DBG: SGXRunScript: Write HW reg operation
  4925. [ 41.241670] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A18 Data: 0x07EA0000
  4926. [ 41.241695] #PVR_DBG: SGXRunScript: Write HW reg operation
  4927. [ 41.241719] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A1C Data: 0x07EC0000
  4928. [ 41.241743] #PVR_DBG: SGXRunScript: Write HW reg operation
  4929. [ 41.241768] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A20 Data: 0x07EE0000
  4930. [ 41.241794] #PVR_DBG: SGXRunScript: Write HW reg operation
  4931. [ 41.241823] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A24 Data: 0x07F00000
  4932. [ 41.241852] #PVR_DBG: SGXRunScript: Write HW reg operation
  4933. [ 41.241879] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A28 Data: 0x07F20000
  4934. [ 41.241902] #PVR_DBG: SGXRunScript: Write HW reg operation
  4935. [ 41.241925] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A2C Data: 0x07F40000
  4936. [ 41.241948] #PVR_DBG: SGXRunScript: Write HW reg operation
  4937. [ 41.241971] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A30 Data: 0x07F60000
  4938. [ 41.241994] #PVR_DBG: SGXRunScript: Write HW reg operation
  4939. [ 41.242017] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A34 Data: 0x03F80000
  4940. [ 41.242039] #PVR_DBG: SGXRunScript: Write HW reg operation
  4941. [ 41.242062] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A38 Data: 0x03FA0000
  4942. [ 41.242085] #PVR_DBG: SGXRunScript: Write HW reg operation
  4943. [ 41.242115] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A3C Data: 0x03FC0000
  4944. [ 41.242141] #PVR_DBG: SGXRunScript: Write HW reg operation
  4945. [ 41.242164] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A40 Data: 0x03FE0000
  4946. [ 41.242192] #PVR_DBG: SGXRunScript: Write HW reg operation
  4947. [ 41.242218] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A48 Data: 0x0FC80000
  4948. [ 41.242240] #PVR_DBG: SGXRunScript: Write HW reg operation
  4949. [ 41.242264] #PVR_DBG: WRW: SGXREG: Reg: 0x00000B30 Data: 0x00000100
  4950. [ 41.242287] #PVR_DBG: SGXRunScript: Write HW reg operation
  4951. [ 41.242321] #PVR_DBG: WRW: SGXREG: Reg: 0x00000AC4 Data: 0xF4002010
  4952. [ 41.242348] #PVR_DBG: SGXRunScript: Write HW reg operation
  4953. [ 41.242371] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A68 Data: 0xF2016CC0
  4954. [ 41.242393] #PVR_DBG: SGXRunScript: Write HW reg operation
  4955. [ 41.242416] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A6C Data: 0x00000003
  4956. [ 41.242447] #PVR_DBG: SGXRunScript: Write HW reg operation
  4957. [ 41.242473] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A70 Data: 0x00012001
  4958. [ 41.242501] #PVR_DBG: SGXRunScript: Write HW reg operation
  4959. [ 41.242528] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A68 Data: 0xF2016D10
  4960. [ 41.242551] #PVR_DBG: SGXRunScript: Write HW reg operation
  4961. [ 41.242579] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A6C Data: 0x00000001
  4962. [ 41.242605] #PVR_DBG: SGXRunScript: Write HW reg operation
  4963. [ 41.242635] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A70 Data: 0x00012001
  4964. [ 41.242663] #PVR_DBG: SGXRunScript: Write HW reg operation
  4965. [ 41.242689] #PVR_DBG: WRW: SGXREG: Reg: 0x00008A58 Data: 0x2200C000
  4966. [ 41.242712] #PVR_DBG: SGXRunScript: Write HW reg operation
  4967. [ 41.242736] #PVR_DBG: WRW: SGXREG: Reg: 0x00004A58 Data: 0x0804300F
  4968. [ 41.242764] #PVR_DBG: SGXRunScript: Write HW reg operation
  4969. [ 41.242789] #PVR_DBG: WRW: SGXREG: Reg: 0x00004808 Data: 0x00000004
  4970. [ 41.242811] #PVR_DBG: SGXRunScript: Write HW reg operation
  4971. [ 41.242835] #PVR_DBG: WRW: SGXREG: Reg: 0x00004144 Data: 0x000003E8
  4972. [ 41.242858] #PVR_DBG: SGXRunScript: Write HW reg operation
  4973. [ 41.242888] #PVR_DBG: WRW: SGXREG: Reg: 0x0000414C Data: 0x00000000
  4974. [ 41.242912] #PVR_DBG: SGXRunScript: Write HW reg operation
  4975. [ 41.242942] #PVR_DBG: WRW: SGXREG: Reg: 0x00008BA0 Data: 0x000005A6
  4976. [ 41.242970] #PVR_DBG: SGXRunScript: Write HW reg operation
  4977. [ 41.243003] #PVR_DBG: WRW: SGXREG: Reg: 0x00000BB4 Data: 0x00000000
  4978. [ 41.243033] #PVR_DBG: End of SGX initialisation script part 2
  4979. [ 41.243063] #PVR_DBG: Reset the SGX microkernel initialisation status
  4980. [ 41.243095] #PVR_DBG: Initialise the microkernel
  4981. [ 41.243179] #PVR_DBG: Wait for the SGX microkernel initialisation to complete
  4982. [ 41.250001] PVR_K:(Error): PVRSRVOpenDCDeviceKM: Failed to open external DC device
  4983. [ 41.339420] wl_android_wifi_on in 1
  4984. [ 41.339449] wl_android_wifi_on in 2: g_wifi_on=0
  4985. [ 41.339470] wifi_platform_set_power = 1
  4986. [ 41.339493] ======== PULL WL_REG_ON HIGH! ========
  4987. [ 41.339515] [wifi_pm]: wifi power on
  4988. [ 41.640176] sdio_reset_comm():
  4989. [ 41.640220] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  4990. [ 41.642624] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  4991. [ 41.643862] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B
  4992. [ 41.644682] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing LEGACY(SDR12) dt B
  4993. [ 41.658570] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  4994. [ 41.660838] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  4995. [ 41.663129] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  4996. [ 41.667208] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  4997. [ 41.796313] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  4998. [ 41.796604] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  4999. [ 41.797026] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  5000.  
  5001.  
  5002. [ 41.798306] dhd_bus_devreset: == WLAN ON ==
  5003. [ 41.798558] F1 signature read @0x18000000=0x1540a9a6
  5004. [ 41.804671] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
  5005. [ 41.806931] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  5006. [ 41.807616] dhdsdio_probe_init: set use_rxchain 1 from config.txt
  5007. [ 41.808230] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
  5008. [ 41.808259] Final fw_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
  5009. [ 41.808278] Final nv_path=/lib/firmware/ap6212/nvram.txt
  5010. [ 41.808296] Final conf_path=/lib/firmware/ap6212/config.txt
  5011. [ 41.907857] NVRAM version: AP6212_NVRAM_V1.0_20140603
  5012. [ 41.909416] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  5013. [ 41.968667] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  5014. [ 41.968972] bcmsdh_oob_intr_register: Enter
  5015. [ 41.968992] bcmsdh_oob_intr_register: HW_OOB enabled
  5016. [ 41.969019] bcmsdh_oob_intr_register OOB irq=3 flags=414
  5017. [ 41.969277] bcmsdh_oob_intr_register: enable_irq_wake
  5018. [ 41.969304] bcmsdh_oob_intr_register: enable_irq_wake failed with -6
  5019. [ 41.972945] dhd_conf_set_band: Set band 0
  5020. [ 41.989128] Firmware up: op_mode=0x0001, MAC=e0:76:d0:2d:df:63
  5021. [ 41.989163] dhd_conf_set_country: Set country CN, revision 0
  5022. [ 42.054270] Country code: CN (CN/0)
  5023. [ 42.055293] dhd_conf_set_roam: Set roam_off 1
  5024. [ 42.267946] Firmware version = wl0: Jul 18 2014 18:24:48 version 7.10.226.54.x2 (A0 Station) FWID 01-2faae407
  5025. [ 42.267988] Driver: 1.201.59.3 (r506368)
  5026. [ 42.267999] Firmware: wl0: Jul 18 2014 18:24:48 version 7.10.226.54.x2 (A0 Station) FWID 01-2faae407
  5027. [ 42.268575] dhd_txglom_enable: enable 1
  5028. [ 42.268594] dhd_conf_set_disable_proptx: set disable_proptx 0
  5029. [ 42.271350] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
  5030. [ 42.272089] wl_android_wifi_on: Success
  5031. [ 42.350444] dhd_open: Exit ret=0
  5032. [ 48.294988] calling hci_uart_init+0x0/0xf4 [hci_uart] @ 2166
  5033. [ 48.301554] Bluetooth: HCI UART driver ver 2.2
  5034. [ 48.306571] Bluetooth: HCI H4 protocol initialized
  5035. [ 48.312104] Bluetooth: HCI BCSP protocol initialized
  5036. [ 48.317690] Bluetooth: HCILL protocol initialized
  5037. [ 48.323108] Bluetooth: HCI Realtek H5 protocol initialized
  5038. [ 48.329355] initcall hci_uart_init+0x0/0xf4 [hci_uart] returned 0 after 27096 usecs
  5039. pi@bpi-iot-ros-ai:~$ sudo poweroff
  5040. [sudo] password for pi:
  5041. Stopping Disk Manager...
  5042. Starting Unattended Upgrades Shutdown...
  5043. [ OK ] Stopped Stop ureadahead data collection 45s after completed startup.
  5044. Stopping User Manager for UID 1000...
  5045. [ OK ] Stopped target Sound Card.
  5046. Stopping Session c1 of user pi.
  5047. [ OK ] Stopped target Bluetooth.
  5048. [ OK ] Stopped target Timers.
  5049. [ OK ] Stopped Daily apt activities.
  5050. Stopping Session c2 of user pi.
  5051. [ OK ] Stopped Daily Cleanup of Temporary Directories.
  5052. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
  5053. Stopping Hostname Service...
  5054. Stopping Daemon for power management...
  5055. [ OK ] Stopped target Graphical Interface.
  5056. Stopping Accounts Service...
  5057. Stopping Light Display Manager...
  5058. Stopping RealtimeKit Scheduling Policy Service...
  5059. Stopping Save/Restore Sound Card State...
  5060. Stopping TLP system startup/shutdown...
  5061. Stopping Authenticate and Authorize Users to Run Privileged Tasks...
  5062. [ OK ] Unmounted /run/user/1000/gvfs.
  5063. [ OK ] Stopped Accounts Service.
  5064. [ OK ] Stopped Hostname Service.
  5065. [ OK ] Stopped Light Display Manager.
  5066. [ OK ] Stopped Authenticate and Authorize Users to Run Privileged Tasks.
  5067. [ OK ] Stopped Serial Getty on ttyS0.
  5068. [ OK ] Stopped RealtimeKit Scheduling Policy Service.
  5069. [ OK ] Stopped User Manager for UID 1000.
  5070. [ OK ] Stopped Disk Manager.
  5071. [ OK ] Stopped Daemon for power management.
  5072. [ OK ] Started Unattended Upgrades Shutdown.
  5073. [ OK ] Stopped Save/Restore Sound Card State.
  5074. [ OK ] Stopped Session c2 of user pi.
  5075. [ 84.216532] ADDRCONF(NETDEV_UP): eth0: link is not ready
  5076. [ OK ] Stopped TLP system startup/shutdown.
  5077. [ OK ] Stopped Session c1 of user pi.
  5078. [ OK ] Stopped target Multi-User System.
  5079. Stopping LSB: Speech Dispatcher...
  5080. Stopping LSB: Banana Pi init script...
  5081. Stopping Make remote CUPS printers available locally...
  5082. Stopping LSB: daemon to balance interrupts for SMP systems...
  5083. Stopping LSB: Start NTP daemon...
  5084. Stopping System Logging Service...
  5085. Stopping OpenBSD Secure Shell server...
  5086. [ OK ] Stopped Timer to automatically refresh installed snaps.
  5087. [ OK ] Stopped target System Time Synchronized.
  5088. Stopping crash report submission daemon...
  5089. Stopping Regular background program processing daemon...
  5090. Stopping Snappy daemon...
  5091. Stopping LSB: Set the CPU Frequency Scaling governor to "ondemand"...
  5092. Stopping LSB: disk temperature monitoring daemon...
  5093. Stopping Avahi DNS Configuration Daemon...
  5094. Stopping LSB: automatic crash report generation...
  5095. Stopping Modem Manager...
  5096. Stopping Bluetooth service...
  5097. [ OK ] Removed slice User Slice of pi.
  5098. Stopping Login Service...
  5099. [ OK ] Stopped target Login Prompts.
  5100. Stopping Getty on tty1...
  5101. [ OK ] Removed slice system-serial\x2dgetty.slice.
  5102. [ OK ] Stopped crash report submission daemon.
  5103. [ OK ] Stopped Modem Manager.
  5104. [ OK ] Stopped System Logging Service.
  5105. [ OK ] Stopped Bluetooth service.
  5106. [ OK ] Stopped Login Service.
  5107. [ OK ] Stopped Make remote CUPS printers available locally.
  5108. [ OK ] Stopped Avahi DNS Configuration Daemon.
  5109. [ OK ] Stopped Regular background program processing daemon.
  5110. [ OK ] Stopped Snappy daemon.
  5111. [ OK ] Stopped OpenBSD Secure Shell server.
  5112. [ OK ] Stopped Getty on tty1.
  5113. [ OK ] Stopped LSB: Speech Dispatcher.
  5114. [ OK ] Stopped LSB: Banana Pi init script.
  5115. [ OK ] Stopped LSB: daemon to balance interrupts for SMP systems.
  5116. [ OK ] Stopped LSB: Set the CPU Frequency Scaling governor to "ondemand".
  5117. [ OK ] Stopped LSB: Start NTP daemon.
  5118. [ OK ] Stopped LSB: disk temperature monitoring daemon.
  5119. [ OK ] Stopped LSB: automatic crash report generation.
  5120. [ OK ] Stopped /etc/rc.local Compatibility.
  5121. [ OK ] Stopped target Network is Online.
  5122. [ OK ] Stopped Network Manager Wait Online.
  5123. [ OK ] Removed slice system-getty.slice.
  5124. Stopping Permit User Sessions...
  5125. [ OK ] Stopped target Network.
  5126. Stopping Raise network interfaces...
  5127. Stopping Network Manager...
  5128. Stopping WPA supplicant...
  5129. [ 92.255910] dhd_stop: Enter ee0dd800
  5130. [ 92.265772] wl_android_wifi_off in 1
  5131. [ 92.269814] wl_android_wifi_off in 2: g_wifi_on=1
  5132. [ 92.276717] bcmsdh_oob_intr_unregister: Enter
  5133. [ 92.281830] dhd_txglom_enable: enable 0
  5134. [ 92.286157] dhd_bus_devreset: WLAN OFF DONE
  5135. [ 92.291140] wifi_platform_set_power = 0
  5136. [ 92.295550] ======== PULL WL_REG_ON LOW! ========
  5137. [ 92.301018] [wifi_pm]: wifi power off
  5138. [ 92.305245] wl_android_wifi_off out
  5139. [ 92.309244] dhd_stop: Exit
  5140. [ 92.318302] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  5141. [ OK ] Stopped SSH key generation on first startup.
  5142. Stopping Avahi mDNS/DNS-SD Stack...
  5143. Stopping CUPS Scheduler...
  5144. [ OK ] Stopped WPA supplicant.
  5145. [ OK ] Stopped CUPS Scheduler.
  5146. [ OK ] Stopped Avahi mDNS/DNS-SD Stack.
  5147. [ OK ] Stopped Network Manager.
  5148. [ OK ] Stopped Permit User Sessions.
  5149. [ OK ] Stopped target User and Group Name Lookups.
  5150. [ OK ] Stopped target Remote File Systems.
  5151. [ OK ] Stopped target Remote File Systems (Pre).
  5152. Stopping D-Bus System Message Bus...
  5153. [ OK ] Stopped D-Bus System Message Bus.
  5154. [ OK ] Stopped target Basic System.
  5155. [ OK ] Stopped target Paths.
  5156. [ OK ] Stopped Trigger resolvconf update for networkd DNS.
  5157. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
  5158. [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
  5159. [ OK ] Stopped CUPS Scheduler.
  5160. [ OK ] Stopped target Slices.
  5161. [ OK ] Removed slice User and Session Slice.
  5162. [ OK ] Stopped target Sockets.
  5163. [ OK ] Closed UUID daemon activation socket.
  5164. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
  5165. [ OK ] Closed Syslog Socket.
  5166. [ OK ] Closed Socket activation for snappy daemon.
  5167. [ OK ] Closed CUPS Scheduler.
  5168. [ OK ] Closed D-Bus System Message Bus Socket.
  5169. [ OK ] Stopped target System Initialization.
  5170. Stopping Restore / save the current clock...
  5171. Stopping Load/Save Random Seed...
  5172. Stopping Update UTMP about System Boot/Shutdown...
  5173. [ OK ] Stopped target Swap.
  5174. [ OK ] Stopped target Encrypted Volumes.
  5175. [ OK ] Stopped Restore / save the current clock.
  5176. [ OK ] Stopped Load/Save Random Seed.
  5177. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  5178. [ OK ] Stopped Raise network interfaces.
  5179. [ OK ] Stopped Apply Kernel Variables.
  5180. [ OK ] Stopped Load Kernel Modules.
  5181. [ OK ] Stopped Create Volatile Files and Directories.
  5182. [ OK ] Stopped target Local File Systems.
  5183. Unmounting /boot...
  5184. Unmounting /run/user/1000...
  5185. [ OK ] Unmounted /boot.
  5186. [ OK ] Stopped File System Check on /dev/mmcblk0p1.
  5187. [ OK ] Removed slice system-systemd\x2dfsck.slice.
  5188. [ OK ] Unmounted /run/user/1000.
  5189. [ OK ] Reached target Unmount All Filesystems.
  5190. [ OK ] Stopped target Local File Systems (Pre).
  5191. [ OK ] Stopped Remount Root and Kernel File Systems.
  5192. [ OK ] Stopped Create Static Device Nodes in /dev.
  5193. [ OK ] Reached target Shutdown.
  5194. [ 103.112844] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
  5195. [ 103.165287] systemd-journald[191]: Received SIGTERM from PID 1 (systemd-shutdow).
  5196. [ 103.627100] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
  5197. [ 104.070569] systemd-shutdown[1]: Unmounting file systems.
  5198. [ 104.078388] systemd-shutdown[1]: Remounting '/' read-only with options 'stripe=1024'.
  5199. [ 104.259353] EXT4-fs (mmcblk0p2): re-mounted. Opts: stripe=1024
  5200. [ 104.298270] systemd-shutdown[1]: Remounting '/' read-only with options 'stripe=1024'.
  5201. [ 104.307382] EXT4-fs (mmcblk0p2): re-mounted. Opts: stripe=1024
  5202. [ 104.314081] systemd-shutdown[1]: All filesystems unmounted.
  5203. [ 104.320432] systemd-shutdown[1]: Deactivating swaps.
  5204. [ 104.326342] systemd-shutdown[1]: All swaps deactivated.
  5205. [ 104.332319] systemd-shutdown[1]: Detaching loop devices.
  5206. [ 104.353892] systemd-shutdown[1]: All loop devices detached.
  5207. [ 104.360280] systemd-shutdown[1]: Detaching DM devices.
  5208. [ 104.366888] systemd-shutdown[1]: All DM devices detached.
  5209. [ 104.387913] systemd-shutdown[1]: Powering off.
  5210. [ 104.393041] drivers/cpufreq/autohotplug.c:reboot_notifier_call: stop autoplug begin
  5211. [ 104.401722] drivers/cpufreq/autohotplug.c:reboot_notifier_call: stop autoplug done
  5212. [ 104.410301] drivers/cpufreq/cpufreq.c:reboot_notifier_call: stop none boot cpus
  5213. [ 104.654347] CPU1: shutdown
  5214. [ 104.835012] CPU2: shutdown
  5215. [ 105.014214] CPU3: shutdown
  5216. [ 105.141401] CPU4: shutdown
  5217. [ 105.361364] CPU5: shutdown
  5218. [ 105.521315] CPU6: shutdown
  5219. [ 105.611189] CPU7: shutdown
  5220. [ 105.617098] drivers/cpufreq/cpufreq.c:reboot_notifier_call: stop none boot cpus done
  5221. [ 105.626304] #PVR_DBG: SGXRunScript: Write HW reg operation
  5222. [ 105.632520] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A58 Data: 0x00000000
  5223. [ 105.639568] #PVR_DBG: SGXRunScript: Write HW reg operation
  5224. [ 105.645753] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A68 Data: 0x00000000
  5225. [ 105.652825] #PVR_DBG: SGXRunScript: Write HW reg operation
  5226. [ 105.658908] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A6C Data: 0x00000000
  5227. [ 105.666008] #PVR_DBG: SGXRunScript: Write HW reg operation
  5228. [ 105.672111] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A70 Data: 0x00000000
  5229. [ 105.679165] #PVR_DBG: SGXRunScript: Write HW reg operation
  5230. [ 105.685263] #PVR_DBG: WRW: SGXREG: Reg: 0x00000A48 Data: 0x00000000
  5231. [ 105.692382] #PVR_DBG: SGXRunScript: Write HW reg operation
  5232. [ 105.698472] #PVR_DBG: WRW: SGXREG: Reg: 0x00000130 Data: 0x00000000
  5233. [ 105.705532] #PVR_DBG: SGXRunScript: Write HW reg operation
  5234. [ 105.711888] #PVR_DBG: WRW: SGXREG: Reg: 0x00000110 Data: 0x00000000
  5235. [ 105.718937] #PVR_DBG: SGXRunScript: Write HW reg operation
  5236. [ 105.725040] #PVR_DBG: WRW: SGXREG: Reg: 0x00000000 Data: 0x00000000
  5237. [ 105.732110] #PVR_DBG: SGXRunScript: Write HW reg operation
  5238. [ 105.738193] #PVR_DBG: WRW: SGXREG: Reg: 0x00000004 Data: 0x00000000
  5239. [ 105.745298] #PVR_DBG: SGXRunScript: Write HW reg operation
  5240. [ 105.751400] #PVR_DBG: WRW: SGXREG: Reg: 0x00004004 Data: 0x00000000
  5241. [ 105.758448] #PVR_DBG: SGXRunScript: Write HW reg operation
  5242. [ 105.764579] #PVR_DBG: WRW: SGXREG: Reg: 0x00004020 Data: 0x00000000
  5243. [ 105.771675] #PVR_DBG: SGXRunScript: Write HW reg operation
  5244. [ 105.777807] #PVR_DBG: WRW: SGXREG: Reg: 0x00004000 Data: 0x00000000
  5245. [ 105.784945] PVR_K:(Error): Failed to pull down gpu hyd clock reset!
  5246. [ 105.792312] [mmc]: shutdown_mmc: is not card 2, return
  5247. [ 105.798019] [mmc]: shutdown_mmc: mmc 1 shutdown exit..ok
  5248. [ 105.803928] [mmc]: try to disable cache
  5249. [ 105.808229] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing LEGACY(SDR12) dt B
  5250. [ 105.818658] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  5251. [ 105.829042] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  5252. [ 105.839310] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  5253. [ 105.851949] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  5254. [ 105.880345] [mmc]: shutdown_mmc: mmc 2 shutdown exit..ok
  5255. [ 105.886236] [mmc]: shutdown_mmc: is not card 2, return
  5256. [ 105.891945] [mmc]: shutdown_mmc: mmc 0 shutdown exit..ok
  5257. [ 105.900095] [alarmtimer] have no shutdown alarm! alarmtimer_shutdown 331
  5258. [ 106.128673] Disabling non-boot CPUs ...
  5259. [ 106.132949] Power down.
  5260. [ 106.135709] [axp] send power-off command!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!