Armbian Debian Stetch 27-APR serial first boot to poweroff

U-Boot SPL 2018.03-rc1-armbian (Apr 26 2018 - 20:35:23 +0200)
DRAM: 4096 MiB, 3072 MiB usable
Trying to boot from MMC1
INFO:    PSCI: Powering off cluster 0 core 1
INFO:    PSCI: Disabling power to cluster 0 core 1
INFO:    PSCI: Powering off cluster 0 core 2
INFO:    PSCI: Disabling power to cluster 0 core 2
INFO:    PSCI: Powering off cluster 0 core 3
INFO:    PSCI: Disabling power to cluster 0 core 3
NOTICE:  BL31: v1.4(debug):c591d63
NOTICE:  BL31: Built : 20:35:18, Apr 26 2018
INFO:    ARM GICv2 driver initialized
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: errata workaround for 835769 was applied
INFO:    BL31: cortex_a53: errata workaround for 843419 was applied
INFO:    BL31: cortex_a53: errata workaround for 855873 was applied
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9


U-Boot 2018.03-rc1-armbian (Apr 26 2018 - 20:35:23 +0200) Allwinner Technology

CPU:   Allwinner H6 (SUN50I)
Model: Pine H64
DRAM:  3 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
Loading Environment from FAT... Card did not respond to voltage select!
mmc_init: -95, time 25
** Bad device mmc 1 **
Failed (-5)
In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  1  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3100 bytes read in 194 ms (14.6 KiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
116 bytes read in 163 ms (0 Bytes/s)
14320 bytes read in 385 ms (36.1 KiB/s)
** File not found /boot/dtb/allwinner/overlay/sun50i-h6-fixup.scr **
4558258 bytes read in 745 ms (5.8 MiB/s)
13262856 bytes read in 1616 ms (7.8 MiB/s)
## Loading init Ramdisk from Legacy Image at 4fe00000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4558194 Bytes = 4.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Ramdisk to 49ba7000, end 49fffd72 ... OK
   reserving fdt memory region: addr=4fa00000 size=69000
   Loading Device Tree to 0000000049b3b000, end 0000000049ba6fff ... OK

Starting kernel ...

Loading, please wait...
starting version 232
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
/dev/mmcblk0p1: clean, 36410/80960 files, 257621/323584 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.

Welcome to Debian GNU/Linux 9 (stretch)!

[  OK  ] Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on Journal Socket.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Created slice System Slice.
         Starting Load Kernel Modules...
         Starting Restore / save the current clock...
         Starting Set the console keyboard layout...
         Mounting Huge Pages File System...
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Mounting Debug File System...
         Mounting POSIX Message Queue File System...
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target Swap.
         Starting Create list of required st…ce nodes for the current kernel...
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Syslog Socket.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Reached target Slices.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Set up automount Arbitrary Executab…rmats File System Automount Point.
         Starting Nameserver information manager...
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
         Starting Create Static Device Nodes in /dev...
         Starting Apply Kernel Variables...
         Mounting Configuration File System...
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting udev Coldplug all Devices...
         Starting Load/Save Random Seed...
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Nameserver information manager.
[  OK  ] Started Restore / save the current clock.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Set the console keyboard layout.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
[  OK  ] Mounted /tmp.
[  OK  ] Reached target Local File Systems.
         Starting Armbian enhanced Log2Ram...
         Starting Set console font and keymap...
         Starting Raise network interfaces...
[  OK  ] Started Set console font and keymap.
[  OK  ] Started Armbian enhanced Log2Ram.
         Starting Journal Service...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started udev Kernel Device Manager.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Entropy daemon using the HAVEGE algorithm.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
         Starting Armbian filesystem resize service...
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started Raise network interfaces.
[*     ] A start job is running for Armbian …stem resize service (8s / 5min 3s)[**    ] A start job is running for Armbian …stem resize service (9s / 5min 3s)[***   ] A start job is running for Armbian …tem resize service (10s / 5min 3s)[ ***  ] A start job is running for Armbian …tem resize service (10s / 5min 3s)[  *** ] A start job is running for Armbian …tem resize service (11s / 5min 3s)[   ***] A start job is running for Armbian …tem resize service (11s / 5min 3s)[    **] A start job is running for Armbian …tem resize service (12s / 5min 3s)[     *] A start job is running for Armbian …tem resize service (13s / 5min 3s)[    **] A start job is running for Armbian …tem resize service (13s / 5min 3s)[  OK  ] Started Armbian filesystem resize service.
[  OK  ] Reached target Basic System.
         Starting LSB: Start/stop sysstat's sadc...
[  OK  ] Started D-Bus System Message Bus.
         Starting Login Service...
         Starting LSB: Load kernel modules needed to enable cpufreq scaling...
         Starting LSB: Armbian gathering hardware information...
         Starting Network Manager...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started Armbian first run tasks.
[  OK  ] Created slice system-getty.slice.
         Starting System Logging Service...
[  OK  ] Started LSB: Start/stop sysstat's sadc.
[  OK  ] Started Login Service.
[  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
         Starting LSB: set CPUFreq kernel parameters...
[  OK  ] Started LSB: set CPUFreq kernel parameters.
         Starting LSB: Set sysfs variables from /etc/sysfs.conf...
[  OK  ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
[  OK  ] Started System Logging Service.
[   ***] (2 of 2) A start job is running for Network Manager (21s / 1min 45s)[  *** ] (2 of 2) A start job is running for Network Manager (22s / 1min 45s)[  OK  ] Started LSB: Armbian gathering hardware information.
[  OK  ] Started Network Manager.
         Starting Network Manager Wait Online...
[  OK  ] Reached target Network.
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
[  OK  ] Started Unattended Upgrades Shutdown.
         Starting Network Manager Script Dispatcher Service...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Network Manager Script Dispatcher Service.
         Starting Hostname Service...
[  OK  ] Started Hostname Service.
[  OK  ] Started OpenBSD Secure Shell server.
         Starting Authorization Manager...
[  OK  ] Started Authorization Manager.
[  OK  ] Started Network Manager Wait Online.
[  OK  ] Reached target Network is Online.
         Starting LSB: Advanced IEEE 802.11 management daemon...
         Starting /etc/rc.local Compatibility...
         Starting LSB: Start NTP daemon...
         Starting LSB: disk temperature monitoring daemon...
[  OK  ] Started LSB: Advanced IEEE 802.11 management daemon.
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started LSB: disk temperature monitoring daemon.
[  OK  ] Started LSB: Start NTP daemon.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux 9 pineh64 ttyS0

pineh64 login: root
Password:
You are required to change your password immediately (root enforced)
Changing password for root.
(current) UNIX password:
Enter new UNIX password:
Retype new UNIX password:
 ____  _              _   _  __   _  _
|  _ \(_)_ __   ___  | | | |/ /_ | || |
| |_) | | '_ \ / _ \ | |_| | '_ \| || |_
|  __/| | | | |  __/ |  _  | (_) |__   _|
|_|   |_|_| |_|\___| |_| |_|\___/   |_|


Welcome to ARMBIAN 5.43.180426 nightly Debian GNU/Linux 9 (stretch) 4.17.0-rc2-sunxi64
System load:   0.79 0.34 0.13  	Up time:       1 min
Memory usage:  2 % of 3010MB 	IP:            192.168.0.130
Usage of /:    4% of 30G

[ General system configuration (beta): armbian-config ]

New to Armbian? Check the documentation first: https://docs.armbian.com


You are using an Armbian nightly build meant only for developers to provide
constructive feedback to improve build system, OS settings or user experience.
If this does not apply to you, STOP NOW!. Especially don't use this image for
daily work since things might not work as expected or at all and may break
anytime with next update. YOU HAVE BEEN WARNED!

This image is provided AS IS with NO WARRANTY and NO END USER SUPPORT!.

Creating a new user account. Press <Ctrl-C> to abort

Please provide a username (eg. your forename): pfeerick
Trying to add user pfeerick
Adding user `pfeerick' ...
Adding new group `pfeerick' (1000) ...
Adding new user `pfeerick' (1000) with group `pfeerick' ...
Creating home directory `/home/pfeerick' ...
Copying files from `/etc/skel' ...
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
Changing the user information for pfeerick
Enter the new value, or press ENTER for the default
	Full Name []: Peter
	Room Number []:
	Work Phone []:
	Home Phone []:
	Other []:
Is the information correct? [Y/n]

Dear Peter, your account pfeerick has been created and is sudo enabled.
Please use this account for your daily work from now on.

root@pineh64:~# logout

Debian GNU/Linux 9 pineh64 ttyS0

pineh64 login: pfeerick
Password:
 ____  _              _   _  __   _  _
|  _ \(_)_ __   ___  | | | |/ /_ | || |
| |_) | | '_ \ / _ \ | |_| | '_ \| || |_
|  __/| | | | |  __/ |  _  | (_) |__   _|
|_|   |_|_| |_|\___| |_| |_|\___/   |_|


Welcome to ARMBIAN 5.43.180426 nightly Debian GNU/Linux 9 (stretch) 4.17.0-rc2-sunxi64
System load:   0.31 0.28 0.12  	Up time:       2 min
Memory usage:  2 % of 3010MB 	IP:            192.168.0.130
Usage of /:    4% of 30G


pfeerick@pineh64:~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether d6:a7:66:27:d3:c1 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.130/24 brd 192.168.0.255 scope global dynamic eth0
       valid_lft 86292sec preferred_lft 86292sec
    inet6 fe80::44e0:fbf7:9598:31ee/64 scope link
       valid_lft forever preferred_lft forever
pfeerick@pineh64:~$ sudo poweroff
[sudo] password for pfeerick:
               Stopping Session 5 of user pfeerick.
[  OK  ] Stopped target Graphical Interface.
         Stopping User Manager for UID 1000...
[  OK  ] Stopped Daily Cleanup of Temporary Directories.
[  OK  ] Stopped Daily apt upgrade and clean activities.
[  OK  ] Stopped Daily apt download activities.
[  OK  ] Stopped target System Time Synchronized.
         Stopping Authorization Manager...
[  OK  ] Stopped target Multi-User System.
         Stopping System Logging Service...
         Stopping Regular background program processing daemon...
         Stopping OpenBSD Secure Shell server...
         Stopping LSB: Start NTP daemon...
         Stopping LSB: disk temperature monitoring daemon...
         Stopping LSB: Start/stop sysstat's sadc...
[  OK  ] Stopped target Login Prompts.
         Stopping Getty on tty1...
         Stopping Serial Getty on ttyS0...
         Stopping LSB: Advanced IEEE 802.11 management daemon...
         Stopping Unattended Upgrades Shutdown...
         Stopping LSB: Set sysfs variables from /etc/sysfs.conf...
         Stopping LSB: Armbian gathering hardware information...
[  OK  ] Stopped Regular background program processing daemon.
[  OK  ] Stopped System Logging Service.
[  OK  ] Stopped Authorization Manager.
[  OK  ] Stopped Getty on tty1.
[  OK  ] Stopped OpenBSD Secure Shell server.
[  OK  ] Stopped Serial Getty on ttyS0.
[  OK  ] Stopped User Manager for UID 1000.
[  OK  ] Stopped Session 3 of user pfeerick.
[  OK  ] Stopped Session 5 of user pfeerick.
[  OK  ] Stopped LSB: Advanced IEEE 802.11 management daemon.
[  OK  ] Stopped LSB: disk temperature monitoring daemon.
[  OK  ] Stopped LSB: Start NTP daemon.
[  OK  ] Stopped LSB: Start/stop sysstat's sadc.
[  OK  ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf.
         Stopping LSB: set CPUFreq kernel parameters...
[  OK  ] Removed slice User Slice of pfeerick.
         Stopping Login Service...
[  OK  ] Removed slice system-serial\x2dgetty.slice.
[  OK  ] Stopped /etc/rc.local Compatibility.
[  OK  ] Stopped target Network is Online.
[  OK  ] Stopped Network Manager Wait Online.
         Stopping Permit User Sessions...
[  OK  ] Removed slice system-getty.slice.
[  OK  ] Stopped Armbian first run tasks.
[  OK  ] Stopped Login Service.
[  OK  ] Stopped Permit User Sessions.
[  OK  ] Stopped LSB: set CPUFreq kernel parameters.
         Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
[  OK  ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped LSB: Armbian gathering hardware information.
[  OK  ] Stopped Unattended Upgrades Shutdown.
[  OK  ] Stopped target Network.
         Stopping Raise network interfaces...
         Stopping Network Manager...
[  OK  ] Stopped Network Manager.
[  OK  ] Stopped Raise network interfaces.
         Stopping D-Bus System Message Bus...
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed Syslog Socket.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Stopped target Paths.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Stopped target System Initialization.
         Stopping Update UTMP about System Boot/Shutdown...
[  OK  ] Stopped target Encrypted Volumes.
[  OK  ] Stopped Dispatch Password Requests to Console Directory Watch.
[  OK  ] Stopped Forward Password Requests to Wall Directory Watch.
[  OK  ] Stopped Apply Kernel Variables.
         Stopping Armbian enhanced Log2Ram...
[  OK  ] Stopped target Swap.
         Deactivating swap /var/swap...
[  OK  ] Stopped Load Kernel Modules.
         Stopping Entropy daemon using the HAVEGE algorithm...
         Stopping Restore / save the current clock...
[  OK  ] Stopped Entropy daemon using the HAVEGE algorithm.
[  OK  ] Stopped Restore / save the current clock.
         Stopping Load/Save Random Seed...
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Unmounted /var/log.
[  OK  ] Deactivated swap /var/swap.
[  OK  ] Unmounted /var/log.hdd.
[  OK  ] Stopped Armbian enhanced Log2Ram.
[  OK  ] Stopped target Local File Systems.
         Unmounting /run/user/1000...
         Unmounting /tmp...
[  OK  ] Unmounted /run/user/1000.
[  OK  ] Unmounted /tmp.
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped target Local File Systems (Pre).
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Stopped Create Static Device Nodes in /dev.
[  OK  ] Reached target Shutdown.
[  262.775833] reboot: Power down