API tools faq
paste
sta-s2z

Untitled

sta-s2z
Jan 16th, 2020
511
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Apache Log 85.76 KB | None | 0 0
raw download clone embed print report
  1. Format: Log Type - Time(microsec) - Message - Optional Info
  2. Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
  3. S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00118
  4. S - IMAGE_VARIANT_STRING=DAACANAZA
  5. S - OEM_IMAGE_VERSION_STRING=CRM
  6. S - Boot Config, 0x00000025
  7. S - Reset status Config, 0x00000000
  8. S - Core 0 Frequency, 0 MHz
  9. B -       261 - PBL, Start
  10. B -      1338 - bootable_media_detect_entry, Start
  11. B -      2609 - bootable_media_detect_success, Start
  12. B -      2623 - elf_loader_entry, Start
  13. B -      4026 - auth_hash_seg_entry, Start
  14. B -      6175 - auth_hash_seg_exit, Start
  15. B -     74209 - elf_segs_hash_verify_entry, Start
  16. B -    197561 - PBL, End
  17. B -    197585 - SBL1, Start
  18. B -    290845 - pm_device_init, Start
  19. D -         7 - pm_device_init, Delta
  20. B -    292336 - boot_flash_init, Start
  21. D -     87101 - boot_flash_init, Delta
  22. B -    383740 - boot_config_data_table_init, Start
  23. D -     13974 - boot_config_data_table_init, Delta - (419 Bytes)
  24. B -    400468 - clock_init, Start
  25. D -      7579 - clock_init, Delta
  26. B -    411483 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:1
  27. B -    414897 - sbl1_ddr_set_params, Start
  28. B -    419993 - cpr_init, Start
  29. D -         2 - cpr_init, Delta
  30. B -    424375 - Pre_DDR_clock_init, Start
  31. D -         4 - Pre_DDR_clock_init, Delta
  32. D -     13173 - sbl1_ddr_set_params, Delta
  33. B -    437685 - pm_driver_init, Start
  34. D -         2 - pm_driver_init, Delta
  35. B -    508165 - sbl1_wait_for_ddr_training, Start
  36. D -        28 - sbl1_wait_for_ddr_training, Delta
  37. B -    523492 - Image Load, Start
  38. D -    154664 - QSEE Image Loaded, Delta - (297240 Bytes)
  39. B -    678582 - Image Load, Start
  40. D -      2116 - SEC Image Loaded, Delta - (2048 Bytes)
  41. B -    688784 - Image Load, Start
  42. D -    216602 - APPSBL Image Loaded, Delta - (515460 Bytes)
  43. B -    905781 - QSEE Execution, Start
  44. D -        56 - QSEE Execution, Delta
  45. B -    911987 - SBL1, End
  46. D -    716509 - SBL1, Delta
  47. S - Flash Throughput, 2127 KB/s  (815167 Bytes,  383109 us)
  48. S - DDR Frequency, 672 MHz
  49.  
  50.  
  51. U-Boot 2012.07 [Standard IPQ806X.LN,unknown] (Jul 02 2019 - 11:17:57)
  52.  
  53. smem ram ptable found: ver: 1 len: 3
  54.  ---- init buttons ----
  55. DRAM:  256 MiB
  56. machid : 0x8010001
  57. NAND:  ID = 9580d1c8
  58. Vendor = c8
  59. Device = d1
  60. ONFI device found
  61. SF NAND unsupported id:ff:ff:ff:ffSF: Unsupported manufacturer ff
  62. ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
  63. 128 MiB
  64. MMC:  
  65. In:    serial
  66. Out:   serial
  67. Err:   serial
  68. machid: 8010001
  69. flash_type: 2
  70.  trigger button release!
  71.  miwifi: run bootmiwifi, buf = 0
  72.   miwifi: check crash in rmem !  
  73. nand read 0x84000000 kernel0
  74. Erasing Nand...
  75. Erasing at 0x3e0000 -- 100% complete.
  76. Writing to Nand... done
  77.  
  78. NAND read: device 0 offset 0x800000, size 0x400000
  79.  4194304 bytes read: OK
  80. ## Booting kernel from FIT Image at 84000000 ...
  81.    Using 'config@1' configuration
  82.    Trying 'kernel@1' kernel subimage
  83.      Description:  ARM OpenWrt Linux-3.14.77
  84.      Type:         Kernel Image
  85.      Compression:  gzip compressed
  86.      Data Start:   0x840000e4
  87.      Data Size:    3547304 Bytes = 3.4 MiB
  88.      Architecture: ARM
  89.      OS:           Linux
  90.      Load Address: 0x80208000
  91.      Entry Point:  0x80208000
  92.      Hash algo:    crc32
  93.      Hash value:   44042052
  94.      Hash algo:    sha1
  95.      Hash value:   d675ab93bcaf4ee1f4cdda30ea057b4fc53d7631
  96.    Verifying Hash Integrity ... crc32+ sha1+ OK
  97. ## Flattened Device Tree from FIT Image at 84000000
  98.    Using 'config@1' configuration
  99.    Trying 'fdt@1' FDT blob subimage
  100.      Description:  ARM OpenWrt miwifi-d01 device tree blob
  101.      Type:         Flat Device Tree
  102.      Compression:  uncompressed
  103.      Data Start:   0x843622c0
  104.      Data Size:    39709 Bytes = 38.8 KiB
  105.      Architecture: ARM
  106.      Hash algo:    crc32
  107.      Hash value:   b4c4da5e
  108.      Hash algo:    sha1
  109.      Hash value:   8ab7b17a993a3c9556226cae82c227bc5995f299
  110.    Verifying Hash Integrity ... crc32+ sha1+ OK
  111.    Booting using the fdt blob at 0x843622c0
  112.    Uncompressing Kernel Image ... OK
  113.    Loading Device Tree to 86ff3000, end 86fffb1c ... OK
  114. Device nand2 not found!
  115.  ft_board_setup, miwifi gmac_no = 4
  116.  , sfi->flash_type vs SMEM_BOOT_MMC_FLASH: 5 vs 132
  117.  ipq40xx_set_ethmac_addr, miwifi  eth0addr =  50:d2:f5:15:65:22
  118.  ipq40xx_set_ethmac_addr, miwifi  eth1addr =  50:d2:f5:15:65:23
  119.  ipq40xx_set_ethmac_addr, miwifi  eth2addr =  50:d2:f5:15:65:27
  120.  ipq40xx_set_ethmac_addr, miwifi  eth3addr =  50:d2:f5:15:65:28
  121. Using machid 0x8010001 from environment
  122.  
  123. Starting kernel ...
  124.  
  125. [    0.000000] Booting Linux on physical CPU 0x0
  126. [    0.000000] Initializing cgroup subsys cpuset
  127. [    0.000000] Linux version 3.14.77 (jenkins@0a51e4e9d27c) (gcc version 4.8.5 (crosstool-NG crosstool-ng-1.22.0) ) #1 MiWiFi-D019
  128. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  129. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  130. [    0.000000] Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1
  131. [    0.000000] Memory policy: Data cache writealloc
  132. [    0.000000] PERCPU: Embedded 7 pages/cpu @cfdc7000 s8000 r8192 d12480 u32768
  133. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60928
  134. [    0.000000] Kernel command line: <NULL> clk_ignore_unused
  135. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  136. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  137. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  138. [    0.000000] Memory: 236392K/245760K available (3871K kernel code, 270K rwdata, 1260K rodata, 895K init, 548K bss, 9368K reserv)
  139. [    0.000000] Virtual kernel memory layout:
  140. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  141. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  142. [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
  143. [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  144. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  145. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  146. [    0.000000]       .text : 0xc0208000 - 0xc070b174   (5133 kB)
  147. [    0.000000]       .init : 0xc070c000 - 0xc07ebf40   ( 896 kB)
  148. [    0.000000]       .data : 0xc07ec000 - 0xc082fbf8   ( 271 kB)
  149. [    0.000000]        .bss : 0xc082fbf8 - 0xc08b8c80   ( 549 kB)
  150. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  151. [    0.000000] Preemptible hierarchical RCU implementation.
  152. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  153. [    0.000000] Architected cp15 timer(s) running at 48.00MHz (virt).
  154. [    0.000009] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns
  155. [    0.000019] Switching to timer-based delay loop
  156. [    0.000271] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
  157. [    0.000290] pid_max: default: 32768 minimum: 301
  158. [    0.001033] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  159. [    0.001049] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  160. [    0.058331] Initializing cgroup subsys devices
  161. [    0.058511] CPU: Testing write buffer coherency: ok
  162. [    0.059222] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  163. [    0.059333] Setting up static identity map for 0x80213098 - 0x802130f0
  164. [    0.130998] CPU1: Booted secondary processor
  165. [    0.131042] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  166. [    0.150991] CPU2: Booted secondary processor
  167. [    0.151027] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  168. [    0.170988] CPU3: Booted secondary processor
  169. [    0.171022] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  170. [    0.171155] Brought up 4 CPUs
  171. [    0.171199] SMP: Total of 4 processors activated (384.00 BogoMIPS).
  172. [    0.171207] CPU: All CPU(s) started in SVC mode.
  173. [    0.172715] devtmpfs: initialized
  174. [    0.209829] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  175. [    0.211087] pinctrl core: initialized pinctrl subsystem
  176. [    0.212510] regulator-dummy: no parameters
  177. [    0.214253] NET: Registered protocol family 16
  178. [    0.215809] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  179. [    0.218605] cpuidle: using governor ladder
  180. [    0.218619] cpuidle: using governor menu
  181. [    0.240518]
  182. [    0.240518] Version Rollback Feature Disabled
  183. [    0.245501] <CORE> glink_init: unable to create log context
  184. [    0.247293] sps:sps is ready.
  185. [    0.261738] bio: create slab <bio-0> at 0
  186. [    0.265065] SD0 VccQ: 1800 <--> 3000 mV
  187. [    0.268009] SCSI subsystem initialized
  188. [    0.269110] msm_bus_fabric_init_driver
  189. [    0.269408] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  190. [    0.269425] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  191. [    0.269445] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
  192. [    0.269501] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  193. [    0.269517] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  194. [    0.269534] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
  195. [    0.327760] Switched to clocksource arch_sys_counter
  196. [    0.334658] NET: Registered protocol family 2
  197. [    0.336549] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  198. [    0.336618] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  199. [    0.336670] TCP: Hash tables configured (established 2048 bind 2048)
  200. [    0.336763] TCP: reno registered
  201. [    0.336780] UDP hash table entries: 256 (order: 1, 8192 bytes)
  202. [    0.336812] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  203. [    0.337537] NET: Registered protocol family 1
  204. [    0.830821] futex hash table entries: 1024 (order: 4, 65536 bytes)
  205. [    0.936341] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  206. [    0.936403] msgmni has been set to 461
  207. [    0.938977] Key type asymmetric registered
  208. [    0.938993] Asymmetric key parser 'x509' registered
  209. [    0.939070] io scheduler noop registered
  210. [    0.939082] io scheduler deadline registered (default)
  211. [    0.941086] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
  212. [    0.941277] tcsr 1953000.ess_tcsr: setting ess interface select = 1
  213. [    0.941457] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
  214. [    0.941602] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
  215. [    0.942522] glink_loopback_server_init: unable to create log context
  216. [    0.943934] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  217. [    0.947418] msm_serial_hsl_probe: detected port #0 (ttyMSM0)
  218. [    0.947462] msm_serial_hsl_probe: Bus scaling is disabled
  219. [    0.947907] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM
  220. [    0.947982] msm_hsl_console_setup: console setup on port #0
  221. [    1.499159] console [ttyMSM0] enabled
  222. [    1.504178] msm_serial_hsl_init: driver initialized
  223. [    1.509192] BLSP UART: Bus scaling is disabled.
  224. [    1.512694] unregister_client_adhoc: Null cl handle passed unregister
  225. [    1.519367] msm_serial_hs: probe of 78b0000.uart failed with error -2
  226. [    1.525690] msm_serial_hs module loaded
  227. [    1.530326] uart_tx_gpio is not available
  228. [    1.533360] uart_rx_gpio is not available
  229. [    1.537352] uart_cts_gpio is not available
  230. [    1.541472] uart_rfr_gpio is not available
  231. [    1.545530] Wakeup irq not specified.
  232. [    1.549231] BLSP UART: Bus scaling is disabled.
  233. [    1.553972] sps: BAM device 0x07884000 is not registered yet.
  234. [    1.559442] sps:BAM 0x07884000 is registered.
  235. [    1.564068] 78b0000.uart: ttyQHS0 at MMIO 0x78b0000 (irq = 140, base_baud = 460800) is a MSM HS UART
  236. [    1.574149] qca_serial_hs module loaded
  237. [    1.580979] sps: BAM device 0x07984000 is not registered yet.
  238. [    1.585711] sps:BAM 0x07984000 is registered.
  239. [    1.589901] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xcec31680
  240. [    1.598834] sps:BAM 0x07984000 (va:0xd0a60000) enabled: ver:0x19, number of pipes:7
  241. [    1.606574] msm_nand_version_check: nand_major:1, nand_minor:4, qpic_major:1, qpic_minor:4
  242. [    1.614820] msm_nand_flash_onfi_probe: Found an ONFI compliant device PSU1GA30DT          �
  243. [    1.622868] msm_nand_scan: NAND Id: 0x9580d1c8 Buswidth: 8Bits Density: 128 MByte
  244. [    1.630328] msm_nand_scan: pagesize: 2048 Erasesize: 131072 oobsize: 64 (in Bytes)
  245. [    1.637876] msm_nand_scan: BCH ECC: 4 Bit
  246. [    1.641867] msm_nand_scan: CFG0: 0x2a0408c0,      CFG1: 0x0804745c
  247. [    1.641867]             RAWCFG0: 0x280420c0,   RAWCFG1: 0x0005045d
  248. [    1.641867]           ECCBUFCFG: 0x00000203, ECCBCHCFG: 0x42040700
  249. [    1.641867]      BAD BLOCK BYTE: 0x000001d1
  250. [    1.664645] 17 ofpart partitions found on MTD device 7980000.qcom,nand
  251. [    1.671042] Creating 17 MTD partitions on "7980000.qcom,nand":
  252. [    1.676862] 0x000000000000-0x000000100000 : "0:SBL1"
  253. [    1.686979] 0x000000100000-0x000000200000 : "0:MIBIB"
  254. [    1.696211] 0x000000200000-0x000000300000 : "0:QSEE"
  255. [    1.705233] 0x000000300000-0x000000380000 : "0:CDT"
  256. [    1.713813] 0x000000380000-0x000000400000 : "0:APPSBLENV"
  257. [    1.722856] 0x000000400000-0x000000600000 : "0:APPSBL"
  258. [    1.732719] 0x000000600000-0x000000680000 : "0:ART"
  259. [    1.741374] 0x000000680000-0x000000700000 : "rsvd0"
  260. [    1.750104] 0x000000700000-0x000000740000 : "bdata"
  261. [    1.758506] 0x000000740000-0x000000780000 : "crash"
  262. [    1.766846] 0x000000780000-0x000000800000 : "crash_syslog"
  263. [    1.776104] 0x000000800000-0x000000c00000 : "kernel0"
  264. [    1.787369] 0x000000c00000-0x000001000000 : "kernel1"
  265. [    1.798647] 0x000001000000-0x000003000000 : "rootfs0"
  266. [    1.830318] 0x000003000000-0x000005000000 : "rootfs1"
  267. [    1.861894] 0x000005000000-0x000007f00000 : "overlay"
  268. [    1.904349] 0x000007f00000-0x000008000000 : "cfg_bak"
  269. [    1.913554] msm_nand_probe: NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 133
  270. [    1.920917] msm_nand_probe: Allocated DMA buffer at virt_addr 0xd0a3c000, phys_addr 0x8f114000
  271. [    1.948375] libphy: ipq40xx_mdio: probed
  272. [    1.956280] ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered
  273. [    1.962083] i2c /dev entries driver
  274. [    1.971196] Netfilter messages via NETLINK v0.30.
  275. [    1.974903] nfnl_acct: registering with nfnetlink.
  276. [    1.979881] nf_conntrack version 0.5.0 (3693 buckets, 14772 max)
  277. [    1.989507] gre: GRE over IPv4 demultiplexor driver
  278. [    1.993848] ip_tables: (C) 2000-2006 Netfilter Core Team
  279. [    1.999343] TCP: cubic registered
  280. [    2.015003] NET: Registered protocol family 10
  281. [    2.026758] ip6_tables: (C) 2000-2006 Netfilter Core Team
  282. [    2.031801] NET: Registered protocol family 17
  283. [    2.037620] Bridge firewalling registered
  284. [    2.040763] l2tp_core: L2TP core driver, V2.0
  285. [    2.044936] l2tp_netlink: L2TP netlink interface
  286. [    2.049655] 8021q: 802.1Q VLAN Support v1.8
  287. [    2.053873] Registering SWP/SWPB emulation handler
  288. [    2.063171] SD0 VccQ: disabling
  289. [    2.065281] regulator-dummy: disabling
  290. [    2.098604]  crash_kernel_init, res rsvd1, 87000000, 500000, /reserved-memory/rsvd1@87000000  
  291. [    2.106190]  mtd dev crash, size 0x40000
  292. [    2.110438]  crash_kernel_init,  crash init, crash_buf_len 0x3ffe4, crash_avail_sz 0x40000
  293. [    2.118531]  Crash kernel dumper registered ok!
  294. [    2.122978]  crash_syslog_init, res rsvd2, 87b00000, 500000, /reserved-memory/rsvd2@87B00000  
  295. [    2.131726]  mtd dev crash_syslog, size 0x80000
  296. [    2.137108]  crash_syslog_init,  crash init, crash_buf_len 0x3ffe4, crash_avail_sz 0x40000  
  297. [    2.144801]  Crash syslog dumper register ok!
  298. [    2.149174] Crash nvram notifier registered
  299. [    2.153329] clk: Not disabling unused clocks
  300. [    2.159233] Freeing unused kernel memory: 892K (c070c000 - c07eb000)
  301. [    2.243648] Loading essential drivers...
  302. [    2.246816] Press Ctrl+C to enter RAMFS...
  303. [    3.256124] Check for USB recovery...
  304. [    3.300140] Bringup the system...
  305. [    3.324025] flag_boot_rootfs=0 mounting /dev/mtd13
  306. [    3.333713] UBI: attaching mtd13 to ubi0
  307. [    3.480631] UBI: scanning is finished
  308. [    3.495923] UBI: attached mtd13 (name "rootfs0", size 32 MiB) to ubi0
  309. [    3.501373] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  310. [    3.508119] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  311. [    3.514784] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  312. [    3.521658] UBI: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0
  313. [    3.527547] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  314. [    3.534681] UBI: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 671004102
  315. [    3.543620] UBI: available PEBs: 31, total reserved PEBs: 225, PEBs reserved for bad PEB handling: 20
  316. [    3.552844] UBI: background thread "ubi_bgt0d" started, PID 103
  317. UBI device number 0, total 256 LEBs (32505856 bytes, 31.0 MiB), available 31 LEBs (3936256 bytes, 3.8 MiB), LEB size 126976 bytes)
  318. config core 'version'
  319.         # ROM ver
  320.         option ROM '1.0.68'
  321.         # channel
  322.         option CHANNEL 'release'
  323.         # hardware platform.
  324.         option HARDWARE 'D01'
  325.         # CFE ver
  326.         option UBOOT '1.0.2'
  327.         # Linux Kernel ver
  328.         option LINUX '0.0.2'
  329.         # RAMFS ver
  330.         option RAMFS '0.0.2'
  331.         # SQUASHFS ver
  332.         option SQAFS '0.0.2'
  333.         # ROOTFS ver
  334.         option ROOTFS '0.0.2'
  335.         #build time
  336.         option BUILDTIME 'Thu, 19 Sep 2019 06:46:14 +0000'
  337.         #build timestamp
  338.         option BUILDTS '1568875574'
  339.         #build git tag
  340.         option GTAG 'commit 1e4132ef1a38f03826422f17936b939e34b870bd'
  341. mount: mounting proc on /proc failed: Device or resource busy
  342. mount: mounting sysfs on /sys failed: Device or resource busy
  343. - preinit -
  344. Thu Sep 19 06:58:49 UTC 2019
  345. - regular preinit -
  346. /lib/preinit.sh: line 1: pi_indicate_led: not found
  347. [    5.619689] UBI: attaching mtd15 to ubi1
  348. [    5.837587] UBI: scanning is finished
  349. [    5.854726] UBI: attached mtd15 (name "overlay", size 47 MiB) to ubi1
  350. [    5.860180] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  351. [    5.866904] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  352. [    5.873605] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  353. [    5.880461] UBI: good PEBs: 376, bad PEBs: 0, corrupted PEBs: 0
  354. [    5.886349] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  355. [    5.893484] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1737296142
  356. [    5.902510] UBI: available PEBs: 0, total reserved PEBs: 376, PEBs reserved for bad PEB handling: 20
  357. [    5.911646] UBI: background thread "ubi_bgt1d" started, PID 154
  358. UBI device number 1, total 376 LEBs (47742976 bytes, 45.5 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
  359. [    5.929667] UBIFS: background thread "ubifs_bgt1_0" started, PID 156
  360. [    5.959704] UBIFS: recovery needed
  361. [    6.067832] UBIFS: recovery completed
  362. [    6.070707] UBIFS: mounted UBI device 1, volume 0, name "data"
  363. [    6.076287] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  364. [    6.085431] UBIFS: FS size: 43425792 bytes (41 MiB, 342 LEBs), journal size 2158592 bytes (2 MiB, 17 LEBs)
  365. [    6.095050] UBIFS: reserved for root: 2051106 bytes (2003 KiB)
  366. [    6.100866] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C7446E4F-AB2E-41DC-A893-FBCD62687D23, small LPT model
  367. /lib/preinit.sh: line 1: jffs2_not_mounted: not found
  368. 377+0 records in
  369. 377+0 records out
  370. 12064 bytes (11.8KB) copied, 0.026494 seconds, 444.7KB/s
  371. 377+0 records in
  372. 377+0 records out
  373. 12064 bytes (11.8KB) copied, 0.028993 seconds, 406.3KB/s
  374. - init -
  375. init started: BusyBox v1.19.4 (2019-09-19 06:41:13 UTC)
  376.  
  377. Please press Enter to activate this console. rcS S boot: INFO: rc script run time limit to 200 seconds.
  378. [    9.197452] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
  379. [    9.203710] qcrypto 8e20000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x8e20000
  380. [    9.211159] qcrypto 8e20000.qcrypto: CE device = 0x0
  381. [    9.211159] , IO base, CE = 0xd12c0000
  382. [    9.211159] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
  383. [    9.211159] IO base BAM = 0x  (null)
  384. [    9.211159] BAM IRQ 239
  385. [    9.211159] Engines Availability = 0x2010453
  386. [    9.235740] QCE50: qce_sps_get_bam: qce50 don't support command descriptor. bam_cfg0
  387. [    9.243461] sps:BAM 0x08e04000 is registered.
  388. [    9.248582] sps:BAM 0x08e04000 (va:0xd1300000) enabled: ver:0x27, number of pipes:4
  389. [    9.256416] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000008e04000 irq 239
  390. [    9.263126] bus_scale_table is NULL
  391. [    9.266798] qcrypto 8e20000.qcrypto: qcrypto-ecb-aes
  392. [    9.271726] qcrypto 8e20000.qcrypto: qcrypto-cbc-aes
  393. [    9.276621] qcrypto 8e20000.qcrypto: qcrypto-ctr-aes
  394. [    9.281592] qcrypto 8e20000.qcrypto: qcrypto-ecb-des
  395. [    9.286511] qcrypto 8e20000.qcrypto: qcrypto-cbc-des
  396. [    9.291487] qcrypto 8e20000.qcrypto: qcrypto-ecb-3des
  397. [    9.296488] qcrypto 8e20000.qcrypto: qcrypto-cbc-3des
  398. [    9.301551] qcrypto 8e20000.qcrypto: qcrypto-xts-aes
  399. [    9.306472] qcrypto 8e20000.qcrypto: qcrypto-sha1
  400. [    9.311242] qcrypto 8e20000.qcrypto: qcrypto-sha256
  401. [    9.316026] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  402. [    9.322312] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  403. [    9.328559] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  404. [    9.334840] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  405. [    9.341323] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  406. [    9.347713] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  407. [    9.354248] qcrypto 8e20000.qcrypto: qcrypto-hmac-sha1
  408. [    9.359379] qcrypto 8e20000.qcrypto: qcrypto-hmac-sha256
  409. [    9.364612] qcrypto 8e20000.qcrypto: qcrypto-aes-ccm
  410. [    9.369604] qcrypto 8e20000.qcrypto: qcrypto-rfc4309-aes-ccm
  411. [    9.375016] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  412. [    9.834428] PPP generic driver version 2.4.2
  413. [   10.473669] ssdk_alloc_priv[4510]:INFO:ess-switch dts node number: 1
  414. [   10.479156] ssdk_dt_parse[2662]:INFO:ess-switch DT exist!
  415. [   10.484394] ssdk_dt_parse[2691]:INFO:switch_access_mode: local bus
  416. [   10.490538] ssdk_dt_parse_mac_mode[2290]:INFO:mac mode = 0x1
  417. [   10.496178] ssdk_dt_parse_mac_mode[2296]:INFO:mac mode1 doesn't exit!
  418. [   10.502603] ssdk_dt_parse_mac_mode[2305]:INFO:mac mode2 doesn't exit!
  419. [   10.509082] ssdk_dt_parse_uniphy[2324]:INFO:ess-uniphy DT doesn't exist!
  420. [   10.515712] ssdk_dt_parse_scheduler_cfg[2514]:ERROR:cannot find port_scheduler_resource node
  421. [   10.524129] ssdk_dt_parse_phy_info[2557]:INFO:qcom,port_phyinfo DT doesn't exist!
  422. [   10.531618] ssdk_dt_parse_mdio[2594]:INFO:mdio DT exist!
  423. [   10.536898] ssdk_dt_parse[2717]:INFO:switchreg_base_addr: 0xc000000
  424. [   10.543139] ssdk_dt_parse[2718]:INFO:switchreg_size: 0x80000
  425. [   10.548828] ssdk_dt_parse[2727]:INFO:ess-psgmii DT exist!
  426. [   10.554166] ssdk_dt_parse[2784]:INFO:current dts led_source_num is 0
  427. [   10.560525] ssdk_plat_init start
  428. [   10.563924] enable ess clk
  429. [   10.677837] ssdk_probe[1868]:INFO:reset ok in probe!
  430. [   10.746323] malibu_phy_api_ops_init[2525]:INFO:qca probe malibu phy driver succeeded!
  431. [   10.761059] malibu_phy_hw_init[2416]:INFO: miwifi: setup qca8075 phyled ctrl pattern!
  432. [   10.779045] malibu_phy_hw_init[2416]:INFO: miwifi: setup qca8075 phyled ctrl pattern!
  433. [   10.796999] malibu_phy_hw_init[2416]:INFO: miwifi: setup qca8075 phyled ctrl pattern!
  434. [   10.814970] malibu_phy_hw_init[2416]:INFO: miwifi: setup qca8075 phyled ctrl pattern!
  435. [   10.827702] regi_init[4615]:INFO:Initializing DESS!!
  436. [   10.831629] QCA SSDK: PSGMII self test start, skip phy bitmap 0x0011
  437. [   11.481967] ssdk_psgmii_phy_testing_printf[1953]:INFO:tx_ok = 0x3000, rx_ok = 0x3000, tx_counter_error = 0x0, rx_counter_error0
  438. [   11.492861] ssdk_psgmii_phy_testing_printf[1955]:INFO:PHY 1 single PSGMII test pass
  439. [   11.717896] ssdk_psgmii_phy_testing_printf[1953]:INFO:tx_ok = 0x3000, rx_ok = 0x3000, tx_counter_error = 0x0, rx_counter_error0
  440. [   11.728789] ssdk_psgmii_phy_testing_printf[1955]:INFO:PHY 2 single PSGMII test pass
  441. [   11.953812] ssdk_psgmii_phy_testing_printf[1953]:INFO:tx_ok = 0x3000, rx_ok = 0x3000, tx_counter_error = 0x0, rx_counter_error0
  442. [   11.964703] ssdk_psgmii_phy_testing_printf[1955]:INFO:PHY 3 single PSGMII test pass
  443. [   12.190129] ssdk_psgmii_all_phy_testing_printf[1965]:INFO:tx_ok = 0x3000, rx_ok = 0x3000, tx_counter_error = 0x0, rx_counter_e0
  444. [   12.201374] ssdk_psgmii_all_phy_testing_printf[1967]:INFO:PHY 1 all PSGMII test pass
  445. [   12.213422] ssdk_psgmii_all_phy_testing_printf[1965]:INFO:tx_ok = 0x3000, rx_ok = 0x3000, tx_counter_error = 0x0, rx_counter_e0
  446. [   12.224664] ssdk_psgmii_all_phy_testing_printf[1967]:INFO:PHY 2 all PSGMII test pass
  447. [   12.236686] ssdk_psgmii_all_phy_testing_printf[1965]:INFO:tx_ok = 0x3000, rx_ok = 0x3000, tx_counter_error = 0x0, rx_counter_e0
  448. [   12.247926] ssdk_psgmii_all_phy_testing_printf[1967]:INFO:PHY 3 all PSGMII test pass
  449. [   12.255627] ssdk_psgmii_all_phy_testing[2091]:INFO:PHY final test result: 0x0
  450. [   12.262921] ssdk_psgmii_self_test[2166]:INFO:PSGMII recovered after 0 times reset
  451. [   12.278038] ssdk_switch_register[1591]:INFO:Chip version 0x1401
  452. [   12.282992] qca_link_polling_select[1285]:INFO:link-polling-required node does not exist
  453. [   12.291021] ssdk_switch_register[1614]:INFO:polling is selected
  454. [   12.296900] regi_init[4624]:INFO:Initializing DESS Done!!
  455. [   12.302500] regi_init[4648]:INFO:qca-ssdk module init succeeded!
  456. [   12.339761] PPP MPPE Compression module registered
  457. [   12.406378] **********************************************************
  458. [   12.411921] * Driver    :NSS GMAC Driver for RTL v(3.72a)
  459. [   12.417257] * Version   :1.0
  460. [   12.420147] * Copyright :Copyright (c) 2013-2016 The Linux Foundation. All rights reserved.
  461. [   12.428501] **********************************************************
  462. [   12.552127] Mirror/redirect action on
  463. [   12.648457] u32 classifier
  464. [   12.650134]     input device check on
  465. [   12.653776]     Actions configured
  466. [   12.862686] qca-nss-drv.ko is loaded for symbol link
  467. [   12.986587] sit: Unknown symbol ip_tunnel_rcv (err 0)
  468. [   12.990798] sit: Unknown symbol ip_tunnel_dst_reset_all (err 0)
  469. [   12.996613] sit: Unknown symbol ip_tunnel_xmit (err 0)
  470. [   13.099765] ip_gre: Unknown symbol ip_tunnel_rcv (err 0)
  471. [   13.104079] ip_gre: Unknown symbol ip_tunnel_change_mtu (err 0)
  472. [   13.110089] ip_gre: Unknown symbol ip_tunnel_init_net (err 0)
  473. [   13.115719] ip_gre: Unknown symbol ip_tunnel_changelink (err 0)
  474. [   13.121639] ip_gre: Unknown symbol ip_tunnel_ioctl (err 0)
  475. [   13.127084] ip_gre: Unknown symbol ip_tunnel_init (err 0)
  476. [   13.132490] ip_gre: Unknown symbol ip_tunnel_delete_net (err 0)
  477. [   13.138411] ip_gre: Unknown symbol ip_tunnel_uninit (err 0)
  478. [   13.143918] ip_gre: Unknown symbol ip_tunnel_newlink (err 0)
  479. [   13.149578] ip_gre: Unknown symbol ip_tunnel_dellink (err 0)
  480. [   13.155196] ip_gre: Unknown symbol ip_tunnel_setup (err 0)
  481. [   13.160701] ip_gre: Unknown symbol ip_tunnel_xmit (err 0)
  482. [   13.166048] ip_gre: Unknown symbol ip_tunnel_lookup (err 0)
  483. [   13.190326] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  484. [   13.314962] xt_time: kernel timezone is +0800
  485. [   13.385646] NET: Registered protocol family 24
  486. [   13.497124] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  487. [   13.516633] PPTP driver version 0.8.5
  488. [   13.581803] QCA multicast snooping installed successfully
  489. [   14.236767] register dev[eth0] with mtu[1500]
  490. [   14.244731] register dev[eth1] with mtu[1500]
  491. [   14.252674] register dev[eth2] with mtu[1500]
  492. [   14.260301] register dev[eth3] with mtu[1500]
  493. [   14.697141] nf_conntrack_rtsp v0.6.21 loading
  494. [   14.715846] nf_nat_rtsp v0.6.21 loading
  495. [   14.781707] ip_set: protocol 6
  496. [   14.924044]  @@@@@@@ debug hyfi proc init!
  497. [   14.930917] QCA Hy-Fi multicast installation successfully
  498. [   14.951242] ipaccount: ifname [lo] event[5]
  499. [   14.954430] ipaccount: ifname [ifb0] event[5]
  500. [   14.958859] ipaccount: ifname [miireg] event[5]
  501. [   14.963286] ipaccount: ifname [bond0] event[5]
  502. [   14.967706] ipaccount: ifname [eth0] event[5]
  503. [   14.972091] ipaccount: ifname [eth1] event[5]
  504. [   14.976391] ipaccount: ifname [eth2] event[5]
  505. [   14.980860] ipaccount: ifname [eth3] event[5]
  506. [   15.041900] fuse init (API version 7.22)
  507. [   15.519224] ipaccount: ifname [bond0] event[11]
  508. [   15.888174] random: nonblocking pool is initialized
  509. [   16.698286] ipaccount: ifname [eth0] event[11]
  510. [   16.706399] ipaccount: ifname [eth1] event[11]
  511. [   16.714676] ipaccount: ifname [eth2] event[11]
  512. [   16.723531] ipaccount: ifname [eth3] event[11]
  513. [   16.731762] ipaccount: ifname [eth0] event[11]
  514. [   16.740139] ipaccount: ifname [eth1] event[11]
  515. [   16.748668] ipaccount: ifname [eth2] event[11]
  516. [   16.757277] ipaccount: ifname [eth3] event[11]
  517. [   22.207940] ECM init
  518. [   22.209199] ECM database jhash random seed: 0x32ffa222
  519. [   22.216586] ECM init complete
  520. rcS S calling: /etc/rc.d/S19qca-nss-ecm boot: logexec: exitcode 1, runt 200 /etc/rc.d/S19qca-nss-ecm boot
  521. [   23.422857] ipaccount: ifname [br-lan] event[16]
  522. [   23.430593] ipaccount: ifname [br-lan] event[5]
  523. [   23.435420] ipaccount: ifname [eth1] event[13]
  524. [   23.440210] ipaccount: ifname [eth1] event[1]
  525. [   23.444593] ipaccount: ifname [eth1] event[20]
  526. [   23.448378] device eth1 entered promiscuous mode
  527. [   23.453894] ipaccount: ifname [eth1] event[21]
  528. [   23.457520] ipaccount: ifname [br-lan] event[11]
  529. [   23.462474] ipaccount: ifname [br-lan] event[8]
  530. [   23.466601] ipaccount: ifname [eth1] event[24]
  531. [   23.471569] ipaccount: ifname [br-lan] event[8]
  532. [   23.475432] ipaccount: ifname [br-lan] event[13]
  533. [   23.480164] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  534. [   23.485992] ipaccount: ifname [br-lan] event[1]
  535. [   23.498688] ipaccount: ifname [eth2] event[13]
  536. [   23.504353] ipaccount: ifname [eth2] event[1]
  537. [   23.509576] ipaccount: ifname [eth2] event[20]
  538. [   23.513003] device eth2 entered promiscuous mode
  539. [   23.519243] ipaccount: ifname [eth2] event[21]
  540. [   23.522995] ipaccount: ifname [eth2] event[24]
  541. [   23.529850] ipaccount: ifname [eth3] event[13]
  542. [   23.533616] ipaccount: ifname [eth3] event[1]
  543. [   23.538781] ipaccount: ifname [eth3] event[20]
  544. [   23.542208] device eth3 entered promiscuous mode
  545. [   23.548482] ipaccount: ifname [eth3] event[21]
  546. [   23.552277] ipaccount: ifname [eth3] event[24]
  547. [   23.556849] ipaccount: ifname [ifb0] event[13]
  548. [   23.561724] ipaccount: ifname [ifb0] event[1]
  549. [   23.566745] ipaccount: ifname [lo] event[13]
  550. [   23.572844] ipaccount: ifname [lo] event[1]
  551. [   23.581506] ipaccount: ifname [eth0] event[13]
  552. [   23.586978] ipaccount: ifname [eth0] event[1]
  553. xqwhc_hyd: **ppid=1, cmd=<init>
  554. xqwhc_hyd:  *parent ppid 0, cmd=<>
  555. xqwhc_hyd:  stop hyd-lan daemon
  556. xqwhc_hyd: **ppid=1363, cmd=</bin/sh/sbin/wifidown>
  557. xqwhc_hyd:  *parent ppid 1278, cmd=</bin/sh/sbin/wifidown>
  558. xqwhc_hyd:  stop hyd-lan daemon
  559. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  560. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  561. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  562. xqwhc_hyd:  stop hyd-guest daemon
  563. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  564. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  565. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  566. xqwhc_hyd:  stop hyd-guest daemon
  567. [   24.427885] br-lan: port 3(eth3) entered forwarding state
  568. [   24.432368] br-lan: port 3(eth3) entered forwarding state
  569. [   24.438022] ipaccount: ifname [eth3] event[4]
  570. [   24.442194] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  571. [   24.449684] ipaccount: ifname [br-lan] event[4]
  572. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  573. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  574. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  575. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  576. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  577. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  578. [   24.843843] hyfi_netlink_receive:108:hyfi: Not attached to bridge br-lan
  579. [   25.337360] __mc_netlink_receive: Disable bridge snooping!
  580. hyd: some interface(s) are not ready.
  581. hyd: ERROR: Private network interface checking failed
  582. qcawifi disable radio wifi0
  583. xqwhc_hyd:  stop hyd-lan daemon
  584. qcawifi disable radio wifi1
  585. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  586. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  587. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  588. xqwhc_hyd:  stop hyd-guest daemon
  589. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  590. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  591. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  592. xqwhc_hyd: **ppid=2185, cmd=</bin/sh/sbin/wifiup>
  593. xqwhc_hyd:  *parent ppid 2129, cmd=</bin/sh/sbin/wifiup>
  594. xqwhc_hyd:  stop hyd-lan daemon
  595. [   26.427795] br-lan: port 3(eth3) entered forwarding state
  596. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  597. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  598. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  599. xqwhc_hyd:  stop hyd-guest daemon
  600. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  601. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  602. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  603. [   26.948461] hyfi_netlink_receive:108:hyfi: Not attached to bridge br-lan
  604. [   27.110655] __mc_netlink_receive: Disable bridge snooping!
  605. qcawifi disable radio wifi0
  606. qcawifi disable radio wifi1
  607. qcawifi: enable radio wifi0
  608. [   27.664442] mem_manager: module license 'unspecified' taints kernel.
  609. [   27.669879] Disabling lock debugging due to kernel taint
  610. [   27.849384] ath_dfs: Version 2.0.0
  611. [   27.849384] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  612. [   27.931925] ath_spectral: Version 2.0.0
  613. [   27.931925] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
  614. xqwhc_hyd: **ppid=1049, cmd=</bin/sh/etc/hotplug.d/net/30-hyd>
  615. xqwhc_hyd:  *parent ppid 1, cmd=<init>
  616. xqwhc_hyd:  stop hyd-lan daemon
  617. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  618. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  619. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  620. xqwhc_hyd:  stop hyd-guest daemon
  621. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  622. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  623. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  624. [   29.100886] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D)
  625. [   29.190706] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
  626. [   29.265050] ath_tx99: Version 2.0
  627. [   29.265050] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
  628. hyd: some interface(s) are not ready.
  629. hyd: ERROR: Private network interface checking failed
  630. xqwhc_hyd:  stop hyd-lan daemon
  631. [   29.497258] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
  632. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  633. [   29.661431] ath_da_pci:  (Atheros/multi-bss)
  634. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  635. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  636. xqwhc_hyd:  stop hyd-guest daemon
  637. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  638. xqwhc_hyd:  ***exception, wl1 is not in bridge lan...
  639. xqwhc_hyd:  ***exception, wl0 is not in bridge lan...
  640. [   30.208944]  *********** IPQ4019  *************
  641. [   30.212830] Wifi0 CPU frequency 250000000
  642. [   30.216441]
  643. [   30.239574] hif_target_sync_ahb: Got FW signal, retries = 1
  644. [   30.244122] hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xb
  645. [   30.252006] hif_config_ce: ce_init done
  646. [   30.254808] hif_config_ce: X, ret = 0
  647. [   30.259327] hif_set_hia: E
  648. [   30.267671] hif_pci_bus_configure: hif_set_hia done
  649. [   30.272384] hif_configure_irq: E
  650. [   30.274814] hif_enable: X OK
  651. [   30.277612] qca_napi_create: napi instance 32 created on pipe 4
  652. [   30.285405]
  653. [   30.285405] __ol_ath_attach() Allocated scn cc5804c0
  654. [   30.291922] __ol_ath_attach: dev name wifi0
  655. [   30.295105] ol_ath_attach interface_id 0
  656. [   30.300420] ol_target_init() BMI inited.
  657. [   30.303442] ol_target_init() BMI Get Target Info.
  658. [   30.309025] Chip id: 0xb, chip version: 0x1000000
  659. [   30.312703]
  660. [   30.312703]  CE WAR Disabled
  661. [   30.317242] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  662. [   30.324277] ol_target_init() configure Target .
  663. [   30.328571]
  664. [   30.328571]  Target Version is 1000000
  665. [   30.332999]
  666. [   30.332999]  Flash Download Address  c0000
  667. [   30.338670] ol_transfer_bin_file: flash data file defined
  668. [   30.344023] ol_transfer_bin_file[3780] Get Caldata for wifi0.
  669. [   30.349947] qc98xx_verify_checksum: flash checksum passed: 0xb810
  670. [   30.355828] ol_transfer_bin_file 3841: Download Flash data len 12064
  671. [   30.362623] Board extended Data download address: 0x0
  672. [   30.386795]
  673. [   30.386795]  Board data initialized
  674. [   30.390920] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
  675. [   30.398366]
  676. [   30.398366]  Selecting  OTP binary for CHIP Version -1064640892
  677. [   30.422040] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  678. [   30.429336] ol_transfer_bin_file 3661: downloading file 0, Download data len 4676
  679. [   30.454473]
  680. [   30.454473]  First OTP send param 8000
  681. [   30.464771] ol_ath_download_firmware :First OTP download and Execute is good address:0x5000 return param 4660
  682. [   30.473763] ol_ath_download_firmware:##Board Id 20 , CHIP Id 0
  683. [   30.479737] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
  684. [   30.486508]
  685. [   30.486508]  wifi0: Selecting board data file name boardData_1_0_IPQ4019_DK04_2G.bin
  686. [   30.495744] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_DK0n
  687. [   30.629110] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  688. [   30.635593] ol_transfer_bin_file 3661: downloading file 3, Download data len 12064
  689. [   30.643607] Board extended Data download address: 0x0
  690. [   30.667965] ol_ath_download_firmware: Using 0x1234 for the remainder of init
  691. [   30.673983]
  692. [   30.673983]  Selecting  OTP binary for CHIP Version -1064640892
  693. [   30.681715] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  694. [   30.688898] ol_transfer_bin_file 3661: downloading file 0, Download data len 4676
  695. [   30.712864]
  696. [   30.712864]  [Flash] : Ignore Module param
  697. [   30.717538]
  698. [   30.717538]  Second otp download Param 10000
  699. [   30.736578] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  700. [   30.744623]
  701. [   30.744623]  Mission mode: Firmware CHIP Version -1064640892
  702. [   30.753436] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  703. [   30.761069] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
  704. [   30.768329] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  705. [   30.775143] ol_swap_wlan_memory_expansion: length:185211 size_left:185231 dma_size_left:262144 fw_temp:d2a01004 fw_entry_size:5
  706. [   30.787030] ol_swap_wlan_memory_expansion: dma_virt_addr :d27a2000 fw_temp: d2a01008 length: 185211
  707. [   30.796256] Swap: bytes_left to copy: fw:16; dma_page:76933
  708. [   30.801619] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:76933 fw_temp:d2a2e387 fw_entry_size:185235
  709. [   30.812686] Swap: wrong length read:0
  710. [   30.816221] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 185211 Target address 4183f0
  711. [   30.826321] scn=cc5804c0  target_write_addr=4183f0 seg_info=cd4b7910
  712. [   30.832370] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
  713. [   30.841104] bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
  714. [   30.853772] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
  715. [   31.195602] ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
  716. [   31.202155] ol_transfer_bin_file 3661: downloading file 1, Download data len 379472
  717. [   32.471066] ol_target_init() Download FW done.
  718. [   32.474704]
  719. [   32.474704] ol_ath_copy_tgt_iram() iram read paddr: 0x980000 host paddr 0x87500000 Radio id 0
  720. [   32.651358] ol_ath_attach() WMI attached. wmi_handle cdbe0000
  721. [   32.656166] wmi_unified_register_event_handler: Event id 62 is unavailable
  722. [   32.663328] htc_wmi_init() HT Create . cd7a4a40
  723. [   32.667651] htc_wmi_init 7768 host_enable 0 nss_nwifi_offload 0
  724. [   32.673496] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  725. [   32.682833]  OL_ACBKMinfree : 0
  726. [   32.685961]  OL_ACBEMinfree : 0
  727. [   32.689078]  OL_ACVIMinfree : 0
  728. [   32.692183]  OL_ACVOMinfree : 0
  729. [   32.695312] +HWT
  730. [   32.737600] -HWT
  731. [   32.738515] Startup Mode-0 set
  732. [   32.741453]
  733. [   32.741453] <=== cfg max peer id 1056 ====>
  734. [   32.749063] htt_peer_map_timer_init Enter pdev cb3b8000 hrtimer cb3bc948
  735. [   32.754743]
  736. [   32.754743]  htt_alloc_peer_map_mem : Alloc Success : host q vaddr cbaf2040 paddr 8baf2040
  737. [   32.764544]
  738. [   32.764544]  htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  739. [   32.807157] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from ca8e0000
  740. [   32.816273] Firmware_Build_Number:50
  741. [   32.818963] FW wireless modes: 0x680c
  742. [   32.822562] num_rf_chain:0x00000002  ht_cap_info:0x0000085b  vht_cap_info:0x339959b2  vht_supp_mcs:0x0000fffa
  743. [   32.832474] btcoex_support 1, wlan_prio_gpio 52, coex_gpio_pin 0 0 0
  744. [   32.838839] wmi_service_coex_gpio 1, wmi_service_4_wire_coex_support 1, coex_version 2
  745. [   32.846750]
  746. [   32.846750] Sending Ext resource cfg: HOST PLATFORM as 0
  747. [   32.846750] fw_feature_bitmap as 52 to TGT
  748. [   32.857665] ol_ath_service_ready_event: tt_support: 1
  749. [   32.862605] ol_ath_service_ready_event: periodic_chan_stats: 1
  750. [   32.868439] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
  751. [   32.874739] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
  752. [   32.884229] Ext stats enabled. num_peers 277, num_vdevs 17, num_tids 104
  753. [   32.890968] EXT NSS Supported
  754. [   32.893855] idx 1 req 2  num_units 1 num_unit_info 12 unit size 256 actual units 53
  755. [   32.901654] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
  756. [   32.909050] idx 2 req 3  num_units 1 num_unit_info 12 unit size 1024 actual units 53
  757. [   32.916935] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
  758. [   32.924410] idx 3 req 4  num_units 1 num_unit_info 12 unit size 4096 actual units 53
  759. [   32.932426] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
  760. [   32.939775] idx 0 req 1  num_units 0 num_unit_info 2 unit size 744 actual units 278
  761. [   32.947677] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 278 unit_len 744,
  762. [   32.955050] idx 4 req 6  num_units 35 num_unit_info 0 unit size 3072 actual units 35
  763. [   32.962991] ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072,
  764. [   32.970425] idx 5 req 7  num_units 1 num_unit_info 0 unit size 6144 actual units 1
  765. [   32.978228] ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144,
  766. [   32.985505] idx 6 req 5  num_units 0 num_unit_info 2 unit size 2052 actual units 278
  767. [   32.993841] ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 278 unit_len 2052,
  768. [   33.000977] Support not added yet for Service 91
  769. [   33.005576] Support not added yet for Service 92
  770. [   33.010174] No EXT_MSG send INIT now
  771. [   33.013721] chunk 0 len 13568 requested , ptr  0x8c5e4000
  772. [   33.019128] chunk 1 len 54272 requested , ptr  0x8a8d0000
  773. [   33.024477] chunk 2 len 217088 requested , ptr  0x8a940000
  774. [   33.029979] chunk 3 len 206832 requested , ptr  0x8a980000
  775. [   33.035413] chunk 4 len 107520 requested , ptr  0x8a9c0000
  776. [   33.040914] chunk 5 len 6144 requested , ptr  0x8d658000
  777. [   33.046177] chunk 6 len 570456 requested , ptr  0x8aa00000
  778. [   33.051676] chunk 7 len 0 requested , ptr  0x87500000
  779. [   33.056813] Set  btcoex_enable:0
  780. [   33.059998] ol_ath_service_ready_event[4263] WAPI MBSSID 2
  781. [   33.065712] smart_log_init: Smart logging Enabled buf=caa90000 (size=65536)
  782. [   33.098633] Version = 16777216 3  status = 0
  783. [   33.101938] ol_ath_connect_htc() WMI is ready
  784. [   33.106311] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
  785. [   33.116108] target uses HTT version 2.2; host uses 2.2
  786. [   33.127724] ol_ath_attach() connect HTC.
  787. [   33.130766] bypasswmi : 0
  788. [   33.133317] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMod.
  789. [   33.145110] ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
  790. [   33.151912] ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
  791. [   33.158706] ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
  792. [   33.165428] ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
  793. [   33.172336] ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
  794. [   33.179510] ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
  795. [   33.186695] ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
  796. [   33.194005] ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
  797. [   33.201391] ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
  798. [   33.208763] ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
  799. [   33.216121] ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
  800. [   33.223604] ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
  801. [   33.231158] ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
  802. [   33.239075] OL Resmgr Init-ed
  803. [   33.241825] ieee80211_bsteering_attach: Band steering initialized
  804. [   33.247812] acfg_attach: 3013: Netlink socket created:cecc1100
  805. [   33.253577] SPECTRAL : get_capability not registered
  806. [   33.258504] HAL_CAP_PHYDIAG : Capable
  807. [   33.262130] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  808. [   33.270218] SPECTRAL : get_capability not registered
  809. [   33.275145] HAL_CAP_RADAR   : Capable
  810. [   33.278811] SPECTRAL : Need to fix the capablity check for SPECTRAL
  811. [   33.278811]  (spectral_attach : 242)
  812. [   33.288620] SPECTRAL : get_capability not registered
  813. [   33.293549] HAL_CAP_SPECTRAL_SCAN : Capable
  814. [   33.297716] SPECTRAL : get_tsf64 not registered
  815. [   33.302286] spectral_init_netlink 78 NULL SKB
  816. [   33.306584] Green-AP : Green-AP : Attached
  817. [   33.306584]
  818. [   33.312146] Green-AP : Attached
  819. [   33.315252] rate power table override is only supported for AR98XX
  820. [   33.321550] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
  821. [   33.328708] ol_if_dfs_attach: called; ptr=caaa198c, radar_info=cc661c10
  822. [   33.335217] dfs_attach: event log enabled by default
  823. [   33.343655] >>>> CB Set   (null)
  824. [   33.346174] ipq4019_wifi_led_init: Wifi LED init failed.. Couldn't get led gpio/led source
  825. [   33.354216] ol_ath_attach() UMAC attach .
  826. [   33.358277]
  827. [   33.358277]  BURSTING enabled by default
  828. [   33.363792] ol_ath_attach: Set global_ic[1] ..ptr:bf727078
  829. [   33.369201]  *skip LOWI socket init, save id22 for ALD*  
  830. [   33.374580] osif_wrap_attach:444 osif wrap attached
  831. [   33.379454] osif_wrap_devt_init:405 osif wrap dev table init done
  832. [   33.385435]  Wrap Attached: Wrap_com =cdbac6c0 ic->ic_wrap_com=cdbac6c0 &wrap_com->wc_devt=cdbac6c0
  833. [   33.394569] __ol_ath_attach: needed_headroom reservation 60
  834. [   33.400199] ipaccount: ifname [wifi0] event[16]
  835. [   33.410175] ipaccount: ifname [wifi0] event[5]
  836. [   33.414347] ol_ath_thermal_mitigation_attach: --
  837. [   33.418259] ol_ath_ahb_probe num_radios=0, wifi_radios[0].sc = cc5804c0 wifi_radio_type = 2
  838. [   33.426600] ath_sysfs_diag_init: diag_fsattr
  839. [   33.457481] qca_napi_create: napi instance 32 created on pipe 4
  840. [   33.462590]
  841. [   33.462590] __ol_ath_attach() Allocated scn cabc04c0
  842. [   33.468896] __ol_ath_attach: dev name wifi1
  843. [   33.472975] ol_ath_attach interface_id 1
  844. [   33.477185] ol_target_init() BMI inited.
  845. [   33.480939] ol_target_init() BMI Get Target Info.
  846. [   33.485465] Chip id: 0xb, chip version: 0x1000000
  847. [   33.490216]
  848. [   33.490216]  CE WAR Disabled
  849. [   33.494728] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  850. [   33.500321] ol_target_init() configure Target .
  851. [   33.504514]
  852. [   33.504514]  Target Version is 1000000
  853. [   33.511454]
  854. [   33.511454]  Flash Download Address  c0000
  855. [   33.516190] ol_transfer_bin_file: flash data file defined
  856. [   33.521600] ol_transfer_bin_file[3780] Get Caldata for wifi1.
  857. [   33.527416] qc98xx_verify_checksum: flash checksum passed: 0x1761
  858. [   33.533412] ol_transfer_bin_file 3841: Download Flash data len 12064
  859. [   33.540111] Board extended Data download address: 0x0
  860. [   33.569587]
  861. [   33.569587]  Board data initialized
  862. [   33.573602] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
  863. [   33.581173]
  864. [   33.581173]  Selecting  OTP binary for CHIP Version -1064640892
  865. [   33.588734] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  866. [   33.595953] ol_transfer_bin_file 3661: downloading file 0, Download data len 4676
  867. [   33.619927]
  868. [   33.619927]  First OTP send param 8000
  869. [   33.628826] ol_ath_download_firmware :First OTP download and Execute is good address:0x5400 return param 4660
  870. [   33.637716] ol_ath_download_firmware:##Board Id 21 , CHIP Id 0
  871. [   33.643690] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
  872. [   33.650524]
  873. [   33.650524]  wifi1: Selecting board data file name boardData_1_0_IPQ4019_DK04_5G.bin
  874. [   33.659712] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_DK0n
  875. [   33.681569] [wifi0] FWLOG: [36727] WAL_DBGID_RST_STATS ( 0x1, 0x1, 0x96c, 0x0 )
  876. [   33.687879] [wifi0] [   33.687971] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  877. [   33.688003] ol_transfer_bin_file 3661: downloading file 3, Download data len 12064
  878.  
  879. [   33.704939] FWLOG: [36766] WAL_DBGID_TX_AC_BUFFER_SET ( [   33.704947] Board extended Data download address: 0x0
  880. [   33.715269] 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  881. [   33.719291] [wifi0] FWLOG: [36766] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  882. [   33.727989] [wifi0] FWLOG: [36766] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  883. [   33.736653] [wifi0] FWLOG: [36766] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  884. [   33.745335] [wifi0] FWLOG: [36913] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0xa10, 0x160, 0x0, 0x12 )
  885. [   33.753902] [wifi0] FWLOG: [36913] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0x0, 0x12, [   33.760981] ol_ath_download_firmware: Usingt
  886. [   33.760986]
  887. [   33.760986]  Selecting  OTP binary for CHIP Version -1064640892
  888. [   33.761231] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  889. [   33.761243] ol_transfer_bin_file 3661: downloading file 0, Download data len 4676
  890.  
  891. [   33.790512] 0x10, 0x12 )
  892. [   33.807944]
  893. [   33.807944]  [Flash] : Ignore Module param
  894. [   33.812496]
  895. [   33.812496]  Second otp download Param 10000
  896. [   33.828863] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  897. [   33.836103]
  898. [   33.836103]  Mission mode: Firmware CHIP Version -1064640892
  899. [   33.843868] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  900. [   33.851048] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
  901. [   33.858864] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  902. [   33.865719] ol_swap_wlan_memory_expansion: length:185211 size_left:185231 dma_size_left:262144 fw_temp:d2dfd004 fw_entry_size:5
  903. [   33.877621] ol_swap_wlan_memory_expansion: dma_virt_addr :d2dbc000 fw_temp: d2dfd008 length: 185211
  904. [   33.886889] Swap: bytes_left to copy: fw:16; dma_page:76933
  905. [   33.892264] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:76933 fw_temp:d2e2a387 fw_entry_size:185235
  906. [   33.903225] Swap: wrong length read:0
  907. [   33.906850] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 185211 Target address 4183f0
  908. [   33.915900] scn=cabc04c0  target_write_addr=4183f0 seg_info=cd4b7b90
  909. [   33.922150] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
  910. [   33.930908] bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
  911. [   33.941098] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
  912. [   33.949933] ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
  913. [   33.956434] ol_transfer_bin_file 3661: downloading file 1, Download data len 379472
  914. [   35.222542] ol_target_init() Download FW done.
  915. [   35.226154]
  916. [   35.226154] ol_ath_copy_tgt_iram() iram read paddr: 0x980000 host paddr 0x87700000 Radio id 1
  917. [   35.401570] ol_ath_attach() WMI attached. wmi_handle cac4c080
  918. [   35.406387] wmi_unified_register_event_handler: Event id 62 is unavailable
  919. [   35.413262] htc_create: 34 callbacks suppressed
  920. [   35.417829] +htc_create ..  HIF :cab70000
  921. [   35.421968] -htc_create: (0xcd7a0840)
  922. [   35.425382] htc_wmi_init() HT Create . cd7a0840
  923. [   35.430032] htc_wmi_init 7768 host_enable 0 nss_nwifi_offload 0
  924. [   35.435809] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  925. [   35.445196]  OL_ACBKMinfree : 0
  926. [   35.448316]  OL_ACBEMinfree : 0
  927. [   35.451428]  OL_ACVIMinfree : 0
  928. [   35.454551]  OL_ACVOMinfree : 0
  929. [   35.457679] hif_enable_fastpath, Enabling fastpath mode
  930. [   35.462884] +HWT
  931. [   35.464711] hif_completion_thread_startup: pipe_num:0 pipe_info:0xcab74578
  932. [   35.471572] hif_completion_thread_startup: pipe_num:3 pipe_info:0xcab74650
  933. [   35.478421] hif_completion_thread_startup: pipe_num:4 pipe_info:0xcab74698
  934. [   35.528598] -HWT
  935. [   35.529481] Startup Mode-0 set
  936. [   35.532454]
  937. [   35.532454] <=== cfg max peer id 1056 ====>
  938. [   35.540080] htt_peer_map_timer_init Enter pdev ca3b8000 hrtimer ca3bc948
  939. [   35.545771]
  940. [   35.545771]  htt_alloc_peer_map_mem : Alloc Success : host q vaddr c9c48000 paddr 89c48000
  941. [   35.555510]
  942. [   35.555510]  htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  943. [   35.598126] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from c98e0000
  944. [   35.607158] Firmware_Build_Number:50
  945. [   35.609841] FW wireless modes: 0x1f9001
  946. [   35.613621] num_rf_chain:0x00000002  ht_cap_info:0x0000085b  vht_cap_info:0x339959b2  vht_supp_mcs:0x0000fffa
  947. [   35.623846] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0
  948. [   35.632686]
  949. [   35.632686] Sending Ext resource cfg: HOST PLATFORM as 0
  950. [   35.632686] fw_feature_bitmap as 50 to TGT
  951. [   35.642772] ol_ath_service_ready_event: tt_support: 1
  952. [   35.647631] ol_ath_service_ready_event: periodic_chan_stats: 1
  953. [   35.653465] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
  954. [   35.659801] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
  955. [   35.669259] Ext stats enabled. num_peers 277, num_vdevs 17, num_tids 104
  956. [   35.676004] EXT NSS Supported
  957. [   35.678919] idx 1 req 2  num_units 1 num_unit_info 12 unit size 256 actual units 53
  958. [   35.686657] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
  959. [   35.694088] idx 2 req 3  num_units 1 num_unit_info 12 unit size 1024 actual units 53
  960. [   35.701978] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
  961. [   35.709462] idx 3 req 4  num_units 1 num_unit_info 12 unit size 4096 actual units 53
  962. [   35.717434] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
  963. [   35.724819] idx 0 req 1  num_units 0 num_unit_info 2 unit size 744 actual units 278
  964. [   35.732724] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 278 unit_len 744,
  965. [   35.740097] idx 4 req 6  num_units 35 num_unit_info 0 unit size 3072 actual units 35
  966. [   35.748132] ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072,
  967. [   35.755445] idx 5 req 7  num_units 1 num_unit_info 0 unit size 6144 actual units 1
  968. [   35.763136] ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144,
  969. [   35.770568] idx 6 req 5  num_units 0 num_unit_info 2 unit size 2052 actual units 278
  970. [   35.778855] ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 278 unit_len 2052,
  971. [   35.785995] Support not added yet for Service 91
  972. [   35.790615] Support not added yet for Service 92
  973. [   35.795195] No EXT_MSG send INIT now
  974. [   35.798777] chunk 0 len 13568 requested , ptr  0x8aab8000
  975. [   35.804139] chunk 1 len 54272 requested , ptr  0x898d0000
  976. [   35.809532] chunk 2 len 217088 requested , ptr  0x89940000
  977. [   35.814989] chunk 3 len 206832 requested , ptr  0x89980000
  978. [   35.820472] chunk 4 len 107520 requested , ptr  0x899c0000
  979. [   35.825926] chunk 5 len 6144 requested , ptr  0x8c5e2000
  980. [   35.831241] chunk 6 len 570456 requested , ptr  0x89a00000
  981. [   35.836690] chunk 7 len 0 requested , ptr  0x87700000
  982. [   35.841832] ol_ath_service_ready_event[4263] WAPI MBSSID 2
  983. [   35.847477] smart_log_init: Smart logging Enabled buf=c9a90000 (size=65536)
  984. [   35.883583] Version = 16777216 3  status = 0
  985. [   35.886881] ol_ath_connect_htc() WMI is ready
  986. [   35.891235] target uses HTT version 2.2; host uses 2.2
  987. [   35.896300] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
  988. [   35.912709] ol_ath_attach() connect HTC.
  989. [   35.915695] bypasswmi : 0
  990. [   35.918361] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMod.
  991. [   35.930061] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
  992. [   35.937075] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
  993. [   35.943924] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
  994. [   35.950781] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
  995. [   35.957702] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
  996. [   35.964785] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
  997. [   35.972048] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
  998. [   35.979424] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
  999. [   35.986888] Add VHT80 channel: 5210
  1000. [   35.990284] Add VHT80 channel: 5290
  1001. [   35.993727] Add VHT80 channel: 5530
  1002. [   35.997194] Add VHT80 channel: 5610
  1003. [   36.000691] Add VHT80 channel: 5690
  1004. [   36.004142] Add VHT80 channel: 5775
  1005. [   36.007641] Skipping VHT80 channel 5825
  1006. [   36.011461] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
  1007. [   36.019182] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
  1008. [   36.028047] freq=58
  1009. [   36.029196] freq=106
  1010. [   36.031451] freq=122
  1011. [   36.033707] freq=138
  1012. [   36.036108] OL Resmgr Init-ed
  1013. [   36.039151] ieee80211_bsteering_attach: Band steering initialized
  1014. [   36.045019] acfg_attach: Offload using existing sock cecc1100
  1015. [   36.050805] SPECTRAL : get_capability not registered
  1016. [   36.055672] HAL_CAP_PHYDIAG : Capable
  1017. [   36.059345] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  1018. [   36.067391] SPECTRAL : get_capability not registered
  1019. [   36.072363] HAL_CAP_RADAR   : Capable
  1020. [   36.075988] SPECTRAL : Need to fix the capablity check for SPECTRAL
  1021. [   36.075988]  (spectral_attach : 242)
  1022. [   36.085814] SPECTRAL : get_capability not registered
  1023. [   36.090761] HAL_CAP_SPECTRAL_SCAN : Capable
  1024. [   36.094909] SPECTRAL : get_tsf64 not registered
  1025. [   36.099445] spectral_init_netlink 78 NULL SKB
  1026. [   36.103784] Green-AP : Green-AP : Attached
  1027. [   36.103784]
  1028. [   36.109338] Green-AP : Attached
  1029. [   36.112443] rate power table override is only supported for AR98XX
  1030. [   36.118740] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
  1031. [   36.125869] ol_if_dfs_attach: called; ptr=c99b998c, radar_info=cc661c10
  1032. [   36.132435] dfs_attach: event log enabled by default
  1033. [   36.140824] >>>> CB Set   (null)
  1034. [   36.143795] ipq4019_wifi_led_init: Wifi LED init failed.. Couldn't get led gpio/led source
  1035. [   36.151380] ol_ath_attach() UMAC attach .
  1036. [   36.155428]
  1037. [   36.155428]  BURSTING enabled by default
  1038. [   36.160994] ol_ath_attach: Set global_ic[2] ..ptr:bf727078
  1039. [   36.166286]  *skip LOWI socket init, save id22 for ALD*  
  1040. [   36.171706] osif_wrap_attach:444 osif wrap attached
  1041. [   36.176600] osif_wrap_devt_init:405 osif wrap dev table init done
  1042. [   36.182650]  Wrap Attached: Wrap_com =cdb36ac0 ic->ic_wrap_com=cdb36ac0 &wrap_com->wc_devt=cdb36ac0
  1043. [   36.191737] __ol_ath_attach: needed_headroom reservation 60
  1044. [   36.197355] ipaccount: ifname [wifi1] event[16]
  1045. [   36.206644] ipaccount: ifname [wifi1] event[5]
  1046. [   36.210900] ol_ath_thermal_mitigation_attach: --
  1047. [   36.214676] ol_ath_ahb_probe num_radios=1, wifi_radios[1].sc = cabc04c0 wifi_radio_type = 2
  1048. [   36.223145] ath_sysfs_diag_init: diag_fsattr
  1049. [   36.228408] ath_ol_pci:  (Atheros/multi-bss)
  1050. [   36.306797]  pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
  1051. [   36.313079] +hif_update_pipe_callback pipeid 8
  1052. [   36.317418]
  1053. [   36.318956] -hif_update_pipe_callback
  1054. [   36.322541]
  1055. [   36.324210]  pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
  1056. [   36.331312] +hif_update_pipe_callback pipeid 8
  1057. [   36.335648]
  1058. [   36.337127] -hif_update_pipe_callback
  1059. [   36.340829]
  1060. [   36.407076] __sa_init_module
  1061. No Direct-Attach chipsets found.
  1062. [   36.438032] Removing athdebug proc file
  1063. [   36.438983] [wifi1] FWLOG: [39581] WAL_DBGID_RST_STATS ( 0x1, 0x1, 0x1464, 0x0 )
  1064. [   36.439002] [wifi1] FWLOG: [39620] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  1065. [   36.439020] [wifi1] FWLOG: [39620] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  1066. [   36.439038] [wifi1] FWLOG: [39620] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  1067. [   36.439056] [wifi1] FWLOG: [39620] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  1068. [   36.439074] [wifi1] FWLOG: [39771] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0xa10, 0x160, 0x10, 0x0 )
  1069. [   36.439092] [wifi1] FWLOG: [39771] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0x10, 0x0, 0x10, 0x12 )
  1070. [   36.499984] ath_dev: driver unloaded
  1071. [   36.511882] ath_tx99: driver unloaded
  1072. [   36.522739] ath_rate_atheros: driver unloaded
  1073. [   36.534371] ath_hal: driver unloaded
  1074. [   36.583995] [ol_ath_iw_setcountry][1852] *p=43, *(p+1)=4e
  1075. [   36.588626] isCountryCodeValid: EEPROM regdomain 0x0
  1076. [   36.593330] ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
  1077. [   36.600203] ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
  1078. [   36.606977] ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
  1079. [   36.613797] ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
  1080. [   36.620634] ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
  1081. [   36.627847] ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
  1082. [   36.634981] ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
  1083. [   36.642294] ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
  1084. [   36.649672] ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
  1085. [   36.657029] ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
  1086. [   36.664435] ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
  1087. [   36.671894] ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
  1088. [   36.679443] ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
  1089. [   36.706852] cfg valid value inside module enable 1wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000001 cfgvali0
  1090. [   36.726259] cfg valid value inside module enable 2wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000002 cfgvali0
  1091. [   36.745659] cfg valid value inside module enable 4wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000004 cfgvali0
  1092. [   36.765036] cfg valid value inside module enable 8wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000008 cfgvali0
  1093. [   36.784402] cfg valid value inside module enable 10wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000010 cfgval0
  1094. [   36.803880] cfg valid value inside module enable 20wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000020 cfgval0
  1095. [   36.823579] cfg valid value inside module enable 40wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000040 cfgval0
  1096. [   36.843286] cfg valid value inside module enable 80wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000080 cfgval0
  1097. [   36.863009] cfg valid value inside module enable 100wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000100 cfgva0
  1098. [   36.882845] cfg valid value inside module enable 200wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000200 cfgva0
  1099. [   36.902588] cfg valid value inside module enable 400wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000400 cfgva0
  1100. [   36.922303] cfg valid value inside module enable 800wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000800 cfgva0
  1101. [   36.942050] cfg valid value inside module enable 1000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00001000 cfgv0
  1102. [   36.961917] cfg valid value inside module enable 2000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00002000 cfgv0
  1103. [   36.981767] cfg valid value inside module enable 4000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00004000 cfgv0
  1104. [   37.001640] cfg valid value inside module enable 8000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00008000 cfgv0
  1105. [   37.021459] cfg valid value inside module enable 10000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00010000 cfg0
  1106. [   37.041404] cfg valid value inside module enable 20000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00020000 cfg0
  1107. [   37.061316] cfg valid value inside module enable 40000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00040000 cfg0
  1108. [   37.081245] cfg valid value inside module enable 80000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00080000 cfg0
  1109. [   37.101227] cfg valid value inside module enable 100000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00100000 cf0
  1110. [   37.121246] cfg valid value inside module enable 200000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00200000 cf0
  1111. [   37.141251] cfg valid value inside module enable 400000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00400000 cf0
  1112. [   37.161270] cfg valid value inside module enable 800000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00800000 cf0
  1113. [   37.181271] cfg valid value inside module enable 1000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 01000000 c0
  1114. [   37.201337] cfg valid value inside module enable 2000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 02000000 c0
  1115. [   37.221448] cfg valid value inside module enable 4000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 04000000 c0
  1116. [   37.241556] cfg valid value inside module enable 8000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 08000000 c0
  1117. [   37.261642] cfg valid value inside module enable 10000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 10000000 0
  1118. [   37.281863] cfg valid value inside module enable 20000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 20000000 0
  1119. [   37.302051] cfg valid value inside module enable 40000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 40000000 0
  1120. [   37.322212] cfg valid value inside module enable 80000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 80000000 0
  1121. [   37.342351] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1122. [   37.361916] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1123. [   37.381567] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1124. [   37.401106] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1125. [   37.421781] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1126. [   37.441427] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1127. [   37.460999] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1128. [   37.480575] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1129. [   37.574117] set TXBF_SND_PERIOD: value 100 wmi_status 0
  1130. [   37.609820]  Disconnect_timeout value entered:10
  1131. [   37.620829]  reconfiguration_timeout value entered:60
  1132. [   37.674553] [wifi0] FWLOG: [40446] WAL_DBGID_PDEV_INFO_PRINT ( 0x57, 0x199, 0x1180, 0x0, 0x32 )
  1133. [   37.864075] wlan_vap_create : enter. devhandle=0xcc5804c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
  1134. [   37.871822] send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 50:d2:f5:15:65:24:
  1135. [   37.881138] ieee80211_mbo_vattach:MBO Initialized
  1136. [   37.885642] ieee80211_oce_vattach: OCE Initialized
  1137. [   37.890852] wlan_vap_create : exit. devhandle=0xcc5804c0, vap=0xcab80000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  1138. [   37.900594] __ieee80211_smart_ant_init: Smart Antenna is not supported
  1139. [   37.907183] Enabling TX checksum bit for the vap wl1 features 4000
  1140. [   37.913456] Enabling SG bit for the vap wl1 features 4000
  1141. [   37.918901] Enabling SG bit for the vap wl1 features 4000
  1142. [   37.924351] Enabling TSO bit for the vap wl1 features 4000
  1143. [   37.929922] Enabling LRO bit for the vap wl1 features 4000
  1144. [   37.935850] ipaccount: ifname [wl1] event[16]
  1145. [   37.942788] ipaccount: ifname [wl1] event[5]
  1146. [   37.946284] VAP device wl1 created osifp: (cd7a25c0) os_if: (cab80000)
  1147. [   37.967974] siwfreq
  1148. [   37.969055] Set freq vap 0 stop send + cab80000
  1149. [   37.973969] Set freq vap 0 stop send -cab80000
  1150. [   38.007803] Set wait done --cab80000
  1151. [   38.106221] Setting Max Stations:124
  1152. [   38.124917] [DEBUG] vap-0(wl1):set SIOC80211NWID, 10 characters
  1153. [   38.129953]  
  1154. [   38.129953]  DES SSID SET=staWIFI-2g
  1155. [   38.188523] su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
  1156. [   38.717815]  ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
  1157. [   38.758555]  DEVICE IS DOWN ifname=wl1
  1158. [   38.761408]  DEVICE IS DOWN ifname=wl1
  1159. [   38.918766] ipaccount: ifname [wl1] event[13]
  1160. [   38.922140] ipaccount: ifname [wifi0] event[13]
  1161. [   38.927143] ipaccount: ifname [wifi0] event[1]
  1162. [   38.958399] Sending SCAN START cmd
  1163. [   38.961502] 8021q: adding VLAN 0 to HW filter on device wl1
  1164. [   38.966604] ipaccount: ifname [wl1] event[1]
  1165. [   39.269725] ipaccount: ifname [wl1] event[20]
  1166. [   39.273056] device wl1 entered promiscuous mode
  1167. [   39.279101] ipaccount: ifname [wl1] event[21]
  1168. [   39.282494] br-lan: port 4(wl1) entered forwarding state
  1169. [   39.287809] br-lan: port 4(wl1) entered forwarding state
  1170. [   39.293408] ipaccount: ifname [wl1] event[24]
  1171. qcawifi: enable radio wifi1
  1172. [   39.886458] [ol_ath_iw_setcountry][1852] *p=43, *(p+1)=4e
  1173. [   39.890924] isCountryCodeValid: EEPROM regdomain 0x0
  1174. [   39.895795] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
  1175. [   39.902977] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
  1176. [   39.909717] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
  1177. [   39.916524] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
  1178. [   39.923647] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
  1179. [   39.930550] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
  1180. [   39.937848] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
  1181. [   39.945170] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
  1182. [   39.952652] Add VHT80 channel: 5210
  1183. [   39.956020] Add VHT80 channel: 5290
  1184. [   39.959562] Add VHT80 channel: 5775
  1185. [   39.962981] Skipping VHT80 channel 5825
  1186. [   39.966787] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
  1187. [   39.974536] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
  1188. [   39.983118] freq=58
  1189. [   39.999159] cfg valid value inside module enable 1wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000001 cfgvali0
  1190. [   40.019480] cfg valid value inside module enable 2wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000002 cfgvali0
  1191. [   40.038920] cfg valid value inside module enable 4wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000004 cfgvali0
  1192. [   40.058478] cfg valid value inside module enable 8wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000008 cfgvali0
  1193. [   40.078040] cfg valid value inside module enable 10wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000010 cfgval0
  1194. [   40.097714] cfg valid value inside module enable 20wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000020 cfgval0
  1195. [   40.117312] cfg valid value inside module enable 40wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000040 cfgval0
  1196. [   40.137039] cfg valid value inside module enable 80wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000080 cfgval0
  1197. [   40.156587] cfg valid value inside module enable 100wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000100 cfgva0
  1198. [   40.176456] cfg valid value inside module enable 200wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000200 cfgva0
  1199. [   40.196037] cfg valid value inside module enable 400wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000400 cfgva0
  1200. [   40.215894] cfg valid value inside module enable 800wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000800 cfgva0
  1201. [   40.235541] cfg valid value inside module enable 1000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00001000 cfgv0
  1202. [   40.255471] cfg valid value inside module enable 2000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00002000 cfgv0
  1203. [   40.275273] cfg valid value inside module enable 4000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00004000 cfgv0
  1204. [   40.295239] cfg valid value inside module enable 8000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00008000 cfgv0
  1205. [   40.314947] cfg valid value inside module enable 10000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00010000 cfg0
  1206. [   40.334991] cfg valid value inside module enable 20000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00020000 cfg0
  1207. [   40.354779] cfg valid value inside module enable 40000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00040000 cfg0
  1208. [   40.374789] cfg valid value inside module enable 80000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00080000 cfg0
  1209. [   40.394587] cfg valid value inside module enable 100000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00100000 cf0
  1210. [   40.415775] cfg valid value inside module enable 200000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00200000 cf0
  1211. [   40.435669] cfg valid value inside module enable 400000
  1212. [   40.439813] [wifi1] FWLOG: [43823] WAL_DBGID_PDEV_INFO_PRINT ( 0x57, 0x199, 0x1180, 0x10, [   40.447822] wmi_dbg_cfg_send: mod0
  1213. [   40.454557] cfg valid value inside module enable 800000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00800000 cf0
  1214. [   40.461317] cfg valid value inside module enable 1000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 01000000 c0
  1215. [   40.468056] cfg valid value inside module enable 2000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 02000000 c0
  1216. [   40.474695] cfg valid value inside module enable 4000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 04000000 c0
  1217. [   40.481408] cfg valid value inside module enable 8000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 08000000 c0
  1218. [   40.488148] cfg valid value inside module enable 10000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 10000000 0
  1219. [   40.494799] cfg valid value inside module enable 20000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 20000000 0
  1220. [   40.501823] cfg valid value inside module enable 40000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 40000000 0
  1221. [   40.508561] cfg valid value inside module enable 80000000wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 80000000 0
  1222. [   40.515221] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1223. [   40.521915] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1224. [   40.528696] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1225. [   40.535367] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1226. [   40.542084] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1227. [   40.548866] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1228. [   40.555506] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1229. [   40.562259] cfg valid value inside module enable 0wmi_dbg_cfg_send: mod[0]00000000 dbgcfg00000000 cfgvalid[0] 00000000 cfgvali0
  1230. [   40.632978] set TXBF_SND_PERIOD: value 100 wmi_status 0
  1231. [   40.662117]  Disconnect_timeout value entered:10
  1232. [   40.669115]  reconfiguration_timeout value entered:60
  1233.  
  1234. [   40.713406] 0x0 )
  1235. [   40.715121] [wifi1] FWLOG: [43823] WAL_DBGID_PDEV_INFO_PRINT ( 0x57, 0x10, 0x0, 0x10, 0x0 )
  1236. [   40.858905] wlan_vap_create : enter. devhandle=0xcabc04c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
  1237. [   40.866666] send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 50:d2:f5:15:65:25:
  1238. [   40.877164] ieee80211_mbo_vattach:MBO Initialized
  1239. [   40.881673] ieee80211_oce_vattach: OCE Initialized
  1240. [   40.886205] wlan_vap_create : exit. devhandle=0xcabc04c0, vap=0xc9bc0000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
  1241. [   40.896858] __ieee80211_smart_ant_init: Smart Antenna is not supported
  1242. [   40.902555] Enabling TX checksum bit for the vap wl0 features 4000
  1243. [   40.908757] Enabling SG bit for the vap wl0 features 4000
  1244. [   40.914172] Enabling SG bit for the vap wl0 features 4000
  1245. [   40.919681] Enabling TSO bit for the vap wl0 features 4000
  1246. [   40.925197] Enabling LRO bit for the vap wl0 features 4000
  1247. [   40.931297] ipaccount: ifname [wl0] event[16]
  1248. [   40.940735] ipaccount: ifname [wl0] event[5]
  1249. [   40.944294] VAP device wl0 created osifp: (cd77c6c0) os_if: (c9bc0000)
  1250. [   40.972691] siwfreq
  1251. [   40.973775] Set freq vap 0 stop send + c9bc0000
  1252. [   40.978772] Set freq vap 0 stop send -c9bc0000
  1253. [   41.007880] Set wait done --c9bc0000
  1254. [   41.108714] Setting Max Stations:124
  1255. [   41.126820] [DEBUG] vap-0(wl0):set SIOC80211NWID, 10 characters
  1256. [   41.131773]  
  1257. [   41.131773]  DES SSID SET=staWIFI-2g
  1258. [   41.191046] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
  1259. [   41.206597] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
  1260. [   41.221041] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
  1261. [   41.234088] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
  1262. [   41.240247] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
  1263. [   41.261760] ieee80211_dfs_override_cac_timeout: CAC timeout is now overridden (0)
  1264. [   41.287783] br-lan: port 4(wl1) entered forwarding state
  1265. [   41.787852]  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
  1266. [   41.818392]  DEVICE IS DOWN ifname=wl0
  1267. [   41.821214]  DEVICE IS DOWN ifname=wl0
  1268. [   41.968771] ipaccount: ifname [wl0] event[13]
  1269. [   41.972162] ipaccount: ifname [wifi1] event[13]
  1270. [   41.977118] ipaccount: ifname [wifi1] event[1]
  1271. [   42.007985] OL vap_start +
  1272. [   42.009683] VDEV START
  1273. [   42.012030] OL vap_start -
  1274. [   42.197149] ol_vdev_start_resp_ev for vap 0 (cac4c080)
  1275. [   42.201293] send_wmm_update_cmd_non_tlv:
  1276. [   42.205242] !@#osif_channel_change, vap wl0, channel 149
  1277. [   42.210565] !@#---osif_channel_change,before wlan_scan_in_progress vap wl0, channel 149
  1278. [   42.218649] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
  1279. [   42.225514] send_vdev_up_cmd_non_tlv for vap 0
  1280. [   42.229972] Beacon mode set to staggered. Cannot enable FD
  1281. [   42.235379] __ieee80211_smart_ant_init: Smart Antenna is not supported
  1282. [   42.247845] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
  1283. [   42.257712] 8021q: adding VLAN 0 to HW filter on device wl0
  1284. [   42.262668] ipaccount: ifname [wl0] event[1]
  1285. [   42.566517] ipaccount: ifname [wl0] event[20]
  1286. [   42.569934] device wl0 entered promiscuous mode
  1287. [   42.575977] ipaccount: ifname [wl0] event[21]
  1288. [   42.579414] br-lan: port 5(wl0) entered forwarding state
  1289. [   42.584679] br-lan: port 5(wl0) entered forwarding state
  1290. [   42.590609] ipaccount: ifname [wl0] event[24]
  1291. [   42.947974] send_vdev_down_cmd_non_tlv for vap 0
  1292. [   42.952003] OL vap_start +
  1293. [   42.954285] VDEV START
  1294. [   42.956611] OL vap_start -
  1295. [   42.959382] ol_ath_vap_set_param: Now supported MGMT RATE is 1000(kbps) and rate code: 0x43
  1296. lbd: not enable
  1297. [   43.166653] ol_vdev_start_resp_ev for vap 0 (cdbe0000)
  1298. [   43.170818] send_wmm_update_cmd_non_tlv:
  1299. [   43.174766] !@#osif_channel_change, vap wl1, channel 6
  1300. [   43.179969] !@#---osif_channel_change,before wlan_scan_in_progress vap wl1, channel 6
  1301. [   43.187857] su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
  1302. [   43.194712] send_vdev_up_cmd_non_tlv for vap 0
  1303. [   43.199179] Beacon mode set to staggered. Cannot enable FD
  1304. [   43.204553] __ieee80211_smart_ant_init: Smart Antenna is not supported
  1305. iface_mgr: ifacemgr_load_conf_file: 282: No STA VAPs are configured
  1306. iface_mgr: ifacemgr_load_conf_file: 287: num_sta_vaps:0 num_plc_ifaces:1
  1307. wpa_supplicant-netlink, NETLINK_ROUTE init ok!
  1308.  
  1309. 50:d2:f5:15:65:24
  1310. 50:d2:f5:15:65:25
  1311. iface_mgr: ifacemgr_display_updated_config: 809: Mode:3 timeout:0
  1312. PLC iface list: eth3
  1313. [   43.487421] ipaccount: ifname [eth1] event[9]
  1314. [   43.491768] br-lan: port 1(eth1) entered disabled state
  1315. [   43.496570] ipaccount: ifname [eth1] event[2]
  1316. [   43.506515] ipaccount: ifname [eth2] event[9]
  1317. [   43.510748] br-lan: port 2(eth2) entered disabled state
  1318. [   43.515721] ipaccount: ifname [eth2] event[2]
  1319. [   44.577767] br-lan: port 5(wl0) entered forwarding state
  1320. [   44.773846] wifi_log: [Class 1 - RECV AUTH] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="recv-a"
  1321. [   44.790724] wifi_log: [Class 1 - SEND AUTH] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="mlme-a"
  1322. [   44.806113] wifi_log: [Class 2 - RECV ASSOC] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="recv-"
  1323. [   44.819691] wifi_log: [Class 2 - SEND ASSOC RSP] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="m"
  1324. [   44.856719] wifi_log: [Class 2 - SEND DISASSOC] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="se"
  1325. [   46.540909] ipaccount: ifname [eth1] event[13]
  1326. [   46.546064] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  1327. [   46.552410] ipaccount: ifname [eth1] event[1]
  1328. [   46.562214] ipaccount: ifname [eth2] event[13]
  1329. [   46.567346] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
  1330. [   46.572547] ipaccount: ifname [eth2] event[1]
  1331. rcS S calling: /etc/rc.d/S20network boot: WARNING: EXITCODE=0, execute too slow, 25 >= 15: /etc/rc.d/S20network boot
  1332. xqwhc_hyd: **ppid=3767, cmd=</bin/sh/etc/hotplug.d/net/30-hyd>
  1333. xqwhc_hyd:  *parent ppid 1, cmd=<init>
  1334. xqwhc_hyd:  stop hyd-lan daemon
  1335. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  1336. xqwhc_hyd:  stop hyd-guest daemon
  1337. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  1338. [   49.085028] ME Pool succesfully initialized vaddr - cc540000 paddr - 0
  1339. [   49.085028] num_elems = 1424 buf_size - 64 pool_size = 102528
  1340. [   49.097162] Enable MCAST_TO_UCAST
  1341. [   49.106986] ME Pool succesfully initialized vaddr - cb820000 paddr - 0
  1342. [   49.106986] num_elems = 1424 buf_size - 64 pool_size = 102528
  1343. [   49.119160] Enable MCAST_TO_UCAST
  1344. hyd: starting daemon
  1345. xqwhc_hyd: starting hyd-lan daemon
  1346. xqwhc_hyd:  run hyd-lan tmonitor ok!
  1347. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  1348. xqwhc_plchost:  stop tmonitor
  1349. [   53.079624] [wl1] Band steering events being sent to PID:4605
  1350. [   53.084459] [wl0] Band steering events being sent to PID:4605
  1351. xqwhc_plchost: starting daemon
  1352. xqwhc_plchost:  run plchost tmonitor ok!
  1353. rcS S calling: /etc/rc.d/S49wl_cal_autostart boot: logexec: exitcode 1, runt 200 /etc/rc.d/S49wl_cal_autostart boot
  1354. Thu Sep 19 10:59:38 CST 2019 boot_check[4998]: INFO: Wireless OK
  1355. xqwhc_hyd: **ppid=5164, cmd=</bin/sh/usr/sbin/runt200/etc/rc.d/S55hydboot>
  1356. xqwhc_hyd:  *parent ppid 243, cmd=</bin/sh/etc/init.d/rcSSboot>
  1357. xqwhc_hyd:  stop hyd-lan daemon
  1358. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  1359. xqwhc_hyd:  stop hyd-guest daemon
  1360. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  1361. hyd: starting daemon
  1362. xqwhc_hyd: starting hyd-lan daemon
  1363. xqwhc_hyd:  run hyd-lan tmonitor ok!
  1364. xqwhc_hyd:   iflist=wl1 wl0 eth1 eth2  eth3
  1365. lbd: not enable
  1366. rcS S calling: /etc/rc.d/S55lbd boot: logexec: exitcode 1, runt 200 /etc/rc.d/S55lbd boot
  1367. rcS S calling: /etc/rc.d/S70qca-nss-drv boot: logexec: exitcode 1, runt 200 /etc/rc.d/S70qca-nss-drv boot
  1368. [   59.314482] wifi_log: [Class 1 - RECV AUTH] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="recv-a"
  1369. [   59.332325] wifi_log: [Class 1 - SEND AUTH] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="mlme-a"
  1370. [   59.347858] wifi_log: [Class 2 - RECV ASSOC] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="recv-"
  1371. [   59.361089] wifi_log: [Class 2 - SEND ASSOC RSP] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="m"
  1372. [   59.396737] wifi_log: [Class 2 - SEND DISASSOC] - if="wl1", sta_mac="04:cf:8c:f9:8d:e4", bssid="50:d2:f5:15:65:24", action="se"
  1373. [   59.802684] [wl1] Band steering events being sent to PID:5423
  1374. [   59.807471] [wl0] Band steering events being sent to PID:5423
  1375. [   59.831876] ipaccount: refresh dev ifname to [eth1 eth2 eth3 wl0 wl1 wl14]
  1376. [   59.838118] ipaccount: landev_init_all() get dev [wl14] not found.
  1377. iface_mgr: ifacemgr_hyd_event_receive: 1096: HYD_BACK_HAUL_IFACE_PLC_UP event received, gptr->num_plc_iface_up:1
  1378. iface_mgr: ifacemgr_bringup_apvaps_start: 420: Start bringup apvaps process
  1379. iface_mgr: ifacemgr_bringup_apvaps_timer: 377: Timer ticks for bringup apvaps.
  1380. iface_mgr: ifacemgr_bringup_apvaps_timer: 404: Bringup apvaps process Finished. retry count=1, allDone=1
  1381. iface_mgr: ifacemgr_bringup_apvaps_stop: 437: Stop bringup apvaps process
  1382. xqwhc_repacd: **ppid=5905, cmd=</bin/sh/usr/sbin/runt200/etc/rc.d/S97repacdboot>
  1383. xqwhc_repacd:  *parent ppid 243, cmd=</bin/sh/etc/init.d/rcSSboot>
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!