Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version 1.20 20190314
- In
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x1
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x1
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x1
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x1
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x1
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x1
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x1
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x1
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- Channel 0: LPDDR4,800MHz
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,800MHz
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- 256B stride
- ch 0 ddrconfig = 0x101, ddrsize = 0x2020
- ch 1 ddrconfig = 0x101, ddrsize = 0x2020
- pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
- OUT
- Boot1: 2019-03-14, version: 1.19
- CPUId = 0x0
- ChipType = 0x10, 249
- SdmmcInit=2 0
- BootCapSize=100000
- UserCapSize=119276MB
- FwPartOffset=2000 , 100000
- mmc0:cmd5,20
- SdmmcInit=0 0
- BootCapSize=0
- UserCapSize=15103MB
- FwPartOffset=2000 , 0
- StorageInit ok = 69427
- SecureMode = 0
- SecureInit read PBA: 0x4
- SecureInit read PBA: 0x404
- SecureInit read PBA: 0x804
- SecureInit read PBA: 0xc04
- SecureInit read PBA: 0x1004
- SecureInit read PBA: 0x1404
- SecureInit read PBA: 0x1804
- SecureInit read PBA: 0x1c04
- SecureInit ret = 0, SecureMode = 0
- atags_set_bootdev: ret:(0)
- GPT part: 0, name: STATE, start:0x4ae000, size:0x60006d
- GPT part: 1, name: KERN-A, start:0x5000, size:0x20000
- GPT part: 2, name: ROOT-A, start:0xae000, size:0x400000
- GPT part: 3, name: KERN-B, start:0x25000, size:0x20000
- GPT part: 4, name: ROOT-B, start:0xad000, size:0x1000
- GPT part: 5, name: KERN-C, start:0x4040, size:0x1
- GPT part: 6, name: ROOT-C, start:0x4041, size:0x1
- GPT part: 7, name: OEM, start:0x45000, size:0x8000
- GPT part: 8, name: reserved, start:0x4042, size:0x1
- GPT part: 9, name: reserved, start:0x4043, size:0x1
- GPT part: 10, name: RWFW, start:0x40, size:0x4000
- GPT part: 11, name: EFI-SYSTEM, start:0x6d000, size:0x40000
- no find partition:uboot.
- LoadTrust Addr:0x4000
- No find bl30.bin
- No find bl32.bin
- Load uboot, ReadLba = 2000
- Load OK, addr=0x200000, size=0xdd07c
- RunBL31 0x10000
- NOTICE: BL31: v1.3(debug):22b599a
- NOTICE: BL31: Built : 11:03:32, Jul 10 2019
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1181): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- fdtdec_get_addr_size_fixed: reg: addr=ff770000, size=10000
- fdtdec_get_addr_size_fixed: reg: addr=ff320000, size=1000
- U-Boot 2017.09-03638-g55e8e8b-dirty (Oct 04 2019 - 15:12:04 -0400)
- Model: Pine64 RK3399 Pinebook Pro
- PreSerial: 2
- DRAM: 3.9 GiB
- Sysmem: init
- Relocation Offset is: f5bf0000
- I2c0 speed: 400000Hz
- PMIC: RK808
- vdd_center 900000 uV
- vdd_log init 900000 uV
- rk_board_init PWM2 pinctrl init fail!
- rk_board_init: vcc3v0_sdio cannot set regulator value -38
- vdd_center 900000 uV
- DCDC_REG1@ vdd_center: 750000uV <-> 1400000uV, set 900000uV, enabling | suspend -61uV, disabled
- DCDC_REG4@ vcc_1v8: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000uV, enabling
- LDO_REG1@ vcc1v8_dvp: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000uV, enabling
- LDO_REG4@ vcc_sd: 3300000uV <-> 3300000uV, set 3300000uV, enabling | suspend 3300000uV, enabling
- LDO_REG7@ vcca1v8_codec: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000uV, enabling
- LDO_REG8@ vcc_3v0: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspend 3000000uV, enabling
- SWITCH_REG2@ vcc3v3_s0: -61uV <-> -61uV, set 0uV, enabling | suspend -61uV, disabled
- dc-12v@ dc_12v: 12000000uV <-> 12000000uV, set 12000000uV, enabling | suspend -61uV, enabling (ret: -38)
- vcc-sys@ vcc_sys: 5000000uV <-> 5000000uV, set 5000000uV, enabling | suspend -61uV, enabling (ret: -38)
- vcc3v3-sys@ vcc3v3_sys: 3300000uV <-> 3300000uV, set 3300000uV, enabling | suspend -61uV, enabling (ret: -38)
- vcc-phy-regulator@ vcc_phy: -61uV <-> -61uV, set -61uV, enabling | suspend -61uV, enabling
- led-regulator@ led_regulator: -61uV <-> -61uV, set -61uV, enabling | suspend -61uV, enabling
- vcc5v0-host-en@ vcc5v0_host: 5000000uV <-> 5000000uV, set 5000000uV, enabling | suspend -61uV, enabling (ret: -38)
- vcc5v0-usb3-host-regulator@vcc5v0_usb3_host: -61uV <-> -61uV, set -61uV, enabling | suspend -61uV, enabling
- vcc5v0-typec0-en@ vcc5v0_typec0: -61uV <-> -61uV, set -61uV, enabling | suspend -61uV, enabling
- vcc1v8-sdio@ vcc1v8_sdio: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend -61uV, enabling (ret: -38)
- vcc3v0-sdio@ vcc3v0_sdio: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspend -61uV, enabling ; init 3000000uV (ret: -38)
- vdd_log init 900000 uV
- vdd_log@ vdd_log: 800000uV <-> 1400000uV, set 900000uV, enabling | suspend -61uV, enabling ; init 900000uV
- MMC: dwmmc@fe310000: 2, sdhci@fe330000: 0, dwmmc@fe320000: 1
- Invalid bus 0 (err=-19)
- *** Warning - spi_flash_probe_bus_cs() failed, using default environment
- In: serial
- Out: serial
- Err: serial
- Model: Pine64 RK3399 Pinebook Pro
- switch to partitions #0, OK
- mmc1 is current device
- Found IDB in SDcard
- Bootdev(atags): mmc 1
- PartType: EFI
- rockchip_get_boot_mode: Could not found misc partition
- boot mode: None
- init_resource_list: failed to get resource part, ret=-1
- Can't find file:logo.bmp
- failed to display uboot logo
- CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
- CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
- aplll 816000 KHz
- apllb 24000 KHz
- dpll 800000 KHz
- cpll 24000 KHz
- gpll 800000 KHz
- npll 600000 KHz
- vpll 24000 KHz
- aclk_perihp 133333 KHz
- hclk_perihp 66666 KHz
- pclk_perihp 33333 KHz
- aclk_perilp0 266666 KHz
- hclk_perilp0 88888 KHz
- pclk_perilp0 44444 KHz
- hclk_perilp1 100000 KHz
- pclk_perilp1 50000 KHz
- Net: No ethernet found.
- Hit key to stop autoboot('CTRL+C'): 0
- do_boot_rockchip: Could not find boot part
- Checking for mmc dev 1...
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1 for bootable partitions...
- Scanning mmc 1:c for extlinux or boot scripts...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- reading /extlinux/extlinux.conf
- 216 bytes read in 3 ms (70.3 KiB/s)
- 1: Chromium OS
- Retrieving file: /initramfs-linux.img
- reading /initramfs-linux.img
- 8975043 bytes read in 380 ms (22.5 MiB/s)
- Retrieving file: /Image-5.9.0-rc4-00034-g7fe10096c150
- reading /Image-5.9.0-rc4-00034-g7fe10096c150
- 26139136 bytes read in 1095 ms (22.8 MiB/s)
- append: initrd=/initramfs-linux.img console=tty1 console=ttyS2,1500000 root=LABEL=ROOT-A rw rootwait loglevel=7
- Retrieving file: /dtbs/rockchip/rk3399-pinebook-pro.dtb
- reading /dtbs/rockchip/rk3399-pinebook-pro.dtb
- 80685 bytes read in 11 ms (7 MiB/s)
- ## Flattened Device Tree blob at 08300000
- Booting using the fdt blob at 0x8300000
- Loading Ramdisk to f3548000, end f3dd72c3 ... OK
- Loading Device Tree to 00000000f3531000, end 00000000f3547b2c ... OK
- Adding bank: 0x00200000 - 0xf8000000 (size: 0xf7e00000)
- Total: 2530.454 ms
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.9.0-rc4-00034-g7fe10096c150 (brent@brent-laptop) (Chromium OS 11.0_pre394483_p20200618-r11 clang version 11.0.0 (/var/cache/chromeos-cache/distfiles/egit-src/llvm-project b726d071b4aa46004228fc38ee5bfd167f999bfe), LLD 11.0.0 (/var/cache/chromeos-cache/distfiles/egit-src/llvm-project b726d071b4aa46004228fc38ee5bfd167f999bfe)) #1 SMP PREEMPT Thu Sep 10 12:14:41 CEST 2020
- [ 0.000000] Machine model: Pine64 Pinebook Pro
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000f6000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf57db100-0xf57dcfff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
- [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 23 pages/cpu s54104 r8192 d31912 u94208
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: console=tty1 console=ttyS2,1500000 root=LABEL=ROOT-A rw rootwait loglevel=7 earlycon=uart8250,mmio32,0xff1a0000
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
- [ 0.000000] Memory: 3847020K/4061184K available (14076K kernel code, 2294K rwdata, 7496K rodata, 1600K init, 483K bss, 181396K reserved, 32768K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f4c80000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x00000000f4c50000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f4c60000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
- [ 0.000000] random: get_random_bytes called from start_kernel+0x1c8/0x384 with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.003268] Console: colour dummy device 80x25
- [ 0.004327] printk: console [tty1] enabled
- [ 0.004820] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.005821] pid_max: default: 32768 minimum: 301
- [ 0.006352] LSM: Security Framework initializing
- [ 0.006874] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.007622] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.010157] rcu: Hierarchical SRCU implementation.
- [ 0.010877] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.011946] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
- [ 0.013071] fsl-mc MSI: interrupt-controller@fee20000 domain created
- [ 0.018873] EFI services will not be available.
- [ 0.019694] smp: Bringing up secondary CPUs ...
- [ 0.020656] Detected VIPT I-cache on CPU1
- [ 0.020689] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.020703] GICv3: CPU1: using allocated LPI pending table @0x00000000f4c70000
- [ 0.020746] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.021315] Detected VIPT I-cache on CPU2
- [ 0.021339] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.021350] GICv3: CPU2: using allocated LPI pending table @0x00000000f4d00000
- [ 0.021376] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.021906] Detected VIPT I-cache on CPU3
- [ 0.021929] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.021940] GICv3: CPU3: using allocated LPI pending table @0x00000000f4d10000
- [ 0.021965] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.025170] CPU features: detected: EL2 vector hardening
- [ 0.025567] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.025837] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.026179] Detected PIPT I-cache on CPU4
- [ 0.027470] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.027957] GICv3: CPU4: using allocated LPI pending table @0x00000000f4d20000
- [ 0.029193] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.037779] Detected PIPT I-cache on CPU5
- [ 0.039012] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.039461] GICv3: CPU5: using allocated LPI pending table @0x00000000f4d30000
- [ 0.040567] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.045840] smp: Brought up 1 node, 6 CPUs
- [ 0.060164] SMP: Total of 6 processors activated.
- [ 0.060650] CPU features: detected: 32-bit EL0 Support
- [ 0.061170] CPU features: detected: CRC32 instructions
- [ 0.061676] CPU features: detected: 32-bit EL1 Support
- [ 0.282355] CPU: All CPU(s) started at EL2
- [ 0.283630] alternatives: patching kernel code
- [ 0.289093] devtmpfs: initialized
- [ 0.305039] KASLR disabled due to lack of seed
- [ 0.306626] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.307615] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.310688] pinctrl core: initialized pinctrl subsystem
- [ 0.313584] DMI not present or invalid.
- [ 0.315349] NET: Registered protocol family 16
- [ 0.336139] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
- [ 0.337037] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.338125] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.339057] audit: initializing netlink subsys (disabled)
- [ 0.340054] audit: type=2000 audit(0.332:1): state=initialized audit_enabled=0 res=1
- [ 0.341460] debugfs: Directory 'dummy-' with parent 'regmap' already present!
- [ 0.342369] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.342377] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.343779] cpuidle: using governor menu
- [ 0.345100] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.347756] ASID allocator initialised with 65536 entries
- [ 0.351031] Serial: AMBA PL011 UART driver
- [ 0.439624] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.440390] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.441043] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.441694] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.444339] cryptd: max_cpu_qlen set to 1000
- [ 0.449167] ACPI: Interpreter disabled.
- [ 0.452400] vcc_12v: supplied by vcc_sysin
- [ 0.453279] vcc3v3_sys: supplied by vcc_sysin
- [ 0.454179] vcc5v0_usb: supplied by vcc_sysin
- [ 0.455174] vcc_0v9: supplied by vcc3v3_sys
- [ 0.455878] vcca1v8_s3: supplied by vcc3v3_sys
- [ 0.456698] vcc3v0_sd: supplied by vcc3v3_sys
- [ 0.457690] vcc3v3_panel: supplied by vcc3v3_sys
- [ 0.567565] vcc3v3_ssd: supplied by vcc3v3_sys
- [ 0.568459] vcc5v0_otg: supplied by vcc5v0_usb
- [ 0.569343] vbus_5vout: supplied by vcc5v0_usb
- [ 0.573864] iommu: Default domain type: Translated
- [ 0.578087] vgaarb: loaded
- [ 0.578911] SCSI subsystem initialized
- [ 0.581247] usbcore: registered new interface driver usbfs
- [ 0.581821] usbcore: registered new interface driver hub
- [ 0.582612] usbcore: registered new device driver usb
- [ 0.584717] pps_core: LinuxPPS API ver. 1 registered
- [ 0.585208] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.586111] PTP clock support registered
- [ 0.586746] EDAC MC: Ver: 3.0.0
- [ 0.591308] FPGA manager framework
- [ 0.591877] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.595314] clocksource: Switched to clocksource arch_sys_counter
- [ 0.596647] VFS: Disk quotas dquot_6.6.0
- [ 0.597094] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.598110] pnp: PnP ACPI: disabled
- [ 0.605940] NET: Registered protocol family 2
- [ 0.607276] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 0.608183] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 0.609245] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
- [ 0.610600] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.612076] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.612882] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.613992] NET: Registered protocol family 1
- [ 0.616802] RPC: Registered named UNIX socket transport module.
- [ 0.617395] RPC: Registered udp transport module.
- [ 0.617853] RPC: Registered tcp transport module.
- [ 0.618311] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.619043] PCI: CLS 0 bytes, default 64
- [ 0.619718] Unpacking initramfs...
- [ 1.169780] Freeing initrd memory: 8764K
- [ 1.180987] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 1.184988] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
- [ 1.186947] kvm [1]: IPA Size Limit: 40bits
- [ 1.189018] kvm [1]: vgic-v2@fff20000
- [ 1.189583] kvm [1]: GIC system register CPU interface enabled
- [ 1.193445] kvm [1]: vgic interrupt IRQ10
- [ 1.196160] kvm [1]: Hyp mode initialized successfully
- [ 1.204690] Initialise system trusted keyrings
- [ 1.206039] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 1.215287] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.218225] NFS: Registering the id_resolver key type
- [ 1.218825] Key type id_resolver registered
- [ 1.219308] Key type id_legacy registered
- [ 1.219796] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.220782] 9p: Installing v9fs 9p2000 file system support
- [ 1.270964] Key type asymmetric registered
- [ 1.271379] Asymmetric key parser 'x509' registered
- [ 1.271942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 1.272667] io scheduler mq-deadline registered
- [ 1.273109] io scheduler kyber registered
- [ 1.311750] EINJ: ACPI disabled.
- [ 1.324896] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 1.325719] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
- [ 1.328536] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 1.329297] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
- [ 1.341549] pwm-regulator: supplied by regulator-dummy
- [ 1.350532] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.355296] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
- [ 1.356656] serial serial0: tty port ttyS0 registered
- [ 1.358469] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A
- [ 1.359800] printk: console [ttyS2] enabled
- [ 1.359800] printk: console [ttyS2] enabled
- [ 1.360583] printk: bootconsole [uart8250] disabled
- [ 1.360583] printk: bootconsole [uart8250] disabled
- [ 1.364586] SuperH (H)SCI(F) driver initialized
- [ 1.366423] msm_serial: driver initialized
- [ 1.371139] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 1.384075] loop: module loaded
- [ 1.386324] megasas: 07.714.04.00-rc1
- [ 1.399135] spi-nor spi0.0: gd25q128 (16384 Kbytes)
- [ 1.431536] libphy: Fixed MDIO Bus: probed
- [ 1.432866] tun: Universal TUN/TAP device driver, 1.6
- [ 1.435862] thunder_xcv, ver 1.0
- [ 1.436230] thunder_bgx, ver 1.0
- [ 1.436598] nicpf, ver 1.0
- [ 1.439111] hclge is initializing
- [ 1.439738] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
- [ 1.440383] hns3: Copyright (c) 2017 Huawei Corporation.
- [ 1.440950] e1000: Intel(R) PRO/1000 Network Driver
- [ 1.441387] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 1.441996] e1000e: Intel(R) PRO/1000 Network Driver
- [ 1.442440] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 1.443192] igb: Intel(R) Gigabit Ethernet Network Driver
- [ 1.443677] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 1.444205] igbvf: Intel(R) Gigabit Virtual Function Network Driver
- [ 1.444762] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 1.446012] sky2: driver version 1.30
- [ 1.448887] VFIO - User Level meta-driver version: 0.3
- [ 1.477790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.478497] ehci-pci: EHCI PCI platform driver
- [ 1.479288] ehci-platform: EHCI generic platform driver
- [ 1.482781] ehci-platform fe380000.usb: EHCI Host Controller
- [ 1.483512] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
- [ 1.484624] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
- [ 1.498900] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 1.500617] hub 1-0:1.0: USB hub found
- [ 1.500983] hub 1-0:1.0: 1 port detected
- [ 1.504350] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 1.504883] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
- [ 1.505910] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
- [ 1.518894] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 1.526417] hub 2-0:1.0: USB hub found
- [ 1.526783] hub 2-0:1.0: 1 port detected
- [ 1.528161] ehci-orion: EHCI orion driver
- [ 1.528920] ehci-exynos: EHCI Exynos driver
- [ 1.529488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.530366] ohci-pci: OHCI PCI platform driver
- [ 1.531163] ohci-platform: OHCI generic platform driver
- [ 1.532321] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 1.532951] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
- [ 1.534054] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
- [ 1.598514] hub 3-0:1.0: USB hub found
- [ 1.598948] hub 3-0:1.0: 1 port detected
- [ 1.600228] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 1.600850] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
- [ 1.601921] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
- [ 1.665995] hub 4-0:1.0: USB hub found
- [ 1.666360] hub 4-0:1.0: 1 port detected
- [ 1.667684] ohci-exynos: OHCI Exynos driver
- [ 1.669809] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.670381] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
- [ 1.671797] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
- [ 1.672863] xhci-hcd xhci-hcd.0.auto: irq 228, io mem 0xfe900000
- [ 1.678063] hub 5-0:1.0: USB hub found
- [ 1.678437] hub 5-0:1.0: 1 port detected
- [ 1.679224] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.679731] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
- [ 1.680422] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 1.681133] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.685291] hub 6-0:1.0: USB hub found
- [ 1.685654] hub 6-0:1.0: 1 port detected
- [ 1.687204] usbcore: registered new interface driver usb-storage
- [ 1.693829] i2c /dev entries driver
- [ 1.711180] rk808 0-001b: chip id: 0x0
- [ 1.718327] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 1.719457] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 1.720109] DCDC_REG1: supplied by vcc_sysin
- [ 1.722185] DCDC_REG2: supplied by vcc_sysin
- [ 1.723413] DCDC_REG3: supplied by vcc_sysin
- [ 1.724005] DCDC_REG4: supplied by vcc_sysin
- [ 1.724886] LDO_REG1: supplied by vcc_sysin
- [ 1.725617] LDO_REG2: supplied by vcc_sysin
- [ 1.726354] LDO_REG3: supplied by vcc_sysin
- [ 1.728295] LDO_REG4: supplied by vcc_sysin
- [ 1.728868] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
- [ 1.730479] LDO_REG5: supplied by vcc_sysin
- [ 1.731164] vcca3v0_codec: Bringing 1800000uV into 3000000-3000000uV
- [ 1.732766] LDO_REG6: supplied by vcc_sysin
- [ 1.734241] LDO_REG7: supplied by vcc_sysin
- [ 1.735640] LDO_REG8: supplied by vcc_sysin
- [ 1.737128] SWITCH_REG1: supplied by vcc3v3_sys
- [ 1.737864] SWITCH_REG2: supplied by vcc3v3_sys
- [ 1.743566] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 1.744312] fan53555-reg: supplied by vcc_1v8
- [ 1.746032] vcc0v9_s3: supplied by vcc_1v8
- [ 1.749671] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
- [ 1.750345] fan53555-reg: supplied by vcc_1v8
- [ 1.770682] dw_wdt ff848000.watchdog: No valid TOPs array specified
- [ 1.781059] cpu cpu0: EM: created perf domain
- [ 1.784840] random: fast init done
- [ 1.787374] cpu cpu4: EM: created perf domain
- [ 1.788042] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
- [ 1.793194] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
- [ 1.797284] sdhci: Secure Digital Host Controller Interface driver
- [ 1.797830] sdhci: Copyright(c) Pierre Ossman
- [ 1.798592] Synopsys Designware Multimedia Card Interface Driver
- [ 1.799726] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
- [ 1.800353] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
- [ 1.800939] dwmmc_rockchip fe310000.mmc: Version ID is 270a
- [ 1.801453] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
- [ 1.802422] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
- [ 1.802952] mmc_host mmc0: card is non-removable.
- [ 1.862922] usb 2-1: new high-speed USB device number 2 using ehci-platform
- [ 1.919444] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 1.931638] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
- [ 1.932295] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
- [ 1.932898] dwmmc_rockchip fe320000.mmc: Version ID is 270a
- [ 1.933436] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
- [ 1.934554] dwmmc_rockchip fe320000.mmc: Got CD GPIO
- [ 1.947118] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 1.962583] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.967259] mmc2: CQHCI version 5.10
- [ 1.968087] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 1.970472] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.972523] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.975911] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 1.980241] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
- [ 1.994775] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
- [ 1.998901] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.001585] usbcore: registered new interface driver usbhid
- [ 2.002084] usbhid: USB HID core driver
- [ 2.007919] NET: Registered protocol family 17
- [ 2.008459] 9pnet: Installing 9P2000 support
- [ 2.008880] Key type dns_resolver registered
- [ 2.009526] registered taskstats version 1
- [ 2.009893] Loading compiled-in X.509 certificates
- [ 2.012420] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
- [ 2.021477] hub 2-1:1.0: USB hub found
- [ 2.022227] hub 2-1:1.0: 4 ports detected
- [ 2.036878] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
- [ 2.043463] input: gpio-key-lid as /devices/platform/gpio-key-lid/input/input0
- [ 2.047337] input: gpio-key-power as /devices/platform/gpio-key-power/input/input1
- [ 2.050214] ALSA device list:
- [ 2.050510] No soundcards found.
- [ 2.051226] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
- [ 2.053073] Freeing unused kernel memory: 1600K
- [ 2.069300] mmc2: Command Queue Engine enabled
- [ 2.069750] mmc2: new HS200 MMC card at address 0001
- [ 2.071047] mmcblk2: mmc2:0001 DA4128 116 GiB
- [ 2.071633] mmcblk2boot0: mmc2:0001 DA4128 partition 1 4.00 MiB
- [ 2.072331] mmcblk2boot1: mmc2:0001 DA4128 partition 2 4.00 MiB
- [ 2.073042] mmcblk2rpmb: mmc2:0001 DA4128 partition 3 16.0 MiB, chardev (234:0)
- [ 2.083178] Run /init as init process
- [ 2.102910] usb 3-1: new low-speed USB device number 2 using ohci-platform
- :: running early hook [udev]
- Warning: /lib/modules/5.9.0-rc4-00034-g7fe10096c150/modules.devname not found - ignoring
- Starting version 246.1-1-arch
- :: running hook [udev]
- :: Triggering uevents...
- [ 2.175364] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 95
- [ 2.176004] mmc1: new ultra high speed SDR104 SDHC card at address 59b4
- [ 2.177925] mmcblk1: mmc1:59b4 USD00 14.7 GiB
- [ 2.195679] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
- [ 2.314885] usb 2-1.2: new high-speed USB device number 3 using ehci-platform
- [ 2.343780] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0001/input/input2
- [ 2.403592] hid-generic 0003:258A:001E.0001: input: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0
- [ 2.429498] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input3
- [ 2.431360] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input4
- [ 2.432809] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input5
- [ 2.491142] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input6
- [ 2.492562] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input7
- [ 2.493904] hid-generic 0003:258A:001E.0002: input: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
- :: performing fsck on '/dev/mmcblk1p3'
- ROOT-A was not cleanly unmounted, check forced.
- [ 2.813518] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 47
- [ 2.818814] mmc0: new ultra high speed SDR104 SDIO card at address 0001
- ROOT-A: |== | 4.4% ROOT-A: |===== / 8.8% ROOT-A: |========== - 17.5% ROOT-A: |=============== \ 26.2% ROOT-A: |==================== | 35.0% ROOT-A: |====================== / 39.4% ROOT-A: |========================= - 43.8% ROOT-A: |=========================== \ 48.1% ROOT-A: |============================= | 52.5% ROOT-A: |================================== / 61.2% ROOT-A: |======================================= - 70.1% ROOT-A: |============================================ \ 78.8% ROOT-A: |========================================================| 100.0% ROOT-A: 9400/128000 files (11.2% non-contiguous), 248423/512000 blocks
- :: mounting '/dev/mmcblk1p3' on real root
- :: running cleanup hook [udev]
- [ 4.995991] random: init: uninitialized urandom read (12 bytes read)
- [ 5.434668] udevd[215]: starting version 225
- [ 5.457111] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 5.457769] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 5.490123] random: crng init done
- [ 5.490456] random: 7 urandom warning(s) missed due to ratelimiting
- [ 5.657983] EXT4-fs (mmcblk1p1): The kernel was not built with CONFIG_QUOTA and CONFIG_QFMT_V2
- [ 5.668890] chromeos-boot-alert: self_repair
- chromeos-boot-alert: self_repair
- [ 5.892787] frecon[350]: No monitor available, running headless!
- [ 5.897099] frecon[350]: Cannot get DBUS connection
- [ 33.763124] vcc3v3_ssd: disabling
- [ 33.763450] vbus_5vout: disabling
- [ 33.763759] vcc0v9_s3: disabling
- [ 33.764070] LDO_REG1: disabling
- [ 65.904360] frecon[350]: DBUS init failed after a timeout of 60 sec
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement