Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.235533] platform b018000.regulator: Driver qcom,cpr-regulator requests probe deferral
- [ 0.235982] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
- [ 0.236107] i2c-msm-v2 78ba000.i2c: error on clk_get(core_clk):-517
- [ 0.236133] i2c-msm-v2 78ba000.i2c: error probe() failed with err:-517
- [ 0.236173] platform 78ba000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.236590] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.236703] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
- [ 0.236727] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
- [ 0.236763] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.237165] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.237278] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
- [ 0.237302] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
- [ 0.237338] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.237741] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.237852] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
- [ 0.237876] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
- [ 0.237912] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.238129] msm-thermal qcom,msm-thermal.15: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.238166] msm-thermal qcom,msm-thermal.15: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.238190] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.238222] msm-thermal qcom,msm-thermal.15: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.238256] msm-thermal qcom,msm-thermal.15: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.238637] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
- [ 0.239615] msm-thermal qcom,msm-thermal.15: probe_sensor_info:unable to find DT for sensor-information.KTM continues
- [ 0.239656] msm-thermal qcom,msm-thermal.15: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
- [ 0.250610] qcom,rpmcc-8936 1874000.qcom,rpmcc: Registered RPM clocks.
- [ 0.265732] qcom,gcc-8936 1800000.qcom,gcc: Registered GCC clocks
- [ 0.265943] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
- [ 0.266139] platform b111050.qcom,cpu-clock-8939: Driver cpu-clock-8939 requests probe deferral
- [ 0.266842] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
- [ 0.266949] cpr_read_fuse_revision: apc_corner: fuse revision = 3
- [ 0.266979] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x3008186908b18ecf, speed_bits = 2
- [ 0.267006] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x18, pvs_version = 0
- [ 0.267177] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1062500 -> 1082500 uV
- [ 0.267213] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1082500 1250000] uV
- [ 0.267235] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
- [ 0.267257] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
- [ 0.267483] platform b018000.regulator: Driver qcom,cpr-regulator requests probe deferral
- [ 0.267967] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
- [ 0.268122] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.268147] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.269330] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.269472] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.269497] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.271646] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.271846] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.271870] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.273029] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
- [ 0.292029] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
- [ 0.316083] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
- [ 0.352164] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
- [ 0.396264] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
- [ 0.452385] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1c MSTR_STS:0x011363c8 OPER:0x00000010
- [ 0.272831] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.452453] Failed reading reg=3 rc=-107
- [ 0.452481] ncp6335d-regulator 4-001c: Unable to identify NCP6335D, rc(-107)
- [ 0.452568] ncp6335d-regulator: probe of 4-001c failed with error -107
- [ 0.453947] fan53555-regulator 4-0060: fan53555-regulator Option[0] Rev[12] Detected!
- [ 0.456944] fan53555-regulator: 1050 <--> 1350 mV at 1150 mV fast normal
- [ 0.458524] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.458681] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.458705] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.459863] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
- [ 0.459982] platform b111050.qcom,cpu-clock-8939: Driver cpu-clock-8939 requests probe deferral
- [ 0.460314] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
- [ 0.460410] cpr_read_fuse_revision: apc_corner: fuse revision = 3
- [ 0.460439] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x3008186908b18ecf, speed_bits = 2
- [ 0.460467] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x18, pvs_version = 0
- [ 0.460636] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1062500 -> 1082500 uV
- [ 0.460672] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1082500 1250000] uV
- [ 0.460694] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
- [ 0.460716] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
- [ 0.461019] cpr_init_cpr_efuse: apc_corner: [row:27] = 0xa090860421a53b2a
- [ 0.461066] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 1057
- [ 0.461089] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 1057
- [ 0.461110] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1260
- [ 0.461154] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 1098
- [ 0.461180] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1219
- [ 0.461302] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
- [ 0.461321] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.315
- [ 0.461386] cpr_virtual_corner_quot_adjust: apc_corner: corner=4 adjusted quotient=994
- [ 0.461413] cpr_virtual_corner_quot_adjust: apc_corner: corner=5 adjusted quotient=994
- [ 0.461438] cpr_virtual_corner_quot_adjust: apc_corner: corner=6 adjusted quotient=994
- [ 0.461465] cpr_virtual_corner_quot_adjust: apc_corner: corner=7 adjusted quotient=994
- [ 0.461492] cpr_virtual_corner_quot_adjust: apc_corner: corner=8 adjusted quotient=994
- [ 0.461519] cpr_virtual_corner_quot_adjust: apc_corner: corner=9 adjusted quotient=994
- [ 0.461544] cpr_virtual_corner_quot_adjust: apc_corner: corner=10 adjusted quotient=994
- [ 0.461571] cpr_virtual_corner_quot_adjust: apc_corner: corner=11 adjusted quotient=994
- [ 0.461599] cpr_virtual_corner_quot_adjust: apc_corner: corner=12 adjusted quotient=1057
- [ 0.461624] cpr_virtual_corner_quot_adjust: apc_corner: corner=13 adjusted quotient=1057
- [ 0.461737] cpr_virtual_corner_quot_adjust: apc_corner: corner=24 adjusted quotient=1332
- [ 0.461789] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 1057
- [ 0.461807] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1057
- [ 0.461824] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1057
- [ 0.461841] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 994
- [ 0.461859] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 994
- [ 0.461876] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 994
- [ 0.461894] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 994
- [ 0.461911] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 994
- [ 0.461928] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 994
- [ 0.461946] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[10] = 994
- [ 0.461964] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[11] = 994
- [ 0.461981] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[12] = 1057
- [ 0.461999] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[13] = 1057
- [ 0.462017] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[14] = 1098
- [ 0.462035] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[15] = 1123
- [ 0.462053] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[16] = 1147
- [ 0.462070] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[17] = 1171
- [ 0.462088] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[18] = 1177
- [ 0.462106] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[19] = 1195
- [ 0.462124] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[20] = 1208
- [ 0.462141] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[21] = 1219
- [ 0.462159] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[22] = 1219
- [ 0.462177] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[23] = 1219
- [ 0.462194] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[24] = 1332
- [ 0.462212] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[25] = 1219
- [ 0.462230] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[26] = 1219
- [ 0.462247] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[27] = 1219
- [ 0.462265] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[28] = 1219
- [ 0.462519] cpr_virtual_corner_voltage_adjust: apc_corner: corner=24 adjusted open-loop voltage=1285000
- [ 0.462685] cpr_fill_override_voltage: apc_corner: floor override voltage: [1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1100000 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500] uV
- [ 0.462851] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 3
- [ 0.462905] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
- [ 0.462932] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
- [ 0.463295] apc_corner: 0 <--> 0 mV
- [ 0.463673] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 0
- [ 0.487289] bio: create slab <bio-0> at 0
- [ 0.489697] KPI: Bootloader start count = 49303
- [ 0.489715] KPI: Bootloader end count = 94380
- [ 0.489730] KPI: Bootloader display count = 85727
- [ 0.489744] KPI: Bootloader load kernel count = 4085
- [ 0.489759] KPI: Kernel MPM timestamp = 115878
- [ 0.489773] KPI: Kernel MPM Clock frequency = 32768
- [ 0.489811] socinfo_print: v8, id=239, ver=3.0, raw_id=2315, raw_ver=1, hw_plat=11, hw_plat_ver=65536
- [ 0.491448] spk_vreg: no parameters
- [ 0.464696] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.493042] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.493595] tps65132-pos: 5000 mV
- [ 0.494410] i2c-msm-v2 78b6000.i2c: ARB_LOST: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x3e MSTR_STS:0x081121d0 OPER:0x00000e60
- [ 0.494479] tps65132_regulator_get_voltage: read reg 0 failed, rc = -2
- [ 0.494809] tps65132-neg: 5000 mV
- [ 1.001611] i2c-msm-v2 78b6000.i2c: TIMEOUT_ERROR(val:504msec) misconfigured GPIO or slave pulling bus line(s) low
- [ 1.102050] i2c-msm-v2 78b6000.i2c: bus lines held low by a slave detected
- [ 1.102073] i2c-msm-v2 78b6000.i2c: Executing bus recovery procedure (9 clk pulse)
- [ 1.102208] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3e MSTR_STS:0x04116388 OPER:0x00000000
- [ 1.117971] i2c-msm-v2 78b6000.i2c: Bus recovery success after 1 retries
- [ 1.118021] tps65132_regulator_get_voltage: failed to write reg 255, rc = -107
- [ 1.118482] vgaarb: loaded
- [ 1.119360] SCSI subsystem initialized
- [ 1.119925] usbcore: registered new interface driver usbfs
- [ 1.119957] usbcore: registered new interface driver hub
- [ 1.120177] usbcore: registered new device driver usb
- [ 1.120333] media: Linux media interface: v0.10
- [ 1.120395] Linux video capture interface: v2.00
- [ 1.120647] BATTERY: batterydata_init: Battery-data device created!
- [ 1.122899] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
- [ 1.122986] ION-heap mm: Cannot specify alignment for this type of heap
- [ 1.123066] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- [ 1.123207] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
- [ 1.123345] cma: Assigned CMA region at 0 to 17.qcom,ion-heap device
- [ 1.123484] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
- [ 1.123748] ION heap system created
- [ 1.123896] ION heap mm created at 0x00000000f8c00000 with size 6d00000
- [ 1.123908] ION heap qsecom created at 0x00000000f7000000 with size 1900000
- [ 1.123919] ION heap audio created at 0x00000000f6c00000 with size 314000
- [ 1.123930] ION heap pil_1 created at 0x000000008be00000 with size 600000
- [ 1.123965] ION heap pil_2 created at 0x0000000086800000 with size 5600000
- [ 1.124386] msm_bus_fabric_init_driver
- [ 1.124477] msm_bus_device 580000.ad-hoc-bus: Dev 1024
- [ 1.124492] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 1.124500] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 1.124554] msm_bus_device 580000.ad-hoc-bus: Dev 2048
- [ 1.124566] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 1.124574] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 1.124619] msm_bus_device 580000.ad-hoc-bus: Dev 0
- [ 1.124631] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 1.124639] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 1.124686] msm_bus_device 580000.ad-hoc-bus: Dev 4096
- [ 1.124699] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 1.124707] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 1.126046] msm_bus_init_clk: Valid node clk node 1024 ctx 0
- [ 1.126053] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 2048 ctx 0msm_bus_init_clk: Valid node clk node 2048 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0msm_bus_init_clk: Valid node clk node 4096 ctx 1
- [ 1.130350] gdsc_venus: no parameters
- [ 1.130634] gdsc_mdss: no parameters
- [ 1.130797] gdsc_jpeg: no parameters
- [ 1.131055] gdsc_vfe: no parameters
- [ 1.131228] gdsc_oxili_gx: no parameters
- [ 1.131388] gdsc_venus_core0: fast normal
- [ 1.131522] gdsc_venus_core1: fast normal
- [ 1.132007] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- [ 1.132533] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
- [ 1.133251] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8000bc0000, with 2 ctx banks
- [ 1.133777] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001780000, with 20 ctx banks
- [ 1.137115] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
- [ 1.137238] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
- [ 1.137357] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
- [ 1.137478] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
- [ 1.137596] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
- [ 1.137713] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
- [ 1.137831] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
- [ 1.137946] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
- [ 1.138082] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
- [ 1.138200] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
- [ 1.138315] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
- [ 1.138430] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
- [ 1.138560] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
- [ 1.138676] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
- [ 1.138793] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
- [ 1.138914] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
- [ 1.139035] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
- [ 1.139153] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
- [ 1.139271] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
- [ 1.139390] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
- [ 1.139506] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
- [ 1.139622] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
- [ 1.140506] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.140932] Bluetooth: ffffffc00dd7fd80
- [ 1.140957] NET: Registered protocol family 31
- [ 1.140963] Bluetooth: ffffffc00dd7fd80
- [ 1.140971] Bluetooth: ffffffc00dd7fd60Bluetooth: ffffffc00dd7fd50Bluetooth: ffffffc00dd7fd50
- [ 1.141146] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.141164] cfg80211: World regulatory domain updated:
- [ 1.141169] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 1.141175] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1.141180] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1.141186] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1.141191] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 1.141196] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 1.141201] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 1.141207] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 1.141212] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 1.141824] Switching to clocksource arch_sys_counter
- [ 1.166926] NET: Registered protocol family 2
- [ 1.167461] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
- [ 1.167670] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 1.167892] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.167944] TCP: reno registered
- [ 1.167955] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 1.167998] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 1.168230] NET: Registered protocol family 1
- [ 1.168251] PCI: CLS 0 bytes, default 64
- [ 1.169317] gcc-mdss-8936 qcom,gcc-mdss.18: Registered GCC MDSS clocks.
- [ 1.169751] Trying to unpack rootfs image as initramfs...
- [ 1.208159] Freeing initrd memory: 1120K (ffffffc002000000 - ffffffc002118000)
- [ 1.212302] audit: initializing netlink socket (disabled)
- [ 1.212333] type=2000 audit(1.203:1): initialized
- [ 1.215989] Registering sdcardfs 0.1
- [ 1.216174] NTFS driver 2.1.30 [Flags: R/O].
- [ 1.216296] fuse init (API version 7.23)
- [ 1.216666] msgmni has been set to 3661
- [ 1.216698] SELinux: Registering netfilter hooks
- [ 1.219439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 1.219447] io scheduler noop registered (default)
- [ 1.219500] io scheduler bfq registered
- [ 1.219504] BFQ I/O-scheduler: v7r8
- [ 1.221279] platform qcom,smp2pgpio-ssr-smp2p-1-in.52: Driver smp2pgpio requests probe deferral
- [ 1.221350] platform qcom,smp2pgpio-ssr-smp2p-1-out.53: Driver smp2pgpio requests probe deferral
- [ 1.221866] platform qcom,smp2pgpio-ssr-smp2p-4-in.58: Driver smp2pgpio requests probe deferral
- [ 1.221970] platform qcom,smp2pgpio-ssr-smp2p-4-out.59: Driver smp2pgpio requests probe deferral
- [ 1.222265] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
- [ 1.222280] mdss_mdp_probe+0x218/0xb18->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
- [ 1.222309] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-pipe-cursor-off : doesn't exist in device tree
- [ 1.222343] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
- [ 1.222354] mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:1
- [ 1.222360] mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:2
- [ 1.222370] mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:3
- [ 1.222387] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
- [ 1.222522] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
- [ 1.222536] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
- [ 1.223011] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
- [ 1.225316] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 1.225457] mdss_dsi_panel_init: Panel Name = hx8394F_HD720p_video_BOE
- [ 1.225668] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 1.225703] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 1.225712] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 1.225720] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 1.225730] mdss_dsi_parse_panel_features:1208, Disp_en gpio not specified
- [ 1.225927] mdss_dsi_panel_init: Continuous splash enabled
- [ 1.226160] dsi_panel_device_register:1871, Disp_en gpio not specified
- [ 1.226170] dsi_panel_device_register:1879, TE gpio not specified
- [ 1.226177] dsi_panel_device_register: bklt_en gpio not specified
- [ 1.226386] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
- [ 1.226391] PLL 1 Clock's did not register
- [ 1.226421] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800093c000 ctrl_size=25c phy_base=ffffff800093e500 phy_size=2b0
- [ 1.227632] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi
- [ 1.227813] mdss_hw_rev_init: MDP Rev=10080000
- [ 1.227965] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
- [ 1.227975] mdss_dsi_pinctrl_init: failed to get pinctrl
- [ 1.227979] mdss_dsi_ctrl_probe: failed to get pin resources
- [ 1.228171] mdss_dsi_find_panel_of_node: invalid pan node, selecting prim panel
- [ 1.228177] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_hx8394f_boe_720p_video:1:none
- [ 1.228189] mdss_dsi_ctrl: probe of 1aa0000.qcom,mdss_dsi failed with error 45
- [ 1.228623] mdss_dsi_status_init: DSI status check interval:5000
- [ 1.228851] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.6
- [ 1.229670] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
- [ 1.229696] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
- [ 1.230096] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
- [ 1.230119] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
- [ 1.230139] mdss_mdp_splash_parse_dt: splash mem child node is not present
- [ 1.231782] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
- [ 1.232863] msm_rpm_log_probe: OK
- [ 1.234336] NET: Registered protocol family 27
- [ 1.235972] In memshare_probe, Memshare probe success
- [ 1.237827] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
- [ 1.237846] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
- [ 1.239290] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
- [ 1.239397] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
- [ 1.239766] core_ctl: Creating CPU group 0
- [ 1.239771] core_ctl: Init CPU0 state
- [ 1.239775] core_ctl: Init CPU1 state
- [ 1.239779] core_ctl: Init CPU2 state
- [ 1.239783] core_ctl: Init CPU3 state
- [ 1.239953] core_ctl: Creating CPU group 4
- [ 1.239963] core_ctl: Init CPU4 state
- [ 1.239967] core_ctl: Init CPU5 state
- [ 1.239972] core_ctl: Init CPU6 state
- [ 1.239977] core_ctl: Init CPU7 state
- [ 1.250215] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
- [ 1.254668] brd: module loaded
- [ 1.256303] loop: module loaded
- [ 1.256872] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000
- [ 1.256900] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- [ 1.256907] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0
- [ 1.256928] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
- [ 1.257058] QSEECOM: qseecom_probe: secure app region addr=0x8c400000 size=0x1900000
- [ 1.265625] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 1.265633] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 1.265691] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 1.265696] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 1.265742] i2c-core: driver [tasha-i2c-core] using legacy suspend method
- [ 1.265746] i2c-core: driver [tasha-i2c-core] using legacy resume method
- [ 1.267256] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
- [ 1.267656] i2c-msm-v2 78ba000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:1) mode:FIFO slv_addr:0xe MSTR_STS:0x091343c8 OPER:0x00000090
- [ 1.267695] nfc-nci 6-000e: nfcc_hw_check: - no NFCC available
- [ 1.268230] SCSI Media Changer driver v0.25
- [ 1.269810] tun: Universal TUN/TAP device driver, 1.6
- [ 1.269819] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.271630] PPP generic driver version 2.4.2
- [ 1.271812] PPP BSD Compression module registered
- [ 1.271819] PPP Deflate Compression module registered
- [ 1.271842] PPP MPPE Compression module registered
- [ 1.271849] NET: Registered protocol family 24
- [ 1.272365] wcnss_wlan probed in built-in mode
- [ 1.273645] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- [ 1.273901] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- [ 1.274017] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
- [ 1.274115] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
- [ 1.274738] msm_otg 78d9000.usb: msm_otg probe
- [ 1.277188] msm_otg 78d9000.usb: OTG regs = ffffff8000bde000
- [ 1.281352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.281362] ehci-pci: EHCI PCI platform driver
- [ 1.281384] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 1.281600] Unable to get vbus_otg
- [ 1.281609] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
- [ 1.281628] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
- [ 1.281645] ehci-msm2: Qualcomm EHCI Host Controller
- [ 1.282778] usbcore: registered new interface driver cdc_acm
- [ 1.282785] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.282808] usbcore: registered new interface driver ccid_bridge
- [ 1.282985] ccid_bridge_init: success
- [ 1.283009] usbcore: registered new interface driver usb-storage
- [ 1.283031] usbcore: registered new interface driver ums-alauda
- [ 1.283049] usbcore: registered new interface driver ums-cypress
- [ 1.283067] usbcore: registered new interface driver ums-datafab
- [ 1.283084] usbcore: registered new interface driver ums-freecom
- [ 1.283101] usbcore: registered new interface driver ums-isd200
- [ 1.283119] usbcore: registered new interface driver ums-jumpshot
- [ 1.283136] usbcore: registered new interface driver ums-karma
- [ 1.283153] usbcore: registered new interface driver ums-sddr09
- [ 1.283171] usbcore: registered new interface driver ums-sddr55
- [ 1.283191] usbcore: registered new interface driver ums-usbat
- [ 1.283274] usbcore: registered new interface driver usbserial
- [ 1.283294] usbcore: registered new interface driver qc_csvt
- [ 1.283319] usbserial: USB Serial support registered for qc_csvt
- [ 1.283340] usbcore: registered new interface driver usb_ehset_test
- [ 1.285046] mousedev: PS/2 mouse device common for all mice
- [ 1.286736] input: ft5x06_720p as /devices/soc.0/78b9000.i2c/i2c-5/5-003e/input/input0
- [ 1.514069] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
- [ 1.514632] ft5x06_720p 5-003e: Device ID = 0x14
- [ 1.515282] ft5x06_720p 5-003e: report rate = 90Hz
- [ 1.516993] ft5x06_720p 5-003e: Firmware version = 4.0.0
- [ 1.517441] FT5X06-TP-TAG INFO:boardid_info_tp:S88509A1_M27
- [ 1.517450] FT5X06-TP-TAG DEBUG:[1650]********************Enter CTP Auto Upgrade********************
- [ 1.571180] FT5X06-TP-TAG INFO:Update FW For A9
- [ 1.571187] FT5X06-TP-TAG DEBUG:[1061]update firmware size:28832
- [ 1.571193] FT5X06-TP-TAG DEBUG:[1110]update firmware size:28832
- [ 1.571199] FT5X06-TP-TAG DEBUG:[1126][FTS] uc_tp_fm_ver = 4.
- [ 1.571206] FT5X06-TP-TAG DEBUG:[1127][FTS] uc_host_fm_ver = 4.
- [ 1.571276] [ TSP ] ist30xx_init()
- [ 1.571647] [ TSP ] ### IMAGIS probe(ver:2.3.0.0, protocol:B, addr:0x50) ###
- [ 1.571907] IST30XX 5-0050: irq gpio request failed
- [ 1.571921] [ TSP ] Error, ist30xx init driver
- [ 1.654055] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xe MSTR_STS:0x051363c8 OPER:0x00000010
- [ 1.654092] kxtj9 0-000e: read err int source
- [ 1.654100] kxtj9 0-000e: device not recognized
- [ 1.654231] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0xe MSTR_STS:0x0d1343c8 OPER:0x00000090
- [ 1.654264] kxtj9 0-000e: soft power off failed
- [ 1.654332] kxtj9 0-000e: kxtj9_probe: kxtj9_probe err=-107
- [ 1.654344] kxtj9: probe of 0-000e failed with error -107
- [ 1.654692] stk3x1x_probe: driver version = 3.10.1 20150902
- [ 1.654702] stk3x1x_probe: probe with device tree
- [ 1.655062] stk3x1x_power_ctl: enable stk3x1x power
- [ 1.655599] stk3x1x_check_pid: PID=0x1d, RID=0xc3
- [ 1.662335] stk3x1x_read_otp25: otp25=0x80
- [ 1.662341] stk3x1x_check_pid: p_wv_r_bd_with_co = 0x7
- [ 1.662440] input: light as /devices/virtual/input/input1
- [ 1.662612] input: proximity as /devices/virtual/input/input2
- [ 1.662948] stk3x1x_power_ctl: disable stk3x1x power
- [ 1.663061] stk3x1x_probe: probe successfully
- [ 1.766051] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x0d1343c8 OPER:0x00000010
- [ 1.766094] mpu6050 0-0068: Fail to read power mode, ret=-107
- [ 1.766103] mpu6050 0-0068: Cannot get invalid chip type
- [ 1.766154] mpu6050 0-0068: Probe device return error-107
- [ 1.766170] mpu6050: probe of 0-0068 failed with error -107
- [ 1.766201] AKM compass driver: initialize.
- [ 1.851999] input: compass as /devices/virtual/input/input3
- [ 1.852424] akm09911 0-000c: successfully probed.
- [ 1.852805] [wingtech] bma2x2_probe: start...
- [ 1.875479] input: bma2x2-accel as /devices/soc.0/78b6000.i2c/i2c-0/0-0018/input/input4
- [ 1.875645] input: bma_interrupt as /devices/soc.0/78b6000.i2c/i2c-0/0-0018/input/input5
- [ 1.875917] bma2x2-accel 0-0018: BMA2x2 driver probe successfully
- [ 1.875994] [wingtech] bma2x2_probe: success.
- [ 1.876033] i2c-core: driver [bma2x2-accel] using legacy suspend method
- [ 1.876039] i2c-core: driver [bma2x2-accel] using legacy resume method
- [ 1.876049] Driver ltr5590 init.
- [ 1.876267] msm-tlmm-pinctrl 1000000.pinctrl: pin gp-113 already requested by 0-0048; cannot claim for 0-0023
- [ 1.876275] msm-tlmm-pinctrl 1000000.pinctrl: pin-113 (0-0023) status -22
- [ 1.876284] msm-tlmm-pinctrl 1000000.pinctrl: could not request pin 113 on device msm-pinctrl
- [ 1.876291] ltr559 0-0023: Error applying setting, reverse things back
- [ 1.876451] msm-tlmm-pinctrl 1000000.pinctrl: pin gp-113 already requested by 0-0048; cannot claim for 0-0023
- [ 1.876460] msm-tlmm-pinctrl 1000000.pinctrl: pin-113 (0-0023) status -22
- [ 1.876468] msm-tlmm-pinctrl 1000000.pinctrl: could not request pin 113 on device msm-pinctrl
- [ 1.876476] ltr559 0-0023: Error applying setting, reverse things back
- [ 1.876482] ltr559 0-0023: Can't select pinctrl state on=1
- [ 1.876489] ltr559 0-0023: power on fail
- [ 1.876504] ltr559: probe of 0-0023 failed with error -8
- [ 1.876560] yas,position=0,
- [ 1.876704] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x2e MSTR_STS:0x0d1343c8 OPER:0x00000010
- [ 1.876751] compass 0-002e: yas_i2c_rxdata: transfer failed.
- [ 1.876756] yas537 i2c error
- [ 1.876770] compass: probe of 0-002e failed with error -107
- [ 1.877061] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
- [ 1.877212] i2c /dev entries driver
- [ 1.879385] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
- [ 1.884639] LED trigger flashlight-trigger failed to register (-17)
- [ 1.885141] adp1660 i2c_add_driver success
- [ 1.885373] msm_flash_init_module:1053 Enter
- [ 1.885581] msm_flash_lm3642_init entry
- [ 1.886402] msm_eeprom_parse_memory_map: pageen not needed
- [ 1.933451] msm_cci_init: Failed in getting TOP gdscr regulator handle
- [ 1.933649] msm_cci_init:763: hw_version = 0x10020000
- [ 2.246650] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.246665] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.246679] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.246703] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.275066] msm_cci_init: Failed in getting TOP gdscr regulator handle
- [ 2.275249] msm_cci_init:763: hw_version = 0x10020000
- [ 2.390313] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.390328] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.390339] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.390351] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.390363] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.418699] msm_cci_init: Failed in getting TOP gdscr regulator handle
- [ 2.418879] msm_cci_init:763: hw_version = 0x10020000
- [ 2.419345] msm_cci_irq:930 MASTER_0 error 0x8000000
- [ 2.419371] msm_camera_cci_i2c_write: line 135 rc = -22
- [ 2.425890] read_eeprom_memory: page write failed
- [ 2.425895] msm_eeprom_platform_probe read_eeprom_memory failed
- [ 2.453946] qcom,eeprom: probe of 5a.qcom,eeprom failed with error -22
- [ 2.454422] msm_eeprom_parse_memory_map: pageen not needed
- [ 2.501720] msm_cci_init: Failed in getting TOP gdscr regulator handle
- [ 2.501927] msm_cci_init:763: hw_version = 0x10020000
- [ 2.941954] g_sctrl[0] ffffffc071420000
- [ 2.942381] g_sctrl[1] ffffffc071421000
- [ 2.942399] mt9m114_init_module:1155
- [ 2.942779] mt9m114_init_module:1160 rc -19
- [ 2.942820] ov5645_init_module:557
- [ 2.943101] ov7695_init_module:315
- [ 2.943508] MSM-CPP cpp_probe:3055 Bus master 1
- [ 2.957468] MSM-CPP cpp_init_hardware:953 CPP HW Version: 0x40020000
- [ 2.957480] MSM-CPP cpp_init_hardware:974 stream_cnt:0
- [ 2.960139] __msm_jpeg_init:1522] Jpeg Device id 0
- [ 2.960747] usbcore: registered new interface driver uvcvideo
- [ 2.960755] USB Video Class driver (1.1.1)
- [ 2.960760] gspca_main: v2.14.0 registered
- [ 2.961376] i2c 4-0057: Driver smb358-charger requests probe deferral
- [ 2.961460] BMS: bms_get_adc: vadc not found - defer probe rc=-517
- [ 2.961466] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
- [ 2.961478] spmi qpnp-vm-bms-9: Driver qcom,qpnp-vm-bms requests probe deferral
- [ 2.962467] qpnp_vadc_get_temp: VADC read error with -517
- [ 2.962478] thermal thermal_zone0: failed to read out thermal zone 0
- [ 2.979410] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 2.979528] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 2.980694] cpuidle: using governor ladder
- [ 2.980702] cpuidle: using governor menu
- [ 2.980725] sdhci: Secure Digital Host Controller Interface driver
- [ 2.980730] sdhci: Copyright(c) Pierre Ossman
- [ 2.980735] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.984682] sdhci_msm 7824900.sdhci: host_use_default_qos = 0
- [ 2.984693] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
- [ 2.984701] sdhci_msm 7824900.sdhci: dma_latency = 2
- [ 2.984708] sdhci_msm 7824900.sdhci: dma_latency = 401
- [ 2.984715] sdhci_msm 7824900.sdhci: dma_latency = 701
- [ 2.984723] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 3, qos type = 1
- [ 2.984731] sdhci_msm 7824900.sdhci: dma_latency = 2
- [ 2.984738] sdhci_msm 7824900.sdhci: dma_latency = 401
- [ 2.984745] sdhci_msm 7824900.sdhci: dma_latency = 701
- [ 2.984752] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 3, qos type = 2
- [ 2.984760] sdhci_msm 7824900.sdhci: dma_latency = 2
- [ 2.984767] sdhci_msm 7824900.sdhci: dma_latency = 401
- [ 2.984774] sdhci_msm 7824900.sdhci: dma_latency = 701
- [ 2.984781] sdhci_msm 7824900.sdhci: Host using mod dynamic pm_qos
- [ 2.985478] mmc0: no vqmmc regulator found
- [ 2.985491] mmc0: no vmmc regulator found
- [ 3.023436] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
- [ 3.030220] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
- [ 3.030231] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 1, qos type = 2
- [ 3.030240] sdhci_msm 7864900.sdhci: dma_latency = 401
- [ 3.030248] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 3.030255] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 3.030264] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 3.030271] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 3.030278] sdhci_msm 7864900.sdhci: Host using default pm_qos
- [ 3.031092] mmc1: no vqmmc regulator found
- [ 3.031105] mmc1: no vmmc regulator found
- [ 3.071421] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
- [ 3.075877] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 3.075894] qce 720000.qcedev: CE device = 0x0
- [ 3.075921] sps:BAM 0x0000000000704000 is registered.
- [ 3.076236] sps:BAM 0x0000000000704000 (va:0xffffff80016c0000) enabled: ver:0x25, number of pipes:8
- [ 3.079739] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 3.080267] qcedev: FIPS140-2 Known Answer Tests : Skipped
- [ 3.081277] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 3.081290] qcrypto 720000.qcrypto: CE device = 0x0
- [ 3.081697] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 3.082260] qcrypto 720000.qcrypto: qcrypto-ecb-aes
- [ 3.082356] qcrypto 720000.qcrypto: qcrypto-cbc-aes
- [ 3.082449] qcrypto 720000.qcrypto: qcrypto-ctr-aes
- [ 3.082537] qcrypto 720000.qcrypto: qcrypto-ecb-des
- [ 3.082629] qcrypto 720000.qcrypto: qcrypto-cbc-des
- [ 3.082715] qcrypto 720000.qcrypto: qcrypto-ecb-3des
- [ 3.082802] qcrypto 720000.qcrypto: qcrypto-cbc-3des
- [ 3.082884] qcrypto 720000.qcrypto: qcrypto-xts-aes
- [ 3.082992] qcrypto 720000.qcrypto: qcrypto-sha1
- [ 3.083104] qcrypto 720000.qcrypto: qcrypto-sha256
- [ 3.083203] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- [ 3.083303] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- [ 3.083399] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- [ 3.083495] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- [ 3.083594] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- [ 3.083691] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- [ 3.083788] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
- [ 3.083885] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
- [ 3.083981] qcrypto 720000.qcrypto: qcrypto-aes-ccm
- [ 3.084087] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
- [ 3.084092] qcrypto: FIPS140-2 Known Answer Tests: Skipped
- [ 3.084713] usbcore: registered new interface driver usbhid
- [ 3.084718] usbhid: USB HID core driver
- [ 3.084953] ashmem: initialized
- [ 3.085046] logger: created 256K log 'log_main'
- [ 3.085125] logger: created 256K log 'log_events'
- [ 3.085206] logger: created 256K log 'log_radio'
- [ 3.085286] logger: created 256K log 'log_system'
- [ 3.085428] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
- [ 3.085445] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 3.085567] input: qpnp_pon as /devices/virtual/input/input6
- [ 3.087122] PMIC@SID0: PM8916 v2.0.1 options: 0, 0, 0, 0
- [ 3.087939] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
- [ 3.088161] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
- [ 3.089162] devfreq cpubw: Couldn't update frequency transition information.
- [ 3.089290] devfreq mincpubw: Couldn't update frequency transition information.
- [ 3.089857] devfreq qcom,cci.62: Couldn't update frequency transition information.
- [ 3.090926] fpc1020_probe -
- [ 3.090979] fpc1020 fpc1020.70: fpc,gpio_irq 951
- [ 3.091007] fpc1020 fpc1020.70: fpc,gpio_rst 954
- [ 3.091172] fpc1020 fpc1020.70: found pin control fpc1020_reset_reset
- [ 3.091180] fpc1020 fpc1020.70: found pin control fpc1020_reset_active
- [ 3.091188] fpc1020 fpc1020.70: found pin control fpc1020_irq_active
- [ 3.091200] fpc1020 fpc1020.70: Selected 'fpc1020_reset_reset'
- [ 3.091212] fpc1020 fpc1020.70: Selected 'fpc1020_irq_active'
- [ 3.091419] fpc1020 fpc1020.70: Enabling hardware
- [ 3.091426] fpc1020 fpc1020.70: fpc1020_probe: ok
- [ 3.091690] usbcore: registered new interface driver snd-usb-audio
- [ 3.092423] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.092441] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.100232] msm-pcm-lpa qcom,msm-pcm-lpa.23: msm_pcm_probe: dev name qcom,msm-pcm-lpa.23
- [ 3.100810] platform qcom,msm-voip-dsp.25: Driver msm-voip-dsp requests probe deferral
- [ 3.101099] platform qcom,msm-pcm-voice.26: Driver msm-pcm-voice requests probe deferral
- [ 3.104991] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.105012] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.106460] msm8x16-asoc-wcd sound.76: ASoC: platform (null) not registered
- [ 3.106492] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.106520] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.106811] mmc0: BKOPS_EN bit = 0
- [ 3.107137] u32 classifier
- [ 3.107142] Actions configured
- [ 3.107151] Netfilter messages via NETLINK v0.30.
- [ 3.107351] random: nonblocking pool is initialized
- [ 3.107369] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 3.107705] ctnetlink v0.93: registering with nfnetlink.
- [ 3.107777] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 3.107783] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 3.108081] xt_time: kernel timezone is -0000
- [ 3.108268] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.108442] arp_tables: (C) 2002 David S. Miller
- [ 3.108485] TCP: bic registered
- [ 3.108491] TCP: cubic registered
- [ 3.108496] TCP: westwood registered
- [ 3.108501] TCP: htcp registered
- [ 3.108506] Initializing XFRM netlink socket
- [ 3.108742] NET: Registered protocol family 10
- [ 3.109588] mip6: Mobile IPv6
- [ 3.109613] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.109764] sit: IPv6 over IPv4 tunneling driver
- [ 3.110192] NET: Registered protocol family 17
- [ 3.110258] Bridge firewalling registered
- [ 3.110268] Ebtables v2.0 registered
- [ 3.110451] Bluetooth: ffffffc00dd7fd50
- [ 3.110471] Bluetooth: ffffffc00dd7fd40Bluetooth: ffffffc00dd7fd70Bluetooth: ffffffc00dd7fd40Bluetooth: ffffffc00dd7fd40Bluetooth: ffffffc00dd7fd20Bluetooth: ffffffc00dd7fd90Bluetooth: ffffffc00dd7fd70
- [ 3.110538] l2tp_core: L2TP core driver, V2.0
- [ 3.110553] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 3.110559] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 3.110572] l2tp_netlink: L2TP netlink interface
- [ 3.110593] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 3.110607] l2tp_debugfs: L2TP debugfs support
- [ 3.110613] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- [ 3.114139] cma: Assigned CMA region at 0 to qcom,mba-mem.163 device
- [ 3.115102] Unable to get vbus_otg
- [ 3.115116] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
- [ 3.115133] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
- [ 3.117428] thermal_mitigations = 2000, 1000, 800, 800; thermal_levels = 4
- [ 3.117587] mmc0: new HS200 MMC card at address 0001
- [ 3.117615] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0x15 (ok)
- [ 3.117971] mmcblk0: mmc0:0001 R1J96N 14.6 GiB
- [ 3.118155] mmcblk0rpmb: mmc0:0001 R1J96N partition 3 4.00 MiB
- [ 3.118726] chip->power_ok = 1
- [ 3.119242] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 3.120283] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31
- [ 3.129370] battery powe supply creat attr file!!
- [ 3.129513] smb358_otg_vreg: no parameters
- [ 3.129851] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 3.138493] devfreq gpubw: Couldn't update frequency transition information.
- [ 3.143257] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 3.143467] smb358-charger 4-0057: SMB358 successfully probed. charger=1, batt=1
- [ 3.144032] current ma1 is 0
- [ 3.147360] of_batterydata_read_data: wingtech-xingwangda-4v4-4000mah loaded
- [ 3.159199] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70] Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
- [ 3.160155] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 3.179785] BMS: calculate_initial_soc: warm_reset=1 est_ocv=0 shutdown_soc_invalid=0 shutdown_ocv=3898000 shutdown_soc=57 last_soc=57 calculated_soc=57 last_ocv_uv=3898000
- [ 3.217973] BMS: qpnp_vm_bms_probe: probe success: soc=57 vbatt=3851310 ocv=3898000 warm_reset=1
- [ 3.218038] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.218068] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.219864] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.219884] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.221449] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.221481] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.221510] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.221740] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.221770] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.222147] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.222163] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.222895] msm_otg 78d9000.usb: phy_reset: success
- [ 3.223739] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.223765] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.223788] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.224265] Registering SWP/SWPB emulation handler
- [ 3.256591] mmc1: new ultra high speed SDR104 SDHC card at address 0007
- [ 3.256891] mmcblk1: mmc1:0007 SD32G 28.9 GiB
- [ 3.257768] mmcblk1: p1
- [ 3.307983] spk_vreg: disabling
- [ 3.308021] mem_acc_corner: disabling
- [ 3.308027] regulator-dummy: disabling
- [ 3.308112] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.308146] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.308693] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.308710] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.310322] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.310354] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.310379] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.311530] file system registered
- [ 3.311565] mbim_init: initialize 1 instances
- [ 3.311703] mbim_init: Initialized 1 ports
- [ 3.311709] mbim_bam_setup: no_ports:1
- [ 3.311803] mbim_bam_setup: Initialized 1 ports
- [ 3.312600] rndis_qc_init: initialize rndis QC instance
- [ 3.312937] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 3.312944] android_usb gadget: Number of LUNs=3
- [ 3.312952] lun0: LUN: removable file: (no medium)
- [ 3.312958] lun1: LUN: read only CD-ROM file: (no medium)
- [ 3.312964] lun2: LUN: removable file: (no medium)
- [ 3.313191] android_usb gadget: android_usb ready
- [ 3.313201] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
- [ 3.313309] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.313349] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.314059] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.314078] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.315417] input: gpio-keys as /devices/soc.0/gpio_keys.67/input/input7
- [ 3.315887] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 1970-06-10 03:28:40 UTC (13836520)
- [ 3.315945]
- [ 3.315962] /soc/i2c@78b8000/cw2015@62: could not get #gpio-cells for /soc/qcom,mdss_mdp@1a00000/qcom,mdss_dsi_nt35521s_ebbg_720p_video
- [ 3.315997] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.316027] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.316054] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.316112] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.316141] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.316539] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.316554] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.318116] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.318139] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.318161] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.448175] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- [ 3.448187] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
- [ 3.462342] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 3.653918] cw201x 4-0062: cw_bat_gpio_configure irq gpio not provided
- [ 3.653928] ------------[ cut here ]------------
- [ 3.653942] WARNING: at drivers/gpio/gpiolib.c:126 gpio_to_desc+0x2c/0x50()
- [ 3.653947] invalid GPIO -22
- [ 3.653956] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 3.10.107-lineageos #3-postmarketOS
- [ 3.653962] Call trace:
- [ 3.653973] [<ffffffc000087918>] dump_backtrace+0x0/0xfc
- [ 3.653981] [<ffffffc000087a28>] show_stack+0x14/0x1c
- [ 3.653989] [<ffffffc000b21f28>] dump_stack+0x20/0x28
- [ 3.653998] [<ffffffc000099760>] warn_slowpath_common+0x74/0xa0
- [ 3.654006] [<ffffffc0000997fc>] warn_slowpath_fmt+0x44/0x4c
- [ 3.654013] [<ffffffc0002f0460>] gpio_to_desc+0x2c/0x50
- [ 3.654021] [<ffffffc0002f315c>] __gpio_to_irq+0xc/0x18
- [ 3.654030] [<ffffffc00063ffd0>] cw_bat_probe+0x668/0x82c
- [ 3.654039] [<ffffffc000576e44>] i2c_device_probe+0x88/0xd0
- [ 3.654048] [<ffffffc0004146dc>] driver_probe_device+0x160/0x20c
- [ 3.654056] [<ffffffc000414820>] __driver_attach+0x4c/0x90
- [ 3.654063] [<ffffffc000412d48>] bus_for_each_dev+0x8c/0x94
- [ 3.654071] [<ffffffc000414514>] driver_attach+0x20/0x28
- [ 3.654079] [<ffffffc000413570>] bus_add_driver+0x158/0x224
- [ 3.654087] [<ffffffc000415044>] driver_register+0xa8/0x12c
- [ 3.654094] [<ffffffc000577afc>] i2c_register_driver+0x60/0xac
- [ 3.654103] [<ffffffc000f3c538>] cw_bat_init+0x18/0x20
- [ 3.654111] [<ffffffc000f098b4>] do_one_initcall+0x110/0x118
- [ 3.654119] [<ffffffc000f09af8>] kernel_init_freeable+0x23c/0x240
- [ 3.654127] [<ffffffc000b19410>] kernel_init+0x18/0xcc
- [ 3.654133] ---[ end trace ed34ba64c2f8bf82 ]---
- [ 3.654140] cw201x 4-0062: request irq failed
- [ 3.654145] ------------[ cut here ]------------
- [ 3.654152] WARNING: at drivers/gpio/gpiolib.c:126 gpio_to_desc+0x2c/0x50()
- [ 3.654158] invalid GPIO -22
- [ 3.654165] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G W 3.10.107-lineageos #3-postmarketOS
- [ 3.654170] Call trace:
- [ 3.654177] [<ffffffc000087918>] dump_backtrace+0x0/0xfc
- [ 3.654184] [<ffffffc000087a28>] show_stack+0x14/0x1c
- [ 3.654192] [<ffffffc000b21f28>] dump_stack+0x20/0x28
- [ 3.654199] [<ffffffc000099760>] warn_slowpath_common+0x74/0xa0
- [ 3.654206] [<ffffffc0000997fc>] warn_slowpath_fmt+0x44/0x4c
- [ 3.654214] [<ffffffc0002f0460>] gpio_to_desc+0x2c/0x50
- [ 3.654221] [<ffffffc0002f2be8>] gpio_free+0xc/0x18
- [ 3.654228] [<ffffffc000640014>] cw_bat_probe+0x6ac/0x82c
- [ 3.654235] [<ffffffc000576e44>] i2c_device_probe+0x88/0xd0
- [ 3.654243] [<ffffffc0004146dc>] driver_probe_device+0x160/0x20c
- [ 3.654251] [<ffffffc000414820>] __driver_attach+0x4c/0x90
- [ 3.654259] [<ffffffc000412d48>] bus_for_each_dev+0x8c/0x94
- [ 3.654266] [<ffffffc000414514>] driver_attach+0x20/0x28
- [ 3.654273] [<ffffffc000413570>] bus_add_driver+0x158/0x224
- [ 3.654281] [<ffffffc000415044>] driver_register+0xa8/0x12c
- [ 3.654288] [<ffffffc000577afc>] i2c_register_driver+0x60/0xac
- [ 3.654295] [<ffffffc000f3c538>] cw_bat_init+0x18/0x20
- [ 3.654302] [<ffffffc000f098b4>] do_one_initcall+0x110/0x118
- [ 3.654310] [<ffffffc000f09af8>] kernel_init_freeable+0x23c/0x240
- [ 3.654317] [<ffffffc000b19410>] kernel_init+0x18/0xcc
- [ 3.654322] ---[ end trace ed34ba64c2f8bf83 ]---
- [ 3.757958]
- [ 3.758026] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.758057] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.758359] battery_current_limit qcom,bcl.16: battery_current_limit:probe_btm_properties Error reading key:qcom,ibat-monitor. ret = -19
- [ 3.758757] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.758774] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.760320] msm_thermal:interrupt_mode_init Interrupt mode init
- [ 3.760449] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.760480] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.760568] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.760700] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.760740] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.763634] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.763655] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.764079] lpm_wa_probe: Missing qcom,non_boot_cpu_index property
- [ 3.765361] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.765393] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.765427] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.765537] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.765607] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.765742] led_gpio_flash_probe:probe successfully!
- [ 3.766141] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.766157] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.767850] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.767881] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.767912] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.767992] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.768023] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.769155] qcom,cc-debug-8936 1874000.qcom,cc-debug: Registered Debug Mux successfully
- [ 3.769698] msm8x16-asoc-wcd sound.76: msm8x16_asoc_machine_probe: missing qcom,msm-mclk-freq in dt node
- [ 3.769715] msm8x16-asoc-wcd sound.76: default codec configured
- [ 3.769863] clock_late_init: Removing enables held for handed-off clocks
- [ 3.771323] msm8x16-asoc-wcd sound.76: ASoC: CODEC (null) not registered
- [ 3.771352] msm8x16-asoc-wcd sound.76: snd_soc_register_card failed (-517)
- [ 3.771381] platform sound.76: Driver msm8x16-asoc-wcd requests probe deferral
- [ 3.771455] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 3.771485] spmi msm8x16_wcd_codec-14: Driver wcd-spmi-core requests probe deferral
- [ 3.774129] ALSA device list:
- [ 3.774135] No soundcards found.
- [ 3.774732] Warning: unable to open an initial console.
- [ 3.774876] Freeing unused kernel memory: 416K (ffffffc000f09000 - ffffffc000f71000)
- [ 4.305828] bio: create slab <bio-1> at 1
- [ 4.543164] enable_store: android_usb: already disabled
- [ 4.543446] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
- [ 4.543488] android_usb gadget: using random self ethernet address
- [ 4.543504] android_usb gadget: using random host ethernet address
- [ 4.545237] rndis0: MAC 4a:48:ce:78:a5:71
- [ 4.545249] rndis0: HOST MAC ce:83:66:d9:9c:c0
- [ 4.545321] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
- [ 4.546826] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 4.679537] msm_otg 78d9000.usb: Avail curr from USB = 100
- [ 4.679755] android_work: android_work: did not send uevent (0 0 0000000000000000)
- [ 4.680339] current ma1 is 100
- [ 4.684048] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 4.692057] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
- [ 4.692593] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
- [ 4.694423] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
- [ 4.791735] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 4.795451] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 4.797815] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 4.921663] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 4.922890] android_usb gadget: high-speed config #1: 86000c8.android_usb
- [ 4.923220] msm_otg 78d9000.usb: Avail curr from USB = 500
- [ 4.923259] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
- [ 4.924192] current ma1 is 500
- [ 4.927918] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 4.978144] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 6.333788] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.403017] udevd[824]: starting version 3.2.5
- [ 7.419748] udevd[825]: starting eudev-3.2.5
- [ 7.571367] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 7.607730] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 7.614851] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 7.622241] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 7.629328] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 7.635873] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 7.642951] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 7.815172] msm_csid_subdev_ioctl: command not found
- [ 7.815690] msm_ispif_subdev_ioctl: invalid cmd 0x80685600 received
- [ 7.815707] msm_ispif_release: ispif base is NULL
- [ 7.816169] msm_csiphy_subdev_ioctl: command not found
- [ 7.816499] msm_cci_release invalid ref count 0 / cci state 1
- [ 7.816508] msm_sensor_cci_i2c_util line 522 rc = -22
- [ 7.816512] msm_actuator_close:928 cci_init failed
- [ 7.817424] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:119 default
- [ 7.818125] msm_csiphy_subdev_ioctl: command not found
- [ 7.819358] msm_isp_ioctl_unlocked: Invalid ISP command
- [ 7.819953] msm_csid_subdev_ioctl: command not found
- [ 7.824575] msm_pm_qos_add_request: add request
- [ 7.824614] msm_isp_ioctl_compat:832 failed: invalid params ffffffc071470000
- [ 7.824620] msm_isp_ioctl_compat:835 failed (null)
- [ 7.824639] msm_cci_release invalid ref count 0 / cci state 1
- [ 7.824644] msm_sensor_cci_i2c_util line 522 rc = -22
- [ 7.824648] msm_actuator_close:928 cci_init failed
- [ 7.824654] msm_csiphy_release csiphy dev NULL / ref_count ZERO
- [ 7.824659] msm_csiphy_release csiphy dev NULL / ref_count ZERO
- [ 7.824665] msm_csid_release: csid invalid state 1
- [ 7.824670] msm_csid_release: csid invalid state 1
- [ 7.824674] msm_csid_release: csid invalid state 1
- [ 7.824679] msm_cci_release invalid ref count 0 / cci state 1
- [ 7.824686] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:119 default
- [ 7.824791] msm_led_flash_subdev_ioctl:48 invalid cmd -2140645888
- [ 7.828876] MSM-CPP cpp_init_hardware:953 CPP HW Version: 0x40020000
- [ 7.828891] MSM-CPP cpp_init_hardware:974 stream_cnt:0
- [ 7.828949] MSM-CPP msm_cpp_subdev_ioctl:1904 Wrong ioctl_ptr ffffffc06fc97d10, sd ffffffc071422008
- [ 7.829282] MSM-CPP msm_cpp_subdev_ioctl:2227 shutdown cpp node. open cnt:0
- [ 7.829647] msm_pm_qos_remove_request: remove request
- [ 7.935093] iris_radio: Cannot open the command channel
- [ 7.936372] msm_vidc: info: Opening video instance: ffffffc07142a000, 0
- [ 7.937133] msm_vidc: info: Opening video instance: ffffffc071302000, 1
- [ 8.248727] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
- [ 8.298636] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
- [ 8.298938] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
- [ 8.300546] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
- [ 13.474678] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 23.490526] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 33.506498] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 43.522501] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 53.538505] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 63.554516] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 68.066046] subsys-pil-tz 1de0000.qcom,venus: venus: Failed to locate venus.mdt
- [ 68.066060] msm_vidc: err: Failed to download firmware
- [ 68.067428] msm_vidc: err: Failed to load video firmware
- [ 68.067448] msm_vidc: err: msm_comm_init_core - firmware loading failed
- [ 68.067453] msm_vidc: err: Failed to move from state: 1 to 2
- [ 68.067457] msm_vidc: err: Failed to move video instance to init state
- [ 68.067523] msm_vidc: err: Failed to create video instance, core: 0, type = 0
- [ 68.071369] subsys-pil-tz 1de0000.qcom,venus: venus: Failed to locate venus.mdt
- [ 68.071385] msm_vidc: err: Failed to download firmware
- [ 68.072920] msm_vidc: err: Failed to load video firmware
- [ 68.072930] msm_vidc: err: msm_comm_init_core - firmware loading failed
- [ 68.072935] msm_vidc: err: Failed to move from state: 1 to 2
- [ 68.072940] msm_vidc: err: Failed to move video instance to init state
- [ 68.072984] msm_vidc: err: Failed to create video instance, core: 0, type = 1
- [ 73.570573] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 83.586583] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 93.602495] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 103.618538] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 113.634479] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 123.650478] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 133.666584] XXX::smb358_get_prop_batt_status:reg=0x5
- [ 143.682478] XXX::smb358_get_prop_batt_status:reg=0x5
Add Comment
Please, Sign In to add comment