API tools faq
paste
hardik1

RK3188 Olimex kernel with debian rootfs

hardik1
May 12th, 2017
145
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.88 KB | None | 0 0
raw download clone embed print report
  1. Opening serial port /dev/ttyUSB0
  2. 115200:8N1:xonxoff=0:rtscts=0
  3. Program will end in 30 seconds
  4. Printing timing information for each line
  5. Matching pattern 'Starting kernel.*' to set base time
  6. Use Control-C to stop...
  7. [0.000002 0.000002] ÒRK310BÒDDR Version 1.04 20140217
  8. [0.183655 0.183653] In
  9. [0.187590 0.003935] DDR3
  10. [0.187847 0.000257] 300MHz
  11. [0.194617 0.006770] Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  12. [0.218881 0.024264] Memory OK
  13. [0.270897 0.052016] OUT
  14. [0.761580 0.490683] BUILD==2.18 2
  15. [0.761991 0.000411] No.1 FLASH ID:d7 ff ff ff ff ff
  16. [0.762540 0.000549] No.2 FLASH ID:d2 ff ff ff ff ff
  17. [0.763085 0.000545] No.3 FLASH ID:d2 ff ff ff ff ff
  18. [0.850237 0.087152] SdmmcInit=2 0
  19. [0.859100 0.008863] FwPartOffset=2000 , 400
  20. [0.859432 0.000332] OK! 100315
  21. [0.859552 0.000120] unsigned!
  22. [0.859661 0.000109] SecureBootEn = 0 0
  23. [0.859855 0.000194] Boot ver: 2014-10-29#2.19
  24. [0.865073 0.005218] start_linux=====111542
  25. [1.637542 0.772469] 882468 Starting kernel...@0x60408000
  26. [1.638594 0.001052]
  27. [1.674530 0.035936] [ 0.000000] Initializing cgroup subsys cpu
  28. [1.675263 0.000733] [ 0.000000] Linux version 3.0.36+ (hardik@ub) (gcc version 4.7.4 (Ubuntu/Linaro 4.7.4-3ubuntu12) ) #20 SMP PREEMPT Tue May 9 19:16:28 IST 2017
  29. [1.677186 0.001923] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  30. [1.698843 0.021657] [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  31. [1.699776 0.000933] [ 0.000000] Machine: RK30board
  32. [1.700116 0.000340] [ 0.000000] ddr size = 1024 M, set ion_reserve_size size to 125829120
  33. [1.700823 0.000707] [ 0.000000] memory reserve: Memory(base:0x98800000 size:120M) reserved for <ion>
  34. [1.723971 0.023148] [ 0.000000] memory reserve: Memory(base:0x97000000 size:24M) reserved for <fb0 buf>
  35. [1.724818 0.000847] [ 0.000000] memory reserve: Total reserved 144M
  36. [1.725324 0.000506] [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  37. [1.725972 0.000648] [ 0.000000] bootconsole [earlycon0] enabled
  38. [1.751613 0.025641] [ 0.000000] CPU SRAM: copied sram code from c0ae6000 to fef00100 - fef020d0
  39. [1.752463 0.000850] [ 0.000000] CPU SRAM: copied sram data from c0ae7fd0 to fef020d0 - fef02848
  40. [1.753239 0.000776] [ 0.000000] sram_log: @ 0q @ P 1 / ! aB@ 2 `" 2q : 4q
  41. [1.756123 0.002884] [ 0.000000] CLKDATA_MSG: pll_flag = 0x03
  42. [1.760505 0.004382] [ 0.000000] cpll auto set rate error
  43. [1.785453 0.024948] [ 0.000000] hzb test rmii clk get form clkin
  44. [1.785986 0.000533] [ 0.000000] CLKDATA_ERR: can't get a available nume and deno
  45. [1.786616 0.000630] [ 0.000000] CLKDATA_ERR: clk_frac_div can't get rate=48000000,uart0_frac_div
  46. [1.787568 0.000952] [ 0.000000] L310 cache controller enabled
  47. [1.788518 0.000950] [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  48. [1.810757 0.022239] [ 0.000000] DDR DEBUG: version 1.00 20131106
  49. [1.811463 0.000706] [ 0.000000] DDR DEBUG: DDR3 Device
  50. [1.811872 0.000409] [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  51. [1.834502 0.022630] [ 0.000000] DDR DEBUG: init success!!! freq=300MHz
  52. [1.835134 0.000632] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  53. [1.836156 0.001022] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x3, DGSL=1 extra clock, DGPS=90
  54. [1.858597 0.022441] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  55. [1.859608 0.001011] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
  56. [1.860592 0.000984] [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  57. [1.873357 0.012765] [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  58. [1.873952 0.000595] [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  59. [1.915041 0.041089] [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1c1b000 s6976 r8192 d13504 u32768
  60. [1.939586 0.024545] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 223232
  61. [1.941428 0.001842] [ 0.000000] Kernel command line: earlyprintk=ttyFIQ0,115200n8 console=ttyFIQ0 init=/sbin/init initrd=0x62000000,0x002C0000 root=/dev/mmcblk0p5 rw rootwait rootfstype=ext4 mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00006000@0x00006000(kernel),0x00006000@0x0000c000(boot),-@0x0016000(system) bootver=2014-10-29#2.19 firmware_ver=4.4.2
  62. [1.965664 0.024236] [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  63. [1.973540 0.007876] [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  64. [1.981403 0.007863] [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  65. [2.001377 0.019974] [ 0.000000] allocated 4194304 bytes of page_cgroup
  66. [2.001951 0.000574] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  67. [2.127494 0.125543] [ 0.000000] Memory: 880MB = 880MB total
  68. [2.127994 0.000500] [ 0.000000] Memory: 868996k/868996k available, 179580k reserved, 401408K highmem
  69. [2.128777 0.000783] [ 0.000000] Virtual kernel memory layout:
  70. [2.129203 0.000426] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  71. [2.129810 0.000607] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  72. [2.152650 0.022840] [ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
  73. [2.153813 0.001163] [ 0.000000] vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB)
  74. [2.154967 0.001154] [ 0.000000] lowmem : 0xc0000000 - 0xde800000 ( 488 MB)
  75. [2.175593 0.020626] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  76. [2.176605 0.001012] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  77. [2.177544 0.000939] [ 0.000000] .init : 0xc0408000 - 0xc0435000 ( 180 kB)
  78. [2.178480 0.000936] [ 0.000000] .text : 0xc0435000 - 0xc0a84274 (6461 kB)
  79. [2.188961 0.010481] [ 0.000000] .data : 0xc0a86000 - 0xc0ae5768 ( 382 kB)
  80. [2.189585 0.000624] [ 0.000000] .bss : 0xc0ae9024 - 0xc1411510 (9378 kB)
  81. [2.206026 0.016441] [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  82. [2.206904 0.000878] [ 0.000000] Preemptible hierarchical RCU implementation.
  83. [2.207503 0.000599] [ 0.000000] NR_IRQS:352
  84. [2.213260 0.005757] [ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
  85. [2.237510 0.024250] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  86. [2.238349 0.000839] [ 0.000000] rk_timer: version 1.3
  87. [2.238700 0.000351] [ 0.000000] Console: colour dummy device 80x30
  88. [2.239210 0.000510] [ 0.008665] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  89. [2.244364 0.005154] [ 0.017694] pid_max: default: 32768 minimum: 301
  90. [2.252512 0.008148] [ 0.022866] Security Framework initialized
  91. [2.253011 0.000499] [ 0.027359] SELinux: Initializing.
  92. [2.257761 0.004750] [ 0.031268] Mount-cache hash table entries: 512
  93. [2.282513 0.024752] [ 0.036816] Initializing cgroup subsys debug
  94. [2.283029 0.000516] [ 0.041534] Initializing cgroup subsys cpuacct
  95. [2.283533 0.000504] [ 0.046463] Initializing cgroup subsys memory
  96. [2.283997 0.000464] [ 0.051274] Initializing cgroup subsys freezer
  97. [2.284468 0.000471] [ 0.056212] CPU: Testing write buffer coherency: ok
  98. [2.468450 0.183982] [ 0.142473] CPU1: Booted secondary processor
  99. [2.469668 0.001218] [ 0.182467] CPU2: Booted secondary processor
  100. [2.470639 0.000971] [ 0.222464] CPU3: Booted secondary processor
  101. [2.471652 0.001013] [ 0.222498] Brought up 4 CPUs
  102. [2.472331 0.000679] [ 0.239944] SMP: Total of 4 processors activated (6525.87 BogoMIPS).
  103. [2.473924 0.001593] [ 0.247278] devtmpfs: initialized
  104. [2.483335 0.009411] [ 0.256961] NET: Registered protocol family 16
  105. [2.496934 0.013599] [ 0.262635] lcdc0 is used as primary display device contoller!
  106. [2.497899 0.000965] [ 0.269058] lcdc1 is used as external display device controller!
  107. [2.504933 0.007034] [ 0.275755] rk29sdk_wifi_bt_gpio_control_init: request wifi power gpio failed
  108. [2.515002 0.010069] <hit enter to activate fiq debugger>
  109. [2.515640 0.000638] 0.284850] console [ttyFIQ0] enabled, bootconsole disabled
  110. [2.537523 0.021883] [ 0.284850] console [ttyFIQ0] enabled, bootconsole disabled
  111. [2.538167 0.000644] [ 0.293797] Registered FIQ tty driver de0adc00
  112. [2.538633 0.000466] [ 0.294320] Loaded driver for PL330 DMAC-1 rk29-pl330
  113. [2.539210 0.000577] [ 0.294334] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  114. [2.539912 0.000702] [ 0.294480] Loaded driver for PL330 DMAC-2 rk29-pl330
  115. [2.550280 0.010368] [ 0.294492] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  116. [2.553774 0.003494] [ 0.326302] rk29xx_spim: driver initialized, fifo_len=32,bus_num=0
  117. [2.560027 0.006253] [ 0.332557] rk29xx_spim: driver initialized, fifo_len=32,bus_num=1
  118. [2.569108 0.009081] [ 0.343777] bio: create slab <bio-0> at 0
  119. [2.592529 0.023421] [ 0.348154] SCSI subsystem initialized
  120. [2.592983 0.000454] [ 0.348337] usbcore: registered new interface driver usbfs
  121. [2.593563 0.000580] [ 0.348414] usbcore: registered new interface driver hub
  122. [2.594123 0.000560] [ 0.362702] usbcore: registered new device driver usb
  123. [2.594654 0.000531] [ 0.362963] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
  124. [2.614855 0.020201] [ 0.363173] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
  125. [2.615445 0.000590] [ 0.363295] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  126. [2.616005 0.000560] [ 0.363412] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
  127. [2.616566 0.000561] [ 0.363575] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
  128. [2.636744 0.020178] [ 0.363783] Advanced Linux Sound Architecture Driver Version 1.0.24.
  129. [2.637414 0.000670] [ 0.364188] Bluetooth: Core ver 2.16
  130. [2.637788 0.000374] [ 0.364238] NET: Registered protocol family 31
  131. [2.638253 0.000465] [ 0.364248] Bluetooth: HCI device and connection manager initialized
  132. [2.658529 0.020276] [ 0.364263] Bluetooth: HCI socket layer initialized
  133. [2.659100 0.000571] [ 0.364273] Bluetooth: L2CAP socket layer initialized
  134. [2.659661 0.000561] [ 0.364299] Bluetooth: SCO socket layer initialized
  135. [2.660176 0.000515] [ 0.365309] rk fb probe ok!
  136. [2.660471 0.000295] [ 0.370207] act8846_set_init,line=17
  137. [2.660848 0.000377] [ 0.370219] act8846_set_init:g_pmic_type=3
  138. [2.681400 0.020552] [ 0.371976] act8846_set_init act_dcdc1 =1200000mV end
  139. [2.682572 0.001172] [ 0.373819] act8846_set_init vdd_core =1000000mV end
  140. [2.683536 0.000964] [ 0.375657] act8846_set_init vdd_cpu =1000000mV end
  141. [2.684067 0.000531] [ 0.377494] act8846_set_init act_dcdc4 =3000000mV end
  142. [2.703685 0.019618] [ 0.378701] act8846_set_init act_ldo1 =1000000mV end
  143. [2.704227 0.000542] [ 0.380439] act8846_set_init act_ldo2 =1200000mV end
  144. [2.704762 0.000535] [ 0.382177] act8846_set_init act_ldo3 =1800000mV end
  145. [2.705299 0.000537] [ 0.383915] act8846_set_init act_ldo4 =3300000mV end
  146. [2.705830 0.000531] [ 0.385651] act8846_set_init act_ldo5 =3300000mV end
  147. [2.725996 0.020166] [ 0.387386] act8846_set_init act_ldo6 =3300000mV end
  148. [2.726535 0.000539] [ 0.388493] act8846_set_init act_ldo7 =1800000mV end
  149. [2.727062 0.000527] [ 0.390229] act8846_set_init act_ldo8 =2800000mV end
  150. [2.727620 0.000558] [ 0.390247] act8846_set_init,line=78 END
  151. [2.747657 0.020037] [ 0.390291] i2c-core: driver [act8846] using legacy suspend method
  152. [2.748319 0.000662] [ 0.390302] i2c-core: driver [act8846] using legacy resume method
  153. [2.748956 0.000637] [ 0.390334] Switching to clocksource rk_timer
  154. [2.749415 0.000459] [ 0.391795] Switched to NOHz mode on CPU #0
  155. [2.749856 0.000441] [ 0.392498] Switched to NOHz mode on CPU #3
  156. [2.769906 0.020050] [ 0.392505] Switched to NOHz mode on CPU #2
  157. [2.770355 0.000449] [ 0.392514] Switched to NOHz mode on CPU #1
  158. [2.770797 0.000442] [ 0.398783] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf034000
  159. [2.771483 0.000686] [ 0.398836] fb0:win0
  160. [2.771713 0.000230] [ 0.398840] fb1:win1
  161. [2.791595 0.019882] [ 0.398842] fb2:win2
  162. [2.791841 0.000246] [ 0.398899] rk3188 lcdc0 clk enable...
  163. [2.792245 0.000404] [ 0.465440] rk3188 lcdc0 clk disable...
  164. [2.792646 0.000401] [ 0.524980] fb0:phy:97000000>>vir:e0000000>>len:0x1800000
  165. [2.793209 0.000563] [ 0.525250] rk_fb_register>>>>>fb0
  166. [2.793566 0.000357] [ 0.525577] rk_fb_register>>>>>fb1
  167. [2.793923 0.000357] [ 0.525607] rk3188 lcdc0 clk enable...
  168. [2.814953 0.021030] [ 0.525626] lcdc0: dclk:148500000>>fps:60
  169. [2.815422 0.000469] [ 0.525638] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
  170. [2.816079 0.000657] [ 0.550694] lcdc0 wakeup from standby!
  171. [2.816472 0.000393] [ 0.550706] lcdc0 win0 open,atv layer:1
  172. [2.816874 0.000402] [ 0.551128] rk3188 lcdc0 probe ok!
  173. [2.836852 0.019978] [ 0.551179] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf038000
  174. [2.837516 0.000664] [ 0.551207] no display device on lcdc1!?
  175. [2.837925 0.000409] [ 0.557889] 1951..sdmmc_is_selected_emmc: RK SDMMC is setted to support eMMC.
  176. [2.838667 0.000742] [ 0.558126] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [emmc]
  177. [2.859272 0.020605] [ 0.558279] NET: Registered protocol family 2
  178. [2.859761 0.000489] [ 0.558393] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  179. [2.860506 0.000745] [ 0.558706] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  180. [2.880909 0.020403] [ 0.559020]
  181. [2.881075 0.000166] [ 0.559023] drivers/mmc/core/core.c...2019.. ===== mmc_rescan Begin....[mmc0]
  182. [2.881833 0.000758] [ 0.559677] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  183. [2.882531 0.000698] [ 0.560988] TCP: Hash tables configured (established 65536 bind 65536)
  184. [2.902849 0.020318] [ 0.561002] TCP reno registered
  185. [2.903185 0.000336] [ 0.561015] UDP hash table entries: 256 (order: 1, 8192 bytes)
  186. [2.903825 0.000640] [ 0.561040] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  187. [2.904477 0.000652] [ 0.561323] NET: Registered protocol family 1
  188. [2.904931 0.000454] [ 0.561490] RK29 Backlight Driver Initialized.
  189. [2.925034 0.020103] [ 0.561707] Unpacking initramfs...
  190. [2.925398 0.000364] [ 0.564127] rk29_sdmmc_change_clk_div..1684.. newDiv=124, newCLK=299Khz [emmc]
  191. [2.926167 0.000769] [ 0.613517]
  192. [2.926324 0.000157] [ 0.613521] sdmmc_attach_mmc..1564.. ===== Begin to identify card as MMC-card [mmc0]
  193. [2.947795 0.021471] [ 0.701950] mmc0: BKOPS_EN bit is not set
  194. [2.948225 0.000430] [ 0.703414] rk29_sdmmc_change_clk_div..1684.. newDiv=1, newCLK=37125Khz [emmc]
  195. [2.948985 0.000760] [ 0.703754] mmc0: new high speed DDR MMC card at address 0001
  196. [2.949582 0.000597] [ 0.704000] sdmmc_rescan_try_freq...1932.. ===== Initialize MMC-card successfully. [mmc0]
  197. [2.958171 0.008589] [ 0.730515] cfg80211: Calling CRDA to update world regulatory domain
  198. [3.006584 0.048413] [ 0.762078] Freeing initrd memory: 2816K
  199. [3.007521 0.000937] [ 0.762174] PMU: registered new PMU device of type 0
  200. [3.008050 0.000529] [ 0.762270] efuse_version_val: efuse version = 51
  201. [3.008545 0.000495] [ 0.762283] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 8000
  202. [3.009304 0.000759] [ 0.762296] efuse_version_val: efuse version = 51
  203. [3.021186 0.011882] [ 0.762306] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 8000
  204. [3.021996 0.000810] [ 0.763163] cpufreq: delete arm freq(1608000)
  205. [3.043549 0.021553] [ 0.799600] rk3188 cpufreq version 2.2, suspend freq 816 MHz
  206. [3.044210 0.000661] [ 0.799836] VPU_SERVICE: failed on clk_get pd_video
  207. [3.044723 0.000513] [ 0.799865] VPU_SERVICE: failed on clk_get aclk_ddr_vepu
  208. [3.045282 0.000559] [ 0.799881] VPU_SERVICE: failed on clk_get hclk_cpu_vcodec
  209. [3.045862 0.000580] [ 0.799891] vpu: power on
  210. [3.049398 0.003536] [ 0.799936] VPU_SERVICE: checking hw id 4831
  211. [3.066551 0.017153] [ 0.828133] vpu: power off...done
  212. [3.066957 0.000406] [ 0.828165] VPU_SERVICE: init success
  213. [3.067372 0.000415] [ 0.828427] audit: initializing netlink socket (disabled)
  214. [3.067936 0.000564] [ 0.828468] type=2000 audit(0.750:1): initialized
  215. [3.074174 0.006238] [ 0.845320] highmem bounce pool size: 64 pages
  216. [3.074734 0.000560] [ 0.845477] ashmem: initialized
  217. [3.085426 0.010692] [ 0.856459] fuse init (API version 7.16)
  218. [3.085900 0.000474] [ 0.856677] msgmni has been set to 918
  219. [3.106426 0.020526] [ 0.864775] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  220. [3.107260 0.000834] [ 0.864790] io scheduler noop registered
  221. [3.107702 0.000442] [ 0.864796] io scheduler deadline registered
  222. [3.108150 0.000448] [ 0.864839] io scheduler cfq registered (default)
  223. [3.129552 0.021402] [ 0.885172] rga: Driver loaded succesfully
  224. [3.130041 0.000489] [ 0.885358] rk_serial.c v1.6 2013-12-23
  225. [3.130442 0.000401] [ 0.885430] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
  226. [3.131205 0.000763] [ 0.885542] rk_serial rk_serial.0: membase 0xdf048000
  227. [3.131762 0.000557] [ 0.885584] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
  228. [3.152163 0.020401] [ 0.885685] rk_serial rk_serial.3: membase 0xdf050000
  229. [3.152698 0.000535] [ 0.885892] Rockchip ion module(version: 1.0) is successfully loaded
  230. [3.153361 0.000663] [ 0.887702] loop: module loaded
  231. [3.153690 0.000329] [ 0.888355] Read the Ethernet MAC address from IDB:00:16:00:00:00:42
  232. [3.174032 0.020342] [ 0.888376] eth_mac_from_idb***********:0:16:0:0:0:42
  233. [3.174579 0.000547] [ 0.888656] rk29 vmac rk29 vmac.0: ARC VMAC at 0x10204000 irq 51 00:16:00:00:00:42
  234. [3.175420 0.000841] [ 0.888669] enter rk30_rmii_io_init
  235. [3.175801 0.000381] [ 0.888732] PPP generic driver version 2.4.2
  236. [3.185075 0.009274] [ 0.888902] PPP Deflate Compression module registered
  237. [3.185619 0.000544] [ 0.888911] PPP BSD Compression module registered
  238. [3.210569 0.024950] modprobe: FATAL: Could not load /lib/modules/3.0.36+/modules.dep: No such file or directory
  239. [3.211528 0.000959]
  240. [3.211547 0.000019] modprobe: FATAL: Could not load /lib/modules/3.0.36+/modules.dep: No such file or directory
  241. [3.212407 0.000860]
  242. [3.212423 0.000016] [ 0.980898] PPP MPPE Compression module registered
  243. [3.212923 0.000500] [ 0.980913] NET: Registered protocol family 24
  244. [3.232993 0.020070] [ 0.980922] tun: Universal TUN/TAP device driver, 1.6
  245. [3.233534 0.000541] [ 0.980928] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  246. [3.234187 0.000653] [ 0.981144] usbcore: registered new interface driver asix
  247. [3.234754 0.000567] [ 0.981162] Rockchip WiFi SYS interface (V1.00) ...
  248. [3.255935 0.021181] [ 0.981203] Initializing USB Mass Storage driver...
  249. [3.256452 0.000517] [ 0.981240] usbcore: registered new interface driver usb-storage
  250. [3.257081 0.000629] [ 0.981246] USB Mass Storage support registered.
  251. [3.257563 0.000482] [ 0.981336] usbcore: registered new interface driver usbserial
  252. [3.277878 0.020315] [ 0.981364] USB Serial support registered for generic
  253. [3.278424 0.000546] [ 0.981398] usbcore: registered new interface driver usbserial_generic
  254. [3.279112 0.000688] [ 0.981404] usbserial: USB Serial Driver core
  255. [3.279601 0.000489] [ 0.981426] USB Serial support registered for GSM modem (1-port)
  256. [3.289181 0.009580] [ 0.981458] usbcore: registered new interface driver option
  257. [3.289780 0.000599] [ 0.981464] option: v0.7.2:USB Driver for GSM modems
  258. [3.446568 0.156788] [ 1.203020] usb20_otg usb20_otg: DWC OTG Controller
  259. [3.447163 0.000595] [ 1.203100] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
  260. [3.448707 0.001544] [ 1.203127] usb20_otg usb20_otg: irq 48, io mem 0x00000000
  261. [3.449945 0.001238] [ 1.203192] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  262. [3.470205 0.020260] [ 1.203202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  263. [3.471824 0.001619] [ 1.203210] usb usb1: Product: DWC OTG Controller
  264. [3.472755 0.000931] [ 1.203216] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
  265. [3.473884 0.001129] [ 1.203222] usb usb1: SerialNumber: usb20_otg
  266. [3.478748 0.004864] [ 1.203532] hub 1-0:1.0: USB hub found
  267. [3.479550 0.000802] [ 1.203545] hub 1-0:1.0: 1 port detected
  268. [3.660648 0.181098] [ 1.416300] usb20_host usb20_host: DWC OTG Controller
  269. [3.661620 0.000972] [ 1.416337] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  270. [3.662838 0.001218] [ 1.416359] usb20_host usb20_host: irq 49, io mem 0x00000000
  271. [3.663814 0.000976] [ 1.416426] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  272. [3.683390 0.019576] [ 1.416435] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  273. [3.684398 0.001008] [ 1.416443] usb usb2: Product: DWC OTG Controller
  274. [3.685048 0.000650] [ 1.416449] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
  275. [3.685820 0.000772] [ 1.416455] usb usb2: SerialNumber: usb20_host
  276. [3.705002 0.019182] [ 1.416704] hub 2-0:1.0: USB hub found
  277. [3.705527 0.000525] [ 1.416716] hub 2-0:1.0: 1 port detected
  278. [3.706065 0.000538] [ 1.417011] rk29-keypad: probe of rk29-keypad failed with error -22
  279. [3.706924 0.000859] [ 1.417039] AR1020 I2C: ar1020_i2c_init: begin
  280. [3.707562 0.000638] [ 1.417116] ===================================================
  281. [3.724340 0.016778] [ 1.417123] Rockchip IR remote controller driver. Version 1.0.0
  282. [3.725102 0.000762] [ 1.417128] ===================================================
  283. [3.725857 0.000755] [ 1.417133] ++++++++remotectl_init
  284. [3.748581 0.022724] [ 1.504200] using rtc device, rtc_hym8563, for alarms
  285. [3.749172 0.000591] [ 1.504231] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
  286. [3.749878 0.000706] [ 1.504262] i2c /dev entries driver
  287. [3.750247 0.000369] [ 1.504673] Linux video capture interface: v2.00
  288. [3.750733 0.000486] [ 1.504857] usbcore: registered new interface driver uvcvideo
  289. [3.771420 0.020687] [ 1.504864] USB Video Class driver (v1.1.0)
  290. [3.771871 0.000451] [ 1.505379] device-mapper: uevent: version 1.0.3
  291. [3.772358 0.000487] [ 1.505573] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  292. [3.773251 0.000893] [ 1.505763] cpuidle: using governor ladder
  293. [3.793128 0.019877] [ 1.505770] cpuidle: using governor menu
  294. [3.793548 0.000420] [ 1.510439] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
  295. [3.794023 0.000475] [ 1.511577] uboot: 0x000400000 -- 0x000800000 (4 MB)
  296. [3.794594 0.000571] [ 1.511587] misc: 0x000800000 -- 0x000c00000 (4 MB)
  297. [3.795163 0.000569] [ 1.511594] kernel: 0x000c00000 -- 0x001800000 (12 MB)
  298. [3.815134 0.019971] [ 1.511601] boot: 0x001800000 -- 0x002400000 (12 MB)
  299. [3.815752 0.000618] [ 1.511608] system: 0x002c00000 -- 0x0e8c00000 (3680 MB)
  300. [3.816346 0.000594] [ 1.511622] mmcblk0: p1 p2 p3 p4 p5
  301. [3.816719 0.000373] [ 1.557543] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sd_mmc]
  302. [3.837296 0.020577] [ 1.557556]
  303. [3.837461 0.000165] [ 1.557558] drivers/mmc/core/core.c...2019.. ===== mmc_rescan Begin....[mmc1]
  304. [3.838212 0.000751] [ 1.557564]
  305. [3.838369 0.000157] [ 1.557566] =================
  306. [3.838681 0.000312] [ 1.557567] sdmmc_rescan..2026.. ====find no SDMMC host. [mmc1]
  307. [3.859873 0.021192] [ 1.557694] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sdio]
  308. [3.860824 0.000951] [ 1.557701]
  309. [3.860984 0.000160] [ 1.557702] drivers/mmc/core/core.c...2019.. ===== mmc_rescan Begin....[mmc2]
  310. [3.861745 0.000761] [ 1.557759] Skipping unavailable LED gpio -1 (button-backlight)
  311. [3.882678 0.020933] [ 1.558999] usbcore: registered new interface driver usbhid
  312. [3.883643 0.000965] [ 1.559007] usbhid: USB HID core driver
  313. [3.884052 0.000409] [ 1.559263] zram: Created 1 device(s) ...
  314. [3.884475 0.000423] [ 1.559855] es8323 probe i2c recv ok
  315. [3.884852 0.000377] [ 1.559938] i2c-core: driver [ES8323] using legacy suspend method
  316. [3.904167 0.019315] [ 1.559945] i2c-core: driver [ES8323] using legacy resume method
  317. [3.904804 0.000637] [ 1.570418] rk29_sdmmc_change_clk_div..1684.. newDiv=42, newCLK=294Khz [sdio]
  318. [3.905568 0.000764] [ 1.580139] ES8323 audio_card_init
  319. [3.905927 0.000359] [ 1.580145] XXXXEnter::audio_card_init----215
  320. [3.909909 0.003982] [ 1.580294] es8323_probe
  321. [4.098523 0.188614] [ 1.870467] usb 2-1: new high speed USB device number 2 using usb20_host
  322. [4.325622 0.227099] [ 2.081994] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
  323. [4.326549 0.000927] [ 2.082012] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  324. [4.327572 0.001023] [ 2.082026] usb 2-1: Product: USB2.0 Hub
  325. [4.328452 0.000880] [ 2.082660] hub 2-1:1.0: USB hub found
  326. [4.329292 0.000840] [ 2.082970] hub 2-1:1.0: 4 ports detected
  327. [4.474664 0.145372] [ 2.230822] ES8323 4-0010: asoc: no dapm match for LINPUT1 --> NULL --> Left Line Mux
  328. [4.476488 0.001824] [ 2.230842] ES8323 4-0010: Failed to add route LINPUT1->Left Line Mux
  329. [4.477782 0.001294] [ 2.230890] Enter::rk29_es8323_init----142
  330. [4.478602 0.000820] [ 2.240052] asoc: ES8323 HiFi <-> rk29_i2s.1 mapping ok
  331. [4.496956 0.018354] [ 2.240399] ALSA device list:
  332. [4.497450 0.000494] [ 2.240406] #0: RK29_ES8323
  333. [4.497929 0.000479] [ 2.240501] GACT probability NOT on
  334. [4.498492 0.000563] [ 2.240513] Mirror/redirect action on
  335. [4.499084 0.000592] [ 2.240519] u32 classifier
  336. [4.499588 0.000504] [ 2.240523] Actions configured
  337. [4.500141 0.000553] [ 2.240530] Netfilter messages via NETLINK v0.30.
  338. [4.520170 0.020029] [ 2.240574] nf_conntrack version 0.5.0 (13622 buckets, 54488 max)
  339. [4.521092 0.000922] [ 2.240854] ctnetlink v0.93: registering with nfnetlink.
  340. [4.521884 0.000792] [ 2.240886] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  341. [4.522915 0.001031] [ 2.240893] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  342. [4.542188 0.019273] [ 2.241156] xt_time: kernel timezone is -0000
  343. [4.542655 0.000467] [ 2.241292] ip_tables: (C) 2000-2006 Netfilter Core Team
  344. [4.543219 0.000564] [ 2.241430] arp_tables: (C) 2002 David S. Miller
  345. [4.543739 0.000520] [ 2.241475] TCP cubic registered
  346. [4.563619 0.019880] [ 2.241480] Initializing XFRM netlink socket
  347. [4.564125 0.000506] [ 2.241824] NET: Registered protocol family 10
  348. [4.564593 0.000468] [ 2.242426] Mobile IPv6
  349. [4.564848 0.000255] [ 2.242458] ip6_tables: (C) 2000-2006 Netfilter Core Team
  350. [4.565412 0.000564] [ 2.242556] IPv6 over IPv4 tunneling driver
  351. [4.565847 0.000435] [ 2.243100] NET: Registered protocol family 17
  352. [4.585971 0.020124] [ 2.243126] NET: Registered protocol family 15
  353. [4.586443 0.000472] [ 2.243323] Bluetooth: RFCOMM TTY layer initialized
  354. [4.586953 0.000510] [ 2.243343] Bluetooth: RFCOMM socket layer initialized
  355. [4.587519 0.000566] [ 2.243350] Bluetooth: RFCOMM ver 1.11
  356. [4.587914 0.000395] [ 2.243357] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  357. [4.608097 0.020183] [ 2.243364] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  358. [4.608717 0.000620] [ 2.243486] NET: Registered protocol family 35
  359. [4.609180 0.000463] [ 2.243612] [BT_RFKILL]: Enter rfkill_rk_init
  360. [4.609633 0.000453] [ 2.243691] [BT_RFKILL]: Request irq for bt wakeup host
  361. [4.629871 0.020238] [ 2.243710] [BT_RFKILL]: ** disable irq
  362. [4.630284 0.000413] [ 2.270388] [BT_RFKILL]: bt shut off power
  363. [4.630716 0.000432] [ 2.300396] [BT_RFKILL]: bt_default device registered.
  364. [4.631255 0.000539] [ 2.300451] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  365. [4.652686 0.021431] [ 2.300488] Registering SWP/SWPB emulation handler
  366. [4.653205 0.000519] [ 2.360465] ddrfreq: verion 3.2 20131126
  367. [4.653616 0.000411] [ 2.360479] ddrfreq: fix cpu pause bug
  368. [4.654009 0.000393] [ 2.360495] ddrfreq: normal 396MHz video 300MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 198MHz reboot 300MHz
  369. [4.674753 0.020744] [ 2.360717] usb 2-1.1: new high speed USB device number 3 using usb20_host
  370. [4.675514 0.000761] [ 2.376403] rtc_hym8563 1-0051: setting system clock to 2017-05-09 13:54:34 UTC (1494338074)
  371. [4.676400 0.000886] [ 2.376617] Freeing init memory: 180K
  372. [4.676783 0.000383] [ 2.392327] ddrfreq: change freq to 445 MHz when normal
  373. [4.687873 0.011090] Loading, please wait...
  374. [4.715624 0.027751] [ 2.471267] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=b720
  375. [4.716402 0.000778] [ 2.471280] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  376. [4.717184 0.000782] [ 2.471288] usb 2-1.1: Product: 802.11n WLAN Adapter
  377. [4.717707 0.000523] [ 2.471294] usb 2-1.1: Manufacturer: Realtek
  378. [4.720795 0.003088] [ 2.471300] usb 2-1.1: SerialNumber: 00e04c000001
  379. [4.738063 0.017268] [ 2.512478] udevd[92]: starting version 175
  380. [4.741748 0.003685] Begin: Loading essential drivers ... FATAL: Could not load /lib/modules/3.0.36+/modules.dep: No such file or directory
  381. [4.787716 0.045968] FATAL: Could not load /lib/modules/3.0.36+/modules.dep: No such file or directory
  382. [4.826380 0.038664] FATAL: Could not load /lib/modules/3.0.36+/modules.dep: No such file or directory
  383. [4.843006 0.016626] FATAL: Could not load /lib/modules/3.0.36+/modules.dep: No such file or directory
  384. [4.843853 0.000847] done.
  385. [4.848751 0.004898] Begin: Running /scripts/init-premount ... ls: /sys/class/mtd/mtd[0-9]*/name: No such file or directory
  386. [4.867901 0.019150] done.
  387. [4.871252 0.003351] Begin: Mounting root file system ... Begin: Running /scripts/local-premount ... done.
  388. [4.886502 0.015250] FATAL: Could not load /lib/modules/3.0.36+/modules.dep: No such file or directory
  389. [4.944273 0.057771] [ 2.708947] EXT4-fs (mmcblk0p5): recovery completi
  390. [4.944868 0.000595] [R in7096cr] EsT4-fsl(mmtbom p..: mounted filesystem with ordered data mode. Opts: (null)
  391. [4.945737 0.000869] done.
  392. [4.945805 0.000068] done.
  393. [4.950425 0.004620] Begin: Running /scripts/init-bottom ... done.
  394. [5.257522 0.307097] SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.26: No such file or directory
  395. [5.258578 0.001056] INIT: version 2.88 booting
  396. [5.336828 0.078250] [info] Using makefile-style concurrent boot in runlevel S.
  397. [5.700591 0.363763] [....] Starting the hotplug events dispatcher: udevd[ 3.498190] udevd[307]: starting version 175
  398. [5.757808 0.057217] [?25l[?1c7[ ok 8[?25h[?0c.
  399. [5.831800 0.073992] [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone.
  400. [6.026059 0.194259] [ 3.797737] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.16
  401. [6.032807 0.006748] [ 3.804991] rtk_btusb: Register usb char device interface for BT driver
  402. [6.043687 0.010880] [ 3.812179] rtk_btusb: btusb_probe: usb_interface dd2da800, bInterfaceNumber 0, idVendor 0x0bda, idProduct 0x0000
  403. [6.052933 0.009246] [ 3.823792] rtk_btusb: get_fw_table_entry: Product id = 0xb720, fw table entry size 39
  404. [6.058561 0.005628] [ 3.831871] rtk_btusb: btusb_probe: Check bt reset flag 0
  405. [6.064559 0.005998] [ 3.837442] usbcore: registered new interface driver rtk_btusb
  406. [6.078202 0.013643] [....] Waiting for /dev to be fully populated...[ 4.401186] RTL871X: module init start
  407. [6.640600 0.562398] [ 4.404948] RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
  408. [6.641995 0.001395] [ 4.411904] RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
  409. [6.809763 0.167768] [ 4.571104] RTL871X: rtw_ndev_init(wlan0)
  410. [6.810713 0.000950] [ 4.572068] RTL871X: rtw_ndev_init(wlan1)
  411. [6.811546 0.000833] [ 4.572993] usbcore: registered new interface driver rtl8723bu
  412. [6.812508 0.000962] [ 4.573009] RTL871X: module init ret=0
  413. [6.949524 0.137016] [?25l[?1c7[ ok 8[?25h[?0cdone.
  414. [7.239139 0.289615] [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  415. [7.311885 0.072746] [ 5.085233] EXT4-fs (mmcblk0p5): re-mounted. Opts: (null)
  416. [7.503043 0.191158] [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c.
  417. [8.363085 0.860042] [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  418. [8.406574 0.043489] [....] Checking file systems...fsck from util-linux 2.20.1
  419. [8.433426 0.026852] [?25l[?1c7[ ok 8[?25h[?0cdone.
  420. [8.539840 0.106414] [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone.
  421. [8.631562 0.091722] [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  422. [8.804090 0.172528] [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
  423. [8.933987 0.129897] [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone.
  424. [8.936022 0.002035] [....] Configuring network interfaces...[?25l[?1c7[ ok 8[?25h[?0cdone.
  425. [9.197459 0.261437] [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
  426. [9.355525 0.158066] INIT: Entering runlevel: 2
  427. [9.387776 0.032251] [ 7.158313] enter func vmac_open...
  428. [9.388499 0.000723] [ 7.158397] enter rk30_rmii_power_control ,enable = 0 [info] Using makefile-style concurrent boot in runlevel 2.
  429. [9.486488 0.097989] enter rk30_rmii_power_control ,enable = 1 power on phy
  430. [9.586520 0.100032] [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c.
  431. [9.760228 0.173708] [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c.
  432. [9.777744 0.017516] [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c.
  433. [9.778653 0.000909] [....] Starting OpenBSD Secure Shell server: sshd[ 8.284584] vmac_mii_bus: probed
  434. [10.523000 0.744347] [ 8.284712] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
  435. [10.524000 0.001000] [ 8.285106] ADDRCONF(NETDEV_UP): eth0: link is not ready
  436. [10.572517 0.048517] [?25l[?1c7[ ok 8[?25h[?0c.
  437. [11.065368 0.492851] 
  438. [11.065737 0.000369] Debian GNU/Linux 7 embdes ttyFIQ0
  439. [11.066373 0.000636]
  440. [11.066403 0.000030] embdes login: root (automatic login)
  441. [11.149999 0.083596] Last login: Tue May 9 13:53:43 UTC 2017 on ttyFIQ0
  442. [11.151030 0.001031] Linux embdes 3.0.36+ #20 SMP PREEMPT Tue May 9 19:16:28 IST 2017 armv7l
  443. [11.152178 0.001148]
  444. [11.152205 0.000027] The programs included with the Debian GNU/Linux system are free software;
  445. [11.153264 0.001059] the exact distribution terms for each program are described in the
  446. [11.164017 0.010753] individual files in /usr/share/doc/*/copyright.
  447. [11.164512 0.000495]
  448. [11.164530 0.000018] Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  449. [11.165179 0.000649] permitted by applicable law.
  450. [11.246167 0.080988] root@embdes:~# [ 10.280820] PHY: 0:00 - Link is Down
  451. [13.514089 2.267922] [ 11.283043] PHY: 0:00 - Link is Up - 100/Full
  452. [13.515502 0.001413] [ 11.283943] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!