daily pastebin goal
15%
SHARE
TWEET

mr_fixit_debian_rp64

Bullet64 Feb 16th, 2019 73 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. rock@rp64_debian_mr:~$ dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Initializing cgroup subsys cpuset
  4. [    0.000000] Initializing cgroup subsys cpu
  5. [    0.000000] Initializing cgroup subsys cpuacct
  6. [    0.000000] Linux version 4.4.169 (adam@adam-vb) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #3 SMP Thu Jan 10 20:05:09 EST 2019
  7. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  8. [    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  9. [    0.000000] bootconsole [uart0] enabled
  10. [    0.000000] On node 0 totalpages: 523776
  11. [    0.000000]   DMA zone: 8184 pages used for memmap
  12. [    0.000000]   DMA zone: 0 pages reserved
  13. [    0.000000]   DMA zone: 523776 pages, LIFO batch:31
  14. [    0.000000] psci: probing for conduit method from DT.
  15. [    0.000000] psci: PSCIv1.0 detected in firmware.
  16. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  17. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  18. [    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07feee000 s45800 r8192 d32024 u86016
  19. [    0.000000] pcpu-alloc: s45800 r8192 d32024 u86016 alloc=21*4096
  20. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  21. [    0.000000] Detected VIPT I-cache on CPU0
  22. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  23. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515592
  24. [    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=tty3 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 eth1addr= serial=8a0653d7f0214bc cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 video=HDMI-A-1:1920x1080@60 quiet loglevel=3 vga=current
  25. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  26. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  27. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  28. [    0.000000] software IO TLB: mapped [mem 0x7fea6000-0x7fee6000] (0MB)
  29. [    0.000000] Memory: 2035704K/2095104K available (13118K kernel code, 1838K rwdata, 5144K rodata, 1088K init, 787K bss, 59400K reserved, 0K cma-reserved)
  30. [    0.000000] Virtual kernel memory layout:
  31.                    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  32.                    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  33.                      .init : 0xffffff8009260000 - 0xffffff8009370000   (  1088 KB)
  34.                      .text : 0xffffff8008080000 - 0xffffff8008d50000   ( 13120 KB)
  35.                    .rodata : 0xffffff8008d50000 - 0xffffff8009260000   (  5184 KB)
  36.                      .data : 0xffffff8009370000 - 0xffffff800953b808   (  1839 KB)
  37.                    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
  38.                              0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
  39.                    fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
  40.                    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  41.                    memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
  42. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  43. [    0.000000] Hierarchical RCU implementation.
  44. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  45. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  46. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  47. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  48. [    0.000000] GIC: Using split EOI/Deactivate mode
  49. [    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  50. [    0.000000] ITS: allocated 65536 Devices @300000 (psz 64K, shr 0)
  51. [    0.000000] ITS: using cache flushing for cmd queue
  52. [    0.000000] GIC: using LPI property table @0x0000000000290000
  53. [    0.000000] ITS: Allocated 1792 chunks for LPIs
  54. [    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  55. [    0.000000] CPU0: using LPI pending table @0x00000000002a0000
  56. [    0.000000] GIC: using cache flushing for LPI property table
  57. [    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  58. [    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  59. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  64. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  65. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  66. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  67. [    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  68. [    0.001406] Console: colour dummy device 80x25
  69. [    0.001418] console [tty3] enabled
  70. [    0.001427] bootconsole [uart0] disabled
  71. [    0.001451] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  72. [    0.001464] pid_max: default: 32768 minimum: 301
  73. [    0.001614] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  74. [    0.001626] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  75. [    0.002362] Initializing cgroup subsys devices
  76. [    0.002379] Initializing cgroup subsys freezer
  77. [    0.002410] ftrace: allocating 47085 entries in 184 pages
  78. [    0.124905] sched-energy: Sched-energy-costs installed from DT
  79. [    0.124924] CPU0: update cpu_capacity 401
  80. [    0.124985] ASID allocator initialised with 32768 entries
  81. [    0.128182] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  82. [    0.128694] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  83. [    0.130058] Detected VIPT I-cache on CPU1
  84. [    0.130092] CPU1: found redistributor 1 region 0:0x00000000fef20000
  85. [    0.130120] CPU1: using LPI pending table @0x000000007d130000
  86. [    0.130164] CPU1: update cpu_capacity 401
  87. [    0.130168] CPU1: Booted secondary processor [410fd034]
  88. [    0.130719] Detected VIPT I-cache on CPU2
  89. [    0.130740] CPU2: found redistributor 2 region 0:0x00000000fef40000
  90. [    0.130767] CPU2: using LPI pending table @0x000000007d160000
  91. [    0.130794] CPU2: update cpu_capacity 401
  92. [    0.130798] CPU2: Booted secondary processor [410fd034]
  93. [    0.131329] Detected VIPT I-cache on CPU3
  94. [    0.131349] CPU3: found redistributor 3 region 0:0x00000000fef60000
  95. [    0.131375] CPU3: using LPI pending table @0x000000007d1b0000
  96. [    0.131401] CPU3: update cpu_capacity 401
  97. [    0.131405] CPU3: Booted secondary processor [410fd034]
  98. [    0.131927] Detected PIPT I-cache on CPU4
  99. [    0.131955] CPU4: found redistributor 100 region 0:0x00000000fef80000
  100. [    0.131994] CPU4: using LPI pending table @0x000000007d1e0000
  101. [    0.132031] CPU4: update cpu_capacity 1024
  102. [    0.132034] CPU4: Booted secondary processor [410fd082]
  103. [    0.132578] Detected PIPT I-cache on CPU5
  104. [    0.132596] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  105. [    0.132633] CPU5: using LPI pending table @0x000000007d210000
  106. [    0.132660] CPU5: update cpu_capacity 1024
  107. [    0.132663] CPU5: Booted secondary processor [410fd082]
  108. [    0.132750] Brought up 6 CPUs
  109. [    0.132834] SMP: Total of 6 processors activated.
  110. [    0.132843] CPU features: detected feature: GIC system register CPU interface
  111. [    0.132850] CPU features: detected feature: 32-bit EL0 Support
  112. [    0.132862] CPU: All CPU(s) started at EL2
  113. [    0.132908] alternatives: patching kernel code
  114. [    0.134320] devtmpfs: initialized
  115. [    0.150855] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  116. [    0.150881] futex hash table entries: 2048 (order: 5, 131072 bytes)
  117. [    0.151373] pinctrl core: initialized pinctrl subsystem
  118. [    0.151603] regulator-dummy: no parameters
  119. [    0.153383] NET: Registered protocol family 16
  120. [    0.159056] cpuidle: using governor ladder
  121. [    0.163065] cpuidle: using governor menu
  122. [    0.163672] vdso: 2 pages (1 code @ ffffff8008d56000, 1 data @ ffffff8009374000)
  123. [    0.163705] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  124. [    0.164251] DMA: preallocated 1024 KiB pool for atomic allocations
  125. [    0.179377] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
  126. [    0.179453] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
  127. [    0.179522] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
  128. [    0.179593] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
  129. [    0.179661] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
  130. [    0.220558] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]'
  131. [    0.220589] dc_12v: 12000 mV
  132. [    0.220754] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
  133. [    0.220982] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0)
  134. [    0.221027] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
  135. [    0.221074] vcc3v3_pcie: supplied by dc_12v
  136. [    0.221083] dc_12v: could not add device link regulator.2 err -2
  137. [    0.221125] vcc3v3_pcie: 3300 mV
  138. [    0.221278] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
  139. [    0.221329] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-s0[0]'
  140. [    0.221344] vcc1v8_s0: 1800 mV
  141. [    0.221493] reg-fixed-voltage vcc1v8-s0: vcc1v8_s0 supplying 1800000uV
  142. [    0.221557] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-sdio[0]'
  143. [    0.221575] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  144. [    0.221589] vcc1v8_sdio: unable to resolve supply
  145. [    0.221597] vcc1v8_sdio: 1800 mV
  146. [    0.221716] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  147. [    0.221730] vcc1v8_sdio: regulator get failed, ret=-517
  148. [    0.221740] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  149. [    0.221752] vcc1v8_sdio: unable to resolve supply
  150. [    0.221760] reg-fixed-voltage vcc1v8-sdio: vcc1v8_sdio supplying 1800000uV
  151. [    0.221864] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-wifi[0]'
  152. [    0.221880] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  153. [    0.221894] vcc1v8_wifi: unable to resolve supply
  154. [    0.221901] vcc1v8_wifi: no parameters
  155. [    0.222020] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  156. [    0.222034] vcc1v8_wifi: regulator get failed, ret=-517
  157. [    0.222044] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  158. [    0.222055] vcc1v8_sdio: unable to resolve supply
  159. [    0.222063] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  160. [    0.222074] vcc1v8_wifi: unable to resolve supply
  161. [    0.222082] reg-fixed-voltage vcc1v8-wifi: vcc1v8_wifi supplying 0uV
  162. [    0.222135] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
  163. [    0.222151] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree
  164. [    0.222185] vcc_sys: supplied by dc_12v
  165. [    0.222193] dc_12v: could not add device link regulator.6 err -2
  166. [    0.222220] vcc_sys: 5000 mV
  167. [    0.222374] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  168. [    0.222389] vcc1v8_sdio: unable to resolve supply
  169. [    0.222396] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  170. [    0.222408] vcc1v8_wifi: unable to resolve supply
  171. [    0.222417] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
  172. [    0.222469] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
  173. [    0.222483] vcc_phy: no parameters
  174. [    0.222635] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  175. [    0.222650] vcc1v8_sdio: unable to resolve supply
  176. [    0.222658] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  177. [    0.222671] vcc1v8_wifi: unable to resolve supply
  178. [    0.222681] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
  179. [    0.222729] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
  180. [    0.222744] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
  181. [    0.222780] vcc3v3_sys: supplied by vcc_sys
  182. [    0.222788] vcc_sys: could not add device link regulator.8 err -2
  183. [    0.222818] vcc3v3_sys: 3300 mV
  184. [    0.222970] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  185. [    0.222985] vcc1v8_sdio: unable to resolve supply
  186. [    0.222993] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  187. [    0.223006] vcc1v8_wifi: unable to resolve supply
  188. [    0.223016] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  189. [    0.223146] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
  190. [    0.223185] vcc5v0_host: no parameters
  191. [    0.223332] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  192. [    0.223348] vcc1v8_sdio: unable to resolve supply
  193. [    0.223355] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  194. [    0.223369] vcc1v8_wifi: unable to resolve supply
  195. [    0.223379] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  196. [    0.224023] iommu: Adding device ff650000.vpu_service to group 0
  197. [    0.224104] iommu: Adding device ff660000.rkvdec to group 1
  198. [    0.224181] iommu: Adding device ff670000.iep to group 2
  199. [    0.224293] iommu: Adding device ff8f0000.vop to group 3
  200. [    0.224381] iommu: Adding device ff900000.vop to group 4
  201. [    0.225194] rk_iommu ff670800.iommu: can't get aclk
  202. [    0.225204] rk_iommu ff670800.iommu: can't get hclk
  203. [    0.225914] SCSI subsystem initialized
  204. [    0.226087] libata version 3.00 loaded.
  205. [    0.226291] usbcore: registered new interface driver usbfs
  206. [    0.226335] usbcore: registered new interface driver hub
  207. [    0.226423] usbcore: registered new device driver usb
  208. [    0.226499] media: Linux media interface: v0.10
  209. [    0.226531] Linux video capture interface: v2.00
  210. [    0.226618] pps_core: LinuxPPS API ver. 1 registered
  211. [    0.226624] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  212. [    0.226642] PTP clock support registered
  213. [    0.227746] Advanced Linux Sound Architecture Driver Initialized.
  214. [    0.228240] Bluetooth: Core ver 2.21
  215. [    0.228278] NET: Registered protocol family 31
  216. [    0.228284] Bluetooth: HCI device and connection manager initialized
  217. [    0.228296] Bluetooth: HCI socket layer initialized
  218. [    0.228305] Bluetooth: L2CAP socket layer initialized
  219. [    0.228329] Bluetooth: SCO socket layer initialized
  220. [    0.229721] clocksource: Switched to clocksource arch_sys_counter
  221. [    0.279146] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  222. [    0.279405] NET: Registered protocol family 2
  223. [    0.279843] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  224. [    0.279958] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  225. [    0.280288] TCP: Hash tables configured (established 16384 bind 16384)
  226. [    0.280371] UDP hash table entries: 1024 (order: 4, 98304 bytes)
  227. [    0.280431] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
  228. [    0.280692] NET: Registered protocol family 1
  229. [    0.281053] RPC: Registered named UNIX socket transport module.
  230. [    0.281067] RPC: Registered udp transport module.
  231. [    0.281072] RPC: Registered tcp transport module.
  232. [    0.281078] RPC: Registered tcp NFSv4.1 backchannel transport module.
  233. [    0.281308] PCI: CLS 0 bytes, default 64
  234. [    0.282662] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  235. [    0.282775] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  236. [    0.285919] Initialise system trusted keyring
  237. [    0.293956] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  238. [    0.294703] NFS: Registering the id_resolver key type
  239. [    0.294750] Key type id_resolver registered
  240. [    0.294756] Key type id_legacy registered
  241. [    0.294833] fuse init (API version 7.23)
  242. [    0.295198] SGI XFS with security attributes, no debug enabled
  243. [    0.299969] NET: Registered protocol family 38
  244. [    0.299991] Key type asymmetric registered
  245. [    0.300001] Asymmetric key parser 'x509' registered
  246. [    0.300155] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  247. [    0.300167] io scheduler noop registered
  248. [    0.300176] io scheduler deadline registered
  249. [    0.300295] io scheduler cfq registered (default)
  250. [    0.301289] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
  251. [    0.301302] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  252. [    0.301582] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply from device tree
  253. [    0.301593] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  254. [    0.301608] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator
  255. [    0.301761] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
  256. [    0.301853] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.1 err -2
  257. [    0.303297] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
  258. [    0.303309] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  259. [    0.304372] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
  260. [    0.304383] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
  261. [    0.304477] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
  262. [    0.304486] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
  263. [    0.306744] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree
  264. [    0.306758] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed
  265. [    0.306774] rk-vcodec ff650000.vpu_service: no regulator for vcodec
  266. [    0.307013] rk-vcodec ff650000.vpu_service: probe device
  267. [    0.307228] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
  268. [    0.307777] rk-vcodec ff650000.vpu_service: init success
  269. [    0.307987] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree
  270. [    0.307998] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed
  271. [    0.308013] rk-vcodec ff660000.rkvdec: no regulator for vcodec
  272. [    0.308421] rk-vcodec ff660000.rkvdec: probe device
  273. [    0.308609] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
  274. [    0.308999] rk-vcodec ff660000.rkvdec: could not find power_model node
  275. [    0.309007] rk-vcodec ff660000.rkvdec: init success
  276. [    0.310483] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  277. [    0.310494] dma-pl330 ff6d0000.dma-controller:   DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  278. [    0.311947] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  279. [    0.311957] dma-pl330 ff6e0000.dma-controller:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  280. [    0.312364] pwm-regulator vdd-log: GPIO lookup for consumer enable
  281. [    0.312372] pwm-regulator vdd-log: using device tree for GPIO lookup
  282. [    0.312382] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
  283. [    0.312391] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
  284. [    0.312399] pwm-regulator vdd-log: using lookup tables for GPIO lookup
  285. [    0.312407] pwm-regulator vdd-log: lookup for GPIO enable failed
  286. [    0.312430] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  287. [    0.312509] pwm-regulator: supplied by vcc_sys
  288. [    0.312518] vcc_sys: could not add device link regulator.10 err -2
  289. [    0.312605] vdd_log: 800 <--> 1400 mV at 896 mV
  290. [    0.312811] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  291. [    0.312830] vcc1v8_sdio: unable to resolve supply
  292. [    0.312839] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  293. [    0.312854] vcc1v8_wifi: unable to resolve supply
  294. [    0.313286] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  295. [    0.314974] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
  296. [    0.315583] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
  297. [    0.316696] [drm] Initialized drm 1.1.0 20060810
  298. [    0.320685] [drm] Rockchip DRM driver version: v1.0.1
  299. [    0.321227] usbcore: registered new interface driver udl
  300. [    0.322777] Unable to detect cache hierarchy for CPU 0
  301. [    0.323548] brd: module loaded
  302. [    0.328907] loop: module loaded
  303. [    0.329472] zram: Added device: zram0
  304. [    0.329851] lkdtm: No crash points registered, enable through debugfs
  305. [    0.331145] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  306. [    0.332792] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
  307. [    0.332877] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  308. [    0.332888] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  309. [    0.332897] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  310. [    0.332918] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  311. [    0.333086] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  312. [    0.338099] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  313. [    0.338225] stmmac - user ID: 0x10, Synopsys ID: 0x35
  314. [    0.338230]  Ring mode enabled
  315. [    0.338235]  DMA HW capability register supported
  316. [    0.338240]  Normal descriptors
  317. [    0.338246]  RX Checksum Offload Engine supported (type 2)
  318. [    0.338250]  TX Checksum insertion supported
  319. [    0.338255]  Wake-Up On Lan supported
  320. [    0.338291]  Enable RX Mitigation via HW Watchdog Timer
  321. [    0.338394] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
  322. [    0.403039] libphy: stmmac: probed
  323. [    0.403049] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  324. [    0.403057] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  325. [    0.404252] Atmel at76x USB Wireless LAN Driver 0.17 loading
  326. [    0.404310] usbcore: registered new interface driver at76c50x-usb
  327. [    0.404368] Broadcom 43xx driver loaded [ Features: PNL ]
  328. [    0.404587] usbcore: registered new interface driver zd1211rw
  329. [    0.404634] usbcore: registered new interface driver rtl8187
  330. [    0.404691] usbcore: registered new interface driver rtl8192cu
  331. [    0.404764] usbcore: registered new interface driver rtl8xxxu
  332. [    0.404814] usbcore: registered new interface driver rndis_wlan
  333. [    0.404870] usbcore: registered new interface driver usb8xxx
  334. [    0.405077] usbcore: registered new interface driver rt2500usb
  335. [    0.405126] usbcore: registered new interface driver rt73usb
  336. [    0.405174] usbcore: registered new interface driver rt2800usb
  337. [    0.405212] usbcore: registered new interface driver mt7601u
  338. [    0.405349] usbcore: registered new interface driver ath6kl_usb
  339. [    0.405388] usbcore: registered new interface driver ar5523
  340. [    0.405586] usbcore: registered new interface driver mwifiex_usb
  341. [    0.405663] usbcore: registered new interface driver brcmfmac
  342. [    0.405679] Rockchip WiFi SYS interface (V1.00) ...
  343. [    0.405770] usbcore: registered new interface driver rtl8150
  344. [    0.405810] usbcore: registered new interface driver r8152
  345. [    0.405856] usbcore: registered new interface driver asix
  346. [    0.405899] usbcore: registered new interface driver ax88179_178a
  347. [    0.405938] usbcore: registered new interface driver cdc_ether
  348. [    0.405978] usbcore: registered new interface driver rndis_host
  349. [    0.406042] usbcore: registered new interface driver cdc_ncm
  350. [    0.406081] usbcore: registered new interface driver cdc_mbim
  351. [    0.407443] rockchip-dwc3 usb0: failed to get drvdata dwc3
  352. [    0.412232] rockchip-dwc3 usb1: fail to get drvdata hcd
  353. [    0.413465] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  354. [    0.413484] ehci-pci: EHCI PCI platform driver
  355. [    0.413543] ehci-platform: EHCI generic platform driver
  356. [    0.417407] ehci-platform fe3c0000.usb: EHCI Host Controller
  357. [    0.417603] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
  358. [    0.417729] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
  359. [    0.423750] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  360. [    0.423912] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  361. [    0.423922] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  362. [    0.423930] usb usb1: Product: EHCI Host Controller
  363. [    0.423938] usb usb1: Manufacturer: Linux 4.4.169 ehci_hcd
  364. [    0.423945] usb usb1: SerialNumber: fe3c0000.usb
  365. [    0.424459] hub 1-0:1.0: USB hub found
  366. [    0.424489] hub 1-0:1.0: 1 port detected
  367. [    0.425065] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  368. [    0.425085] ohci-platform: OHCI generic platform driver
  369. [    0.425559] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  370. [    0.425753] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
  371. [    0.425835] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
  372. [    0.480892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  373. [    0.480901] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  374. [    0.480909] usb usb2: Product: Generic Platform OHCI controller
  375. [    0.480916] usb usb2: Manufacturer: Linux 4.4.169 ohci_hcd
  376. [    0.480923] usb usb2: SerialNumber: fe3e0000.usb
  377. [    0.481590] hub 2-0:1.0: USB hub found
  378. [    0.481636] hub 2-0:1.0: 1 port detected
  379. [    0.483278] usbcore: registered new interface driver cdc_wdm
  380. [    0.483350] usbcore: registered new interface driver uas
  381. [    0.483474] usbcore: registered new interface driver usb-storage
  382. [    0.483527] usbcore: registered new interface driver ums-alauda
  383. [    0.483579] usbcore: registered new interface driver ums-cypress
  384. [    0.483633] usbcore: registered new interface driver ums-datafab
  385. [    0.483685] usbcore: registered new interface driver ums_eneub6250
  386. [    0.483761] usbcore: registered new interface driver ums-freecom
  387. [    0.483816] usbcore: registered new interface driver ums-isd200
  388. [    0.483869] usbcore: registered new interface driver ums-jumpshot
  389. [    0.483922] usbcore: registered new interface driver ums-karma
  390. [    0.483974] usbcore: registered new interface driver ums-onetouch
  391. [    0.484038] usbcore: registered new interface driver ums-realtek
  392. [    0.484096] usbcore: registered new interface driver ums-sddr09
  393. [    0.484150] usbcore: registered new interface driver ums-sddr55
  394. [    0.484206] usbcore: registered new interface driver ums-usbat
  395. [    0.484315] usbcore: registered new interface driver usbserial
  396. [    0.484365] usbcore: registered new interface driver usbserial_generic
  397. [    0.484402] usbserial: USB Serial support registered for generic
  398. [    0.484459] usbcore: registered new interface driver cp210x
  399. [    0.484494] usbserial: USB Serial support registered for cp210x
  400. [    0.484571] usbcore: registered new interface driver ftdi_sio
  401. [    0.484610] usbserial: USB Serial support registered for FTDI USB Serial Device
  402. [    0.484777] usbcore: registered new interface driver keyspan
  403. [    0.484814] usbserial: USB Serial support registered for Keyspan - (without firmware)
  404. [    0.484849] usbserial: USB Serial support registered for Keyspan 1 port adapter
  405. [    0.484884] usbserial: USB Serial support registered for Keyspan 2 port adapter
  406. [    0.484919] usbserial: USB Serial support registered for Keyspan 4 port adapter
  407. [    0.484979] usbcore: registered new interface driver option
  408. [    0.485018] usbserial: USB Serial support registered for GSM modem (1-port)
  409. [    0.485208] usbcore: registered new interface driver oti6858
  410. [    0.485244] usbserial: USB Serial support registered for oti6858
  411. [    0.485304] usbcore: registered new interface driver pl2303
  412. [    0.485340] usbserial: USB Serial support registered for pl2303
  413. [    0.485402] usbcore: registered new interface driver qcserial
  414. [    0.485438] usbserial: USB Serial support registered for Qualcomm USB modem
  415. [    0.485514] usbcore: registered new interface driver sierra
  416. [    0.485550] usbserial: USB Serial support registered for Sierra USB modem
  417. [    0.486651] usbcore: registered new interface driver iforce
  418. [    0.486756] usbcore: registered new interface driver xpad
  419. [    0.487193] usbcore: registered new interface driver usbtouchscreen
  420. [    0.488144] i2c /dev entries driver
  421. [    0.489420] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
  422. [    0.489432] fan53555-regulator 0-0040: using device tree for GPIO lookup
  423. [    0.489475] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
  424. [    0.489898] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  425. [    0.489922] fan53555-regulator 0-0040: Looking up vin-supply from device tree
  426. [    0.490011] fan53555-reg: supplied by vcc_sys
  427. [    0.490024] vcc_sys: could not add device link regulator.11 err -2
  428. [    0.491188] vdd_cpu_b: 712 <--> 1500 mV at 825 mV
  429. [    0.491637] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  430. [    0.491660] vcc1v8_sdio: unable to resolve supply
  431. [    0.491673] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  432. [    0.491692] vcc1v8_wifi: unable to resolve supply
  433. [    0.492026] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
  434. [    0.492037] fan53555-regulator 0-0041: using device tree for GPIO lookup
  435. [    0.492075] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
  436. [    0.492453] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  437. [    0.492479] fan53555-regulator 0-0041: Looking up vin-supply from device tree
  438. [    0.492542] fan53555-reg: supplied by vcc_sys
  439. [    0.492555] vcc_sys: could not add device link regulator.12 err -2
  440. [    0.493761] vdd_gpu: 712 <--> 1500 mV at 1100 mV
  441. [    0.494189] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  442. [    0.494212] vcc1v8_sdio: unable to resolve supply
  443. [    0.494224] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  444. [    0.494242] vcc1v8_wifi: unable to resolve supply
  445. [    0.494932] rk808 0-001b: Pmic Chip id: 0x0
  446. [    0.497641] rk808 0-001b: GPIO lookup for consumer dvs
  447. [    0.497650] rk808 0-001b: using device tree for GPIO lookup
  448. [    0.497663] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
  449. [    0.497672] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  450. [    0.497680] rk808 0-001b: using lookup tables for GPIO lookup
  451. [    0.497687] rk808 0-001b: lookup for GPIO dvs failed
  452. [    0.497695] rk808-regulator rk808-regulator: there is no dvs0 gpio
  453. [    0.497702] rk808 0-001b: GPIO lookup for consumer dvs
  454. [    0.497732] rk808 0-001b: using device tree for GPIO lookup
  455. [    0.497740] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
  456. [    0.497748] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
  457. [    0.497755] rk808 0-001b: using lookup tables for GPIO lookup
  458. [    0.497762] rk808 0-001b: lookup for GPIO dvs failed
  459. [    0.497770] rk808-regulator rk808-regulator: there is no dvs1 gpio
  460. [    0.497818] rk808 0-001b: Looking up vcc1-supply from device tree
  461. [    0.497884] DCDC_REG1: supplied by vcc_sys
  462. [    0.497894] vcc_sys: could not add device link regulator.13 err -2
  463. [    0.498355] vdd_center: 900 mV
  464. [    0.498571] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  465. [    0.498590] vcc1v8_sdio: unable to resolve supply
  466. [    0.498599] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  467. [    0.498616] vcc1v8_wifi: unable to resolve supply
  468. [    0.498659] rk808 0-001b: Looking up vcc2-supply from device tree
  469. [    0.498695] DCDC_REG2: supplied by vcc_sys
  470. [    0.498704] vcc_sys: could not add device link regulator.14 err -2
  471. [    0.499011] vdd_cpu_l: 750 <--> 1350 mV at 850 mV
  472. [    0.499216] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  473. [    0.499235] vcc1v8_sdio: unable to resolve supply
  474. [    0.499243] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  475. [    0.499259] vcc1v8_wifi: unable to resolve supply
  476. [    0.499299] rk808 0-001b: Looking up vcc3-supply from device tree
  477. [    0.499335] DCDC_REG3: supplied by vcc_sys
  478. [    0.499343] vcc_sys: could not add device link regulator.15 err -2
  479. [    0.499372] vcc_ddr: at 5000 mV
  480. [    0.499547] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  481. [    0.499566] vcc1v8_sdio: unable to resolve supply
  482. [    0.499574] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  483. [    0.499591] vcc1v8_wifi: unable to resolve supply
  484. [    0.499633] rk808 0-001b: Looking up vcc4-supply from device tree
  485. [    0.499668] DCDC_REG4: supplied by vcc_sys
  486. [    0.499676] vcc_sys: could not add device link regulator.16 err -2
  487. [    0.499859] vcc_1v8: 1800 mV
  488. [    0.500057] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  489. [    0.500076] vcc1v8_sdio: supplied by vcc_1v8
  490. [    0.500112] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  491. [    0.500130] vcc1v8_wifi: supplied by vcc_1v8
  492. [    0.500200] rk808 0-001b: Looking up vcc6-supply from device tree
  493. [    0.500236] LDO_REG1: supplied by vcc_sys
  494. [    0.500245] vcc_sys: could not add device link regulator.17 err -2
  495. [    0.501078] vcc1v8_dvp: 1800 mV
  496. [    0.501322] rk808 0-001b: Looking up vcc6-supply from device tree
  497. [    0.501359] LDO_REG2: supplied by vcc_sys
  498. [    0.501367] vcc_sys: could not add device link regulator.18 err -2
  499. [    0.502059] vcc3v0_touch: 3000 mV
  500. [    0.502303] rk808 0-001b: Looking up vcc7-supply from device tree
  501. [    0.502341] LDO_REG3: supplied by vcc_sys
  502. [    0.502349] vcc_sys: could not add device link regulator.19 err -2
  503. [    0.503043] vcc1v8_pmu: 1800 mV
  504. [    0.503290] rk808 0-001b: Looking up vcc9-supply from device tree
  505. [    0.503326] LDO_REG4: supplied by vcc_sys
  506. [    0.503334] vcc_sys: could not add device link regulator.20 err -2
  507. [    0.503508] vcc_sd: Bringing 3300000uV into 3000000-3000000uV
  508. [    0.503630] vcc_sd: ramp_delay not set
  509. [    0.504163] vcc_sd: 1800 <--> 3000 mV at 3000 mV
  510. [    0.504396] rk808 0-001b: Looking up vcc9-supply from device tree
  511. [    0.504431] LDO_REG5: supplied by vcc_sys
  512. [    0.504439] vcc_sys: could not add device link regulator.21 err -2
  513. [    0.505144] vcca3v0_codec: 3000 mV
  514. [    0.505376] rk808 0-001b: Looking up vcc10-supply from device tree
  515. [    0.505411] LDO_REG6: supplied by vcc_sys
  516. [    0.505423] vcc_sys: could not add device link regulator.22 err -2
  517. [    0.506117] vcc_1v5: 1500 mV
  518. [    0.506367] rk808 0-001b: Looking up vcc7-supply from device tree
  519. [    0.506402] LDO_REG7: supplied by vcc_sys
  520. [    0.506410] vcc_sys: could not add device link regulator.23 err -2
  521. [    0.507103] vcca1v8_codec: 1800 mV
  522. [    0.507360] rk808 0-001b: Looking up vcc11-supply from device tree
  523. [    0.507396] LDO_REG8: supplied by vcc_sys
  524. [    0.507404] vcc_sys: could not add device link regulator.24 err -2
  525. [    0.508099] vcc_3v0: 3000 mV
  526. [    0.508358] rk808 0-001b: Looking up vcc8-supply from device tree
  527. [    0.508396] SWITCH_REG1: supplied by vcc3v3_sys
  528. [    0.508404] vcc3v3_sys: could not add device link regulator.25 err -2
  529. [    0.508433] vcc3v3_s3: at 3300 mV
  530. [    0.508652] rk808 0-001b: Looking up vcc12-supply from device tree
  531. [    0.508689] SWITCH_REG2: supplied by vcc3v3_sys
  532. [    0.508696] vcc3v3_sys: could not add device link regulator.26 err -2
  533. [    0.508759] vcc3v3_s0: at 3300 mV
  534. [    0.512110] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  535. [    0.512602] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096d2000
  536. [    0.513496] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80096d4000
  537. [    0.514593] fusb302 4-0022: GPIO lookup for consumer int-n
  538. [    0.514604] fusb302 4-0022: using device tree for GPIO lookup
  539. [    0.514645] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  540. [    0.514677] fusb302 4-0022: GPIO lookup for consumer vbus-5v
  541. [    0.514686] fusb302 4-0022: using device tree for GPIO lookup
  542. [    0.514746] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  543. [    0.514778] fusb302 4-0022: GPIO lookup for consumer vbus-other
  544. [    0.514788] fusb302 4-0022: using device tree for GPIO lookup
  545. [    0.514799] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  546. [    0.514810] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  547. [    0.514820] fusb302 4-0022: using lookup tables for GPIO lookup
  548. [    0.514831] fusb302 4-0022: lookup for GPIO vbus-other failed
  549. [    0.514842] fusb302 4-0022: GPIO lookup for consumer discharge
  550. [    0.514851] fusb302 4-0022: using device tree for GPIO lookup
  551. [    0.514861] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  552. [    0.514872] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  553. [    0.514882] fusb302 4-0022: using lookup tables for GPIO lookup
  554. [    0.514891] fusb302 4-0022: lookup for GPIO discharge failed
  555. [    0.515112] fusb302 4-0022: Can't get property of role, set role to default DRP
  556. [    0.523606] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
  557. [    0.523651] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80096d6000
  558. [    0.525196] lirc_dev: IR Remote Control driver registered, major 241
  559. [    0.525212] IR NEC protocol handler initialized
  560. [    0.525225] IR RC5(x/sz) protocol handler initialized
  561. [    0.525238] IR RC6 protocol handler initialized
  562. [    0.525250] IR JVC protocol handler initialized
  563. [    0.525263] IR Sony protocol handler initialized
  564. [    0.525275] IR SANYO protocol handler initialized
  565. [    0.525288] IR Sharp protocol handler initialized
  566. [    0.525301] IR MCE Keyboard/mouse protocol handler initialized
  567. [    0.525314] IR LIRC bridge handler initialized
  568. [    0.525327] IR XMP protocol handler initialized
  569. [    0.526356] rockchip-rga ff680000.rga: HW Version: 0x03.02
  570. [    0.526803] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  571. [    0.527639] usbcore: registered new interface driver uvcvideo
  572. [    0.527645] USB Video Class driver (1.1.1)
  573. [    0.528248] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  574. [    0.528468] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  575. [    0.528572] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
  576. [    0.528636] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
  577. [    0.528690] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
  578. [    0.530951] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  579. [    0.531112] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  580. [    0.531881] Bluetooth: Virtual HCI driver ver 1.5
  581. [    0.531987] Bluetooth: HCI UART driver ver 2.3
  582. [    0.531996] Bluetooth: HCI UART protocol H4 registered
  583. [    0.532002] Bluetooth: HCI UART protocol ATH3K registered
  584. [    0.532071] usbcore: registered new interface driver bfusb
  585. [    0.532133] usbcore: registered new interface driver btusb
  586. [    0.532145] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1
  587. [    0.532151] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5
  588. [    0.532156] rtk_btusb: Register usb char device interface for BT driver
  589. [    0.532314] usbcore: registered new interface driver rtk_btusb
  590. [    0.532889] cpu cpu0: Failed to get leakage
  591. [    0.532916] cpu cpu0: Looking up cpu-supply from device tree
  592. [    0.533229] cpu cpu4: Failed to get leakage
  593. [    0.533250] cpu cpu4: Looking up cpu-supply from device tree
  594. [    0.533546] cpu cpu0: Looking up cpu-supply from device tree
  595. [    0.533830] cpu cpu0: Looking up cpu-supply from device tree
  596. [    0.536096] cpu cpu4: Looking up cpu-supply from device tree
  597. [    0.539165] sdhci: Secure Digital Host Controller Interface driver
  598. [    0.539168] sdhci: Copyright(c) Pierre Ossman
  599. [    0.539173] Synopsys Designware Multimedia Card Interface Driver
  600. [    0.539580] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  601. [    0.539599] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  602. [    0.539611] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  603. [    0.539634] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  604. [    0.539653] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  605. [    0.539682] /dwmmc@fe310000: could not find phandle
  606. [    0.539686] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
  607. [    0.539704] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  608. [    0.539728] /dwmmc@fe310000: could not find phandle
  609. [    0.539732] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
  610. [    0.539741] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  611. [    0.539743] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  612. [    0.539753] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
  613. [    0.539756] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
  614. [    0.539762] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
  615. [    0.539765] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
  616. [    0.539768] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
  617. [    0.539772] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
  618. [    0.540154] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  619. [    0.540165] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  620. [    0.540174] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  621. [    0.540194] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  622. [    0.540202] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  623. [    0.540206] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
  624. [    0.540210] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
  625. [    0.540220] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
  626. [    0.540263] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  627. [    0.540271] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
  628. [    0.540274] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  629. [    0.540278] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
  630. [    0.540282] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
  631. [    0.540285] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  632. [    0.540288] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
  633. [    0.540292] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
  634. [    0.540294] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  635. [    0.540298] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
  636. [    0.540301] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
  637. [    0.540304] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  638. [    0.540307] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
  639. [    0.540382] vcc_sd: unsupportable voltage range: 3300000-3000000uV
  640. [    0.540391] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  641. [    0.540395] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  642. [    0.550793] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  643. [    0.561792] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  644. [    0.561971] sdhci-pltfm: SDHCI platform and OF driver helper
  645. [    0.562231] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
  646. [    0.562235] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
  647. [    0.562240] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
  648. [    0.562244] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
  649. [    0.562246] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
  650. [    0.562250] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
  651. [    0.563299] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
  652. [    0.563304] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
  653. [    0.563319] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
  654. [    0.563323] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
  655. [    0.563332] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  656. [    0.563335] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  657. [    0.589795] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  658. [    0.590510] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0)
  659. [    0.590652] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0)
  660. [    0.590929] ledtrig-cpu: registered to indicate activity on CPUs
  661. [    0.590991] hidraw: raw HID events driver (C) Jiri Kosina
  662. [    0.592669] usbcore: registered new interface driver usbhid
  663. [    0.592673] usbhid: USB HID core driver
  664. [    0.593537] usbcore: registered new interface driver snd-usb-audio
  665. [    0.594017] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@11[0]'
  666. [    0.594022] es8316 1-0011: Can not read property spk_ctl_gpio
  667. [    0.594035] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@11[0]' - status (0)
  668. [    0.597046] ip_tables: (C) 2000-2006 Netfilter Core Team
  669. [    0.597104] Initializing XFRM netlink socket
  670. [    0.597416] NET: Registered protocol family 10
  671. [    0.597934] NET: Registered protocol family 17
  672. [    0.597948] NET: Registered protocol family 15
  673. [    0.598060] Bluetooth: RFCOMM socket layer initialized
  674. [    0.598072] Bluetooth: RFCOMM ver 1.11
  675. [    0.598079] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  676. [    0.598084] Bluetooth: HIDP socket layer initialized
  677. [    0.598114] lib80211: common routines for IEEE802.11 drivers
  678. [    0.598118] lib80211_crypt: registered algorithm 'NULL'
  679. [    0.598123] [WLAN_RFKILL]: Enter rfkill_wlan_init
  680. [    0.598290] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  681. [    0.598317] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6359sa
  682. [    0.598320] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  683. [    0.598323] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  684. [    0.598327] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
  685. [    0.598331] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
  686. [    0.598334] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
  687. [    0.598351] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
  688. [    0.598354] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
  689. [    0.598360] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  690. [    0.598362] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  691. [    0.598367] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  692. [    0.598389] [BT_RFKILL]: Enter rfkill_rk_init
  693. [    0.598569] [BT_RFKILL]: Enter rfkill_rk_probe
  694. [    0.598581] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
  695. [    0.598585] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
  696. [    0.598589] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
  697. [    0.598598] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  698. [    0.598601] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
  699. [    0.598609] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  700. [    0.598612] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
  701. [    0.598620] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
  702. [    0.598623] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
  703. [    0.598634] [RK808]: clkout2_prepare
  704. [    0.599094] [BT_RFKILL]: init gpio
  705. [    0.599145] [BT_RFKILL]: Request irq for bt wakeup host
  706. [    0.599177] [BT_RFKILL]: ** disable irq
  707. [    0.599183] [BT_RFKILL]: setup rfkill
  708. [    0.599267] [BT_RFKILL]: bt_default device registered.
  709. [    0.599320] Key type dns_resolver registered
  710. [    0.601231] Registered cp15_barrier emulation handler
  711. [    0.601318] Registered setend emulation handler
  712. [    0.602881] Loading compiled-in X.509 certificates
  713. [    0.603605] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree
  714. [    0.603619] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  715. [    0.604180] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply from device tree
  716. [    0.604189] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  717. [    0.604206] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator
  718. [    0.604582] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
  719. [    0.604740] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.6 err -2
  720. [    0.605652] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
  721. [    0.605661] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
  722. [    0.605780] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
  723. [    0.605788] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
  724. [    0.606899] rockchip-drm display-subsystem: dmc is disabled
  725. [    0.607464] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008df0720)
  726. [    0.607667] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008df0720)
  727. [    0.608226] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
  728. [    0.608329] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  729. [    0.609512] Registered IR keymap rc-cec
  730. [    0.609669] input: RC for dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0/input0
  731. [    0.609842] rc0: RC for dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0
  732. [    0.610216] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008de64b8)
  733. [    0.611008] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  734. [    0.611014] cdn-dp fec00000.dp: Falling back to user helper
  735. [    0.611104] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008de74a8)
  736. [    0.611111] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  737. [    0.611116] [drm] No driver support for vblank timestamp query.
  738. [    0.611237] rockchip-drm display-subsystem: failed to parse loader memory
  739. [    0.622799] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  740. [    0.623023] vcc_sd: ramp_delay not set
  741. [    0.623028] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
  742. [    0.639075] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  743. [    0.936746] usb 2-1: new low-speed USB device number 2 using ohci-platform
  744. [    0.958096] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
  745. [    0.981065] dwhdmi-rockchip ff940000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
  746. [    0.981070] dwhdmi-rockchip ff940000.hdmi:     colorspace: RGB
  747. [    0.981073] dwhdmi-rockchip ff940000.hdmi:     scan mode: Underscan
  748. [    0.981076] dwhdmi-rockchip ff940000.hdmi:     colorimetry: No Data
  749. [    0.981080] dwhdmi-rockchip ff940000.hdmi:     picture aspect: 16:9
  750. [    0.981083] dwhdmi-rockchip ff940000.hdmi:     active aspect: Same as Picture
  751. [    0.981087] dwhdmi-rockchip ff940000.hdmi:     itc: IT Content
  752. [    0.981090] dwhdmi-rockchip ff940000.hdmi:     extended colorimetry: xvYCC 601
  753. [    0.981094] dwhdmi-rockchip ff940000.hdmi:     quantization range: Full
  754. [    0.981097] dwhdmi-rockchip ff940000.hdmi:     nups: Unknown Non-uniform Scaling
  755. [    0.981101] dwhdmi-rockchip ff940000.hdmi:     video code: 16
  756. [    0.981104] dwhdmi-rockchip ff940000.hdmi:     ycc quantization range: Full
  757. [    0.981107] dwhdmi-rockchip ff940000.hdmi:     hdmi content type: Graphics
  758. [    0.981110] dwhdmi-rockchip ff940000.hdmi:     pixel repeat: 0
  759. [    0.981115] dwhdmi-rockchip ff940000.hdmi:     bar top 0, bottom 0, left 0, right 0
  760. [    1.063954] Console: switching to colour frame buffer device 240x67
  761. [    1.120825] usb 2-1: New USB device found, idVendor=1113, idProduct=3163
  762. [    1.120829] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  763. [    1.120833] usb 2-1: Product: MEDION MD 86360
  764. [    1.125721] rockchip-drm display-subsystem: fb0:  frame buffer device
  765. [    1.129671] input: MEDION MD 86360 as /devices/platform/fe3e0000.usb/usb2/2-1/2-1:1.0/0003:1113:3163.0001/input/input1
  766. [    1.135951] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  767. [    1.136206] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
  768. [    1.136350] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  769. [    1.136397] xhci-hcd xhci-hcd.7.auto: irq 229, io mem 0xfe800000
  770. [    1.136536] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  771. [    1.136543] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  772. [    1.136549] usb usb3: Product: xHCI Host Controller
  773. [    1.136555] usb usb3: Manufacturer: Linux 4.4.169 xhci-hcd
  774. [    1.136561] usb usb3: SerialNumber: xhci-hcd.7.auto
  775. [    1.136985] hub 3-0:1.0: USB hub found
  776. [    1.137015] hub 3-0:1.0: 1 port detected
  777. [    1.137263] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  778. [    1.137377] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
  779. [    1.137429] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  780. [    1.137507] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  781. [    1.137514] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  782. [    1.137520] usb usb4: Product: xHCI Host Controller
  783. [    1.137525] usb usb4: Manufacturer: Linux 4.4.169 xhci-hcd
  784. [    1.137531] usb usb4: SerialNumber: xhci-hcd.7.auto
  785. [    1.137890] hub 4-0:1.0: USB hub found
  786. [    1.137911] hub 4-0:1.0: 1 port detected
  787. [    1.139108] xhci-hcd xhci-hcd.7.auto: remove, state 1
  788. [    1.139130] usb usb4: USB disconnect, device number 1
  789. [    1.158212] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds.
  790. [    1.158219] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset.
  791. [    1.158244] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered
  792. [    1.158406] xhci-hcd xhci-hcd.7.auto: remove, state 1
  793. [    1.158419] usb usb3: USB disconnect, device number 1
  794. [    1.158878] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered
  795. [    1.160850] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 89
  796. [    1.160861] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  797. [    1.161308] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  798. [    1.163116]  mmcblk0: p1 p2 p3
  799. [    1.164468] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  800. [    1.164608] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
  801. [    1.164781] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  802. [    1.164830] xhci-hcd xhci-hcd.8.auto: irq 230, io mem 0xfe900000
  803. [    1.164965] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  804. [    1.164972] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  805. [    1.164978] usb usb3: Product: xHCI Host Controller
  806. [    1.164984] usb usb3: Manufacturer: Linux 4.4.169 xhci-hcd
  807. [    1.164990] usb usb3: SerialNumber: xhci-hcd.8.auto
  808. [    1.165372] hub 3-0:1.0: USB hub found
  809. [    1.165398] hub 3-0:1.0: 1 port detected
  810. [    1.165644] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  811. [    1.165764] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
  812. [    1.165815] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  813. [    1.165890] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  814. [    1.165897] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  815. [    1.165903] usb usb4: Product: xHCI Host Controller
  816. [    1.165908] usb usb4: Manufacturer: Linux 4.4.169 xhci-hcd
  817. [    1.165914] usb usb4: SerialNumber: xhci-hcd.8.auto
  818. [    1.166243] hub 4-0:1.0: USB hub found
  819. [    1.166264] hub 4-0:1.0: 1 port detected
  820. [    1.170550] ehci-platform fe380000.usb: EHCI Host Controller
  821. [    1.170691] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
  822. [    1.170847] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  823. [    1.180593] hid-generic 0003:1113:3163.0001: input,hidraw0: USB HID v1.00 Keyboard [MEDION MD 86360] on usb-fe3e0000.usb-1/input0
  824. [    1.189594] input: MEDION MD 86360 as /devices/platform/fe3e0000.usb/usb2/2-1/2-1:1.1/0003:1113:3163.0002/input/input2
  825. [    1.240209] hid-generic 0003:1113:3163.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MEDION MD 86360] on usb-fe3e0000.usb-1/input1
  826. [    1.334954] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  827. [    1.335221] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  828. [    1.335228] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  829. [    1.335235] usb usb5: Product: EHCI Host Controller
  830. [    1.335240] usb usb5: Manufacturer: Linux 4.4.169 ehci_hcd
  831. [    1.335246] usb usb5: SerialNumber: fe380000.usb
  832. [    1.335788] hub 5-0:1.0: USB hub found
  833. [    1.335814] hub 5-0:1.0: 1 port detected
  834. [    1.336649] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  835. [    1.336812] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
  836. [    1.336923] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  837. [    1.392123] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  838. [    1.392137] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  839. [    1.392144] usb usb6: Product: Generic Platform OHCI controller
  840. [    1.392150] usb usb6: Manufacturer: Linux 4.4.169 ohci_hcd
  841. [    1.392155] usb usb6: SerialNumber: fe3a0000.usb
  842. [    1.392774] hub 6-0:1.0: USB hub found
  843. [    1.392800] hub 6-0:1.0: 1 port detected
  844. [    1.393679] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
  845. [    1.393686] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
  846. [    1.393708] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
  847. [    1.394563] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  848. [    1.394605] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  849. [    1.394617] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  850. [    1.394648] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  851. [    1.394671] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  852. [    1.394770] /dwmmc@fe310000: could not find phandle
  853. [    1.394777] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
  854. [    1.394814] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  855. [    1.394844] /dwmmc@fe310000: could not find phandle
  856. [    1.394850] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
  857. [    1.394864] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  858. [    1.394870] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  859. [    1.394884] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
  860. [    1.394890] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
  861. [    1.394898] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
  862. [    1.394905] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
  863. [    1.394910] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
  864. [    1.394917] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
  865. [    1.394967] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  866. [    1.406040] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  867. [    1.417080] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
  868. [    1.418075] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]'
  869. [    1.418084] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]'
  870. [    1.463047] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  871. [    1.464953] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  872. [    1.466492] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  873. [    1.469248] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  874. [    1.523821] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  875. [    1.533021] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
  876. [    1.535820] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  877. [    1.535859] mmc2: new ultra high speed SDR104 SDIO card at address 0001
  878. [    1.542014] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
  879. [    1.542206] es8316 1-0011: ASoC: Failed to create Left Hp mixer debugfs file
  880. [    1.542215] es8316 1-0011: ASoC: Failed to create Right Hp mixer debugfs file
  881. [    1.542230] es8316 1-0011: ASoC: Failed to create HPCP L debugfs file
  882. [    1.542238] es8316 1-0011: ASoC: Failed to create HPCP R debugfs file
  883. [    1.542255] es8316 1-0011: ASoC: Failed to create HPVOL L debugfs file
  884. [    1.542263] es8316 1-0011: ASoC: Failed to create HPVOL R debugfs file
  885. [    1.543785] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
  886. [    1.543796] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
  887. [    1.544040] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  888. [    1.544047] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  889. [    1.544054] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
  890. [    1.544059] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
  891. [    1.544215] asoc-simple-card: probe of spdif-sound failed with error -22
  892. [    1.545918] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.9 (r)
  893. [    1.545930] ======== dhd_wlan_init_plat_data ========
  894. [    1.545935] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
  895. [    1.545944] dhd_wlan_init_gpio: WL_REG_ON=-1, WL_HOST_WAKE=-1
  896. [    1.545948] dhd_wlan_init_gpio: oob_irq=70, oob_irq_flags=0x414
  897. [    1.545952] dhd_wifi_platform_load: Enter
  898. [    1.546007] Power-up adapter 'DHD generic adapter'
  899. [    1.546570] wifi_platform_set_power = 1
  900. [    1.546576] ======== PULL WL_REG_ON(-1) HIGH! ========
  901. [    1.546581] [WLAN_RFKILL]: rockchip_wifi_power: 1
  902. [    1.546588] [WLAN_RFKILL]: wifi turn on power. -1
  903. [    1.547154] rk808-rtc rk808-rtc: setting system clock to 2019-02-16 10:33:57 UTC (1550313237)
  904. [    1.556251] vcc3v3_pcie: disabling
  905. [    1.556259] vcc1v8_wifi: disabling
  906. [    1.556652] rk-keypad rockchip-key: no io-channels defined
  907. [    1.556697] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  908. [    1.556723] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  909. [    1.556821] input: rk29-keypad as /devices/platform/rockchip-key/input/input3
  910. [    1.557628] ALSA device list:
  911. [    1.557636]   #0: ES8316
  912. [    1.589868] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  913. [    1.589896] VFS: Mounted root (ext4 filesystem) on device 179:2.
  914. [    1.590408] devtmpfs: mounted
  915. [    1.590918] Freeing unused kernel memory: 1088K
  916. [    1.742504] systemd[1]: Failed to insert module 'autofs4': No such file or directory
  917. [    1.750726] random: systemd: uninitialized urandom read (16 bytes read, 60 bits of entropy available)
  918. [    1.753058] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  919. [    1.753592] systemd[1]: Detected architecture arm64.
  920. [    1.754201] systemd[1]: Set hostname to <rp64_debian_mr>.
  921. [    1.767280] random: systemd: uninitialized urandom read (16 bytes read, 61 bits of entropy available)
  922. [    1.777033] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 61 bits of entropy available)
  923. [    1.777253] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 61 bits of entropy available)
  924. [    1.778935] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 61 bits of entropy available)
  925. [    1.785047] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 62 bits of entropy available)
  926. [    1.821587] random: systemd: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
  927. [    1.822027] random: systemd: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
  928. [    1.822151] random: systemd: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
  929. [    1.822368] random: systemd: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
  930. [    1.846756] wifi_platform_bus_enumerate device present 1
  931. [    1.846767] ======== Card detection to detect SDIO card! ========
  932. [    1.846772] mmc2:mmc host rescan start!
  933. [    1.862952] bcmsdh_register: register client driver
  934. [    1.863286] bcmsdh_sdmmc_probe: Enter num=1
  935. [    1.863591] bcmsdh_sdmmc_probe: Enter num=2
  936. [    1.863596] bus num (host idx)=2, slot num (rca)=1
  937. [    1.863601] found adapter info 'DHD generic adapter'
  938. [    1.863832] sdioh_attach: set sd_f2_blocksize 256
  939. [    1.863969] sdioh_attach: sd clock rate = 0
  940. [    1.865047] dhdsdio_probe : no mutex held. set lock
  941. [    1.865464] F1 signature read @0x18000000=0x17294359
  942. [    1.870169] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  943. [    1.870954] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  944. [    1.871053] dhd_conf_set_chiprev: chip=0x4359, chiprev=9
  945. [    1.871276] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
  946. [    1.871825] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
  947. [    1.871949] wl_escan_attach: Enter
  948. [    1.871976] wl_escan_init: Enter
  949. [    1.872076] wl_create_event_handler(): thread:wl_escan_handler:ab started
  950. [    1.872108] dhd_init_logstrs_array: Failed to open the file /installmedia/logstrs.bin
  951. [    1.872222] tsk Enter, tsk = 0xffffffc07aef01b0
  952. [    1.872280] dhd_attach(): thread:dhd_watchdog_thread:ac started
  953. [    1.872373] dhd_attach(): thread:dhd_dpc:ad started
  954. [    1.872472] dhd_attach(): thread:dhd_rxf:ae started
  955. [    1.872482] dhd_deferred_work_init: work queue initialized
  956. [    1.872507] dhd_bus_set_default_min_res_mask: Unhandled chip id
  957. [    1.872786] sdioh_cis_read: func_cis_ptr[0]=0x10ac
  958. [    1.885117] Dongle Host Driver, version 1.579.77.41.9 (r)
  959. [    1.885662] wl_ext_iapsta_attach_netdev: bssidx=0
  960. [    1.885674] Register interface [wlan0]  MAC: ac:83:f3:e6:1f:b2
  961.  
  962. [    1.885780] dhd_wl_ioctl: returning as busstate=0
  963. [    1.885787] dhd_dbg_detach_pkt_monitor, 2204
  964. [    1.885793] dhd_bus_devreset: == Power OFF ==
  965. [    1.886107] bcmsdh_oob_intr_unregister: Enter
  966. [    1.886111] bcmsdh_oob_intr_unregister: irq is not registered
  967. [    1.886122] dhd_txglom_enable: enable 0
  968. [    1.886128] dhd_conf_set_txglom_params: txglom_mode=copy
  969. [    1.886132] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
  970. [    1.886137] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
  971. [    1.886141] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
  972. [    1.886145] dhd_bus_devreset:  WLAN OFF DONE
  973. [    1.886200] wifi_platform_set_power = 0
  974. [    1.886206] ======== PULL WL_REG_ON(-1) LOW! ========
  975. [    1.886211] [WLAN_RFKILL]: rockchip_wifi_power: 0
  976. [    1.886228] [WLAN_RFKILL]: wifi shut off power.
  977. [    1.886233] dhdsdio_probe : the lock is released.
  978. [    1.887542] bcmsdh_sdmmc: probe of mmc2:0001:3 failed with error -110
  979. [    1.887605] dhd_module_init: Exit err=0
  980. [    1.931526] systemd[1]: Configuration file /lib/systemd/system/partition-bootup.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  981. [    1.939535] systemd[1]: Listening on Syslog Socket.
  982. [    1.940174] systemd[1]: Created slice User and Session Slice.
  983. [    1.940398] systemd[1]: Listening on udev Control Socket.
  984. [    1.940572] systemd[1]: Listening on Journal Socket.
  985. [    1.940656] systemd[1]: Reached target Remote File Systems.
  986. [    1.940787] systemd[1]: Listening on Journal Socket (/dev/log).
  987. [    1.940853] systemd[1]: Reached target Swap.
  988. [    1.941142] systemd[1]: Created slice System Slice.
  989. [    1.943017] systemd[1]: Mounting Debug File System...
  990. [    1.950235] systemd[1]: Starting Load Kernel Modules...
  991. [    1.955382] systemd[1]: Starting Restore / save the current clock...
  992. [    1.957906] systemd[1]: Starting Remount Root and Kernel File Systems...
  993. [    1.960697] systemd[1]: Starting Create Static Device Nodes in /dev...
  994. [    1.961271] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  995. [    1.966662] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  996. [    1.978062] systemd[1]: Starting Journal Service...
  997. [    1.978421] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  998. [    1.978554] systemd[1]: Reached target Paths.
  999. [    1.978639] systemd[1]: Reached target Encrypted Volumes.
  1000. [    1.978877] systemd[1]: Listening on udev Kernel Socket.
  1001. [    1.979369] systemd[1]: Created slice system-getty.slice.
  1002. [    1.979446] systemd[1]: Reached target Slices.
  1003. [    1.983177] systemd[1]: Mounted Debug File System.
  1004. [    1.984484] systemd[1]: Started Load Kernel Modules.
  1005. [    1.988849] systemd[1]: Started Restore / save the current clock.
  1006. [    1.989659] systemd[1]: Started Remount Root and Kernel File Systems.
  1007. [    1.991660] systemd[1]: Time has been changed
  1008. [    1.996245] systemd[1]: Starting udev Coldplug all Devices...
  1009. [    1.999239] systemd[1]: Starting Load/Save Random Seed...
  1010. [    2.003551] systemd[1]: Starting Apply Kernel Variables...
  1011. [    2.014973] systemd[1]: Mounting Configuration File System...
  1012. [    2.020081] systemd[1]: Mounting FUSE Control File System...
  1013. [    2.028067] systemd[1]: Mounted Configuration File System.
  1014. [    2.028552] systemd[1]: Started Create Static Device Nodes in /dev.
  1015. [    2.029071] systemd[1]: Started Load/Save Random Seed.
  1016. [    2.029562] systemd[1]: Started Apply Kernel Variables.
  1017. [    2.032204] systemd[1]: Mounted FUSE Control File System.
  1018. [    2.035581] systemd[1]: Reached target Local File Systems (Pre).
  1019. [    2.035636] systemd[1]: Reached target Local File Systems.
  1020. [    2.043813] systemd[1]: Starting Raise network interfaces...
  1021. [    2.045702] systemd[1]: Starting udev Kernel Device Manager...
  1022. [    2.099350] systemd[1]: Started udev Kernel Device Manager.
  1023. [    2.144342] systemd[1]: Started Journal Service.
  1024. [    2.170356] systemd-journald[191]: Received request to flush runtime journal from PID 1
  1025. [    2.267884] cdn-dp fec00000.dp: [drm:cdn_dp_request_firmware] *ERROR* failed to request firmware: -11
  1026. [    2.364528] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
  1027. [    2.364545] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
  1028. [    2.365375] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
  1029. [    2.368255] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
  1030. [    2.368266] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
  1031. [    2.368290] ff100000.saradc supply vref not found, using dummy regulator
  1032. [    2.369236] phy phy-pcie-phy.9: Looking up phy-supply from device tree
  1033. [    2.369252] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed
  1034. [    2.369807] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  1035. [    2.369814] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  1036. [    2.369837] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  1037. [    2.369989] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  1038. [    2.370063] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
  1039. [    2.370068] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
  1040. [    2.370088] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  1041. [    2.370091] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
  1042. [    2.370095] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
  1043. [    2.370104] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  1044. [    2.390781] rockchip-pcie f8000000.pcie: invalid power supply
  1045. [    2.460356] mali ff9a0000.gpu: Looking up mali-supply from device tree
  1046. [    2.460617] mali ff9a0000.gpu: Failed to get leakage
  1047. [    2.460638] mali ff9a0000.gpu: Looking up mali-supply from device tree
  1048. [    2.460665] vdd_gpu: could not add device link ff9a0000.gpu err -17
  1049. [    2.460676] vdd_gpu: Failed to create debugfs directory
  1050. [    2.461803] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  1051. [    2.462084] mali ff9a0000.gpu: Protected mode not available
  1052. [    2.463336] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  1053. [    2.463546] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 413; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  1054. [    2.464371] mali ff9a0000.gpu: Probed as mali0
  1055. [    2.532132] dhd_ioctl_entry: Interface is down
  1056. [    2.532140] Error getting the SSID
  1057. [    2.544958] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 1
  1058. [    2.544961] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 2
  1059. [    2.544963] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 3
  1060. [    2.544964] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 4
  1061. [    2.544966] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 5
  1062. [    2.544968] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 6
  1063. [    2.544969] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 7
  1064. [    2.544970] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 8
  1065. [    2.544972] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 9
  1066. [    2.544973] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 10
  1067. [    2.544975] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 11
  1068. [    2.544976] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 12
  1069. [    2.544978] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 13
  1070. [    2.544979] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 14
  1071. [    2.544980] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 15
  1072. [    2.544982] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 16
  1073. [    2.544983] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 17
  1074. [    2.544985] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 18
  1075. [    2.544986] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 19
  1076. [    2.544987] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 20
  1077. [    2.544989] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 21
  1078. [    2.544990] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 22
  1079. [    2.544991] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 23
  1080. [    2.544993] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 24
  1081. [    2.544994] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 25
  1082. [    2.544995] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 26
  1083. [    2.544996] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 27
  1084. [    2.544998] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 28
  1085. [    2.544999] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 29
  1086. [    2.545000] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 30
  1087. [    2.545001] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 31
  1088. [    2.545003] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 32
  1089. [    2.545004] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 33
  1090. [    2.545006] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 34
  1091. [    2.545007] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 35
  1092. [    2.545008] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 36
  1093. [    2.545010] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 37
  1094. [    2.545011] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 38
  1095. [    2.545012] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 39
  1096. [    2.545013] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 40
  1097. [    2.545015] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 41
  1098. [    2.545016] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 42
  1099. [    2.545017] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 43
  1100. [    2.545018] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 44
  1101. [    2.545020] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 45
  1102. [    2.545021] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 46
  1103. [    2.545022] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 47
  1104. [    2.545024] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 48
  1105. [    2.545025] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 49
  1106. [    2.545026] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 50
  1107. [    2.545027] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 51
  1108. [    2.545029] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 52
  1109. [    2.545030] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 53
  1110. [    2.545031] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 54
  1111. [    2.545032] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 55
  1112. [    2.545034] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 56
  1113. [    2.545035] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 57
  1114. [    2.545036] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 58
  1115. [    2.545038] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 59
  1116. [    2.545039] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 60
  1117. [    2.545040] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 61
  1118. [    2.545041] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 62
  1119. [    2.545043] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 63
  1120. [    2.545044] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 64
  1121. [    2.545045] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 65
  1122. [    2.545046] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 66
  1123. [    2.545048] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 67
  1124. [    2.545049] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 68
  1125. [    2.545050] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 69
  1126. [    2.545052] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 70
  1127. [    2.545053] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 71
  1128. [    2.545054] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 72
  1129. [    2.545056] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 73
  1130. [    2.545057] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 74
  1131. [    2.545058] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 75
  1132. [    2.545059] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 76
  1133. [    2.545061] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 77
  1134. [    2.545062] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 78
  1135. [    2.545063] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 79
  1136. [    2.545064] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 80
  1137. [    2.545066] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 81
  1138. [    2.545067] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 82
  1139. [    2.545068] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 83
  1140. [    2.545070] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 84
  1141. [    2.545071] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 85
  1142. [    2.545073] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 86
  1143. [    2.545080] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 87
  1144. [    2.545088] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 88
  1145. [    2.545094] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 89
  1146. [    2.545098] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 90
  1147. [    2.545101] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 91
  1148. [    2.545106] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 92
  1149. [    2.545110] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 93
  1150. [    2.545114] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 94
  1151. [    2.545118] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 95
  1152. [    2.545122] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 96
  1153. [    2.545125] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 97
  1154. [    2.545129] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 98
  1155. [    2.545133] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 99
  1156. [    2.545137] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 100
  1157. [    2.545141] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 101
  1158. [    2.545147] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 102
  1159. [    2.545150] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 103
  1160. [    2.545153] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 104
  1161. [    2.545157] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 105
  1162. [    2.545161] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 106
  1163. [    2.545167] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 107
  1164. [    2.545172] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 108
  1165. [    2.545176] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 109
  1166. [    2.545180] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 110
  1167. [    2.545183] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 111
  1168. [    2.545187] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 112
  1169. [    2.545191] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 113
  1170. [    2.545194] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 114
  1171. [    2.545198] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 115
  1172. [    2.545202] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 116
  1173. [    2.545205] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 117
  1174. [    2.545209] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 118
  1175. [    2.545213] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 119
  1176. [    2.545217] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 120
  1177. [    2.545221] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 121
  1178. [    2.545225] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 122
  1179. [    2.545228] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 123
  1180. [    2.545232] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 124
  1181. [    2.545236] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 125
  1182. [    2.545239] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 126
  1183. [    2.545245] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 127
  1184. [    2.545248] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 128
  1185. [    2.545252] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 129
  1186. [    2.545256] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 130
  1187. [    2.545260] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 131
  1188. [    2.545265] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 132
  1189. [    2.545269] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 133
  1190. [    2.545272] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 134
  1191. [    2.545276] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 135
  1192. [    2.545282] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 136
  1193. [    2.545288] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 137
  1194. [    2.545291] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 138
  1195. [    2.545295] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 139
  1196. [    2.545299] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 140
  1197. [    2.545303] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 141
  1198. [    2.545306] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 142
  1199. [    2.545310] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 143
  1200. [    2.545314] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 144
  1201. [    2.545317] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 145
  1202. [    2.545321] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 146
  1203. [    2.545324] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 147
  1204. [    2.545328] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 148
  1205. [    2.545332] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 149
  1206. [    2.545335] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 150
  1207. [    2.545339] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 151
  1208. [    2.545343] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 152
  1209. [    2.545346] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 153
  1210. [    2.545350] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 154
  1211. [    2.545354] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 155
  1212. [    2.545357] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 156
  1213. [    2.545361] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 157
  1214. [    2.545365] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 158
  1215. [    2.545368] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 159
  1216. [    2.545372] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 160
  1217. [    2.545375] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 161
  1218. [    2.545379] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 162
  1219. [    2.545383] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 163
  1220. [    2.545386] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 164
  1221. [    2.545390] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 165
  1222. [    2.545394] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 166
  1223. [    2.545398] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 167
  1224. [    2.545406] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 168
  1225. [    2.545409] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 169
  1226. [    2.545414] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 170
  1227. [    2.545420] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 171
  1228. [    2.545423] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 172
  1229. [    2.545427] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 173
  1230. [    2.545430] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 174
  1231. [    2.545434] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 175
  1232. [    2.545438] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 176
  1233. [    2.545442] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 177
  1234. [    2.545445] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 178
  1235. [    2.545449] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 179
  1236. [    2.545453] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 180
  1237. [    2.545459] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 181
  1238. [    2.545462] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 182
  1239. [    2.545466] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 183
  1240. [    2.545469] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 184
  1241. [    2.545477] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 185
  1242. [    2.545480] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 186
  1243. [    2.545484] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 187
  1244. [    2.545488] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 188
  1245. [    2.545493] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 189
  1246. [    2.545497] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 190
  1247. [    2.545502] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 191
  1248. [    2.545506] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 192
  1249. [    2.545511] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 193
  1250. [    2.545515] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 194
  1251. [    2.545519] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 195
  1252. [    2.545523] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 196
  1253. [    2.545526] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 197
  1254. [    2.545530] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 198
  1255. [    2.545533] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 199
  1256. [    2.545537] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 200
  1257. [    2.545541] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 201
  1258. [    2.545545] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 202
  1259. [    2.545548] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 203
  1260. [    2.545552] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 204
  1261. [    2.545558] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 205
  1262. [    2.545561] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 206
  1263. [    2.545567] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 207
  1264. [    2.545571] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 208
  1265. [    2.545575] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 209
  1266. [    2.545578] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 210
  1267. [    2.545584] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 211
  1268. [    2.545587] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 212
  1269. [    2.545591] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 213
  1270. [    2.545595] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 214
  1271. [    2.545598] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 215
  1272. [    2.545603] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 216
  1273. [    2.545606] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 217
  1274. [    2.545610] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 218
  1275. [    2.545614] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 219
  1276. [    2.545619] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 220
  1277. [    2.545625] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 221
  1278. [    2.545628] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 222
  1279. [    2.545632] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 223
  1280. [    2.545636] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 224
  1281. [    2.545641] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 225
  1282. [    2.545645] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 226
  1283. [    2.545649] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 227
  1284. [    2.545654] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 228
  1285. [    2.545658] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 229
  1286. [    2.545663] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 230
  1287. [    2.545667] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 231
  1288. [    2.545671] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 232
  1289. [    2.545674] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 233
  1290. [    2.545678] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 234
  1291. [    2.545681] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 235
  1292. [    2.545685] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 236
  1293. [    2.545689] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 237
  1294. [    2.545692] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 238
  1295. [    2.545696] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 239
  1296. [    2.545700] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 240
  1297. [    2.545704] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 241
  1298. [    2.545708] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 242
  1299. [    2.545725] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 243
  1300. [    2.545727] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 244
  1301. [    2.545728] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 245
  1302. [    2.545729] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 246
  1303. [    2.545730] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 247
  1304. [    2.545731] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 248
  1305. [    2.545733] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 249
  1306. [    2.545734] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 250
  1307. [    2.545736] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 251
  1308. [    2.545741] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 252
  1309. [    2.545744] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 253
  1310. [    2.545748] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 254
  1311. [    2.545752] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 255
  1312. [    2.545755] CANNOT FIND postdiv1/2 to make fout in range from 800M to 2000M,fout = 256
  1313. [    2.604706] [BT_RFKILL]: Enter rfkill_rk_set_power
  1314. [    2.604737] [BT_RFKILL]: Set blocked:1
  1315. [    2.604741] [BT_RFKILL]: bt shut off power
  1316. [    2.690262] dhd_open: Enter ffffffc07c70b000
  1317. [    2.690269] dhd_open : no mutex held. set lock
  1318. [    2.690278] dhd_init_logstrs_array: Failed to open the file /installmedia/logstrs.bin
  1319. [    2.690284]
  1320.                Dongle Host Driver, version 1.579.77.41.9 (r)
  1321. [    2.690289] wl_ext_iapsta_attach_netdev: bssidx=0
  1322. [    2.690292] wl_android_wifi_on in 1
  1323. [    2.690295] wl_android_wifi_on in 2: g_wifi_on=0
  1324. [    2.690299] wifi_platform_set_power = 1
  1325. [    2.690302] ======== PULL WL_REG_ON(-1) HIGH! ========
  1326. [    2.690306] [WLAN_RFKILL]: rockchip_wifi_power: 1
  1327. [    2.690310] [WLAN_RFKILL]: wifi turn on power. -1
  1328. [    2.704628] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1329. [    2.757737] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  1330. [    2.890827] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
  1331. [    2.891050] rockchip-pcie: probe of f8000000.pcie failed with error -110
  1332. [    2.990854] sdio_reset_comm():
  1333. [    3.016836] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  1334. [    3.033785] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
  1335. [    3.103287] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  1336. [    3.109616] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1337. [    3.116103] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1338. [    3.127388] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  1339. [    3.354488] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  1340. [    3.356885] random: nonblocking pool is initialized
  1341. [    3.367319] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
  1342. [    3.367379] sdioh_start: set sd_f2_blocksize 256
  1343. [    3.368570]
  1344.                
  1345.                dhd_bus_devreset: == WLAN ON ==
  1346. [    3.368941] F1 signature read @0x18000000=0x17294359
  1347. [    3.373343] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  1348. [    3.374281] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  1349. [    3.374354] dhd_bus_set_default_min_res_mask: Unhandled chip id
  1350. [    3.378073] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt
  1351. [    3.378090] Final fw_path=/lib/firmware/brcm/fw_bcm4359c0_ag.bin
  1352. [    3.378094] Final nv_path=/lib/firmware/brcm/nvram_ap6359sa.txt
  1353. [    3.378097] Final clm_path=/lib/firmware/brcm/clm.blob
  1354. [    3.378101] Final conf_path=/lib/firmware/brcm/config.txt
  1355. [    3.379769] dhd_os_open_image: /lib/firmware/brcm/fw_bcm4359c0_ag.bin (576532 bytes) open success
  1356. [    3.452598] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6359sa.txt (6112 bytes) open success
  1357. [    3.455358] NVRAM version: AP6359SA_NVRAM_V1.1_20170328
  1358. [    3.456538] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  1359. [    3.604736] vendor storage:20160801 ret = -1
  1360. [    3.638637] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  1361. [    3.638685] si_get_pmu_reg_addr: addrRET: 18000670
  1362. [    3.638893] bcmsdh_oob_intr_register: HW_OOB irq=70 flags=0x4
  1363. [    3.639109] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist
  1364. [    3.639114] dhd_get_memdump_info: MEMDUMP ENABLED = 2
  1365. [    3.640573] Disable tdls_auto_op failed. -1
  1366. [    3.640580] dhd_preinit_ioctls: Set tcpack_sup_mode 1
  1367. [    3.641135] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob
  1368. [    3.642850] Firmware up: op_mode=0x0405, MAC=ac:83:f3:e6:1f:b2
  1369. [    3.652326]   Driver: 1.579.77.41.9 (r)
  1370.                  Firmware: wl0: Mar  6 2017 10:16:06 version 9.87.51.7 (r686312) FWID 01-4dcc75d9
  1371.                  CLM: 9.7.5
  1372. [    3.652557] dhd_txglom_enable: enable 1
  1373. [    3.652562] dhd_conf_set_txglom_params: txglom_mode=copy
  1374. [    3.652566] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0
  1375. [    3.652571] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
  1376. [    3.652575] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
  1377. [    3.652588] dhd_conf_get_disable_proptx: fw_proptx=0, disable_proptx=1
  1378. [    3.653608] dhd_pno_init: Support Android Location Service
  1379. [    3.680056] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
  1380. [    3.680064] dhd_rtt_init : FTM is not supported
  1381. [    3.680069] dhd_preinit_ioctls: SensorHub diabled 0
  1382. [    3.680345] dhd_preinit_ioctls failed to set ShubHub disable
  1383. [    3.681415] failed to set WNM capabilities
  1384. [    3.681672] dhd_conf_set_country: set country CN, revision 38
  1385. [    3.683947] Country code: CN (CN/38)
  1386. [    3.685749] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23
  1387. [    3.685955] wl_android_wifi_on: Success
  1388. [    3.701883] dhd_open : the lock is released.
  1389. [    3.701893] dhd_open: Exit ret=0
  1390. [    4.126912] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
  1391. [    4.149733] dwhdmi-rockchip ff940000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
  1392. [    4.149739] dwhdmi-rockchip ff940000.hdmi:     colorspace: RGB
  1393. [    4.149742] dwhdmi-rockchip ff940000.hdmi:     scan mode: Underscan
  1394. [    4.149746] dwhdmi-rockchip ff940000.hdmi:     colorimetry: No Data
  1395. [    4.149749] dwhdmi-rockchip ff940000.hdmi:     picture aspect: 16:9
  1396. [    4.149752] dwhdmi-rockchip ff940000.hdmi:     active aspect: Same as Picture
  1397. [    4.149755] dwhdmi-rockchip ff940000.hdmi:     itc: IT Content
  1398. [    4.149759] dwhdmi-rockchip ff940000.hdmi:     extended colorimetry: xvYCC 601
  1399. [    4.149762] dwhdmi-rockchip ff940000.hdmi:     quantization range: Full
  1400. [    4.149765] dwhdmi-rockchip ff940000.hdmi:     nups: Unknown Non-uniform Scaling
  1401. [    4.149768] dwhdmi-rockchip ff940000.hdmi:     video code: 16
  1402. [    4.149771] dwhdmi-rockchip ff940000.hdmi:     ycc quantization range: Full
  1403. [    4.149774] dwhdmi-rockchip ff940000.hdmi:     hdmi content type: Graphics
  1404. [    4.149777] dwhdmi-rockchip ff940000.hdmi:     pixel repeat: 0
  1405. [    4.149780] dwhdmi-rockchip ff940000.hdmi:     bar top 0, bottom 0, left 0, right 0
  1406. [    4.683105] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top