Advertisement
Guest User

EC21 startup

a guest
Jun 26th, 2019
715
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.83 KB | None | 0 0
  1. Format: Log Type - Time(microsec) - Message - Optional Info
  2. Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
  3. S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00084
  4. S - IMAGE_VARIANT_STRING=LAATANAZA
  5. S - OEM_IMAGE_VERSION_STRING=SH-SW417P
  6. S - Boot Config, 0x000002e1
  7. B - 1216 - PBL, Start
  8. B - 3723 - bootable_media_detect_entry, Start
  9. B - 4382 - bootable_media_detect_success, Start
  10. B - 4386 - elf_loader_entry, Start
  11. B - 7838 - auth_hash_seg_entry, Start
  12. B - 8059 - auth_hash_seg_exit, Start
  13. B - 54871 - elf_segs_hash_verify_entry, Start
  14. B - 98287 - PBL, End
  15. B - 106750 - SBL1, Start
  16. B - 164883 - pm_device_init, Start
  17. B - 184769 - PM_SET_VAL:Skip
  18. D - 18178 - pm_device_init, Delta
  19. B - 185745 - boot_config_data_table_init, Start
  20. D - 174917 - boot_config_data_table_init, Delta - (420 Bytes)
  21. B - 364200 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
  22. B - 370392 - sbl1_ddr_set_params, Start
  23. B - 374235 - Pre_DDR_clock_init, Start
  24. D - 213 - Pre_DDR_clock_init, Delta
  25. D - 0 - sbl1_ddr_set_params, Delta
  26. B - 386953 - pm_driver_init, Start
  27. D - 4544 - pm_driver_init, Delta
  28. B - 393267 - cpr_init, Start
  29. D - 30 - cpr_init, Delta
  30. B - 397872 - cpr_cx_mx_apc_vol_update, Start
  31. D - 61 - cpr_cx_mx_apc_vol_update, Delta
  32. B - 412451 - sbl1_qhsusb_al_do_fast_enum, Start
  33. D - 0 - sbl1_qhsusb_al_do_fast_enum, Delta
  34. B - 415593 - clock_init, Start
  35. D - 152 - clock_init, Delta
  36. B - 421388 - boot_flash_init, Start
  37. D - 37362 - boot_flash_init, Delta
  38. B - 462868 - Image Load, Start
  39. B - 462929 - [QUEC_SECBOOT]Image Type = 1
  40. B - 469517 - [QUEC_SECBOOT]Image Auth Enable Sate = 1
  41. B - 477142 - [QUEC_SECBOOT]Image Auth Result Sate = 0
  42. D - 66673 - QSEE Image Loaded, Delta - (491164 Bytes)
  43. D - 183 - boot_pm_post_tz_device_init, Delta
  44. B - 533963 - sbl1_efs_handle_cookies, Start
  45. D - 0 - sbl1_efs_handle_cookies, Delta
  46. B - 541253 - Devcfg Partition does not exist
  47. B - 545523 - Image Load, Start
  48. D - 0 - SEC Image Loaded, Delta - (0 Bytes)
  49. B - 553209 - Image Load, Start
  50. B - 556137 - [QUEC_SECBOOT]Image Type = 1
  51. B - 563121 - [QUEC_SECBOOT]Image Auth Enable Sate = 1
  52. B - 570716 - [QUEC_SECBOOT]Image Auth Result Sate = 0
  53. D - 32848 - RPM Image Loaded, Delta - (153168 Bytes)
  54. B - 586118 - Image Load, Start
  55. B - 587765 - [QUEC_SECBOOT]Image Type = 1
  56. B - 594872 - [QUEC_SECBOOT]Image Auth Enable Sate = 1
  57. B - 602436 - [QUEC_SECBOOT]Image Auth Result Sate = 0
  58. D - 52918 - APPSBL Image Loaded, Delta - (380028 Bytes)
  59. B - 639066 - QSEE Execution, Start
  60. D - 213 - QSEE Execution, Delta
  61. B - 644739 - SBL1, End
  62. D - 540368 - SBL1, Delta
  63. S - Throughput, 3000 KB/s (1024780 Bytes, 287489 us)
  64. S - DDR Frequency, 240 MHz
  65. Android Bootloader - UART_DM Initialized!!!
  66. [0] welcome to lk
  67.  
  68. [0] SCM call: 0x2000601 failed with :fffffffc
  69. [0] Failed to initialize SCM
  70. [10] platform_init()
  71. [10] target_init()
  72. [10] 111 flash->id=0x2690ac98,supported_flash[0]=0x1590ac2c, flash->id2=0x81676, supported_flash_id2=0x56[20] 111 flash->id=0x
  73. 2690ac98,supported_flash[1]=0x1590ac01, flash->id2=0x81676, supported_flash_id2=0x56[30] 111 flash->id=0x2690ac98,supported_fl
  74. ash[2]=0x1590aaad, flash->id2=0x81676, supported_flash_id2=0x46[30] 111 flash->id=0x2690ac98,supported_flash[3]=0x1590aa98, fl
  75. ash->id2=0x81676, supported_flash_id2=0x76[40] 111 flash->id=0x2690ac98,supported_flash[4]=0x1590acad, flash->id2=0x81676, sup
  76. ported_flash_id2=0x56[50] 111 flash->id=0x2690ac98,supported_flash[5]=0x1590ac2c, flash->id2=0x81676, supported_flash_id2=0x57
  77. [60] 111 flash->id=0x2690ac98,supported_flash[6]=0x1590aa2c, flash->id2=0x81676, supported_flash_id2=0x6[70] 111 flash->id=0x2
  78. 690ac98,supported_flash[7]=0x2690ac2c, flash->id2=0x81676, supported_flash_id2=0x54[80] 111 flash->id=0x2690ac98,supported_fla
  79. sh[8]=0x1590acad, flash->id2=0x81676, supported_flash_id2=0x0[90] 111 flash->id=0x2690ac98,supported_flash[9]=0x9590dc2c, flas
  80. h->id2=0x81676, supported_flash_id2=0x56[100] 111 flash->id=0x2690ac98,supported_flash[10]=0x1590aa98, flash->id2=0x81676, sup
  81. ported_flash_id2=0x76[110] 111 flash->id=0x2690ac98,supported_flash[11]=0x2690a32c, flash->id2=0x81676, supported_flash_id2=0x
  82. 64[120] 111 flash->id=0x2690ac98,supported_flash[12]=0x2690ac98, flash->id2=0x81676, supported_flash_id2=0x81676[130] smem pta
  83. ble found: ver: 4 len: 19
  84. [130] ERROR: No devinfo partition found
  85. [130] Neither 'config' nor 'frp' partition found
  86. [140] [Ramos] get fastboot message start !!!
  87. [140] [Ramos] get fastboot message end !!!
  88. CTRL+C: enter instruction mode
  89. PINTEST OR FASTBOOT
  90.  
  91.  
  92.  
  93. aboot_init char: ‚
  94. aboot_init char: ‚
  95. aboot_init char: ‚
  96. aboot_init char: ‚
  97. aboot_init char: ‚
  98. aboot_init char: ‚
  99. aboot_init char: ‚
  100. aboot_init char: ‚
  101. aboot_init char: ‚
  102. aboot_init char: ‚
  103. [260] @Ramos Read flag qpic_nand_read_page =0x1f40,
  104. [260] @Ramos Read flag qpic_nand_read_page result=0,
  105. [270] flash_read_image: success (0 errors)
  106. [270] @Ramos Ql_check_RestoreFlag:offset=440000, magic1=78e5d4c2,magic2=54f7d60e,linuxfs_restoreFlag=0, cefs_restoreFlag=0, mo
  107. dem_restoreFlag=0,recoveryfs_restoreFlag=0 image_restoring_flag=0
  108. [290] @Ramos linuxfs_restore_times=0, cefs_restore_times=0, modem_restore_times=0
  109. [290] @Ramos Read flag qpic_nand_read_page =0x1e80,
  110. [300] @Ramos Read flag qpic_nand_read_page result=0,
  111. [300] flash_read_image: success (0 errors)
  112. [310] @Ramos check AllRestoring flag =-1,fota_updateRecoveryImgFlag=-1
  113. [320] AAAAALoading (boot) image (5881856): start
  114. [900] AAAAALoading (boot) image (5881856): done
  115. [900] Authenticating boot image (5881856): start
  116. [970] Authenticating boot image: done return value = 1
  117. [1020] DTB Total entry: 25, DTB version: 3
  118. [1020] Using DTB entry 0x00000129/00010000/0x00000008/0 for device 0x00000129/00010000/0x00010008/0
  119. [1030] cmdline: noinitrd rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_level
  120. s.sleep_disabled=1 earlycon=msm_hsl_uart,0x78b3000 androidboot.serialno=f36b0cf9 androidboot.authorized_kernel=true androidb
  121. oot.baseba[1050] Updating device tree: start
  122. [1160] Updating device tree: done
  123. [1160] booting linux @ 0x80008000, ramdisk @ 0x80008000 (0), tags/device tree @ 0x81e00000
  124. INIT: version 2.88 booting
  125. ln: /system/bin/sh: File exists
  126. Switching to composition number 0x9025
  127. Starting adbd: done
  128. @Ramos modem file check ok !!!!Starting psmd: done
  129. /firmware/image
  130. Nothing to do. No firmware links needed.
  131. Starting ipacm_perf: done
  132. Starting ipacmdiag: done
  133. Starting QCMAP_ConnectionManager: done
  134. Starting qti: done
  135. Sun Jan 6 00:02:42 UTC 1980
  136. INIT: Entering runlevel: 5alid argument
  137. Starting quectel_pcm_daemon: done
  138. Configuring network interfaces... Error: argument "eth0" is wrong: Unknown device
  139. Starting syslogd done
  140. Starting tftp_server: /sbin/tftp_server is already running
  141. 403
  142. Starting irsc_util: Starting irsc tool
  143. Failed to open file:/etc/sec_config
  144. Absent/Invalid config,Default rules apply
  145. Ending irsc tool
  146. done
  147. Starting time_services: done
  148. Starting modem dependent daemons: Starting/Loading embms_kernel module: done loading embms_kernel module
  149. Starting qmuxd: done
  150. Starting thermal-engine: done
  151. Starting remote_efs_service done
  152. Starting netmgrd: done
  153. Starting qmi_shutdown_modem: done
  154. Starting quectel-gps-handle: done
  155. Starting quectel_daemon: done
  156. Starting quectel-thermal: done
  157. Starting quectel-uart-ddp: done
  158. Starting quectel-writedata-test: done
  159. Starting quectel_daemon: done
  160. Starting quectel_psm_aware: done
  161. Starting quectel-remotefs-service done
  162. Starting quectel-smd-atcmd: done
  163. Starting quectel-tts-service done
  164. Starting Lighttpd Web Server: self-signing certificates already exist for webserver: lighttpd.
  165. 1980-01-06 00:43:45: (/home/quectel/alessa_linux164/Qualcomm/MDM9x07/STD/REL/R06/B01/apps_proc/oe-core/build/tmp-glibc/work/ar
  166. mv7a-vfp-neon-oe-linux-gnueabi/lighttpd/1.4.35-r1/lighttpd-1.4.35/src/log.c.164) server started
  167. Starting eMBMs_TunnelingModule: done
  168. Starting qmi_ip: done
  169. Starting subsystem_ramdump: done
  170. Starting wlan_services... start
  171. Setting restart level: system
  172. done
  173. Starting/Loading Shortcut_FE Driver: done loading Shortcut FE driver
  174. Starting system message bus: dbus.
  175. Starting modem dependent daemons: Starting diagrebootapp: done
  176. Starting atreset: done
  177. Starting Lighttpd Web Server: self-signing certificates already exist for webserver: /usr/sbin/lighttpd is already running
  178. 993
  179. lighttpd.
  180. Starting qti_ppp: done
  181. done
  182. * Starting Avahi Unicast DNS Configuration Daemon: avahi-dnsconfd
  183. ...fail!
  184. S:2345:respawn:/sbin/getty -L ttyHSL0 115200 console
  185. Starting powerconfig for mdm9607: Starting fs-scrub-daemon: /sbin/fs-scrub-daemon is already running
  186. 404
  187. Starting pdc daemon: done
  188. Starting ql_forward done
  189. Starting ql_manager_server: done
  190.  
  191. msm 201806211135 mdm9607-perf /dev/ttyHSL0
  192.  
  193. mdm9607-perf login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement