daily pastebin goal
52%
SHARE
TWEET

ReShade Cinematic Preset

a guest Mar 8th, 2017 48 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. //++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  2. // ReShade effect file
  3. // visit facebook.com/MartyMcModding for news/updates
  4. //++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  5. // MasterEffect ReBorn 1.1.190 public beta by Marty McFly
  6. // Continuation of MasterEffect 1.6.1
  7. // Copyright © 2008-2015 Marty McFly
  8. //++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  9.  
  10. /*==============================================================================*\
  11. |                                GLOBAL PARAMETERS                               |
  12. \*==============================================================================*/
  13.  
  14. #define MASTEREFFECT_TOGGLEKEY  0x91    //[depending on keyboard layout] Key used to toggle all MasterEffect effects. See ReShade documentation for more info.
  15.  
  16. #define USE_DEPTHBUFFER_OUTPUT  0   //[0 or 1] Depth Buffer Output: Shows you the pixel depth, this is for debugging or depth map creation only.
  17. #define USE_SPLITSCREEN     0   //[0 or 1] Splitscreen: Disables all effects on the right half of the screen to show changes.
  18. #define USE_HDR_MODE        0   //[0 to 2] HDR Level: Rendering bitrate. 0: RGBA8 | 1: RGBA16F | 2: RGBA32F
  19. #define USE_HUD_MASKING     0   //[0 or 1] HUD Masking: Uses a texture mask (mcmask.png) to exclude certain screen areas from effects processing.
  20.  
  21. /*==============================================================================*\
  22. |                                 ENABLE EFFECTS                                 |
  23. \*==============================================================================*/
  24.  
  25. //COLOR
  26. #define USE_LUT         0   //[0 or 1] Color Lookup Table: Uses a gradient texture to adjust the colors of the image.
  27. #define USE_CARTOON         0   //[0 or 1] Cartoon : "Toon"s the image.
  28. #define USE_LEVELS          0   //[0 or 1] Levels : Sets a new black and white point. This increases contrast but causes clipping. Use Curves instead if you want to avoid that.
  29. #define USE_TECHNICOLOR     0   //[0 or 1] Technicolor : Attempts to mimic the look of an old movie using the Technicolor three-strip color process. Algorithm from prod80
  30. #define USE_SWFX_TECHNICOLOR    0   //[0 or 1] Technicolor : Attempts to mimic the look of an old movie using the Technicolor three-strip color process. Algorithm from SweetFX
  31. #define USE_DPX             0   //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor.
  32. #define USE_MONOCHROME      0   //[0 or 1] Monochrome : Monochrome makes the colors disappear. No control values.
  33. #define USE_LIFTGAMMAGAIN   0   //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights.
  34. #define USE_TONEMAP         0   //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping).
  35. #define USE_VIBRANCE        0   //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
  36. #define USE_CURVES          0   //[0 or 1] Curves : Contrast adjustments using S-curves.
  37. #define USE_SEPIA           0   //[0 or 1] Sepia : Sepia tones the image.
  38. #define USE_SKYRIMTONEMAP   0   //[0 or 1] Skyrim Tonemap: Applies color correction/tonemapping based on tonemappers of popular Skyrim ENB's.
  39. #define USE_COLORMOOD       0       //[0 or 1] Color Mood: Applies a "mood" to the color, tinting mainly the dark colors.
  40. #define USE_CROSSPROCESS    1       //[0 or 1] Cross Processing: Simulates wrong chemistry in color processing.
  41. #define USE_FILMICPASS      1   //[0 or 1] Filmic Pass: Applies some common color adjustments to mimic a more cinema-like look.
  42. #define USE_REINHARD        1   //[0 or 1] Reinhard: This is the Reinhard tonemapping shader, if you are interested, google how it works.
  43. #define USE_REINHARDLINEAR  0   //[0 or 1] Reinhard: Reinhard mixed with some linear tonemapping.
  44. #define USE_COLORMOD        0   //[0 or 1] Colormod: Contrast, Saturation and Brightness ported from colormod.asi.
  45. #define USE_SPHERICALTONEMAP    0   //[0 or 1] Spherical Tonemap: Another approach on tonemapping, uses some sphere algorithms.
  46. #define USE_HPD         0   //[0 or 1] Haarm Peter Duiker Filmic Tonemapping: Tonemapping used in Watch Dogs, ripped from the Watch Dogs shaders themselves.
  47. #define USE_FILMICCURVE     0   //[0 or 1] Filmic Curve: Improved version of the well-known Uncharted 2 filmic curve, first seen in iCEnhancer 0.3.
  48. #define USE_WATCHDOG_TONEMAP    0   //[0 or 1] Watch Dogs Tonemap: Enables one of the numerous watch dogs tonemapping algorithms. No tweaking values.
  49. #define USE_SINCITY     0   //[0 or 1] Sin City: Effect from the movie "Sin City" - everything else than red is grey.
  50. #define USE_COLORHUEFX      0   //[0 or 1] Color Hue FX: Desaturates everything but colors from a fixed hue mid and the range around it. Similiar to Sin City but much better. Thanks, prod80!
  51.  
  52. //LIGHTING
  53. #define USE_LENSDIRT        0   //[0 or 1] Lensdirt: Simulates a dirty camera lens. IMPORTANT: bloom threshold and amount have influence on the intensity of the dirt!
  54. #define USE_GAUSSIAN_ANAMFLARE  0   //[0 or 1] Gaussian Anamflare: Applies a horizontal light beam to bright pixels.
  55. #define USE_BLOOM       1   //[0 or 1] Bloom: Makes bright lights bleed their light into their surroundings. NOT the SweetFX way to do bloom but a more proper way.
  56. #define USE_LENZFLARE       0   //[0 or 1] Lenz Flare: Boris Vorontsov's Skyrim Lensflare with custom offsets, ported to MasterEffect.
  57. #define USE_CHAPMAN_LENS    0   //[0 or 1] Chapman's lensflare: Simple lensflare shader with one big halo.
  58. #define USE_GODRAYS     0   //[0 or 1] Godrays: Adds some light rays rotating around screen center.
  59. #define USE_ANAMFLARE       0   //[0 or 1] Anamorphic Lensflare: adds some horizontal light flare, simulating the use of an anamorphic lens while recording.
  60.  
  61. //DEPTH BASED
  62. #define USE_AMBIENTOCCLUSION    0   //[0 or 1] Ambient Occlusion: Enables physically incorrect shading that most newer gen games use. Multiple algorithms available.
  63. #define USE_DEPTHOFFIELD    0   //[0 or 1] Depth of Field: Simulates out of focus blur of a camera. Multiple algorithms available.
  64.  
  65. //IMAGE ENHANCEMENTS
  66. #define USE_SHARPENING      1   //[0 or 1] Sharpen: Sharps the image but may increase aliasing
  67. #define USE_FISHEYE_CA      1   //[0 or 1] Fisheye lens & Chromatic Abberation: Adds some RGB shift in colors and distorts image to look like the "fisheye" effect.
  68. #define USE_GRAIN       0   //[0 or 1] Grain: Adds some image grain, looks like when a TV has no signal.
  69. #define USE_EXPLOSION       0   //[0 or 1] Explosion : Scatters the pixels, making the image look fuzzy.
  70. #define USE_SMAA        0   //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique.
  71. #define USE_HEATHAZE        0   //[0 or 1] Heat Haze: Convection in heated air causes the temperature of the air to vary and causes a shimmery effect that distorts whatever is behind.
  72.  
  73. //OVERLAYS
  74. #define USE_HD6_VIGNETTE    0   //[0 or 1] HeliosDoubleSix Vignette: Adds some advanced vignette (darkening shader) to lead focus to screen center
  75. #define USE_COLORVIGNETTE   0   //[0 or 1] Boris Vorontsov Vignette: Simple colorable version of vignette, darkens/tints the image at the corners
  76. #define USE_BORDER      0   //[0 or 1] Border: Can be used to create letterbox borders around the image.
  77. #define USE_MOVIEBARS       0   //[0 or 1] Movie Bars: blackens the image on the top and bottom, simulating a higher aspect ratio. Default set to 21:9 aspect ratio.
  78.  
  79. /*==============================================================================*\
  80. |                             EFFECT PARAMETERS - COLOR                          |
  81. \*==============================================================================*/
  82.  
  83. //CARTOON
  84. #define CartoonPower                4.5     //[0.1 to 10.0] Amount of effect you want.
  85. #define CartoonEdgeSlope            1.5     //[0.1 to 8.0] Raise this to filter out fainter edges. You might need to increase the power to compensate. Whole numbers are faster.
  86.  
  87. //LEVELS
  88. #define Levels_black_point      36      //[0 to 255] The black point is the new black - literally. Everything darker than this will become completely black. Default is 16.0
  89. #define Levels_white_point      235     //[0 to 255] The new white point. Everything brighter than this becomes completely white. Default is 235.0
  90.  
  91. //TECHNICOLOR
  92. #define ColStrengthR            0.2 //[0.05 to 1.0] Color Strength of Red channel. Higher means darker and more intense colors.
  93. #define ColStrengthG            0.2 //[0.05 to 1.0] Color Strength of Green channel. Higher means darker and more intense colors.
  94. #define ColStrengthB            0.2 //[0.05 to 1.0] Color Strength of Blue channel. Higher means darker and more intense colors.
  95. #define TechniBrightness        1.0 //[0.5 to 1.5] Brightness Adjustment, higher means brighter image.
  96. #define TechniStrength          1.0 //[0.0 to 1.0] Strength of Technicolor effect. 0.0 means original image.
  97. #define TechniSat           0.7 //[0.0 to 1.5] Additional saturation control since technicolor tends to oversaturate the image.
  98.  
  99. //SWEETFX TECHNICOLOR
  100. #define TechniAmount            0.4     //[0.00 to 1.00] Amount of color change you want
  101. #define TechniPower             4.0     //[0.00 to 8.00] Power of color change
  102. #define redNegativeAmount           0.88    //[0.00 to 1.00] controls for different technicolor power on the respective color channels
  103. #define greenNegativeAmount         0.88    //[0.00 to 1.00]
  104. #define blueNegativeAmount          0.88    //[0.00 to 1.00]
  105.  
  106. //DPX
  107. #define DPXRed              8.0     //[1.0 to 15.0] Amount of DPX applies on Red color channel
  108. #define DPXGreen            8.0     //[1.0 to 15.0] ""
  109. #define DPXBlue             8.0     //[1.0 to 15.0] ""
  110. #define DPXColorGamma           2.5     //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral.
  111. #define DPXSaturation           3.0     //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral.
  112. #define DPXRedC             0.36    //[0.60 to 0.20]
  113. #define DPXGreenC           0.36    //[0.60 to 0.20]
  114. #define DPXBlueC            0.34    //[0.60 to 0.20]
  115. #define DPXBlend            0.2     //[0.00 to 1.00] How strong the effect should be.
  116.  
  117. //LIFTGAMMAGAIN
  118. #define RGB_Lift        float3(1.000, 1.000, 1.000)  //[0.000 to 2.000] Adjust shadows for Red, Green and Blue.
  119. #define RGB_Gamma       float3(1.000, 2.000, 1.000)  //[0.000 to 2.000] Adjust midtones for Red, Green and Blue
  120. #define RGB_Gain        float3(1.000, 1.000, 1.000)  //[0.000 to 2.000] Adjust highlights for Red, Green and Blue
  121.  
  122. //TONEMAP
  123. #define Gamma                   1.000   //[0.000 to 2.000] Adjust midtones. 1.000 is neutral. This setting does exactly the same as the one in Lift Gamma Gain, only with less control.
  124. #define Exposure                0.000   //[-1.000 to 1.000] Adjust exposure
  125. #define Saturation              0.000   //[-1.000 to 1.000] Adjust saturation
  126. #define Bleach                  0.000   //[0.000 to 1.000] Brightens the shadows and fades the colors
  127. #define Defog                   0.000   //[0.000 to 1.000] How much of the color tint to remove
  128. #define FogColor            float3(0.00, 0.00, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue
  129.  
  130. //VIBRANCE
  131. #define Vibrance                1.15    //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
  132. #define Vibrance_RGB_balance        float3(1.00, 1.00, 1.00) //[-10.00 to 10.00,-10.00 to 10.00,-10.00 to 10.00] A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over others
  133.  
  134. //CURVES
  135. #define Curves_mode             2   //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
  136. #define Curves_contrast         1.15    //[-1.00 to 1.00] The amount of contrast you want
  137.  
  138. // -- Advanced curve settings --
  139. #define Curves_formula          2   //[1|2|3|4|5|6|7|8|9|10] The contrast s-curve you want to use.
  140.                                         //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep
  141.                                         //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 = Half-circles.
  142.                                         //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors.
  143.                                         //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula.
  144.        
  145. //SEPIA
  146. #define ColorTone       float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image
  147. #define GreyPower           0.11    //[0.00 to 1.00] How much desaturate the image before tinting it
  148. #define SepiaPower          0.58    //[0.00 to 1.00] How much to tint the image
  149.  
  150. //SKYRIM TONEMAPPING
  151. #define POSTPROCESS         6   //[1 to 6] Mode of postprocessing you want. Mode 1 uses V1 values, Mode 2 uses V2 values etc
  152. //
  153. #define EAdaptationMinV1        0.05
  154. #define EAdaptationMaxV1        0.125
  155. #define EContrastV1             1.0
  156. #define EColorSaturationV1          1.0
  157. #define EToneMappingCurveV1         6.0
  158. // 
  159. #define EAdaptationMinV2        0.36
  160. #define EAdaptationMaxV2        0.29
  161. #define EToneMappingCurveV2         8.0
  162. #define EIntensityContrastV2        2.5
  163. #define EColorSaturationV2      3.2
  164. #define EToneMappingOversaturationV2    180.0
  165. //
  166. #define EAdaptationMinV3        0.001
  167. #define EAdaptationMaxV3        0.025
  168. #define EToneMappingCurveV3         30.0  
  169. #define EToneMappingOversaturationV3    111160.0
  170. //
  171. #define EAdaptationMinV4        0.2
  172. #define EAdaptationMaxV4        0.125
  173. #define EBrightnessCurveV4          0.7
  174. #define EBrightnessMultiplierV4     0.45
  175. #define EBrightnessToneMappingCurveV4   0.3
  176. //
  177. #define EAdaptationMinV5        0.08
  178. #define EAdaptationMaxV5        0.20  
  179. #define EToneMappingCurveV5         8  
  180. #define EIntensityContrastV5        3.475  
  181. #define EColorSaturationV5          4
  182. #define HCompensateSatV5        2  
  183. #define EToneMappingOversaturationV5    180.0
  184. //
  185. #define EBrightnessV6Day        2.5                            
  186. #define EIntensityContrastV6Day     1.5                    
  187. #define EColorSaturationV6Day       2.0                    
  188. #define HCompensateSatV6Day         3.0                        
  189. #define EAdaptationMinV6Day         0.64                       
  190. #define EAdaptationMaxV6Day         0.24                       
  191. #define EToneMappingCurveV6Day      8
  192. #define EToneMappingOversaturationV6Day  2500.0
  193.  
  194. //COLORMOOD
  195. #define fRatio              0.4     //[0.00 to 3.00] Amount of moody coloring you want
  196. #define moodR               1.0     //[0.0 to 2.0] How strong dark red colors shall be boosted
  197. #define moodG               1.1     //[0.0 to 2.0] How strong dark green colors shall be boosted
  198. #define moodB               0.5     //[0.0 to 2.0] How strong dark blue colors shall be boosted
  199.  
  200. //CROSSPROCESS
  201. #define CrossContrast           0.95    //[0.5 to 2.00] The names of these values should explain their functions
  202. #define CrossSaturation         1.2     //[0.5 to 2.00]
  203. #define CrossBrightness         -0.052  //[-0.3 to 0.30]
  204. #define CrossAmount         0.65    //[0.05 to 1.5]
  205.  
  206. //FILMICPASS
  207. #define Strenght            0.8     //[0.05 to 1.5] Strength of the color curve altering
  208. #define BaseGamma           0.75    //[0.7 to 2.0] Gamma Curve
  209. #define Fade                0.5 //[0.0 to 0.6] Decreases contrast to imitate faded image
  210. #define Contrast            1.0 //[0.5 to 2.0] Contrast.
  211. #define FSaturation         -0.1
  212. #define FBleach             0.00    //[-0.5 to 1.0] More bleach means more contrasted and less colorful image
  213. #define FRedCurve           1.0
  214. #define FGreenCurve         1.0
  215. #define FBlueCurve          1.0
  216. #define BaseCurve           1.5
  217. #define EffectGammaR            1.0
  218. #define EffectGammaG            1.0
  219. #define EffectGammaB            1.0
  220. #define EffectGamma         1.3
  221. #define Linearization           0.5     //[0.5 to 2.0] Linearizes the color curve
  222.  
  223. //REINHARD TONEMAP
  224. #define ReinhardWhitepoint      5.0     //[1.0 to 10.0] Point above which everything is pure white
  225. #define ReinhardScale           0.24    //[0.0 to 2.0] Amount of applied tonemapping
  226.  
  227. //REINHARD LINEAR TONEMAP
  228. #define ReinhardLinearWhitepoint    4.4
  229. #define ReinhardLinearPoint     0.06
  230. #define ReinhardLinearSlope     2.25    //[1.0 to 5.0] how steep the color curve is at linear point. You need color curve understanding to know what this means, just experiment.
  231.  
  232. //COLORMOD
  233. #define ColormodChroma          0.78    // Saturation
  234. #define ColormodGammaR          1.05    // Gamma for Red color channel
  235. #define ColormodGammaG          1.05    // Gamma for Green color channel
  236. #define ColormodGammaB          1.05    // Gamma for Blue color channel
  237. #define ColormodContrastR       0.50    // Contrast for Red color channel
  238. #define ColormodContrastG       0.50    // ...
  239. #define ColormodContrastB       0.50    // ...
  240. #define ColormodBrightnessR         -0.08   // Brightness for Red color channel
  241. #define ColormodBrightnessG         -0.08   // ...
  242. #define ColormodBrightnessB         -0.08   // ...
  243.  
  244. //SPHERICAL TONEMAP
  245. #define sphericalAmount         1.0 //[0.0 to 2.0] Amount of spherical tonemapping applied...sort of
  246.  
  247. //COLOR HUE FX
  248. #define USE_COLORSAT            0       //[0 or 1] This will use original color saturation as an added limiter to the strength of the effect
  249. #define hueMid              0.6 //[0.0 to 1.0] Hue (rotation around the color wheel) of the color which you want to keep
  250. #define hueRange            0.1 //[0.0 to 1.0] Range of different hue's around the hueMid that will also kept. Using a max range of 1.0 will allow the reverse of the effect where it will only filter a specific hue to B&W
  251. #define satLimit            2.9 //[0.0 to 4.0] Saturation control, better keep it higher than 0 for strong colors in contrast to the gray stuff around
  252. #define fxcolorMix          0.8 //[0.0 to 1.0] Interpolation between the original and the effect, 0 means full original image, 1 means full grey-color image.
  253.  
  254. /*==============================================================================*\
  255. |                           EFFECT PARAMETERS - LIGHTING                         |
  256. \*==============================================================================*/
  257.  
  258. //LENSDIRT
  259. #define fLensdirtIntensity      1.0 //[0.0 to 2.0] Intensity of lensdirt.
  260. #define fLensdirtSaturation     4.0 //[0.0 to 2.0] Color saturation of lensdirt.
  261. #define fLensdirtTint       float3(1.0,1.0,1.0) //[0.0 to 1.0] R, G and B components of lensdirt tintcolor the lensdirt color gets shifted to.
  262. #define iLensdirtMixmode        2   //[1 to 4] 1: Linear add | 2: Screen add | 3: Screen/Lighten/Opacity | 4: Lighten
  263.  
  264. //GAUSSIAN ANAMORPHIC LENSFLARE
  265. #define fAnamFlareThreshold     0.94    //[0.1 to 1.0] Every pixel brighter than this value gets a flare.
  266. #define fAnamFlareWideness      2.4 //[1.0 to 2.5] Horizontal wideness of flare. Don't set too high, otherwise the single samples are visible
  267. #define fAnamFlareAmount        7.5 //[1.0 to 20.0] Intensity of anamorphic flare.
  268. #define fAnamFlareCurve         1.2 //[1.0 to 2.0] Intensity curve of flare with distance from source
  269. #define fAnamFlareColor     float3(0.012,0.013,0.188) //[0.0 to 1.0] R, G and B components of anamorphic flare. Flare is always same color.
  270.  
  271. //BLOOM
  272. #define iBloomMixmode           2   //[1 to 4] 1: Linear add | 2: Screen add | 3: Screen/Lighten/Opacity | 4: Lighten
  273. #define fBloomThreshold         0.8 //[0.1 to 1.0] Every pixel brighter than this value triggers bloom.
  274. #define fBloomAmount            0.7 //[1.0 to 20.0] Intensity of bloom.
  275. #define fBloomSaturation        1.2 //[0.0 to 2.0] Bloom saturation. 0.0 means white bloom, 2.0 means very very colorful bloom.
  276. #define fBloomTint      float3(0.7,0.8,1.0) //[0.0 to 1.0] R, G and B components of bloom tintcolor the bloom color gets shifted to.
  277.  
  278. //LENZ FLARE
  279. #define LENZDEPTHCHECK          1       //[0 or 1] if 1, only pixels with depth = 1 get lens flare, this prevents white objects from getting flare source which would normally happen in LDR
  280. #define fLenzIntensity          1.0     //[0.2 to 3.0] power of lens flare effect
  281. #define fLenzThreshold          0.8     //[0.6 to 1.0] Minimum brightness an object must have to cast lensflare
  282.  
  283. //CHAPMAN LENS
  284. #define CHAPMANDEPTHCHECK       1   //[0 or 1] if 1, only pixels with depth = 1 get lensflares, this prevents white objects from getting lensflare source which would normally happen in LDR
  285. #define ChapFlareTreshold       0.9 //[0.7 to 0.99] Brightness threshold for lensflare generation. Everything brighter than this value gets a flare.
  286. #define ChapFlareCount          15  //[1 to 20] Number of single halos to be generated. If set to 0, only the curved halo around is visible.
  287. #define ChapFlareDispersal      0.25    //[0.25 to 1.0] Distance from screen center (and from themselves) the flares are generated.        
  288. #define ChapFlareSize           0.45    //[0.2 to 0.8] Distance (from screen center) the halo and flares are generated.
  289. #define ChapFlareCA         float3(0.0,0.01,0.02) //[-0.5 to 0.5] Offset of RGB components of flares as modifier for Chromatic abberation. Same 3 values means no CA.
  290. #define ChapFlareIntensity      100.0   //[5.0 to 20.0] Intensity of flares and halo, remember that higher threshold lowers intensity, you might play with both values to get desired result.
  291.  
  292. //GODRAYS
  293. #define bGodrayDepthCheck       1   //[0 or 1] if 1, only pixels with depth = 1 get godrays, this prevents white objects from getting godray source which would normally happen in LDR
  294. #define iGodraySamples          128 //[2^x format] How many samples the godrays get
  295. #define fGodrayDecay            0.99    //[0.5 to 0.9999] How fast they decay. It's logarithmic, 1.0 means infinite long rays which will cover whole screen
  296. #define fGodrayExposure         1.0 //[0.7 to 1.5] Upscales the godray's brightness
  297. #define fGodrayWeight           1.25    //[0.8 to 1.7] weighting
  298. #define fGodrayDensity          1.0 //[0.2 to 2.0] Density of rays, higher means more and brighter rays
  299. #define fGodrayThreshold        0.9     //[0.6 to 1.0] Minimum brightness an object must have to cast godrays
  300.  
  301. //ANAMORPHIC LENSFLARE
  302. #define bFlareDepthCheckEnable      1   //[0 or 1] if 1, only pixels with depth = 1 get an anamflare, this prevents white objects from getting flare source which would normally happen in LDR
  303. #define fFlareLuminance         0.95    //[0.6 to 1.0] bright pass luminance value
  304. #define fFlareBlur          200.0   // [1.0 to 9999999] manages the size of the flare
  305. #define fFlareIntensity         2.07    // [0.2 to 5.0] effect intensity
  306. #define fFlareTint          float3(0.137, 0.216, 1.0)   // [0.0 to 2.0] effect tint RGB
  307.  
  308. /*==============================================================================*\
  309. |                     EFFECT PARAMETERS - DEPTH BASED EFFECTS                    |
  310. \*==============================================================================*/
  311.  
  312. /*==============================================================================*/
  313. //AMBIENT OCCLUSION - GLOBAL PARAMETERS
  314. #define AO_METHOD           1   //[1 to 2] 1: SSAO | 2: Raymarch AO | 3: HBAO | 4: SSGI
  315. #define AO_SHARPNESS            0.7 //[0.05 to 2.0] 1: AO sharpness, higher means more sharp geometry edges but noisier AO, less means smoother AO but blurry in the distance.
  316. #define AO_DEBUG            0   //[0 to 2] Enables raw debug output. 1: occlusion | 2: color bouncing (SSGI only!)
  317. #define AO_LUMINANCE_CONSIDERATION  1   //[0 or 1] Enables dampening of AO intensity on bright pixels, to preserve bright light sprites or beter lit areas. Not for GI!
  318. #define AO_LUMINANCE_LOWER      0.3 //[0.0 to 1.0] Lower brightness threshold where AO starts to fade out. Below this threshold AO has full power.
  319. #define AO_LUMINANCE_UPPER      0.6 //[0.0 to 1.0] Upper brightness threshold where AO starts to fade out. Above this threshold AO is 0.
  320.  
  321. //AMBIENT OCCLUSION - SSAO
  322. #define iSSAOSamples            16  //[32 to 128] Amount of samples. Don't set too high or shader compilation time goes through the roof.
  323. #define fSSAOSamplingRange      50.0    //[10.0 to 50.0] SSAO sampling range. High range values might need more samples so raise both.
  324. #define fSSAODarkeningAmount        1.5 //[0.0 to 5.0] Amount of SSAO corner darkening
  325. #define fSSAOBrighteningAmount      1.0 //[0.0 to 5.0] Amount of SSAO edge brightening
  326.  
  327. //AMBIENT OCCLUSION - RAYMARCH AO
  328. #define iRayAOSamples           24  //[10 to 78] Amount of sample "rays" Higher means more accurate AO but also less performance.
  329. #define fRayAOSamplingRange         0.0005  //[0.0001 to 0.02] Range of AO sampling. Higher values ignore small geometry details and shadow more globally.
  330. #define fRayAOMaxDepth          0.02    //[0.01 to 0.2] Range clip factor to avoid far objects to occlude close objects just because they are besides each other on screen.
  331. #define fRayAOMinDepth          0.00003 //[0.000 to 0.001] Minimum depth difference cutoff to prevent (almost) flat surfaces to occlude themselves.
  332. #define fRayAOPower         2.0 //[0.2 to 5.0] Amount of darkening.
  333.  
  334. //AMBIENT OCCLUSION - HBAO
  335. #define iHBAOSamples            9   //[7 to 36] Amount of samples. Higher means more accurate AO but also less performance.
  336. #define fHBAOSamplingRange      2.6 //[0.5 to 5.0] Range of HBAO sampling. Higher values ignore small geometry details and shadow more globally.
  337. #define fHBAOAmount         3.0 //[1.0 to 10.0] Amount of HBAO shadowing.
  338. #define fHBAOClamp          0.1 //[0.0 to 1.0] Clamps HBAO power. 0.0 means full power, 1.0 means no HBAO.
  339. #define fHBAOAttenuation        0.02    //[0.001 to 0.2] Affects the HBAO range, prevents shadowing of very far objects which are close in screen space.
  340.  
  341. //AMBIENT OCCLUSION - SSGI
  342. #define iSSGISamples            9   //[5 to 24] Amount of SSGI sampling iterations, higher means better GI but less performance.
  343. #define fSSGISamplingRange      0.4 //[5.0 to 80.0] Radius of SSGI sampling.
  344. #define fSSGIIlluminationMult       4.5 //[1.0 to 8.0] Multiplier of SSGI illumination (color bouncing/reflection).
  345. #define fSSGIOcclusionMult      0.8 //[1.0 to 10.0] Multiplier of SSGI occlusion.
  346. #define fSSGIModelThickness         10.0    //[0.5 to 100.0] Amount of unit spaces the algorithm assumes the model's thickness. Lower if scene only contains small objects.
  347. #define fSSGISaturation         1.8 //[0.2 to 2.0] Saturation of bounced/reflected colors.
  348.  
  349. /*==============================================================================*/
  350. //DEPTH OF FIELD - GLOBAL PARAMETERS
  351. #define DOF_METHOD          2   //[1 to 4] 1: Ring DOF(Petka/martinsh) 2: Magic DOF 3: GP65CJ042 DOF 4: Matso DOF
  352. #define DOF_FOCUSPOINT          float2(0.5,0.5) //[0.0 to 1.0] Screen coordinates of focus point. First value is horizontal, second value is vertical position. 0 is left/upper, 1 is right/lower.
  353. #define DOF_NEARBLURCURVE       10.0    //[0.4 to X] Power of blur of closer-than-focus areas.
  354. #define DOF_FARBLURCURVE        0.5 //[0.4 to X] Elementary, my dear Watson: Blur power of areas behind focus plane.
  355. #define DOF_BLURRADIUS          15.0    //[5.0 to 50.0] Blur radius approximately in pixels. Radius, not diameter.
  356. #define DOF_MANUALFOCUS         0   //[0 or 1] Enables manual focus.    
  357. #define DOF_MANUALFOCUSDEPTH        0.1 //[0.0 to 1.0] Manual focus depth. 0.0 means camera is focus plane, 1.0 means sky is focus plane.
  358.  
  359. //DEPTH OF FIELD - RING DOF
  360. #define iRingDOFSamples         6   //[5 to 30] Samples on the first ring. The other rings around have more samples
  361. #define iRingDOFRings           4   //[1 to 8] Ring count
  362. #define fRingDOFThreshold       2.5     //[0.8 to 2.0] Threshold for bokeh brightening. Above this value, everything gets much much brighter. 1.0 is maximum value for LDR games like GTASA, higher values work only on HDR games like Skyrim etc.
  363. #define fRingDOFGain            0.1     //[0.1 to 2.0] Amount of brightening for pixels brighter than threshold.
  364. #define fRingDOFBias            0.0     //[0.1 to 2.0] bokeh bias.
  365. #define fRingDOFFringe          0.5     //[0.0 to 1.0] Amount of chromatic abberation
  366.  
  367. //DEPTH OF FIELD - MAGIC DOF
  368. #define iMagicDOFBlurQuality        2   //[1 to 30] Blur quality as control value over tap count. Quality 15 produces 721 taps, impossible with other DOF shaders by far, most they can do is about 150.
  369. #define fMagicDOFColorCurve         3.0 //[1.0 to 10.0] DOF weighting curve.
  370.  
  371. //DEPTH OF FIELD - GP65CJ042 DOF
  372. #define iGPDOFQuality           6   //[0 to 7] 0: only slight gaussian farblur but no bokeh. 1-7 bokeh blur, higher means better quality of blur but less fps.
  373. #define bGPDOFPolygonalBokeh        1   //[0 or 1] Enables polygonal bokeh shape, e.g. POLYGON_NUM 5 means pentagonal bokeh shape. Setting this value to 0 results in circular bokeh shape.
  374. #define iGPDOFPolygonCount      5   //[3 to 9] Controls the amount pf polygons for polygonal bokeh shape. 3 = triangular, 4 = square, 5 = pentagonal etc.  
  375. #define fGPDOFBias          0.00    //[0.0 to 20.0] Shifts bokeh weighting to bokeh shape edge. Set to 0 for even bright bokeh shapes, raise it for darker bokeh shapes in center and brighter on edge.
  376. #define fGPDOFBiasCurve         0.0 //[0.0 to 3.0] Power of Bokeh Bias. Raise for more defined bokeh outlining on bokeh shape edge.
  377. #define fGPDOFBrightnessThreshold   1.8 //[0.6 to 2.0] Threshold for bokeh brightening. Above this value, everything gets much much brighter. 1.0 is maximum value for LDR games like GTASA, higher values work only on HDR games like Skyrim etc.
  378. #define fGPDOFBrightnessMultiplier  2.00    //[0.0 to 2.0] Amount of brightening for pixels brighter than fGPDOFBrightnessThreshold.
  379. #define fGPDOFChromaAmount      0.0 //[0.00 to 0.4] Amount of color shifting applied on blurred areas.
  380.  
  381. //DEPTH OF FIELD - MATSO DOF
  382. #define bMatsoDOFChromaEnable       1   //[0 or 1] Enables Chromatic Abberation.
  383. #define bMatsoDOFBokehEnable        1   //[0 or 1] Enables Bokeh weighting do define bright light spots and increase bokeh shape definiton.
  384. #define fMatsoDOFChromaPow      1.4 //[0.2 to 3.0] Amount of chromatic abberation color shifting.
  385. #define fMatsoDOFBokehCurve     8.0 //[0.5 to 20.0] Bokeh curve.
  386. #define fMatsoDOFBokehLight     0.012   //[0.0 to 2.0] Bokeh brightening factor.
  387. #define iMatsoDOFBokehQuality       2   //[1 to 10] Blur quality as control value over tap count.
  388. #define fMatsoDOFBokehAngle     0   //[0 to 360] Rotation angle of bokeh shape.
  389.  
  390. /*==============================================================================*\
  391. |                      EFFECT PARAMETERS - IMAGE ENHANCEMENTS                    |
  392. \*==============================================================================*/
  393.  
  394. //SHARPEN
  395. #define fSharpBias                  0.05    //[0.05 to 1.0] How big the sharpen offset is (used to compare neighbor pixels to get sharpen amount
  396. #define fSharpStrength          0.3 //[0.05 to 1.0] Amount of sharpening you want.
  397. #define fSharpClamp             0.2 //[0.2 to 2.0] Clamps the sharpening to a maximum amount to prevent aliasing
  398.  
  399. //FISHEYE, CHROMATIC ABBERATION
  400. #define fFisheyeZoom            0.498   //[0.5 to 1.0] some lens zoom to hide bugged edges due to texcoord modification
  401. #define fFisheyeDistortion      0.0     //[-0.3 to 0.3] distortion of image, fish eye effect
  402. #define fFisheyeDistortionCubic     0.0 //[-0.3 to 0.3] distortion of image, fish eye effect, cube based
  403. #define fFisheyeColorshift      -0.006   //[-0.1 to 0.1] Amount of color shifting
  404.  
  405. //IMAGE GRAIN
  406. #define fGrainSaturation        1.0 //[0.0 to 2.0] Saturation of Grain. Higher means more colored noise, 0.0 means blacknwhite no TV signal noise.
  407. #define fGrainIntensityBright       0.0 //[0.0 to 2.0] Intensity of Grain in bright areas.
  408. #define fGrainIntensityMid      0.0 //[0.0 to 2.0] Intensity of Grain in midtone areas.
  409. #define fGrainIntensityDark         0.1 //[0.0 to 2.0] Intensity of Grain in dark areas.
  410.  
  411. //EXPLOSION
  412. #define fExplosionRadius            10.5    //[0.2 to 100.0] Amount of effect you want.
  413.  
  414. //SMAA
  415. #define fSMAAThreshold          0.05    //[0.05 to 0.20] Edge detection Threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12.
  416. #define iSMAAMaxSearchSteps     64  //[0 to 98] Determines the radius SMAA will search for aliased edges
  417. #define iSMAAMaxSearchStepsDiag     32  //[0 to 32] Determines the radius SMAA will search for diagonal aliased edges
  418. #define iSMAACornerRounding     100 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default.
  419. #define iSMAAEdgeDetectionMode      2   //[1 to 3] 1: Luma edge detection 2: Color edge detection 3: Depth edge detection
  420. #define bSMAAPredication        0   //[0 or 1] Enables predication which uses BOTH the color and the depth texture for edge detection to more accurately detect edges.
  421. #define fSMAAPredicationThreshold   0.01    //[0.001 to 0.2] Threshold to be used in the depth buffer.                                      
  422. #define fSMAAPredicationScale       2.0 //[0.5 to 4.0] How much to scale the global Threshold used for luma or color edge detection when using predication
  423. #define fSMAAPredicationStrength    0.4 //[0.1 to 1.0] How much to locally decrease the Threshold.
  424. #define iSMAADebugOutput        0   //[0 to 4] 0: Normal | 1: edgesTex | 2: blendTex | 3: areaTex | 4: searchTex - Only for troubleshooting. Users don't need to mess with this.
  425.  
  426. //HEAT HAZE
  427. #define fHeatHazeSpeed          2.0 //[0.5 to 10.0] Speed of heathaze waves
  428. #define fHeatHazeOffset         5.0 //[0.5 to 20.0] Amount of image distortion caused by heathaze effect
  429. #define fHeatHazeTextureScale       1.0 //[0.5 to 5.0] Scale of source texture, affecting the tile size. Use Heathaze debug effect for better visible effect.
  430. #define fHeatHazeChromaAmount       0.6     //[0.0 to 2.0] Amount of color shift caused by heat haze. Linearly scales with fHeatHazeOffset.
  431. #define bHeatHazeDebug          0   //[0 or 1] Enables raw texture output for debugging purposes. Useful for texture experiments.
  432.  
  433. /*==============================================================================*\
  434. |                           EFFECT PARAMETERS - OVERLAYS                         |
  435. \*==============================================================================*/
  436.  
  437. //HD6VIGNETTE
  438. #define fHD6VignetteMode        1   //[1 to 3] Vignette Alignment 1: Left and right | 2: top and bottom | 3: corners.      
  439. #define fHD6VignetteTop         0.7 //[0.3 to 1.5] Top/left (depending on mode) height of bar.
  440. #define fHD6VignetteBottom      0.7 //[0.3 to 1.5] Bottom/right (depending on mode) height of bar.
  441. #define fHD6VignetteRoundness       0.0 //[0.0 to 100000.0] Amount of circularism (new word invented hoho), 0 means linear vignette, 100000.0 means rougly total circle.
  442. #define fHD6VignetteColorDistort    0.0     //[0.0 to 5.0] Distorts the colors.
  443. #define fHD6VignetteContrast        11.6    //[0.0 to 20.0] Contrast of vignette curve.
  444. #define fHD6VignetteBorder      6.5 //[0.0 to 5.0] Vignette Border factor.
  445.  
  446. //STANDARDVIGNETTE
  447. #define fVignetteAmount         2.9 //[0.0 to 5.0] Amount of vignette color change.
  448. #define fVignetteCurve          1.5 //[0.0 to 5.0] Curve of vignette color change.
  449. #define fVignetteRadius         0.95    //[0.0 to 5.0] Radius from center where vignette color change kicks in.
  450. #define fVignetteColor          float3(0.0, 0.0, 0.0) //[0.0 to 1.0] RGB vignette color.
  451.  
  452. //BORDER
  453. #define fBorderWidth float2(10,10)          //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels. If this is set to 0,0 then the border_ratio will be used instead
  454. #define fBorderRatio float(1920.0 / 1080.0)     //[0.1 to 10.0] Set the desired ratio for the visible area. You MUST use floating point - Integers do not work right.
  455. #define fBorderColor float3(1.0, 0.0, 0.0)      //[0.0 to 1.0] What color the border should be. In RGB colors, 0,0,0 is black, 1,1,1 is pure white.
  456.  
  457. //END
  458. #define DISABLESPLASH           0   //[0 or 1] Disables the "MasterEffect" splash screen everytime
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top