version.h

------------------------------------------------------------------------------------------------------------------------
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
[sudo] password for debian:
git:/opt/scripts/:[1583f354594aabfaff08dee2a4aabdfe61433024]
eeprom:[A335BNLTBWA51851BBWG0073]
model:[TI_AM335x_BeagleBone_Black_Wireless]
dogtag:[BeagleBoard.org Debian Buster IoT Image 2020-04-06]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot SPL 2019.04-00002-g07d5700e21 (Mar 06 2020 - 11:24:55 -0600)]:[location: dd MBR]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-g07d5700e21]:[location: dd MBR]
UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts]
UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0]
UBOOT: Loaded Overlay:[BB-ADC-00A0.bb.org-overlays]
UBOOT: Loaded Overlay:[BB-BBBW-WL1835-00A0.bb.org-overlays]
UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0.bb.org-overlays]
UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0.bb.org-overlays]
kernel:[4.19.94-ti-r68]
nodejs:[v10.24.0]
/boot/uEnv.txt Settings:
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>]
pkg:[bb-cape-overlays]:[4.14.20210821.0-0~buster+20210821]
pkg:[bb-customizations]:[1.20210810.1-0~buster+20210810]
pkg:[bb-usb-gadgets]:[1.20211012.0-0~buster+20211012]
pkg:[bb-wl18xx-firmware]:[1.20210922.2-0~buster+20211007]
pkg:[kmod]:[26-1]
pkg:[librobotcontrol]:[1.0.5-git20200715.0-0~buster+20200716]
pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal bluetooth netdev i2c gpio pwm eqep remoteproc admin spi iio docker tisdk weston-launch xenomai cloud9ide]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet]
dmesg | grep remote
[   12.881629] remoteproc remoteproc0: 4a334000.pru is available
[   12.885353] remoteproc remoteproc1: 4a338000.pru is available
[   47.444398] Bluetooth: hci0: change remote baud rate command in firmware
[   63.532868] remoteproc remoteproc2: wkup_m3 is available
[   63.703758] remoteproc remoteproc2: powering up wkup_m3
[   63.703797] remoteproc remoteproc2: Booting fw image am335x-pm-firmware.elf, size 217148
[   63.704095] remoteproc remoteproc2: remote processor wkup_m3 is now up
dmesg | grep pru
[   12.881629] remoteproc remoteproc0: 4a334000.pru is available
[   12.881825] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed successfully
[   12.885353] remoteproc remoteproc1: 4a338000.pru is available
[   12.885540] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed successfully
dmesg | grep pinctrl-single
[    0.954530] pinctrl-single 44e10800.pinmux: 142 pins, size 568
[    1.375766] pinctrl-single 44e10800.pinmux: pin PIN74 already requested by 481a6000.serial; cannot claim for leds
[    1.386155] pinctrl-single 44e10800.pinmux: pin-74 (leds) status -22
[    1.392571] pinctrl-single 44e10800.pinmux: could not request pin 74 (PIN74) from group pinmux_bt_pins  on device pinctrl-single
dmesg | grep gpio-of-helper
[    0.967953] gpio-of-helper ocp:cape-universal: ready
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END