API tools faq
paste
Advertisement
Astralix

dSS11-1GB Booting 3.14.0+

Astralix
Apr 8th, 2014
19
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.72 KB | None | 0 0
raw download clone embed print report
  1. Filename '/uImage'.
  2. Load address: 0x22000000
  3. Loading: #################################################################
  4. #################################################################
  5. ###############################
  6. done
  7. Bytes transferred = 2356463 (23f4ef hex)
  8. ## Booting kernel from Legacy Image at 22000000 ...
  9. Image Name: linux-3.14
  10. Image Type: ARM Linux Kernel Image (uncompressed)
  11. Data Size: 2356399 Bytes = 2.2 MiB
  12. Load Address: 20008000
  13. Entry Point: 20008000
  14. Verifying Checksum ... OK
  15. Loading Kernel Image ... OK
  16. OK
  17.  
  18. Starting kernel ...
  19.  
  20. Uncompressing Linux... done, booting the kernel.
  21. [ 0.000000] Booting Linux on physical CPU 0x0
  22. [ 0.000000] Linux version 3.14.0+ (uprinz@NTGNBDE782LX) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #20 Tue Apr 8 13:33:40 CEST 2014
  23. [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
  24. [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
  25. [ 0.000000] Machine model: Atmel at91sam9g20ek
  26. [ 0.000000] Memory policy: Data cache writeback
  27. [ 0.000000] AT91: Detected soc type: at91sam9g20
  28. [ 0.000000] AT91: sram at 0x2fc000 of 0x8000 mapped at 0xfef70000
  29. [ 0.000000] Clocks: CPU 396 MHz, master 132 MHz, main 18.432 MHz
  30. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  31. [ 0.000000] Kernel command line: console=ttyS0,115200 root=ubi0:dss11-1gb-rootfs ubi.mtd=3,4096 rw rootfstype=ubifs mtdparts=atmel_nand:4M(kernel-rescue),4M(kernel-prod),32M(rootfs-rescue),976M(rootfs-prod),-(config)
  32. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  33. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  34. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  35. [ 0.000000] Memory: 60256K/65536K available (3221K kernel code, 168K rwdata, 972K rodata, 136K init, 94K bss, 5280K reserved)
  36. [ 0.000000] Virtual kernel memory layout:
  37. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  38. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  39. [ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
  40. [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
  41. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  42. [ 0.000000] .text : 0xc0008000 - 0xc04208e4 (4195 kB)
  43. [ 0.000000] .init : 0xc0421000 - 0xc04432ec ( 137 kB)
  44. [ 0.000000] .data : 0xc0444000 - 0xc046e0a0 ( 169 kB)
  45. [ 0.000000] .bss : 0xc046e0a0 - 0xc0485b58 ( 95 kB)
  46. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  47. [ 0.000000] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777216000000000ns
  48. [ 0.000000] Console: colour dummy device 80x30
  49. [ 0.054687] Calibrating delay loop... 197.44 BogoMIPS (lpj=770048)
  50. [ 0.054687] pid_max: default: 32768 minimum: 301
  51. [ 0.054687] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  52. [ 0.054687] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  53. [ 0.062500] CPU: Testing write buffer coherency: ok
  54. [ 0.062500] Setting up static identity map for 0x2030da68 - 0x2030daa4
  55. [ 0.062500] devtmpfs: initialized
  56. [ 0.062500] pinctrl core: initialized pinctrl subsystem
  57. [ 0.062500] NET: Registered protocol family 16
  58. [ 0.062500] DMA: preallocated 256 KiB pool for atomic coherent allocations
  59. [ 0.085937] No ATAGs?
  60. [ 0.085937] gpio-at91 fffff400.gpio: at address fefff400
  61. [ 0.085937] gpio-at91 fffff600.gpio: at address fefff600
  62. [ 0.085937] gpio-at91 fffff800.gpio: at address fefff800
  63. [ 0.093750] pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver
  64. [ 0.125000] usbcore: registered new interface driver usbfs
  65. [ 0.125000] usbcore: registered new interface driver hub
  66. [ 0.125000] usbcore: registered new device driver usb
  67. [ 0.132812] i2c-gpio i2c.3: using pins 23 (SDA) and 24 (SCL)
  68. [ 0.132812] Switched to clocksource tcb_clksrc
  69. [ 0.179687] NET: Registered protocol family 2
  70. [ 0.179687] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  71. [ 0.179687] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  72. [ 0.179687] TCP: Hash tables configured (established 1024 bind 1024)
  73. [ 0.179687] TCP: reno registered
  74. [ 0.179687] UDP hash table entries: 256 (order: 0, 4096 bytes)
  75. [ 0.179687] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  76. [ 0.179687] NET: Registered protocol family 1
  77. [ 0.187500] futex hash table entries: 256 (order: -1, 3072 bytes)
  78. [ 0.187500] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  79. [ 0.187500] msgmni has been set to 117
  80. [ 0.187500] io scheduler noop registered (default)
  81. [ 0.187500] io scheduler deadline registered
  82. [ 0.187500] io scheduler cfq registered
  83. [ 0.195312] fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8256000) is a ATMEL_SERIAL
  84. [ 0.500000] console [ttyS0] enabled
  85. [ 0.500000] fffb4000.serial: ttyS2 at MMIO 0xfffb4000 (irq = 26, base_baud = 8256000) is a ATMEL_SERIAL
  86. [ 0.515625] brd: module loaded
  87. [ 0.531250] loop: module loaded
  88. [ 0.546875] atmel_nand 40000000.nand: No DMA support for NAND access.
  89. [ 0.554687] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x38
  90. [ 0.562500] nand: Micron MT29F8G08ABABAWP
  91. [ 0.562500] nand: 1024MiB, SLC, page size: 4096, OOB size: 224
  92. [ 0.570312] Scanning device for bad blocks
  93. [ 0.664062] 5 cmdlinepart partitions found on MTD device atmel_nand
  94. [ 0.671875] Creating 5 MTD partitions on "atmel_nand":
  95. [ 0.679687] 0x000000000000-0x000000400000 : "kernel-rescue"
  96. [ 0.687500] 0x000000400000-0x000000800000 : "kernel-prod"
  97. [ 0.695312] 0x000000800000-0x000002800000 : "rootfs-rescue"
  98. [ 0.703125] 0x000002800000-0x00003f800000 : "rootfs-prod"
  99. [ 0.710937] 0x00003f800000-0x000040000000 : "config"
  100. [ 0.718750] atmel_spi fffc8000.spi: version: 0x199
  101. [ 0.726562] atmel_spi fffc8000.spi: Atmel SPI Controller at 0xfffc8000 (irq 30)
  102. [ 0.734375] m25p80 spi32766.0: m25p40-nonjedec (512 Kbytes)
  103. [ 0.757812] libphy: MACB_mii_bus: probed
  104. [ 0.835937] macb fffc4000.ethernet eth0: Cadence MACB at 0xfffc4000 irq 27 (a8:99:5c:00:0b:0a)
  105. [ 0.843750] macb fffc4000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fffc4000.etherne:03, irq=-1)
  106. [ 0.851562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  107. [ 0.859375] ehci-atmel: EHCI Atmel driver
  108. [ 0.859375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  109. [ 0.867187] ohci-atmel: OHCI Atmel driver
  110. [ 0.875000] at91_ohci 500000.ohci: OHCI Host Controller
  111. [ 0.882812] at91_ohci 500000.ohci: new USB bus registered, assigned bus number 1
  112. [ 0.882812] at91_ohci 500000.ohci: irq 32, io mem 0x00500000
  113. [ 0.953125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  114. [ 0.960937] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  115. [ 0.968750] usb usb1: Product: OHCI Host Controller
  116. [ 0.968750] usb usb1: Manufacturer: Linux 3.14.0+ ohci_hcd
  117. [ 0.976562] usb usb1: SerialNumber: at91
  118. [ 0.984375] hub 1-0:1.0: USB hub found
  119. [ 0.984375] hub 1-0:1.0: 2 ports detected
  120. [ 0.992187] usbcore: registered new interface driver cdc_acm
  121. [ 1.000000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  122. [ 1.007812] usbcore: registered new interface driver usbserial
  123. [ 1.015625] usbcore: registered new interface driver usbserial_generic
  124. [ 1.015625] usbserial: USB Serial support registered for generic
  125. [ 1.148437] at91_rtc fffffd30.rtc: rtc core: registered fffffd30.rtc as rtc0
  126. [ 1.156250] at91_rtc fffffd30.rtc: AT91 Real Time Clock driver.
  127. [ 1.164062] rtc-rs5c372 0-0032: rs5c372a found, 24hr, driver version 0.6
  128. [ 1.171875] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc1
  129. [ 1.179687] lm75 0-0048: hwmon0: sensor 'lm75'
  130. [ 1.195312] usbcore: registered new interface driver usbhid
  131. [ 1.203125] usbhid: USB HID core driver
  132. [ 1.203125] TCP: cubic registered
  133. [ 1.210937] NET: Registered protocol family 10
  134. [ 1.210937] sit: IPv6 over IPv4 tunneling driver
  135. [ 1.226562] NET: Registered protocol family 17
  136. [ 1.234375] Key type encrypted registered
  137. [ 1.242187] UBI: attaching mtd3 to ubi0
  138. [ 3.546875] UBI: scanning is finished
  139. [ 3.570312] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 19, need 40
  140. [ 3.578125] UBI: attached mtd3 (name "rootfs-prod", size 976 MiB) to ubi0
  141. [ 3.585937] UBI: PEB size: 524288 bytes (512 KiB), LEB size: 516096 bytes
  142. [ 3.593750] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 1024
  143. [ 3.601562] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
  144. [ 3.609375] UBI: good PEBs: 1952, bad PEBs: 0, corrupted PEBs: 0
  145. [ 3.617187] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  146. [ 3.617187] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 974153717
  147. [ 3.625000] UBI: available PEBs: 0, total reserved PEBs: 1952, PEBs reserved for bad PEB handling: 19
  148. [ 3.632812] UBI: background thread "ubi_bgt0d" started, PID 441
  149. [ 3.640625] input: gpio_keys.5 as /devices/gpio_keys.5/input/input0
  150. [ 3.648437] at91_rtc fffffd30.rtc: hctosys: invalid date/time
  151. [ 3.734375] UBIFS: background thread "ubifs_bgt0_0" started, PID 452
  152. [ 4.000000] UBIFS: mounted UBI device 0, volume 0, name "dss11-1gb-rootfs"
  153. [ 4.007812] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
  154. [ 4.015625] UBIFS: FS size: 990388224 bytes (944 MiB, 1919 LEBs), journal size 10452992 bytes (9 MiB, 21 LEBs)
  155. [ 4.023437] UBIFS: reserved for root: 0 bytes (0 KiB)
  156. [ 4.031250] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 19201D95-9934-48A8-8485-EC2EF22717E0, small LPT model
  157. [ 4.046875] VFS: Mounted root (ubifs filesystem) on device 0:12.
  158. [ 4.054687] devtmpfs: mounted
  159. [ 4.054687] Freeing unused kernel memory: 136K (c0421000 - c0443000)
  160. INIT: version 2.88 booting
  161. Starting udev[ 6.531250] UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
  162.  
  163. vm.min_free_kbytes = 4200
  164. Starting atd: OK
  165. Configuring network interfaces... [ 9.468750] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  166. udhcpc: option -h NAME is deprecated, use -x hostname:NAME
  167. udhcpc (v1.21.1) started
  168. Sending discover...
  169. [ 10.898437] macb fffc4000.ethernet eth0: link up (100/Full)
  170. [ 10.898437] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  171. Sending discover...
  172. Sending discover...
  173. Sending select for 10.0.0.195...
  174. Lease of 10.0.0.195 obtained, lease time 691200
  175. /etc/udhcpc.d/50default: Adding DNS 10.0.0.4
  176. /etc/udhcpc.d/50default: Adding DNS 10.0.0.3
  177. fail: upnpbeacon: runsv not running
  178. run-parts: /etc/udhcpc.d/99upnpbeacon exited with code 1
  179. done.
  180. Starting portmap daemon...
  181. INIT: Entering runlevel: 5
  182. Starting system message bus: [ 16.007812] random: dbus-daemon urandom read with 17 bits of entropy available
  183. dbus.
  184. Starting Dropbear SSH server: dropbear.
  185. Starting ntpd: done
  186. Starting syslogd/klogd: done
  187. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
  188. ...done.
  189. Checking SSL availability of certificates... ok
  190. * starting dSS11 buttond: dss11-buttond... done.
  191. Stopping running services...
  192. Starting runit service supervisor: runsvdir.
  193. Starting crond: OK
  194. Enabling coredumps
  195. dSS11 WebSetup: checking old cron entries...done.
  196.  
  197. .---O---.
  198. | | .-. o o
  199. | | |-----.-----.-----.| | .----..-----.-----.
  200. | | | __ | ---'| '--.| .-'| | |
  201. | | | | | |--- || --'| | | ' | | | |
  202. '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
  203. -' |
  204. '---'
  205.  
  206. The Angstrom Distribution dSS ttyS0
  207.  
  208. Angstrom v2014.02-core - Kernel 3.14.0+
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!