Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2018.01-1 (Feb 13 2018 - 02:19:55 +0000) Arch Linux ARM
- CPU: Exynos4412 @ 1 GHz
- Model: Odroid based on Exynos4412
- Board: Odroid based on Exynos4412
- Type: u3
- DRAM: 2 GiB
- LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling
- LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling
- LDO21@TFLASH_2.8V: set 2800000 uV; enabling
- MMC: sdhci@12530000 - probe failed: -19
- *** Warning - bad CRC, using default environment
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- no mmc device at slot 1
- switch to partitions #0, OK
- mmc0(part 0) is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 770 bytes read in 35 ms (21.5 KiB/s)
- ## Executing script at 50000000
- 6819240 bytes read in 278 ms (23.4 MiB/s)
- 54019 bytes read in 479 ms (109.4 KiB/s)
- 6516963 bytes read in 251 ms (24.8 MiB/s)
- Kernel image @ 0x42000000 [ 0x000000 - 0x680da8 ]
- ## Flattened Device Tree blob at 43000000
- Booting using the fdt blob at 0x43000000
- Loading Ramdisk to 4f9c8000, end 4ffff0e3 ... OK
- Loading Device Tree to 4f9b7000, end 4f9c7302 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0xa00
- [ 0.000000] Linux version 5.0.0-rc6-u3ml (root@archl-u3e) (gcc version 8.2.1 20181127 (GCC)) #27 SMP PREEMPT Fri Feb 15 18:49:03 IST 2019
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: Hardkernel ODROID-U3 board based on Exynos4412
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] Reserved memory: created DMA memory pool at 0xbf700000, size 8 MiB
- [ 0.000000] OF: reserved mem: initialized node region_mfc_right, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: created DMA memory pool at 0xbd300000, size 36 MiB
- [ 0.000000] OF: reserved mem: initialized node region_mfc_left, compatible id shared-dma-pool
- [ 0.000000] cma: Reserved 96 MiB at 0xb7000000
- [ 0.000000] Samsung CPU ID: 0xe4412220
- [ 0.000000] Running under secure firmware.
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x478 with crng_init=0
- [ 0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s42408 r8192 d23128 u73728
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 511232
- [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200n8 root=PARTUUID=d4048f8b-01 rw rootwait smsc95xx.macaddr=C2:22:09:F2:5F:E8
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1905388K/2051072K available (10240K kernel code, 813K rwdata, 3292K rodata, 1024K init, 7461K bss, 47380K reserved, 98304K cma-reserved, 1166336K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (11232 kB)
- [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
- [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 814 kB)
- [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7462 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Running RCU self tests
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU lockdep checking is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] L2C: platform modifies aux control register: 0x02070000 -> 0x3e470001
- [ 0.000000] L2C: platform provided aux values permit register corruption.
- [ 0.000000] L2C: DT/platform modifies aux control register: 0x02070000 -> 0x3e470001
- [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
- [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
- [ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines
- [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
- [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
- [ 0.000000] L2C-310: CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001
- [ 0.000000] Exynos4x12 clocks: sclk_apll = 1000000000, sclk_mpll = 800000000
- [ 0.000000] sclk_epll = 45158401, sclk_vpll = 350000000, arm_clk = 1000000000
- [ 0.000000] Switching to timer-based delay loop, resolution 41ns
- [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000005] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
- [ 0.000456] Console: colour dummy device 80x30
- [ 0.003165] printk: console [tty1] enabled
- [ 0.003209] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.003276] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.003317] ... MAX_LOCK_DEPTH: 48
- [ 0.003358] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.003400] ... CLASSHASH_SIZE: 4096
- [ 0.003443] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.003486] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.003528] ... CHAINHASH_SIZE: 32768
- [ 0.003571] memory used by lock dependency info: 4591 kB
- [ 0.003620] per task-struct memory footprint: 1536 bytes
- [ 0.003729] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.003820] pid_max: default: 32768 minimum: 301
- [ 0.004118] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.004184] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.006061] CPU: Testing write buffer coherency: ok
- [ 0.006158] CPU0: Spectre v2: using BPIALL workaround
- [ 0.007273] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [ 0.060080] Setting up static identity map for 0x40100000 - 0x40100060
- [ 0.080011] rcu: Hierarchical SRCU implementation.
- [ 0.130013] smp: Bringing up secondary CPUs ...
- [ 0.210550] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [ 0.210558] CPU1: Spectre v2: using BPIALL workaround
- [ 0.290381] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [ 0.290389] CPU2: Spectre v2: using BPIALL workaround
- [ 0.370356] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [ 0.370364] CPU3: Spectre v2: using BPIALL workaround
- [ 0.370785] smp: Brought up 1 node, 4 CPUs
- [ 0.370845] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- [ 0.370916] CPU: All CPU(s) started in SVC mode.
- [ 0.373592] devtmpfs: initialized
- [ 0.412108] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 0.413571] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.413713] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.416974] pinctrl core: initialized pinctrl subsystem
- [ 0.418882] /soc/lcd0-power-domain@10023c80 has as child subdomain: /soc/tv-power-domain@10023c20.
- [ 0.422313] NET: Registered protocol family 16
- [ 0.425940] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.429644] cpuidle: using governor menu
- [ 0.430269] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.430421] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.453279] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 73
- [ 0.649916] SCSI subsystem initialized
- [ 0.650665] usbcore: registered new interface driver usbfs
- [ 0.650881] usbcore: registered new interface driver hub
- [ 0.651137] usbcore: registered new device driver usb
- [ 0.652240] s3c-i2c 13860000.i2c: slave address 0x00
- [ 0.652322] s3c-i2c 13860000.i2c: bus frequency set to 390 KHz
- [ 0.653878] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter
- [ 0.654249] s3c-i2c 13870000.i2c: slave address 0x00
- [ 0.654317] s3c-i2c 13870000.i2c: bus frequency set to 97 KHz
- [ 0.655151] s3c-i2c 13870000.i2c: i2c-1: S3C I2C adapter
- [ 0.655488] s3c-i2c 13880000.i2c: slave address 0x00
- [ 0.655556] s3c-i2c 13880000.i2c: bus frequency set to 97 KHz
- [ 0.656122] s3c-i2c 13880000.i2c: i2c-2: S3C I2C adapter
- [ 0.656389] s3c-i2c 138e0000.i2c: slave address 0x00
- [ 0.656456] s3c-i2c 138e0000.i2c: bus frequency set to 97 KHz
- [ 0.657263] s3c-i2c 138e0000.i2c: i2c-8: S3C I2C adapter
- [ 0.659011] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.660937] nfc: nfc_init: NFC Core ver 0.1
- [ 0.661195] NET: Registered protocol family 39
- [ 0.662103] clocksource: Switched to clocksource mct-frc
- [ 1.144708] NET: Registered protocol family 2
- [ 1.146509] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes)
- [ 1.146665] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 1.146852] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
- [ 1.147667] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.148115] UDP hash table entries: 512 (order: 3, 40960 bytes)
- [ 1.148323] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
- [ 1.148803] NET: Registered protocol family 1
- [ 1.150489] RPC: Registered named UNIX socket transport module.
- [ 1.150607] RPC: Registered udp transport module.
- [ 1.150667] RPC: Registered tcp transport module.
- [ 1.150725] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.152372] Trying to unpack rootfs image as initramfs...
- [ 1.546064] Freeing initrd memory: 6368K
- [ 1.546804] hw perfevents: no interrupt-affinity property for /soc/pmu, guessing.
- [ 1.547803] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- [ 1.552258] Initialise system trusted keyrings
- [ 1.552872] workingset: timestamp_bits=30 max_order=19 bucket_order=0
- [ 1.574228] NFS: Registering the id_resolver key type
- [ 1.574406] Key type id_resolver registered
- [ 1.574511] Key type id_legacy registered
- [ 1.574681] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
- [ 1.744236] Key type asymmetric registered
- [ 1.744441] Asymmetric key parser 'x509' registered
- [ 1.744726] bounce: pool size: 64 pages
- [ 1.744858] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 1.745007] io scheduler mq-deadline registered
- [ 1.745068] io scheduler kyber registered
- [ 1.748651] samsung-usb2-phy 125b0000.exynos-usbphy: 125b0000.exynos-usbphy supply vbus not found, using dummy regulator
- [ 1.749234] samsung-usb2-phy 125b0000.exynos-usbphy: Linked as a consumer to regulator.0
- [ 1.765010] dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-141330
- [ 1.765099] dma-pl330 12680000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 1.771264] dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-141330
- [ 1.771349] dma-pl330 12690000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 1.773486] dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-141330
- [ 1.773571] dma-pl330 12850000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 1.911724] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 1.915981] 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 52, base_baud = 0) is a S3C6400/10
- [ 1.917054] 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 53, base_baud = 0) is a S3C6400/10
- [ 2.855973] printk: console [ttySAC1] enabled
- [ 2.863216] iommu: Adding device 12c10000.mixer to group 0
- [ 2.866485] exynos-mixer 12c10000.mixer: Linked as a consumer to 12e20000.sysmmu
- [ 2.876794] exynos-hdmi 12d00000.hdmi: Failed to get supply 'vdd': -517
- [ 2.906011] brd: module loaded
- [ 2.930046] loop: module loaded
- [ 2.934775] LDO2: regulator suspend disable supported
- [ 2.939487] LDO6: regulator suspend disable supported
- [ 2.941098] LDO7: regulator suspend disable supported
- [ 2.948483] LDO11: regulator suspend disable supported
- [ 2.950963] LDO12: regulator suspend disable supported
- [ 2.957325] LDO14: regulator suspend disable supported
- [ 2.961302] LDO15: regulator suspend disable supported
- [ 2.966340] random: fast init done
- [ 2.968419] LDO16: regulator suspend disable supported
- [ 2.984847] BUCK1: regulator suspend disable supported
- [ 2.988490] BUCK3: regulator suspend disable supported
- [ 2.991509] BUCK4: regulator suspend disable supported
- [ 3.003929] s3c64xx-spi 13930000.spi: spi bus clock parent not specified, using clock at index 0 as parent
- [ 3.008038] s3c64xx-spi 13930000.spi: number of chip select lines not specified, assuming 1 chip select line
- [ 3.020645] libphy: Fixed MDIO Bus: probed
- [ 3.022406] usbcore: registered new interface driver r8152
- [ 3.027446] usbcore: registered new interface driver asix
- [ 3.032851] usbcore: registered new interface driver ax88179_178a
- [ 3.038889] usbcore: registered new interface driver cdc_ether
- [ 3.044771] usbcore: registered new interface driver smsc75xx
- [ 3.050452] usbcore: registered new interface driver smsc95xx
- [ 3.056196] usbcore: registered new interface driver net1080
- [ 3.061790] usbcore: registered new interface driver cdc_subset
- [ 3.067749] usbcore: registered new interface driver zaurus
- [ 3.073341] usbcore: registered new interface driver cdc_ncm
- [ 3.080921] dwc2 12480000.hsotg: Linked as a consumer to regulator.15
- [ 3.085693] dwc2 12480000.hsotg: Linked as a consumer to regulator.12
- [ 3.092805] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1
- [ 3.098718] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024
- [ 3.107303] dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM
- [ 3.117523] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.121049] ehci-exynos: EHCI EXYNOS driver
- [ 3.126063] exynos-ehci 12580000.ehci: EHCI Host Controller
- [ 3.131089] exynos-ehci 12580000.ehci: new USB bus registered, assigned bus number 1
- [ 3.139056] exynos-ehci 12580000.ehci: irq 50, io mem 0x12580000
- [ 3.172124] exynos-ehci 12580000.ehci: USB 2.0 started, EHCI 1.00
- [ 3.173711] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
- [ 3.180916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.188155] usb usb1: Product: EHCI Host Controller
- [ 3.192977] usb usb1: Manufacturer: Linux 5.0.0-rc6-u3ml ehci_hcd
- [ 3.199019] usb usb1: SerialNumber: 12580000.ehci
- [ 3.206098] hub 1-0:1.0: USB hub found
- [ 3.207588] hub 1-0:1.0: 3 ports detected
- [ 3.214287] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.217633] ohci-exynos: OHCI EXYNOS driver
- [ 3.222863] usbcore: registered new interface driver uas
- [ 3.227177] usbcore: registered new interface driver usb-storage
- [ 3.254680] usb3503 0-0008: switched to HUB mode
- [ 3.254794] usb3503 0-0008: usb3503_probe: probed in hub mode
- [ 3.260850] using random self ethernet address
- [ 3.263931] using random host ethernet address
- [ 3.269408] usb0: HOST MAC 6a:3f:8f:dd:fa:be
- [ 3.273164] usb0: MAC 46:fb:e2:76:89:04
- [ 3.276381] using random self ethernet address
- [ 3.280782] using random host ethernet address
- [ 3.285586] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
- [ 3.291822] g_ether gadget: g_ether ready
- [ 3.296188] dwc2 12480000.hsotg: bound driver g_ether
- [ 3.434116] max77686-rtc max77686-rtc: registered as rtc0
- [ 3.436646] s3c-rtc 10070000.rtc: registered as rtc1
- [ 3.439774] i2c /dev entries driver
- [ 3.450589] exynos-tmu 100c0000.tmu: Linked as a consumer to regulator.10
- [ 3.452396] thermal thermal_zone0: failed to read out thermal zone (-22)
- [ 3.461092] s3c2410-wdt 10060000.watchdog: watchdog inactive, reset disabled, irq disabled
- [ 3.467904] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
- [ 3.476326] cpu cpu0: Linked as a consumer to regulator.28
- [ 3.480948] cpu cpu0: Dropping the link to regulator.28
- [ 3.487995] cpu cpu0: Linked as a consumer to regulator.28
- [ 3.505626] sdhci: Secure Digital Host Controller Interface driver
- [ 3.506198] sdhci: Copyright(c) Pierre Ossman
- [ 3.510972] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (50000000 Hz)
- [ 3.518418] s3c-sdhci 12530000.sdhci: Got CD GPIO
- [ 3.523084] s3c-sdhci 12530000.sdhci: Linked as a consumer to regulator.21
- [ 3.529567] s3c-sdhci 12530000.sdhci: Linked as a consumer to regulator.4
- [ 3.565447] mmc0: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA
- [ 3.567717] Synopsys Designware Multimedia Card Interface Driver
- [ 3.575723] dwmmc_exynos 12550000.mmc: IDMAC supports 32-bit address mode.
- [ 3.580150] dwmmc_exynos 12550000.mmc: Using internal DMA controller.
- [ 3.586599] usb 1-2: new high-speed USB device number 2 using exynos-ehci
- [ 3.593594] dwmmc_exynos 12550000.mmc: Version ID is 240a
- [ 3.599097] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 110,32 bit host data width,128 deep fifo
- [ 3.608795] dwmmc_exynos 12550000.mmc: Linked as a consumer to regulator.20
- [ 3.615188] dwmmc_exynos 12550000.mmc: Linked as a consumer to regulator.22
- [ 3.622377] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq
- [ 3.627474] mmc_host mmc1: card is polling.
- [ 3.645384] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
- [ 3.698853] s5p-secss 10830000.sss: s5p-sss driver registered
- [ 3.700093] usbcore: registered new interface driver usbhid
- [ 3.704597] usbhid: USB HID core driver
- [ 3.712200] exynos-bus soc:bus_dmc: Linked as a consumer to regulator.27
- [ 3.717506] exynos-bus soc:bus_dmc: Dropping the link to regulator.27
- [ 3.729483] exynos-bus soc:bus_leftbus: Linked as a consumer to regulator.29
- [ 3.733033] exynos-bus soc:bus_leftbus: Dropping the link to regulator.29
- [ 3.744468] exynos-ppmu: new PPMU device registered 106a0000.ppmu_dmc0 (ppmu-event3-dmc0)
- [ 3.747487] exynos-ppmu: new PPMU device registered 106b0000.ppmu_dmc1 (ppmu-event3-dmc1)
- [ 3.755722] exynos-ppmu: new PPMU device registered 112a0000.ppmu_rightbus (ppmu-event3-rightbus)
- [ 3.764506] exynos-ppmu: new PPMU device registered 116a0000.ppmu_leftbus0 (ppmu-event3-leftbus)
- [ 3.781082] NET: Registered protocol family 10
- [ 3.783045] Segment Routing with IPv6
- [ 3.783621] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 3.790494] NET: Registered protocol family 17
- [ 3.794051] NET: Registered protocol family 15
- [ 3.798637] Key type dns_resolver registered
- [ 3.802832] usb 1-2: New USB device found, idVendor=0424, idProduct=9730, bcdDevice= 1.00
- [ 3.810789] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.812328] Registering SWP/SWPB emulation handler
- [ 3.821005] smsc95xx v1.0.6
- [ 3.823566] Loading compiled-in X.509 certificates
- [ 3.885682] exynos-hdmi 12d00000.hdmi: Linked as a consumer to regulator.8
- [ 3.887114] exynos-hdmi 12d00000.hdmi: Linked as a consumer to regulator.10
- [ 3.894191] OF: graph: no port node found in /soc/hdmi@12d00000
- [ 3.902569] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations
- [ 3.907932] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
- [ 3.912495] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
- [ 3.915244] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
- [ 3.932068] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 3.932779] smsc95xx 1-2:1.0 eth0: register 'smsc95xx' at usb-12580000.ehci-2, smsc95xx USB 2.0 Ethernet, c2:22:09:f2:5f:e8
- [ 3.938624] [drm] No driver support for vblank timestamp query.
- [ 3.939103] [drm] Cannot find any crtc or sizes
- [ 3.955544] mmc1: new DDR MMC card at address 0001
- [ 3.958150] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
- [ 3.961813] mmcblk1: mmc1:0001 SDW32G 29.1 GiB
- [ 3.967490] [drm] Cannot find any crtc or sizes
- [ 3.973188] mmcblk1boot0: mmc1:0001 SDW32G partition 1 4.00 MiB
- [ 3.976819] exynos-bus soc:bus_dmc: Linked as a consumer to regulator.27
- [ 3.982013] mmcblk1boot1: mmc1:0001 SDW32G partition 2 4.00 MiB
- [ 3.988139] exynos-bus: new bus device registered: soc:bus_dmc (100000 KHz ~ 400000 KHz)
- [ 3.994300] mmcblk1rpmb: mmc1:0001 SDW32G partition 3 4.00 MiB, chardev (247:0)
- [ 4.000889] exynos-bus: new bus device registered: soc:bus_acp (100000 KHz ~ 267000 KHz)
- [ 4.023824] exynos-bus: new bus device registered: soc:bus_c2c (100000 KHz ~ 400000 KHz)
- [ 4.032714] mmcblk1: p1
- [ 4.032740] exynos-bus soc:bus_leftbus: Linked as a consumer to regulator.29
- [ 4.033033] exynos-bus: new bus device registered: soc:bus_leftbus (100000 KHz ~ 200000 KHz)
- [ 4.050293] exynos-bus: new bus device registered: soc:bus_rightbus (100000 KHz ~ 200000 KHz)
- [ 4.058950] exynos-bus: new bus device registered: soc:bus_display (160000 KHz ~ 200000 KHz)
- [ 4.067109] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 134000 KHz)
- [ 4.075191] exynos-bus: new bus device registered: soc:bus_peri ( 50000 KHz ~ 100000 KHz)
- [ 4.083048] exynos-bus: new bus device registered: soc:bus_mfc (100000 KHz ~ 200000 KHz)
- [ 4.122170] usb 1-3: new high-speed USB device number 3 using exynos-ehci
- [ 4.133559] max98090 1-0010: MAX98090 REVID=0x43
- [ 4.138670] max98090 1-0010: use default 2.8v micbias
- [ 4.162695] odroid-audio sound: multicodec <-> samsung-i2s mapping ok
- [ 4.176177] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- [ 4.212219] max77686-rtc max77686-rtc: setting system clock to 2019-02-15T13:26:00 UTC (1550237160)
- [ 4.217111] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 4.265365] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 4.268376] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 4.275438] cfg80211: failed to load regulatory.db
- [ 4.322990] usb 1-3: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0
- [ 4.325636] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.335195] hub 1-3:1.0: USB hub found
- [ 4.336470] vdd_g3d: disabling
- [ 4.339844] hub 1-3:1.0: 3 ports detected
- [ 4.340476] ALSA device list:
- [ 4.346552] #0: Odroid-U3
- [ 4.356105] Freeing unused kernel memory: 1024K
- [ 4.403703] Run /init as init process
- :: running early hook [udev]
- Warning: /lib/modules/5.0.0-rc6-u3ml/modules.devname not found - ignoring
- Starting version 240
- :: running hook [udev]
- :: Triggering uevents...
- :: performing fsck on '/dev/mmcblk1p1'
- /dev/mmcblk1p1: clean, 189469/1908736 files, 2752207/7633408 blocks
- :: mounting '/dev/mmcblk1p1' on real root
- [ 6.622256] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
- :: running cleanup hook [udev]
- [ 7.359832] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 7.378934] systemd[1]: Detected architecture arm.
- Welcome to Arch Linux ARM!
- [ 7.429199] systemd[1]: Set hostname to <archl-u3e>.
- [ 7.839666] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 7.851676] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 8.147147] random: systemd: uninitialized urandom read (16 bytes read)
- [ 8.161615] random: systemd: uninitialized urandom read (16 bytes read)
- [ 8.165401] systemd[1]: Listening on udev Kernel Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ 8.203682] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
- [ 8.210444] random: systemd: uninitialized urandom read (16 bytes read)
- [ 8.220931] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ 8.269773] systemd[1]: Created slice User and Session Slice.
- [ OK ] Created slice User and Session Slice.
- [ 8.338921] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
- [ OK ] Started Forward Password R?uests to Wall Directory Watch.
- [ OK ] Started Dispatch Password ?ts to Console Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Listening on Device-mapper event daemon FIFOs.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on Journal Socket.
- Mounting Kernel Debug File System...
- Starting Create list of re?odes for the current kernel...
- Starting Remount Root and Kernel File Systems...
- [ OK ] Reached target Slices.
- [ OK ] Listening on LVM2 poll daemon socket.
- [ OK ] Listening on Journal Socket (/dev/log).
- Mounting Kernel Configuration File System...
- [ OK ] Reached target Paths.
- Starting Journal Service...
- [ OK ] Listening on udev Control Socket.
- Starting udev Coldplug all Devices...
- [ OK ] Listening on Network Service Netlink Socket.
- Starting Apply Kernel Variables...
- [ OK ] Reached target Remote File Systems.
- [ OK ] Listening on LVM2 metadata daemon socket.
- Starting Monitoring of LVM?meventd or progress polling...
- [ OK ] Reached target Swap.
- Mounting Temporary Directory (/tmp)...
- [ OK ] Listening on Process Core Dump Socket.
- [ OK ] Started Journal Service.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Started Create list of req? nodes for the current kernel.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Mounted Temporary Directory (/tmp).
- [ OK ] Started LVM2 metadata daemon.
- Starting Load/Save Random Seed...
- Starting Create Static Device Nodes in /dev...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- [ 9.894639] systemd-journald[189]: Received request to flush runtime journal from PID 1
- [ OK ] Started udev Kernel Device Manager.
- Starting Network Service...
- [ 10.495831] random: crng init done
- [ 10.496046] random: 7 urandom warning(s) missed due to ratelimiting
- [ OK ] Started Network Service.
- [ 10.922462] media: Linux media interface: v0.10
- [ OK ] Started udev Coldplug all Devices.
- [ 11.020237] videodev: Linux video capture interface: v2.00
- [ OK ] Found device /dev/ttySAC1.
- [ OK ] Started Flush Journal to Persistent Storage.
- [ 11.253923] iommu: Adding device 13400000.codec to group 1
- [ 11.262971] s5p-mfc 13400000.codec: Linked as a consumer to 13620000.sysmmu
- [ 11.264402] s5p-mfc 13400000.codec: Linked as a consumer to 13630000.sysmmu
- [ 11.281503] iommu: Adding device 11840000.jpeg-codec to group 2
- [ 11.283628] s5p-jpeg 11840000.jpeg-codec: Linked as a consumer to 11a60000.sysmmu
- [ 11.309892] s5p-jpeg 11840000.jpeg-codec: encoder device registered as /dev/video0
- [ 11.313472] s5p-jpeg 11840000.jpeg-codec: decoder device registered as /dev/video1
- [ 11.329688] s5p-jpeg 11840000.jpeg-codec: Samsung S5P JPEG codec
- [ 11.334498] s5p-mfc 13400000.codec: preallocated 8 MiB buffer for the firmware and context buffers
- [ 11.360002] s5p-mfc 13400000.codec: decoder registered as /dev/video2
- [ 11.361550] s5p-mfc 13400000.codec: encoder registered as /dev/video3
- [ 11.377254] iommu: Adding device 11800000.fimc to group 3
- [ 11.378359] exynos4-fimc 11800000.fimc: Linked as a consumer to 11a20000.sysmmu
- [ 11.395611] iommu: Adding device 11810000.fimc to group 4
- [ 11.397117] exynos4-fimc 11810000.fimc: Linked as a consumer to 11a30000.sysmmu
- [ 11.408428] iommu: Adding device 11820000.fimc to group 5
- [ 11.409568] exynos4-fimc 11820000.fimc: Linked as a consumer to 11a40000.sysmmu
- [ 11.419864] iommu: Adding device 11830000.fimc to group 6
- [ 11.423544] exynos4-fimc 11830000.fimc: Linked as a consumer to 11a50000.sysmmu
- [ 11.441337] s5p-fimc-md soc:camera: Entity type for entity FIMC.0 was not initialized!
- [ 11.464915] s5p-fimc-md: Registered fimc.0.m2m as /dev/video4
- [ 11.465606] s5p-fimc-md: Registered fimc.0.capture as /dev/video5
- [ 11.478699] s5p-fimc-md soc:camera: Entity type for entity FIMC.1 was not initialized!
- [ 11.488241] s5p-fimc-md: Registered fimc.1.m2m as /dev/video6
- [ 11.490441] s5p-fimc-md: Registered fimc.1.capture as /dev/video7
- [ OK ] Started Monitoring of LVM2? dmeventd or progress polling.
- [ 11.966414] __fimc_pipeline_open(): No sensor subdev
- [ 11.966955] __fimc_pipeline_close(): No sensor subdev
- [ 11.984214] __fimc_pipeline_open(): No sensor subdev
- [ 11.984607] __fimc_pipeline_close(): No sensor subdev
- [ 12.764077] smsc95xx 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- [ OK ] Reached target Sound Card.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Network Name Resolution...
- Starting Entropy Harvesting Daemon...
- Starting Network Time Synchronization...
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started Entropy Harvesting Daemon.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Started Network Name Resolution.
- [ OK ] Reached target Host and Network Name Lookups.
- [ OK ] Reached target Network.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Started Daily verification of password and group files.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target Timers.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- [ OK ] Started D-Bus System Message Bus.
- [ OK ] Started OpenSSH Daemon.
- Starting Permit User Sessions...
- Starting Login Service...
- [ OK ] Started Permit User Sessions.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttySAC1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Login Service.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Arch Linux 5.0.0-rc6-u3ml (ttySAC1)
- archl-u3e login: root
- Password:
- Login incorrect
- archl-u3e login: root
- Password:
- Last login: Fri Feb 15 18:53:01 on ttySAC1
- [root@archl-u3e ~]#
- [root@archl-u3e ~]#
- [root@archl-u3e ~]# echo no > /sys/module/printk/parameters/console_suspend
- [root@archl-u3e ~]# rtcwake -d /dev/rtc0 -m mem -s 10
- rtcwake: wakeup from "mem" using /dev/rtc0 at Fri Feb 15 13:27:26 2019
- [ 79.775108] PM: suspend entry (deep)
- [ 79.775462] PM: Syncing filesystems ... done.
- [ 79.819009] Freezing user space processes ... (elapsed 0.004 seconds) done.
- [ 79.826300] OOM killer disabled.
- [ 79.828603] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 79.875967] smsc95xx 1-2:1.0 eth0: entering SUSPEND2 mode
- [ 79.959495] dwc2 12480000.hsotg: suspending usb gadget g_ether
- [ 79.960480] dwc2 12480000.hsotg: dwc2_hsotg_ep_disable: called for ep0
- [ 79.966431] dwc2 12480000.hsotg: new device is full-speed
- [ 79.971805] dwc2 12480000.hsotg: dwc2_hsotg_ep_disable: called for ep0
- [ 79.980568] wake enabled for irq 119
- [ 79.982195] BUCK9: No configuration
- [ 79.985540] BUCK8_P3V3: No configuration
- [ 79.989201] BUCK7_2.0V: No configuration
- [ 79.993175] BUCK6_1.35V: No configuration
- [ 79.997099] VDDQ_CKEM1_2_1.2V: No configuration
- [ 80.002765] BUCK4: regulator suspend disable supported
- [ 80.007115] BUCK3: regulator suspend disable supported
- [ 80.012346] BUCK1: regulator suspend disable supported
- [ 80.016991] LDO26: No configuration
- [ 80.020467] LDO24: No configuration
- [ 80.023991] LDO23: No configuration
- [ 80.027456] LDO19: No configuration
- [ 80.030858] LDO18: No configuration
- [ 80.034388] LDO17: No configuration
- [ 80.038172] LDO16: regulator suspend disable supported
- [ 80.043410] LDO15: regulator suspend disable supported
- [ 80.048429] LDO14: regulator suspend disable supported
- [ 80.053658] LDO12: regulator suspend disable supported
- [ 80.058670] LDO11: regulator suspend disable supported
- [ 80.063522] LDO9: No configuration
- [ 80.067187] LDO7: regulator suspend disable supported
- [ 80.072290] LDO6: regulator suspend disable supported
- [ 80.077321] LDO2: regulator suspend disable supported
- [ 80.081995] VDD_ALIVE_1.0V: No configuration
- [ 80.096885] usb3503 0-0008: switched to STANDBY mode
- [ 80.097568] wake enabled for irq 123
- [ 80.116002] samsung-pinctrl 11000000.pinctrl: Setting external wakeup interrupt mask: 0xfbfff7ff
- [ 80.134695] Disabling non-boot CPUs ...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement