API tools faq
paste
Advertisement
Guest User

Vodafone branded Huawei HG658c - Boot Log

a guest
Mar 27th, 2014
4,822
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.54 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.27 15:25:22 =~=~=~=~=~=~=~=~=~=~=~=
  2. HELO
  3. CPUI
  4. L1CI
  5. HELO
  6. CPUI
  7. L1CI
  8. DRAM
  9. ----
  10. PHYS
  11. STRF
  12. 400H
  13. PHYE
  14. DDR2
  15. SIZ4
  16. SIZ3
  17. SIZ2
  18. DINT
  19. USYN
  20. LSYN
  21. MFAS
  22. LMBE
  23. RACE
  24. PASS
  25. ----
  26. ZBSS
  27. CODE
  28. DATA
  29. L12F
  30. MAIN
  31. NAN1
  32. BT00
  33. 0002
  34. NAN9
  35. BT00
  36. 0234
  37. NAN9
  38. NAN3
  39. RFS1
  40. NAN5
  41.  
  42.  
  43. CFE version 1.0.38-112.70 for BCM963268 (32bit,SP,BE)
  44. Build Date: Tue May 21 11:49:17 CST 2013 (wangzhiquan@X3755-vhg)
  45. Copyright (C) 2000-2011 Broadcom Corporation.
  46.  
  47. NAND flash device: name Spansion S34ML01G, id 0x01f1 block 128KB size 131072KB
  48. Chip ID: BCM63168D0, MIPS: 400MHz, DDR: 400MHz, Bus: 200MHz
  49. Main Thread: TP0
  50. Memory Test Passed
  51. Total Memory: 134217728 bytes (128MB)
  52. Boot Address: 0xb8000000
  53.  
  54. Board IP address : 192.168.1.1:ffffff00
  55. Host IP address : 192.168.1.100
  56. Gateway IP address :
  57. Run from flash/host (f/h) : f
  58. Default host run file name : vmlinux
  59. Default host flash file name : bcm963xx_fs_kernel
  60. Boot delay (0-9 seconds) : 1
  61. Boot image (0=latest, 1=previous) : 0
  62. Board Id (0-0) : 963268_hg658b
  63. Number of MAC Addresses (1-32) : 10
  64. Base MAC Address : 02:10:18:01:00:01
  65. PSI Size (1-64) KBytes : 0
  66. Enable Backup PSI [0|1] : 0
  67. System Log Size (0-256) KBytes : 0
  68. Main Thread Number [0|1] : 0
  69.  
  70.  
  71. Boot :e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
  72. *** Press any key to stop auto run (1 seconds) ***
  73. Auto run second count down: 110
  74. autoRun
  75. Boot from main system!
  76. BOOT FROM MAIN SYSTEM
  77. MAIN IMAGE FOUND
  78. IMAGE CRC CHECK OK
  79. Decompression OK!
  80. Entry at 0x800146c0
  81. Closing network.
  82. Disabling Switch ports.
  83. Flushing Receive Buffers...
  84. 0 buffers found.
  85. Closing DMA Channels.
  86. Starting program at 0x800146c0
  87. Linux version 2.6.30 (wangzhiquan@X3755-vhg) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #10 SMP PREEMPT Wed May 22 16:12:42 CST 2013
  88.  
  89. ======== nand_flash_init =======
  90.  
  91. NAND flash device id 01f1 is not supported.
  92.  
  93.  
  94. Init Flash Error iReturn = -1
  95.  
  96. 63268hg622b prom init
  97.  
  98. CPU revision is: 0002a080 (Broadcom4350)
  99.  
  100. DSL SDRAM reserved: 0x132000
  101.  
  102. Determined physical RAM map:
  103.  
  104. memory: 07ece000 @ 00000000 (usable)
  105.  
  106. Zone PFN ranges:
  107.  
  108. DMA 0x00000000 -> 0x00001000
  109.  
  110. Normal 0x00001000 -> 0x00007ece
  111.  
  112. Movable zone start PFN for each node
  113.  
  114. early_node_map[1] active PFN ranges
  115.  
  116. 0: 0x00000000 -> 0x00007ece
  117.  
  118. On node 0 totalpages: 32462
  119.  
  120. free_area_init_node: node 0, pgdat 804b2690, node_mem_map 81000000
  121.  
  122. DMA zone: 32 pages used for memmap
  123.  
  124. DMA zone: 0 pages reserved
  125.  
  126. DMA zone: 4064 pages, LIFO batch:0
  127.  
  128. Normal zone: 222 pages used for memmap
  129.  
  130. Normal zone: 28144 pages, LIFO batch:7
  131.  
  132. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32208
  133.  
  134. Kernel command line: root=mtd:rootfs ro rootfstype=jffs2 console=ttyS0,115200
  135.  
  136. wait instruction: enabled
  137.  
  138. Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  139.  
  140. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  141.  
  142. NR_IRQS:128
  143.  
  144. PID hash table entries: 512 (order: 9, 2048 bytes)
  145.  
  146. console [ttyS0] enabled
  147.  
  148. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  149.  
  150. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  151.  
  152. Allocating memory for DSP module core and initialization code
  153.  
  154. Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0
  155.  
  156. Memory: 122856k/129848k available (3717k kernel code, 6820k reserved, 1048k data, 168k init, 0k highmem)
  157.  
  158. Calibrating delay loop... 399.36 BogoMIPS (lpj=199680)
  159.  
  160. Mount-cache hash table entries: 512
  161.  
  162. --Kernel Config--
  163.  
  164. SMP=1
  165.  
  166. PREEMPT=1
  167.  
  168. DEBUG_SPINLOCK=0
  169.  
  170. DEBUG_MUTEXES=0
  171.  
  172. Broadcom Logger v0.1 May 16 2013 20:26:41
  173.  
  174. CPU revision is: 0002a080 (Broadcom4350)
  175.  
  176. Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  177.  
  178. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  179.  
  180. Calibrating delay loop... 402.43 BogoMIPS (lpj=201216)
  181.  
  182. Brought up 2 CPUs
  183.  
  184. net_namespace: 1152 bytes
  185.  
  186. bhal: bhalInit entry
  187.  
  188. NET: Registered protocol family 16
  189.  
  190. Internal 1P2 VREG is forced to remain enabled
  191.  
  192. registering PCI controller with io_map_base unset
  193.  
  194. registering PCI controller with io_map_base unset
  195.  
  196. bio: create slab <bio-0> at 0
  197.  
  198. SCSI subsystem initialized
  199.  
  200. usbcore: registered new interface driver usbfs
  201.  
  202. usbcore: registered new interface driver hub
  203.  
  204. usbcore: registered new device driver usb
  205.  
  206. pci 0000:00:00.0: reg 10 32bit mmio: [0x10004000-0x10013fff]
  207.  
  208. pci 0000:00:00.0: reg 30 32bit mmio: [0x000000-0x0007ff]
  209.  
  210. pci 0000:00:00.0: supports D1 D2
  211.  
  212. pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  213.  
  214. pci 0000:00:00.0: PME# disabled
  215.  
  216. pci 0000:00:09.0: reg 10 32bit mmio: [0x10002600-0x100026ff]
  217.  
  218. pci 0000:00:0a.0: reg 10 32bit mmio: [0x10002500-0x100025ff]
  219.  
  220. pci 0000:01:00.0: PME# supported from D0 D3hot
  221.  
  222. pci 0000:01:00.0: PME# disabled
  223.  
  224. pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
  225.  
  226. pci 0000:01:00.0: IO window: disabled
  227.  
  228. pci 0000:01:00.0: MEM window: disabled
  229.  
  230. pci 0000:01:00.0: PREFETCH window: disabled
  231.  
  232. PCI: Setting latency timer of device 0000:01:00.0 to 64
  233.  
  234. BLOG v3.0 Initialized
  235.  
  236. BLOG Rule v1.0 Initialized
  237.  
  238. Broadcom IQoS v0.1 May 16 2013 20:33:38 initialized
  239.  
  240. Broadcom GBPM v0.1 May 16 2013 20:33:39 initialized
  241.  
  242. NET: Registered protocol family 8
  243.  
  244. NET: Registered protocol family 20
  245.  
  246. NET: Registered protocol family 2
  247.  
  248. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  249.  
  250. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  251.  
  252. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  253.  
  254. TCP: Hash tables configured (established 4096 bind 4096)
  255.  
  256. TCP reno registered
  257.  
  258. NET: Registered protocol family 1
  259.  
  260. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  261.  
  262. fuse init (API version 7.11)
  263.  
  264. msgmni has been set to 240
  265.  
  266. io scheduler noop registered (default)
  267.  
  268. PCI: Setting latency timer of device 0000:01:00.0 to 64
  269.  
  270. Driver 'sd' needs updating - please use bus_type methods
  271.  
  272. PPP generic driver version 2.4.2
  273.  
  274. NET: Registered protocol family 24
  275.  
  276. IMQ driver loaded successfully.
  277.  
  278. Hooking IMQ after NAT on PREROUTING.
  279.  
  280. Hooking IMQ before NAT on POSTROUTING.
  281.  
  282. Broadcom DSL NAND controller (BrcmNand Controller)
  283.  
  284. -->brcmnand_scan: CS=0, numchips=1, csi=0
  285.  
  286. mtd->oobsize=0, mtd->eccOobSize=0
  287.  
  288. NAND_CS_NAND_XOR=00000000
  289.  
  290. Disabling XOR on CS#0
  291.  
  292. brcmnand_scan: Calling brcmnand_probe for CS=0
  293.  
  294. B4: NandSelect=40000001, nandConfig=15142200, chipSelect=0
  295.  
  296. brcmnand_read_id: CS0: dev_id=01f1001d
  297.  
  298. After: NandSelect=40000001, nandConfig=15142200
  299.  
  300. Block size=00020000, erase shift=17
  301.  
  302. NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
  303.  
  304. busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
  305.  
  306. timing1 not adjusted: 6574845b
  307.  
  308. timing2 not adjusted: 00001e96
  309.  
  310. brcmnand_adjust_acccontrol: gAccControl[CS=0]=00000000, ACC=f7ff1010
  311.  
  312. BrcmNAND mfg 1 f1 SPANSION_S30ML01GP_08 128MB on CS0
  313.  
  314.  
  315. Found NAND on CS0: ACC=f7ff1010, cfg=15142200, flashId=01f1001d, tim1=6574845b, tim2=00001e96
  316.  
  317. BrcmNAND version = 0x0400 128MB @00000000
  318.  
  319. brcmnand_scan: Done brcmnand_probe
  320.  
  321. brcmnand_scan: B4 nand_select = 40000001
  322.  
  323. brcmnand_scan: After nand_select = 40000001
  324.  
  325. 100 CS=0, chip->ctrl->CS[0]=0
  326.  
  327. ECC level 15, threshold at 1 bits
  328.  
  329. reqEccLevel=0, eccLevel=15
  330.  
  331. 190 eccLevel=15, chip->ecclevel=15, acc=f7ff1010
  332.  
  333. brcmnand_scan 10
  334.  
  335. 200 CS=0, chip->ctrl->CS[0]=0
  336.  
  337. 200 chip->ecclevel=15, acc=f7ff1010
  338.  
  339. page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
  340.  
  341. brcmnand_scan 220
  342.  
  343. Brcm NAND controller version = 4.0 NAND flash size 128MB @18000000
  344.  
  345. brcmnand_scan 230
  346.  
  347. brcmnand_scan 40, mtd->oobsize=64, chip->ecclayout=00000000
  348.  
  349. brcmnand_scan 42, mtd->oobsize=64, chip->ecclevel=15, isMLC=0, chip->cellinfo=0
  350.  
  351. ECC layout=brcmnand_oob_bch4_4k
  352.  
  353. brcmnand_scan: mtd->oobsize=64
  354.  
  355. brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
  356.  
  357. brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
  358.  
  359. 300 CS=0, chip->ctrl->CS[0]=0
  360.  
  361. 500 chip=87a6f190, CS=0, chip->ctrl->CS[0]=0
  362.  
  363. -->brcmnand_default_bbt
  364.  
  365. brcmnand_default_bbt: bbt_td = bbt_main_descr
  366.  
  367. Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0
  368.  
  369. Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0
  370.  
  371. nand_read_bbt: Bad block at 0x011e0000
  372.  
  373. brcmnandCET: Status -> Deferred
  374.  
  375. brcmnand_scan 99
  376.  
  377. Boot from main system!
  378.  
  379. iBlkStart 1
  380.  
  381.  
  382. =======iBlkStart:2=======
  383.  
  384.  
  385. *******iErrCnt:1.
  386.  
  387. Creating 3 MTD partitions on "brcmnand.0":
  388.  
  389. 0x000000040000-0x000001d20000 : "rootfs"
  390.  
  391. 0x000001d20000-0x000003a20000 : "rootfsbak"
  392.  
  393. 0x000003a20000-0x000004620000 : "config"
  394.  
  395. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  396.  
  397. PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
  398.  
  399. PCI: Setting latency timer of device 0000:00:0a.0 to 64
  400.  
  401. ehci_hcd 0000:00:0a.0: EHCI Host Controller
  402.  
  403. ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
  404.  
  405. ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM
  406.  
  407. ehci_hcd 0000:00:0a.0: irq 18, io mem 0x10002500
  408.  
  409. ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00
  410.  
  411. usb usb1: configuration #1 chosen from 1 choice
  412.  
  413. hub 1-0:1.0: USB hub found
  414.  
  415. hub 1-0:1.0: 2 ports detected
  416.  
  417. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  418.  
  419. PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
  420.  
  421. PCI: Setting latency timer of device 0000:00:09.0 to 64
  422.  
  423. ohci_hcd 0000:00:09.0: OHCI Host Controller
  424.  
  425. ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
  426.  
  427. ohci_hcd 0000:00:09.0: irq 17, io mem 0x10002600
  428.  
  429. usb usb2: configuration #1 chosen from 1 choice
  430.  
  431. hub 2-0:1.0: USB hub found
  432.  
  433. hub 2-0:1.0: 2 ports detected
  434.  
  435. usbcore: registered new interface driver usblp
  436.  
  437. Initializing USB Mass Storage driver...
  438.  
  439. usbcore: registered new interface driver usb-storage
  440.  
  441. USB Mass Storage support registered.
  442.  
  443. usbcore: registered new interface driver usbserial
  444.  
  445. USB Serial support registered for generic
  446.  
  447. usbcore: registered new interface driver usbserial_generic
  448.  
  449. usbserial: USB Serial Driver core
  450.  
  451. usbcore: registered new interface driver usbtest
  452.  
  453. MoniterInit entry
  454.  
  455. Serial: BCM63XX driver $Revision: 3.00 $
  456.  
  457. ttyS0 at MMIO 0xb0000180 (irq = 13) is a BCM63XX
  458.  
  459. ttyS1 at MMIO 0xb00001a0 (irq = 42) is a BCM63XX
  460.  
  461. adsl: adsl_init entry
  462.  
  463. bcmxtmcfg: bcmxtmcfg_init entry
  464.  
  465. bcmxtmrt: Broadcom BCM3168D0 ATM/PTM Network Device v0.4 May 21 2013 11:45:48
  466.  
  467. bcmPktDma_init: Broadcom Packet DMA Library initialized
  468.  
  469. Total # RxBds=1448
  470.  
  471. bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
  472.  
  473.  
  474. GACT probability NOT on
  475.  
  476. Mirror/redirect action on
  477.  
  478. u32 classifier
  479.  
  480. input device check on
  481.  
  482. Actions configured
  483.  
  484. Netfilter messages via NETLINK v0.30.
  485.  
  486. nf_conntrack version 0.5.0 (2028 buckets, 8112 max)
  487.  
  488. xt_time: kernel timezone is -0000
  489.  
  490. nf_nat_pt: no ports specified
  491.  
  492. ip_tables: (C) 2000-2006 Netfilter Core Team
  493.  
  494. TCP cubic registered
  495.  
  496. Initializing XFRM netlink socket
  497.  
  498. NET: Registered protocol family 10
  499.  
  500. ip6_tables: (C) 2000-2006 Netfilter Core Team
  501.  
  502. NET: Registered protocol family 17
  503.  
  504. NET: Registered protocol family 15
  505.  
  506. Ebtables v2.0 registered
  507.  
  508. ebt_time registered
  509.  
  510. ebt_ftos registered
  511.  
  512. ebt_wmm_mark registered
  513.  
  514. 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
  515.  
  516. All bugs added by David S. Miller <[email protected]>
  517.  
  518. VFS: Mounted root (jffs2 filesystem) readonly on device 31:0.
  519.  
  520. Freeing unused kernel memory: 168k freed
  521.  
  522.  
  523. =file:drivers/usb/core/hub.c,line:3274,func:hub_events=eventCounts=1=
  524.  
  525.  
  526. init started: BusyBox vv1.9.1 (2013-05-16 20:40:10 CST)
  527.  
  528. starting pid 263, tty '': '/etc/init.d/rcS'
  529. RCS DONE
  530.  
  531. starting pid 265, tty '': '/bin/sh'
  532.  
  533.  
  534. BusyBox vv1.9.1 (2013-05-16 20:40:10 CST) built-in shell (ash)
  535. Enter 'help' for a list of built-in commands.
  536.  
  537. -/bin/sh: usbdiagd: not found
  538. Loading drivers and kernel modules...
  539. bcm_ingqos: module license 'Proprietary' taints kernel.
  540.  
  541. Disabling lock debugging due to kernel taint
  542.  
  543. Broadcom Ingress QoS Module Char Driver v0.1 May 16 2013 20:30:08 Registered<243>
  544.  
  545.  
  546. Broadcom Ingress QoS ver 0.1 initialized
  547.  
  548. BPM: tot_mem_size=134217728B (128MB), buf_mem_size=13421772B (12MB), num of buffers=6403, buf size=2096
  549.  
  550. Broadcom BPM Module Char Driver v0.1 May 16 2013 20:30:07 Registered<244>
  551.  
  552. [NTC bpm] bpm_set_status: BPM status : enabled
  553.  
  554.  
  555. NBUFF v1.0 Initialized
  556.  
  557. Initialized fcache state
  558.  
  559. Broadcom Packet Flow Cache Char Driver v2.2 May 21 2013 11:45:30 Registered<242>
  560.  
  561. Created Proc FS /procfs/fcache
  562.  
  563. Broadcom Packet Flow Cache registered with netdev chain
  564.  
  565. Broadcom Packet Flow Cache learning via BLOG enabled.
  566.  
  567. Constructed Broadcom Packet Flow Cache v2.2 May 21 2013 11:45:30
  568.  
  569. chipId 0x631680D0
  570.  
  571. Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 May 16 2013 20:30:10 Registered <241>
  572.  
  573. FAP Debug values at 0x00000010 0x00000010
  574.  
  575. Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000
  576.  
  577. FAP Soft Reset Done
  578.  
  579. 4ke Reset Done
  580.  
  581. Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000
  582.  
  583. FAP Soft Reset Done
  584.  
  585. 4ke Reset Done
  586.  
  587. Allocated FAP0 GSO Buffers (0xA661D104) : 1048576 bytes @ 0xA6700000
  588.  
  589. Allocated FAP1 GSO Buffers (0xA663D104) : 1048576 bytes @ 0xA6000000
  590.  
  591. [NTC fapProto] fapReset : Reset FAP Protocol layer
  592.  
  593. [FAP0] DSPRAM : stack <0x80000000><1024>, global <0x80000400><7096>, free <72>, total<8192>
  594.  
  595. [FAP1] DSPRAM : stack <0x80000000><1024>, global <0x80000400><7096>, free <72>, total<8192>
  596.  
  597. bcmPktDma_bind: FAP Driver binding successfull
  598.  
  599. [FAP0] PSM : addr<0x80002000>, used <24560>, free <16>, total <24576>
  600.  
  601. [FAP1] PSM : addr<0x80002000>, used <24560>, free <16>, total <24576>
  602.  
  603. [FAP0] Flows supported: 237 (dsp 60, psm 75, qsm 102)
  604.  
  605. [FAP1] Flows supported: 237 (dsp 60, psm 75, qsm 102)
  606.  
  607. [FAP0] DQM : availableMemory 14188 bytes, nextByteAddress 0xE0010894
  608.  
  609. [FAP1] DQM : availableMemory 14188 bytes, nextByteAddress 0xE0010894
  610.  
  611. [FAP0] GSO Buffer set to 0xA6700000
  612.  
  613. [FAP1] GSO Buffer set to 0xA6000000
  614.  
  615. [FAP0] FAP BPM Initialized.
  616.  
  617. [FAP1] FAP BPM Initialized.
  618.  
  619. Broadcom BCM63168D0 Ethernet Network Device v0.1 May 21 2013 11:45:28
  620.  
  621. fapDrv_psmAlloc: fapIdx=0, size: 4000, offset=b08206f0 bytes remaining 7008
  622.  
  623. ETH Init: Ch:0 - 200 tx BDs at 0xb08206f0
  624.  
  625. fapDrv_psmAlloc: fapIdx=1, size: 4000, offset=b0a206f0 bytes remaining 7008
  626.  
  627. ETH Init: Ch:1 - 200 tx BDs at 0xb0a206f0
  628.  
  629. fapDrv_psmAlloc: wastage 8 bytes
  630.  
  631. fapDrv_psmAlloc: fapIdx=0, size: 4808, offset=b0821690 bytes remaining 2192
  632.  
  633. ETH Init: Ch:0 - 600 rx BDs at 0xb0821690
  634.  
  635. fapDrv_psmAlloc: wastage 8 bytes
  636.  
  637. fapDrv_psmAlloc: fapIdx=1, size: 4808, offset=b0a21690 bytes remaining 2192
  638.  
  639. ETH Init: Ch:1 - 600 rx BDs at 0xb0a21690
  640.  
  641. eth0.3: MAC Address: 00:66:4B:32:CE:08
  642.  
  643. eth0.5: MAC Address: 00:66:4B:32:CE:08
  644.  
  645. eth0.4: MAC Address: 00:66:4B:32:CE:08
  646.  
  647. eth0.2: MAC Address: 00:66:4B:32:CE:08
  648.  
  649. nas0: MAC Address: 00:66:4B:32:CE:08
  650.  
  651.  
  652. =file:drivers/usb/core/hub.c,line:3274,func:hub_events=eventCounts=2=
  653.  
  654. --SMP support
  655.  
  656. wl: dsl_tx_pkt_flush_len=338
  657.  
  658. wl: high_wmark_tot=4161
  659.  
  660. PCI: Setting latency timer of device 0000:00:00.0 to 64
  661.  
  662. wl: passivemode=1
  663.  
  664. wl: napimode=0
  665.  
  666. wl0: allocskbmode=1 currallocskbsz=512
  667.  
  668. otp_read_pci: bad crc
  669.  
  670. Neither SPROM nor OTP has valid image
  671.  
  672. wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
  673.  
  674. wl:loading /etc/wlan/bcm6362_vars.bin
  675.  
  676. Failed to open srom image from '/etc/wlan/bcm6362_vars.bin'.
  677.  
  678. wl:loading /etc/wlan/bcm6362_map.bin
  679.  
  680. wl0: Broadcom BCM435f 802.11 Wireless Controller 5.100.138.2001.cpe.L.3
  681.  
  682. Endpoint: endpoint_init entry
  683.  
  684. Endpoint: endpoint_init COMPLETED
  685.  
  686. p8021ag: p8021ag_init entry
  687.  
  688. IRQ 8/BCM WATCHDOG: IRQF_DISABLED is not guaranteed on shared IRQs
  689.  
  690. BCM Hardware Watchdog Timer for BCM96361
  691.  
  692. USB Serial support registered for GSM modem (1-port)
  693.  
  694. usbcore: registered new interface driver option
  695.  
  696. option: v0.7.2:USB Driver for GSM modems
  697.  
  698. Start mic now ...
  699. magic number is 3e 00 84 60.
  700. base64 decrypt failed, try other decrypt
  701. Read from flash ok.
  702. load cfm ok.
  703. start log proc...
  704. ifconfig: SIOCSIFNETMASK: Cannot assign requested address
  705. br0: starting userspace STP failed, starting kernel STP
  706.  
  707. add group failed: Operation not supported
  708. set group 0 mac learning disable in br0 failed: Operation not supported
  709. BcmAdsl_Initialize=0x80232C54, g_pFnNotifyCallback=0x804A61B4
  710.  
  711. lmemhdr[2]=0x100CE000, pAdslLMem[2]=0x100CE000
  712.  
  713. pSdramPHY=0xA7FFFFF8, 0x7DFFFEFF 0xFFBFFFFF
  714.  
  715. *** XfaceOffset: 0x5FF90 => 0x5FF90 ***
  716.  
  717. *** PhySdramSize got adjusted: 0xD9E68 => 0x110570 ***
  718.  
  719. AdslCoreSharedMemInit: shareMemAvailable=137840
  720.  
  721. AdslCoreHwReset: pLocSbSta=862e0000 bkupThreshold=3072
  722.  
  723. AdslCoreHwReset: AdslOemDataAddr = 0xA7F9AC2C
  724.  
  725. fapDrv_psmAlloc: fapIdx=1, size: 1600, offset=b0a22960 bytes remaining 592
  726.  
  727. XTM Init: Ch:0 - 200 rx BDs at 0xb0a22960
  728.  
  729. fapDrv_psmAlloc: fapIdx=1, size: 128, offset=b0a22fa0 bytes remaining 464
  730.  
  731. XTM Init: Ch:1 - 16 rx BDs at 0xb0a22fa0
  732.  
  733. Success
  734. ARL table flush done
  735. Success
  736. atp: cur kernel version:[2.6.30]
  737.  
  738. device eth0.2 entered promiscuous mode
  739.  
  740. device eth0.3 entered promiscuous mode
  741.  
  742. device eth0.4 entered promiscuous mode
  743.  
  744. device eth0.5 entered promiscuous mode
  745.  
  746. ADDRCONF(NETDEV_UP): eth0.2: link is not ready
  747.  
  748. ADDRCONF(NETDEV_UP): eth0.3: link is not ready
  749.  
  750. ADDRCONF(NETDEV_UP): eth0.4: link is not ready
  751.  
  752. ADDRCONF(NETDEV_UP): eth0.5: link is not ready
  753.  
  754. device eth0 is not a slave of br0
  755. arp uses obsolete (PF_INET,SOCK_PACKET)
  756.  
  757. wl: Unsupported
  758. device wl0 entered promiscuous mode
  759.  
  760. br0: topology change detected, propagating
  761.  
  762. br0: port 5(wl0) entering forwarding state
  763.  
  764. acsd: selected channel spec: 0x2b0b
  765. 28800 sec
  766.  
  767. blinktype=5
  768.  
  769. blinktype=4
  770. ADDRCONF(NETDEV_UP): nas0: link is not ready
  771.  
  772.  
  773. ethcmd add wan interface nas0.10 ok
  774. device nas0 entered promiscuous mode
  775.  
  776. Use default bin /var/cwmp now ...
  777. device nas0 left promiscuous mode
  778.  
  779. device nas0 entered promiscuous mode
  780.  
  781. iptables: No chain/target/match by that name
  782. iptables: No chain/target/match by that name
  783. Broadcom Packet Flow Cache flushing the flows
  784.  
  785. Broadcom Packet Flow Cache flushing the flows
  786.  
  787. Broadcom Packet Flow Cache flushing the flows
  788.  
  789. Broadcom Packet Flow Cache flushing the flows
  790.  
  791. Broadcom Packet Flow Cache flushing the flows
  792.  
  793. Broadcom Packet Flow Cache flushing the flows
  794.  
  795. Broadcom Packet Flow Cache flushing the flows
  796.  
  797. Broadcom Packet Flow Cache flushing the flows
  798.  
  799. Broadcom Packet Flow Cache flushing the flows
  800.  
  801. Broadcom Packet Flow Cache flushing the flows
  802.  
  803. Broadcom Packet Flow Cache flushing the flows
  804.  
  805. Broadcom Packet Flow Cache flushing the flows
  806.  
  807. Broadcom Packet Flow Cache flushing the flows
  808.  
  809. Broadcom Packet Flow Cache flushing the flows
  810.  
  811. Broadcom Packet Flow Cache flushing the flows
  812.  
  813. Broadcom Packet Flow Cache flushing the flows
  814.  
  815. Broadcom Packet Flow Cache flushing the flows
  816.  
  817. Broadcom Packet Flow Cache flushing the flows
  818.  
  819. iptables: No chain/target/match by that name
  820. iptables: No chain/target/match by that name
  821. iptables: No chain/target/match by that name
  822. iptables: No chain/target/match by that name
  823. iptables: No chain/target/match by that name
  824. iptables: No chain/target/match by that name
  825. Broadcom Packet Flow Cache flushing the flows
  826.  
  827. FILE:voicecfg.c,LINE:95,sizeof(TAPI)=1388,sizeof(SVC)=57288,sizeof(STATE)=6900
  828. BOS: Enter bosIniBOS: Enter bosInit
  829.  
  830. t
  831. bosTimerInitBOS: Exit bosInit
  832.  
  833.  
  834. Enter bosAppInendpoint_open COMPLETED
  835.  
  836. it Exit bosAppInit BOS: Exit bosInit
  837. Use default bin /var/upnp now ...
  838. Enable Got value: 1
  839. NATEnabled Got value: 1
  840.  
  841. ******* DSP: Found BCM963268 *******
  842.  
  843. ******* DSP: In PCM Mode *******
  844.  
  845. ******* DSP: PCM running in 16 bit mode *******
  846.  
  847. gInterruptCounter = 0xC0E54CF0
  848.  
  849. gInterruptErrors = 0xC0E54CF4
  850.  
  851. gNextRxDesc = 0xC0E54E14
  852.  
  853. gNextTxDesc = 0xC0E54E10
  854.  
  855. gDectTestMode = 0xc0c7e428
  856.  
  857. dectBuffStart = 0xc0c7e434
  858.  
  859. gDectRxOutOfSyncCounter = 0xc0c7e438
  860.  
  861. gDectTxOutOfSyncCounter = 0xc0c7e43c
  862.  
  863. 32 ms ECAN tail-length
  864.  
  865. *** gStartRxDesc[0] = 0xA0C00000
  866.  
  867. *** gBufferSizeBytes = 640
  868.  
  869. *** gStartTxDesc[0] = 0xA0C01000
  870.  
  871. halPcmInit 370 nextTxDesc = 0xA0C01000
  872.  
  873. halPcmInit 370 nextTxDesc = 0xA0C01008
  874.  
  875. halPcmInit 374 Ownership for TX desc not set. Use this buffer.
  876.  
  877. Hausware build date=Mar 12 2012 time=15:23:18
  878.  
  879. boardHalInit completed
  880.  
  881. DSP: Interrupt Masks
  882.  
  883. ---------------
  884.  
  885. IrqMask = 0x00001000
  886.  
  887. IrqMask1 = 0x00000400
  888.  
  889.  
  890. DSP: Interrupt Status
  891.  
  892. -----------------
  893.  
  894. IrqStatus = 0x00000000
  895.  
  896. IrqStatus1 = 0x00000000
  897.  
  898. EndpointInit completed
  899.  
  900. Created message queue "HDSP", depth 99, id 1Endpoint Event task started with pid 1561...
  901.  
  902.  
  903. ioctl minFlash:80,maxFlash:250,offhook:250,onhook:250.
  904.  
  905. [ERROR ept] casCtlIgnoreHookState,1049: (ts: 11s 507ms):char[2] invalid
  906.  
  907. [ERROR ept] casCtlIgnoreHookState,1049: (ts: 11s 552ms):char[3] invalid
  908.  
  909. [ERROR ept] casCtlIgnoreHookState,1049: (ts: 11s 597ms):char[4] invalid
  910.  
  911. [ERROR ept] casCtlIgnoreHookState,1049: (ts: 11s 642ms):char[5] invalid
  912.  
  913.  
  914. rtcpThreadCreate started with PID 1536
  915.  
  916. [rtcpThread][242] pid[1573]
  917.  
  918. --------------v
  919.  
  920. 0xEB: Write Value is......0x04
  921.  
  922. oipsystem bootup0x04 success--------
  923.  
  924. -------
  925. slicLe89116Write: Finished
  926.  
  927.  
  928. 0xEB: Write Value is......0x23
  929.  
  930. 0x23
  931.  
  932. slicLe89116Write: Finished
  933.  
  934. EVENT: endpt 0, event 4, cnxid -1
  935.  
  936. *****DSP TIMESLOT UE0 TEST OK******
  937.  
  938.  
  939. 0xEB: Write Value is......0xC0
  940.  
  941. 0xC0
  942.  
  943. slicLe89116Write: Finished
  944.  
  945.  
  946. 0xEB: Write Value is......0x04
  947.  
  948. 0x04
  949.  
  950. slicLe89116Write: Finished
  951.  
  952.  
  953. 0xEB: Write Value is......0x04
  954.  
  955. 0x04
  956.  
  957. slicLe89116Write: Finished
  958.  
  959.  
  960. 0xEB: Write Value is......0x23
  961.  
  962. 0x23
  963.  
  964. slicLe89116Write: Finished
  965.  
  966. EVENT: endpt 1, event 5, cnxid -1
  967.  
  968. *****DSP TIMESLOT UE1 TEST OK******
  969.  
  970.  
  971. 0xEB: Write Value is......0xC0
  972.  
  973. 0xC0
  974.  
  975. slicLe89116Write: Finished
  976.  
  977.  
  978. 0xEB: Write Value is......0x04
  979.  
  980. 0x04
  981.  
  982. slicLe89116Write: Finished
  983.  
  984.  
  985. [rtcpThread][249] pid[1573]
  986.  
  987. [rtcpThread][272] descSet[0]
  988.  
  989. [rtcpThread][249] pid[1573]
  990.  
  991. [rtcpThread][272] descSet[0]
  992.  
  993. [rtcpThread][249] pid[1573]
  994.  
  995. [rtcpThread][272] descSet[0]
  996.  
  997. [rtcpThread][249] pid[1573]
  998.  
  999. [rtcpThread][272] descSet[0]
  1000.  
  1001. [rtcpThread][249] pid[1573]
  1002.  
  1003. [rtcpThread][272] descSet[0]
  1004.  
  1005. [rtcpThread][249] pid[1573]
  1006.  
  1007. [rtcpThread][272] descSet[0]
  1008.  
  1009. [rtcpThread][249] pid[1573]
  1010.  
  1011. [rtcpThread][272] descSet[0]
  1012.  
  1013. [rtcpThread][249] pid[1573]
  1014.  
  1015. [rtcpThread][272] descSet[0]
  1016.  
  1017. [rtcpThread][249] pid[1573]
  1018.  
  1019. [rtcpThread][272] descSet[0]
  1020.  
  1021. [rtcpThread][249] pid[1573]
  1022.  
  1023. [rtcpThread][272] descSet[0]
  1024.  
  1025. [rtcpThread][249] pid[1573]
  1026.  
  1027. [rtcpThread][272] descSet[0]
  1028.  
  1029. [rtcpThread][249] pid[1573]
  1030.  
  1031. [rtcpThread][272] descSet[0]
  1032.  
  1033. [rtcpThread][249] pid[1573]
  1034.  
  1035. [rtcpThread][272] descSet[0]
  1036.  
  1037. [rtcpThread][249] pid[1573]
  1038.  
  1039. [rtcpThread][272] descSet[0]
  1040.  
  1041. [rtcpThread][249] pid[1573]
  1042.  
  1043. [rtcpThread][272] descSet[0]
  1044.  
  1045. [rtcpThread][249] pid[1573]
  1046.  
  1047. [rtcpThread][272] descSet[0]
  1048.  
  1049. [rtcpThread][249] pid[1573]
  1050.  
  1051. [rtcpThread][272] descSet[0]
  1052.  
  1053. [rtcpThread][249] pid[1573]
  1054.  
  1055. [rtcpThread][272] descSet[0]
  1056.  
  1057. [rtcpThread][249] pid[1573]
  1058.  
  1059. [rtcpThread][272] descSet[0]
  1060.  
  1061. [rtcpThread][249] pid[1573]
  1062.  
  1063. [rtcpThread][272] descSet[0]
  1064.  
  1065. [rtcpThread][249] pid[1573]
  1066.  
  1067. [rtcpThread][272] descSet[0]
  1068.  
  1069. [rtcpThread][249] pid[1573]
  1070.  
  1071. [rtcpThread][272] descSet[0]
  1072. Use default bin /var/upnp now ...
  1073.  
  1074. [rtcpThread][249] pid[1573]
  1075.  
  1076. [rtcpThread][272] descSet[0]
  1077.  
  1078. [rtcpThread][249] pid[1573]
  1079.  
  1080. [rtcpThread][272] descSet[0]
  1081.  
  1082. [rtcpThread][249] pid[1573]
  1083.  
  1084. [rtcpThread][272] descSet[0]
  1085.  
  1086. [rtcpThread][249] pid[1573]
  1087.  
  1088. [rtcpThread][272] descSet[0]
  1089.  
  1090. [rtcpThread][249] pid[1573]
  1091.  
  1092. [rtcpThread][272] descSet[0]
  1093.  
  1094. [rtcpThread][249] pid[1573]
  1095.  
  1096. [rtcpThread][272] descSet[0]
  1097.  
  1098. [rtcpThread][249] pid[1573]
  1099.  
  1100. [rtcpThread][272] descSet[0]
  1101.  
  1102. [rtcpThread][249] pid[1573]
  1103.  
  1104. [rtcpThread][272] descSet[0]
  1105.  
  1106. [rtcpThread][249] pid[1573]
  1107.  
  1108. [rtcpThread][272] descSet[0]
  1109.  
  1110. [rtcpThread][249] pid[1573]
  1111.  
  1112. [rtcpThread][272] descSet[0]
  1113.  
  1114. [rtcpThread][249] pid[1573]
  1115.  
  1116. [rtcpThread][272] descSet[0]
  1117.  
  1118. [rtcpThread][249] pid[1573]
  1119.  
  1120. [rtcpThread][272] descSet[0]
  1121.  
  1122. [rtcpThread][249] pid[1573]
  1123.  
  1124. [rtcpThread][272] descSet[0]
  1125.  
  1126. [rtcpThread][249] pid[1573]
  1127.  
  1128. [rtcpThread][272] descSet[0]
  1129.  
  1130. [rtcpThread][249] pid[1573]
  1131.  
  1132. [rtcpThread][272] descSet[0]
  1133.  
  1134. [rtcpThread][249] pid[1573]
  1135.  
  1136. [rtcpThread][272] descSet[0]
  1137.  
  1138. [rtcpThread][249] pid[1573]
  1139.  
  1140. [rtcpThread][272] descSet[0]
  1141.  
  1142. [rtcpThread][249] pid[1573]
  1143.  
  1144. [rtcpThread][272] descSet[0]
  1145.  
  1146. [rtcpThread][249] pid[1573]
  1147.  
  1148. [rtcpThread][272] descSet[0]
  1149.  
  1150. [rtcpThread][249] pid[1573]
  1151.  
  1152. [rtcpThread][272] descSet[0]
  1153.  
  1154. [rtcpThread][249] pid[1573]
  1155.  
  1156. [rtcpThread][272] descSet[0]
  1157.  
  1158. [rtcpThread][249] pid[1573]
  1159.  
  1160. [rtcpThread][272] descSet[0]
  1161.  
  1162. [rtcpThread][249] pid[1573]
  1163.  
  1164. [rtcpThread][272] descSet[0]
  1165.  
  1166. [rtcpThread][249] pid[1573]
  1167.  
  1168. [rtcpThread][272] descSet[0]
  1169. Use default bin /var/upnp now ...
  1170.  
  1171. [rtcpThread][249] pid[1573]
  1172.  
  1173. [rtcpThread][272] descSet[0]
  1174.  
  1175. [rtcpThread][249] pid[1573]
  1176.  
  1177. [rtcpThread][272] descSet[0]
  1178.  
  1179. [rtcpThread][249] pid[1573]
  1180.  
  1181. [rtcpThread][272] descSet[0]
  1182.  
  1183. [rtcpThread][249] pid[1573]
  1184.  
  1185. [rtcpThread][272] descSet[0]
  1186.  
  1187. [rtcpThread][249] pid[1573]
  1188.  
  1189. [rtcpThread][272] descSet[0]
  1190.  
  1191. [rtcpThread][249] pid[1573]
  1192.  
  1193. [rtcpThread][272] descSet[0]
  1194.  
  1195. [rtcpThread][249] pid[1573]
  1196.  
  1197. [rtcpThread][272] descSet[0]
  1198.  
  1199. [rtcpThread][249] pid[1573]
  1200.  
  1201. [rtcpThread][272] descSet[0]
  1202.  
  1203. [rtcpThread][249] pid[1573]
  1204.  
  1205. [rtcpThread][272] descSet[0]
  1206.  
  1207. [rtcpThread][249] pid[1573]
  1208.  
  1209. [rtcpThread][272] descSet[0]
  1210.  
  1211. [rtcpThread][249] pid[1573]
  1212.  
  1213. [rtcpThread][272] descSet[0]
  1214.  
  1215. [rtcpThread][249] pid[1573]
  1216.  
  1217. [rtcpThread][272] descSet[0]
  1218.  
  1219. [rtcpThread][249] pid[1573]
  1220.  
  1221. [rtcpThread][272] descSet[0]
  1222.  
  1223. [rtcpThread][249] pid[1573]
  1224.  
  1225. [rtcpThread][272] descSet[0]
  1226.  
  1227. [rtcpThread][249] pid[1573]
  1228.  
  1229. [rtcpThread][272] descSet[0]
  1230.  
  1231. [rtcpThread][249] pid[1573]
  1232.  
  1233. [rtcpThread][272] descSet[0]
  1234.  
  1235. [rtcpThread][249] pid[1573]
  1236.  
  1237. [rtcpThread][272] descSet[0]
  1238.  
  1239. [rtcpThread][249] pid[1573]
  1240.  
  1241. [rtcpThread][272] descSet[0]
  1242.  
  1243. [rtcpThread][249] pid[1573]
  1244.  
  1245. [rtcpThread][272] descSet[0]
  1246.  
  1247. [rtcpThread][249] pid[1573]
  1248.  
  1249. [rtcpThread][272] descSet[0]
  1250.  
  1251. [rtcpThread][249] pid[1573]
  1252.  
  1253. [rtcpThread][272] descSet[0]
  1254.  
  1255. [rtcpThread][249] pid[1573]
  1256.  
  1257. [rtcpThread][272] descSet[0]
  1258.  
  1259. [rtcpThread][249] pid[1573]
  1260.  
  1261. [rtcpThread][272] descSet[0]
  1262.  
  1263. [rtcpThread][249] pid[1573]
  1264.  
  1265. [rtcpThread][272] descSet[0]
  1266. Use default bin /var/upnp now ...
  1267.  
  1268. [rtcpThread][249] pid[1573]
  1269.  
  1270. [rtcpThread][272] descSet[0]
  1271.  
  1272. [rtcpThread][249] pid[1573]
  1273.  
  1274. [rtcpThread][272] descSet[0]
  1275.  
  1276. [rtcpThread][249] pid[1573]
  1277.  
  1278. [rtcpThread][272] descSet[0]
  1279.  
  1280. [rtcpThread][249] pid[1573]
  1281.  
  1282. [rtcpThread][272] descSet[0]
  1283.  
  1284. [rtcpThread][249] pid[1573]
  1285.  
  1286. [rtcpThread][272] descSet[0]
  1287.  
  1288. [rtcpThread][249] pid[1573]
  1289.  
  1290. [rtcpThread][272] descSet[0]
  1291.  
  1292. [rtcpThread][249] pid[1573]
  1293.  
  1294. [rtcpThread][272] descSet[0]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!