Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.40-unRAID] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD80EZAZ-11TDBA0
- Serial Number: 7SH3WXSD
- LU WWN Device Id: 5 000cca 252cfdd74
- Firmware Version: 83.H0A83
- User Capacity: 8,001,563,222,016 bytes [8.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 3.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun Jul 8 18:21:35 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 248) Self-test routine in progress...
- 80% of test remaining.
- Total time to complete Offline
- data collection: ( 93) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1152) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
- 2 Throughput_Performance --S--- 127 127 054 - 120
- 3 Spin_Up_Time POS--- 100 100 024 - 0
- 4 Start_Stop_Count -O--C- 100 100 000 - 6
- 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
- 7 Seek_Error_Rate -O-R-- 100 100 067 - 0
- 8 Seek_Time_Performance --S--- 128 128 020 - 18
- 9 Power_On_Hours -O--C- 100 100 000 - 67
- 10 Spin_Retry_Count -O--C- 100 100 060 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 6
- 22 Unknown_Attribute PO---K 100 100 025 - 100
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 8
- 193 Load_Cycle_Count -O--C- 100 100 000 - 8
- 194 Temperature_Celsius -O---- 180 180 000 - 36 (Min/Max 25/38)
- 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
- 197 Current_Pending_Sector -O---K 100 100 000 - 0
- 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 1 Comprehensive SMART error log
- 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
- 0x04 GPL R/O 256 Device Statistics log
- 0x04 SL R/O 255 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x0c GPL R/O 5501 Pending Defects log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x12 GPL R/O 1 SATA NCQ Non-Data log
- 0x13 GPL R/O 1 SATA NCQ Send and Receive log
- 0x15 GPL,SL R/W 1 Rebuild Assist log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x24 GPL R/O 256 Current Device Internal Status Data log
- 0x25 GPL R/O 256 Saved Device Internal Status Data log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 65 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 256 (0x0100)
- SCT Support Level: 0
- Device State: DST executing in background (3)
- Current Temperature: 36 Celsius
- Power Cycle Min/Max Temperature: 25/36 Celsius
- Lifetime Min/Max Temperature: 25/38 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/65 Celsius
- Min/Max Temperature Limit: -40/70 Celsius
- Temperature History Size (Index): 128 (99)
- Index Estimated Time Temperature Celsius
- 100 2018-07-08 16:14 35 ****************
- ... ..( 22 skipped). .. ****************
- 123 2018-07-08 16:37 35 ****************
- 124 2018-07-08 16:38 25 ******
- 125 2018-07-08 16:39 26 *******
- 126 2018-07-08 16:40 26 *******
- 127 2018-07-08 16:41 26 *******
- 0 2018-07-08 16:42 27 ********
- 1 2018-07-08 16:43 27 ********
- 2 2018-07-08 16:44 28 *********
- 3 2018-07-08 16:45 28 *********
- 4 2018-07-08 16:46 28 *********
- 5 2018-07-08 16:47 29 **********
- 6 2018-07-08 16:48 29 **********
- 7 2018-07-08 16:49 29 **********
- 8 2018-07-08 16:50 30 ***********
- 9 2018-07-08 16:51 30 ***********
- 10 2018-07-08 16:52 30 ***********
- 11 2018-07-08 16:53 31 ************
- 12 2018-07-08 16:54 31 ************
- 13 2018-07-08 16:55 31 ************
- 14 2018-07-08 16:56 32 *************
- ... ..( 4 skipped). .. *************
- 19 2018-07-08 17:01 32 *************
- 20 2018-07-08 17:02 33 **************
- ... ..( 4 skipped). .. **************
- 25 2018-07-08 17:07 33 **************
- 26 2018-07-08 17:08 34 ***************
- ... ..( 9 skipped). .. ***************
- 36 2018-07-08 17:18 34 ***************
- 37 2018-07-08 17:19 35 ****************
- ... ..( 22 skipped). .. ****************
- 60 2018-07-08 17:42 35 ****************
- 61 2018-07-08 17:43 36 *****************
- ... ..( 36 skipped). .. *****************
- 98 2018-07-08 18:20 36 *****************
- 99 2018-07-08 18:21 35 ****************
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) supported [please try: '-l defects']
- SATA Phy Event Counters (GP Log 0x11
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FISHh
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement