Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-25-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.12
- Device Model: ST31000528AS
- Serial Number: 9VP256N8
- LU WWN Device Id: 5 000c50 019a4ecfd
- Firmware Version: CC49
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Sat Jan 18 16:48:20 2020 GMT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 600) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 178) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 111 096 006 Pre-fail Always - 39937233
- 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6614
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 50061109
- 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21144
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1810
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 228
- 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 786444
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 072 045 045 Old_age Always In_the_past 28 (Min/Max 19/43)
- 194 Temperature_Celsius 0x0022 028 055 000 Old_age Always - 28 (0 11 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 023 013 000 Old_age Always - 39937233
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 23976 (130 183 0)
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3801563088
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2579921719
- SMART Error Log Version: 1
- ATA Error Count: 222 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 222 occurred at disk power-on lifetime: 2830 hours (117 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 07:53:32.212 READ DMA EXT
- 25 00 80 ff ff ff ef 00 07:53:32.128 READ DMA EXT
- 25 00 00 ff ff ff ef 00 07:53:29.109 READ DMA EXT
- 25 00 00 ff ff ff ef 00 07:53:29.023 READ DMA EXT
- 25 00 48 ff ff ff ef 00 07:53:29.023 READ DMA EXT
- Error 221 occurred at disk power-on lifetime: 2830 hours (117 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 07:53:29.109 READ DMA EXT
- 25 00 00 ff ff ff ef 00 07:53:29.023 READ DMA EXT
- 25 00 48 ff ff ff ef 00 07:53:29.023 READ DMA EXT
- 25 00 00 ff ff ff ef 00 07:53:25.996 READ DMA EXT
- 25 00 08 ff ff ff ef 00 07:53:25.995 READ DMA EXT
- Error 220 occurred at disk power-on lifetime: 2830 hours (117 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 07:53:25.996 READ DMA EXT
- 25 00 08 ff ff ff ef 00 07:53:25.995 READ DMA EXT
- 35 00 08 ff ff ff ef 00 07:53:25.995 WRITE DMA EXT
- 42 00 08 ff ff ff ef 00 07:53:25.960 READ VERIFY SECTOR(S) EXT
- 25 00 08 ff ff ff ef 00 07:53:22.845 READ DMA EXT
- Error 219 occurred at disk power-on lifetime: 2830 hours (117 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 ff ff ff ef 00 07:53:22.845 READ DMA EXT
- 25 00 00 ff ff ff ef 00 07:53:19.815 READ DMA EXT
- 25 00 08 ff ff ff ef 00 07:53:19.722 READ DMA EXT
- 25 00 00 ff ff ff ef 00 07:53:16.677 READ DMA EXT
- 25 00 08 ff ff ff ef 00 07:53:16.634 READ DMA EXT
- Error 218 occurred at disk power-on lifetime: 2830 hours (117 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 07:53:16.677 READ DMA EXT
- 25 00 08 ff ff ff ef 00 07:53:16.634 READ DMA EXT
- 25 00 00 ff ff ff ef 00 07:53:13.596 READ DMA EXT
- 25 00 08 ff ff ff ef 00 07:53:13.553 READ DMA EXT
- 25 00 00 ff ff ff ef 00 07:53:10.499 READ DMA EXT
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement