API tools faq
paste
Advertisement
VecH

TP-Link TL-WA850REv2 - kernel.log

VecH
Mar 6th, 2019
516
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.89 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.9.152 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7627-753531d) ) #0 Mon Jan 28 08:54:32 2019
  2. [ 0.000000] MyLoader: sysp=475cb8ae, boardp=ad96be9c, parts=42c33709
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  5. [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
  17. [ 0.000000] On node 0 totalpages: 8192
  18. [ 0.000000] free_area_init_node: node 0, pgdat 8043e894, node_mem_map 81000020
  19. [ 0.000000] Normal zone: 64 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  25. [ 0.000000] Kernel command line: board=TL-WA850RE-V2 mtdparts=spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware) console=ttyS0,115200 rootfstype=squashfs noinitrd
  26. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  29. [ 0.000000] Writing ErrCtl register=00000000
  30. [ 0.000000] Readback ErrCtl register=00000000
  31. [ 0.000000] Memory: 27604K/32768K available (3383K kernel code, 156K rwdata, 424K rodata, 252K init, 211K bss, 5164K reserved, 0K cma-reserved)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:51
  34. [ 0.000000] Clocks: CPU:550.000MHz, DDR:395.288MHz, AHB:197.644MHz, Ref:25.000MHz
  35. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6950037990 ns
  36. [ 0.000010] sched_clock: 32 bits at 275MHz, resolution 3ns, wraps every 7809031678ns
  37. [ 0.008276] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912)
  38. [ 0.071079] pid_max: default: 32768 minimum: 301
  39. [ 0.076076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. [ 0.083064] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.093881] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  42. [ 0.104300] futex hash table entries: 256 (order: -1, 3072 bytes)
  43. [ 0.112239] NET: Registered protocol family 16
  44. [ 0.118776] MIPS: machine is TP-LINK TL-WA850RE v2
  45. [ 0.359729] Can't analyze schedule() prologue at 803aa574
  46. [ 0.381058] clocksource: Switched to clocksource MIPS
  47. [ 0.387683] NET: Registered protocol family 2
  48. [ 0.393398] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  49. [ 0.400770] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  50. [ 0.407550] TCP: Hash tables configured (established 1024 bind 1024)
  51. [ 0.414395] UDP hash table entries: 256 (order: 0, 4096 bytes)
  52. [ 0.420575] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  53. [ 0.427534] NET: Registered protocol family 1
  54. [ 0.432211] PCI: CLS 0 bytes, default 32
  55. [ 0.436480] Crashlog allocated RAM at address 0x1f00000
  56. [ 0.443459] workingset: timestamp_bits=30 max_order=13 bucket_order=0
  57. [ 0.458304] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  58. [ 0.464512] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  59. [ 0.485784] io scheduler noop registered
  60. [ 0.489927] io scheduler deadline registered (default)
  61. [ 0.495894] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  62. [ 0.505746] console [ttyS0] disabled
  63. [ 0.529699] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  64. [ 0.538814] console [ttyS0] enabled
  65. [ 0.546372] bootconsole [early0] disabled
  66. [ 0.562233] m25p80 spi0.0: found gd25q32, expected m25p80
  67. [ 0.570229] m25p80 spi0.0: gd25q32 (4096 Kbytes)
  68. [ 0.575116] 6 cmdlinepart partitions found on MTD device spi0.0
  69. [ 0.581252] Creating 6 MTD partitions on "spi0.0":
  70. [ 0.586206] 0x000000000000-0x000000020000 : "u-boot"
  71. [ 0.593659] 0x000000020000-0x000000170000 : "kernel"
  72. [ 0.601247] 0x000000170000-0x0000003b0000 : "rootfs"
  73. [ 0.608263] mtd: device 2 (rootfs) set to be root filesystem
  74. [ 0.614260] 1 squashfs-split partitions found on MTD device rootfs
  75. [ 0.620659] 0x0000003a0000-0x0000003b0000 : "rootfs_data"
  76. [ 0.628835] 0x0000003b0000-0x0000003f0000 : "config"
  77. [ 0.636479] 0x0000003f0000-0x000000400000 : "art"
  78. [ 0.643849] 0x000000020000-0x0000003b0000 : "firmware"
  79. [ 0.652885] libphy: Fixed MDIO Bus: probed
  80. [ 0.683077] libphy: ag71xx_mdio: probed
  81. [ 1.314047] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
  82. [ 1.324324] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  83. [ 1.333176] NET: Registered protocol family 10
  84. [ 1.342850] NET: Registered protocol family 17
  85. [ 1.347503] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  86. [ 1.361101] 8021q: 802.1Q VLAN Support v1.8
  87. [ 1.367359] hctosys: unable to open rtc device (rtc0)
  88. [ 1.378512] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  89. [ 1.387594] Freeing unused kernel memory: 252K
  90. [ 1.392229] This architecture does not have kernel memory protection.
  91. [ 2.171771] init: Console is alive
  92. [ 2.175574] init: - watchdog -
  93. [ 2.491110] random: fast init done
  94. [ 3.136591] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  95. [ 3.196813] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  96. [ 3.215264] init: - preinit -
  97. [ 3.991216] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  98. [ 4.024387] random: procd: uninitialized urandom read (4 bytes read)
  99. [ 6.094646] eth0: link up (100Mbps/Full duplex)
  100. [ 6.101603] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  101. [ 7.298178] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  102. [ 7.334406] urandom-seed: Seed file not found (/etc/urandom.seed)
  103. [ 7.531416] eth0: link down
  104. [ 7.548688] procd: - early -
  105. [ 7.551980] procd: - watchdog -
  106. [ 8.195677] procd: - watchdog -
  107. [ 8.199265] procd: - ubus -
  108. [ 8.321495] random: ubusd: uninitialized urandom read (4 bytes read)
  109. [ 8.379587] random: ubusd: uninitialized urandom read (4 bytes read)
  110. [ 8.386767] random: ubusd: uninitialized urandom read (4 bytes read)
  111. [ 8.394457] procd: - init -
  112. [ 8.753196] kmodloader: loading kernel modules from /etc/modules.d/*
  113. [ 8.764891] ip6_tables: (C) 2000-2006 Netfilter Core Team
  114. [ 8.783687] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
  115. [ 8.792046] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
  116. [ 8.802556] ip_tables: (C) 2000-2006 Netfilter Core Team
  117. [ 8.817819] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  118. [ 8.886692] xt_time: kernel timezone is -0000
  119. [ 8.956690] PPP generic driver version 2.4.2
  120. [ 8.964095] NET: Registered protocol family 24
  121. [ 9.017597] ath: EEPROM regdomain: 0x0
  122. [ 9.017610] ath: EEPROM indicates default country code should be used
  123. [ 9.017614] ath: doing EEPROM country->regdmn map search
  124. [ 9.017633] ath: country maps to regdmn code: 0x3a
  125. [ 9.017639] ath: Country alpha2 being used: US
  126. [ 9.017643] ath: Regpair used: 0x3a
  127. [ 9.029183] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  128. [ 9.034304] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
  129. [ 9.073594] kmodloader: done loading kernel modules from /etc/modules.d/*
  130. [ 10.532772] urandom_read: 5 callbacks suppressed
  131. [ 10.532782] random: jshn: uninitialized urandom read (4 bytes read)
  132. [ 26.014789] jffs2: Too few erase blocks (1)
  133. [ 26.416424] br-lan: port 1(eth0) entered blocking state
  134. [ 26.421920] br-lan: port 1(eth0) entered disabled state
  135. [ 26.427756] device eth0 entered promiscuous mode
  136. [ 26.487936] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  137. [ 28.494715] eth0: link up (100Mbps/Full duplex)
  138. [ 28.499477] br-lan: port 1(eth0) entered blocking state
  139. [ 28.504944] br-lan: port 1(eth0) entered forwarding state
  140. [ 28.681173] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  141. [ 84.681128] random: crng init done
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!