API tools faq
paste
hardik1

read only flag with mtdparts

hardik1
May 15th, 2017
138
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.73 KB | None | 0 0
raw download clone embed print report
  1. �RK310B�DDR Version 1.04 20140217
  2. In
  3. DDR3
  4. 300MHz
  5. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  6. Memory OK
  7. OUT
  8. BUILD==2.18 2
  9. No.1 FLASH ID:f7 ff ff ff ff ff
  10. No.2 FLASH ID:40 ff ff ff ff ff
  11. No.3 FLASH ID:d7 ff ff ff ff ff
  12. SdmmcInit=2 0
  13. FwPartOffset=2000 , 400
  14. OK! 106175
  15. unsigned!
  16. SecureBootEn = 0 0
  17. Boot ver: 2014-10-29#2.19
  18. start_linux=====117119
  19. 770186 Starting kernel...@0x60408000
  20.  
  21. Initializing cgroup subsys cpu
  22. Linux version 3.0.36+ (hardik@ub) (gcc version 4.7.4 (Ubuntu/Linaro 4.7.4-3ubuntu12) ) #63 SMP PREEMPT Mon May 15 16:15:15 IST 2017
  23. CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  24. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  25. Machine: RK30board
  26. ddr size = 1024 M, set ion_reserve_size size to 125829120
  27. memory reserve: Memory(base:0x98800000 size:120M) reserved for <ion>
  28. memory reserve: Memory(base:0x97000000 size:24M) reserved for <fb0 buf>
  29. memory reserve: Total reserved 144M
  30. Memory policy: ECC disabled, Data cache writeback
  31. bootconsole [earlycon0] enabled
  32. CPU SRAM: copied sram code from c0976000 to fef00100 - fef020d0
  33. CPU SRAM: copied sram data from c0977fd0 to fef020d0 - fef02848
  34. sram_log: @ 0q @ P 1 / ! aB@ 2 `" 2q : 4q
  35. CLKDATA_MSG: pll_flag = 0x03
  36. cpll auto set rate error
  37. hzb test rmii clk get form clkin
  38. CLKDATA_ERR: can't get a available nume and deno
  39. CLKDATA_ERR: clk_frac_div can't get rate=48000000,uart0_frac_div
  40. L310 cache controller enabled
  41. l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  42. DDR DEBUG: version 1.00 20131106
  43. DDR DEBUG: DDR3 Device
  44. DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  45. DDR DEBUG: init success!!! freq=300MHz
  46. DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x3, DGSL=1 extra clock, DGPS=90
  47. DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x3, DGSL=1 extra clock, DGPS=90
  48. DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  49. DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
  50. DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  51. DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  52. DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  53. PERCPU: Embedded 7 pages/cpu @c1aa7000 s6976 r8192 d13504 u32768
  54. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 223232
  55. Kernel command line: earlyprintk=ttyFIQ0,115200n8 console=ttyFIQ0 init=/sbin/init initrd=0x62000000,0x002C0000 root=/dev/mmcblk0p5 rw rootwait2
  56. PID hash table entries: 2048 (order: 1, 8192 bytes)
  57. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  58. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  59. allocated 4194304 bytes of page_cgroup
  60. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  61. Memory: 880MB = 880MB total
  62. Memory: 873300k/873300k available, 175276k reserved, 401408K highmem
  63. Virtual kernel memory layout:
  64. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  65. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  66. DMA : 0xff600000 - 0xffe00000 ( 8 MB)
  67. vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB)
  68. lowmem : 0xc0000000 - 0xde800000 ( 488 MB)
  69. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  70. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  71. .init : 0xc0408000 - 0xc042e000 ( 152 kB)
  72. .text : 0xc042e000 - 0xc0922ee0 (5076 kB)
  73. .data : 0xc0924000 - 0xc09752a0 ( 325 kB)
  74. .bss : 0xc0979024 - 0xc129d078 (9361 kB)
  75. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  76. Preemptible hierarchical RCU implementation.
  77. NR_IRQS:352
  78. rk30_gpio_init: 128 gpio irqs in 4 banks
  79. sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  80. rk_timer: version 1.3
  81. Console: colour dummy device 80x30
  82. Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  83. pid_max: default: 32768 minimum: 301
  84. Mount-cache hash table entries: 512
  85. Initializing cgroup subsys debug
  86. Initializing cgroup subsys cpuacct
  87. Initializing cgroup subsys memory
  88. Initializing cgroup subsys freezer
  89. CPU: Testing write buffer coherency: ok
  90. CPU1: Booted secondary processor
  91. CPU2: Booted secondary processor
  92. CPU3: Booted secondary processor
  93. Brought up 4 CPUs
  94. SMP: Total of 4 processors activated (6525.87 BogoMIPS).
  95. devtmpfs: initialized
  96. NET: Registered protocol family 16
  97. lcdc0 is used as primary display device contoller!
  98. warning:lcdc1 not add to system!
  99. rk29sdk_wifi_bt_gpio_control_init: request wifi power gpio failed
  100. <hit enter to activate fiq debugger>
  101. onsole [ttyFIQ0] enabled, bootconsole disabled
  102. console [ttyFIQ0] enabled, bootconsole disabled
  103. Registered FIQ tty driver de0adc00
  104. Loaded driver for PL330 DMAC-1 rk29-pl330
  105. DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  106. Loaded driver for PL330 DMAC-2 rk29-pl330
  107. DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  108. rk29xx_spim: driver initialized, fifo_len=32,bus_num=0
  109. rk29xx_spim: driver initialized, fifo_len=32,bus_num=1
  110. bio: create slab <bio-0> at 0
  111. SCSI subsystem initialized
  112. rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
  113. rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
  114. rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  115. rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
  116. rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
  117. rk fb probe ok!
  118. cfg80211: Calling CRDA to update world regulatory domain
  119. act8846_set_init,line=17
  120. act8846_set_init:g_pmic_type=3
  121. act8846_set_init act_dcdc1 =1200000mV end
  122. act8846_set_init vdd_core =1000000mV end
  123. act8846_set_init vdd_cpu =1000000mV end
  124. act8846_set_init act_dcdc4 =3000000mV end
  125. act8846_set_init act_ldo1 =1000000mV end
  126. act8846_set_init act_ldo2 =1200000mV end
  127. act8846_set_init act_ldo3 =1800000mV end
  128. act8846_set_init act_ldo4 =3300000mV end
  129. act8846_set_init act_ldo5 =3300000mV end
  130. act8846_set_init act_ldo6 =3300000mV end
  131. act8846_set_init act_ldo7 =1800000mV end
  132. act8846_set_init act_ldo8 =2800000mV end
  133. act8846_set_init,line=78 END
  134. i2c-core: driver [act8846] using legacy suspend method
  135. i2c-core: driver [act8846] using legacy resume method
  136. Switching to clocksource rk_timer
  137. Switched to NOHz mode on CPU #0
  138. Switched to NOHz mode on CPU #2
  139. Switched to NOHz mode on CPU #3
  140. Switched to NOHz mode on CPU #1
  141. lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf034000
  142. fb0:win0
  143. fb1:win1
  144. fb2:win2
  145. rk3188 lcdc0 clk enable...
  146. rk3188 lcdc0 clk disable...
  147. fb0:phy:97000000>>vir:e0000000>>len:0x1800000
  148. rk_fb_register>>>>>fb0
  149. rk_fb_register>>>>>fb1
  150. rk3188 lcdc0 probe ok!
  151. emmc emmc: MMC controller initialized, bus_hz: 74250000Hz
  152. NET: Registered protocol family 2
  153. IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  154. TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  155. TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  156. TCP: Hash tables configured (established 65536 bind 65536)
  157. TCP reno registered
  158. UDP hash table entries: 256 (order: 1, 8192 bytes)
  159. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  160. NET: Registered protocol family 1
  161. RK29 Backlight Driver Initialized.
  162. PMU: registered new PMU device of type 0
  163. efuse_version_val: efuse version = 51
  164. DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 8000
  165. efuse_version_val: efuse version = 51
  166. DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 8000
  167. cpufreq: delete arm freq(1608000)
  168. rk3188 cpufreq version 2.2, suspend freq 816 MHz
  169. VPU_SERVICE: failed on clk_get pd_video
  170. VPU_SERVICE: failed on clk_get aclk_ddr_vepu
  171. VPU_SERVICE: failed on clk_get hclk_cpu_vcodec
  172. vpu: power on
  173. VPU_SERVICE: checking hw id 4831
  174. vpu: power off...done
  175. VPU_SERVICE: init success
  176. audit: initializing netlink socket (disabled)
  177. type=2000 audit(0.500:1): initialized
  178. highmem bounce pool size: 64 pages
  179. ashmem: initialized
  180. fuse init (API version 7.16)
  181. msgmni has been set to 921
  182. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  183. io scheduler noop registered
  184. io scheduler deadline registered
  185. io scheduler cfq registered (default)
  186. Rockchip ion module(version: 1.0) is successfully loaded
  187. loop: module loaded
  188. Read the Ethernet MAC address from IDB:00:16:00:00:00:42
  189. eth_mac_from_idb***********:0:16:0:0:0:42
  190. rk29 vmac rk29 vmac.0: ARC VMAC at 0x10204000 irq 51 00:16:00:00:00:42
  191. enter rk30_rmii_io_init
  192. PPP generic driver version 2.4.2
  193. PPP Deflate Compression module registered
  194. PPP BSD Compression module registered
  195. PPP MPPE Compression module registered
  196. NET: Registered protocol family 24
  197. tun: Universal TUN/TAP device driver, 1.6
  198. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  199. Rockchip WiFi SYS interface (V1.00) ...
  200. rk29-keypad: probe of rk29-keypad failed with error -22
  201. using rtc device, rtc_hym8563, for alarms
  202. rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
  203. i2c /dev entries driver
  204. Linux video capture interface: v2.00
  205. device-mapper: uevent: version 1.0.3
  206. device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  207. cpuidle: using governor ladder
  208. cpuidle: using governor menu
  209. .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sd_mmc]
  210. .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sdio]
  211. zram: Created 1 device(s) ...
  212. GACT probability NOT on
  213. Mirror/redirect action on
  214. u32 classifier
  215. Actions configured
  216. Netfilter messages via NETLINK v0.30.
  217. nf_conntrack version 0.5.0 (13645 buckets, 54580 max)
  218. ctnetlink v0.93: registering with nfnetlink.
  219. NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  220. NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  221. xt_time: kernel timezone is -0000
  222. ip_tables: (C) 2000-2006 Netfilter Core Team
  223. arp_tables: (C) 2002 David S. Miller
  224. TCP cubic registered
  225. Initializing XFRM netlink socket
  226. NET: Registered protocol family 10
  227. Mobile IPv6
  228. ip6_tables: (C) 2000-2006 Netfilter Core Team
  229. IPv6 over IPv4 tunneling driver
  230. NET: Registered protocol family 17
  231. NET: Registered protocol family 15
  232. NET: Registered protocol family 35
  233. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  234. Registering SWP/SWPB emulation handler
  235. mmc0: BKOPS_EN bit is not set
  236. emmc emmc: bus width: 8 bit, clock: 37125000Hz
  237. mmc0: new high speed DDR MMC card at address 0001
  238. mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
  239. uboot: 0x000400000 -- 0x000800000 (4 MB)
  240. mmcblk0: p1
  241.  
  242. drivers/mmc/core/core.c...2019.. ===== mmc_rescan Begin....[mmc1]
  243.  
  244. =================
  245. sdmmc_rescan..2026.. ====find no SDMMC host. [mmc1]
  246.  
  247. drivers/mmc/core/core.c...2019.. ===== mmc_rescan Begin....[mmc2]
  248. rk29_sdmmc_change_clk_div..1684.. newDiv=42, newCLK=294Khz [sdio]
  249. ddrfreq: verion 3.2 20131126
  250. ddrfreq: fix cpu pause bug
  251. ddrfreq: normal 396MHz video 300MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 198MHz reboot 300MHz
  252. ddrfreq: change freq to 445 MHz when normal
  253. rtc_hym8563 1-0051: setting system clock to 2017-05-15 16:20:39 UTC (1494865239)
  254. VFS: Cannot open root device "mmcblk0p5" or unknown-block(179,5)
  255. Please append a correct "root=" boot option; here are the available partitions:
  256. b300 3817472 mmcblk0 driver: mmcblk
  257. b301 4096 mmcblk0p1 00000000-0000-0000-0000-000000000000
  258. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,5)
  259. [<c043945c>] (unwind_backtrace+0x0/0xf8) from [<c07e995c>] (panic+0x74/0x198)
  260. [<c07e995c>] (panic+0x74/0x198) from [<c0408c7c>] (mount_block_root+0x1cc/0x28c)
  261. [<c0408c7c>] (mount_block_root+0x1cc/0x28c) from [<c0408ec4>] (prepare_namespace+0x124/0x188)
  262. [<c0408ec4>] (prepare_namespace+0x124/0x188) from [<c0408974>] (kernel_init+0x108/0x13c)
  263. [<c0408974>] (kernel_init+0x108/0x13c) from [<c0434af4>] (kernel_thread_exit+0x0/0x8)
  264. CPU1: stopping
  265. [<c043945c>] (unwind_backtrace+0x0/0xf8) from [<c042e44c>] (do_IPI+0x188/0x1bc)
  266. [<c042e44c>] (do_IPI+0x188/0x1bc) from [<c0433bc8>] (__irq_svc+0x48/0xe0)
  267. Exception stack(0xde065f48 to 0xde065f90)
  268. 5f40: de065f90 00000000 3cb77dcc 00000000 3b9aec30 00000000
  269. 5f60: 000003ff feb3cfff c1aaf0b8 00000001 c1297a1c c0974490 c09260c0 de065f90
  270. 5f80: c0488a2c c0448150 60000013 ffffffff
  271. [<c0433bc8>] (__irq_svc+0x48/0xe0) from [<c0448150>] (rk30_idle+0x44/0x74)
  272. [<c0448150>] (rk30_idle+0x44/0x74) from [<c0690a2c>] (cpuidle_idle_call+0xa4/0x1f0)
  273. [<c0690a2c>] (cpuidle_idle_call+0xa4/0x1f0) from [<c0434e64>] (cpu_idle+0xbc/0xf8)
  274. [<c0434e64>] (cpu_idle+0xbc/0xf8) from [<607e5ff4>] (0x607e5ff4)
  275. CPU2: stopping
  276. [<c043945c>] (unwind_backtrace+0x0/0xf8) from [<c042e44c>] (do_IPI+0x188/0x1bc)
  277. [<c042e44c>] (do_IPI+0x188/0x1bc) from [<c0433bc8>] (__irq_svc+0x48/0xe0)
  278. Exception stack(0xde06df48 to 0xde06df90)
  279. df40: de06df90 00000000 3cb77dcc 00000000 37490fee 00000000
  280. df60: 000003ff feb3cfff c1ab70b8 00000002 c1297a1c c0974490 c09260c0 de06df90
  281. df80: c0488a2c c0448150 60000013 ffffffff
  282. [<c0433bc8>] (__irq_svc+0x48/0xe0) from [<c0448150>] (rk30_idle+0x44/0x74)
  283. [<c0448150>] (rk30_idle+0x44/0x74) from [<c0690a2c>] (cpuidle_idle_call+0xa4/0x1f0)
  284. [<c0690a2c>] (cpuidle_idle_call+0xa4/0x1f0) from [<c0434e64>] (cpu_idle+0xbc/0xf8)
  285. [<c0434e64>] (cpu_idle+0xbc/0xf8) from [<607e5ff4>] (0x607e5ff4)
  286. CPU3: stopping
  287. [<c043945c>] (unwind_backtrace+0x0/0xf8) from [<c042e44c>] (do_IPI+0x188/0x1bc)
  288. [<c042e44c>] (do_IPI+0x188/0x1bc) from [<c0433bc8>] (__irq_svc+0x48/0xe0)
  289. Exception stack(0xde075f48 to 0xde075f90)
  290. 5f40: de075f90 00000000 3cb77dcc 00000000 37491111 00000000
  291. 5f60: 000003ff feb3cfff c1abf0b8 00000003 c1297a1c c0974490 c09260c0 de075f90
  292. 5f80: c0488a2c c0448150 60000013 ffffffff
  293. [<c0433bc8>] (__irq_svc+0x48/0xe0) from [<c0448150>] (rk30_idle+0x44/0x74)
  294. [<c0448150>] (rk30_idle+0x44/0x74) from [<c0690a2c>] (cpuidle_idle_call+0xa4/0x1f0)
  295. [<c0690a2c>] (cpuidle_idle_call+0xa4/0x1f0) from [<c0434e64>] (cpu_idle+0xbc/0xf8)
  296. [<c0434e64>] (cpu_idle+0xbc/0xf8) from [<607e5ff4>] (0x607e5ff4)
  297. fed00000: 00000000 0000003a 0000001d 00001008
  298. fed00010: 00000005 0000004a 00000024 00001008
  299. fed00020: 0000000d 0000004c 00000025 00001008
  300. fed00030: 00000701 00000251 00000128 00001008
  301. fed00040: 00001111 000000a2 00006119 00000000
  302. fed00050: 0000023f 00000200 0000023f 0bb8ea60
  303. fed00060: 0bb8ea60 0bb8ea60 0bb8ea60 00009005
  304. fed00070: 00003f03 00000105 00000211 00000211
  305. fed00080: 00000211 00000211 0bb8ea60 0bb8ea60
  306. fed00090: 0bb8ea60 0bb8ea60 00001110 0000ff00
  307. fed000a0: 0bb8ea60 0000ff00 00000000 00000101
  308. fed000b0: 0000ff01 0000ff01 0000003f 00000000
  309. fed000c0: 00008282 00008282 00000000 00000084
  310. fed000d0: 00006600 0000ff74 000011f0 00001e9f
  311. fed000e0: 00000000 00002004 00002f3f 0000c67f
  312. fed000f0: 0000200b 000000a0 00000000 00000000
  313. fed00100: 00000000 00000000 00000000 00000000
  314. fed00110: 00000000 00000000 00000000 00000000
  315. fed00120: 00000000 00000000 00000000 00000000
  316. fed00130: 00000000 00000000 00000000 00000000
  317. fed00140: 00000064 00000000 00000000 00000000
  318.  
  319. CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7 | VT102 | Offline | ttyUSB0
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!