Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # -----------------------------------------------------------------------------
- #
- # (c) 2009 The University of Glasgow
- #
- # This file is part of the GHC build system.
- #
- # To understand how the build system works and how to modify it, see
- # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture
- # http://ghc.haskell.org/trac/ghc/wiki/Building/Modifying
- #
- # -----------------------------------------------------------------------------
- # Eliminate use of the built-in implicit rules, and clear out the default list
- # of suffixes for suffix rules. Speeds up make quite a bit. Both are needed
- # for the shortest `make -d` output.
- # Don't set --no-builtin-variables; some rules might stop working if you do
- # (e.g. 'make clean' in testsuite/ currently relies on an implicit $RM).
- MAKEFLAGS += --no-builtin-rules
- .SUFFIXES:
- # -----------------------------------------------------------------------------
- # Sanitize environment
- # See Trac #11530
- export GREP_OPTIONS :=
- ifneq "$(filter maintainer-clean distclean clean clean_% help,$(MAKECMDGOALS))" ""
- -include mk/config.mk
- else
- include mk/config.mk
- ifeq "$(ProjectVersion)" ""
- $(error Please run ./configure first)
- endif
- endif
- include mk/custom-settings.mk
- ifeq "$(wildcard distrib/)" ""
- # We're in a bindist
- .PHONY: default
- default:
- @echo 'Run "make install" to install'
- @false
- .PHONY: install show
- install show:
- $(MAKE) --no-print-directory -f ghc.mk $@ BINDIST=YES NO_INCLUDE_DEPS=YES
- # Note [install-strip]
- #
- # install-strip is like install, but it strips the executable files while
- # installing them.
- #
- # From http://www.gnu.org/prep/standards/html_node/Standard-Targets.html:
- #
- # "install-strip should not strip the executables in the build directory
- # which are being copied for installation. It should only strip the copies
- # that are installed. "
- .PHONY: install-strip
- install-strip:
- # See Note [install-strip].
- $(MAKE) --no-print-directory -f ghc.mk INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install BINDIST=YES NO_INCLUDE_DEPS=YES
- else
- .PHONY: default
- default : all
- @:
- # For help, type 'make help'
- .PHONY: help
- help:
- @cat MAKEHELP.md
- # No need to update makefiles for these targets:
- # (the ones we're filtering out)
- REALGOALS=$(filter-out \
- binary-dist \
- binary-dist-prep \
- install-strip \
- sdist sdist-ghc \
- sdist-ghc-prep \
- sdist-windows-tarballs \
- sdist-windows-tarballs-prep \
- sdist-testsuite \
- sdist-testsuite-prep \
- bootstrapping-files \
- framework-pkg \
- clean \
- clean_% \
- distclean \
- maintainer-clean \
- show \
- show! \
- echo \
- help \
- test \
- fulltest \
- slowtest \
- fasttest \
- ,$(MAKECMDGOALS))
- # configure touches certain files even if they haven't changed. This
- # can mean a lot of unnecessary recompilation after a re-configure, so
- # here we cache the old versions of these files so we can restore the
- # timestamps.
- %.old: %
- @set -x && test -f $@ && cmp -s $< $@ || cp -p $< $@
- touch -r $@ $<
- # NB. not the same as saying '%: ...', which doesn't do the right thing:
- # it does nothing if we specify a target that already exists.
- .PHONY: $(REALGOALS) all
- $(REALGOALS) all: mk/config.mk.old mk/project.mk.old compiler/ghc.cabal.old
- ifneq "$(OMIT_PHASE_0)" "YES"
- @echo "===--- building phase 0"
- $(MAKE) --no-print-directory -f ghc.mk phase=0 phase_0_builds
- endif
- ifneq "$(OMIT_PHASE_1)" "YES"
- @echo "===--- building phase 1"
- $(MAKE) --no-print-directory -f ghc.mk phase=1 phase_1_builds
- endif
- @echo "===--- building final phase"
- $(MAKE) --no-print-directory -f ghc.mk phase=final $@
- # if BINARY_DIST_DIR is not set, assume we want the old
- # behaviour of placing the binary dist into the current
- # directory. Provide BINARY_DIST_DIR to put the final
- # binary distribution elsewhere.
- BINARY_DIST_DIR ?= .
- .PHONY: binary-dist
- binary-dist: binary-dist-prep
- mv bindistprep/*.tar.$(TAR_COMP_EXT) "$(BINARY_DIST_DIR)"
- .PHONY: binary-dist-prep
- binary-dist-prep:
- ifeq "$(mingw32_TARGET_OS)" "1"
- $(MAKE) --no-print-directory -f ghc.mk windows-binary-dist-prep
- else
- rm -f bindist-list
- $(MAKE) --no-print-directory -f ghc.mk bindist-list BINDIST=YES
- $(MAKE) --no-print-directory -f ghc.mk unix-binary-dist-prep
- endif
- .PHONY: install-strip
- install-strip:
- # See Note [install-strip].
- $(MAKE) --no-print-directory -f ghc.mk INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
- .PHONY: sdist sdist-ghc sdist-ghc-prep sdist-windows-tarballs sdist-windows-tarballs-prep sdist-testsuite sdist-testsuite-prep
- # Just running `./boot && ./configure && make sdist` should work, so skip
- # phase 0 and 1 and don't build any dependency files.
- sdist sdist-ghc sdist-ghc-prep sdist-windows-tarballs sdist-windows-tarballs-prep sdist-testsuite sdist-testsuite-prep :
- $(MAKE) --no-print-directory -f ghc.mk $@ NO_INCLUDE_DEPS=YES NO_INCLUDE_PKGDATA=YES
- .PHONY: clean distclean maintainer-clean
- clean distclean maintainer-clean:
- $(MAKE) --no-print-directory -f ghc.mk $@ CLEANING=YES
- test ! -d testsuite || $(MAKE) -C testsuite $@
- .PHONY: $(filter clean_%,$(MAKECMDGOALS))
- $(filter clean_%, $(MAKECMDGOALS)) : clean_% :
- $(MAKE) --no-print-directory -f ghc.mk $@ CLEANING=YES
- .PHONY: bootstrapping-files show echo
- bootstrapping-files show echo:
- $(MAKE) --no-print-directory -f ghc.mk $@
- .PHONY: show!
- show!:
- $(MAKE) --no-print-directory -f ghc.mk show NO_INCLUDE_PKGDATA=YES
- ifeq "$(darwin_TARGET_OS)" "1"
- .PHONY: framework-pkg
- framework-pkg:
- $(MAKE) -C distrib/MacOS $@
- endif
- # If the user says 'make A B', then we don't want to invoke two
- # instances of the rule above in parallel:
- .NOTPARALLEL:
- endif
- # Note [validate and testsuite speed]
- #
- # There are 3 different validate and testsuite speed settings:
- # fast, normal and slow.
- #
- # how how used
- # cd tests config. many many by
- # validate && make speed= tests ways whom
- # =============================================================================
- # --fast fast 2 some 1+exs Travis (to stay within time limit)
- # --normal test 1 all 1+exs Phabricator (slow takes too long?)
- # --slow slow 0 all all Nightly (slow is ok)
- #
- # accept 1 all 1
- #
- # `--fast` and `--normal` run one default way, as well as any other ways which
- # are explicitly requested by the test using extra_ways().
- #
- # `make accept` should run all tests exactly once. There is no point in
- # accepting a test for multiple ways, since it should produce the same output
- # for all ways.
- #
- # To make sure all .stderr and .stdout files in the testsuite are never
- # out-of-date, it is useful if Phabricator, via a normal `./validate` and `make
- # test`, runs each test at least once.
- .PHONY: fasttest
- fasttest:
- $(MAKE) -C testsuite/tests CLEANUP=1 SUMMARY_FILE=../../testsuite_summary.txt fast
- .PHONY: test
- test:
- $(MAKE) -C testsuite/tests CLEANUP=1 SUMMARY_FILE=../../testsuite_summary.txt
- .PHONY: slowtest fulltest
- slowtest fulltest:
- $(MAKE) -C testsuite/tests CLEANUP=1 SUMMARY_FILE=../../testsuite_summary.txt slow
Advertisement
Add Comment
Please, Sign In to add comment