Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- #### crowsnest.conf
- #### This is the default config after installation.
- #### It is also used as the default config in MainsailOS.
- #### For details on how to configure this to your needs, see:
- #### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
- #####################################################################
- #### #####
- #### Information about ports and according URL's #####
- #### #####
- #####################################################################
- #### #####
- #### Port 8080 equals /webcam/?action=[stream/snapshot] #####
- #### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
- #### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
- #### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
- #### #####
- #### Note: These ports are default for most Mainsail #####
- #### installations. Using any other port would involve #####
- #### changing the proxy configuration or using URLs #####
- #### with the specific port like #####
- #### http://<ip>:<port>/?action=[stream/snapshot] #####
- #### #####
- #####################################################################
- #### RTSP Stream URL: ( if enabled and supported ) #####
- #### rtsp://<ip>:<rtsp_port>/stream.h264 #####
- #####################################################################
- [crowsnest]
- log_path: /home/pspblink/printer_data/logs/crowsnest.log
- log_level: verbose # Valid Options are quiet/verbose/debug
- delete_log: false # Deletes log on every restart, if set to true
- no_proxy: false # If set to true, no reverse proxy is required. Only change this, if you know what you are doing.
- [cam 1]
- mode: camera-streamer # ustreamer - Provides MJPG and snapshots. (All devices)
- # camera-streamer - Provides WebRTC, MJPG and snapshots. (only RPiOS + RPi 0/1/2/3/4)
- enable_rtsp: false # If camera-streamer is used, this also enables usage of an RTSP server
- rtsp_port: 8554 # Set different ports for each device!
- port: 8080 # HTTP/MJPG stream/snapshot port
- device: /base/soc/i2c0mux/i2c@1/imx708@1a # See log for available devices
- resolution: 1920×1080 # <width>x<height> format
- max_fps: 10 # If hardware supports it, it will be forced, otherwise ignored/coerced.
- #custom_flags: # You can run the stream services with custom flags.
- #v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see log for your camera capabilities.
Advertisement
Add Comment
Please, Sign In to add comment
