Output from flashrom

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
No DMI table found.
Found chipset "Intel Comet Lake U Premium".
Enabling flash write... SPI Configuration is locked down.
FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only.
FREG2: Management Engine region (0x00001000-0x003fffff) is read-only.
Not all flash regions are freely accessible by flashrom. This is most likely
due to an active ME. Please see https://flashrom.org/ME for details.
At least some flash regions are write protected. For write operations,
you should use a flash layout and include only writable regions. See
manpage for more details.
Enabling hardware sequencing because some important opcode is locked.
OK.
Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000.
Reading old flash chip contents... done.
Erasing and writing flash chip... Transaction error between offset 0x00000000 and 0x00000fff (= 0x00000000 + 4095)!
Reading current flash chip contents... done. Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Good, writing to the flash chip apparently didn't do anything.
This means we have to add special support for your board, programmer or flash
chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!