Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- libHPDMC SDRAM initialization runtime
- (c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3.
- Version 1.0
- Initialization sequence completed.
- Autocalibration OK, testing memory...
- All SDRAM initialization completed, boot continuing.
- VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0
- VGA: DDC I2C bus initialized
- VGA: mode set to 640x480
- MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org
- (c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, version 3 of the License.
- I: BIOS CRC passed (86e23684)
- BRD: SoC 1.0 on Milkymist One (PCB revision 2)
- BRD: Mem. card : Yes
- BRD: AC'97 : Yes
- BRD: PFPU : Yes
- BRD: TMU : Yes
- BRD: Ethernet : Yes
- BRD: FML meter : Yes
- BRD: Video in : Yes
- BRD: MIDI : Yes
- BRD: DMX : Yes
- BRD: IR : Yes
- BRD: USB : Yes
- BRD: Memtester : No
- TMU: texture mapping unit initialized
- USB: loading Navre firmware
- USB: starting host controller
- USB: HC: softusb-input v1.0
- UKB: USB keyboard connected to console
- I: Displaying splash screen...USB: HC: Low speed device on port A
- USB: HC: Low speed device on port B
- OK
- I: MAC address: 10:e2:d5:00:00:30
- I: Press Q or ESC to abort boot
- I: Aborted boot on user request
- BIOS> USB: HC: VID: 0E6A, PID: 6001
- USB: HC: VID: 093A, PID: 2510
- USB: HC: Found keyboard
- USB: HC: Found mouse
- serialboot
- I: Attempting serial firmware loading
- sL5DdSMmkekro
- [FLTERM] Received firmware download request from the device.
- [FLTERM] Uploading kernel (60368 bytes)...
- [FLTERM] Upload complete (9.9KB/s).
- [FLTERM] Booting the device.
- [FLTERM] Done.
- *** Milkymist One automated tests starting...
- Select a test category below, or hit ENTER to run all tests:
- a: SDRAM
- b: GPIO
- c: VGA
- d: Memory card
- e: Audio
- f: Ethernet
- g: Video input
- h: MIDI
- i: DMX512
- j: Infrared
- k: USB
- *** Running tests in category: SDRAM
- A8: [ PASSED ]
- A9: [ PASSED ]
- A10: [ PASSED ]
- A11: [ PASSED ]
- A12: [ PASSED ]
- Random pattern: [ PASSED ]
- Hammer pattern: [ PASSED ]
- Crosstalk pattern: [ PASSED ]
- *** Running tests in category: GPIO
- SW1:
- Press the button. f to fail test, s to skip. [ PASSED ]
- SW2:
- Press the button. f to fail test, s to skip. [ PASSED ]
- SW3:
- Press the button. f to fail test, s to skip. [ PASSED ]
- LED2:
- Is the LED on? (y/n/s) [ PASSED ]
- LED3:
- Is the LED on? (y/n/s) [ PASSED ]
- *** Running tests in category: VGA
- DDC: [ PASSED ]
- Test card:
- Is the picture OK? (y/n/s) [ PASSED ]
- *** Running tests in category: Memory card
- Card initialization: [ PASSED ]
- Block read: [ PASSED ]
- *** Running tests in category: Audio
- Codec probe: [ PASSED ]
- Line and headphones outputs:
- Is the test tone OK? (y/n/s/r) [ PASSED ]
- Microphone:
- Recording...Playing...
- Is the audio played back? (y/n/s/r) [ PASSED ]
- Line input:
- Recording...Playing...
- Is the audio played back? (y/n/s/r) [ PASSED ]
- *** Running tests in category: Ethernet
- MDIO: [ PASSED ]
- ARP resolution: [ PASSED ]
- *** Running tests in category: Video input
- Decoder probe:
- VIN: I2C bus initialized [ PASSED ]
- Capture:
- Press a key to start capturing
- Waiting for a captured frame. f to fail test, s to skip.
- LOCKS: 7
- AD_RESULT: 4
- Is the picture OK? (y/n) [ PASSED ]
- *** Running tests in category: MIDI
- Loopback: [ FAILED ]
- *** Running tests in category: DMX512
- Loopback: [ PASSED ]
- *** Running tests in category: Infrared
- RC5 reception:
- Press the remote's [1] [3] [5], one by one
- Waiting for remote. e for exit
- should be [0x01], get [0x01], [0x19c1].
- [1] passed
- should be [0x03], get [0x03], [0x11c3].
- [3] passed
- should be [0x05], get [0x03], [0x11c3].
- should be [0x05], get [0x05], [0x19c5].
- [5] passed [ PASSED ]
- *** Running tests in category: USB
- Port A:
- USB: loading Navre firmware
- USB: starting host controller
- USB: HC: softusb-input v1.0
- Press ENTER at the USB keyboard or press the left mouse button...
- USB: HC: Low speed device on port A
- USB: HC: Low speed device on port B
- USB: HC: VID: 0E6A, PID: 6001
- USB: HC: VID: 093A, PID: 2510
- USB: HC: Found keyboard
- USB: HC: Found mouse [ PASSED ]
- Port B:
- Press ENTER at the USB keyboard or press the left mouse button... [ PASSED ]
- ******** TEST SUMMARY ********
- Failed tests:
- - MIDI/Loopback
- Skipped tests: 0
- Failed tests: 1
- Passed tests: 29
- Total tests: 30
- ******** SOME TESTS FAILED ********
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement