Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ostap@mycomp ~> sudo smartctl -x /dev/sda
- [sudo] password for ostap:
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-48-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Scorpio Blue Serial ATA (AF)
- Device Model: WDC WD5000BPVT-08HXZT3
- Serial Number: WD-WX61A7238272
- LU WWN Device Id: 5 0014ee 6582a4f06
- Firmware Version: 03.01A03
- User Capacity: 500 107 862 016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s)
- Local Time is: Thu May 9 14:40:32 2019 EEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 254 (maximum performance)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (11580) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 115) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x7035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2
- 3 Spin_Up_Time POS--K 175 172 021 - 2241
- 4 Start_Stop_Count -O--CK 062 062 000 - 38098
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 1
- 7 Seek_Error_Rate POSR-K 200 200 051 - 0
- 9 Power_On_Hours -O--CK 070 070 000 - 22458
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 088 088 000 - 12134
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 279
- 193 Load_Cycle_Count -O--CK 001 001 000 - 1348352
- 194 Temperature_Celsius -O---K 106 086 000 - 41
- 196 Reallocated_Event_Count -O--CK 199 199 000 - 1
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- 240 Head_Flying_Hours -O--CK 071 071 000 - 21180
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 SATA NCQ Queued Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 22456 -
- # 2 Extended offline Completed without error 00% 22447 -
- # 3 Vendor (0x50) Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 41 Celsius
- Power Cycle Min/Max Temperature: 24/41 Celsius
- Lifetime Min/Max Temperature: 0/61 Celsius
- Lifetime Average Temperature: 39 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 128 (29)
- Index Estimated Time Temperature Celsius
- 30 2019-05-09 12:33 39 ********************
- ... ..( 47 skipped). .. ********************
- 78 2019-05-09 13:21 39 ********************
- 79 2019-05-09 13:22 ? -
- 80 2019-05-09 13:23 24 *****
- 81 2019-05-09 13:24 25 ******
- 82 2019-05-09 13:25 26 *******
- 83 2019-05-09 13:26 27 ********
- 84 2019-05-09 13:27 28 *********
- 85 2019-05-09 13:28 29 **********
- 86 2019-05-09 13:29 30 ***********
- 87 2019-05-09 13:30 30 ***********
- 88 2019-05-09 13:31 31 ************
- 89 2019-05-09 13:32 32 *************
- 90 2019-05-09 13:33 33 **************
- 91 2019-05-09 13:34 33 **************
- 92 2019-05-09 13:35 34 ***************
- 93 2019-05-09 13:36 34 ***************
- 94 2019-05-09 13:37 35 ****************
- ... ..( 4 skipped). .. ****************
- 99 2019-05-09 13:42 35 ****************
- 100 2019-05-09 13:43 36 *****************
- ... ..( 2 skipped). .. *****************
- 103 2019-05-09 13:46 36 *****************
- 104 2019-05-09 13:47 37 ******************
- ... ..( 2 skipped). .. ******************
- 107 2019-05-09 13:50 37 ******************
- 108 2019-05-09 13:51 38 *******************
- ... ..( 2 skipped). .. *******************
- 111 2019-05-09 13:54 38 *******************
- 112 2019-05-09 13:55 39 ********************
- ... ..( 2 skipped). .. ********************
- 115 2019-05-09 13:58 39 ********************
- 116 2019-05-09 13:59 40 *********************
- ... ..( 9 skipped). .. *********************
- 126 2019-05-09 14:09 40 *********************
- 127 2019-05-09 14:10 41 **********************
- ... ..( 29 skipped). .. **********************
- 29 2019-05-09 14:40 41 **********************
- SCT Error Recovery Control command not supported
- Device Statistics (GP/SMART Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 4677 Vendor specific
- ostap@mycomp ~>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement