Tema original en XDA: [URL="http://forum.xda-developers.com/showthread.php?t=2115520"][ROM] CM10.1 AOSP 4.2.2 Jellybean [KANG] [Mar-21][/URL]
Tema original en HTCMania: [URL="http://www.htcmania.com/showthread.php?t=538207"][ROM] CM10.1 AOSP 4.2.2 Jellybean [KANG] [Mar-21][/URL]

[SIZE="3"][U][B]Working[/B][/U][/SIZE]
SMS/MMS
Wi-FI
Data
GPS
Audio
Radio
Camera
Gnow
SD Card
Bluetooth
Native Wi-Fi Tethering
1080p Video Recording


[SIZE="3"][U][B]Not Working[/B][/U][/SIZE]
LPA (Low Power Audio) Playback (broken in all JB roms, and has been for awhile, needs ION)
Some video playback glitches (read Bugs section for more info)


[SIZE="3"][U][B]Bugs[/B][/U][/SIZE]

* Bluetooth is a bit glitchy, I don't have a device to test it with
* MHL doesn't work
* Chrome is glitchy, use a different browser
* Video Playback is glitchy. Don't use Gallery use MX Player and in MX Player settings choose Software decoder


[SIZE="3"][U][B]Installation Instructions[/B][/U][/SIZE]

[B][U]Requirements[/U][/B]
* Rooted (obviously)
* Firmware 3.33 (Universal). Read this post for more infor and download link [URL="http://forum.xda-developers.com/showthread.php?t=1459767"]CLICK HERE[/URL]

[B][U]Installation[/U][/B]
1: If you are coming from another ROM do a full wipe
1a: if this is just an update to THIS ROM BASE you can simply wipe cache and dalvik cache
2: Flash gapps (download below)
3: Reboot
3b: If you want to make changes to the CPU/GPU clock speeds, I/O, or CPU governor settings, edit /system/etc/init.d/99kernel (outlined below)
4: Enjoy CyanogenMod 10.1


[SIZE="3"][U][B]DOWNLOAD[/B][/U][/SIZE]
[B]
* ROM: [url="http://goo.im/devs/Albinoman887/cm-10.1-20130321-Albinoman887-pyramid.zip"]cm-10.1-20130321-Albinoman887-pyramid.zip[/url]

* GApps: [url="http://goo.im/gapps/gapps-jb-20130301-signed.zip"]gapps-jb-20130301-signed.zip[/url]

* goo.im repo: [URL]http://goo.im/devs/Albinoman887/[/URL]
[/B]
[SPOILER]
CM-10.1-02-24-Build2-2013: [url]http://d-h.st/cKn[/url]
CM-10.1-02-24-2013: [url]http://d-h.st/dT6[/url]
CM-10.1-02-23-2013: [url]http://d-h.st/1Xb[/url]
CM-10.1-02-22-2013: [url]http://d-h.st/ex8[/url]
CM-10.1-02-21-2013: [url]http://d-h.st/dD9[/url]
CM-10.1-02-20-2013: [url]http://d-h.st/cQm[/url]
CM-10.1-02-17-2013: [url]http://d-h.st/zon[/url]
CM-10.1-02-16-2013: [url]http://d-h.st/fTQ[/url]
CM-10.1-02-15-2013: [url]http://d-h.st/gao[/url]
CM-10.1-02-14-2013: [url]http://d-h.st/kwH[/url]
CM-10.1-02-13-2013: ¿?
CM-10.1-02-12-2013: [url]http://d-h.st/cFV[/url]
CM-10.1-02-10-2013: [url]http://d-h.st/w1r[/url]
CM-10.1-02-09-2013: [url]http://d-h.st/x7u[/url]
[/SPOILER]

[SIZE="3"][U][B]Changelog[/B][/U][/SIZE]

[U]Mar-21[/U]
* Merged my device tree with Team-Hydra repo, All future roms will be based on this, Check OP for details
* Updated Kernel base to 3.0.69
* Added frandom support to kernel for people who want it
* Switched to PM_FAST in kernel (high power wi-fi when screen is off)
* [URL="http://changelog.bbqdroid.org/#pyramid/cm10.1/next"]Host of upstream Changes[/URL]
* Cleanup

[SPOILER]
[U]Mar-15[/U]
* [URL="http://changelog.bbqdroid.org/#pyramid/cm10.1/next"]Upstream Changes[/URL]

[U]Mar-14 (internal)[/U]
* Upstream Changes (mainly translations)

[U]Mar-13 (internal)[/U]
* Re-added a couple build.prop settings (mainly data/network related)
* Disabled libv8 optimizations since we don't have the correct qcom props (thanks intervirgil)
* Forgot to change governor to ondemand when i added back the configs for it in the init script
* Cleaned up the sweep2wake configuration
* Changed kernel version string back to ChronicKernel, Kernel is so heavily modified now it deserves it's own name
* Upstream: frameworks/base: Added Volume Tile to Quicksettings
* Upstream: Phone: Settings: do not override network mode on read
* Upstream: cLock: Fix error when the weather data from Yahoo is incomplete
* Many upstream translations changes and other small things not worth listing here

[U]Mar-11-build2[/U]
* Reverted the removal of CPU min/max freq, CPU gov, and I/O (ondemand still default)
* Upstream changes

[U]Mar-11[/U]
* Updated kernel base to Linux 3.0.68
* Removed settings from kernel init script that can be configured in CM's Performance settings menu
Note: init script still sets min cpu freq to 384mhtz as its still strongly advised
* Set default governor to ondemand
* Added support in kernel init script to enable tun.ko
* Upstream changes. I think there were some updates to DeskClock (alarm clock) and a few other minor updates

[U]Mar-9[/U]
* Fixed video recording with FFC. If you still get Force Closes clear data and cache for Gallery
* Imported bruce's media_codecs.xml and media_profiles.xml (this is what fixed FFC video recording)
* Minor upstream changes

[U]Mar-8 (Internal)[/U]
* Fixed Volume Rocker Wake not showing in Settings>Display
* Reverted CRT Hack in kernel - Not needed for cm-10.1
* Now using Team-Hydra display-legacy and media legacy repos as they are maintained
* Switched to Team-Hydra frameworks/av repo as it has a more complete Camera patch
* Merged ne

[U]Mar-6[/U]
* Finally figured out the math behind mapping pemem so I could increase its size without trashing FrameBuffer
* Soft-reboots should be gone now due to the PMEM increase
* A Couple cherry-picks that might help with video playback (probably not though)
* Upstream: Switched to new superuser by koush
* Other upstream changes I don't remember. Check Gerrit for details.

[U]Mar-3[/U]
* Updated kernel base to Linux 3.0.67
* Switched to badass for default governor
* Full GooManager support
* Cleaned up kernel defconfig and disabled a few more un-needed debugging options
* Upstream: Brightness tile (toggle) fix
* Cherry Pick: Camera: add exposure and JPEG quality settings to video camera
* Cherry Pick (Update): Camera: add much more scene & focus modes
* Other upstream changes not listed here, Mainly translations

[U]Mar-2 (internal)[/U]
* Reverted all the pmem changes, Can't reporduce gralloc crash anymore with latest upstream changes, it seems
* Enabled libv8 Optimizations
* Switched to new display-legacy and media-legacy repo's, fixed video thumbnails not working correctly
* Upstream changes

[U]Mar-1[/U]
* Ok 3rd times the charm: Fixed display glitches
* Fixed gov for 2nd cpu not being set
* Added Goo Manager
* Lots of upstream changes

[U]Feb-27[/U]
* Really fixed the display glitches introduced in last build (thanks NLJ)
* Re-enabled sweep2wake in kernel (still disabled by default) as NLJ's fix as become more stable
* Re-enabled lagfree cpu governor and VR I/O scheduler
* Some upstream changes

[U]Feb-24-Build2[/U]
* Upstream Changes: Mainly translations and one fix for the pull down notifications (very minor, mainly when clearing notifications when there is only one)
* Re-added ROM specific changelog to build (got lost during merge to 4.2.2)
* Fixed display glitches from the last build

[U]Feb-24[/U]
* Upstream changes
* Tweaked low-end cpu voltages a bit to try and fix soft-reboots when waking the device
* removed the two highest freq's as thats a little high for a stock kernel
* Switched back to GZIP compression because it now confrimed LZO has no performance boost and makes a bigger kernel which takes longer to boot, S-ON lingeer'rs give hhis a try please maybe we will be lucky
* Removed VR I/O scheduler
* Possibly fixed the gralloc errors errors (and subsequent reboot) by increasing pmem size in kernel (thanks bruce)
* Switched back to audio-legacy to try and address gtalk video chat issues

[U]Feb-23[/U]
* Further trimmed the kernel to hopefully reslove bootloops for the stragglers
* Kernel now compiled with a linaro Cortex-a8 optimized toolchain
* Remozed lagfree gov
* Some upstream changes, Mainly framework
* Switched to RIL legacy to try and fix carrier issues (this is how it is in bruce's repo)

[U]Feb-22-build-2[/U]
* Really fixed bootloops
* Forgot to merge upstream changes for Camera in last build

[U]Feb-22[/U]
* Tried to resolve bootloops for some people
* Uploaded a number of test kernels if there are still issues
* A decent about of Upstream changes

[U]Feb-21[/U]
* Kernel now based on bruce's branch
* merged voltage table from ChronicKernel
* Merged changes from sultan kernel to compile with linaro
* Disabled ZRAM and KSM
* Fixed Sweep2Wake (thanks NLJ)
* Disabled some kernel debuging
* Added max screen off freq config in kernel init script
* Added SIO, User configurable GPU OC, Fsync control
* Minor Upstream changes

[U]Feb-20[/U]
* Fixed FFC (Front Facing Camera)
* Fixed Superuser
* Updated Kernel
* Upstream: HDR Camera
* Increased headset playback volume
* A few upstream changes

[U]Feb-19[/U]
* ChronicKernel: Updated base to match the latest Sultan kernel
* ChronicKernel: Bumped up CPU Voltages by 25mV, hopefully will solve soft-reboots for some people)
* Updated Camera to match upstream (forgot to merge the changes for 4.2.2)
* Possibly fixed Camera auto-focus (let me know)
* Optimized build thanks to some commits on gerrit
* Full device tree based off or CyanogenMod repos
* Vendor tree now based off of bruce2728's vendor repo
* Upstream Changes
* Bugfix: Keyboard lag is gone, was a upstream fix

[U]Feb-17[/U]
* More upstream changes
* Re-added one more build.prop tweak (let me know)

[U]Feb-16[/U]
* Minor Upstream changes/fixes
* Re-enabled a couple build.prop settings

[U]Feb-15[/U]
* Upstream; Updated to VOSP 4.2.2 base
* ChronicKernel: Revert Update to Linux 3.0.63
* Brought msm8660-common device tree inline with dastin1015;s
* Slimed down system.prop a lot to somewhat match bruce's tree, see how this does
* No longer build with audio-legacy use CM display-caf source
* No longer build from Evervolv/display-legacy, use dastin's repo instead
* Removed un-needed settings in BoardConfigCommon.mk
* Brought pyramid device tree in line with bruce's

[U]Feb-14[/U]
* ChronicKernel: Set the readahead back to default AGAIN (i'm done touching this lol)
* Reverted a build.prop setting that might be related to the decreased battery life
* ChronicKernel: Removed KSM (Better performance)
* ChronicKernel: Removed ZRAM
* ChronicKernel: Enabled 2-phase ondemand governor (as in Bruce's Kernel)
* Set default CPU Freq back to 1566mhtz (honestly runs better at this freq)

[U]Feb-13[/U]
* ChronicKernel: Updated to Linux 3.0.63
* ChronicKernel: Set readahead to dynamic value (32>512)
* ChronicKernel: Set vm_swappines to 0 (not using swap by default so no reason to have it at 60)
* Tryed to fix clock drift by changing timers in Kernel
* Some minor upstream changes (mainly translations)

[U]Feb-12[/U]
* ChronicKernel: Reverted readahead buffer back to default
* Added a few missing build.prop settings. May help battery and odd carrier issues
* Upstream changes
* Added one more scrolling tweak to build.prop

Note: For the best battery life i recomend badass with max freq at 1566Mhtz. I got over 24 hrs with a decent amount of use with this setting, but the default are still good and give the best performance.

[U]Feb-10[/U]
* Upstream: Added FM Radio Support
* ChronicKernel: Camera flash disabled if battery power is less then 10%
* ChronicKernel: Removed smartassv2 Governor (I don't even think this works with our device)
* ChronicKernel: Now using LZO Compression. Little slower boot (on the HTC splash) but much faster overall
* ChronicKernel: While booting CPU FREQ is set to 1512Mhtz for faster bootup
* ChronicKernel: Updated the 89kernel init script (now named 99kernel) The only features that were working were GPU OC)
* ChronicKernel init script: Added user-configurable CPU Min/Max Freq
* ChronicKernel init script: Added user-configurable default GPU Governor (diabled by default - will choose internal kernel value)
* ChronicKernel init script: Added user-configurable default I/O scheduler (deadline, CFQ, SIO, VR)
* ChronicKernel init script: Fixed ZRAM Enable/Disable Config (disabled by default)
* ChronicKernel init script: Fixed bug where if you didn't have badass set as default in the 99kernel it would fail to set your desired BadAss Config setting
* ChronicKernel: Increased readahead buffer to 1024. Seems to spped up I/O operations and app loading, tell me what you think
* Moved the scrolling tweaks to the bottom of the build.prop so there is no chance of them being overidden
* Bumped CPU Max Freq up one step. Lets see how the battery does
* Removed all prebuilt moden firmware (thanks dastin1015) I have known about this issue for awhile now and i think it might fix a lot of strange issues of soft-reboots and odd carrier behavior

** Note: For the best battery life I recomend badass, but ondemand is still default as it is the snappiest

[U]Feb-9[/U]
* Build GPS from CM source (locks a lot better now, it seems)
* Upstream Changes

[U]Feb-7-Build-2[/U]
* Really Fixed GPS soft-reboot
* Reverted: Upstream: Squashed commit of GPS changes from CodeAurora (does not play nicely with sensation)
* Switched back to gps-legacy
* Removed CMUpdateer (our device can't use this)
* Added additional changelog information about ROM-specific changes (can be viewed in About Phone)

[U]Feb-7[/U]
* Fixed GPS Soft-reboot
* Fixed FC when long-pressing an app
* Upstream: Squashed commit of GPS changes from CodeAurora
* General upstream changes

[U]Feb-6[/U]
* Fixed GPS not working from last build
* No longer build from gps-legacy, use CM source
* Upstream: Contacts: Lots of clean up and optimization
* Other upstream changes I am not listing here. Check gerrit for more details
* Kernel: Added mpdecision fix for freq <384hmtz (still not not advised) credits: android1234567
* Kernel: Updated to Linux 3.0.62

[U]Feb-4 Build 2[/U]
* Fixed pinch to zoom for camera (all credits go to tarfu)

[U]Feb-4[/U]
* New kernel base
* User Configurable GPU Overclock. (/system/etc/init.d/89kernel)
* Removed Sweep2Wake
* CPU Overclockable to 1.94Ghtz
* Undervolted CPU a bit more
* Kernel now compiled iwith Linaro
* Added scrolling build.prop tweaks
* Increased Wi-Fi voltage
* Upstream Changes
* Cherry picked commit for Contects that will maybe improve scrolling

[U]Feb-2[/U]
* Native WiFI tether works
* Preliminary FM Radio support
* Upstream Changes
* Overall snappier do to optimization

[U]Jan-31[/U]
* Reverted native tether fix to fix the SSID scanning
* Removed bcmhd module from device tree as its in kernel
* Upstream changes

[U]Jan-30[/U]
* Fixed LocationProvider Wakelock
* Fixed 1080p video recording
* Fixed Native WiFI Tethering (have only tested with unsecured network)
* Upstream Changes
* Updated local_manifest.xml for people compiling from source (will soon just start hosting it on github)

[U]Jan-29[/U]
* Really fixed GPS
* Fixed WiFi Tethering (Barnacle only))
* Cherry picked a bT patch for 48 htz playback
* Fixed volume
* Removed mpdecision (kernel has this)
* Updated build.prop to be in-line with bruce and others
* Anyone who was having slow data should be fine now
* Updated kernel to Linux 3.0.61
* Sweep2Wake disabled by default (could very well be cause of batt drain and sensor issues)
* Probably some other changes I forgot

[U]Jan-27[/U]
* Fixed GPS
* Possibly fixed Bluetooth Issues
* Upstream Changes

[U]Jan-26[/U]
* Removed Evervolv default wallpaper (i'm an idiot)
* Cleaned up code (reverted some changes by Evervolv)
* Tryed to fix the bugs with bluetooth but have no device's to test it with
* Upstream Changes as of 11am PST

[U]Jan-25[/U]
* Fixed some Display glitches
* Removed thermald.conf to match bruce's branch
* Switched Kernel base - (OC/UV - Thanks bruce)
* Upstream changes

[U]Jan-24-Build2[/U]
* Fixed Camera
* Fixed Signal Strength icon
* Re-added Torch

[U]Jan 24[/U]
* initial build[/SPOILER]

[SIZE="3"][U][B]Notes[/B][/U][/SIZE]

* [B]As of Feb-19 CyanognMod changed the way the reboot menu works.[/B] To enable the "Advanced Reboot" menu with recovery and bootloader go to Settings>Developer Options and [B]Check Advanced Reboot[/B]

* [B]As of AOSP 4.2.2 ADB now has a whitelist feature.[/B] On first connect with adb it will say [B]device offline[/B] You need to [B]update your ADB[/B] then with the [B]phone connected[/B]. [B]Disable and Re-Enable Android Debugging in the Developer Options menu[/B]. It will ask if you want to [B]accept and show the PC's RSA key. Select Yes[/B] and it will now work as expected

* [B]If your homescreen does not look right[/B] (big margins) go to System Settings>Launcher>homescreen click [B]Stretch screens[/B]. Then [B]choose grid size and set rows to 5[/B].

* [B]As of AOSP 4.2.1 Developer Options and Performance setting menu options are hidden[/B] until you [B]go into about phone and tap build number[/B] repeatedly (aprox. 6 times) this only needs to be done once

* [B]If you are having a lot of soft reboots[/B] when waking the device [B]set you min CPU freq. to 384htz[/B] in Performance settings. (What? no Performance settings? ummm look up hehe)

* If you are coming from [B]another ROM[/B] i highly recommend you perform and [B]Wipe Date/Factory Reset[/B] in recovery menu when applying this ROM.

* The gapps linked to does not have photosphere. As far as i know it's not supposed to. If you want photophere search for the flashable zip

* If you can't get MMS to work. Send yourself a MMS. or just wait a day. eventually they will work again

[B]* For the best battery life I suggest the stock settings with the exception of the ONDEMAND governor. Switching to BADASS will yield best battery results[/B]


[SIZE="3"][U][B]Kernel[/U][/B][/SIZE]

[I][U]ChronicKernel[/U][/I]

Kernel now based on Bruce's kernel with a few changes by me, including:

* Compiled with linaro
* Set flash to disable if battery is below 10% to prevent the random shut-off when taking a pic
* Removed/Disabled KSM
* Removed ZRAM
* User-configurable GPU OC (Not OC'd by default)
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* Added more I/O schedulers
* Tweaked voltages a bit
* Reverted CRT hack to smooth animation in Android 4.2.2
* Increased PMEM_MDP as it is needed in Android 4.2.2 to fix soft-reboots

These settings were changed by me to help make the kernel more stable with our ROM, observed with tests by me. If you want more features of the Sultan kernel feel free to flash it, but support will not be provided in this thread.

[B][U]Other Features of the kernel include:[/U][/B]

* OC to 1866Mhtz (default 1566Mhtz)
* Undervolted
* User-configurable CPU OC
* User-configurable CPU default governor (ondemand = default)
* User-configurable I/O scheduler (default = SIO)
* User-configurable badass gonvernor (default = balanced)
* Sweep2Wake

You can edit many of the settings in /system/etc/init.d/99kernel, here is a snippet of the script with all the config options


[SIZE="4"][B][U]Credits[/U][/B][/SIZE]

* First off of course cyanogen, the CyanogenMod project and all who contribute.
* Bruce2728 for doing all the leg-work originally to get get CM-10 on our Sensation, most of which was used for CM-10.1
* Evervolv Team for their device tree. This was largely what was needed to get the build going.
* mikez for all his work on the Evervolv/pyramid tree.
* NLJ for making the diff patch of Evervolv's frameworks_av repo to get camera working
* jiggs82 for all his helpful hints.
* And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
* dastin1015 for answering all my n00bish questions, and providing helpful hints and solutions
* android1234567 for all the help with the kernel, without you we wouldn't have new kernel
* tarfu for fixing camera p2z
* blahb14hblah for his hint to the extra scrolling tweak in frameworks/base
* NLJ for fixing the Sweep2Wake proximity sensor issue
* Skipjacks for maintaining the Q&A thread


[SIZE="4"][B][U]Algunas capturas de pantalla[/U][/B][/SIZE]