Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- User Access Verification
- Username: tommy
- Password:
- TermServ#
- TermServ#com02
- Translating "com02"
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#com02
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#com02
- Translating "com02"
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#show line
- Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
- 0 0 CTY - - - - - 0 0 0/0 -
- 1 1 AUX 9600/9600 - - - - - 0 0 0/0 -
- 2 2 TTY 9600/9600 - - - - - 0 0 0/0 -
- 0/0/0 3 TTY 9600/9600 - - - - - 29 93 0/0 -
- * 0/0/1 4 TTY 9600/9600 - - - - - 100 467 4146/0 -
- 0/0/2 5 TTY 9600/9600 - - - - - 38 127 1508/0 -
- 0/0/3 6 TTY 9600/9600 - - - - - 30 85 3998/0 -
- 0/0/4 7 TTY 9600/9600 - - - - - 55 224 0/0 -
- 0/0/5 8 TTY 9600/9600 - - - - - 7 11 0/0 -
- 0/0/6 9 TTY 9600/9600 - - - - - 111 446 5361/0 -
- 0/0/7 10 TTY 9600/9600 - - - - - 16 49 0/0 -
- 0/0/8 11 TTY 9600/9600 - - - - - 7 0 0/0 -
- 0/0/9 12 TTY 9600/9600 - - - - - 0 0 0/0 -
- 0/0/10 13 TTY 9600/9600 - - - - - 1 0 0/0 -
- 0/0/11 14 TTY 9600/9600 - - - - - 0 0 0/0 -
- 0/0/12 15 TTY 9600/9600 - - - - - 1 12 0/0 -
- 0/0/13 16 TTY 9600/9600 - - - - - 0 0 0/0 -
- 0/0/14 17 TTY 9600/9600 - - - - - 36 530 0/0 -
- 0/0/15 18 TTY 9600/9600 - - - - - 2 1 0/0 -
- * 388 388 VTY - - - - - 569 0 0/0 -
- 389 389 VTY - - - - - 228 0 0/0 -
- 390 390 VTY - - - - - 71 0 0/0 -
- 391 391 VTY - - - - - 13 0 0/0 -
- 392 392 VTY - - - - - 10 0 0/0 -
- 393 393 VTY - - - - - 0 0 0/0 -
- 394 394 VTY - - - - - 0 0 0/0 -
- 395 395 VTY - - - - - 0 0 0/0 -
- Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
- 396 396 VTY - - - - - 0 0 0/0 -
- 397 397 VTY - - - - - 0 0 0/0 -
- 398 398 VTY - - - - - 0 0 0/0 -
- 399 399 VTY - - - - - 0 0 0/0 -
- 400 400 VTY - - - - - 0 0 0/0 -
- 401 401 VTY - - - - - 0 0 0/0 -
- 402 402 VTY - - - - - 0 0 0/0 -
- 403 403 VTY - - - - - 0 0 0/0 -
- 404 404 VTY - - - - - 0 0 0/0 -
- 405 405 VTY - - - - - 0 0 0/0 -
- 406 406 VTY - - - - - 0 0 0/0 -
- 407 407 VTY - - - - - 0 0 0/0 -
- 408 408 VTY - - - - - 0 0 0/0 -
- 409 409 VTY - - - - - 0 0 0/0 -
- 410 410 VTY - - - - - 0 0 0/0 -
- 411 411 VTY - - - - - 0 0 0/0 -
- 412 412 VTY - - - - - 0 0 0/0 -
- 413 413 VTY - - - - - 0 0 0/0 -
- 414 414 VTY - - - - - 0 0 0/0 -
- 415 415 VTY - - - - - 0 0 0/0 -
- 416 416 VTY - - - - - 0 0 0/0 -
- 417 417 VTY - - - - - 0 0 0/0 -
- 418 418 VTY - - - - - 0 0 0/0 -
- 419 419 VTY - - - - - 0 0 0/0 -
- 420 420 VTY - - - - - 0 0 0/0 -
- 421 421 VTY - - - - - 0 0 0/0 -
- 422 422 VTY - - - - - 0 0 0/0 -
- TermServ#clear line 0/0/1
- [confirm]t [OK]
- TermServ#clear line 0/0/1
- [confirm]
- [OK]
- TermServ#
- TermServ#cpom02
- Translating "cpom02"
- Translating "cpom02"
- % Bad IP address or host name
- % Unknown command or computer name, or unable to find computer address
- TermServ#com02
- Translating "com02"
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#com02
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#com02
- Translating "com02"
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#com02
- Translating "com02"
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#com02
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#com02
- Trying COM02 (10.1.1.1, 2004)...
- % Connection refused by remote host
- TermServ#com04
- Translating "com04"
- Trying COM04 (10.1.1.1, 2006)... Open
- User Access Verification
- Username: tommy
- Password:
- g...... OK
- Detecting Hardware ...
- Installing ether-pow driver - 0x6008
- starting pid 907, tty '/dev/ttyS0': '/usr/bin/gettyOrMwar'
- Setting up ZVM
- Exporting LD_LIBRARY_PATH
- Cryptographic library self-test....
- Testing SHA1 Short Message 1
- Testing SHA256 Short Message 1
- Testing SHA1 Short Message 1
- SHA1 POST PASSED
- passed!
- XML config selected
- Validating XML configuration
- octeon_device_init: found 1 DPs
- /dev/fpga: No such device or address
- readCPUConfigData: cardid 0x6060001
- Cisco is a trademark of Cisco Systems, Inc.
- Software Copyright Cisco Systems, Inc. All rights reserved.
- Cisco AireOS Version 8.2.166.0
- Firmware Version PIC 20.0
- Initializing OS Services: ok
- Initializing Serial Services: ok
- Initializing Network Services: ok
- Error (256) found in fsck check - attempt to repair.
- Initializing Licensing Services:
- License daemon start initialization.....
- ok
- Starting Statistics Service: ok
- License daemon running.....
- Starting Licensing Services: ok
- Starting ARP Services: ok
- Starting Trap Manager: ok
- Starting Network Interface Management Services: ok
- Starting System Services: ok
- Starting FIPS Features: ok : Not enabled
- Starting SNMP services: ok
- Starting Fastpath Hardware Acceleration: ok
- Starting Fastpath Console redirect : ok
- Starting Fastpath DP Heartbeat : ok
- Fastpath CPU0.00: Starting Fastpath Application. SDK-1.8.0, build 269. Flags-[DUTY CYCLE] : ok
- Fastpath CPU0.00: Initializing last packet received queue. Num of cores(2)
- Fastpath CPU0.00: Init MBUF size: 1856, Subsequent MBUF size: 2040
- Fastpath CPU0.00: Core 0 Initialization: ok
- Fastpath CPU0.00: Initializing Timer...
- Fastpath CPU0.00: Initializing Timer...done.
- Fastpath CPU0.00: Initializing Timer...
- Fastpath CPU0.00: Initializing NBAR AGING Timer...done.
- Fastpath CPU0.01: Core 1 Initialization: ok
- Starting Switching Services: ok
- Starting QoS Services: ok
- Starting Policy Manager: ok
- Starting Data Transport Link Layer: ok
- Starting Access Control List Services: ok
- Starting System Interfaces: ok
- Starting Client Troubleshooting Service: ok
- Starting Certificate Database: ok
- Starting VPN Services: ok
- Starting Management Frame Protection: ok
- Starting DNS Services: ok
- Starting Redundancy: ok
- Start rmgrPingTaskok
- Starting LWAPP: ok
- Starting CAPWAP: ok
- Starting LOCP: ok
- Starting Security Services: ok
- Starting Policy Manager: ok
- Starting Authentication Engine: ok
- Starting Mobility Management: ok
- Starting Ethernet-over-IP: ok
- Starting Capwap Ping Component: ok
- Starting AVC Services: ok
- Starting AVC Flex Services: ok
- Starting Virtual AP Services: ok
- Starting AireWave Director: ok
- Starting Network Time Services: ok
- Starting Cisco Discovery Protocol: ok
- Starting Broadcast Services: ok
- Starting Logging Services: ok
- Starting DHCP Server: ok
- Starting IDS Signature Manager: ok
- Starting RFID Tag Tracking: ok
- Starting RF Profiles: ok
- Starting Power Supply and Fan Status Monitoring Service: ok
- Starting Mesh Services: ok
- Starting TSM: ok
- Starting CIDS Services: ok
- Starting Ethernet-over-IP: ok
- Starting DTLS server: enabled in CAPWAP
- Starting CleanAir: ok
- Starting WIPS: ok
- Starting SSHPM LSC PROV LIST: ok
- Starting RRC Services: ok
- Starting SXP Services: ok
- Starting Alarm Services: ok
- Starting FMC HS: ok
- Starting IPv6 Services: ok
- Starting Config Sync Manager : ok
- Starting Hotspot Services: ok
- Starting Tunnel Services New: ok
- Starting Portal Server Services: ok
- Starting mDNS Services: ok
- Starting Management Services:
- Web Server: CLI: Secure Web: Web Authentication Certificate not found (error). If you cannot access management interface via HTTPS please reconfigure Virtual Interface.
- Enabling Controller Provisioning
- Configuring management interface
- Starting Internal DHCP server
- dhcp pool 192.168.1.3(0xc0a80103) - 192.168.1.14(0xc0a8010e), network 192.168.1.0(0xc0a80100) netmask 255.255.255.240(0xfffffff0), default gateway 192.168.1.1
- Enabling mgmt via wireless
- Enabling Provisioning SSID
- SSID: CiscoAirProvision, Admin Status: 1, Interface Name: management, 802.11 Auth: WPA2-PSK, Wi-Fi Protected Access : Enabled
- (Cisco Controller)
- Welcome to the Cisco Wizard Configuration Tool
- Use the '-' character to backup
- Would you like to terminate autoinstall? [yes]:
- System Name [Cisco_b9:a1:25] (31 characters max):
- Enter Administrative User Name (24 characters max): admin
- Enter Administrative Password (3 to 24 characters): *******
- Re-enter Administrative Password : *******
- Enable Link Aggregation (LAG) [yes][NO]: no
- Management Interface IP Address: 192.168.60.148
- Management Interface Netmask: 255.255.255.0
- Management Interface Default Router: 192.168.60.1
- Cleaning up Provisioning SSID
- Management Interface VLAN Identifier (0 = untagged): 0
- Management Interface Port Num [1 to 4]: 1
- Management Interface DHCP Server IP Address: 192.168.60.1
- Virtual Gateway IP Address: 1.1.1.1
- Multicast IP Address: 219.0.0.219
- Err: Invalid multicast address.
- Multicast IP Address: 293.0.0.293
- Invalid response
- Multicast IP Address: 239.0.0.239
- Mobility/RF Group Name: lab
- Network Name (SSID): cisco
- Configure DHCP Bridging Mode [yes][NO]: no
- Allow Static IP Addresses [YES][no]: yes
- Configure a RADIUS Server now? [YES][no]: no
- Warning! The default WLAN security policy requires a RADIUS server.
- Please see documentation for more details.
- Enter Country Code list (enter 'help' for a list of countries) [US]:
- Enable 802.11b Network [YES][no]:
- Enable 802.11a Network [YES][no]:
- Enable 802.11g Network [YES][no]:
- Enable Auto-RF [YES][no]: no
- Configure a NTP server now? [YES][no]: no
- Configure the system time now? [YES][no]: no
- Warning! No AP will come up unless the time is set.
- Please see documentation for more details.
- Would you like to configure IPv6 parameters[YES][no]: no
- Configuration correct? If yes, system will save it and reset. [yes][NO]: yes
- Cleaning up DHCP Server
- Cleaning up Provisioning SSID
- Configuration saved!
- Resetting system with new configuration...
- Creating license client restartability thread
- Updating license storage ... Done.
- Cannot Cancel the WDT. Not petting the WDT.
- Exit Called
- Switchdrvr exited!
- Restarting system.
- WLCNG Boot Loader Version 1.0.20 (Built on Jan 9 2014 at 19:02:44 by cisco)
- Board Revision 0.0 (SN: PSZ20341GD8, Type: AIR-CT2504-K9) (P)
- Verifying boot loader integrity... OK.
- OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz data rate)
- CPU Cores: 4
- DRAM: 1024 MB
- Flash: 32 MB
- Clearing DRAM........ done
- Network: octeth0', octeth1, octeth2, octeth3
- ' - Active interface
- E - Environment MAC address override
- CF Bus 0 (IDE): OK
- IDE device 0:
- - Model: 1GB CompactFlash Card Firm: CF B61FK Ser#: C141100294A10q3G8TVS
- - Type: Hard Disk
- - Capacity: 977.4 MB = 0.9 GB (2001888 x 512)
- Press <ESC> now to access the Boot Menu...
- Loading primary image (8.2.166.0)
- 100%
- 36881019 bytes read
- Launching...
- Launching images...
- init started: BusyBox v1.6.0 (2010-05-13 17:50:10 EDT) multi-call binary
- starting pid 690, tty '': '/etc/init.d/rcS'
- Decompressing... OK
- Validating...... OK
- Detecting Hardware ...
- Installing ether-pow driver - 0x6008
- starting pid 907, tty '/dev/ttyS0': '/usr/bin/gettyOrMwar'
- Setting up ZVM
- Exporting LD_LIBRARY_PATH
- Cryptographic library self-test....
- Testing SHA1 Short Message 1
- Testing SHA256 Short Message 1
- Testing SHA1 Short Message 1
- SHA1 POST PASSED
- passed!
- XML config selected
- Validating XML configuration
- octeon_device_init: found 1 DPs
- /dev/fpga: No such device or address
- readCPUConfigData: cardid 0x6060001
- Cisco is a trademark of Cisco Systems, Inc.
- Software Copyright Cisco Systems, Inc. All rights reserved.
- Cisco AireOS Version 8.2.166.0
- Firmware Version PIC 20.0
- Initializing OS Services: ok
- Initializing Serial Services: ok
- Initializing Network Services: ok
- Initializing Licensing Services: ok
- License daemon start initialization.....
- Starting Statistics Service: ok
- License daemon running.....
- Starting Licensing Services: ok
- Starting ARP Services: ok
- Starting Trap Manager: ok
- Starting Network Interface Management Services: ok
- Starting System Services: ok
- Starting FIPS Features: ok : Not enabled
- Starting SNMP services: ok
- Starting Fastpath Hardware Acceleration: ok
- Starting Fastpath Console redirect : ok
- Starting Fastpath DP Heartbeat : ok
- Fastpath CPU0.00: Starting Fastpath Application. SDK-1.8.0, build 269. Flags-[DUTY CYCLE] : ok
- Fastpath CPU0.00: Initializing last packet received queue. Num of cores(2)
- Fastpath CPU0.00: Init MBUF size: 1856, Subsequent MBUF size: 2040
- Fastpath CPU0.00: Core 0 Initialization: ok
- Fastpath CPU0.00: Initializing Timer...
- Fastpath CPU0.00: Initializing Timer...done.
- Fastpath CPU0.00: Initializing Timer...
- Fastpath CPU0.00: Initializing NBAR AGING Timer...done.
- Fastpath CPU0.01: Core 1 Initialization: ok
- Starting Switching Services: ok
- Starting QoS Services: ok
- Starting Policy Manager: ok
- Starting Data Transport Link Layer: ok
- Starting Access Control List Services: ok
- Starting System Interfaces: ok
- Starting Client Troubleshooting Service: ok
- Starting Certificate Database: ok
- Starting VPN Services: ok
- Starting Management Frame Protection: ok
- Starting DNS Services: ok
- Starting Redundancy: ok
- Start rmgrPingTaskok
- Starting LWAPP: ok
- Starting CAPWAP: ok
- Starting LOCP: ok
- Starting Security Services: ok
- Starting Policy Manager: ok
- Starting Authentication Engine: ok
- Starting Mobility Management: ok
- Starting Ethernet-over-IP: ok
- Starting Capwap Ping Component: ok
- Starting AVC Services: ok
- Starting AVC Flex Services: ok
- Starting Virtual AP Services: ok
- Starting AireWave Director: ok
- Starting Network Time Services: ok
- Starting Cisco Discovery Protocol: ok
- Starting Broadcast Services: ok
- Starting Logging Services: ok
- Starting DHCP Server: ok
- Starting IDS Signature Manager: ok
- Starting RFID Tag Tracking: ok
- Starting RF Profiles: ok
- Starting Power Supply and Fan Status Monitoring Service: ok
- Starting Mesh Services: ok
- Starting TSM: ok
- Starting CIDS Services: ok
- Starting Ethernet-over-IP: ok
- Starting DTLS server: enabled in CAPWAP
- Starting CleanAir: ok
- Starting WIPS: ok
- Starting SSHPM LSC PROV LIST: ok
- Starting RRC Services: ok
- Starting SXP Services: ok
- Starting Alarm Services: ok
- Starting FMC HS: ok
- Starting IPv6 Services: ok
- Starting Config Sync Manager : ok
- Starting Hotspot Services: ok
- Starting Tunnel Services New: ok
- Starting Portal Server Services: ok
- Starting mDNS Services:
- Failed to add service from xml to profile DB : 6 iTuneWirelessDeviceSharing 2 default-mdns-profileok
- Starting Management Services:
- Web Server: CLI: Secure Web: ok
- (Cisco Controller)
- Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)
- User:
- User:
- User:
- User:admin
- Password:*******
- (Cisco Controller) >
- *** IDLE TIMEOUT ***
- (Cisco Controller)
- User: Creating license client restartability thread
- Exit Called
- Switchdrvr exited!
- Restarting system.
- WLCNG Boot Loader Version 1.0.20 (Built on Jan 9 2014 at 19:02:44 by cisco)
- Board Revision 0.0 (SN: PSZ20341GD8, Type: AIR-CT2504-K9) (P)
- Verifying boot loader integrity... OK.
- OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz data rate)
- CPU Cores: 4
- DRAM: 1024 MB
- Flash: 32 MB
- Clearing DRAM........ done
- Network: octeth0', octeth1, octeth2, octeth3
- ' - Active interface
- E - Environment MAC address override
- CF Bus 0 (IDE): OK
- IDE device 0:
- - Model: 1GB CompactFlash Card Firm: CF B61FK Ser#: C141100294A10q3G8TVS
- - Type: Hard Disk
- - Capacity: 977.4 MB = 0.9 GB (2001888 x 512)
- Press <ESC> now to access the Boot Menu...
- Loading primary image (8.0.152.0)
- 100%
- 38323276 bytes read
- Launching...
- Launching images...
- init started: BusyBox v1.6.0 (2010-05-13 17:50:10 EDT) multi-call binary
- starting pid 688, tty '': '/etc/init.d/rcS'
- /etc/init.d/rcS: line 5: cannot create /proc/sys/net/ipv4/ip_no_pmtu_disc: nonexistent directory
- Detecting Hardware ...
- Installing ether-pow driver - 0x6008
- starting pid 862, tty '/dev/ttyS0': '/usr/bin/gettyOrMwar'
- Setting up ZVM
- Exporting LD_LIBRARY_PATH
- Decompressing...
- Validating...... OK
- Cryptographic library self-test....passed!
- XML config selected
- Validating XML configuration
- octeon_device_init: found 1 DPs
- /dev/fpga: No such device or address
- readCPUConfigData: cardid 0x6060001
- Cisco is a trademark of Cisco Systems, Inc.
- Software Copyright Cisco Systems, Inc. All rights reserved.
- Cisco AireOS Version 8.0.152.0
- Firmware Version PIC 20.0
- Initializing OS Services: ok
- Initializing Serial Services: ok
- Initializing Network Services: ok
- Initializing Licensing Services: ok
- License daemon start initialization.....
- License daemon running.....
- Starting Statistics Service: ok
- Starting Licensing Services: ok
- Starting ARP Services: ok
- Starting Trap Manager: ok
- Starting Network Interface Management Services: ok
- Starting System Services: ok
- Starting FIPS Features: ok : Not enabled
- Starting Fastpath Hardware Acceleration: ok
- Starting Fastpath Console redirect : ok
- Starting Fastpath DP Heartbeat : ok
- Fastpath CPU0.00: Starting Fastpath Application. SDK-1.8.0, build 269. Flags-[DUTY CYCLE] : ok
- Fastpath CPU0.00: Initializing last packet received queue. Num of cores(2)
- Fastpath CPU0.00: Init MBUF size: 1856, Subsequent MBUF size: 2040
- Fastpath CPU0.00: Core 0 Initialization: ok
- Fastpath CPU0.00: Initializing Timer...
- Fastpath CPU0.00: Initializing Timer...done.
- Fastpath CPU0.00: Initializing Timer...
- Fastpath CPU0.00: Initializing NBAR AGING Timer...done.
- Fastpath CPU0.01: Core 1 Initialization: ok
- Starting Switching Services: ok
- Starting QoS Services: ok
- Starting Policy Manager: ok
- Starting Data Transport Link Layer: ok
- Starting Access Control List Services: ok
- Starting System Interfaces: ok
- Starting Client Troubleshooting Service: ok
- Starting Certificate Database: ok
- Starting VPN Services: ok
- Starting Management Frame Protection: ok
- Starting DNS Services: ok
- Starting Redundancy: ok
- Starting LWAPP: ok
- Starting CAPWAP: ok
- Starting LOCP: ok
- Starting Security Services: ok
- Starting Policy Manager: ok
- Starting Authentication Engine: ok
- Starting Mobility Management: ok
- Starting Capwap Ping Component: ok
- Starting AVC Services: ok
- Starting Virtual AP Services: ok
- Starting AireWave Director: ok
- Starting Network Time Services: ok
- Starting Cisco Discovery Protocol: ok
- Starting Broadcast Services: ok
- Starting Logging Services: ok
- Starting DHCP Server: ok
- Starting IDS Signature Manager: ok
- Starting RFID Tag Tracking: ok
- Starting RF Profiles: ok
- Starting Power Supply and Fan Status Monitoring Service: ok
- Starting Mesh Services: ok
- Starting TSM: ok
- Starting CIDS Services: ok
- Starting Ethernet-over-IP: ok
- Starting DTLS server: enabled in CAPWAP
- Starting CleanAir: ok
- Starting WIPS: ok
- Starting SSHPM LSC PROV LIST: ok
- Starting RRC Services: ok
- Starting SXP Services: ok
- Starting Alarm Services: ok
- Starting FMC HS: ok
- Starting IPv6 Services: ok
- Starting Config Sync Manager : ok
- Starting Hotspot Services: ok
- Starting Portal Server Services: ok
- Starting mDNS Services: ok
- Starting Management Services:
- Web Server: CLI: Secure Web: ok
- (Cisco Controller)
- Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)
- User:
- User:admin
- Password:*******
- (Cisco Controller) >
- (Cisco Controller) >
- (Cisco Controller) >show inventory
- Burned-in MAC Address............................ 00:A2:89:B9:A1:20
- Maximum number of APs supported.................. 75
- NAME: "Chassis" , DESCR: "Cisco 2500 Series Wireless LAN Controller"
- PID: AIR-CT2504-K9, VID: V07, SN: PSZ20341GD8
- (Cisco Controller) >s
- Incorrect usage. Use the '?' or <TAB> key to list commands.
- (Cisco Controller) >show run?
- run-config running-config
- (Cisco Controller) >show run-config
- Press Enter to continue...
- System Inventory
- NAME: "Chassis" , DESCR: "Cisco 2500 Series Wireless LAN Controller"
- PID: AIR-CT2504-K9, VID: V07, SN: PSZ20341GD8
- Burned-in MAC Address............................ 00:A2:89:B9:A1:20
- Maximum number of APs supported.................. 75
- Press Enter to continue or <ctrl-z> to abort
- (Cisco Controller) >erase con
- Incorrect usage. Use the '?' or <TAB> key to list commands.
- (Cisco Controller) >?
- clear Clear selected configuration elements.
- config Configure switch options and settings.
- cping Send capwap echo packets to a specified mobility peer IP address.
- debug Manages system debug options.
- eping Send Ethernet-over-IP echo packets to a specified mobility peer IP address.
- grep Print lines matching a pattern.
- help Help
- license Manage Software License
- linktest Perform a link test to a specified MAC address.
- logout Exit this session. Any unsaved changes are lost.
- mping Send Mobility echo packets to a specified mobility peer IP address.
- ping Send ICMP echo packets to a specified IP address.
- reset Reset options.
- save Save switch configurations.
- show Display switch options and settings.
- test Test trigger commands
- transfer Transfer a file to or from the switch.
- (Cisco Controller) >
- (Cisco Controller) >clear config
- Are you sure you want to clear the configuration? (y/n) y
- Writing to flash ...done
- Configuration Cleared!
- (Cisco Controller) >reset system
- The system has unsaved changes.
- Would you like to save them now? (y/N) m
- Configuration Not Saved!
- Are you sure you would like to reset the system? (y/N) y
- System will now restart! Restarting system.
- WLCNG Boot Loader Version 1.0.20 (Built on Jan 9 2014 at 19:02:44 by cisco)
- Board Revision 0.0 (SN: PSZ20341GD8, Type: AIR-CT2504-K9) (P)
- Verifying boot loader integrity... OK.
- OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz data rate)
- CPU Cores: 4
- DRAM: 1024 MB
- Flash: 32 MB
- Clearing DRAM........ done
- Network: octeth0', octeth1, octeth2, octeth3
- ' - Active interface
- E - Environment MAC address override
- CF Bus 0 (IDE): OK
- IDE device 0:
- - Model: 1GB CompactFlash Card Firm: CF B61FK Ser#: C141100294A10q3G8TVS
- - Type: Hard Disk
- - Capacity: 977.4 MB = 0.9 GB (2001888 x 512)
- Press <ESC> now to access the Boot Menu...
- Loading primary image (8.0.152.0)
- 100%
- 38323276 bytes read
- Launching...
- Launching images...
- init started: BusyBox v1.6.0 (2010-05-13 17:50:10 EDT) multi-call binary
- starting pid 688, tty '': '/etc/init.d/rcS'
- /etc/init.d/rcS: line 5: cannot create /proc/sys/net/ipv4/ip_no_pmtu_disc: nonexistent directory
- Detecting Hardware ...
- Installing ether-pow driver - 0x6008
- starting pid 862, tty '/dev/ttyS0': '/usr/bin/gettyOrMwar'
- Setting up ZVM
- Exporting LD_LIBRARY_PATH
- Decompressing...
- Validating...... OK
- Cryptographic library self-test....passed!
- XML config selected
- Validating XML configuration
- octeon_device_init: found 1 DPs
- /dev/fpga: No such device or address
- readCPUConfigData: cardid 0x6060001
- Cisco is a trademark of Cisco Systems, Inc.
- Software Copyright Cisco Systems, Inc. All rights reserved.
- Cisco AireOS Version 8.0.152.0
- Firmware Version PIC 20.0
- Initializing OS Services: ok
- Initializing Serial Services: ok
- Initializing Network Services: ok
- Initializing Licensing Services: ok
- License daemon start initialization.....
- License daemon running.....
- Starting Statistics Service: ok
- Starting Licensing Services: ok
- Starting ARP Services: ok
- Starting Trap Manager: ok
- Starting Network Interface Management Services: ok
- Starting System Services: ok
- Starting FIPS Features: ok : Not enabled
- Starting Fastpath Hardware Acceleration: ok
- Starting Fastpath Console redirect : ok
- Starting Fastpath DP Heartbeat : ok
- Fastpath CPU0.00: Starting Fastpath Application. SDK-1.8.0, build 269. Flags-[DUTY CYCLE] : ok
- Fastpath CPU0.00: Initializing last packet received queue. Num of cores(2)
- Fastpath CPU0.00: Init MBUF size: 1856, Subsequent MBUF size: 2040
- Fastpath CPU0.00: Core 0 Initialization: ok
- Fastpath CPU0.00: Initializing Timer...
- Fastpath CPU0.00: Initializing Timer...done.
- Fastpath CPU0.00: Initializing Timer...
- Fastpath CPU0.00: Initializing NBAR AGING Timer...done.
- Fastpath CPU0.01: Core 1 Initialization: ok
- Starting Switching Services: ok
- Starting QoS Services: ok
- Starting Policy Manager: ok
- Starting Data Transport Link Layer: ok
- Starting Access Control List Services: ok
- Starting System Interfaces: ok
- Starting Client Troubleshooting Service: ok
- Starting Certificate Database: ok
- Starting VPN Services: ok
- Starting Management Frame Protection: ok
- Starting DNS Services: ok
- Starting Redundancy: ok
- Starting LWAPP: ok
- Starting CAPWAP: ok
- Starting LOCP: ok
- Starting Security Services: ok
- Starting Policy Manager: ok
- Starting Authentication Engine: ok
- Starting Mobility Management: ok
- Starting Capwap Ping Component: ok
- Starting AVC Services: ok
- Starting Virtual AP Services: ok
- Starting AireWave Director: ok
- Starting Network Time Services: ok
- Starting Cisco Discovery Protocol: ok
- Starting Broadcast Services: ok
- Starting Logging Services: ok
- Starting DHCP Server: ok
- Starting IDS Signature Manager: ok
- Starting RFID Tag Tracking: ok
- Starting RF Profiles: ok
- Starting Power Supply and Fan Status Monitoring Service: ok
- Starting Mesh Services: ok
- Starting TSM: ok
- Starting CIDS Services: ok
- Starting Ethernet-over-IP: ok
- Starting DTLS server: enabled in CAPWAP
- Starting CleanAir: ok
- Starting WIPS: ok
- Starting SSHPM LSC PROV LIST: ok
- Starting RRC Services: ok
- Starting SXP Services: ok
- Starting Alarm Services: ok
- Starting FMC HS: ok
- Starting IPv6 Services: ok
- Starting Config Sync Manager : ok
- Starting Hotspot Services: ok
- Starting Portal Server Services: ok
- Starting mDNS Services: ok
- Starting Management Services:
- Web Server: CLI: Secure Web: Web Authentication Certificate not found (error). If you cannot access management interface via HTTPS please reconfigure Virtual Interface.
- Enabling Controller Provisioning
- Configuring management interface
- Starting Internal DHCP server
- dhcp pool 192.168.1.3(0xc0a80103) - 192.168.1.14(0xc0a8010e), network 192.168.1.0(0xc0a80100) netmask 255.255.255.240(0xfffffff0), default gateway 192.168.1.1
- Enabling mgmt via wireless
- Enabling Provisioning SSID
- SSID: CiscoAirProvision, Admin Status: 1, Interface Name: management, 802.11 Auth: WPA2-PSK, Wi-Fi Protected Access : Enabled
- (Cisco Controller)
- Welcome to the Cisco Wizard Configuration Tool
- Use the '-' character to backup
- Would you like to terminate autoinstall? [yes]:
- AUTO-INSTALL: starting now...
- AUTO-INSTALL: interface 'auto-install' - setting DHCP siaddr ==> 192.168.60.1
- AUTO-INSTALL: interface 'auto-install' - setting DHCP yiaddr ==> 192.168.60.157
- AUTO-INSTALL: interface 'auto-install' - setting DHCP Netmask ==> 255.255.255.0
- AUTO-INSTALL: interface 'auto-install' - setting DHCP Gateway ==> 192.168.60.1
- AUTO-INSTALL: interface 'auto-install' registered
- AUTO-INSTALL: iteration 1 -- interface 'auto-install'
- AUTO-INSTALL: hostname could not be resolved for local IP Address 192.168.60.157
- AUTO-INSTALL: TFTP server 192.168.60.1 (from DHCP siaddr)
- AUTO-INSTALL: attempting download of '00a2.89b9.a120-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'PSZ20341GD8-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'ciscowlc-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'ciscowlc.cfg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: iteration 2 -- interface 'auto-install'
- AUTO-INSTALL: hostname could not be resolved for local IP Address 192.168.60.157
- AUTO-INSTALL: TFTP server 192.168.60.1 (from DHCP siaddr)
- AUTO-INSTALL: attempting download of '00a2.89b9.a120-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'PSZ20341GD8-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'ciscowlc-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'ciscowlc.cfg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: iteration 3 -- interface 'auto-install'
- AUTO-INSTALL: hostname could not be resolved for local IP Address 192.168.60.157
- AUTO-INSTALL: TFTP server 192.168.60.1 (from DHCP siaddr)
- AUTO-INSTALL: attempting download of '00a2.89b9.a120-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'PSZ20341GD8-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'ciscowlc-confg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: attempting download of 'ciscowlc.cfg'
- AUTO-INSTALL: TFTP status - 'TFTP Config transfer starting.'
- AUTO-INSTALL: TFTP status - '% Error: Config file transfer failed - No reply from the TFTP server'
- AUTO-INSTALL: process terminated -- no configuration loaded
- System Name [Cisco_b9:a1:25] (31 characters max):
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement