Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Mitsubishi EVO X Coils.
- 2015-10-29 15:21:39 ★ Richard Hawkins walks over to the Mitsubishi as he then reaches out for the door handle with his right hand
- 2015-10-29 15:21:48 ★ and pulls open the driverside door. ((Richard Hawkins))
- 2015-10-29 15:22:16 ★ Richard Hawkins would then bend down a little as he reaches out for the lever to pop open the hood.
- 2015-10-29 15:22:40 ★ Richard Hawkins would then stand back up and shuts the door as he then walks over to the front of the car
- 2015-10-29 15:23:09 ★ and slides his fingers under the hood and flicks the lever and opens the hood completely by ((Richard Hawkins))
- 2015-10-29 15:23:13 ★ lifting it up. ((Richard Hawkins))
- 2015-10-29 15:23:54 ★ Richard Hawkins would then walk over to the toolstation as he then bends down and picks up a toolbox
- 2015-10-29 15:24:02 ★ with his right hand. ((Richard Hawkins))
- 2015-10-29 15:24:18 ★ Richard Hawkins would then stand back up as he then starts to walk towards the mitsubishi.
- 2015-10-29 15:26:02 ★ Richard Hawkins would then place the toolbox down as he then walks to the back side of the elevator.
- 2015-10-29 15:26:28 ★ Richard Hawkins would then bend down and pick up four plastic pads , as he then laces one of each
- 2015-10-29 15:27:03 ★ to all four en of the sideskirts, reventing the lift to have a direct contact with car. ((Richard Hawkins))
- 2015-10-29 15:27:26 ★ Richard Hawkins would then walk over to the control panel of the lift as he then raises the car a little bit
- 2015-10-29 15:27:50 ★ and then raises the middle bit of the lift , to get all four wheels off the ground. ((Richard Hawkins))
- 2015-10-29 15:28:37 ★ after all four wheels would be off the gound, he would then walk over to the toolbox ((Richard Hawkins))
- 2015-10-29 15:28:45 ★ as he bends down and opens it. ((Richard Hawkins))
- 2015-10-29 15:29:03 ★ Richard Hawkins would then reach for the breaker bar and the 19mm socket for it.
- 2015-10-29 15:29:30 ★ Richard Hawkins would connect the two as he then uses the breaker bar to undo all four bolts on the car.
- 2015-10-29 15:30:02 ★ Richard Hawkins would then place the bolts into his pocket and places the breaker bar onto the side of the
- 2015-10-29 15:30:10 ★ elevator. ((Richard Hawkins))
- 2015-10-29 15:31:16 ★ Richard Hawkins would then grab the rim with both of his hands and lifts it away from the wheel hub
- 2015-10-29 15:31:24 ★ and places it onto the ground ((Richard Hawkins))
- 2015-10-29 15:32:45 ★ Richard Hawkins would then pick up the breaker bar as he the detatches the 19mm socket and throws it back
- 2015-10-29 15:32:50 ★ into the toolbox. ((Richard Hawkins))
- 2015-10-29 15:33:26 ★ Richard Hawkins would then bend down and reaches for the 17mm socket with his right hadn, he would then
- 2015-10-29 15:33:46 ★ attatch the socket to the breaker bar. ((Richard Hawkins))
- 2015-10-29 15:35:04 ★ Richard Hawkins would then use the breaker bar to loosen uo the bolts cnnecting the coilover to the
- 2015-10-29 15:35:09 ★ front steering knuckle. ((Richard Hawkins))
- 2015-10-29 15:35:50 ★ Richard Hawkins would then detatch the 17mm socket from the breaker bar and places the breaker bar
- 2015-10-29 15:36:15 ★ down onto the lift. ((Richard Hawkins))
- 2015-10-29 15:36:49 ★ Richard Hawkins would then bend down to the toolbox as he reaches for the socket wrench and stands back up.
- 2015-10-29 15:37:06 ★ Richard Hawkins would then connect the 17mm socket to the socket wrench as he then use it to
- 2015-10-29 15:37:31 ★ undo the bolts connecting the coilover to the steering knuckle. ((Richard Hawkins))
- 2015-10-29 15:38:10 ★ Richard Hawkins would then place the nuts and bolts into hsi pocket as he then uses the socket wrench
- 2015-10-29 15:38:27 ★ undo the 3 nuts holding the colover in place in engine bay. ((Richard Hawkins))
- 2015-10-29 15:38:56 ★ Richard Hawkins would then crouch back down to the wheel hub as he then pushes the steering knuckle
- 2015-10-29 15:39:05 ★ down to release the coilover, ((Richard Hawkins))
- 2015-10-29 15:39:53 ★ Richard Hawkins would then place the coilover onto the ground next to the toolbox and inspects it.
- 2015-10-29 15:40:27 ★ Richard Hawkins would then walk over to the wall of the garage as he picks up a box which has the new
- 2015-10-29 15:40:33 ★ coilovers in it. ((Richard Hawkins))
- 2015-10-29 15:40:46 ★ Richard Hawkins would then use one of his keys to open the box.
- 2015-10-29 15:41:30 ★ Richard Hawkins would then reach for the coilover as he then slides it into the slots in wheel hub.
- 2015-10-29 15:42:08 ★ Richard Hawkins rests the coilover onto the steering knuckle as he then stands up to tighten the 3 nuts
- 2015-10-29 15:42:26 ★ holding the coilover in place from the engine bay. ((Richard Hawkins))
- 2015-10-29 15:43:00 ★ Richard Hawkins would then crouch back down as he then pushes the front steering knuckle down to slide the
- 2015-10-29 15:43:07 ★ coilovers in place. ((Richard Hawkins))
- 2015-10-29 15:43:25 ★ Richard Hawkins would then slide in the long bolts connecting the coilover to the steering knuckle
- 2015-10-29 15:45:21 ★ Richard Hawkins would then tighten the nuts and bolts as he then inspects it and then lowers it to the
- 2015-10-29 15:45:25 ★ lowest setting. ((Richard Hawkins))
- 2015-10-29 15:46:05 ★ Richard Hawkins would then bend down to the ground as he then grabs the rim with both of his hands and lifts
- 2015-10-29 15:46:30 ★ it back onto the wheelhub. ((Richard Hawkins))
- 2015-10-29 15:46:54 ★ Richard Hawkins would then screw on couple of bolts to hold the rim in place.
- 2015-10-29 15:47:14 ★ Richard Hawkins would then bend down as he then reaches for the torque bar and 19mm socket
- 2015-10-29 15:47:40 ★ Richard Hawkins would connect the two and use it to tighten the nuts to about 130NM of torque
- 2015-10-29 15:48:09 ★ Richard Hawkins would repeat the same action on all four sides of the car until all the coilovers are change
- 2015-10-29 15:48:12 ★ d. ((Richard Hawkins))
- 2015-10-29 15:48:32 ★ Richard Hawkins would then gather all his tools and places them into his toolbox.
- 2015-10-29 15:48:53 ★ Richard Hawkins would then bend down and picks up the toolbox as he then takes it to the toolstation of the
- 2015-10-29 15:48:56 ★ garage. ((Richard Hawkins))
- 2015-10-29 15:49:16 ★ Richard Hawkins would then walk back to the Mitsubishi and lowers the lifts.
- 2015-10-29 15:49:37 ★ Richard Hawkins would then collect all the plastic pads and places them back where they belong.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement