Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2017 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 12.0-CURRENT #0 r326378: Thu Nov 30 02:09:51 UTC 2017
- root@releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
- FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn)
- WARNING: WITNESS option enabled, expect reduced performance.
- VT(efifb): resolution 640x480
- CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (2904.12-MHz K8-class CPU)
- Origin="GenuineIntel" Id=0x806e9 Family=0x6 Model=0x8e Stepping=9
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
- AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
- AMD Features2=0x121<LAHF,ABM,Prefetch>
- Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
- XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
- VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
- TSC: P-state invariant, performance statistics
- real memory = 8589934592 (8192 MB)
- avail memory = 8123564032 (7747 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <LENOVO TP-R0D >
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
- random: unblocking device.
- ioapic0 <Version 2.0> irqs 0-119 on motherboard
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #3 Launched!
- SMP: AP CPU #2 Launched!
- Timecounter "TSC-low" frequency 1452061805 Hz quality 1000
- random: entropy device external interface
- netmap: loaded module
- [ath_hal] loaded
- module_register_init: MOD_LOAD (vesa, 0xffffffff80f8cc00, 0) error 19
- random: registering fast source Intel Secure Key RNG
- random: fast provider: "Intel Secure Key RNG"
- kbd1 at kbdmux0
- nexus0
- cryptosoft0: <software crypto> on motherboard
- acpi0: <LENOVO TP-R0D> on motherboard
- acpi_ec0: <Embedded Controller: GPE 0x20, ECDT> port 0x62,0x66 on acpi0
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 24000000 Hz quality 950
- Event timer "HPET" frequency 24000000 Hz quality 550
- Event timer "HPET1" frequency 24000000 Hz quality 440
- Event timer "HPET2" frequency 24000000 Hz quality 440
- Event timer "HPET3" frequency 24000000 Hz quality 440
- Event timer "HPET4" frequency 24000000 Hz quality 440
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- atrtc0: registered as a time-of-day clock, resolution 1.000000s
- Event timer "RTC" frequency 32768 Hz quality 0
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
- acpi_lid0: <Control Method Lid Switch> on acpi0
- acpi_button0: <Sleep Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
- vgapci0: Boot video device
- xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xf4400000-0xf440ffff at device 20.0 on pci0
- xhci0: 32 bytes context size, 64-bit DMA
- usbus0 on xhci0
- usbus0: 5.0Gbps Super Speed USB v3.0
- pci0: <simple comms> at device 22.0 (no driver attached)
- ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xf4428000-0xf4429fff,0xf442e000-0xf442e0ff,0xf442c000-0xf442c7ff at device 23.0 on pci0
- ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf3000000-0xf3ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 on pci1
- pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0
- pci2: <ACPI PCI bus> on pcib2
- sdhci_pci0: <Generic SD HCI> mem 0xf4301000-0xf4301fff,0xf4300000-0xf43007ff at device 0.0 on pci2
- sdhci_pci0: 1 slot(s) allocated
- pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0
- pcib3: [GIANT-LOCKED]
- pcib4: <ACPI PCI-PCI bridge> at device 29.2 on pci0
- pci3: <ACPI PCI bus> on pcib4
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf4204000-0xf4204fff,0xf4200000-0xf4203fff at device 0.0 on pci3
- re0: Using 1 MSI-X message
- re0: turning off MSI enable bit.
- re0: ASPM disabled
- re0: Chip rev. 0x50800000
- re0: MAC rev. 0x00100000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Using defaults for TSO: 65518/35/2048
- re0: Ethernet address: c8:5b:76:dc:ea:1c
- re0: netmap queues/slots: TX 1/256, RX 1/256
- pcib5: <ACPI PCI-PCI bridge> at device 29.3 on pci0
- pci4: <ACPI PCI bus> on pcib5
- pci4: <network> at device 0.0 (no driver attached)
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- pci0: <memory> at device 31.2 (no driver attached)
- hdac0: <Intel Kabylake-LP HDA Controller> mem 0xf4420000-0xf4423fff,0xf4410000-0xf441ffff at device 31.3 on pci0
- acpi_tz0: <Thermal Zone> on acpi0
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- psm0: <PS/2 Mouse> irq 12 on atkbdc0
- psm0: [GIANT-LOCKED]
- psm0: model Generic PS/2 mouse, device ID 0
- battery0: <ACPI Control Method Battery> on acpi0
- acpi_acad0: <AC Adapter> on acpi0
- orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- Timecounters tick every 1.000 msec
- hdacc0: <Conexant CX20753/4 HDA CODEC> at cad 0 on hdac0
- hdaa0: <Conexant CX20753/4 Audio Function Group> at nid 1 on hdacc0
- pcm0: <Conexant CX20753/4 (Analog)> at nid 23 and 26 on hdaa0
- pcm1: <Conexant CX20753/4 (Right Analog)> at nid 22 and 25 on hdaa0
- hdacc1: <Intel Kabylake HDA CODEC> at cad 2 on hdac0
- hdaa1: <Intel Kabylake Audio Function Group> at nid 1 on hdacc1
- pcm2: <Intel Kabylake (HDMI/DP 8ch)> at nid 3 on hdaa1
- ugen0.1: <0x8086 XHCI root HUB> at usbus0
- uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <WDC WD10JPVX-08JC3T6 08.01A08> ACS-2 ATA SATA 3.x device
- ada0: Serial Number WD-WXA1AC65H2Z7
- ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 953869MB (1953525168 512 byte sectors)
- WARNING: WITNESS option enabled, expect reduced performance.
- Trying to mount root from zfs:zroot/ROOT/default []...
- Root mount waiting for: usbus0
- acpi_ec0: EcCommand: no response to 0x84
- uhub0: 18 ports with 18 removable, self powered
- Root mount waiting for: usbus0
- acpi_ec0: EcCommand: no response to 0x84
- acpi_ec0: GPE query failed: AE_NO_HARDWARE_RESPONSE
- ugen0.2: <Ralink 802.11 n WLAN> at usbus0
- Root mount waiting for: usbus0
- ugen0.3: <General USB Flash Disk> at usbus0
- umass0 on uhub0
- umass0: <General USB Flash Disk, class 0/0, rev 2.00/11.00, addr 2> on usbus0
- umass0: SCSI over Bulk-Only; quirks = 0x4000
- umass0:1:0: Attached to scbus1
- da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
- da0: <General USB Flash Disk 1100> Removable Direct Access SPC-2 SCSI device
- da0: Serial Number 04EQ5YCD4D1IK1L9
- da0: 40.000MB/s transfers
- da0: 7680MB (15728640 512 byte sectors)
- da0: quirks=0x2<NO_6_BYTE>
- ugen0.4: <vendor 0x0cf3 product 0xe500> at usbus0
- Root mount waiting for: usbus0
- ugen0.5: <8SSC20F27029L1GZ71A06Y3 Integrated Camera> at usbus0
- info: [drm] Initialized drm 1.1.0 20060810
- re0: link state changed to DOWN
- run0 on uhub0
- run0: <1.0> on usbus0
- run0: MAC/BBP RT2872 (rev 0x0202), RF RT2820 (MIMO 2T2R), address 80:1f:02:3b:52:8d
- ubt0 on uhub0
- ubt0: <vendor 0x0cf3 product 0xe500, class 224/1, rev 2.01/0.01, addr 3> on usbus0
- wlan0: Ethernet address: 80:1f:02:3b:52:8d
- WARNING: attempt to domain_add(bluetooth) after domainfinalize()
- WARNING: attempt to domain_add(netgraph) after domainfinalize()
- run0: firmware RT2870 ver. 0.33 loaded
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement