API tools faq
paste
Advertisement
Guest User

After UpdateBootloader

a guest
Apr 11th, 2022
61
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.66 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.04.11 13:16:02 =~=~=~=~=~=~=~=~=~=~=~=
  2.  
  3. U-Boot SPL 2021.10-armbian (Feb 27 2022 - 08:51:38 +0000)
  4. DRAM: 2048 MiB
  5. Trying to boot from MMC1
  6.  
  7. /***** Edited note: it got stuck at this point for some reason, and I
  8. powered off and on again, getting the more familiar noise below. *****/
  9.  
  10.  
  11. U-Boot SPL 2021.10-armbian (Feb 27 2022 - 08:51:38 +0000)
  12. DRAM: 1024 MiB
  13. Trying to boot from MMC1
  14. NOTICE: BL31: v2.2(debug):a04808c1-dirty
  15. NOTICE: BL31: Built : 08:51:29, Feb 27 2022
  16. NOTICE: BL31: Detected Allwinner H6 SoC (1728)
  17. NOTICE: BL31: Found U-Boot DTB at 0xc086c68, model: OrangePi One Plus
  18. INFO: ARM GICv2 driver initialized
  19. NOTICE: PMIC: Probing AXP805
  20. NOTICE: PMIC: AXP805 detected
  21. INFO: BL31: Platform setup done
  22. INFO: BL31: Initializing runtime services
  23. INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
  24. INFO: BL31: Preparing for EL3 exit to normal world
  25. INFO: Entry point address = 0x4a000000
  26. INFO: SPSR = 0x3c9
  27.  
  28.  
  29. U-Boot 2021.10-armbian (Feb 27 2022 - 08:51:38 +0000) Allwinner Technology
  30.  
  31. CPU: Allwinner H6 (SUN50I)
  32. Model: OrangePi One Plus
  33. DRAM: 1 GiB
  34. MMC: mmc@4020000: 0
  35. Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000
  36. Out: serial@5000000
  37. Err: serial@5000000
  38. Net: No ethernet found.
  39. starting USB...
  40. Bus usb@5101000: USB EHCI 1.00
  41. Bus usb@5101400: USB OHCI 1.0
  42. Bus usb@5311000: USB EHCI 1.00
  43. Bus usb@5311400: USB OHCI 1.0
  44. scanning bus usb@5101000 for devices... 1 USB Device(s) found
  45. scanning bus usb@5101400 for devices... 1 USB Device(s) found
  46. scanning bus usb@5311000 for devices... 1 USB Device(s) found
  47. scanning bus usb@5311400 for devices... 1 USB Device(s) found
  48. scanning usb for storage devices... 0 Storage Device(s) found
  49. Autoboot in 1 seconds, press <Space> to stop
  50. switch to partitions #0, OK
  51. mmc0 is current device
  52. Scanning mmc 0:1...
  53. Found U-Boot script /boot/boot.scr
  54. 3202 bytes read in 3 ms (1 MiB/s)
  55. ## Executing script at 4fc00000
  56. U-boot loaded from SD
  57. Boot script loaded from mmc
  58. 203 bytes read in 3 ms (65.4 KiB/s)
  59. 35349 bytes read in 9 ms (3.7 MiB/s)
  60. 4191 bytes read in 8 ms (510.7 KiB/s)
  61. Applying kernel provided DT fixup script (sun50i-h6-fixup.scr)
  62. ## Executing script at 45000000
  63. 16057027 bytes read in 796 ms (19.2 MiB/s)
  64. 21735432 bytes read in 1077 ms (19.2 MiB/s)
  65. Moving Image from 0x40080000 to 0x40200000, end=41710000
  66. ## Loading init Ramdisk from Legacy Image at 4ff00000 ...
  67. Image Name: uInitrd
  68. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  69. Data Size: 16056963 Bytes = 15.3 MiB
  70. Load Address: 00000000
  71. Entry Point: 00000000
  72. Verifying Checksum ... OK
  73. ## Flattened Device Tree blob at 4fa00000
  74. Booting using the fdt blob at 0x4fa00000
  75. Loading Ramdisk to 490af000, end 49fff283 ... OK
  76. Loading Device Tree to 000000004903e000, end 00000000490aefff ... OK
  77.  
  78. Starting kernel ...
  79.  
  80. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  81. [ 0.000000] Linux version 5.15.25-sunxi64 (root@be0d054872f0) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #22.02.1 SMP Sun Feb 27 09:24:04 UTC 2022
  82. [ 0.000000] Machine model: OrangePi One Plus
  83. [ 0.000000] NUMA: No NUMA configuration found
  84. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
  85. [ 0.000000] NUMA: NODE_DATA [mem 0x7fdce100-0x7fdcffff]
  86. [ 0.000000] Zone ranges:
  87. [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
  88. [ 0.000000] DMA32 empty
  89. [ 0.000000] Normal empty
  90. [ 0.000000] Movable zone start for each node
  91. [ 0.000000] Early memory node ranges
  92. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
  93. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
  94. [ 0.000000] cma: Reserved 128 MiB at 0x0000000076c00000
  95. [ 0.000000] psci: probing for conduit method from DT.
  96. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  97. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  98. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  99. [ 0.000000] psci: SMC Calling Convention v1.1
  100. [ 0.000000] percpu: Embedded 19 pages/cpu s36952 r8192 d32680 u77824
  101. [ 0.000000] Detected VIPT I-cache on CPU0
  102. [ 0.000000] CPU features: detected: ARM erratum 845719
  103. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  104. [ 0.000000] Policy zone: DMA
  105. [ 0.000000] Kernel command line: root=UUID=f3ac882e-1afb-4743-a26d-d9f18fd90a69 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=7 ubootpart=05d56c7c-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=memory swapaccount=1
  106. [ 0.000000] Unknown kernel command line parameters "ubootpart=05d56c7c-01 cgroup_enable=memory", will be passed to user space.
  107. [ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
  108. [ 0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
  109. [ 0.000000] printk: log_buf_len min size: 16384 bytes
  110. [ 0.000000] printk: log_buf_len: 32768 bytes
  111. [ 0.000000] printk: early log buf free: 14168(86%)
  112. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  113. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  114. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  115. [ 0.000000] Memory: 859592K/1048576K available (13440K kernel code, 1066K rwdata, 4128K rodata, 2496K init, 316K bss, 57912K reserved, 131072K cma-reserved)
  116. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  117. [ 0.000000] rcu: Hierarchical RCU implementation.
  118. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  119. [ 0.000000] Tracing variant of Tasks RCU enabled.
  120. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  121. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  122. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  123. [ 0.000000] Root IRQ handler: gic_handle_irq
  124. [ 0.000000] GIC: Using split EOI/Deactivate mode
  125. [ 0.000000] random: get_random_bytes called from start_kernel+0x4cc/0x6ac with crng_init=0
  126. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  127. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  128. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  129. [ 0.000122] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  130. [ 0.000580] Console: colour dummy device 80x25
  131. [ 0.001014] printk: console [tty1] enabled
  132. [ 0.001102] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  133. [ 0.001131] pid_max: default: 32768 minimum: 301
  134. [ 0.001218] LSM: Security Framework initializing
  135. [ 0.001257] Yama: becoming mindful.
  136. [ 0.001346] AppArmor: AppArmor initialized
  137. [ 0.001402] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  138. [ 0.001428] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  139. [ 0.003059] rcu: Hierarchical SRCU implementation.
  140. [ 0.004098] smp: Bringing up secondary CPUs ...
  141. [ 0.004835] Detected VIPT I-cache on CPU1
  142. [ 0.004907] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  143. [ 0.005533] Detected VIPT I-cache on CPU2
  144. [ 0.005574] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  145. [ 0.006134] Detected VIPT I-cache on CPU3
  146. [ 0.006171] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  147. [ 0.006245] smp: Brought up 1 node, 4 CPUs
  148. [ 0.006312] SMP: Total of 4 processors activated.
  149. [ 0.006325] CPU features: detected: 32-bit EL0 Support
  150. [ 0.006337] CPU features: detected: CRC32 instructions
  151. [ 0.019090] CPU: All CPU(s) started at EL2
  152. [ 0.019130] alternatives: patching kernel code
  153. [ 0.020560] devtmpfs: initialized
  154. [ 0.027027] Registered cp15_barrier emulation handler
  155. [ 0.027071] Registered setend emulation handler
  156. [ 0.027254] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  157. [ 0.027287] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  158. [ 0.033234] pinctrl core: initialized pinctrl subsystem
  159. [ 0.034423] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  160. [ 0.036005] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  161. [ 0.036151] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  162. [ 0.036292] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  163. [ 0.036397] audit: initializing netlink subsys (disabled)
  164. [ 0.036582] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
  165. [ 0.037103] thermal_sys: Registered thermal governor 'fair_share'
  166. [ 0.037109] thermal_sys: Registered thermal governor 'bang_bang'
  167. [ 0.037125] thermal_sys: Registered thermal governor 'step_wise'
  168. [ 0.037138] thermal_sys: Registered thermal governor 'user_space'
  169. [ 0.037585] cpuidle: using governor menu
  170. [ 0.037847] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  171. [ 0.037951] ASID allocator initialised with 65536 entries
  172. [ 0.038124] Serial: AMBA PL011 UART driver
  173. [ 0.048615] platform 6510000.tcon-top: Fixing up cyclic dependency with 6000000.hdmi
  174. [ 0.048980] platform 6515000.lcd-controller: Fixing up cyclic dependency with 6510000.tcon-top
  175. [ 0.050078] platform 7022000.pinctrl: Fixing up cyclic dependency with pmic@745 (7083000.rsb)
  176. [ 0.050909] platform connector: Fixing up cyclic dependency with 6000000.hdmi
  177. [ 0.058497] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  178. [ 0.058534] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  179. [ 0.058550] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  180. [ 0.058566] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  181. [ 0.060342] cryptd: max_cpu_qlen set to 1000
  182. [ 0.128204] raid6: neonx8 gen() 1587 MB/s
  183. [ 0.196273] raid6: neonx8 xor() 1186 MB/s
  184. [ 0.264344] raid6: neonx4 gen() 1622 MB/s
  185. [ 0.332414] raid6: neonx4 xor() 1177 MB/s
  186. [ 0.400483] raid6: neonx2 gen() 1535 MB/s
  187. [ 0.468561] raid6: neonx2 xor() 1074 MB/s
  188. [ 0.536632] raid6: neonx1 gen() 1338 MB/s
  189. [ 0.604705] raid6: neonx1 xor() 923 MB/s
  190. [ 0.672787] raid6: int64x8 gen() 1103 MB/s
  191. [ 0.740858] raid6: int64x8 xor() 580 MB/s
  192. [ 0.808914] raid6: int64x4 gen() 1226 MB/s
  193. [ 0.877005] raid6: int64x4 xor() 628 MB/s
  194. [ 0.945079] raid6: int64x2 gen() 1048 MB/s
  195. [ 1.013156] raid6: int64x2 xor() 555 MB/s
  196. [ 1.081236] raid6: int64x1 gen() 778 MB/s
  197. [ 1.149331] raid6: int64x1 xor() 406 MB/s
  198. [ 1.149345] raid6: using algorithm neonx4 gen() 1622 MB/s
  199. [ 1.149359] raid6: .... xor() 1177 MB/s, rmw enabled
  200. [ 1.149371] raid6: using neon recovery algorithm
  201. [ 1.150246] iommu: Default domain type: Translated
  202. [ 1.150266] iommu: DMA domain TLB invalidation policy: strict mode
  203. [ 1.150562] SCSI subsystem initialized
  204. [ 1.150788] usbcore: registered new interface driver usbfs
  205. [ 1.150837] usbcore: registered new interface driver hub
  206. [ 1.150880] usbcore: registered new device driver usb
  207. [ 1.151179] pps_core: LinuxPPS API ver. 1 registered
  208. [ 1.151195] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  209. [ 1.151224] PTP clock support registered
  210. [ 1.151844] Advanced Linux Sound Architecture Driver Initialized.
  211. [ 1.152526] NetLabel: Initializing
  212. [ 1.152540] NetLabel: domain hash size = 128
  213. [ 1.152552] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  214. [ 1.152631] NetLabel: unlabeled traffic allowed by default
  215. [ 1.153059] clocksource: Switched to clocksource arch_sys_counter
  216. [ 1.153249] VFS: Disk quotas dquot_6.6.0
  217. [ 1.153314] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  218. [ 1.153894] AppArmor: AppArmor Filesystem Enabled
  219. [ 1.160556] NET: Registered PF_INET protocol family
  220. [ 1.160711] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  221. [ 1.161556] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
  222. [ 1.161600] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
  223. [ 1.161692] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  224. [ 1.161858] TCP: Hash tables configured (established 8192 bind 8192)
  225. [ 1.161983] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  226. [ 1.162034] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  227. [ 1.162195] NET: Registered PF_UNIX/PF_LOCAL protocol family
  228. [ 1.162680] Trying to unpack rootfs image as initramfs...
  229. [ 1.174326] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  230. [ 1.180121] Initialise system trusted keyrings
  231. [ 1.180193] Key type blacklist registered
  232. [ 1.180407] workingset: timestamp_bits=44 max_order=18 bucket_order=0
  233. [ 1.186274] zbud: loaded
  234. [ 1.187848] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  235. [ 1.190098] integrity: Platform Keyring initialized
  236. [ 1.237330] xor: automatically using best checksumming function 32regs
  237. [ 1.237383] async_tx: api initialized (async)
  238. [ 1.237400] Key type asymmetric registered
  239. [ 1.237413] Asymmetric key parser 'x509' registered
  240. [ 1.237533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  241. [ 1.237695] io scheduler mq-deadline registered
  242. [ 1.237711] io scheduler kyber registered
  243. [ 1.237916] io scheduler bfq registered
  244. [ 1.242500] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  245. [ 1.253148] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  246. [ 1.258838] cacheinfo: Unable to detect cache hierarchy for CPU 0
  247. [ 1.262967] loop: module loaded
  248. [ 1.265025] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  249. [ 1.265133] ehci-platform: EHCI generic platform driver
  250. [ 1.265292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  251. [ 1.265316] ohci-platform: OHCI generic platform driver
  252. [ 1.265723] usbcore: registered new interface driver usb-storage
  253. [ 1.266189] mousedev: PS/2 mouse device common for all mice
  254. [ 1.267114] sun6i-rtc 7000000.rtc: registered as rtc0
  255. [ 1.267158] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:07 UTC (7)
  256. [ 1.267276] sun6i-rtc 7000000.rtc: RTC enabled
  257. [ 1.267396] i2c_dev: i2c /dev entries driver
  258. [ 1.268067] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  259. [ 1.269552] sdhci: Secure Digital Host Controller Interface driver
  260. [ 1.269587] sdhci: Copyright(c) Pierre Ossman
  261. [ 1.269625] Synopsys Designware Multimedia Card Interface Driver
  262. [ 1.270211] sdhci-pltfm: SDHCI platform and OF driver helper
  263. [ 1.270379] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
  264. [ 1.272043] ledtrig-cpu: registered to indicate activity on CPUs
  265. [ 1.272597] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
  266. [ 1.272875] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  267. [ 1.273014] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  268. [ 1.273173] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  269. [ 1.273277] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  270. [ 1.273368] sun8i-ce 1904000.crypto: Register cbc(aes)
  271. [ 1.273521] sun8i-ce 1904000.crypto: Register ecb(aes)
  272. [ 1.273636] sun8i-ce 1904000.crypto: Register cbc(des3_ede)
  273. [ 1.273745] sun8i-ce 1904000.crypto: Register ecb(des3_ede)
  274. [ 1.273878] sun8i-ce 1904000.crypto: Register md5
  275. [ 1.273993] sun8i-ce 1904000.crypto: Register sha1
  276. [ 1.274102] sun8i-ce 1904000.crypto: Register sha224
  277. [ 1.274218] sun8i-ce 1904000.crypto: Register sha256
  278. [ 1.274328] sun8i-ce 1904000.crypto: Register sha384
  279. [ 1.274438] sun8i-ce 1904000.crypto: Register sha512
  280. [ 1.274548] sun8i-ce 1904000.crypto: Register stdrng
  281. [ 1.275250] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0
  282. [ 1.275748] hid: raw HID events driver (C) Jiri Kosina
  283. [ 1.275890] usbcore: registered new interface driver usbhid
  284. [ 1.275907] usbhid: USB HID core driver
  285. [ 1.276676] random: fast init done
  286. [ 1.278181] random: crng init done
  287. [ 1.278652] NET: Registered PF_INET6 protocol family
  288. [ 2.006973] Freeing initrd memory: 15680K
  289. [ 2.042552] Segment Routing with IPv6
  290. [ 2.042665] In-situ OAM (IOAM) with IPv6
  291. [ 2.042764] NET: Registered PF_PACKET protocol family
  292. [ 2.042890] 8021q: 802.1Q VLAN Support v1.8
  293. [ 2.043054] 9pnet: Installing 9P2000 support
  294. [ 2.043133] Key type dns_resolver registered
  295. [ 2.043563] registered taskstats version 1
  296. [ 2.043587] Loading compiled-in X.509 certificates
  297. [ 2.047453] Loaded X.509 cert 'Build time autogenerated kernel key: bcc3e2753dc7b0d253b541b07c1f0e6f1eedd00a'
  298. [ 2.050347] zswap: loaded using pool zstd/z3fold
  299. [ 2.050985] Key type ._fscrypt registered
  300. [ 2.051002] Key type .fscrypt registered
  301. [ 2.051014] Key type fscrypt-provisioning registered
  302. [ 2.052035] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no
  303. [ 2.069245] Key type encrypted cregistered
  304. [ 2.069295] AppArmor: AppArmor sha1 policy hashing enabled
  305. [ 2.069343] ima: No TPM chip found, activating TPM-bypass!
  306. [ 2.069389] ima: Allocated hash algorithm: sha1
  307. [ 2.069430] ima: No architecture policies found
  308. [ 2.069486] evm: Initialising EVM extended attributes:
  309. [ 2.069500] evm: security.selinux
  310. [ 2.069511] evm: security.SMACK64
  311. [ 2.069522] evm: security.SMACK64EXEC
  312. [ 2.069533] evm: security.SMACK64TRANSMUTE
  313. [ 2.069543] evm: security.SMACK64MMAP
  314. [ 2.069554] evm: security.apparmor
  315. [ 2.069564] evm: security.ima
  316. [ 2.069574] evm: security.capability
  317. [ 2.069584] evm: HMAC attrs: 0x1
  318. [ 2.081243] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top
  319. [ 2.081660] sun8i-mixer 1100000.mixer: Adding to iommu group 0
  320. [ 2.082244] sunxi-rsb 7083000.rsb: RSB running at 3000000 Hz
  321. [ 2.082594] axp20x-rsb sunxi-rsb-745: AXP20x variant AXP806 found
  322. [ 2.083042] axp20x-rsb sunxi-rsb-745: Failed to set masks in 0x40: -5
  323. [ 2.083067] axp20x-rsb sunxi-rsb-745: failed to add irq chip: -5
  324. [ 2.083084] axp20x-rsb: probe of sunxi-rsb-745 failed with error -5
  325. [ 2.087959] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  326. [ 2.088360] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
  327. [ 2.088924] printk: console [ttyS0] disabled
  328. [ 2.089016] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 33, base_baud = 1500000) is a 16550A
  329. [ 3.505940] printk: console [ttyS0] enabled
  330. [ 3.511454] sun4i-drm display-engine: Adding to iommu group 0
  331. [ 3.536629] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e05cf8)
  332. [ 3.544399] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e09f20)
  333. [ 3.552506] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e00f08)
  334. [ 3.560932] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator
  335. [ 3.569024] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  336. [ 3.578977] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin
  337. [ 3.579237] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  338. [ 3.591786] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e05030)
  339. [ 3.599744] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  340. [ 3.607550] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1
  341. [ 3.785580] Console: switching to colour frame buffer device 128x48
  342. [ 3.808657] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
  343. [ 3.818995] sun50i_cpufreq_nvmem: Using CPU speed bin speed0
  344. [ 3.825832] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
  345. [ 3.825943] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  346. [ 3.832838] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  347. [ 3.848700] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  348. [ 3.855843] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  349. [ 3.864512] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  350. [ 3.871837] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  351. [ 3.878888] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  352. [ 3.888639] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  353. [ 3.888852] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  354. [ 3.895964] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  355. [ 3.895973] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  356. [ 3.896306] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  357. [ 3.927470] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  358. [ 3.934529] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  359. [ 3.944031] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  360. [ 3.951363] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  361. [ 3.958505] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  362. [ 3.967454] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  363. [ 3.967709] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  364. [ 3.974787] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  365. [ 3.996280] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  366. [ 4.010744] of_cfs_init
  367. [ 4.019142] of_cfs_init: OK
  368. [ 4.027790] ALSA device list:
  369. [ 4.036379] No soundcards found.
  370. [ 4.046490] Freeing unused kernel memory: 2496K
  371. [ 4.057137] Run /init as init process
  372. [ 4.400196] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  373. [ 4.412905] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  374. [ 4.425275] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  375. [ 4.439728] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  376. [ 4.440143] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  377. [ 4.452140] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  378. [ 4.477901] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  379. [ 4.493372] panfrost 1800000.gpu: clock rate = 432000000
  380. [ 4.503927] panfrost 1800000.gpu: bus_clock rate = 100000000
  381. [ 4.527952] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  382. [ 4.540295] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  383. [ 4.552290] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  384. [ 4.566541] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  385. [ 4.577223] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  386. [ 4.578574] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  387. [ 4.603618] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  388. [ 4.604901] panfrost 1800000.gpu: clock rate = 432000000
  389. [ 4.626913] panfrost 1800000.gpu: bus_clock rate = 100000000
  390. [ 4.638719] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  391. [ 4.638730] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  392. [ 4.638738] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  393. done.
  394.  
  395. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  396.  
  397. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  398.  
  399. done.
  400.  
  401. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
  402.  
  403. Begin: Running /scripts/local-block ... done.
  404.  
  405. Begin: Running /scripts/local-block ... done.
  406.  
  407. Begin: Running /scripts/local-block ... done.
  408.  
  409. Begin: Running /scripts/local-block ... done.
  410.  
  411. Begin: Running /scripts/local-block ... done.
  412.  
  413. Begin: Running /scripts/local-block ... done.
  414.  
  415. Begin: Running /scripts/local-block ... done.
  416.  
  417. Begin: Running /scripts/local-block ... done.
  418.  
  419. Begin: Running /scripts/local-block ... done.
  420.  
  421. Begin: Running /scripts/local-block ... done.
  422.  
  423. Begin: Running /scripts/local-block ... done.
  424.  
  425. Begin: Running /scripts/local-block ... done.
  426.  
  427. Begin: Running /scripts/local-block ... done.
  428.  
  429. Begin: Running /scripts/local-block ... done.
  430.  
  431. Begin: Running /scripts/local-block ... done.
  432.  
  433. Begin: Running /scripts/local-block ... done.
  434.  
  435. Begin: Running /scripts/local-block ... done.
  436.  
  437. Begin: Running /scripts/local-block ... done.
  438.  
  439. Begin: Running /scripts/local-block ... done.
  440.  
  441. Begin: Running /scripts/local-block ... done.
  442.  
  443. Begin: Running /scripts/local-block ... done.
  444.  
  445. Begin: Running /scripts/local-block ... done.
  446.  
  447. Begin: Running /scripts/local-block ... done.
  448.  
  449. Begin: Running /scripts/local-block ... done.
  450.  
  451. Begin: Running /scripts/local-block ... done.
  452.  
  453. Begin: Running /scripts/local-block ... done.
  454.  
  455. Begin: Running /scripts/local-block ... done.
  456.  
  457. Begin: Running /scripts/local-block ... done.
  458.  
  459. Begin: Running /scripts/local-block ... done.
  460.  
  461. done.
  462.  
  463. Gave up waiting for root file system device. Common problems:
  464.  
  465. - Boot args (cat /proc/cmdline)
  466.  
  467. - Check rootdelay= (did the system wait long enough?)
  468.  
  469. - Missing modules (cat /proc/modules; ls /dev)
  470.  
  471. ALERT! UUID=f3ac882e-1afb-4743-a26d-d9f18fd90a69 does not exist. Dropping to a shell!
  472.  
  473.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!