API tools faq
paste
Bullet64

recalbox_first_try

Bullet64
Feb 21st, 2019
209
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 76.71 KB | None | 0 0
raw download clone embed print report
  1. # dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Initializing cgroup subsys cpuset
  4. [ 0.000000] Initializing cgroup subsys cpu
  5. [ 0.000000] Initializing cgroup subsys cpuacct
  6. [ 0.000000] Linux version 4.4.171 (adam@adam-vb) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #1 SMP Mon Feb 18 14:35:21 EST 2019
  7. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  8. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  9. [ 0.000000] bootconsole [uart0] enabled
  10. [ 0.000000] On node 0 totalpages: 523776
  11. [ 0.000000] DMA zone: 8184 pages used for memmap
  12. [ 0.000000] DMA zone: 0 pages reserved
  13. [ 0.000000] DMA zone: 523776 pages, LIFO batch:31
  14. [ 0.000000] psci: probing for conduit method from DT.
  15. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  16. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  17. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  18. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07feed000 s45800 r8192 d32024 u86016
  19. [ 0.000000] pcpu-alloc: s45800 r8192 d32024 u86016 alloc=21*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  21. [ 0.000000] Detected VIPT I-cache on CPU0
  22. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  23. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515592
  24. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=tty3 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 eth1addr= serial=8a0653d7f0214bc cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 video=HDMI-A-1:1920x1080@60 quiet loglevel=3 vga=current
  25. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  26. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  27. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  28. [ 0.000000] software IO TLB: mapped [mem 0x7fea5000-0x7fee5000] (0MB)
  29. [ 0.000000] Memory: 2035700K/2095104K available (13118K kernel code, 1838K rwdata, 5148K rodata, 1088K init, 787K bss, 59404K reserved, 0K cma-reserved)
  30. [ 0.000000] Virtual kernel memory layout:
  31. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  32. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
  33. [ 0.000000] .init : 0xffffff8009260000 - 0xffffff8009370000 ( 1088 KB)
  34. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008d50000 ( 13120 KB)
  35. [ 0.000000] .rodata : 0xffffff8008d50000 - 0xffffff8009260000 ( 5184 KB)
  36. [ 0.000000] .data : 0xffffff8009370000 - 0xffffff800953b808 ( 1839 KB)
  37. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  38. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
  39. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
  40. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
  41. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
  42. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  43. [ 0.000000] Hierarchical RCU implementation.
  44. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  45. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  46. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  47. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  48. [ 0.000000] GIC: Using split EOI/Deactivate mode
  49. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  50. [ 0.000000] ITS: allocated 65536 Devices @300000 (psz 64K, shr 0)
  51. [ 0.000000] ITS: using cache flushing for cmd queue
  52. [ 0.000000] GIC: using LPI property table @0x0000000000290000
  53. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  54. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  55. [ 0.000000] CPU0: using LPI pending table @0x00000000002a0000
  56. [ 0.000000] GIC: using cache flushing for LPI property table
  57. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  58. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  59. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  64. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  65. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  66. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  67. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  68. [ 0.001393] Console: colour dummy device 80x25
  69. [ 0.001406] console [tty3] enabled
  70. [ 0.001415] bootconsole [uart0] disabled
  71. [ 0.001439] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  72. [ 0.001452] pid_max: default: 32768 minimum: 301
  73. [ 0.001602] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  74. [ 0.001614] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  75. [ 0.002342] Initializing cgroup subsys devices
  76. [ 0.002361] Initializing cgroup subsys freezer
  77. [ 0.002392] ftrace: allocating 47108 entries in 185 pages
  78. [ 0.125043] sched-energy: Sched-energy-costs installed from DT
  79. [ 0.125060] CPU0: update cpu_capacity 401
  80. [ 0.125120] ASID allocator initialised with 32768 entries
  81. [ 0.128314] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  82. [ 0.128827] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  83. [ 0.130188] Detected VIPT I-cache on CPU1
  84. [ 0.130223] CPU1: found redistributor 1 region 0:0x00000000fef20000
  85. [ 0.130251] CPU1: using LPI pending table @0x000000007d130000
  86. [ 0.130295] CPU1: update cpu_capacity 401
  87. [ 0.130300] CPU1: Booted secondary processor [410fd034]
  88. [ 0.130849] Detected VIPT I-cache on CPU2
  89. [ 0.130869] CPU2: found redistributor 2 region 0:0x00000000fef40000
  90. [ 0.130897] CPU2: using LPI pending table @0x000000007d160000
  91. [ 0.130924] CPU2: update cpu_capacity 401
  92. [ 0.130927] CPU2: Booted secondary processor [410fd034]
  93. [ 0.131459] Detected VIPT I-cache on CPU3
  94. [ 0.131480] CPU3: found redistributor 3 region 0:0x00000000fef60000
  95. [ 0.131506] CPU3: using LPI pending table @0x000000007d1b0000
  96. [ 0.131532] CPU3: update cpu_capacity 401
  97. [ 0.131536] CPU3: Booted secondary processor [410fd034]
  98. [ 0.132059] Detected PIPT I-cache on CPU4
  99. [ 0.132087] CPU4: found redistributor 100 region 0:0x00000000fef80000
  100. [ 0.132125] CPU4: using LPI pending table @0x000000007d1e0000
  101. [ 0.132162] CPU4: update cpu_capacity 1024
  102. [ 0.132166] CPU4: Booted secondary processor [410fd082]
  103. [ 0.132712] Detected PIPT I-cache on CPU5
  104. [ 0.132730] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  105. [ 0.132766] CPU5: using LPI pending table @0x000000007d210000
  106. [ 0.132792] CPU5: update cpu_capacity 1024
  107. [ 0.132795] CPU5: Booted secondary processor [410fd082]
  108. [ 0.132882] Brought up 6 CPUs
  109. [ 0.132967] SMP: Total of 6 processors activated.
  110. [ 0.132976] CPU features: detected feature: GIC system register CPU interface
  111. [ 0.132985] CPU features: detected feature: 32-bit EL0 Support
  112. [ 0.132998] CPU: All CPU(s) started at EL2
  113. [ 0.133044] alternatives: patching kernel code
  114. [ 0.134450] devtmpfs: initialized
  115. [ 0.151143] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  116. [ 0.151169] futex hash table entries: 2048 (order: 5, 131072 bytes)
  117. [ 0.151640] pinctrl core: initialized pinctrl subsystem
  118. [ 0.151877] regulator-dummy: no parameters
  119. [ 0.153657] NET: Registered protocol family 16
  120. [ 0.159338] cpuidle: using governor ladder
  121. [ 0.163345] cpuidle: using governor menu
  122. [ 0.163943] vdso: 2 pages (1 code @ ffffff8008d56000, 1 data @ ffffff8009374000)
  123. [ 0.163972] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  124. [ 0.164519] DMA: preallocated 1024 KiB pool for atomic allocations
  125. [ 0.179664] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
  126. [ 0.179742] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
  127. [ 0.179812] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
  128. [ 0.179885] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
  129. [ 0.179955] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
  130. [ 0.221692] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]'
  131. [ 0.221718] dc_12v: 12000 mV
  132. [ 0.221886] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
  133. [ 0.221939] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
  134. [ 0.221957] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree
  135. [ 0.222067] vcc_sys: supplied by dc_12v
  136. [ 0.222077] dc_12v: could not add device link regulator.2 err -2
  137. [ 0.222116] vcc_sys: 5000 mV
  138. [ 0.222263] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
  139. [ 0.222312] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
  140. [ 0.222327] vcc_phy: no parameters
  141. [ 0.222475] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
  142. [ 0.222525] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
  143. [ 0.222541] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
  144. [ 0.222579] vcc3v3_sys: supplied by vcc_sys
  145. [ 0.222587] vcc_sys: could not add device link regulator.4 err -2
  146. [ 0.222613] vcc3v3_sys: 3300 mV
  147. [ 0.222774] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  148. [ 0.222941] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
  149. [ 0.222987] vcc5v0_host: no parameters
  150. [ 0.223149] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  151. [ 0.223208] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-sdio[0]'
  152. [ 0.223225] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  153. [ 0.223241] vcc1v8_sdio: unable to resolve supply
  154. [ 0.223248] vcc1v8_sdio: 1800 mV
  155. [ 0.223367] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  156. [ 0.223382] vcc1v8_sdio: regulator get failed, ret=-517
  157. [ 0.223393] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  158. [ 0.223407] vcc1v8_sdio: unable to resolve supply
  159. [ 0.223415] reg-fixed-voltage vcc1v8-sdio: vcc1v8_sdio supplying 1800000uV
  160. [ 0.223525] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-wifi[0]'
  161. [ 0.223542] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  162. [ 0.223557] vcc1v8_wifi: unable to resolve supply
  163. [ 0.223566] vcc1v8_wifi: no parameters
  164. [ 0.223691] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  165. [ 0.223708] vcc1v8_wifi: regulator get failed, ret=-517
  166. [ 0.223718] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  167. [ 0.223731] vcc1v8_sdio: unable to resolve supply
  168. [ 0.223739] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  169. [ 0.223752] vcc1v8_wifi: unable to resolve supply
  170. [ 0.223760] reg-fixed-voltage vcc1v8-wifi: vcc1v8_wifi supplying 0uV
  171. [ 0.223886] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc12v-pcie-regulator[0]' - status (0)
  172. [ 0.223925] reg-fixed-voltage vcc12v-pcie-regulator: Looking up vin-supply from device tree
  173. [ 0.223959] vcc12v_pcie: supplied by dc_12v
  174. [ 0.223967] dc_12v: could not add device link regulator.8 err -2
  175. [ 0.224003] vcc12v_pcie: 12000 mV
  176. [ 0.224161] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  177. [ 0.224177] vcc1v8_sdio: unable to resolve supply
  178. [ 0.224185] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  179. [ 0.224199] vcc1v8_wifi: unable to resolve supply
  180. [ 0.224208] reg-fixed-voltage vcc12v-pcie-regulator: vcc12v_pcie supplying 12000000uV
  181. [ 0.224261] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-pcie-regulator[0]'
  182. [ 0.224277] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
  183. [ 0.224311] vcc3v3_pcie: supplied by vcc3v3_sys
  184. [ 0.224319] vcc3v3_sys: could not add device link regulator.9 err -2
  185. [ 0.224345] vcc3v3_pcie: 3300 mV
  186. [ 0.224492] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  187. [ 0.224507] vcc1v8_sdio: unable to resolve supply
  188. [ 0.224515] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  189. [ 0.224529] vcc1v8_wifi: unable to resolve supply
  190. [ 0.224538] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
  191. [ 0.224587] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-pcie[0]'
  192. [ 0.224603] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  193. [ 0.224617] vcc1v8_pcie: unable to resolve supply
  194. [ 0.224625] vcc1v8_pcie: 1800 mV
  195. [ 0.224768] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  196. [ 0.224786] vcc1v8_pcie: regulator get failed, ret=-517
  197. [ 0.224796] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  198. [ 0.224810] vcc1v8_sdio: unable to resolve supply
  199. [ 0.224818] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  200. [ 0.224832] vcc1v8_wifi: unable to resolve supply
  201. [ 0.224840] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  202. [ 0.224854] vcc1v8_pcie: unable to resolve supply
  203. [ 0.224862] reg-fixed-voltage vcc1v8-pcie: vcc1v8_pcie supplying 1800000uV
  204. [ 0.224911] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc0v9-pcie[0]'
  205. [ 0.224926] reg-fixed-voltage vcc0v9-pcie: Looking up vin-supply from device tree
  206. [ 0.224961] vcc0v9_pcie: supplied by vcc3v3_sys
  207. [ 0.224970] vcc3v3_sys: could not add device link regulator.11 err -2
  208. [ 0.224999] vcc0v9_pcie: 900 mV
  209. [ 0.225139] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  210. [ 0.225156] vcc1v8_sdio: unable to resolve supply
  211. [ 0.225164] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  212. [ 0.225178] vcc1v8_wifi: unable to resolve supply
  213. [ 0.225186] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  214. [ 0.225201] vcc1v8_pcie: unable to resolve supply
  215. [ 0.225209] reg-fixed-voltage vcc0v9-pcie: vcc0v9_pcie supplying 900000uV
  216. [ 0.225851] iommu: Adding device ff650000.vpu_service to group 0
  217. [ 0.225935] iommu: Adding device ff660000.rkvdec to group 1
  218. [ 0.226013] iommu: Adding device ff670000.iep to group 2
  219. [ 0.226124] iommu: Adding device ff8f0000.vop to group 3
  220. [ 0.226213] iommu: Adding device ff900000.vop to group 4
  221. [ 0.227033] rk_iommu ff670800.iommu: can't get aclk
  222. [ 0.227043] rk_iommu ff670800.iommu: can't get hclk
  223. [ 0.227759] SCSI subsystem initialized
  224. [ 0.227927] libata version 3.00 loaded.
  225. [ 0.228107] usbcore: registered new interface driver usbfs
  226. [ 0.228150] usbcore: registered new interface driver hub
  227. [ 0.228235] usbcore: registered new device driver usb
  228. [ 0.228304] media: Linux media interface: v0.10
  229. [ 0.228338] Linux video capture interface: v2.00
  230. [ 0.228425] pps_core: LinuxPPS API ver. 1 registered
  231. [ 0.228431] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  232. [ 0.228451] PTP clock support registered
  233. [ 0.229593] Advanced Linux Sound Architecture Driver Initialized.
  234. [ 0.230069] Bluetooth: Core ver 2.21
  235. [ 0.230095] NET: Registered protocol family 31
  236. [ 0.230101] Bluetooth: HCI device and connection manager initialized
  237. [ 0.230113] Bluetooth: HCI socket layer initialized
  238. [ 0.230122] Bluetooth: L2CAP socket layer initialized
  239. [ 0.230143] Bluetooth: SCO socket layer initialized
  240. [ 0.231531] clocksource: Switched to clocksource arch_sys_counter
  241. [ 0.280137] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  242. [ 0.280386] NET: Registered protocol family 2
  243. [ 0.280841] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  244. [ 0.280957] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  245. [ 0.281287] TCP: Hash tables configured (established 16384 bind 16384)
  246. [ 0.281370] UDP hash table entries: 1024 (order: 4, 98304 bytes)
  247. [ 0.281430] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
  248. [ 0.281742] NET: Registered protocol family 1
  249. [ 0.282043] RPC: Registered named UNIX socket transport module.
  250. [ 0.282050] RPC: Registered udp transport module.
  251. [ 0.282056] RPC: Registered tcp transport module.
  252. [ 0.282061] RPC: Registered tcp NFSv4.1 backchannel transport module.
  253. [ 0.282271] PCI: CLS 0 bytes, default 64
  254. [ 0.283653] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  255. [ 0.283739] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  256. [ 0.286932] Initialise system trusted keyring
  257. [ 0.294999] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  258. [ 0.295795] NFS: Registering the id_resolver key type
  259. [ 0.295820] Key type id_resolver registered
  260. [ 0.295826] Key type id_legacy registered
  261. [ 0.295901] fuse init (API version 7.23)
  262. [ 0.296264] SGI XFS with security attributes, no debug enabled
  263. [ 0.301324] NET: Registered protocol family 38
  264. [ 0.301345] Key type asymmetric registered
  265. [ 0.301356] Asymmetric key parser 'x509' registered
  266. [ 0.301509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  267. [ 0.301537] io scheduler noop registered
  268. [ 0.301548] io scheduler deadline registered
  269. [ 0.301674] io scheduler cfq registered (default)
  270. [ 0.302679] phy phy-ff770000.syscon:[email protected]: Looking up phy-supply from device tree
  271. [ 0.302692] phy phy-ff770000.syscon:[email protected]: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  272. [ 0.302969] phy phy-ff770000.syscon:[email protected]: Looking up vbus-supply from device tree
  273. [ 0.302980] phy phy-ff770000.syscon:[email protected]: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  274. [ 0.302996] phy phy-ff770000.syscon:[email protected]: Failed to get VBUS supply regulator
  275. [ 0.303135] phy phy-ff770000.syscon:[email protected]: Looking up phy-supply from device tree
  276. [ 0.303225] vcc5v0_host: could not add device link phy-ff770000.syscon:[email protected] err -2
  277. [ 0.304724] phy phy-ff770000.syscon:[email protected]: Looking up phy-supply from device tree
  278. [ 0.304736] phy phy-ff770000.syscon:[email protected]: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  279. [ 0.305823] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
  280. [ 0.305834] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
  281. [ 0.305929] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
  282. [ 0.305939] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
  283. [ 0.308214] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree
  284. [ 0.308226] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed
  285. [ 0.308245] rk-vcodec ff650000.vpu_service: no regulator for vcodec
  286. [ 0.308471] rk-vcodec ff650000.vpu_service: probe device
  287. [ 0.308705] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
  288. [ 0.309237] rk-vcodec ff650000.vpu_service: init success
  289. [ 0.309454] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree
  290. [ 0.309466] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed
  291. [ 0.309482] rk-vcodec ff660000.rkvdec: no regulator for vcodec
  292. [ 0.309906] rk-vcodec ff660000.rkvdec: probe device
  293. [ 0.310092] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
  294. [ 0.310460] rk-vcodec ff660000.rkvdec: could not find power_model node
  295. [ 0.310468] rk-vcodec ff660000.rkvdec: init success
  296. [ 0.311972] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  297. [ 0.311983] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  298. [ 0.313430] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  299. [ 0.313440] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  300. [ 0.313851] pwm-regulator vdd-log: GPIO lookup for consumer enable
  301. [ 0.313860] pwm-regulator vdd-log: using device tree for GPIO lookup
  302. [ 0.313871] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
  303. [ 0.313879] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
  304. [ 0.313887] pwm-regulator vdd-log: using lookup tables for GPIO lookup
  305. [ 0.313896] pwm-regulator vdd-log: lookup for GPIO enable failed
  306. [ 0.313919] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  307. [ 0.313995] pwm-regulator: supplied by vcc_sys
  308. [ 0.314005] vcc_sys: could not add device link regulator.12 err -2
  309. [ 0.314078] vdd_log: 800 <--> 1400 mV at 896 mV
  310. [ 0.314271] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  311. [ 0.314291] vcc1v8_sdio: unable to resolve supply
  312. [ 0.314299] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  313. [ 0.314315] vcc1v8_wifi: unable to resolve supply
  314. [ 0.314325] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  315. [ 0.314340] vcc1v8_pcie: unable to resolve supply
  316. [ 0.314793] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  317. [ 0.316455] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
  318. [ 0.317097] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
  319. [ 0.318214] [drm] Initialized drm 1.1.0 20060810
  320. [ 0.322255] [drm] Rockchip DRM driver version: v1.0.1
  321. [ 0.322796] usbcore: registered new interface driver udl
  322. [ 0.324351] Unable to detect cache hierarchy for CPU 0
  323. [ 0.325129] brd: module loaded
  324. [ 0.330229] loop: module loaded
  325. [ 0.330798] zram: Added device: zram0
  326. [ 0.331117] lkdtm: No crash points registered, enable through debugfs
  327. [ 0.332442] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  328. [ 0.334095] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
  329. [ 0.334189] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  330. [ 0.334200] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  331. [ 0.334210] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  332. [ 0.334232] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  333. [ 0.334398] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  334. [ 0.339412] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  335. [ 0.339544] stmmac - user ID: 0x10, Synopsys ID: 0x35
  336. [ 0.339550] Ring mode enabled
  337. [ 0.339556] DMA HW capability register supported
  338. [ 0.339560] Normal descriptors
  339. [ 0.339566] RX Checksum Offload Engine supported (type 2)
  340. [ 0.339571] TX Checksum insertion supported
  341. [ 0.339575] Wake-Up On Lan supported
  342. [ 0.339610] Enable RX Mitigation via HW Watchdog Timer
  343. [ 0.339722] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
  344. [ 0.404794] libphy: stmmac: probed
  345. [ 0.404804] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  346. [ 0.404812] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  347. [ 0.406009] Atmel at76x USB Wireless LAN Driver 0.17 loading
  348. [ 0.406074] usbcore: registered new interface driver at76c50x-usb
  349. [ 0.406130] Broadcom 43xx driver loaded [ Features: PNL ]
  350. [ 0.406426] usbcore: registered new interface driver zd1211rw
  351. [ 0.406517] usbcore: registered new interface driver rtl8187
  352. [ 0.406622] usbcore: registered new interface driver rtl8192cu
  353. [ 0.406691] usbcore: registered new interface driver rtl8xxxu
  354. [ 0.406765] usbcore: registered new interface driver rndis_wlan
  355. [ 0.406885] usbcore: registered new interface driver usb8xxx
  356. [ 0.407127] usbcore: registered new interface driver rt2500usb
  357. [ 0.407194] usbcore: registered new interface driver rt73usb
  358. [ 0.407265] usbcore: registered new interface driver rt2800usb
  359. [ 0.407320] usbcore: registered new interface driver mt7601u
  360. [ 0.407515] usbcore: registered new interface driver ath6kl_usb
  361. [ 0.407600] usbcore: registered new interface driver ar5523
  362. [ 0.407964] usbcore: registered new interface driver mwifiex_usb
  363. [ 0.408032] Rockchip WiFi SYS interface (V1.00) ...
  364. [ 0.408167] usbcore: registered new interface driver brcmfmac
  365. [ 0.408244] usbcore: registered new interface driver rtl8150
  366. [ 0.408300] usbcore: registered new interface driver r8152
  367. [ 0.408366] usbcore: registered new interface driver asix
  368. [ 0.408421] usbcore: registered new interface driver ax88179_178a
  369. [ 0.408480] usbcore: registered new interface driver cdc_ether
  370. [ 0.408589] usbcore: registered new interface driver rndis_host
  371. [ 0.408666] usbcore: registered new interface driver cdc_ncm
  372. [ 0.408712] usbcore: registered new interface driver cdc_mbim
  373. [ 0.410102] rockchip-dwc3 usb0: failed to get drvdata dwc3
  374. [ 0.414294] rockchip-dwc3 usb1: fail to get drvdata hcd
  375. [ 0.415551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  376. [ 0.415571] ehci-pci: EHCI PCI platform driver
  377. [ 0.415630] ehci-platform: EHCI generic platform driver
  378. [ 0.419467] ehci-platform fe3c0000.usb: EHCI Host Controller
  379. [ 0.419670] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
  380. [ 0.419777] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
  381. [ 0.425555] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  382. [ 0.425715] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  383. [ 0.425725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  384. [ 0.425734] usb usb1: Product: EHCI Host Controller
  385. [ 0.425741] usb usb1: Manufacturer: Linux 4.4.171 ehci_hcd
  386. [ 0.425748] usb usb1: SerialNumber: fe3c0000.usb
  387. [ 0.426234] hub 1-0:1.0: USB hub found
  388. [ 0.426267] hub 1-0:1.0: 1 port detected
  389. [ 0.426860] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  390. [ 0.426881] ohci-platform: OHCI generic platform driver
  391. [ 0.427379] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  392. [ 0.427575] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
  393. [ 0.427669] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
  394. [ 0.482691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  395. [ 0.482702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  396. [ 0.482709] usb usb2: Product: Generic Platform OHCI controller
  397. [ 0.482717] usb usb2: Manufacturer: Linux 4.4.171 ohci_hcd
  398. [ 0.482723] usb usb2: SerialNumber: fe3e0000.usb
  399. [ 0.483328] hub 2-0:1.0: USB hub found
  400. [ 0.483370] hub 2-0:1.0: 1 port detected
  401. [ 0.484939] usbcore: registered new interface driver cdc_wdm
  402. [ 0.485004] usbcore: registered new interface driver uas
  403. [ 0.485127] usbcore: registered new interface driver usb-storage
  404. [ 0.485181] usbcore: registered new interface driver ums-alauda
  405. [ 0.485235] usbcore: registered new interface driver ums-cypress
  406. [ 0.485290] usbcore: registered new interface driver ums-datafab
  407. [ 0.485348] usbcore: registered new interface driver ums_eneub6250
  408. [ 0.485402] usbcore: registered new interface driver ums-freecom
  409. [ 0.485457] usbcore: registered new interface driver ums-isd200
  410. [ 0.485511] usbcore: registered new interface driver ums-jumpshot
  411. [ 0.485581] usbcore: registered new interface driver ums-karma
  412. [ 0.485635] usbcore: registered new interface driver ums-onetouch
  413. [ 0.485701] usbcore: registered new interface driver ums-realtek
  414. [ 0.485763] usbcore: registered new interface driver ums-sddr09
  415. [ 0.485818] usbcore: registered new interface driver ums-sddr55
  416. [ 0.485872] usbcore: registered new interface driver ums-usbat
  417. [ 0.485987] usbcore: registered new interface driver usbserial
  418. [ 0.486033] usbcore: registered new interface driver usbserial_generic
  419. [ 0.486073] usbserial: USB Serial support registered for generic
  420. [ 0.486131] usbcore: registered new interface driver cp210x
  421. [ 0.486170] usbserial: USB Serial support registered for cp210x
  422. [ 0.486249] usbcore: registered new interface driver ftdi_sio
  423. [ 0.486285] usbserial: USB Serial support registered for FTDI USB Serial Device
  424. [ 0.486443] usbcore: registered new interface driver keyspan
  425. [ 0.486480] usbserial: USB Serial support registered for Keyspan - (without firmware)
  426. [ 0.486516] usbserial: USB Serial support registered for Keyspan 1 port adapter
  427. [ 0.486582] usbserial: USB Serial support registered for Keyspan 2 port adapter
  428. [ 0.486623] usbserial: USB Serial support registered for Keyspan 4 port adapter
  429. [ 0.486685] usbcore: registered new interface driver option
  430. [ 0.486721] usbserial: USB Serial support registered for GSM modem (1-port)
  431. [ 0.486922] usbcore: registered new interface driver oti6858
  432. [ 0.486958] usbserial: USB Serial support registered for oti6858
  433. [ 0.487020] usbcore: registered new interface driver pl2303
  434. [ 0.487055] usbserial: USB Serial support registered for pl2303
  435. [ 0.487120] usbcore: registered new interface driver qcserial
  436. [ 0.487160] usbserial: USB Serial support registered for Qualcomm USB modem
  437. [ 0.487234] usbcore: registered new interface driver sierra
  438. [ 0.487270] usbserial: USB Serial support registered for Sierra USB modem
  439. [ 0.488309] usbcore: registered new interface driver iforce
  440. [ 0.488389] usbcore: registered new interface driver xpad
  441. [ 0.488864] usbcore: registered new interface driver usbtouchscreen
  442. [ 0.489637] i2c /dev entries driver
  443. [ 0.490480] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
  444. [ 0.490490] fan53555-regulator 0-0040: using device tree for GPIO lookup
  445. [ 0.490545] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
  446. [ 0.490925] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  447. [ 0.490943] fan53555-regulator 0-0040: Looking up vin-supply from device tree
  448. [ 0.490991] fan53555-reg: supplied by vcc_sys
  449. [ 0.491000] vcc_sys: could not add device link regulator.13 err -2
  450. [ 0.492131] vdd_cpu_b: 712 <--> 1500 mV at 825 mV
  451. [ 0.492505] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  452. [ 0.492544] vcc1v8_sdio: unable to resolve supply
  453. [ 0.492554] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  454. [ 0.492572] vcc1v8_wifi: unable to resolve supply
  455. [ 0.492582] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  456. [ 0.492597] vcc1v8_pcie: unable to resolve supply
  457. [ 0.492833] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
  458. [ 0.492841] fan53555-regulator 0-0041: using device tree for GPIO lookup
  459. [ 0.492867] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
  460. [ 0.493208] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  461. [ 0.493222] fan53555-regulator 0-0041: Looking up vin-supply from device tree
  462. [ 0.493258] fan53555-reg: supplied by vcc_sys
  463. [ 0.493267] vcc_sys: could not add device link regulator.14 err -2
  464. [ 0.494421] vdd_gpu: 712 <--> 1500 mV at 1100 mV
  465. [ 0.494778] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  466. [ 0.494798] vcc1v8_sdio: unable to resolve supply
  467. [ 0.494806] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  468. [ 0.494822] vcc1v8_wifi: unable to resolve supply
  469. [ 0.494831] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  470. [ 0.494847] vcc1v8_pcie: unable to resolve supply
  471. [ 0.495402] rk808 0-001b: Pmic Chip id: 0x0
  472. [ 0.497903] rk808 0-001b: GPIO lookup for consumer dvs
  473. [ 0.497912] rk808 0-001b: using device tree for GPIO lookup
  474. [ 0.497923] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
  475. [ 0.497932] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  476. [ 0.497939] rk808 0-001b: using lookup tables for GPIO lookup
  477. [ 0.497947] rk808 0-001b: lookup for GPIO dvs failed
  478. [ 0.497955] rk808-regulator rk808-regulator: there is no dvs0 gpio
  479. [ 0.497962] rk808 0-001b: GPIO lookup for consumer dvs
  480. [ 0.497968] rk808 0-001b: using device tree for GPIO lookup
  481. [ 0.497977] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
  482. [ 0.497984] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
  483. [ 0.497991] rk808 0-001b: using lookup tables for GPIO lookup
  484. [ 0.497998] rk808 0-001b: lookup for GPIO dvs failed
  485. [ 0.498006] rk808-regulator rk808-regulator: there is no dvs1 gpio
  486. [ 0.498045] rk808 0-001b: Looking up vcc1-supply from device tree
  487. [ 0.498090] DCDC_REG1: supplied by vcc_sys
  488. [ 0.498099] vcc_sys: could not add device link regulator.15 err -2
  489. [ 0.498546] vdd_center: 900 mV
  490. [ 0.498756] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  491. [ 0.498775] vcc1v8_sdio: unable to resolve supply
  492. [ 0.498784] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  493. [ 0.498800] vcc1v8_wifi: unable to resolve supply
  494. [ 0.498809] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  495. [ 0.498826] vcc1v8_pcie: unable to resolve supply
  496. [ 0.498868] rk808 0-001b: Looking up vcc2-supply from device tree
  497. [ 0.498901] DCDC_REG2: supplied by vcc_sys
  498. [ 0.498909] vcc_sys: could not add device link regulator.16 err -2
  499. [ 0.499262] vdd_cpu_l: 750 <--> 1350 mV at 850 mV
  500. [ 0.499655] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  501. [ 0.499697] vcc1v8_sdio: unable to resolve supply
  502. [ 0.499710] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  503. [ 0.499732] vcc1v8_wifi: unable to resolve supply
  504. [ 0.499744] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  505. [ 0.499767] vcc1v8_pcie: unable to resolve supply
  506. [ 0.499833] rk808 0-001b: Looking up vcc3-supply from device tree
  507. [ 0.499981] DCDC_REG3: supplied by vcc_sys
  508. [ 0.499995] vcc_sys: could not add device link regulator.17 err -2
  509. [ 0.500046] vcc_ddr: at 5000 mV
  510. [ 0.500307] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  511. [ 0.500331] vcc1v8_sdio: unable to resolve supply
  512. [ 0.500343] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  513. [ 0.500363] vcc1v8_wifi: unable to resolve supply
  514. [ 0.500375] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  515. [ 0.500396] vcc1v8_pcie: unable to resolve supply
  516. [ 0.500448] rk808 0-001b: Looking up vcc4-supply from device tree
  517. [ 0.500513] DCDC_REG4: supplied by vcc_sys
  518. [ 0.500544] vcc_sys: could not add device link regulator.18 err -2
  519. [ 0.500737] vcc_1v8: 1800 mV
  520. [ 0.501020] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  521. [ 0.501044] vcc1v8_sdio: supplied by vcc_1v8
  522. [ 0.501095] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  523. [ 0.501118] vcc1v8_wifi: supplied by vcc_1v8
  524. [ 0.501165] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  525. [ 0.501188] vcc1v8_pcie: unable to resolve supply
  526. [ 0.501243] rk808 0-001b: Looking up vcc6-supply from device tree
  527. [ 0.501293] LDO_REG1: supplied by vcc_sys
  528. [ 0.501305] vcc_sys: could not add device link regulator.19 err -2
  529. [ 0.502151] vcc1v8_dvp: 1800 mV
  530. [ 0.502441] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  531. [ 0.502466] vcc1v8_pcie: unable to resolve supply
  532. [ 0.502544] rk808 0-001b: Looking up vcc6-supply from device tree
  533. [ 0.502593] LDO_REG2: supplied by vcc_sys
  534. [ 0.502604] vcc_sys: could not add device link regulator.20 err -2
  535. [ 0.503306] vcc3v0_touch: 3000 mV
  536. [ 0.503614] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  537. [ 0.503640] vcc1v8_pcie: unable to resolve supply
  538. [ 0.503700] rk808 0-001b: Looking up vcc7-supply from device tree
  539. [ 0.503747] LDO_REG3: supplied by vcc_sys
  540. [ 0.503759] vcc_sys: could not add device link regulator.21 err -2
  541. [ 0.504468] vcca_1v8: 1800 mV
  542. [ 0.504774] reg-fixed-voltage vcc1v8-pcie: Looking up vin-supply from device tree
  543. [ 0.504799] vcc1v8_pcie: supplied by vcca_1v8
  544. [ 0.504901] rk808 0-001b: Looking up vcc9-supply from device tree
  545. [ 0.504950] LDO_REG4: supplied by vcc_sys
  546. [ 0.504962] vcc_sys: could not add device link regulator.22 err -2
  547. [ 0.505139] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
  548. [ 0.505266] vcc_sdio: ramp_delay not set
  549. [ 0.505809] vcc_sdio: 1800 <--> 3000 mV at 3000 mV
  550. [ 0.506154] rk808 0-001b: Looking up vcc9-supply from device tree
  551. [ 0.506204] LDO_REG5: supplied by vcc_sys
  552. [ 0.506216] vcc_sys: could not add device link regulator.23 err -2
  553. [ 0.506921] vcca3v0_codec: 3000 mV
  554. [ 0.507266] rk808 0-001b: Looking up vcc10-supply from device tree
  555. [ 0.507316] LDO_REG6: supplied by vcc_sys
  556. [ 0.507328] vcc_sys: could not add device link regulator.24 err -2
  557. [ 0.508029] vcc_1v5: 1500 mV
  558. [ 0.508352] rk808 0-001b: Looking up vcc7-supply from device tree
  559. [ 0.508402] LDO_REG7: supplied by vcc_sys
  560. [ 0.508418] vcc_sys: could not add device link regulator.25 err -2
  561. [ 0.509150] vcca1v8_codec: 1800 mV
  562. [ 0.509482] rk808 0-001b: Looking up vcc11-supply from device tree
  563. [ 0.509552] LDO_REG8: supplied by vcc_sys
  564. [ 0.509564] vcc_sys: could not add device link regulator.26 err -2
  565. [ 0.510266] vcc_3v0: 3000 mV
  566. [ 0.510628] rk808 0-001b: Looking up vcc8-supply from device tree
  567. [ 0.510681] SWITCH_REG1: supplied by vcc3v3_sys
  568. [ 0.510693] vcc3v3_sys: could not add device link regulator.27 err -2
  569. [ 0.510736] vcc3v3_s3: at 3300 mV
  570. [ 0.511052] rk808 0-001b: Looking up vcc12-supply from device tree
  571. [ 0.511102] SWITCH_REG2: supplied by vcc3v3_sys
  572. [ 0.511114] vcc3v3_sys: could not add device link regulator.28 err -2
  573. [ 0.511158] vcc3v3_s0: at 3300 mV
  574. [ 0.514738] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  575. [ 0.515191] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096d2000
  576. [ 0.516100] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80096d4000
  577. [ 0.517206] fusb302 4-0022: GPIO lookup for consumer int-n
  578. [ 0.517218] fusb302 4-0022: using device tree for GPIO lookup
  579. [ 0.517258] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  580. [ 0.517292] fusb302 4-0022: GPIO lookup for consumer vbus-5v
  581. [ 0.517302] fusb302 4-0022: using device tree for GPIO lookup
  582. [ 0.517334] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  583. [ 0.517365] fusb302 4-0022: GPIO lookup for consumer vbus-other
  584. [ 0.517374] fusb302 4-0022: using device tree for GPIO lookup
  585. [ 0.517386] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  586. [ 0.517398] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  587. [ 0.517408] fusb302 4-0022: using lookup tables for GPIO lookup
  588. [ 0.517419] fusb302 4-0022: lookup for GPIO vbus-other failed
  589. [ 0.517430] fusb302 4-0022: GPIO lookup for consumer discharge
  590. [ 0.517440] fusb302 4-0022: using device tree for GPIO lookup
  591. [ 0.517451] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  592. [ 0.517462] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  593. [ 0.517471] fusb302 4-0022: using lookup tables for GPIO lookup
  594. [ 0.517481] fusb302 4-0022: lookup for GPIO discharge failed
  595. [ 0.517750] fusb302 4-0022: Can't get property of role, set role to default DRP
  596. [ 0.526160] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
  597. [ 0.526204] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80096d6000
  598. [ 0.527810] lirc_dev: IR Remote Control driver registered, major 241
  599. [ 0.527827] IR NEC protocol handler initialized
  600. [ 0.527840] IR RC5(x/sz) protocol handler initialized
  601. [ 0.527853] IR RC6 protocol handler initialized
  602. [ 0.527866] IR JVC protocol handler initialized
  603. [ 0.527879] IR Sony protocol handler initialized
  604. [ 0.527893] IR SANYO protocol handler initialized
  605. [ 0.527907] IR Sharp protocol handler initialized
  606. [ 0.527920] IR MCE Keyboard/mouse protocol handler initialized
  607. [ 0.527933] IR LIRC bridge handler initialized
  608. [ 0.527947] IR XMP protocol handler initialized
  609. [ 0.528975] rockchip-rga ff680000.rga: HW Version: 0x03.02
  610. [ 0.529299] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  611. [ 0.530391] usbcore: registered new interface driver uvcvideo
  612. [ 0.530399] USB Video Class driver (1.1.1)
  613. [ 0.531200] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  614. [ 0.531541] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  615. [ 0.531620] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
  616. [ 0.531723] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
  617. [ 0.531796] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
  618. [ 0.534766] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  619. [ 0.534989] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  620. [ 0.536136] Bluetooth: Virtual HCI driver ver 1.5
  621. [ 0.536286] Bluetooth: HCI UART driver ver 2.3
  622. [ 0.536296] Bluetooth: HCI UART protocol H4 registered
  623. [ 0.536304] Bluetooth: HCI UART protocol ATH3K registered
  624. [ 0.536404] usbcore: registered new interface driver bfusb
  625. [ 0.536483] usbcore: registered new interface driver btusb
  626. [ 0.536498] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1
  627. [ 0.536505] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5
  628. [ 0.536512] rtk_btusb: Register usb char device interface for BT driver
  629. [ 0.536773] usbcore: registered new interface driver rtk_btusb
  630. [ 0.537510] cpu cpu0: Failed to get leakage
  631. [ 0.537567] cpu cpu0: Looking up cpu-supply from device tree
  632. [ 0.538021] cpu cpu4: Failed to get leakage
  633. [ 0.538051] cpu cpu4: Looking up cpu-supply from device tree
  634. [ 0.538461] cpu cpu0: Looking up cpu-supply from device tree
  635. [ 0.538869] cpu cpu0: Looking up cpu-supply from device tree
  636. [ 0.541566] cpu cpu4: Looking up cpu-supply from device tree
  637. [ 0.545342] sdhci: Secure Digital Host Controller Interface driver
  638. [ 0.545348] sdhci: Copyright(c) Pierre Ossman
  639. [ 0.545357] Synopsys Designware Multimedia Card Interface Driver
  640. [ 0.545997] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms while pcie port initializes. Waited 0ms so far.
  641. [ 0.546565] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  642. [ 0.546593] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  643. [ 0.546604] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  644. [ 0.546646] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  645. [ 0.546663] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  646. [ 0.546673] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
  647. [ 0.546681] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
  648. [ 0.546714] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
  649. [ 0.546775] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  650. [ 0.546793] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
  651. [ 0.546799] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  652. [ 0.546807] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
  653. [ 0.546814] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
  654. [ 0.546820] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  655. [ 0.546827] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
  656. [ 0.546835] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
  657. [ 0.546840] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  658. [ 0.546847] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
  659. [ 0.546853] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
  660. [ 0.546859] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  661. [ 0.546865] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
  662. [ 0.546996] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
  663. [ 0.547014] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  664. [ 0.547023] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  665. [ 0.557587] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  666. [ 0.568656] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  667. [ 0.569043] sdhci-pltfm: SDHCI platform and OF driver helper
  668. [ 0.569638] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
  669. [ 0.569645] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
  670. [ 0.569653] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
  671. [ 0.569660] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
  672. [ 0.569666] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
  673. [ 0.569672] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
  674. [ 0.570784] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
  675. [ 0.570793] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
  676. [ 0.570822] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
  677. [ 0.570830] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
  678. [ 0.570844] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  679. [ 0.570850] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  680. [ 0.596548] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  681. [ 0.597323] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0)
  682. [ 0.597461] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0)
  683. [ 0.597732] ledtrig-cpu: registered to indicate activity on CPUs
  684. [ 0.597785] hidraw: raw HID events driver (C) Jiri Kosina
  685. [ 0.600728] usbcore: registered new interface driver usbhid
  686. [ 0.600735] usbhid: USB HID core driver
  687. [ 0.602403] usbcore: registered new interface driver snd-usb-audio
  688. [ 0.603178] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@11[0]'
  689. [ 0.603187] es8316 1-0011: Can not read property spk_ctl_gpio
  690. [ 0.603228] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@11[0]' - status (0)
  691. [ 0.609113] ip_tables: (C) 2000-2006 Netfilter Core Team
  692. [ 0.609213] Initializing XFRM netlink socket
  693. [ 0.609814] NET: Registered protocol family 10
  694. [ 0.611292] NET: Registered protocol family 17
  695. [ 0.611321] NET: Registered protocol family 15
  696. [ 0.611871] Bluetooth: RFCOMM socket layer initialized
  697. [ 0.611916] Bluetooth: RFCOMM ver 1.11
  698. [ 0.611942] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  699. [ 0.611957] Bluetooth: HIDP socket layer initialized
  700. [ 0.612026] lib80211: common routines for IEEE802.11 drivers
  701. [ 0.612032] lib80211_crypt: registered algorithm 'NULL'
  702. [ 0.612042] [WLAN_RFKILL]: Enter rfkill_wlan_init
  703. [ 0.612511] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  704. [ 0.612644] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6359sa
  705. [ 0.612649] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  706. [ 0.612654] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  707. [ 0.612662] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
  708. [ 0.612669] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
  709. [ 0.612675] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
  710. [ 0.612722] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
  711. [ 0.612728] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
  712. [ 0.612739] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  713. [ 0.612744] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  714. [ 0.612752] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  715. [ 0.612809] [BT_RFKILL]: Enter rfkill_rk_init
  716. [ 0.613160] [BT_RFKILL]: Enter rfkill_rk_probe
  717. [ 0.613186] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
  718. [ 0.613191] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
  719. [ 0.613200] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
  720. [ 0.613217] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  721. [ 0.613222] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
  722. [ 0.613240] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  723. [ 0.613245] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
  724. [ 0.613262] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
  725. [ 0.613267] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
  726. [ 0.613285] [RK808]: clkout2_prepare
  727. [ 0.613669] [BT_RFKILL]: init gpio
  728. [ 0.613701] [BT_RFKILL]: Request irq for bt wakeup host
  729. [ 0.613733] [BT_RFKILL]: ** disable irq
  730. [ 0.613738] [BT_RFKILL]: setup rfkill
  731. [ 0.613828] [BT_RFKILL]: bt_default device registered.
  732. [ 0.613878] Key type dns_resolver registered
  733. [ 0.615145] Registered cp15_barrier emulation handler
  734. [ 0.615331] Registered setend emulation handler
  735. [ 0.616608] Loading compiled-in X.509 certificates
  736. [ 0.617313] phy phy-ff770000.syscon:[email protected]: Looking up phy-supply from device tree
  737. [ 0.617320] phy phy-ff770000.syscon:[email protected]: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  738. [ 0.617829] phy phy-ff770000.syscon:[email protected]: Looking up vbus-supply from device tree
  739. [ 0.617838] phy phy-ff770000.syscon:[email protected]: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  740. [ 0.617862] phy phy-ff770000.syscon:[email protected]: Failed to get VBUS supply regulator
  741. [ 0.618372] phy phy-ff770000.syscon:[email protected]: Looking up phy-supply from device tree
  742. [ 0.618458] vcc5v0_host: could not add device link phy-ff770000.syscon:[email protected] err -2
  743. [ 0.619293] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
  744. [ 0.619299] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
  745. [ 0.619380] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
  746. [ 0.619384] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
  747. [ 0.619962] rockchip-drm display-subsystem: dmc is disabled
  748. [ 0.620257] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008df0750)
  749. [ 0.620359] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008df0750)
  750. [ 0.620652] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
  751. [ 0.620711] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  752. [ 0.621575] Registered IR keymap rc-cec
  753. [ 0.621723] input: RC for dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0/input0
  754. [ 0.621870] rc0: RC for dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0
  755. [ 0.622226] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008de64b8)
  756. [ 0.622771] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008de74d8)
  757. [ 0.622777] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  758. [ 0.622779] [drm] No driver support for vblank timestamp query.
  759. [ 0.622841] rockchip-drm display-subsystem: failed to parse loader memory
  760. [ 0.622898] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  761. [ 0.622902] cdn-dp fec00000.dp: Falling back to user helper
  762. [ 0.627820] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  763. [ 0.627964] vcc_sdio: ramp_delay not set
  764. [ 0.627972] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
  765. [ 0.645605] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  766. [ 0.961827] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
  767. [ 0.984583] dwhdmi-rockchip ff940000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
  768. [ 0.984588] dwhdmi-rockchip ff940000.hdmi: colorspace: RGB
  769. [ 0.984591] dwhdmi-rockchip ff940000.hdmi: scan mode: Underscan
  770. [ 0.984595] dwhdmi-rockchip ff940000.hdmi: colorimetry: No Data
  771. [ 0.984598] dwhdmi-rockchip ff940000.hdmi: picture aspect: 16:9
  772. [ 0.984602] dwhdmi-rockchip ff940000.hdmi: active aspect: Same as Picture
  773. [ 0.984605] dwhdmi-rockchip ff940000.hdmi: itc: IT Content
  774. [ 0.984609] dwhdmi-rockchip ff940000.hdmi: extended colorimetry: xvYCC 601
  775. [ 0.984612] dwhdmi-rockchip ff940000.hdmi: quantization range: Full
  776. [ 0.984616] dwhdmi-rockchip ff940000.hdmi: nups: Unknown Non-uniform Scaling
  777. [ 0.984619] dwhdmi-rockchip ff940000.hdmi: video code: 16
  778. [ 0.984623] dwhdmi-rockchip ff940000.hdmi: ycc quantization range: Full
  779. [ 0.984626] dwhdmi-rockchip ff940000.hdmi: hdmi content type: Graphics
  780. [ 0.984630] dwhdmi-rockchip ff940000.hdmi: pixel repeat: 0
  781. [ 0.984634] dwhdmi-rockchip ff940000.hdmi: bar top 0, bottom 0, left 0, right 0
  782. [ 1.067333] Console: switching to colour frame buffer device 240x67
  783. [ 1.128544] usb 2-1: new full-speed USB device number 2 using ohci-platform
  784. [ 1.129563] rockchip-drm display-subsystem: fb0: frame buffer device
  785. [ 1.140378] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  786. [ 1.140562] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
  787. [ 1.140703] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  788. [ 1.140751] xhci-hcd xhci-hcd.7.auto: irq 229, io mem 0xfe800000
  789. [ 1.140888] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  790. [ 1.140895] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  791. [ 1.140902] usb usb3: Product: xHCI Host Controller
  792. [ 1.140908] usb usb3: Manufacturer: Linux 4.4.171 xhci-hcd
  793. [ 1.140914] usb usb3: SerialNumber: xhci-hcd.7.auto
  794. [ 1.141358] hub 3-0:1.0: USB hub found
  795. [ 1.141384] hub 3-0:1.0: 1 port detected
  796. [ 1.141653] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  797. [ 1.141799] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
  798. [ 1.141850] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  799. [ 1.141927] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  800. [ 1.141934] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  801. [ 1.141940] usb usb4: Product: xHCI Host Controller
  802. [ 1.141946] usb usb4: Manufacturer: Linux 4.4.171 xhci-hcd
  803. [ 1.141952] usb usb4: SerialNumber: xhci-hcd.7.auto
  804. [ 1.142313] hub 4-0:1.0: USB hub found
  805. [ 1.142335] hub 4-0:1.0: 1 port detected
  806. [ 1.143561] xhci-hcd xhci-hcd.7.auto: remove, state 1
  807. [ 1.143580] usb usb4: USB disconnect, device number 1
  808. [ 1.162671] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds.
  809. [ 1.162678] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset.
  810. [ 1.162721] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered
  811. [ 1.162874] xhci-hcd xhci-hcd.7.auto: remove, state 1
  812. [ 1.162888] usb usb3: USB disconnect, device number 1
  813. [ 1.163276] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered
  814. [ 1.167838] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  815. [ 1.168011] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
  816. [ 1.168151] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  817. [ 1.168198] xhci-hcd xhci-hcd.8.auto: irq 230, io mem 0xfe900000
  818. [ 1.168338] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  819. [ 1.168346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  820. [ 1.168352] usb usb3: Product: xHCI Host Controller
  821. [ 1.168358] usb usb3: Manufacturer: Linux 4.4.171 xhci-hcd
  822. [ 1.168364] usb usb3: SerialNumber: xhci-hcd.8.auto
  823. [ 1.168763] hub 3-0:1.0: USB hub found
  824. [ 1.168789] hub 3-0:1.0: 1 port detected
  825. [ 1.169038] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  826. [ 1.169150] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
  827. [ 1.169206] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  828. [ 1.169283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  829. [ 1.169290] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  830. [ 1.169296] usb usb4: Product: xHCI Host Controller
  831. [ 1.169302] usb usb4: Manufacturer: Linux 4.4.171 xhci-hcd
  832. [ 1.169308] usb usb4: SerialNumber: xhci-hcd.8.auto
  833. [ 1.169673] hub 4-0:1.0: USB hub found
  834. [ 1.169699] hub 4-0:1.0: 1 port detected
  835. [ 1.173556] ehci-platform fe380000.usb: EHCI Host Controller
  836. [ 1.173690] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
  837. [ 1.173818] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  838. [ 1.315660] usb 2-1: New USB device found, idVendor=054c, idProduct=05c4
  839. [ 1.315673] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  840. [ 1.315679] usb 2-1: Product: Wireless Controller
  841. [ 1.315685] usb 2-1: Manufacturer: Sony Computer Entertainment
  842. [ 1.321842] sony 0003:054C:05C4.0001: Using modified Dualshock 4 report descriptor with gyroscope axes
  843. [ 1.366709] input: Sony Computer Entertainment Wireless Controller as /devices/platform/fe3e0000.usb/usb2/2-1/2-1:1.0/0003:054C:05C4.0001/input/input1
  844. [ 1.367236] sony 0003:054C:05C4.0001: input,hidraw0: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-fe3e0000.usb-1/input0
  845. [ 1.619725] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  846. [ 1.619940] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  847. [ 1.619947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  848. [ 1.619954] usb usb5: Product: EHCI Host Controller
  849. [ 1.619960] usb usb5: Manufacturer: Linux 4.4.171 ehci_hcd
  850. [ 1.619966] usb usb5: SerialNumber: fe380000.usb
  851. [ 1.620419] hub 5-0:1.0: USB hub found
  852. [ 1.620444] hub 5-0:1.0: 1 port detected
  853. [ 1.621309] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  854. [ 1.621472] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
  855. [ 1.621595] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  856. [ 1.651551] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 89
  857. [ 1.651577] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  858. [ 1.652430] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
  859. [ 1.655146] mmcblk0: p1 p2 p3
  860. [ 1.676948] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  861. [ 1.676961] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  862. [ 1.676968] usb usb6: Product: Generic Platform OHCI controller
  863. [ 1.676973] usb usb6: Manufacturer: Linux 4.4.171 ohci_hcd
  864. [ 1.676979] usb usb6: SerialNumber: fe3a0000.usb
  865. [ 1.677516] hub 6-0:1.0: USB hub found
  866. [ 1.677579] hub 6-0:1.0: 1 port detected
  867. [ 1.678464] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
  868. [ 1.678472] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
  869. [ 1.678495] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
  870. [ 1.679253] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms while pcie port initializes. Waited 1133ms so far.
  871. [ 1.679982] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]'
  872. [ 1.679990] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]'
  873. [ 1.803325] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
  874. [ 1.803518] es8316 1-0011: ASoC: Failed to create Left Hp mixer debugfs file
  875. [ 1.803544] es8316 1-0011: ASoC: Failed to create Right Hp mixer debugfs file
  876. [ 1.803560] es8316 1-0011: ASoC: Failed to create HPCP L debugfs file
  877. [ 1.803568] es8316 1-0011: ASoC: Failed to create HPCP R debugfs file
  878. [ 1.803583] es8316 1-0011: ASoC: Failed to create HPVOL L debugfs file
  879. [ 1.803591] es8316 1-0011: ASoC: Failed to create HPVOL R debugfs file
  880. [ 1.804878] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
  881. [ 1.804887] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
  882. [ 1.805105] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  883. [ 1.805112] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  884. [ 1.805118] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
  885. [ 1.805124] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
  886. [ 1.805278] asoc-simple-card: probe of spdif-sound failed with error -22
  887. [ 1.806714] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms while pcie port initializes. Waited 1261ms so far.
  888. [ 1.807615] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.9 (r)
  889. [ 1.807624] ======== dhd_wlan_init_plat_data ========
  890. [ 1.807628] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
  891. [ 1.807634] dhd_wlan_init_gpio: WL_REG_ON=-1, WL_HOST_WAKE=-1
  892. [ 1.807638] dhd_wlan_init_gpio: oob_irq=70, oob_irq_flags=0x414
  893. [ 1.807640] dhd_wifi_platform_load: Enter
  894. [ 1.807656] Power-up adapter 'DHD generic adapter'
  895. [ 1.807688] wifi_platform_set_power = 1
  896. [ 1.807691] ======== PULL WL_REG_ON(-1) HIGH! ========
  897. [ 1.807694] [WLAN_RFKILL]: rockchip_wifi_power: 1
  898. [ 1.807698] [WLAN_RFKILL]: wifi turn on power. -1
  899. [ 1.808649] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:55:16 UTC (1358499316)
  900. [ 1.827443] vcc1v8_wifi: disabling
  901. [ 1.827456] vcc3v3_pcie: disabling
  902. [ 1.827461] vcc1v8_pcie: disabling
  903. [ 1.827467] vcc0v9_pcie: disabling
  904. [ 1.828208] rk-keypad rockchip-key: no io-channels defined
  905. [ 1.828308] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  906. [ 1.828327] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  907. [ 1.828478] input: rk29-keypad as /devices/platform/rockchip-key/input/input2
  908. [ 1.829337] ALSA device list:
  909. [ 1.829342] #0: ES8316
  910. [ 1.830587] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms while pcie port initializes. Waited 1285ms so far.
  911. [ 1.922214] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  912. [ 1.922256] VFS: Mounted root (ext4 filesystem) on device 179:2.
  913. [ 1.927619] devtmpfs: mounted
  914. [ 1.928094] Freeing unused kernel memory: 1088K
  915. [ 2.082538] random: nonblocking pool is initialized
  916. [ 2.108541] wifi_platform_bus_enumerate device present 1
  917. [ 2.108547] ======== Card detection to detect SDIO card! ========
  918. [ 2.108550] sdio: host isn't initialization successfully.
  919. [ 2.191441] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  920. [ 2.336027] udevd[267]: starting version 3.2.5
  921. [ 2.479032] udevd[270]: starting eudev-3.2.5
  922. [ 2.627959] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
  923. [ 2.627977] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
  924. [ 2.628022] ff100000.saradc supply vref not found, using dummy regulator
  925. [ 2.631884] dwmmc_rockchip fe310000.dwmmc: probe defer timed out waiting for pcie init, continuing...
  926. [ 2.632091] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  927. [ 2.632140] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  928. [ 2.632152] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  929. [ 2.632234] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  930. [ 2.632271] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  931. [ 2.632492] /dwmmc@fe310000: could not find phandle
  932. [ 2.632499] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
  933. [ 2.632670] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  934. [ 2.632842] /dwmmc@fe310000: could not find phandle
  935. [ 2.632850] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
  936. [ 2.632882] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  937. [ 2.632889] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  938. [ 2.633381] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
  939. [ 2.633393] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
  940. [ 2.633404] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
  941. [ 2.633412] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
  942. [ 2.633418] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
  943. [ 2.633425] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
  944. [ 2.633714] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  945. [ 2.645394] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  946. [ 2.655604] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
  947. [ 2.656309] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
  948. [ 2.656317] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
  949. [ 2.657023] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
  950. [ 2.664367] phy phy-pcie-phy.9: Looking up phy-supply from device tree
  951. [ 2.664387] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed
  952. [ 2.665376] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  953. [ 2.665386] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  954. [ 2.665408] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  955. [ 2.665623] rockchip-pcie f8000000.pcie: Looking up vpcie12v-supply from device tree
  956. [ 2.665707] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  957. [ 2.665761] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
  958. [ 2.665797] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
  959. [ 2.665834] rockchip-pcie f8000000.pcie: missing optional "memory-region" property
  960. [ 2.665839] rockchip-pcie f8000000.pcie: missing optional "rockchip,dma_trx_enabled" property
  961. [ 2.665842] rockchip-pcie f8000000.pcie: missing optional "rockchip,deferred" property
  962. [ 2.665854] rockchip-pcie f8000000.pcie: enabled vpcie12v regulator
  963. [ 2.665859] rockchip-pcie f8000000.pcie: enabled vpcie3v3 regulator
  964. [ 2.665862] rockchip-pcie f8000000.pcie: enabled vpcie1v8 regulator
  965. [ 2.665866] rockchip-pcie f8000000.pcie: enabled vpcie0v9 regulator
  966. [ 2.665870] rockchip-pcie f8000000.pcie: calling really probe
  967. [ 2.665873] rockchip-pcie f8000000.pcie: PCIe asserting reset
  968. [ 2.665899] rockchip-pcie f8000000.pcie: advertising gen1 training
  969. [ 2.665925] rockchip-pcie f8000000.pcie: PCIe reset released
  970. [ 2.701660] mali ff9a0000.gpu: Looking up mali-supply from device tree
  971. [ 2.701928] mali ff9a0000.gpu: Failed to get leakage
  972. [ 2.701948] mali ff9a0000.gpu: Looking up mali-supply from device tree
  973. [ 2.701975] vdd_gpu: could not add device link ff9a0000.gpu err -17
  974. [ 2.701988] vdd_gpu: Failed to create debugfs directory
  975. [ 2.702030] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  976. [ 2.703046] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  977. [ 2.703332] mali ff9a0000.gpu: Protected mode not available
  978. [ 2.703996] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  979. [ 2.704356] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  980. [ 2.704450] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 413; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  981. [ 2.704891] mali ff9a0000.gpu: Probed as mali0
  982. [ 2.705848] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  983. [ 2.708779] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  984. [ 2.767234] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  985. [ 2.780378] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
  986. [ 2.785112] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  987. [ 2.785144] mmc2: new ultra high speed SDR104 SDIO card at address 0001
  988. [ 2.801656] bcmsdh_register: register client driver
  989. [ 2.801844] bcmsdh_sdmmc_probe: Enter num=1
  990. [ 2.801936] bcmsdh_sdmmc_probe: Enter num=2
  991. [ 2.801948] bus num (host idx)=2, slot num (rca)=1
  992. [ 2.801955] found adapter info 'DHD generic adapter'
  993. [ 2.802024] sdioh_attach: set sd_f2_blocksize 256
  994. [ 2.802093] sdioh_attach: sd clock rate = 0
  995. [ 2.802841] dhdsdio_probe : no mutex held. set lock
  996. [ 2.802993] F1 signature read @0x18000000=0x17294359
  997. [ 2.808208] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  998. [ 2.809171] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  999. [ 2.809294] dhd_conf_set_chiprev: chip=0x4359, chiprev=9
  1000. [ 2.809726] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
  1001. [ 2.810371] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
  1002. [ 2.811691] wl_escan_attach: Enter
  1003. [ 2.811725] wl_escan_init: Enter
  1004. [ 2.811832] wl_create_event_handler(): thread:wl_escan_handler:169 started
  1005. [ 2.811838] tsk Enter, tsk = 0xffffffc0780701b0
  1006. [ 2.811877] dhd_init_logstrs_array: Failed to open the file /installmedia/logstrs.bin
  1007. [ 2.812111] dhd_attach(): thread:dhd_watchdog_thread:16a started
  1008. [ 2.812167] dhd_attach(): thread:dhd_dpc:16b started
  1009. [ 2.812276] dhd_attach(): thread:dhd_rxf:16c started
  1010. [ 2.812290] dhd_deferred_work_init: work queue initialized
  1011. [ 2.812329] dhd_bus_set_default_min_res_mask: Unhandled chip id
  1012. [ 2.812773] sdioh_cis_read: func_cis_ptr[0]=0x10ac
  1013. [ 2.826456] Dongle Host Driver, version 1.579.77.41.9 (r)
  1014. [ 2.827643] wl_ext_iapsta_attach_netdev: bssidx=0
  1015. [ 2.827659] Register interface [wlan0] MAC: ac:83:f3:e6:1f:b2
  1016. [ 2.827659]
  1017. [ 2.827731] dhd_wl_ioctl: returning as busstate=0
  1018. [ 2.827738] dhd_dbg_detach_pkt_monitor, 2204
  1019. [ 2.827745] dhd_bus_devreset: == Power OFF ==
  1020. [ 2.828054] bcmsdh_oob_intr_unregister: Enter
  1021. [ 2.828059] bcmsdh_oob_intr_unregister: irq is not registered
  1022. [ 2.828066] dhd_txglom_enable: enable 0
  1023. [ 2.828070] dhd_conf_set_txglom_params: txglom_mode=copy
  1024. [ 2.828072] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
  1025. [ 2.828075] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
  1026. [ 2.828079] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
  1027. [ 2.828081] dhd_bus_devreset: WLAN OFF DONE
  1028. [ 2.828132] wifi_platform_set_power = 0
  1029. [ 2.828135] ======== PULL WL_REG_ON(-1) LOW! ========
  1030. [ 2.828140] [WLAN_RFKILL]: rockchip_wifi_power: 0
  1031. [ 2.828152] [WLAN_RFKILL]: wifi shut off power.
  1032. [ 2.828155] dhdsdio_probe : the lock is released.
  1033. [ 2.828269] bcmsdh_sdmmc: probe of mmc2:0001:3 failed with error -110
  1034. [ 2.828479] dhd_module_init: Exit err=0
  1035. [ 3.082037] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
  1036. [ 3.083825] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
  1037. [ 3.129301] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  1038. [ 3.165956] rockchip-pcie f8000000.pcie: PCIe link training gen1 timed out.
  1039. [ 3.165964] rockchip-pcie f8000000.pcie: init port failed
  1040. [ 3.165978] rockchip-pcie f8000000.pcie: probe init failed
  1041. [ 3.165999] rockchip-pcie f8000000.pcie: PCIe probe failed.
  1042. [ 3.166156] rockchip-pcie: probe of f8000000.pcie failed with error -110
  1043. [ 3.619642] vendor storage:20160801 ret = -1
  1044. [ 5.009863] CFG80211-ERROR) wl_cfg80211_reg_notifier : reg_notifier for intiator:0 not supported : set default
  1045. [ 5.009885] CFG80211-ERROR) wl_cfg80211_reg_notifier : Set country code 00 from User
  1046. [ 5.009905] dhd_wl_ioctl: returning as busstate=0
  1047. [ 5.009916] WLDEV-ERROR) wldev_set_country: get country failed = -19
  1048. [ 5.009922] CFG80211-ERROR) wl_cfg80211_reg_notifier : set country Failed :-19
  1049. [ 5.009937] cfg80211: World regulatory domain updated:
  1050. [ 5.009941] cfg80211: DFS Master region: unset
  1051. [ 5.009945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  1052. [ 5.009953] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  1053. [ 5.009961] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  1054. [ 5.009967] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  1055. [ 5.009973] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  1056. [ 5.009980] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  1057. [ 5.009986] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  1058. [ 5.009992] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  1059. [ 5.009998] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  1060. [ 5.037887] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  1061. [ 5.357542] [BT_RFKILL]: Enter rfkill_rk_set_power
  1062. [ 5.357550] [BT_RFKILL]: Set blocked:1
  1063. [ 5.357554] [BT_RFKILL]: bt shut off power
  1064. [ 6.359881] [BT_RFKILL]: Enter rfkill_rk_set_power
  1065. [ 6.359888] [BT_RFKILL]: Set blocked:0
  1066. [ 6.359892] [BT_RFKILL]: Enter rfkill_rk_sleep_bt
  1067. [ 6.359898] [BT_RFKILL]: *** bt sleep: 0 ***
  1068. [ 6.359924] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
  1069. [ 6.402569] [BT_RFKILL]: ENABLE UART_RTS
  1070. [ 6.503731] [BT_RFKILL]: DISABLE UART_RTS
  1071. [ 6.503802] [BT_RFKILL]: bt turn on power
  1072. [ 7.528219] ttyS0 - failed to request DMA, use interrupt mode
  1073. [ 11.738450] clk_uart0_frac p_rate(400000000) is low than rate(24000000)*20, use integer or half-div
  1074. [ 13.994863] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
  1075. [ 14.017602] dwhdmi-rockchip ff940000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
  1076. [ 14.017616] dwhdmi-rockchip ff940000.hdmi: colorspace: RGB
  1077. [ 14.017622] dwhdmi-rockchip ff940000.hdmi: scan mode: Underscan
  1078. [ 14.017629] dwhdmi-rockchip ff940000.hdmi: colorimetry: No Data
  1079. [ 14.017635] dwhdmi-rockchip ff940000.hdmi: picture aspect: 16:9
  1080. [ 14.017641] dwhdmi-rockchip ff940000.hdmi: active aspect: Same as Picture
  1081. [ 14.017647] dwhdmi-rockchip ff940000.hdmi: itc: IT Content
  1082. [ 14.017653] dwhdmi-rockchip ff940000.hdmi: extended colorimetry: xvYCC 601
  1083. [ 14.017659] dwhdmi-rockchip ff940000.hdmi: quantization range: Full
  1084. [ 14.017666] dwhdmi-rockchip ff940000.hdmi: nups: Unknown Non-uniform Scaling
  1085. [ 14.017671] dwhdmi-rockchip ff940000.hdmi: video code: 16
  1086. [ 14.017677] dwhdmi-rockchip ff940000.hdmi: ycc quantization range: Full
  1087. [ 14.017683] dwhdmi-rockchip ff940000.hdmi: hdmi content type: Graphics
  1088. [ 14.017689] dwhdmi-rockchip ff940000.hdmi: pixel repeat: 0
  1089. [ 14.017695] dwhdmi-rockchip ff940000.hdmi: bar top 0, bottom 0, left 0, right 0
  1090. [ 60.639023] cdn-dp fec00000.dp: [drm:cdn_dp_request_firmware] *ERROR* failed to request firmware: -11
  1091. #
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!