Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.10.52-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc -8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1441 SMP Tue Aug 3 18:10:09 BST 2021
- [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
- [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
- [ 0.000000] random: fast init done
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 M iB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id share d-dma-pool
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
- [ 0.000000] On node 0 totalpages: 242688
- [ 0.000000] DMA zone: 2133 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 242688 pages, LIFO batch:63
- [ 0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920
- [ 0.000000] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
- [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835 .enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1024 bcm2708_ fb.fbheight=768 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0 x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty3 consoleblank=0 loglevel=0 root=PARTUUID=38df017e-02 rootfstype=ext4 elevator=deadline fsck.rep air=yes rootwait quiet splash logo.nologo vt.global_cursor_default=0 plymouth.ig nore-serial-consoles
- [ 0.000000] Kernel parameter elevator= does not have any effect anymore.
- Please use sysfs to set IO scheduler for individual devices.
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, li near)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 878804K/970752K available (10240K kernel code, 1312K rwda ta, 2948K rodata, 1024K init, 863K bss, 26412K reserved, 65536K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] ftrace: allocating 32043 entries in 63 pages
- [ 0.000000] ftrace: allocated 63 pages with 6 groups
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] Rude variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] random: get_random_bytes called from start_kernel+0x3ac/0x580 wit h crng_init=1
- [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980 46511078ns
- [ 0.000020] Switching to timer-based delay loop, resolution 52ns
- [ 0.000300] Console: colour dummy device 80x30
- [ 0.000373] printk: console [tty3] enabled
- [ 0.000428] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000456] pid_max: default: 32768 minimum: 301
- [ 0.000664] LSM: Security Framework initializing
- [ 0.000902] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linea r)
- [ 0.000925] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.002346] cgroup: Disabling memory control group subsystem
- [ 0.002605] CPU: Testing write buffer coherency: ok
- [ 0.003085] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.004320] Setting up static identity map for 0x100000 - 0x10003c
- [ 0.004504] rcu: Hierarchical SRCU implementation.
- [ 0.005421] smp: Bringing up secondary CPUs ...
- [ 0.006555] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.007819] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.009013] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.009171] smp: Brought up 1 node, 4 CPUs
- [ 0.009193] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.009204] CPU: All CPU(s) started in HYP mode.
- [ 0.009215] CPU: Virtualization extensions available.
- [ 0.010255] devtmpfs: initialized
- [ 0.028301] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
- [ 0.028552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
- [ 0.028581] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.031852] pinctrl core: initialized pinctrl subsystem
- [ 0.032993] NET: Registered protocol family 16
- [ 0.037321] DMA: preallocated 1024 KiB pool for atomic coherent allocations
- [ 0.043040] audit: initializing netlink subsys (disabled)
- [ 0.043321] audit: type=2000 audit(0.040:1): state=initialized audit_enabled= 0 res=1
- [ 0.043921] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.045198] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.045213] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.045509] Serial: AMBA PL011 UART driver
- [ 0.066276] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- [ 0.080108] raspberrypi-firmware soc:firmware: Attached to firmware from 2021 -08-03T18:17:07, variant start
- [ 0.090118] raspberrypi-firmware soc:firmware: Firmware hash is 40787ee590564 4f639a2a0f6e00ae12e517a2211
- [ 0.134752] Kprobes globally optimized
- [ 0.139715] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
- [ 0.141956] SCSI subsystem initialized
- [ 0.142215] usbcore: registered new interface driver usbfs
- [ 0.142280] usbcore: registered new interface driver hub
- [ 0.142350] usbcore: registered new device driver usb
- [ 0.144625] clocksource: Switched to clocksource arch_sys_counter
- [ 1.918033] VFS: Disk quotas dquot_6.6.0
- [ 1.918153] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.918355] FS-Cache: Loaded
- [ 1.918633] CacheFiles: Loaded
- [ 1.929837] NET: Registered protocol family 2
- [ 1.930090] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line ar)
- [ 1.931583] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 1.931724] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 1.931842] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 1.932034] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.932203] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 1.932259] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 1.932582] NET: Registered protocol family 1
- [ 1.933553] RPC: Registered named UNIX socket transport module.
- [ 1.933566] RPC: Registered udp transport module.
- [ 1.933578] RPC: Registered tcp transport module.
- [ 1.933590] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.935638] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counter s available
- [ 1.939404] Initialise system trusted keyrings
- [ 1.939685] workingset: timestamp_bits=14 max_order=18 bucket_order=4
- [ 1.949220] zbud: loaded
- [ 1.951290] FS-Cache: Netfs 'nfs' registered for caching
- [ 1.952154] NFS: Registering the id_resolver key type
- [ 1.952204] Key type id_resolver registered
- [ 1.952216] Key type id_legacy registered
- [ 1.952376] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.952390] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering ...
- [ 1.953574] Key type asymmetric registered
- [ 1.953589] Asymmetric key parser 'x509' registered
- [ 1.953645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49)
- [ 1.953660] io scheduler mq-deadline registered
- [ 1.953672] io scheduler kyber registered
- [ 1.957181] bcm2708_fb soc:fb: FB found 1 display(s)
- [ 1.972741] Console: switching to colour frame buffer device 128x48
- [ 1.985974] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 102 4x768
- [ 1.989748] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
- [ 1.990530] bcm2835-aux-uart 3f215040.serial: there is not valid maps for sta te default
- [ 1.992341] bcm2835-rng 3f104000.rng: hwrng registered
- [ 1.992801] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000 000(1024 MiB)
- [ 1.993660] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f2 00000
- [ 2.006084] brd: module loaded
- [ 2.018127] loop: module loaded
- [ 2.019906] Loading iSCSI transport class v2.0-870.
- [ 2.021500] libphy: Fixed MDIO Bus: probed
- [ 2.021805] usbcore: registered new interface driver lan78xx
- [ 2.021872] usbcore: registered new interface driver smsc95xx
- [ 2.021897] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 2.750100] Core Release: 2.80a
- [ 2.750116] Setting default values for core params
- [ 2.750146] Finished setting default values for core params
- [ 2.950535] Using Buffer DMA mode
- [ 2.950550] Periodic Transfer Interrupt Enhancement - disabled
- [ 2.950561] Multiprocessor Interrupt Enhancement - disabled
- [ 2.950575] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 2.950601] Dedicated Tx FIFOs mode
- [ 2.951217] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7514 000 dma = 0xf7514000 len=9024
- [ 2.951247] FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- Interrupt/Control Split Transaction hack enabled
- [ 2.951261] dwc_otg: Microframe scheduler enabled
- [ 2.951331] WARN::hcd_init_fiq:457: FIQ on core 1
- [ 2.951346] WARN::hcd_init_fiq:458: FIQ ASM at 807c8de0 length 36
- [ 2.951363] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
- [ 2.951385] dwc_otg 3f980000.usb: DWC OTG Controller
- [ 2.951423] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- [ 2.951471] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
- [ 2.951525] Init: Port Power? op_state=1
- [ 2.951536] Init: Power Port (0)
- [ 2.951917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10
- [ 2.951935] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 2.951950] usb usb1: Product: DWC OTG Controller
- [ 2.951965] usb usb1: Manufacturer: Linux 5.10.52-v7+ dwc_otg_hcd
- [ 2.951979] usb usb1: SerialNumber: 3f980000.usb
- [ 2.952725] hub 1-0:1.0: USB hub found
- [ 2.952804] hub 1-0:1.0: 1 port detected
- [ 2.954032] dwc_otg: FIQ enabled
- [ 2.954045] dwc_otg: NAK holdoff enabled
- [ 2.954056] dwc_otg: FIQ split-transaction FSM enabled
- [ 2.954074] Module dwc_common_port init
- [ 2.954375] usbcore: registered new interface driver usb-storage
- [ 2.954783] mousedev: PS/2 mouse device common for all mice
- [ 2.956023] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
- [ 2.958859] sdhci: Secure Digital Host Controller Interface driver
- [ 2.958871] sdhci: Copyright(c) Pierre Ossman
- [ 2.959497] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
- [ 2.960207] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
- [ 2.960465] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.962247] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.962672] hid: raw HID events driver (C) Jiri Kosina
- [ 2.962840] usbcore: registered new interface driver usbhid
- [ 2.962852] usbhid: USB HID core driver
- [ 2.968017] Initializing XFRM netlink socket
- [ 2.968063] NET: Registered protocol family 17
- [ 2.968216] Key type dns_resolver registered
- [ 2.969155] Registering SWP/SWPB emulation handler
- [ 2.969306] registered taskstats version 1
- [ 2.969339] Loading compiled-in X.509 certificates
- [ 2.970242] Key type ._fscrypt registered
- [ 2.970256] Key type .fscrypt registered
- [ 2.970269] Key type fscrypt-provisioning registered
- [ 2.981888] uart-pl011 3f201000.serial: cts_event_workaround enabled
- [ 2.982000] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
- [ 2.984208] bcm2835-aux-uart 3f215040.serial: there is not valid maps for sta te default
- [ 2.984927] printk: console [ttyS0] disabled
- [ 2.985059] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 50000000) is a 16550
- [ 2.985314] printk: console [ttyS0] enabled
- [ 2.986289] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains drive r
- [ 2.987975] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
- [ 2.987992] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
- [ 3.014966] sdhost: log_buf @ (ptrval) (f7513000)
- [ 3.052969] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 3.054651] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 3.056315] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 3.059287] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 3.063730] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 3.066825] of_cfs_init
- [ 3.067115] of_cfs_init: OK
- [ 3.084946] Indeed it is in host mode hprt0 = 00021501
- [ 3.095066] Waiting for root device PARTUUID=38df017e-02...
- [ 3.180292] mmc0: host does not support reading read-only switch, assuming wr ite-enable
- [ 3.183237] mmc0: new high speed SDHC card at address 5048
- [ 3.184232] mmcblk0: mmc0:5048 SD32G 28.9 GiB
- [ 3.187159] mmcblk0: p1 p2
- [ 3.209613] mmc1: new high speed SDIO card at address 0001
- [ 3.224880] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em
- [ 3.224896] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
- [ 3.294681] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 3.294863] Indeed it is in host mode hprt0 = 00001101
- [ 3.444405] EXT4-fs (mmcblk0p2): recovery complete
- [ 3.446075] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null)
- [ 3.446163] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 3.446932] devtmpfs: mounted
- [ 3.453808] Freeing unused kernel memory: 1024K
- [ 3.454303] Run /sbin/init as init process
- [ 3.454314] with arguments:
- [ 3.454325] /sbin/init
- [ 3.454336] splash
- [ 3.454347] with environment:
- [ 3.454357] HOME=/
- [ 3.454368] TERM=linux
- [ 3.535063] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcd Device= b.b3
- [ 3.535089] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.535913] hub 1-1:1.0: USB hub found
- [ 3.536036] hub 1-1:1.0: 4 ports detected
- [ 3.854693] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 3.985080] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, b cdDevice= b.b3
- [ 3.985104] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
- [ 3.985965] hub 1-1.1:1.0: USB hub found
- [ 3.986086] hub 1-1.1:1.0: 3 ports detected
- [ 4.084683] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
- [ 4.114017] systemd[1]: System time before build time, advancing clock.
- [ 4.218210] usb 1-1.3: New USB device found, idVendor=0483, idProduct=5750, b cdDevice= 2.00
- [ 4.218234] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3
- [ 4.218253] usb 1-1.3: Product: ByQDtech 触控USB鼠标
- [ 4.218268] usb 1-1.3: Manufacturer: 深圳市全动电子技术有限公司
- [ 4.218282] usb 1-1.3: SerialNumber: DA8CECDCA971
- [ 4.223546] input: 深圳市全动电子技术有限公司 ByQDtech 触控USB鼠标 as /device s/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:0483:5750.0001/input/i nput0
- [ 4.224136] hid-generic 0003:0483:5750.0001: input,hidraw0: USB HID v1.10 Dev ice [深圳市全动电子技术有限公司 ByQDtech 触控USB鼠标] on usb-3f980000.usb-1.3/in put0
- [ 4.266011] NET: Registered protocol family 10
- [ 4.267412] Segment Routing with IPv6
- [ 4.314699] usb 1-1.1.2: new full-speed USB device number 5 using dwc_otg
- [ 4.346862] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id)
- [ 4.348126] systemd[1]: Detected architecture arm.
- [ 4.418364] systemd[1]: Set hostname to <raspberrypi>.
- [ 4.461089] usb 1-1.1.2: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.56
- [ 4.461114] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumb er=0
- [ 4.461130] usb 1-1.1.2: Product: Microsoft® 2.4GHz Transceiver v8.0
- [ 4.461145] usb 1-1.1.2: Manufacturer: Microsoft
- [ 4.469452] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/p latform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:045E:0745.0002/ input/input1
- [ 4.536059] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Key board [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb-1.1.2/i nput0
- [ 4.544756] usb 1-1.2: new full-speed USB device number 6 using dwc_otg
- [ 4.554598] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse as /dev ices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/0003:045E:0745 .0003/input/input2
- [ 4.555685] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer Cont rol as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/000 3:045E:0745.0003/input/input3
- [ 4.625295] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Mou se [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb-1.1.2/inpu t1
- [ 4.641274] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer Cont rol as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.2/000 3:045E:0745.0004/input/input4
- [ 4.687716] usb 1-1.2: New USB device found, idVendor=0a12, idProduct=0001, b cdDevice=88.91
- [ 4.687742] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber =0
- [ 4.687759] usb 1-1.2: Product: BT DONGLE10
- [ 4.705207] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 System Contro l as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.2/0003: 045E:0745.0004/input/input6
- [ 4.705885] hid-generic 0003:045E:0745.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-3f980000.usb- 1.1.2/input2
- [ 4.804694] usb 1-1.1.3: new full-speed USB device number 7 using dwc_otg
- [ 4.936719] usb 1-1.1.3: New USB device found, idVendor=03eb, idProduct=0902, bcdDevice= 1.00
- [ 4.936743] usb 1-1.1.3: New USB device strings: Mfr=0, Product=0, SerialNumb er=0
- [ 4.937727] hub 1-1.1.3:1.0: USB hub found
- [ 4.938317] hub 1-1.1.3:1.0: 4 ports detected
- [ 5.234701] usb 1-1.1.1: new high-speed USB device number 8 using dwc_otg
- [ 5.365309] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
- [ 5.365334] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumb er=0
- [ 5.465535] usb 1-1.1.3.2: new full-speed USB device number 9 using dwc_otg
- [ 5.477639] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.494706] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.495904] systemd[1]: Listening on Journal Socket.
- [ 5.496582] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.501239] systemd[1]: Created slice User and Session Slice.
- [ 5.502374] systemd[1]: Listening on udev Control Socket.
- [ 5.510947] systemd[1]: Mounting POSIX Message Queue File System...
- [ 5.511227] systemd[1]: Reached target Slices.
- [ 5.513016] systemd[1]: Listening on Journal Audit Socket.
- [ 5.515319] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point.
- [ 5.603653] usb 1-1.1.3.2: New USB device found, idVendor=0d8c, idProduct=001 4, bcdDevice= 1.00
- [ 5.603680] usb 1-1.1.3.2: New USB device strings: Mfr=1, Product=2, SerialNu mber=0
- [ 5.603696] usb 1-1.1.3.2: Product: USB Audio Device
- [ 5.603710] usb 1-1.1.3.2: Manufacturer: C-Media Electronics Inc.
- [ 5.611432] input: C-Media Electronics Inc. USB Audio Device as /devices/plat form/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.2/1-1.1.3.2:1.3/0003:0D8C:0 014.0005/input/input7
- [ 5.635826] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No Exte rnal EEPROM. Setting MAC Speed
- [ 5.644817] libphy: lan78xx-mdiobus: probed
- [ 5.671835] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
- [ 5.685398] hid-generic 0003:0D8C:0014.0005: input,hidraw4: USB HID v1.00 Dev ice [C-Media Electronics Inc. USB Audio Device] on usb-3f980000.usb-1.1.3.2/inpu t3
- [ 5.691571] i2c /dev entries driver
- [ 6.250953] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 6.336233] random: crng init done
- [ 6.336256] random: 7 urandom warning(s) missed due to ratelimiting
- [ 6.366502] systemd-journald[114]: Received request to flush runtime journal from PID 1
- [ 7.200190] mc: Linux media interface: v0.10
- [ 7.305663] usbcore: registered new interface driver snd-usb-audio
- [ 8.004718] vc_sm_cma: module is from the staging directory, the quality is u nknown, you have been warned.
- [ 8.007268] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
- [ 8.007294] [vc_sm_connected_init]: start
- [ 8.008591] [vc_sm_connected_init]: installed successfully
- [ 8.059828] videodev: Linux video capture interface: v2.00
- [ 8.065448] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
- [ 8.093512] bcm2835_audio bcm2835_audio: card created with 4 channels
- [ 8.099902] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned.
- [ 8.104369] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned.
- [ 8.110764] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
- [ 8.120470] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
- [ 8.123367] bcm2835_audio bcm2835_audio: card created with 4 channels
- [ 8.140504] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
- [ 8.140561] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
- [ 8.143215] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
- [ 8.143266] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
- [ 8.151998] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev /video13
- [ 8.158765] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /de v/video14
- [ 8.159340] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /de v/video15
- [ 8.169082] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/ video16
- [ 8.169214] bcm2835-isp bcm2835-isp: Register output node 0 with media contro ller
- [ 8.169324] bcm2835-isp bcm2835-isp: Register capture node 1 with media contr oller
- [ 8.169433] bcm2835-isp bcm2835-isp: Register capture node 2 with media contr oller
- [ 8.169529] bcm2835-isp bcm2835-isp: Register capture node 3 with media contr oller
- [ 8.174137] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
- [ 8.175217] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
- [ 8.175280] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
- [ 8.178835] bcm2835_v4l2: module is from the staging directory, the quality i s unknown, you have been warned.
- [ 8.439949] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase
- [ 8.589326] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 8.748219] brcmfmac: F1 signature read @0x18000000=0x15264345
- [ 8.760657] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6
- [ 8.761770] usbcore: registered new interface driver brcmfmac
- [ 9.047074] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6
- [ 9.047274] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6
- [ 9.076674] Bluetooth: Core ver 2.22
- [ 9.076816] NET: Registered protocol family 31
- [ 9.076829] Bluetooth: HCI device and connection manager initialized
- [ 9.076859] Bluetooth: HCI socket layer initialized
- [ 9.076881] Bluetooth: L2CAP socket layer initialized
- [ 9.076925] Bluetooth: SCO socket layer initialized
- [ 9.103107] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
- [ 9.249299] usbcore: registered new interface driver btusb
- [ 9.254469] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workar ounds...
- [ 9.460655] input: 深圳市全动电子技术有限公司 ByQDtech 触控USB鼠标 as /device s/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:0483:5750.0001/input/i nput8
- [ 9.461466] hid-multitouch 0003:0483:5750.0001: input,hidraw0: USB HID v1.10 Device [深圳市全动电子技术有限公司 ByQDtech 触控USB鼠标] on usb-3f980000.usb-1.3 /input0
- [ 11.437230] uart-pl011 3f201000.serial: no DMA platform data
- [ 11.542822] Bluetooth: HCI UART driver ver 2.3
- [ 11.542852] Bluetooth: HCI UART protocol H4 registered
- [ 11.542987] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 11.543378] Bluetooth: HCI UART protocol Broadcom registered
- [ 11.672508] 8021q: 802.1Q VLAN Support v1.8
- [ 12.085618] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:1 02396k SSFS
- [ 12.466202] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workar ounds...
- [ 12.483483] debugfs: File 'dut_mode' in directory 'hci0' already present!
- [ 12.764185] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
- [ 13.166053] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 13.166076] Bluetooth: BNEP filters: protocol multicast
- [ 13.166107] Bluetooth: BNEP socket layer initialized
- [ 13.286443] Bluetooth: RFCOMM TTY layer initialized
- [ 13.286487] Bluetooth: RFCOMM socket layer initialized
- [ 13.286526] Bluetooth: RFCOMM ver 1.11
- [ 13.485487] 8021q: adding VLAN 0 to HW filter on device eth0
- [ 17.745240] fuse: init (API version 7.32)
- [ 18.570251] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 20.854703] usb 1-1.3: reset full-speed USB device number 4 using dwc_otg
- [ 27.743747] WARN::dwc_otg_hcd_hub_control:3808: DWC OTG HCD - Unknown hub con trol request type or invalid typeReq: c033h wIndex: 0h wValue: 0h
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement