Advertisement
Guest User

Untitled

a guest
Nov 24th, 2014
242
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 39.58 KB | None | 0 0
  1. U-Boot 2013.10-rc2-01229-g951e509 (Sep 06 2013 - 17:15:48) Allwinner Technology
  2.  
  3. CPU: Allwinner A20 (SUN7I)
  4. Board: Cubieboard2
  5. I2C: ready
  6. DRAM: 1 GiB
  7. MMC: SUNXI SD/MMC: 0
  8. *** Warning - bad CRC, using default environment
  9.  
  10. In: serial
  11. Out: serial
  12. Err: serial
  13. Net: emac
  14. Hit any key to stop autoboot: 0
  15. ** Unrecognized filesystem type **
  16. ** File not found boot/uEnv.txt **
  17. ** File not found uEnv.txt **
  18. ** Unrecognized filesystem type **
  19. ** File not found boot/boot.scr **
  20. 245 bytes read in 14 ms (16.6 KiB/s)
  21. Jumping to boot.scr
  22. ## Executing script at 44000000
  23. 45988 bytes read in 11 ms (4 MiB/s)
  24. 4833632 bytes read in 258 ms (17.9 MiB/s)
  25. ## Booting kernel from Legacy Image at 48000000 ...
  26. Image Name: Linux-3.4.43+
  27. Created: 2013-09-07 8:45:28 UTC
  28. Image Type: ARM Linux Kernel Image (uncompressed)
  29. Data Size: 4833568 Bytes = 4.6 MiB
  30. Load Address: 40008000
  31. Entry Point: 40008000
  32. Verifying Checksum ... OK
  33. Loading Kernel Image ... OK
  34.  
  35. Starting kernel ...
  36.  
  37. <6>Booting Linux on physical CPU 0
  38. <6>Initializing cgroup subsys cpuset
  39. <6>Initializing cgroup subsys cpu
  40. <5>Linux version 3.4.43+ (matson@ubt) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sat Sep 7 16:45:20 CST 2013
  41. CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  42. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  43. Machine: sun7i
  44. <6>Memory cut off:
  45. <6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  46. <4>Ignoring unrecognised tag 0x00000000
  47. <6>Memory Reserved:
  48. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  49. <6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  50. Memory policy: ECC disabled, Data cache writealloc
  51. <6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
  52. <7>On node 0 totalpages: 245760
  53. <7>free_area_init_node: node 0, pgdat c09e2140, node_mem_map d0000000
  54. <7> DMA zone: 512 pages used for memmap
  55. <7> DMA zone: 0 pages reserved
  56. <7> DMA zone: 65024 pages, LIFO batch:15
  57. <7> Normal zone: 1008 pages used for memmap
  58. <7> Normal zone: 111632 pages, LIFO batch:31
  59. <7> HighMem zone: 528 pages used for memmap
  60. <7> HighMem zone: 67056 pages, LIFO batch:15
  61. <6>PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
  62. <7>pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096<c>
  63. <7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
  64. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
  65. <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10
  66. <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
  67. <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  68. <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  69. <6>allocated 2097152 bytes of page_cgroup
  70. <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
  71. <6>Memory: 448MB 512MB = 960MB total
  72. <5>Memory: 927580k/927580k available, 55460k reserved, 270336K highmem
  73. <5>Virtual kernel memory layout:
  74. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  75. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  76. vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  77. lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  78. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  79. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  80. .text : 0xc0008000 - 0xc091b000 (9292 kB)
  81. .init : 0xc091b000 - 0xc0954dc0 ( 232 kB)
  82. .data : 0xc0956000 - 0xc09eab88 ( 595 kB)
  83. .bss : 0xc09eabac - 0xc0bb9278 (1850 kB)
  84. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  85. <6>Preemptible hierarchical RCU implementation.
  86. <6> RCU dyntick-idle grace-period acceleration is enabled.
  87. <6> Additional per-CPU info printed with stalls.
  88. <6>NR_IRQS:192
  89. <6>Architected local timer running at 24.00MHz.
  90. <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  91. <2>start_kernel(): bug: interrupts were enabled early
  92. <6>Console: colour dummy device 80x30
  93. <6>Calibrating delay loop... <c>1915.28 BogoMIPS (lpj=9576448)
  94. <6>pid_max: default: 32768 minimum: 301
  95. <6>Mount-cache hash table entries: 512
  96. <6>Initializing cgroup subsys cpuacct
  97. <6>Initializing cgroup subsys memory
  98. <6>Initializing cgroup subsys devices
  99. <6>Initializing cgroup subsys freezer
  100. <6>Initializing cgroup subsys blkio
  101. <6>Initializing cgroup subsys perf_event
  102. <6>CPU: Testing write buffer coherency: ok
  103. <6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  104. <6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  105. <6>Setting up static identity map for 0x405f9290 - 0x405f92e8
  106. CPU1: Booted secondary processor
  107. <6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  108. <6>Brought up 2 CPUs
  109. <6>SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  110. <6>devtmpfs: initialized
  111. <6>dummy:
  112. <6>NET: Registered protocol family 16
  113. <6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  114. <6>hw-breakpoint: maximum watchpoint size is 8 bytes.
  115. <6>[ccu-inf] aw clock manager init
  116. <6>[ccu-inf] aw_ccu_init
  117. <6>[ccu-inf] script config pll3 to 297MHz
  118. <6>[ccu-inf] script config pll4 to 300MHz
  119. <6>[ccu-inf] script config pll6 to 600MHz
  120. <6>[ccu-inf] script config pll7 to 297MHz
  121. <6>[ccu-inf] script config pll8 to 336MHz
  122. <6>Init eGon pin module V2.0
  123. <6>bio: create slab <bio-0> at 0
  124. <5>SCSI subsystem initialized
  125. <7>libata version 3.00 loaded.
  126. <6>usbcore: registered new interface driver usbfs
  127. <6>usbcore: registered new interface driver hub
  128. <6>usbcore: registered new device driver usb
  129. <6>Linux media interface: v0.10
  130. <6>Linux video capture interface: v2.00
  131. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  132. <6>cfg80211: Calling CRDA to update world regulatory domain
  133. <6>Switching to clocksource arch_sys_counter
  134. <5>FS-Cache: Loaded
  135. <6>CacheFiles: Loaded
  136. <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  137. <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  138. <6>hub 1-0:1.0: USB hub found
  139. <6>hub 1-0:1.0: 1 port detected
  140. <6>NET: Registered protocol family 2
  141. <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  142. <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  143. <6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  144. <6>TCP: Hash tables configured (established 131072 bind 65536)
  145. <6>TCP: reno registered
  146. <6>UDP hash table entries: 512 (order: 2, 16384 bytes)
  147. <6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  148. <6>NET: Registered protocol family 1
  149. <6>RPC: Registered named UNIX socket transport module.
  150. <6>RPC: Registered udp transport module.
  151. <6>RPC: Registered tcp transport module.
  152. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  153. <6>audit: initializing netlink socket (disabled)
  154. <5>type=2000 audit(0.510:1): initialized
  155. highmem bounce pool size: 64 pages
  156. <5>VFS: Disk quotas dquot_6.5.2
  157. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  158. <5>NFS: Registering the id_resolver key type
  159. <6>NTFS driver 2.1.30 [Flags: R/W].
  160. <6>fuse init (API version 7.18)
  161. <6>msgmni has been set to 1283
  162. <6>alg: No test for stdrng (krng)
  163. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  164. <6>io scheduler noop registered
  165. <6>io scheduler deadline registered
  166. <6>io scheduler cfq registered (default)
  167. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  168. <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  169. <6>[uart]: used uart info.: 0x01
  170. <6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
  171. <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  172. [ 0.000000] Booting Linux on physical CPU 0
  173. [ 0.000000] Initializing cgroup subsys cpuset
  174. [ 0.000000] Initializing cgroup subsys cpu
  175. [ 0.000000] Linux version 3.4.43+ (matson@ubt) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sat Sep 7 16:45:20 CST 2013
  176. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  177. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  178. [ 0.000000] Machine: sun7i
  179. [ 0.000000] Memory cut off:
  180. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  181. [ 0.000000] Ignoring unrecognised tag 0x00000000
  182. [ 0.000000] Memory Reserved:
  183. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  184. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  185. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  186. [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
  187. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
  188. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
  189. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10
  190. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  191. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  192. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  193. [ 0.000000] allocated 2097152 bytes of page_cgroup
  194. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  195. [ 0.000000] Memory: 448MB 512MB = 960MB total
  196. [ 0.000000] Memory: 927580k/927580k available, 55460k reserved, 270336K highmem
  197. [ 0.000000] Virtual kernel memory layout:
  198. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  199. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  200. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  201. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  202. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  203. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  204. [ 0.000000] .text : 0xc0008000 - 0xc091b000 (9292 kB)
  205. [ 0.000000] .init : 0xc091b000 - 0xc0954dc0 ( 232 kB)
  206. [ 0.000000] .data : 0xc0956000 - 0xc09eab88 ( 595 kB)
  207. [ 0.000000] .bss : 0xc09eabac - 0xc0bb9278 (1850 kB)
  208. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  209. [ 0.000000] Preemptible hierarchical RCU implementation.
  210. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  211. [ 0.000000] Additional per-CPU info printed with stalls.
  212. [ 0.000000] NR_IRQS:192
  213. [ 0.000000] Architected local timer running at 24.00MHz.
  214. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  215. [ 0.000000] start_kernel(): bug: interrupts were enabled early
  216. [ 0.000000] Console: colour dummy device 80x30
  217. [ 0.010876] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
  218. [ 0.076012] pid_max: default: 32768 minimum: 301
  219. [ 0.079679] Mount-cache hash table entries: 512
  220. [ 0.083892] Initializing cgroup subsys cpuacct
  221. [ 0.087209] Initializing cgroup subsys memory
  222. [ 0.090633] Initializing cgroup subsys devices
  223. [ 0.094067] Initializing cgroup subsys freezer
  224. [ 0.097294] Initializing cgroup subsys blkio
  225. [ 0.100967] Initializing cgroup subsys perf_event
  226. [ 0.104539] CPU: Testing write buffer coherency: ok
  227. [ 0.109721] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  228. [ 0.116820] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  229. [ 0.122356] Setting up static identity map for 0x405f9290 - 0x405f92e8
  230. [ 0.238131] CPU1: Booted secondary processor
  231. [ 0.297211] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  232. [ 0.299213] Brought up 2 CPUs
  233. [ 0.304524] SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  234. [ 0.307692] devtmpfs: initialized
  235. [ 0.312690] dummy:
  236. [ 0.316346] NET: Registered protocol family 16
  237. [ 0.324016] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  238. [ 0.328807] hw-breakpoint: maximum watchpoint size is 8 bytes.
  239. [ 0.331983] [ccu-inf] aw clock manager init
  240. [ 0.334254] [ccu-inf] aw_ccu_init
  241. [ 0.338207] [ccu-inf] script config pll3 to 297MHz
  242. [ 0.341957] [ccu-inf] script config pll4 to 300MHz
  243. [ 0.345722] [ccu-inf] script config pll6 to 600MHz
  244. [ 0.349469] [ccu-inf] script config pll7 to 297MHz
  245. [ 0.353215] [ccu-inf] script config pll8 to 336MHz
  246. [ 0.355965] Init eGon pin module V2.0
  247. [ 0.364202] bio: create slab <bio-0> at 0
  248. [ 0.367574] SCSI subsystem initialized
  249. [ 0.375056] usbcore: registered new interface driver usbfs
  250. [ 0.379413] usbcore: registered new interface driver hub
  251. [ 0.383542] usbcore: registered new device driver usb
  252. [ 0.386627] Linux media interface: v0.10
  253. [ 0.390258] Linux video capture interface: v2.00
  254. [ 0.395884] Advanced Linux Sound Architecture Driver Version 1.0.25.
  255. [ 0.402044] cfg80211: Calling CRDA to update world regulatory domain
  256. [ 0.406456] Switching to clocksource arch_sys_counter
  257. [ 0.408608] FS-Cache: Loaded
  258. [ 0.410786] CacheFiles: Loaded
  259. [ 0.443940] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  260. [ 0.450651] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  261. [ 0.454042] hub 1-0:1.0: USB hub found
  262. [ 0.456951] hub 1-0:1.0: 1 port detected
  263. [ 0.461447] NET: Registered protocol family 2
  264. [ 0.467779] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  265. [ 0.474699] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  266. [ 0.482145] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  267. [ 0.488689] TCP: Hash tables configured (established 131072 bind 65536)
  268. [ 0.490894] TCP: reno registered
  269. [ 0.495774] UDP hash table entries: 512 (order: 2, 16384 bytes)
  270. [ 0.501105] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  271. [ 0.504726] NET: Registered protocol family 1
  272. [ 0.509987] RPC: Registered named UNIX socket transport module.
  273. [ 0.513686] RPC: Registered udp transport module.
  274. [ 0.517345] RPC: Registered tcp transport module.
  275. [ 0.522747] RPC: Registered tcp NFSv4.1 backchannel transport module.
  276. [ 0.528171] audit: initializing netlink socket (disabled)
  277. [ 0.531922] type=2000 audit(0.510:1): initialized
  278. [ 0.536010] highmem bounce pool size: 64 pages
  279. [ 0.547324] VFS: Disk quotas dquot_6.5.2
  280. [ 0.552922] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  281. [ 0.559522] NFS: Registering the id_resolver key type
  282. [ 0.564179] NTFS driver 2.1.30 [Flags: R/W].
  283. [ 0.567459] fuse init (API version 7.18)
  284. [ 0.570955] msgmni has been set to 1283
  285. [ 0.578277] alg: No test for stdrng (krng)
  286. [ 0.585006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  287. [ 0.587897] io scheduler noop registered
  288. [ 0.591153] io scheduler deadline registered
  289. [ 0.594840] io scheduler cfq registered (default)
  290. [ 0.599621] sunxi disp driver loaded (/dev/disp api 1.0)
  291. [ 0.605216] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  292. [ 0.609616] [uart]: used uart info.: 0x01
  293. [ 0.614302] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  294. [ 0.640499] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  295. <6>console [ttyS0] enabled
  296. [ 1.290747] console [ttyS0] enabled
  297. <6>brd: module loaded
  298. [ 1.297499] brd: module loaded
  299. <6>loop: module loaded
  300. [ 1.306273] loop: module loaded
  301. [NAND] nand driver version: 0x2 0x9
  302. [ 1.312795] [NAND] nand driver version: 0x2 0x9
  303. <4>Dev Sunxi softw311 nand magic does not match for MBR 1:
  304. [ 1.373995] Dev Sunxi softw311 nand magic does not match for MBR 1:
  305. <4>Dev Sunxi softw311 nand magic does not match for MBR 2: COMMON
  306. [ 1.387073] Dev Sunxi softw311 nand magic does not match for MBR 2: COMMON
  307. <4>Dev Sunxi softw311 nand magic does not match for MBR 3: COMMON
  308. [ 1.400119] Dev Sunxi softw311 nand magic does not match for MBR 3: COMMON
  309. <4>Dev Sunxi softw311 nand magic does not match for MBR 4: COMMON
  310. [ 1.413165] Dev Sunxi softw311 nand magic does not match for MBR 4: COMMON
  311. <4>Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
  312. [ 1.427941] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
  313. <4>Dev Sunxi softw411 nand magic does not match for MBR 1:
  314. [ 1.442735] Dev Sunxi softw411 nand magic does not match for MBR 1:
  315. <4>Dev Sunxi softw411 nand magic does not match for MBR 2: RFSFAT16
  316. [ 1.456796] Dev Sunxi softw411 nand magic does not match for MBR 2: RFSFAT16
  317. <4>Dev Sunxi softw411 nand magic does not match for MBR 3:
  318. [ 1.470819] Dev Sunxi softw411 nand magic does not match for MBR 3:
  319. <4>Dev Sunxi softw411 nand magic does not match for MBR 4: SDA
  320. ;-
  321. [ 1.484918] Dev Sunxi softw411 nand magic does not match for MBR 4: SDA
  322. [ 1.484925] ;-
  323. <4>Dev Sunxi softw411 nand header bad for all MBR copies, MBR corrupted or not present.
  324. [ 1.501108] Dev Sunxi softw411 nand header bad for all MBR copies, MBR corrupted or not present.
  325. <6> nand: unknown partition table
  326. [ 1.512941] nand: unknown partition table
  327. [NAND]nand driver, ok.
  328. [ 1.519444] [NAND]nand driver, ok.
  329. <6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  330. [ 1.529140] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  331. <4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  332. [ 1.540394] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  333. <6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  334. [ 1.553139] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  335. <6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  336. [ 1.568014] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  337. <6>scsi0 : sw_ahci_platform
  338. [ 1.578747] scsi0 : sw_ahci_platform
  339. <6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  340. [ 1.589503] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  341. <6>sunxi_emac Using mii phy on PortA
  342. [ 1.600957] sunxi_emac Using mii phy on PortA
  343. <6>sunxi_emac Using MAC from SID: 02:95:06:c1:3f:66[ 1.620019] sunxi_emac Using MAC from SID: 02:95:06:c1:3f:66<6>PPP generic driver version 2.4.2
  344.  
  345. [ 1.630660] PPP generic driver version 2.4.2
  346. <6>PPP BSD Compression module registered
  347. [ 1.638995] PPP BSD Compression module registered
  348. <6>PPP Deflate Compression module registered
  349. [ 1.647724] PPP Deflate Compression module registered
  350. <6>PPP MPPE Compression module registered
  351. [ 1.657609] PPP MPPE Compression module registered
  352. <6>NET: Registered protocol family 24
  353. [ 1.665834] NET: Registered protocol family 24
  354. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  355. [ 1.676286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  356. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  357. [ 1.688007] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  358. [sw-ehci1]: open clock
  359. [ 1.696621] [sw-ehci1]: open clock
  360. [sw-ehci1]: Set USB Power ON
  361. [ 1.712653] [sw-ehci1]: Set USB Power ON
  362. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  363. [ 1.723014] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  364. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  365. [ 1.736709] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  366. <6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  367. [ 1.748134] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  368. <6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  369. [ 1.770879] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  370. <6>hub 2-0:1.0: USB hub found
  371. [ 1.779568] hub 2-0:1.0: USB hub found
  372. <6>hub 2-0:1.0: 1 port detected
  373. [ 1.786215] hub 2-0:1.0: 1 port detected
  374. [sw-ohci1]: open clock
  375. [ 1.792746] [sw-ohci1]: open clock
  376. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  377. [ 1.812245] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  378. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  379. [ 1.825604] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  380. <6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  381. [ 1.836952] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  382. <6>hub 3-0:1.0: USB hub found
  383. [ 1.903812] hub 3-0:1.0: USB hub found
  384. <6>hub 3-0:1.0: 1 port detected
  385. [ 1.910473] hub 3-0:1.0: 1 port detected
  386. [sw-ehci2]: open clock
  387. [ 1.916958] [sw-ehci2]: open clock
  388. [sw-ehci2]: Set USB Power ON
  389. [ 1.932979] [sw-ehci2]: Set USB Power ON
  390. <6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  391. [ 1.943338] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  392. <6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  393. [ 1.957009] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  394. <6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  395. [ 1.968429] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  396. <6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  397. [ 1.990873] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  398. <6>hub 4-0:1.0: USB hub found
  399. [ 1.999542] hub 4-0:1.0: USB hub found
  400. <6>hub 4-0:1.0: 1 port detected
  401. [ 2.006170] hub 4-0:1.0: 1 port detected
  402. [sw-ohci2]: open clock
  403. [ 2.012703] [sw-ohci2]: open clock
  404. <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  405. [ 2.032207] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  406. <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  407. [ 2.045556] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  408. <6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  409. [ 2.056998] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  410. <6>hub 5-0:1.0: USB hub found
  411. [ 2.123795] hub 5-0:1.0: USB hub found
  412. <6>hub 5-0:1.0: 1 port detected
  413. [ 2.130462] hub 5-0:1.0: 1 port detected
  414. <6>mousedev: PS/2 mouse device common for all mice
  415. [ 2.139446] mousedev: PS/2 mouse device common for all mice
  416. <6>input: sunxi-ir as /devices/virtual/input/input0
  417. [ 2.149983] input: sunxi-ir as /devices/virtual/input/input0
  418. IR Initial OK
  419. [ 2.157148] IR Initial OK
  420. ===========================hv_keypad_init=====================
  421. [ 2.165343] ===========================hv_keypad_init=====================
  422. ========HV Inital ===================
  423. [ 2.175609] ========HV Inital ===================
  424. <3>tkey_fetch_sysconfig_para: tkey_unused.
  425. [ 2.184237] tkey_fetch_sysconfig_para: tkey_unused.
  426. hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
  427. [ 2.196418] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
  428. <3>sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  429. [ 2.210565] sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  430. <3>sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  431. [ 2.221972] sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  432. <6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  433. [ 2.233447] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  434. <6>i2c /dev entries driver
  435. [ 2.242050] i2c /dev entries driver
  436. config i2c gpio with gpio_config api
  437. [ 2.249283] config i2c gpio with gpio_config api
  438. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  439. [ 2.259532] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  440. <4>i2c i2c-0: Invalid probe address 0x00
  441. [ 2.269219] i2c i2c-0: Invalid probe address 0x00
  442. <6>I2C: i2c-0: AW16XX I2C adapter
  443. [ 2.276991] I2C: i2c-0: AW16XX I2C adapter
  444. <4>i2c i2c-1: Invalid probe address 0x00
  445. [ 2.285071] i2c i2c-1: Invalid probe address 0x00
  446. <6>I2C: i2c-1: AW16XX I2C adapter
  447. [ 2.292834] I2C: i2c-1: AW16XX I2C adapter
  448. <4>i2c i2c-2: Invalid probe address 0x00
  449. [ 2.300887] i2c i2c-2: Invalid probe address 0x00
  450. <6>I2C: i2c-2: AW16XX I2C adapter
  451. [ 2.308632] I2C: i2c-2: AW16XX I2C adapter
  452. [ace_drv] start!!!
  453. [ 2.314523] [ace_drv] start!!!
  454. [ace_drv] init end!!!
  455. [ 2.319909] [ace_drv] init end!!!
  456. [pa_drv] start!!!
  457. [ 2.324878] [pa_drv] start!!!
  458. [pa_drv] init end!!!
  459. [ 2.330058] [pa_drv] init end!!!
  460. <6>axp20_ldo1: 1300 mV
  461. [ 2.335584] axp20_ldo1: 1300 mV
  462. <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  463. [ 2.343998] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  464. <6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  465. [ 2.354113] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  466. <6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  467. [ 2.364384] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  468. <6>axp20_buck2: 700 <--> 2275 mV at 1425 mV
  469. [ 2.374747] axp20_buck2: 700 <--> 2275 mV at 1425 mV
  470. <6>axp20_buck3: 700 <--> 3500 mV at 1300 mV
  471. [ 2.385148] axp20_buck3: 700 <--> 3500 mV at 1300 mV
  472. <6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  473. [ 2.395043] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  474. <6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  475. [ 2.409783] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  476. <4>axp20_ldo2: Failed to create debugfs directory
  477. [ 2.437580] axp20_ldo2: Failed to create debugfs directory
  478. <6>sunxi_wdt: sunxi WatchDog Timer Driver v1.0
  479. [ 2.448002] sunxi_wdt: sunxi WatchDog Timer Driver v1.0
  480. <6>sunxi_wdt: initialized (timeout=23s, nowayout=0)
  481. [ 2.458201] sunxi_wdt: initialized (timeout=23s, nowayout=0)
  482. <6>device-mapper: uevent: version 1.0.3
  483. [ 2.467996] device-mapper: uevent: version 1.0.3
  484. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  485. [ 2.480380] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  486. <6>device-mapper: multipath: version 1.3.0 loaded
  487. [ 2.493739] device-mapper: multipath: version 1.3.0 loaded
  488. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  489. [ 2.504722] device-mapper: multipath round-robin: version 1.0.0 loaded
  490. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  491. [ 2.516811] device-mapper: multipath queue-length: version 0.1.0 loaded
  492. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  493. [ 2.528987] device-mapper: multipath service-time: version 0.2.0 loaded
  494. <6>cpuidle: using governor ladder
  495. [ 2.538979] cpuidle: using governor ladder
  496. <6>cpuidle: using governor menu
  497. [ 2.545969] cpuidle: using governor menu
  498. <6>[mmc-msg] sw_mci_init
  499. [ 2.552207] [mmc-msg] sw_mci_init
  500. <6>[mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
  501. [ 2.561243] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
  502. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  503. [ 2.573101] [mmc-msg] sdc0 set round clock 400000, src 24000000
  504. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  505. [ 2.587272] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  506. <6>[mmc-msg] sdc0 Probe: base:0xf00dc000 irq:64 sg_cpu:ffdf7000(4fc00000) ret 0.
  507. [ 2.604499] [mmc-msg] sdc0 Probe: base:0xf00dc000 irq:64 sg_cpu:ffdf7000(4fc00000) ret 0.
  508. [mmc_pm]: failed to fetch sdio card configuration!
  509. [ 2.617241] [mmc_pm]: failed to fetch sdio card configuration!
  510. <6>sunxi_leds driver init
  511. [ 2.625423] sunxi_leds driver init
  512. <7>Registered led device: green:ph20:led1
  513. <7>Registered led device: blue:ph21:led2
  514. <6>ledtrig-cpu: registered to indicate activity on CPUs
  515. [ 2.641643] ledtrig-cpu: registered to indicate activity on CPUs
  516. <6>usbcore: registered new interface driver usbhid
  517. [ 2.652778] usbcore: registered new interface driver usbhid
  518. <6>usbhid: USB HID core driver
  519. [ 2.661155] usbhid: USB HID core driver
  520. <6>ashmem: initialized
  521. [ 2.667588] ashmem: initialized
  522. <6>logger: created 256K log 'log_main'
  523. [ 2.674353] logger: created 256K log 'log_main'
  524. <6>logger: created 256K log 'log_events'
  525. [ 2.682649] logger: created 256K log 'log_events'
  526. <6>logger: created 256K log 'log_radio'
  527. [ 2.691034] logger: created 256K log 'log_radio'
  528. <6>logger: created 256K log 'log_system'
  529. [ 2.699417] logger: created 256K log 'log_system'
  530. <6>IPv4 over IPv4 tunneling driver
  531. [ 2.712584] IPv4 over IPv4 tunneling driver
  532. <6>TCP: bic registered
  533. [ 2.719591] TCP: bic registered
  534. <6>TCP: cubic registered
  535. [ 2.725000] TCP: cubic registered
  536. <6>TCP: westwood registered
  537. [ 2.730867] TCP: westwood registered
  538. <6>TCP: highspeed registered
  539. [ 2.737048] TCP: highspeed registered
  540. <6>TCP: hybla registered
  541. [ 2.742980] TCP: hybla registered
  542. <6>TCP: htcp registered
  543. [ 2.748466] TCP: htcp registered
  544. <6>TCP: vegas registered
  545. [ 2.753963] TCP: vegas registered
  546. <6>TCP: veno registered
  547. [ 2.759461] TCP: veno registered
  548. <6>TCP: scalable registered
  549. [ 2.765207] TCP: scalable registered
  550. <6>TCP: lp registered
  551. [ 2.770788] TCP: lp registered
  552. <6>TCP: yeah registered
  553. [ 2.776015] TCP: yeah registered
  554. <6>TCP: illinois registered
  555. [ 2.781772] TCP: illinois registered
  556. <6>Initializing XFRM netlink socket
  557. [ 2.788558] Initializing XFRM netlink socket
  558. <6>NET: Registered protocol family 10
  559. [ 2.796920] NET: Registered protocol family 10
  560. <6>NET: Registered protocol family 17
  561. [ 2.805851] NET: Registered protocol family 17
  562. <6>NET: Registered protocol family 15
  563. [ 2.813761] NET: Registered protocol family 15
  564. <5>Registering the dns_resolver key type
  565. [ 2.821906] Registering the dns_resolver key type
  566. <6>VFP support v0.3: [ 2.828585] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  567. implementor 41 architecture 2 part 30 variant 7 rev 4
  568. <5>Registering SWP/SWPB emulation handler
  569. [ 2.844804] Registering SWP/SWPB emulation handler
  570. <4>axp20_buck2: Failed to create debugfs directory
  571. [ 2.854210] axp20_buck2: Failed to create debugfs directory
  572. <6>[cpu_freq] INF:-------------------V-F Table-------------------
  573. [ 2.865939] [cpu_freq] INF:-------------------V-F Table-------------------
  574. <6>[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  575. [ 2.877865] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  576. <6>[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
  577. [ 2.888998] [cpu_freq] INF: voltage = 1425mv frequency = 912MHz
  578. <6>[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
  579. [ 2.900129] [cpu_freq] INF: voltage = 1350mv frequency = 864MHz
  580. <6>[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
  581. [ 2.911261] [cpu_freq] INF: voltage = 1250mv frequency = 720MHz
  582. <6>[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
  583. [ 2.922394] [cpu_freq] INF: voltage = 1150mv frequency = 528MHz
  584. <6>[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
  585. [ 2.933528] [cpu_freq] INF: voltage = 1100mv frequency = 312MHz
  586. <6>[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  587. [ 2.944660] [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  588. <6>[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  589. [ 2.955795] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  590. <6>[cpu_freq] INF:-----------------------------------------------
  591. [ 2.967706] [cpu_freq] INF:-----------------------------------------------
  592. <6>[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz
  593. [ 2.984395] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz
  594. <6>registered taskstats version 1
  595. [ 2.998933] registered taskstats version 1
  596. <6>I2C: i2c-3: HDMI I2C adapter
  597. [ 3.007780] I2C: i2c-3: HDMI I2C adapter
  598. <6>disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
  599. [ 3.043017] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
  600. <6>[mmc-msg] mmc 0 detect change, present 1
  601. [ 3.585411] [mmc-msg] mmc 0 detect change, present 1
  602. <6>Console: switching to colour frame buffer device 160x45
  603. [ 3.611907] Console: switching to colour frame buffer device 160x45
  604. <4>axp20_buck3: incomplete constraints, leaving on
  605. [ 3.639967] axp20_buck3: incomplete constraints, leaving on
  606. <4>axp20_buck2: incomplete constraints, leaving on
  607. [ 3.650309] axp20_buck2: incomplete constraints, leaving on
  608. <4>axp20_ldo4: incomplete constraints, leaving on
  609. [ 3.660558] axp20_ldo4: incomplete constraints, leaving on
  610. <4>axp20_ldo3: incomplete constraints, leaving on
  611. [ 3.670712] axp20_ldo3: incomplete constraints, leaving on
  612. <4>axp20_ldo2: incomplete constraints, leaving on
  613. [ 3.680869] axp20_ldo2: incomplete constraints, leaving on
  614. <4>axp20_ldo1: incomplete constraints, leaving on
  615. [ 3.691025] axp20_ldo1: incomplete constraints, leaving on
  616. <6>console [netcon0] enabled
  617. [ 3.709317] console [netcon0] enabled
  618. <6>netconsole: network logging started
  619. [ 3.716461] netconsole: network logging started
  620. <6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  621. [ 3.728507] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  622. <6>ALSA device list:
  623. [ 3.739040] ALSA device list:
  624. <6> #0: sunxi-CODEC Audio Codec
  625. [ 3.745049] #0: sunxi-CODEC Audio Codec
  626. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  627. [ 4.094450] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  628. <6>[mmc-msg] sdc0 power on
  629. [ 4.105879] [mmc-msg] sdc0 power on
  630. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  631. [ 4.134860] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  632. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  633. [ 4.149153] [mmc-msg] sdc0 set round clock 400000, src 24000000
  634. <3>[mmc-err] smc 0 err, cmd 52, RTO
  635. [ 4.232157] [mmc-err] smc 0 err, cmd 52, RTO
  636. <3>[mmc-err] smc 0 err, cmd 52, RTO
  637. [ 4.240646] [mmc-err] smc 0 err, cmd 52, RTO
  638. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  639. [ 4.253345] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  640. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  641. [ 4.273454] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  642. <3>[mmc-err] smc 0 err, cmd 5, RTO
  643. [ 4.288194] [mmc-err] smc 0 err, cmd 5, RTO
  644. <3>[mmc-err] smc 0 err, cmd 5, RTO
  645. [ 4.296501] [mmc-err] smc 0 err, cmd 5, RTO
  646. <3>[mmc-err] smc 0 err, cmd 5, RTO
  647. [ 4.304803] [mmc-err] smc 0 err, cmd 5, RTO
  648. <3>[mmc-err] smc 0 err, cmd 5, RTO
  649. [ 4.313106] [mmc-err] smc 0 err, cmd 5, RTO
  650. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  651. [ 4.326353] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  652. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  653. [ 4.344091] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  654. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  655. [ 4.364196] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  656. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  657. [ 4.453844] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  658. <6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  659. [ 4.471579] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  660. <6>[mmc-msg] sdc0 set round clock 42857143, src 600000000
  661. [ 4.486210] [mmc-msg] sdc0 set round clock 42857143, src 600000000
  662. <6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  663. [ 4.560885] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  664. <6>mmc0: new high speed SDHC card at address e624
  665. [ 4.574814] mmc0: new high speed SDHC card at address e624
  666. <6>mmcblk0: mmc0:e624 SU04G 3.69 GiB
  667. [ 4.584221] mmcblk0: mmc0:e624 SU04G 3.69 GiB
  668. <6> mmcblk0: p1 p2
  669. [ 4.592785] mmcblk0: p1 p2
  670. <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  671. [ 6.071678] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  672. <6>ata1.00: ATA-8: SAMSUNG HM501II, 2AJ10001, max UDMA/133
  673. [ 6.088963] ata1.00: ATA-8: SAMSUNG HM501II, 2AJ10001, max UDMA/133
  674. <6>ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  675. [ 6.100894] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  676. <6>ata1.00: configured for UDMA/133
  677. [ 6.116696] ata1.00: configured for UDMA/133
  678. <5>scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM501II 2AJ1 PQ: 0 ANSI: 5
  679. [ 6.143963] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM501II 2AJ1 PQ: 0 ANSI: 5
  680. <5>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  681. [ 6.159146] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  682. <5>sd 0:0:0:0: [sda] Write Protect is off
  683. [ 6.170635] sd 0:0:0:0: [sda] Write Protect is off
  684. <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  685. <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  686. [ 6.187530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  687. <6> sda: sda1 sda2
  688. [ 6.211156] sda: sda1 sda2
  689. <5>sd 0:0:0:0: [sda] Attached SCSI disk
  690. [ 6.218769] sd 0:0:0:0: [sda] Attached SCSI disk
  691. <3>EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  692. [ 6.232847] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  693. <3>EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  694. [ 6.251270] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  695. <6>EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  696. [ 6.311624] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  697. <6>VFS: Mounted root (ext4 filesystem) on device 179:2.
  698. [ 6.324763] VFS: Mounted root (ext4 filesystem) on device 179:2.
  699. <6>devtmpfs: mounted
  700. [ 6.335185] devtmpfs: mounted
  701. <6>Freeing init memory: 228K
  702. [ 6.341067] Freeing init memory: 228K
  703. INIT: version 2.88 booting
  704.  
  705. OpenRC 0.12.4 is starting up Gentoo Linux (armv7l)
  706.  
  707. * Mounting /proc ...
  708. [ ok ]
  709. * Mounting /run ...
  710. * /run/openrc: creating directory
  711. * /run/lock: creating directory
  712. * /run/lock: correcting owner
  713. * Using /dev mounted from kernel ...
  714. [ ok ]
  715. * Mounting /dev/pts ...
  716. [ ok ]
  717. * Mounting /dev/shm ...
  718. [ ok ]
  719. * Creating list of required static device nodes for the current kernel ...
  720. Warning: /lib/modules/3.4.43+/modules.devname not found - ignoring
  721. [ ok ]
  722. * Mounting /sys ...
  723. [ ok ]
  724. * Mounting debug filesystem ...
  725. [ ok ]
  726. * Mounting config filesystem ...
  727. [ ok ]
  728. * Mounting cgroup filesystem ...
  729. [ ok ]
  730. * Mounting fuse control filesystem ...
  731. [ ok ]
  732. * setting up tmpfiles.d entries for /dev ...
  733. [ ok ]
  734. * Starting udev ...
  735. <30>systemd-udevd[249]: starting version 216
  736. [ ok ]
  737. * Generating a rule to create a /dev/root symlink ...
  738. [ ok ]
  739. * Populating /dev with existing devices through uevents ...
  740. [ ok ]
  741. * Waiting for uevents to be processed ...
  742. [ ok ]
  743. * Checking local filesystems ...
  744. /dev/mmcblk0p1: clean, 15/3072 files, 10030/12288 blocks
  745. [ ok ]
  746. * Remounting filesystems ...
  747. [ ok ]
  748. * Updating /etc/mtab ...
  749. [ ok ]
  750. * Mounting local filesystems ...
  751. [ ok ]
  752. * Configuring kernel parameters ...
  753. [ ok ]
  754. * Creating user login records ...
  755. [ ok ]
  756. * Wiping /tmp directory ...
  757. [ ok ]
  758. /etc/init.d/bootmisc: line 130: 432 Segmentation fault dmesg > /var/log/dmesg
  759. * Setting hostname to cubieboard2-1 ...
  760. [ ok ]
  761. * Bringing up network interface lo ...
  762. [ ok ]
  763. * Bringing up interface eth0
  764. * Caching network module dependencies
  765. need firewalld
  766. <6>sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  767. * 192.168.158.191/24 ...
  768. [ ok ]
  769. * Adding routes
  770. * default via 192.168.158.1 ...
  771. [ ok ]
  772. * Mounting misc binary format filesystem ...
  773. [ ok ]
  774. * Loading custom binary format handlers ...
  775. [ ok ]
  776. * Starting sshd ...
  777. [ ok ]
  778. * setting up tmpfiles.d entries ...
  779. [ ok ]
  780. * Initializing random number generator ...
  781. [ ok ]
  782. INIT: Entering runlevel: 3
  783. * Setting clock via the NTP client 'ntpdate' ...
  784. <7>eth0: no IPv6 routers present
  785. [ ok ]
  786. * Starting ntpd ...
  787. [ ok ]
  788. * Starting local
  789. [ ok ]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement