Welcome to Dell Easy Setup Wizard

The Setup Wizard guides you through the initial switch configuration, and
gets you up and running as quickly as possible. You can skip the setup
wizard, and enter CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard within 60 seconds,
otherwise the system will continue with normal operation using the default
system configuration.Note: You can exit the setup wizard at any point
by entering [ctrl+z].

Would you like to run the setup wizard (you must answer this question within
60 seconds)? [Y/N] y

Step 1:
The system is not setup for SNMP management by default. To manage the
switch using SNMP (required for Dell Network Manager) you can
.   Set up the initial SNMP version 2 account now.
.   Return later and setup other SNMP accounts. (For more information on
    setting up an SNMP version 1 or 3 account, see the user documentation).
Would you like to setup the SNMP management interface now? [Y/N]
Would you like to setup the SNMP management interface now? [Y/N] n

Step 2:
Now we need to setup your initial privilege (Level 15) user account. This
account is used to login to the CLI and Web interface. You may setup other
accounts and change privilege levels later. For more information on setting
up user accounts and changing privilege levels, see the user documentation.
To setup a user account:

Please enter the user name. [admin]:admin
Please enter the user password:
Please reenter the user password:

Step 3:
Next, an IP address is setup. The IP address is defined on the default VLAN
(VLAN #1), of which all ports are members. This is the IP address you use to
access the CLI, Web interface, or SNMP interface for the switch.
Optionally you may request that the system automatically retrieve an IP
address from the network via DHCP (this requires that you have a DHCP
server running on the network).
To setup an IP address:

Please enter the IP address of the device (A.B.C.D) or enter "DHCP" (without
the quotes) to automatically request an IP address from the network
DHCP server. [192.168.2.1]: DHCP
This is the configuration information that has been collected:

User Account setup = admin
Password = ********
Management IP address = DHCP 255.255.255.0

Step 5:
If the information is correct, please select (Y) to save the configuration,
and copy to the start-up configuration file. If the information is incorrect,
select (N) to discard configuration and restart the wizard: [Y/N] y

Thank you for using Dell Easy Set up Wizard. You will now enter CLI mode.

Applying Interface configuration, please wait ...