Guest User

Untitled

a guest
Apr 14th, 2016
68
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot SPL 2016.05-rc1-armbian (Apr 13 2016 - 11:11:26)
  2. DRAM: 512 MiB
  3. Failed to set core voltage! Can't set CPU frequency
  4. Trying to boot from MMC1
  5.  
  6.  
  7. U-Boot 2016.05-rc1-armbian (Apr 13 2016 - 11:11:26 +0530) Allwinner Technology
  8.  
  9. CPU:   Allwinner H3 (SUN8I 1680)
  10. Model: Xunlong Orange Pi PC
  11. I2C:   ready
  12. DRAM:  512 MiB
  13. MMC:   SUNXI SD/MMC: 0
  14. *** Warning - bad CRC, using default environment
  15.  
  16. In:    serial
  17. Out:   serial
  18. Err:   serial
  19. Net:   No ethernet found.
  20. starting USB...
  21. USB0:   USB EHCI 1.00
  22. USB1:   USB OHCI 1.0
  23. USB2:   USB EHCI 1.00
  24. USB3:   USB OHCI 1.0
  25. USB4:   USB EHCI 1.00
  26. USB5:   USB OHCI 1.0
  27. scanning bus 0 for devices... ERROR: Invalid USB EP length (9)
  28. ERROR: Invalid USB EP length (9)
  29. 2 USB Device(s) found
  30. scanning bus 2 for devices... 1 USB Device(s) found
  31. scanning bus 4 for devices... 1 USB Device(s) found
  32. Hit any key to stop autoboot:  0
  33. => printenv
  34. baudrate=115200
  35. boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
  36. boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootarm.efi; bootefi ${kernel_addr_r}
  37. boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
  38. boot_net_usb_start=usb start
  39. boot_prefixes=/ /boot/
  40. boot_script_dhcp=boot.scr.uimg
  41. boot_scripts=boot.scr.uimg boot.scr
  42. boot_targets=fel mmc0 usb0 pxe dhcp
  43. bootcmd=run distro_bootcmd
  44. bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi
  45. bootcmd_fel=if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then echo '(FEL boot)'; source ${fel_scriptaddr}; fi
  46. bootcmd_mmc0=setenv devnum 0; run mmc_boot
  47. bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
  48. bootcmd_usb0=setenv devnum 0; run usb_boot
  49. bootdelay=2
  50. bootm_size=0xa000000
  51. console=ttyS0,115200
  52. dfu_alt_info_ram=kernel ram 0x42000000 0x1000000;fdt ram 0x43000000 0x100000;ramdisk ram 0x43300000 0x4000000
  53. distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
  54. efi_dtb_prefixes=/ /dtb/ /dtb/current/
  55. ethaddr=02:20:28:00:00:00
  56. fdt_addr_r=0x43000000
  57. fdtcontroladdr=5bf42168
  58. fdtfile=sun8i-h3-orangepi-pc.dtb
  59. kernel_addr_r=0x42000000
  60. load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${fdtfile}; fdt addr ${fdt_addr_r}
  61. mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
  62. preboot=usb start
  63. pxefile_addr_r=0x43200000
  64. ramdisk_addr_r=0x43300000
  65. scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
  66. scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
  67. scan_dev_for_efi=for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootarm.efi; then echo Found EFI removable media binary efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi;
  68. scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
  69. scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
  70. scriptaddr=0x43100000
  71. serial#=0200462028000000
  72. stderr=serial
  73. stdin=serial,usbkbd
  74. stdout=serial
  75. usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
  76.  
  77. Environment size: 3154/131068 bytes
RAW Paste Data Copied