Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.67-1-pve] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar SE Serial ATA
- Device Model: WDC WD1200JS-00MHB0
- Serial Number: WD-WCANM5308677
- Firmware Version: 02.01C03
- User Capacity: 120,034,123,776 bytes [120 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
- Local Time is: Thu Aug 10 23:18:06 2017 +09
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 3660) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 46) minutes.
- Conveyance self-test routine
- recommended polling time: ( 6) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0003 180 180 021 Pre-fail Always - 3983
- 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5819
- 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 23884
- 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5784
- 190 Airflow_Temperature_Cel 0x0022 050 039 045 Old_age Always In_the_past 50
- 194 Temperature_Celsius 0x0022 097 086 000 Old_age Always - 50
- 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 3
- 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 2
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 2 occurred at disk power-on lifetime: 22469 hours (936 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 09 0c 1c e7 Error: UNC at LBA = 0x071c0c09 = 119278601
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 08 0c 1c 07 00 00:32:57.217 READ DMA
- c8 00 2a 00 87 0e 07 00 00:32:57.209 READ DMA
- ca 00 60 10 fb b8 07 00 00:32:57.209 WRITE DMA
- ca 00 18 f8 ac 48 07 00 00:32:57.208 WRITE DMA
- ca 00 0e 58 da 55 05 00 00:32:57.208 WRITE DMA
- Error 1 occurred at disk power-on lifetime: 22469 hours (936 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 09 0c 1c e0 Error: UNC at LBA = 0x001c0c09 = 1838089
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 00 07 1c 07 00 00:32:55.148 READ DMA EXT
- c8 00 98 00 11 37 09 00 00:32:55.133 READ DMA
- 25 00 80 80 03 1c 07 00 00:32:55.125 READ DMA EXT
- 25 00 80 00 fd 1b 07 00 00:32:55.110 READ DMA EXT
- 25 00 80 80 f7 1b 07 00 00:32:55.082 READ DMA EXT
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Add Comment
Please, Sign In to add comment
