API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 20th, 2014
453
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.02 KB | None | 0 0
raw download clone embed print report
  1. OpenELEC:~ # dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 3.16.3 (stephan@buildserver.fritz.box) (gcc version 4.9.1 (GCC) ) #1 PREEMPT Sat Oct 4 09:49:44 CEST 2014
  4. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [ 0.000000] Machine: BCM2708
  7. [ 0.000000] cma: CMA: reserved 8 MiB at 0f800000
  8. [ 0.000000] Memory policy: Data cache writeback
  9. [ 0.000000] On node 0 totalpages: 65536
  10. [ 0.000000] free_area_init_node: node 0, pgdat c09fd4d8, node_mem_map cf5f4000
  11. [ 0.000000] Normal zone: 512 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
  14. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  15. [ 0.000000] pcpu-alloc: [0] 0
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  17. [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708.boardrev=0x1000010 bcm2708.serial=0x472f18d0 smsc95xx.macaddr=B8:27:EB:2F:18:D0 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
  18. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  19. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  20. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  21. [ 0.000000] Memory: 241028K/262144K available (6395K kernel code, 264K rwdata, 1416K rodata, 2120K init, 376K bss, 21116K reserved)
  22. [ 0.000000] Virtual kernel memory layout:
  23. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  24. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  25. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  26. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  27. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  28. [ 0.000000] .text : 0xc0008000 - 0xc07a8f34 (7812 kB)
  29. [ 0.000000] .init : 0xc07a9000 - 0xc09bb264 (2121 kB)
  30. [ 0.000000] .data : 0xc09bc000 - 0xc09fe108 ( 265 kB)
  31. [ 0.000000] .bss : 0xc09fe114 - 0xc0a5c4b0 ( 377 kB)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] Preemptible hierarchical RCU implementation.
  34. [ 0.000000] Offload RCU callbacks from all CPUs
  35. [ 0.000000] Offload RCU callbacks from CPUs: 0.
  36. [ 0.000000] NR_IRQS:394
  37. [ 0.000020] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
  38. [ 0.000056] Switching to timer-based delay loop
  39. [ 0.000281] Console: colour dummy device 80x30
  40. [ 0.000473] console [tty0] enabled
  41. [ 0.000497] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.08 BogoMIPS (lpj=3333)
  42. [ 0.000519] pid_max: default: 32768 minimum: 301
  43. [ 0.000668] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.000689] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.001503] CPU: Testing write buffer coherency: ok
  46. [ 0.001904] Setting up static identity map for 0x644800 - 0x644838
  47. [ 0.004448] devtmpfs: initialized
  48. [ 0.020651] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  49. [ 0.021198] xor: measuring software checksum speed
  50. [ 0.053751] arm4regs : 973.200 MB/sec
  51. [ 0.087168] 8regs : 492.000 MB/sec
  52. [ 0.120582] 32regs : 598.800 MB/sec
  53. [ 0.120599] xor: using function: arm4regs (973.200 MB/sec)
  54. [ 0.121955] NET: Registered protocol family 16
  55. [ 0.127376] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  56. [ 0.128211] cpuidle: using governor ladder
  57. [ 0.128244] cpuidle: using governor menu
  58. [ 0.128686] bcm2708.uart_clock = 3000000
  59. [ 0.130934] mailbox: Broadcom VideoCore Mailbox driver
  60. [ 0.131036] bcm2708_vcio: mailbox at f200b880
  61. [ 0.131148] bcm_power: Broadcom power driver
  62. [ 0.131168] bcm_power_open() -> 0
  63. [ 0.131178] bcm_power_request(0, 8)
  64. [ 0.631896] bcm_mailbox_read -> 00000080, 0
  65. [ 0.631914] bcm_power_request -> 0
  66. [ 0.632064] Serial: AMBA PL011 UART driver
  67. [ 0.632247] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  68. [ 0.722604] raid6: int32x1 46 MB/s
  69. [ 0.779875] raid6: int32x2 70 MB/s
  70. [ 0.836570] raid6: int32x4 94 MB/s
  71. [ 0.893353] raid6: int32x8 99 MB/s
  72. [ 0.893372] raid6: using algorithm int32x8 (99 MB/s)
  73. [ 0.893382] raid6: using intx1 recovery algorithm
  74. [ 0.894090] SCSI subsystem initialized
  75. [ 0.894548] usbcore: registered new interface driver usbfs
  76. [ 0.894660] usbcore: registered new interface driver hub
  77. [ 0.894916] usbcore: registered new device driver usb
  78. [ 0.896894] Switched to clocksource stc
  79. [ 0.910886] NET: Registered protocol family 2
  80. [ 0.912178] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  81. [ 0.912242] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  82. [ 0.912299] TCP: Hash tables configured (established 2048 bind 2048)
  83. [ 0.912381] TCP: reno registered
  84. [ 0.912404] UDP hash table entries: 256 (order: 0, 4096 bytes)
  85. [ 0.912436] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  86. [ 0.912749] NET: Registered protocol family 1
  87. [ 0.913261] RPC: Registered named UNIX socket transport module.
  88. [ 0.913284] RPC: Registered udp transport module.
  89. [ 0.913296] RPC: Registered tcp transport module.
  90. [ 0.913305] RPC: Registered tcp NFSv4.1 backchannel transport module.
  91. [ 1.109884] bcm2708_dma: DMA manager at f2007000
  92. [ 1.110094] bcm2708_gpio: bcm2708_gpio_probe c09c8720
  93. [ 1.110646] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  94. [ 1.112002] futex hash table entries: 256 (order: -1, 3072 bytes)
  95. [ 1.127578] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  96. [ 1.130771] NFS: Registering the id_resolver key type
  97. [ 1.130864] Key type id_resolver registered
  98. [ 1.130880] Key type id_legacy registered
  99. [ 1.130929] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  100. [ 1.133311] JFS: nTxBlock = 1947, nTxLock = 15576
  101. [ 1.134525] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  102. [ 1.138663] msgmni has been set to 486
  103. [ 1.142151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  104. [ 1.142193] io scheduler noop registered (default)
  105. [ 1.142218] io scheduler deadline registered
  106. [ 1.142279] io scheduler cfq registered
  107. [ 1.143873] BCM2708FB: allocated DMA memory 4fc00000
  108. [ 1.143943] BCM2708FB: allocated DMA channel 0 @ f2007000
  109. [ 1.165612] Console: switching to colour frame buffer device 200x75
  110. [ 1.183094] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  111. [ 1.183498] uart-pl011 dev:f1: no DMA platform data
  112. [ 1.183537] vc-cma: Videocore CMA driver
  113. [ 1.183628] vc-cma: vc_cma_base = 0x00000000
  114. [ 1.183645] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  115. [ 1.183656] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  116. [ 1.194533] brd: module loaded
  117. [ 1.194790] loop: module loaded
  118. [ 1.195154] nbd: registered device at major 43
  119. [ 1.205774] vchiq: vchiq_init_state: slot_zero = 0xcf800000, is_master = 0
  120. [ 1.206841] Loading iSCSI transport class v2.0-870.
  121. [ 1.207772] iscsi: registered transport (tcp)
  122. [ 1.208887] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
  123. [ 1.209826] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  124. [ 1.209992] tun: Universal TUN/TAP device driver, 1.6
  125. [ 1.210009] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  126. [ 1.210592] PPP generic driver version 2.4.2
  127. [ 1.211214] usbcore: registered new interface driver smsc95xx
  128. [ 1.211426] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  129. [ 1.411852] Core Release: 2.80a
  130. [ 1.411887] Setting default values for core params
  131. [ 1.411934] Finished setting default values for core params
  132. [ 1.612228] Using Buffer DMA mode
  133. [ 1.612256] Periodic Transfer Interrupt Enhancement - disabled
  134. [ 1.612268] Multiprocessor Interrupt Enhancement - disabled
  135. [ 1.612281] OTG VER PARAM: 0, OTG VER FLAG: 0
  136. [ 1.612298] Dedicated Tx FIFOs mode
  137. [ 1.612722] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xcfc14000 dma = 0x4fc14000 len=9024
  138. [ 1.612761] FIQ FSM acceleration enabled for :
  139. [ 1.612761] Non-periodic Split Transactions
  140. [ 1.612761] Periodic Split Transactions
  141. [ 1.612761] High-Speed Isochronous Endpoints
  142. [ 1.612789] dwc_otg: Microframe scheduler enabled
  143. [ 1.612852] WARN::hcd_init:473: FIQ at 0xc04e64f4
  144. [ 1.612871] WARN::hcd_init:474: FIQ ASM at 0xc04e67d0 length 36
  145. [ 1.612904] WARN::hcd_init:500: MPHI regs_base at 0xd0936000
  146. [ 1.612937] dwc_otg bcm2708_usb: DWC OTG Controller
  147. [ 1.612997] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  148. [ 1.613056] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  149. [ 1.613100] Init: Port Power? op_state=1
  150. [ 1.613112] Init: Power Port (0)
  151. [ 1.613415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  152. [ 1.613439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  153. [ 1.613455] usb usb1: Product: DWC OTG Controller
  154. [ 1.613469] usb usb1: Manufacturer: Linux 3.16.3 dwc_otg_hcd
  155. [ 1.613482] usb usb1: SerialNumber: bcm2708_usb
  156. [ 1.614511] hub 1-0:1.0: USB hub found
  157. [ 1.614600] hub 1-0:1.0: 1 port detected
  158. [ 1.615147] dwc_otg: FIQ enabled
  159. [ 1.615164] dwc_otg: NAK holdoff enabled
  160. [ 1.615175] dwc_otg: FIQ split-transaction FSM enabled
  161. [ 1.615231] Module dwc_common_port init
  162. [ 1.615622] usbcore: registered new interface driver uas
  163. [ 1.615861] usbcore: registered new interface driver usb-storage
  164. [ 1.616237] mousedev: PS/2 mouse device common for all mice
  165. [ 1.616507] i2c /dev entries driver
  166. [ 1.616698] bcm2708_i2c_init_pinmode(0,0)
  167. [ 1.616718] bcm2708_i2c_init_pinmode(0,1)
  168. [ 1.617339] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
  169. [ 1.617422] bcm2708_i2c_init_pinmode(1,2)
  170. [ 1.617439] bcm2708_i2c_init_pinmode(1,3)
  171. [ 1.618232] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
  172. [ 1.619283] bcm2835-cpufreq: min=700000 max=900000 cur=700000
  173. [ 1.619491] bcm2835-cpufreq: switching to governor ondemand
  174. [ 1.619512] bcm2835-cpufreq: switching to governor ondemand
  175. [ 1.621006] sdhci: Secure Digital Host Controller Interface driver
  176. [ 1.621025] sdhci: Copyright(c) Pierre Ossman
  177. [ 1.621262] DMA channels allocated for the MMC driver
  178. [ 1.646932] Load BCM2835 MMC driver
  179. [ 1.647193] sdhci-pltfm: SDHCI platform and OF driver helper
  180. [ 1.647606] hidraw: raw HID events driver (C) Jiri Kosina
  181. [ 1.649879] usbcore: registered new interface driver usbhid
  182. [ 1.649894] usbhid: USB HID core driver
  183. [ 1.650160] TCP: cubic registered
  184. [ 1.659049] NET: Registered protocol family 10
  185. [ 1.662349] NET: Registered protocol family 17
  186. [ 1.664679] Key type dns_resolver registered
  187. [ 1.676977] Btrfs loaded
  188. [ 1.684098] Freeing unused kernel memory: 2120K (c07a9000 - c09bb000)
  189. [ 1.694997] mmc0: host does not support reading read-only switch. assuming write-enable.
  190. [ 1.697306] mmc0: new high speed SDHC card at address 1234
  191. [ 1.700440] mmcblk0: mmc0:1234 SA08G 7.21 GiB
  192. [ 1.702169] mmcblk0: p1 p2
  193. [ 1.813858] Indeed it is in host mode hprt0 = 00021501
  194. [ 2.003720] usb 1-1: new high-speed USB device number 2 using dwc_otg
  195. [ 2.003915] Indeed it is in host mode hprt0 = 00001101
  196. [ 2.227334] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  197. [ 2.227363] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  198. [ 2.228166] hub 1-1:1.0: USB hub found
  199. [ 2.228325] hub 1-1:1.0: 5 ports detected
  200. [ 2.507121] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  201. [ 2.600680] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  202. [ 2.600709] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  203. [ 2.603647] smsc95xx v1.0.4
  204. [ 2.650749] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2f:18:d0
  205. [ 2.714823] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  206. [ 2.715543] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  207. [ 2.727925] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
  208. [ 2.730401] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
  209. [ 2.829454] usb 1-1.4: New USB device found, idVendor=046e, idProduct=5578
  210. [ 2.829478] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  211. [ 2.829492] usb 1-1.4: Product: USB MCE Cordless Remote Control.
  212. [ 2.829505] usb 1-1.4: Manufacturer: BTC
  213. [ 2.834817] input: BTC USB MCE Cordless Remote Control. as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046E:5578.0001/input/input0
  214. [ 2.835470] topseed 0003:046E:5578.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB MCE Cordless Remote Control.] on usb-bcm2708_usb-1.4/input0
  215. [ 2.844565] input: BTC USB MCE Cordless Remote Control. as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046E:5578.0002/input/input1
  216. [ 2.845400] topseed 0003:046E:5578.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [BTC USB MCE Cordless Remote Control.] on usb-bcm2708_usb-1.4/input1
  217. [ 3.512427] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
  218. [ 3.898447] random: nonblocking pool is initialized
  219. [ 5.156723] bcm2708_rng_init=d09d4000
  220. [ 6.073371] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CPU DAI bcm2708-i2s.0 not registered
  221. [ 6.073448] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  222. [ 6.073484] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  223. [ 6.087871] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
  224. [ 6.098041] systemd[1]: Failed to start Load Kernel Modules.
  225. [ 6.098193] systemd[1]: Unit systemd-modules-load.service entered failed state.
  226. [ 6.858236] systemd-journald[179]: Received request to flush runtime journal from PID 1
  227. [ 6.939586] systemd-udevd[185]: starting version 216
  228. [ 7.154499] Console: switching to colour dummy device 80x30
  229. [ 8.651487] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CPU DAI bcm2708-i2s.0 not registered
  230. [ 8.651566] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  231. [ 8.651603] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  232. [ 8.669188] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
  233. [ 8.669469] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CODEC pcm512x.1-004d not registered
  234. [ 8.669537] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  235. [ 8.669578] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  236. [ 8.676838] pcm512x 1-004d: No SCLK, using BCLK: -2
  237. [ 8.687392] pcm512x 1-004c: Failed to reset device: -5
  238. [ 8.687613] pcm512x: probe of 1-004c failed with error -5
  239. [ 8.692715] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: pcm512x-hifi <-> bcm2708-i2s.0 mapping ok
  240. [ 9.878344] input: eventlircd as /devices/virtual/input/input2
  241. [ 10.556278] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  242. [ 10.558954] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  243. [ 12.072216] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  244. [ 12.081587] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  245. OpenELEC:~ # aplay -l
  246. **** List of PLAYBACK Hardware Devices ****
  247. card 0: sndrpihifiberry [snd_rpi_hifiberry_dacplus], device 0: HiFiBerry DAC+ HiFi pcm512x-hifi-0 []
  248. Subdevices: 1/1
  249. Subdevice #0: subdevice #0
  250. OpenELEC:~ # lsmod
  251. Module Size Used by
  252. snd_soc_wm8804 6900 0
  253. snd_soc_bcm2708_i2s 5577 2
  254. snd_soc_pcm512x_i2c 1481 1
  255. snd_soc_pcm512x 6092 1 snd_soc_pcm512x_i2c
  256. snd_soc_tas5713 4760 0
  257. regmap_mmio 2181 1 snd_soc_bcm2708_i2s
  258. regmap_spi 1465 1 snd_soc_wm8804
  259. regmap_i2c 1974 3 snd_soc_wm8804,snd_soc_pcm512x_i2c,snd_soc_tas5713
  260. snd_soc_hifiberry_dacplus 2059 0
  261. snd_soc_core 100609 5 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_tas5713,snd_soc_hifiberry_dacplus,snd_soc_bcm2708_i2s
  262. snd_compress 7084 1 snd_soc_core
  263. snd_pcm_dmaengine 2927 1 snd_soc_core
  264. snd_pcm 62712 2 snd_soc_core,snd_pcm_dmaengine
  265. snd_timer 17660 1 snd_pcm
  266. snd 41549 4 snd_soc_core,snd_timer,snd_pcm,snd_compress
  267. bcm2708_rng 808 0
  268. OpenELEC:~ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!