API tools faq
paste
antony_king_bwt

SolidRun LX2160 Bad Reboot

antony_king_bwt
Nov 14th, 2022
41
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 63.52 KB | None | 0 0
raw download clone embed print report
  1. [ 330.775992] reboot: Restarting system
  2. NOTICE: BL2: v2.4(release):LSDK-21.08-7-g685790bba
  3. NOTICE: BL2: Built : 10:00:46, Jun 9 2022
  4. NOTICE: UDIMM KHX3200C20S4/16GX
  5. NOTICE: DDR PMU Hardware version-0x1210
  6. NOTICE: DDR PMU Firmware vision-0x1001 (vA-2019.04)
  7. NOTICE: DDR4 UDIMM with 2-rank 64-bit bus (x8)
  8.  
  9. NOTICE: 32 GB DDR4, 64-bit, CL=20, ECC off, 256B, CS0+CS1
  10. NOTICE: BL2: Booting BL31
  11. NOTICE: BL31: v2.4(release):LSDK-21.08-7-g685790bba
  12. NOTICE: BL31: Built : 10:00:46, Jun 9 2022
  13. NOTICE: Welcome to lx2160acex7 BL31 Phase
  14.  
  15.  
  16. U-Boot 2021.04-00031-gf336a6048 (Jun 09 2022 - 10:00:42 +0000)
  17.  
  18. SoC: LX2160ACE Rev2.0 (0x87360020)
  19. Clock Configuration:
  20. CPU0(A72):2000 MHz CPU1(A72):2000 MHz CPU2(A72):2000 MHz
  21. CPU3(A72):2000 MHz CPU4(A72):2000 MHz CPU5(A72):2000 MHz
  22. CPU6(A72):2000 MHz CPU7(A72):2000 MHz CPU8(A72):2000 MHz
  23. CPU9(A72):2000 MHz CPU10(A72):2000 MHz CPU11(A72):2000 MHz
  24. CPU12(A72):2000 MHz CPU13(A72):2000 MHz CPU14(A72):2000 MHz
  25. CPU15(A72):2000 MHz
  26. Bus: 700 MHz DDR: 3200 MT/s
  27. Reset Configuration Word (RCW):
  28. 00000000: 50838338 24500050 00000000 00000000
  29. 00000010: 00000000 0e010000 00000000 00000000
  30. 00000020: 10c001a0 00002580 00000000 00000000
  31. 00000030: 09240000 00000000 00000000 00000000
  32. 00000040: 00000000 00000000 00000000 00000000
  33. 00000050: 00000000 00000000 00000000 00000000
  34. 00000060: 00000000 00000000 00027000 00000000
  35. 00000070: 08a80001 00151020
  36. Model: SolidRun LX2160ACEX7 COM express type 7 based board
  37. Board: LX2160ACE Rev2.0-CEX7, SD
  38. SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 100MHz
  39. SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz
  40. SERDES3 Reference: Clock1 = 100MHz Clock2 = 100Hz
  41. DRAM: 31.9 GiB
  42. DDR 31.9 GiB (DDR4, 64-bit, CL=20, ECC off)
  43. DDR Controller Interleaving Mode: 256B
  44. DDR Chip-Select Interleaving Mode: CS0+CS1
  45. dev_get_priv: null device
  46. dev_get_priv: null device
  47. Using SERDES1 Protocol: 8 (0x8)
  48. Using SERDES2 Protocol: 5 (0x5)
  49. Using SERDES3 Protocol: 2 (0x2)
  50. PCIe1: pcie@3400000 disabled
  51. PCIe2: pcie@3500000 disabled
  52. PCIe3: pcie@3600000 Root Complex: x2 gen2
  53. PCIe4: pcie@3700000 disabled
  54. PCIe5: pcie@3800000 Root Complex: no link
  55. PCIe6: pcie@3900000 disabled
  56. WDT: Started with servicing (30s timeout)
  57. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  58. Loading Environment from MMC... OK
  59. EEPROM: TlvInfo v1 len=88
  60. In: serial_pl01x
  61. Out: serial_pl01x
  62. Err: serial_pl01x
  63. SEC0: RNG instantiated
  64. fsl_board_late_init
  65. Net: eth0: DPMAC3@xgmii, eth1: DPMAC4@xgmii, eth2: DPMAC5@xgmii, eth3: DPMAC6@xgmii, eth4: DPMAC7@xgmii, eth5: DPMAC8@xgmii, eth6: DPMAC9@xgmii, eth7: DPMAC10@xgmii, eth8: DPMAC17@rgmii-id [PRIME]
  66.  
  67. MMC read: dev # 0, block # 20480, count 4608 ... 4608 blocks read: OK
  68.  
  69. MMC read: dev # 0, block # 28672, count 2048 ... 2048 blocks read: OK
  70. crc32+
  71. fsl-mc: Booting Management Complex ... SUCCESS
  72. fsl-mc: Management Complex booted (version: 10.28.1, boot status: 0x1)
  73. Hit any key to stop autoboot: 0
  74. Device: FSL_SDHC
  75. Manufacturer ID: 3
  76. OEM: 5344
  77. Name: SC16G
  78. Bus Speed: 50000000
  79. Mode: SD High Speed (50MHz)
  80. Rd Block Len: 512
  81. SD version 3.0
  82. High Capacity: Yes
  83. Capacity: 14.8 GiB
  84. Bus Width: 4-bit
  85. Erase Group Size: 512 Bytes
  86.  
  87. MMC read: dev # 0, block # 26624, count 2048 ... 2048 blocks read: OK
  88. switch to partitions #0, OK
  89. mmc0 is current device
  90. Scanning mmc 0:1...
  91. Scanning disk [email protected]...
  92. Scanning disk [email protected]...
  93. ** Unrecognized filesystem type **
  94. Found 6 disks
  95. No EFI system partition
  96. ERROR: No descriptor returned from SECReleasing fan controller full speed gpio
  97. BootOrder not defined
  98. EFI boot manager: Cannot load any image
  99. Scanning mmc 0:2...
  100. Found /extlinux/extlinux.conf
  101. Retrieving file: /extlinux/extlinux.conf
  102. 331 bytes read in 10 ms (32.2 KiB/s)
  103. 1: primary kernel
  104. Retrieving file: /boot/Image
  105. Failed to load '/boot/Image'
  106. Skipping primary for failure retrieving kernel
  107. SCRIPT FAILED: continuing...
  108. Re-Distributor 0 LPI is already enabled
  109. Releasing fan controller full speed gpio
  110. BootOrder not defined
  111. EFI boot manager: Cannot load any image
  112. Scanning mmc 0:3...
  113. Found /extlinux/extlinux.conf
  114. Retrieving file: /extlinux/extlinux.conf
  115. 346 bytes read in 12 ms (27.3 KiB/s)
  116. 1: primary kernel
  117. Retrieving file: /boot/Image
  118. 27099648 bytes read in 1138 ms (22.7 MiB/s)
  119. append: console=ttyAMA0,115200 earlycon=pl011,mmio32,0x21c0000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf isolcpus=13-15 root=PARTUUID=385932af-03 rw rootwait
  120. Retrieving file: /boot/fsl-lx2160a-clearfog-cx.dtb
  121. 45111 bytes read in 18 ms (2.4 MiB/s)
  122. Moving Image from 0x81100000 to 0x81200000, end=82ce0000
  123. ## Flattened Device Tree blob at 81000000
  124. Booting using the fdt blob at 0x81000000
  125. Loading Device Tree to 000000009fff1000, end 000000009ffff036 ... OK
  126. Re-Distributor 0 LPI is already enabled
  127. Releasing fan controller full speed gpio
  128. fsl-mc: Deploying data path layout ... WARNING: Firmware returned an error (GSR: 0x3f)
  129.  
  130. Starting kernel ...
  131.  
  132. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  133. [ 0.000000] Linux version 5.10.35-00026-gb60460ed5a4e (antonyk@bwt-0615) (aarch64-linux-gnu-gcc (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4], GNU ld (Linaro_Binutils-2019.02) 2.28.2.20170706) #6 SMP Fri Nov 4 13:26:36 GMT 2022
  134. [ 0.000000] Machine model: SolidRun LX2160A Clearfog CX
  135. [ 0.000000] earlycon: pl11 at MMIO32 0x00000000021c0000 (options '')
  136. [ 0.000000] printk: bootconsole [pl11] enabled
  137. [ 0.000000] efi: UEFI not found.
  138. [ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000
  139. [ 0.000000] NUMA: No NUMA configuration found
  140. [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000277fffffff]
  141. [ 0.000000] NUMA: NODE_DATA [mem 0x277c3d2b00-0x277c3d4fff]
  142. [ 0.000000] Zone ranges:
  143. [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
  144. [ 0.000000] DMA32 empty
  145. [ 0.000000] Normal [mem 0x0000000100000000-0x000000277fffffff]
  146. [ 0.000000] Movable zone start for each node
  147. [ 0.000000] Early memory node ranges
  148. [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fbdfffff]
  149. [ 0.000000] node 0: [mem 0x0000002080000000-0x000000277fffffff]
  150. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000277fffffff]
  151. [ 0.000000] psci: probing for conduit method from DT.
  152. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  153. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  154. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  155. [ 0.000000] psci: SMC Calling Convention v1.2
  156. [ 0.000000] percpu: Embedded 24 pages/cpu s58776 r8192 d31336 u98304
  157. [ 0.000000] Detected PIPT I-cache on CPU0
  158. [ 0.000000] CPU features: detected: GIC system register CPU interface
  159. [ 0.000000] CPU features: detected: EL2 vector hardening
  160. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  161. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  162. [ 0.000000] CPU features: detected: Spectre-v2
  163. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  164. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7724544
  165. [ 0.000000] Policy zone: Normal
  166. [ 0.000000] Kernel command line: console=ttyAMA0,115200 earlycon=pl011,mmio32,0x21c0000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf isolcpus=13-15 root=PARTUUID=385932af-03 rw rootwait
  167. [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
  168. [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
  169. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  170. [ 0.000000] software IO TLB: mapped [mem 0x00000000f5c00000-0x00000000f9c00000] (64MB)
  171. [ 0.000000] Memory: 28560392K/31389696K available (16832K kernel code, 1312K rwdata, 5676K rodata, 2560K init, 972K bss, 2796536K reserved, 32768K cma-reserved)
  172. [ 0.000000] random: get_random_u32 called from cache_grow_begin+0x168/0x508 with crng_init=0
  173. [ 0.000000] rcu: Hierarchical RCU implementation.
  174. [ 0.000000] rcu: RCU event tracing is enabled.
  175. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  176. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  177. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  178. [ 0.000000] GICv3: 256 SPIs implemented
  179. [ 0.000000] GICv3: 0 Extended SPIs implemented
  180. [ 0.000000] GICv3: Distributor has no Range Selector support
  181. [ 0.000000] GICv3: 16 PPIs implemented
  182. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000
  183. [ 0.000000] ITS [mem 0x06020000-0x0603ffff]
  184. [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080080000 (flat, esz 8, psz 64K, shr 0)
  185. [ 0.000000] ITS: using cache flushing for cmd queue
  186. [ 0.000000] GICv3: Using preallocated redistributor tables
  187. [ 0.000000] GICv3: using LPI property table @0x0000000080000000
  188. [ 0.000000] GICv3: CPU0: using reserved LPI pending table @0x0000000080010000
  189. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
  190. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
  191. [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
  192. [ 0.008386] Console: colour dummy device 80x25
  193. [ 0.012923] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
  194. [ 0.023391] pid_max: default: 32768 minimum: 301
  195. [ 0.028145] LSM: Security Framework initializing
  196. [ 0.032817] LoadPin: ready to pin (currently enforcing)
  197. [ 0.038241] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  198. [ 0.045981] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  199. [ 0.054813] rcu: Hierarchical SRCU implementation.
  200. [ 0.059749] Platform MSI: gic-its@6020000 domain created
  201. [ 0.065177] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
  202. [ 0.072784] fsl-mc MSI: gic-its@6020000 domain created
  203. [ 0.078240] EFI services will not be available.
  204. [ 0.083116] smp: Bringing up secondary CPUs ...
  205. [ 0.087988] Detected PIPT I-cache on CPU1
  206. [ 0.088007] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000
  207. [ 0.088030] GICv3: CPU1: using reserved LPI pending table @0x0000000080020000
  208. [ 0.088064] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  209. [ 0.088397] Detected PIPT I-cache on CPU2
  210. [ 0.088417] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000
  211. [ 0.088440] GICv3: CPU2: using reserved LPI pending table @0x0000000080030000
  212. [ 0.088478] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
  213. [ 0.088816] Detected PIPT I-cache on CPU3
  214. [ 0.088832] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000
  215. [ 0.088851] GICv3: CPU3: using reserved LPI pending table @0x0000000080040000
  216. [ 0.088880] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
  217. [ 0.089209] Detected PIPT I-cache on CPU4
  218. [ 0.089229] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000
  219. [ 0.089249] GICv3: CPU4: using reserved LPI pending table @0x0000000080050000
  220. [ 0.089284] CPU4: Booted secondary processor 0x0000000200 [0x410fd083]
  221. [ 0.089607] Detected PIPT I-cache on CPU5
  222. [ 0.089626] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000
  223. [ 0.089645] GICv3: CPU5: using reserved LPI pending table @0x0000000080060000
  224. [ 0.089669] CPU5: Booted secondary processor 0x0000000201 [0x410fd083]
  225. [ 0.089975] Detected PIPT I-cache on CPU6
  226. [ 0.089999] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000
  227. [ 0.090020] GICv3: CPU6: using reserved LPI pending table @0x0000000080070000
  228. [ 0.090051] CPU6: Booted secondary processor 0x0000000300 [0x410fd083]
  229. [ 0.090357] Detected PIPT I-cache on CPU7
  230. [ 0.090379] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000
  231. [ 0.090398] GICv3: CPU7: using reserved LPI pending table @0x0000000080080000
  232. [ 0.090420] CPU7: Booted secondary processor 0x0000000301 [0x410fd083]
  233. [ 0.090728] Detected PIPT I-cache on CPU8
  234. [ 0.090756] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000
  235. [ 0.090774] GICv3: CPU8: using reserved LPI pending table @0x0000000080090000
  236. [ 0.090805] CPU8: Booted secondary processor 0x0000000400 [0x410fd083]
  237. [ 0.091100] Detected PIPT I-cache on CPU9
  238. [ 0.091126] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000
  239. [ 0.091137] GICv3: CPU9: using reserved LPI pending table @0x00000000800a0000
  240. [ 0.091156] CPU9: Booted secondary processor 0x0000000401 [0x410fd083]
  241. [ 0.091458] Detected PIPT I-cache on CPU10
  242. [ 0.091488] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000
  243. [ 0.091501] GICv3: CPU10: using reserved LPI pending table @0x00000000800b0000
  244. [ 0.091532] CPU10: Booted secondary processor 0x0000000500 [0x410fd083]
  245. [ 0.091847] Detected PIPT I-cache on CPU11
  246. [ 0.091865] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000
  247. [ 0.091876] GICv3: CPU11: using reserved LPI pending table @0x00000000800c0000
  248. [ 0.091895] CPU11: Booted secondary processor 0x0000000501 [0x410fd083]
  249. [ 0.092185] Detected PIPT I-cache on CPU12
  250. [ 0.092207] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000
  251. [ 0.092220] GICv3: CPU12: using reserved LPI pending table @0x00000000800d0000
  252. [ 0.092250] CPU12: Booted secondary processor 0x0000000600 [0x410fd083]
  253. [ 0.092546] Detected PIPT I-cache on CPU13
  254. [ 0.092565] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000
  255. [ 0.092576] GICv3: CPU13: using reserved LPI pending table @0x00000000800e0000
  256. [ 0.092595] CPU13: Booted secondary processor 0x0000000601 [0x410fd083]
  257. [ 0.092877] Detected PIPT I-cache on CPU14
  258. [ 0.092900] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000
  259. [ 0.092913] GICv3: CPU14: using reserved LPI pending table @0x00000000800f0000
  260. [ 0.092939] CPU14: Booted secondary processor 0x0000000700 [0x410fd083]
  261. [ 0.093222] Detected PIPT I-cache on CPU15
  262. [ 0.093242] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000
  263. [ 0.093252] GICv3: CPU15: using reserved LPI pending table @0x0000000080100000
  264. [ 0.093272] CPU15: Booted secondary processor 0x0000000701 [0x410fd083]
  265. [ 0.093310] smp: Brought up 1 node, 16 CPUs
  266. [ 0.474030] SMP: Total of 16 processors activated.
  267. [ 0.478870] CPU features: detected: 32-bit EL0 Support
  268. [ 0.484061] CPU features: detected: CRC32 instructions
  269. [ 0.489251] CPU features: detected: 32-bit EL1 Support
  270. [ 0.516692] CPU: All CPU(s) started at EL2
  271. [ 0.520862] alternatives: patching kernel code
  272. [ 0.526097] devtmpfs: initialized
  273. [ 0.532544] KASLR enabled
  274. [ 0.535273] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  275. [ 0.545131] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
  276. [ 0.552589] pinctrl core: initialized pinctrl subsystem
  277. [ 0.558100] DMI not present or invalid.
  278. [ 0.562206] NET: Registered protocol family 16
  279. [ 0.567654] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
  280. [ 0.575457] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  281. [ 0.583957] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  282. [ 0.592066] audit: initializing netlink subsys (disabled)
  283. [ 0.597596] audit: type=2000 audit(0.392:1): state=initialized audit_enabled=0 res=1
  284. [ 0.597817] thermal_sys: Registered thermal governor 'step_wise'
  285. [ 0.605429] thermal_sys: Registered thermal governor 'power_allocator'
  286. [ 0.611916] cpuidle: using governor menu
  287. [ 0.622664] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  288. [ 0.629676] ASID allocator initialised with 32768 entries
  289. [ 0.635426] Serial: AMBA PL011 UART driver
  290. [ 0.645722] Machine: SolidRun LX2160A Clearfog CX
  291. [ 0.650477] SoC family: QorIQ LX2160A
  292. [ 0.654170] SoC ID: svr:0x87360020, Revision: 2.0
  293. [ 0.659040] 21c0000.serial: ttyAMA0 at MMIO 0x21c0000 (irq = 25, base_baud = 0) is a SBSA
  294. [ 0.667313] printk: console [ttyAMA0] enabled
  295. [ 0.667313] printk: console [ttyAMA0] enabled
  296. [ 0.676054] printk: bootconsole [pl11] disabled
  297. [ 0.676054] printk: bootconsole [pl11] disabled
  298. [ 0.685317] 21d0000.serial: ttyAMA1 at MMIO 0x21d0000 (irq = 26, base_baud = 0) is a SBSA
  299. [ 0.694819] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.28.1
  300. [ 0.703797] fsl_mc_dprc dprc.1: DMA mask not set
  301. [ 0.718671] HugeTLB registered 1.00 GiB page size, pre-allocated 2 pages
  302. [ 0.725375] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  303. [ 0.732065] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  304. [ 0.738755] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  305. [ 0.746366] cryptd: max_cpu_qlen set to 1000
  306. [ 0.818672] raid6: neonx8 gen() 6084 MB/s
  307. [ 0.890967] raid6: neonx8 xor() 4036 MB/s
  308. [ 0.963259] raid6: neonx4 gen() 5988 MB/s
  309. [ 1.035551] raid6: neonx4 xor() 4055 MB/s
  310. [ 1.107849] raid6: neonx2 gen() 5208 MB/s
  311. [ 1.180146] raid6: neonx2 xor() 3944 MB/s
  312. [ 1.252447] raid6: neonx1 gen() 3992 MB/s
  313. [ 1.324741] raid6: neonx1 xor() 3133 MB/s
  314. [ 1.397043] raid6: int64x8 gen() 3004 MB/s
  315. [ 1.469340] raid6: int64x8 xor() 1763 MB/s
  316. [ 1.541641] raid6: int64x4 gen() 3539 MB/s
  317. [ 1.613939] raid6: int64x4 xor() 1908 MB/s
  318. [ 1.686242] raid6: int64x2 gen() 3146 MB/s
  319. [ 1.758543] raid6: int64x2 xor() 1670 MB/s
  320. [ 1.830849] raid6: int64x1 gen() 2423 MB/s
  321. [ 1.903152] raid6: int64x1 xor() 1258 MB/s
  322. [ 1.907412] raid6: using algorithm neonx8 gen() 6084 MB/s
  323. [ 1.912800] raid6: .... xor() 4036 MB/s, rmw enabled
  324. [ 1.917754] raid6: using neon recovery algorithm
  325. [ 1.922397] ACPI: Interpreter disabled.
  326. [ 1.926619] iommu: Default domain type: Passthrough
  327. [ 1.931723] SCSI subsystem initialized
  328. [ 1.935604] usbcore: registered new interface driver usbfs
  329. [ 1.941095] usbcore: registered new interface driver hub
  330. [ 1.946412] usbcore: registered new device driver usb
  331. [ 1.951674] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
  332. [ 1.959071] i2c i2c-0: IMX I2C adapter registered
  333. [ 1.963883] imx-i2c 2020000.i2c: can't get pinctrl, bus recovery not supported
  334. [ 1.971131] i2c i2c-1: IMX I2C adapter registered
  335. [ 1.975897] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported
  336. [ 1.983184] i2c i2c-2: IMX I2C adapter registered
  337. [ 1.987984] pps_core: LinuxPPS API ver. 1 registered
  338. [ 1.992939] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  339. [ 2.002064] PTP clock support registered
  340. [ 2.006024] EDAC MC: Ver: 3.0.0
  341. [ 2.009499] No BMan portals available!
  342. [ 2.013389] QMan: Allocated lookup table at (____ptrval____), entry count 65537
  343. [ 2.020810] No QMan portals available!
  344. [ 2.024721] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree
  345. [ 2.031124] NetLabel: Initializing
  346. [ 2.034514] NetLabel: domain hash size = 128
  347. [ 2.038865] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  348. [ 2.044536] NetLabel: unlabeled traffic allowed by default
  349. [ 2.050290] clocksource: Switched to clocksource arch_sys_counter
  350. [ 2.056480] VFS: Disk quotas dquot_6.6.0
  351. [ 2.060428] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  352. [ 2.067377] pnp: PnP ACPI: disabled
  353. [ 2.073739] NET: Registered protocol family 2
  354. [ 2.078375] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
  355. [ 2.087225] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  356. [ 2.096101] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
  357. [ 2.103893] TCP: Hash tables configured (established 262144 bind 65536)
  358. [ 2.110790] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
  359. [ 2.118488] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
  360. [ 2.125658] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
  361. [ 2.133365] NET: Registered protocol family 1
  362. [ 2.137913] RPC: Registered named UNIX socket transport module.
  363. [ 2.143834] RPC: Registered udp transport module.
  364. [ 2.148532] RPC: Registered tcp transport module.
  365. [ 2.153227] RPC: Registered tcp NFSv4.1 backchannel transport module.
  366. [ 2.159661] PCI: CLS 0 bytes, default 64
  367. [ 2.164462] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  368. [ 2.172807] kvm [1]: IPA Size Limit: 44 bits
  369. [ 2.177484] kvm [1]: vgic-v2@c0e0000
  370. [ 2.181067] kvm [1]: GIC system register CPU interface enabled
  371. [ 2.187080] kvm [1]: vgic interrupt IRQ9
  372. [ 2.191190] kvm [1]: Hyp mode initialized successfully
  373. [ 2.198245] Initialise system trusted keyrings
  374. [ 2.202753] workingset: timestamp_bits=42 max_order=23 bucket_order=0
  375. [ 2.209643] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  376. [ 2.215649] NFS: Registering the id_resolver key type
  377. [ 2.220704] Key type id_resolver registered
  378. [ 2.224879] Key type id_legacy registered
  379. [ 2.228892] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  380. [ 2.235586] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  381. [ 2.242980] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  382. [ 2.249186] fuse: init (API version 7.32)
  383. [ 2.253254] 9p: Installing v9fs 9p2000 file system support
  384. [ 2.278189] NET: Registered protocol family 38
  385. [ 2.282630] xor: measuring software checksum speed
  386. [ 2.288513] 8regs : 8951 MB/sec
  387. [ 2.293951] 32regs : 9011 MB/sec
  388. [ 2.299409] arm64_neon : 8861 MB/sec
  389. [ 2.303755] xor: using function: 32regs (9011 MB/sec)
  390. [ 2.308798] Key type asymmetric registered
  391. [ 2.312884] Asymmetric key parser 'x509' registered
  392. [ 2.317764] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  393. [ 2.325200] io scheduler mq-deadline registered
  394. [ 2.329724] io scheduler kyber registered
  395. [ 2.334443] serdes-28g 1ea0000.serdes_phy: PLLF: disabled, unlocked
  396. [ 2.340704] serdes-28g 1ea0000.serdes_phy: Reference clock: 100MHz
  397. [ 2.346960] serdes-28g 1ea0000.serdes_phy: clock net: 5GHz
  398. [ 2.352522] serdes-28g 1ea0000.serdes_phy: Supported interfaces:
  399. [ 2.358606] serdes-28g 1ea0000.serdes_phy: sgmii
  400. [ 2.363387] serdes-28g 1ea0000.serdes_phy: qsgmii
  401. [ 2.368255] serdes-28g 1ea0000.serdes_phy: 1000base-x
  402. [ 2.373472] serdes-28g 1ea0000.serdes_phy: PLLS: enabled, locked
  403. [ 2.379468] serdes-28g 1ea0000.serdes_phy: Reference clock: 161.1328125MHz
  404. [ 2.386419] serdes-28g 1ea0000.serdes_phy: clock net: 10.3125GHz
  405. [ 2.392503] serdes-28g 1ea0000.serdes_phy: Supported interfaces:
  406. [ 2.398586] serdes-28g 1ea0000.serdes_phy: 10gbase-r
  407. [ 2.403713] serdes-28g 1ea0000.serdes_phy: usxgmii
  408. [ 2.408706] serdes-28g 1ea0000.serdes_phy: created PHY for lane #0
  409. [ 2.414905] serdes-28g 1ea0000.serdes_phy: created PHY for lane #1
  410. [ 2.421103] serdes-28g 1ea0000.serdes_phy: created PHY for lane #2
  411. [ 2.427301] serdes-28g 1ea0000.serdes_phy: created PHY for lane #3
  412. [ 2.433496] serdes-28g 1ea0000.serdes_phy: created PHY for lane #4
  413. [ 2.439701] serdes-28g 1ea0000.serdes_phy: created PHY for lane #5
  414. [ 2.445896] serdes-28g 1ea0000.serdes_phy: created PHY for lane #6
  415. [ 2.452092] serdes-28g 1ea0000.serdes_phy: created PHY for lane #7
  416. [ 2.458311] serdes-28g 1eb0000.serdes_phy: PLLF: enabled, locked
  417. [ 2.464309] serdes-28g 1eb0000.serdes_phy: Reference clock: 100MHz
  418. [ 2.470566] serdes-28g 1eb0000.serdes_phy: clock net: 5GHz
  419. [ 2.476127] serdes-28g 1eb0000.serdes_phy: Supported interfaces:
  420. [ 2.482210] serdes-28g 1eb0000.serdes_phy: sgmii
  421. [ 2.486992] serdes-28g 1eb0000.serdes_phy: qsgmii
  422. [ 2.491859] serdes-28g 1eb0000.serdes_phy: 1000base-x
  423. [ 2.497076] serdes-28g 1eb0000.serdes_phy: PLLS: enabled, locked
  424. [ 2.503072] serdes-28g 1eb0000.serdes_phy: Reference clock: 100MHz
  425. [ 2.509327] serdes-28g 1eb0000.serdes_phy: Supported interfaces:
  426. [ 2.515440] serdes-28g 1eb0000.serdes_phy: created PHY for lane #0
  427. [ 2.521637] serdes-28g 1eb0000.serdes_phy: created PHY for lane #1
  428. [ 2.527835] serdes-28g 1eb0000.serdes_phy: created PHY for lane #2
  429. [ 2.534032] serdes-28g 1eb0000.serdes_phy: created PHY for lane #3
  430. [ 2.540228] serdes-28g 1eb0000.serdes_phy: created PHY for lane #4
  431. [ 2.546425] serdes-28g 1eb0000.serdes_phy: created PHY for lane #5
  432. [ 2.552622] serdes-28g 1eb0000.serdes_phy: created PHY for lane #6
  433. [ 2.558818] serdes-28g 1eb0000.serdes_phy: created PHY for lane #7
  434. [ 2.565573] layerscape-pcie 3600000.pcie: host bridge /soc/pcie@3600000 ranges:
  435. [ 2.572886] layerscape-pcie 3600000.pcie: MEM 0x9040000000..0x907fffffff -> 0x0040000000
  436. [ 2.581482] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0000:00
  437. [ 2.588178] pci_bus 0000:00: root bus resource [bus 00-ff]
  438. [ 2.593657] pci_bus 0000:00: root bus resource [mem 0x9040000000-0x907fffffff] (bus address [0x40000000-0x7fffffff])
  439. [ 2.604186] pci 0000:00:00.0: [1957:8d80] type 01 class 0x060400
  440. [ 2.610241] pci 0000:00:00.0: supports D1 D2
  441. [ 2.614503] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
  442. [ 2.621685] pci 0000:01:00.0: [111d:80e8] type 00 class 0x020000
  443. [ 2.627849] pci 0000:01:00.0: reg 0x10: [mem 0x9040000000-0x9040ffffff 64bit]
  444. [ 2.635080] pci 0000:01:00.0: reg 0x18: [mem 0x9041000000-0x904100ffff 64bit pref]
  445. [ 2.642745] pci 0000:01:00.0: reg 0x20: [mem 0x9041010000-0x9041010fff 64bit pref]
  446. [ 2.650956] pci 0000:01:00.0: supports D1
  447. [ 2.654958] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
  448. [ 2.661944] pci 0000:01:00.1: [111d:80e8] type 00 class 0x020000
  449. [ 2.668105] pci 0000:01:00.1: reg 0x10: [mem 0x9042000000-0x9042ffffff 64bit]
  450. [ 2.675336] pci 0000:01:00.1: reg 0x18: [mem 0x9043000000-0x904300ffff 64bit pref]
  451. [ 2.683001] pci 0000:01:00.1: reg 0x20: [mem 0x9043010000-0x9043010fff 64bit pref]
  452. [ 2.691146] pci 0000:01:00.1: supports D1
  453. [ 2.695148] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
  454. [ 2.711233] pci 0000:00:00.0: BAR 14: assigned [mem 0x9040000000-0x9041ffffff]
  455. [ 2.718450] pci 0000:00:00.0: BAR 15: assigned [mem 0x9042000000-0x90420fffff 64bit pref]
  456. [ 2.726621] pci 0000:01:00.0: BAR 0: assigned [mem 0x9040000000-0x9040ffffff 64bit]
  457. [ 2.734340] pci 0000:01:00.1: BAR 0: assigned [mem 0x9041000000-0x9041ffffff 64bit]
  458. [ 2.742054] pci 0000:01:00.0: BAR 2: assigned [mem 0x9042000000-0x904200ffff 64bit pref]
  459. [ 2.750203] pci 0000:01:00.1: BAR 2: assigned [mem 0x9042010000-0x904201ffff 64bit pref]
  460. [ 2.758352] pci 0000:01:00.0: BAR 4: assigned [mem 0x9042020000-0x9042020fff 64bit pref]
  461. [ 2.766501] pci 0000:01:00.1: BAR 4: assigned [mem 0x9042021000-0x9042021fff 64bit pref]
  462. [ 2.774650] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  463. [ 2.779868] pci 0000:00:00.0: bridge window [mem 0x9040000000-0x9041ffffff]
  464. [ 2.786994] pci 0000:00:00.0: bridge window [mem 0x9042000000-0x90420fffff 64bit pref]
  465. [ 2.795084] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
  466. [ 2.803608] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
  467. [ 2.812132] pci 0000:01:00.1: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
  468. [ 2.820686] layerscape-pcie 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
  469. [ 2.827998] layerscape-pcie 3800000.pcie: MEM 0xa040000000..0xa07fffffff -> 0x0040000000
  470. [ 2.836594] layerscape-pcie 3800000.pcie: PCI host bridge to bus 0001:00
  471. [ 2.843289] pci_bus 0001:00: root bus resource [bus 00-ff]
  472. [ 2.848767] pci_bus 0001:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address [0x40000000-0x7fffffff])
  473. [ 2.859294] pci 0001:00:00.0: [1957:8d80] type 01 class 0x060400
  474. [ 2.865363] pci 0001:00:00.0: supports D1 D2
  475. [ 2.869625] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
  476. [ 2.877401] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
  477. [ 2.882634] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
  478. [ 2.891285] EINJ: ACPI disabled.
  479. [ 2.896596] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  480. [ 2.903961] arm-smmu 5000000.iommu: probing hardware configuration...
  481. [ 2.910400] arm-smmu 5000000.iommu: SMMUv2 with:
  482. [ 2.915011] arm-smmu 5000000.iommu: stage 1 translation
  483. [ 2.920313] arm-smmu 5000000.iommu: stage 2 translation
  484. [ 2.925616] arm-smmu 5000000.iommu: nested translation
  485. [ 2.930833] arm-smmu 5000000.iommu: coherent table walk
  486. [ 2.936134] arm-smmu 5000000.iommu: (IDR0.CTTW overridden by FW configuration)
  487. [ 2.943434] arm-smmu 5000000.iommu: stream matching with 128 register groups
  488. [ 2.950560] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
  489. [ 2.957081] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
  490. [ 2.963513] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
  491. [ 2.969943] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
  492. [ 2.980873] brd: module loaded
  493. [ 2.988258] loop: module loaded
  494. [ 2.991532] pci-endpoint-test 0000:00:00.0: Adding to iommu group 0
  495. [ 2.997894] pci-endpoint-test 0001:00:00.0: Adding to iommu group 1
  496. [ 3.004422] megasas: 07.714.04.00-rc1
  497. [ 3.008686] ahci-qoriq 3200000.sata: supply ahci not found, using dummy regulator
  498. [ 3.016231] ahci-qoriq 3200000.sata: supply phy not found, using dummy regulator
  499. [ 3.023641] ahci-qoriq 3200000.sata: supply target not found, using dummy regulator
  500. [ 3.031351] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  501. [ 3.040305] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  502. [ 3.050569] scsi host0: ahci-qoriq
  503. [ 3.054059] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 33
  504. [ 3.062035] ahci-qoriq 3210000.sata: supply ahci not found, using dummy regulator
  505. [ 3.069557] ahci-qoriq 3210000.sata: supply phy not found, using dummy regulator
  506. [ 3.076965] ahci-qoriq 3210000.sata: supply target not found, using dummy regulator
  507. [ 3.084659] ahci-qoriq 3210000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  508. [ 3.093611] ahci-qoriq 3210000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  509. [ 3.103511] scsi host1: ahci-qoriq
  510. [ 3.106980] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port 0x100 irq 34
  511. [ 3.114941] ahci-qoriq 3220000.sata: supply ahci not found, using dummy regulator
  512. [ 3.122460] ahci-qoriq 3220000.sata: supply phy not found, using dummy regulator
  513. [ 3.129872] ahci-qoriq 3220000.sata: supply target not found, using dummy regulator
  514. [ 3.137567] ahci-qoriq 3220000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  515. [ 3.146518] ahci-qoriq 3220000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  516. [ 3.156422] scsi host2: ahci-qoriq
  517. [ 3.159897] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port 0x100 irq 35
  518. [ 3.167861] ahci-qoriq 3230000.sata: supply ahci not found, using dummy regulator
  519. [ 3.175379] ahci-qoriq 3230000.sata: supply phy not found, using dummy regulator
  520. [ 3.182784] ahci-qoriq 3230000.sata: supply target not found, using dummy regulator
  521. [ 3.190480] ahci-qoriq 3230000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  522. [ 3.199433] ahci-qoriq 3230000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
  523. [ 3.209327] scsi host3: ahci-qoriq
  524. [ 3.212795] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port 0x100 irq 36
  525. [ 3.221450] spi-nor spi0.0: found mt35xu512aba, expected m25p80
  526. [ 3.227397] spi-nor spi0.0: mt35xu512aba (65536 Kbytes)
  527. [ 3.233415] spi-nor spi0.1: w25q32 (4096 Kbytes)
  528. [ 3.239257] libphy: Fixed MDIO Bus: probed
  529. [ 3.243936] tun: Universal TUN/TAP device driver, 1.6
  530. [ 3.249222] libphy: Freescale XGMAC MDIO Bus: probed
  531. [ 3.254835] libphy: Freescale XGMAC MDIO Bus: probed
  532. [ 3.259954] libphy: Freescale XGMAC MDIO Bus: probed
  533. [ 3.265234] libphy: Freescale XGMAC MDIO Bus: probed
  534. [ 3.270535] libphy: Freescale XGMAC MDIO Bus: probed
  535. [ 3.275811] libphy: Freescale XGMAC MDIO Bus: probed
  536. [ 3.281004] Freescale FM module, FMD API version 21.1.0
  537. [ 3.286286] Freescale FM Ports module
  538. [ 3.289936] fsl_mac: fsl_mac: FSL FMan MAC API based driver
  539. [ 3.295543] fsl_dpa: FSL DPAA Ethernet driver
  540. [ 3.299925] fsl_advanced: FSL DPAA Advanced drivers:
  541. [ 3.304879] fsl_proxy: FSL DPAA Proxy initialization driver
  542. [ 3.310472] fsl_oh: FSL FMan Offline Parsing port driver
  543. [ 3.315948] usbcore: registered new interface driver r8152
  544. [ 3.321437] usbcore: registered new interface driver asix
  545. [ 3.326838] usbcore: registered new interface driver ax88179_178a
  546. [ 3.332931] usbcore: registered new interface driver cdc_ether
  547. [ 3.338766] usbcore: registered new interface driver net1080
  548. [ 3.344426] usbcore: registered new interface driver cdc_subset
  549. [ 3.350347] usbcore: registered new interface driver zaurus
  550. [ 3.355925] usbcore: registered new interface driver cdc_ncm
  551. [ 3.361771] VFIO - User Level meta-driver version: 0.3
  552. [ 3.367783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  553. [ 3.374313] ehci-pci: EHCI PCI platform driver
  554. [ 3.376397] ata1: SATA link down (SStatus 0 SControl 300)
  555. [ 3.378761] ehci-platform: EHCI generic platform driver
  556. [ 3.389397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  557. [ 3.395574] ohci-pci: OHCI PCI platform driver
  558. [ 3.400021] ohci-platform: OHCI generic platform driver
  559. [ 3.405425] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  560. [ 3.410910] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  561. [ 3.418617] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010810
  562. [ 3.428019] xhci-hcd xhci-hcd.0.auto: irq 31, io mem 0x03100000
  563. [ 3.428479] ata2: SATA link down (SStatus 0 SControl 300)
  564. [ 3.434059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  565. [ 3.447577] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  566. [ 3.454790] usb usb1: Product: xHCI Host Controller
  567. [ 3.459657] usb usb1: Manufacturer: Linux 5.10.35-00026-gb60460ed5a4e xhci-hcd
  568. [ 3.466869] usb usb1: SerialNumber: xhci-hcd.0.auto
  569. [ 3.471914] hub 1-0:1.0: USB hub found
  570. [ 3.475673] hub 1-0:1.0: 1 port detected
  571. [ 3.479711] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  572. [ 3.480486] ata3: SATA link down (SStatus 0 SControl 300)
  573. [ 3.485199] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  574. [ 3.498224] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  575. [ 3.504804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  576. [ 3.513059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  577. [ 3.520272] usb usb2: Product: xHCI Host Controller
  578. [ 3.525140] usb usb2: Manufacturer: Linux 5.10.35-00026-gb60460ed5a4e xhci-hcd
  579. [ 3.532354] usb usb2: SerialNumber: xhci-hcd.0.auto
  580. [ 3.532475] ata4: SATA link down (SStatus 0 SControl 300)
  581. [ 3.537375] hub 2-0:1.0: USB hub found
  582. [ 3.546365] hub 2-0:1.0: 1 port detected
  583. [ 3.550442] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  584. [ 3.555924] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
  585. [ 3.563628] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010810
  586. [ 3.573028] xhci-hcd xhci-hcd.1.auto: irq 32, io mem 0x03110000
  587. [ 3.579053] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  588. [ 3.587312] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  589. [ 3.594526] usb usb3: Product: xHCI Host Controller
  590. [ 3.599395] usb usb3: Manufacturer: Linux 5.10.35-00026-gb60460ed5a4e xhci-hcd
  591. [ 3.606610] usb usb3: SerialNumber: xhci-hcd.1.auto
  592. [ 3.611663] hub 3-0:1.0: USB hub found
  593. [ 3.615420] hub 3-0:1.0: 1 port detected
  594. [ 3.619452] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  595. [ 3.624936] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
  596. [ 3.632590] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  597. [ 3.639170] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  598. [ 3.647426] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  599. [ 3.654638] usb usb4: Product: xHCI Host Controller
  600. [ 3.659508] usb usb4: Manufacturer: Linux 5.10.35-00026-gb60460ed5a4e xhci-hcd
  601. [ 3.666720] usb usb4: SerialNumber: xhci-hcd.1.auto
  602. [ 3.671749] hub 4-0:1.0: USB hub found
  603. [ 3.675503] hub 4-0:1.0: 1 port detected
  604. [ 3.679581] usbcore: registered new interface driver cdc_acm
  605. [ 3.685232] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  606. [ 3.693298] usbcore: registered new interface driver uas
  607. [ 3.698636] usbcore: registered new interface driver usb-storage
  608. [ 3.704666] usbcore: registered new interface driver usbserial_generic
  609. [ 3.711192] usbserial: USB Serial support registered for generic
  610. [ 3.717202] usbcore: registered new interface driver ftdi_sio
  611. [ 3.722951] usbserial: USB Serial support registered for FTDI USB Serial Device
  612. [ 3.730297] usbcore: registered new interface driver usb_serial_simple
  613. [ 3.736822] usbserial: USB Serial support registered for carelink
  614. [ 3.742913] usbserial: USB Serial support registered for zio
  615. [ 3.748571] usbserial: USB Serial support registered for funsoft
  616. [ 3.754575] usbserial: USB Serial support registered for flashloader
  617. [ 3.760925] usbserial: USB Serial support registered for google
  618. [ 3.766842] usbserial: USB Serial support registered for libtransistor
  619. [ 3.773367] usbserial: USB Serial support registered for vivopay
  620. [ 3.779371] usbserial: USB Serial support registered for moto_modem
  621. [ 3.785637] usbserial: USB Serial support registered for motorola_tetra
  622. [ 3.792249] usbserial: USB Serial support registered for novatel_gps
  623. [ 3.798600] usbserial: USB Serial support registered for hp4x
  624. [ 3.804343] usbserial: USB Serial support registered for suunto
  625. [ 3.810260] usbserial: USB Serial support registered for siemens_mpi
  626. [ 3.817539] ftm-alarm 2800000.timer: registered as rtc1
  627. [ 3.822869] i2c /dev entries driver
  628. [ 3.827381] i2c i2c-0: Added multiplexed i2c bus 3
  629. [ 3.832314] i2c i2c-0: Added multiplexed i2c bus 4
  630. [ 3.837238] i2c i2c-0: Added multiplexed i2c bus 5
  631. [ 3.842193] i2c i2c-0: Added multiplexed i2c bus 6
  632. [ 3.847064] i2c i2c-0: Added multiplexed i2c bus 7
  633. [ 3.851934] i2c i2c-0: Added multiplexed i2c bus 8
  634. [ 3.856804] i2c i2c-0: Added multiplexed i2c bus 9
  635. [ 3.861673] i2c i2c-0: Added multiplexed i2c bus 10
  636. [ 3.866548] pca954x 0-0077: registered 8 multiplexed busses for I2C mux pca9547
  637. [ 3.878465] amc6821 4-0018: Revision 3
  638. [ 3.913867] random: fast init done
  639. [ 4.046287] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  640. [ 4.198476] usb 3-1: New USB device found, idVendor=04b4, idProduct=6502, bcdDevice=50.10
  641. [ 4.206645] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  642. [ 4.247142] hub 3-1:1.0: USB hub found
  643. [ 4.250918] hub 3-1:1.0: 4 ports detected
  644. [ 4.298525] sbsa-gwdt 23a0000.watchdog: Initialized with 30s timeout @ 25000050 Hz, action=0. [enabled]
  645. [ 4.309591] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver
  646. [ 4.318172] sdhci: Secure Digital Host Controller Interface driver
  647. [ 4.324345] sdhci: Copyright(c) Pierre Ossman
  648. [ 4.326309] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  649. [ 4.328727] sdhci-pltfm: SDHCI platform and OF driver helper
  650. [ 4.342224] ledtrig-cpu: registered to indicate activity on CPUs
  651. [ 4.348317] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  652. [ 4.354544] usb 4-1: New USB device found, idVendor=04b4, idProduct=6500, bcdDevice=50.10
  653. [ 4.354819] usbcore: registered new interface driver usbhid
  654. [ 4.362914] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  655. [ 4.367247] mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using ADMA 64-bit
  656. [ 4.367252] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit
  657. [ 4.368472] usbhid: USB HID core driver
  658. [ 4.368779] No fsl,qman node
  659. [ 4.397928] Freescale USDPAA process driver
  660. [ 4.402100] fsl-usdpaa: no region found
  661. [ 4.405925] Freescale USDPAA process IRQ driver
  662. [ 4.410822] optee: probing for conduit method.
  663. [ 4.415261] optee: api uid mismatch
  664. [ 4.418746] optee: probe of firmware:optee failed with error -22
  665. [ 4.424834] pktgen: Packet Generator for packet performance testing. Version: 2.75
  666. [ 4.433986] NET: Registered protocol family 26
  667. [ 4.438446] u32 classifier
  668. [ 4.439124] hub 4-1:1.0: USB hub found
  669. [ 4.441142] input device check on
  670. [ 4.441144] Actions configured
  671. [ 4.445052] hub 4-1:1.0: 4 ports detected
  672. [ 4.449005] Initializing XFRM netlink socket
  673. [ 4.460246] NET: Registered protocol family 10
  674. [ 4.462608] mmc1: new HS400 MMC card at address 0001
  675. [ 4.465841] Segment Routing with IPv6
  676. [ 4.469898] mmcblk1: mmc1:0001 DG4064 59.2 GiB
  677. [ 4.473289] RPL Segment Routing with IPv6
  678. [ 4.473334] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  679. [ 4.477961] mmcblk1boot0: mmc1:0001 DG4064 partition 1 4.00 MiB
  680. [ 4.482204] NET: Registered protocol family 17
  681. [ 4.487877] mmcblk1boot1: mmc1:0001 DG4064 partition 2 4.00 MiB
  682. [ 4.493641] NET: Registered protocol family 15
  683. [ 4.498136] mmcblk1rpmb: mmc1:0001 DG4064 partition 3 4.00 MiB, chardev (238:0)
  684. [ 4.504001] Bridge firewalling registered
  685. [ 4.519860] 8021q: 802.1Q VLAN Support v1.8
  686. [ 4.524044] lib80211: common routines for IEEE802.11 drivers
  687. [ 4.529727] 9pnet: Installing 9P2000 support
  688. [ 4.534004] tsn generic netlink module v1 init...
  689. [ 4.536142] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  690. [ 4.538734] Key type dns_resolver registered
  691. [ 4.545590] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
  692. [ 4.549753] registered taskstats version 1
  693. [ 4.558099] Loading compiled-in X.509 certificates
  694. [ 4.558285] mmcblk0: p1 p2 p3 p4
  695. [ 4.563564] Btrfs loaded, crc32c=crc32c-generic
  696. [ 4.572356] fsl_mc_dprc dprc.1: Adding to iommu group 2
  697. [ 4.602291] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
  698. [ 4.631467] fsl_mc_allocator dpbp.1: Adding to iommu group 2
  699. [ 4.637195] fsl_mc_allocator dpbp.0: Adding to iommu group 2
  700. [ 4.643920] fsl_mc_allocator dpmcp.35: Adding to iommu group 2
  701. [ 4.650328] fsl_mc_allocator dpmcp.34: Adding to iommu group 2
  702. [ 4.656725] fsl_mc_allocator dpmcp.33: Adding to iommu group 2
  703. [ 4.663122] fsl_mc_allocator dpmcp.32: Adding to iommu group 2
  704. [ 4.669518] fsl_mc_allocator dpmcp.31: Adding to iommu group 2
  705. [ 4.675910] fsl_mc_allocator dpmcp.30: Adding to iommu group 2
  706. [ 4.682314] fsl_mc_allocator dpmcp.29: Adding to iommu group 2
  707. [ 4.688708] fsl_mc_allocator dpmcp.28: Adding to iommu group 2
  708. [ 4.695103] fsl_mc_allocator dpmcp.27: Adding to iommu group 2
  709. [ 4.701497] fsl_mc_allocator dpmcp.26: Adding to iommu group 2
  710. [ 4.706414] usb 3-1.3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
  711. [ 4.707889] fsl_mc_allocator dpmcp.25: Adding to iommu group 2
  712. [ 4.715658] usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  713. [ 4.729366] fsl_mc_allocator dpmcp.24: Adding to iommu group 2
  714. [ 4.735761] fsl_mc_allocator dpmcp.23: Adding to iommu group 2
  715. [ 4.742156] fsl_mc_allocator dpmcp.22: Adding to iommu group 2
  716. [ 4.748551] fsl_mc_allocator dpmcp.21: Adding to iommu group 2
  717. [ 4.754945] fsl_mc_allocator dpmcp.20: Adding to iommu group 2
  718. [ 4.759084] hub 3-1.3:1.0: USB hub found
  719. [ 4.761342] fsl_mc_allocator dpmcp.19: Adding to iommu group 2
  720. [ 4.764713] hub 3-1.3:1.0: 4 ports detected
  721. [ 4.771073] fsl_mc_allocator dpmcp.18: Adding to iommu group 2
  722. [ 4.781070] fsl_mc_allocator dpmcp.17: Adding to iommu group 2
  723. [ 4.787467] fsl_mc_allocator dpmcp.16: Adding to iommu group 2
  724. [ 4.793862] fsl_mc_allocator dpmcp.15: Adding to iommu group 2
  725. [ 4.800260] fsl_mc_allocator dpmcp.14: Adding to iommu group 2
  726. [ 4.806662] fsl_mc_allocator dpmcp.13: Adding to iommu group 2
  727. [ 4.813059] fsl_mc_allocator dpmcp.12: Adding to iommu group 2
  728. [ 4.819453] fsl_mc_allocator dpmcp.11: Adding to iommu group 2
  729. [ 4.825852] fsl_mc_allocator dpmcp.10: Adding to iommu group 2
  730. [ 4.832250] fsl_mc_allocator dpmcp.9: Adding to iommu group 2
  731. [ 4.838567] fsl_mc_allocator dpmcp.8: Adding to iommu group 2
  732. [ 4.844875] fsl_mc_allocator dpmcp.7: Adding to iommu group 2
  733. [ 4.851187] fsl_mc_allocator dpmcp.6: Adding to iommu group 2
  734. [ 4.857501] fsl_mc_allocator dpmcp.5: Adding to iommu group 2
  735. [ 4.863815] fsl_mc_allocator dpmcp.4: Adding to iommu group 2
  736. [ 4.870125] fsl_mc_allocator dpmcp.3: Adding to iommu group 2
  737. [ 4.876437] fsl_mc_allocator dpmcp.2: Adding to iommu group 2
  738. [ 4.882753] fsl_mc_allocator dpmcp.1: Adding to iommu group 2
  739. [ 4.888564] fsl_mc_allocator dpcon.31: Adding to iommu group 2
  740. [ 4.894462] fsl_mc_allocator dpcon.30: Adding to iommu group 2
  741. [ 4.900359] fsl_mc_allocator dpcon.29: Adding to iommu group 2
  742. [ 4.906266] fsl_mc_allocator dpcon.28: Adding to iommu group 2
  743. [ 4.912166] fsl_mc_allocator dpcon.27: Adding to iommu group 2
  744. [ 4.918063] fsl_mc_allocator dpcon.26: Adding to iommu group 2
  745. [ 4.923958] fsl_mc_allocator dpcon.25: Adding to iommu group 2
  746. [ 4.929856] fsl_mc_allocator dpcon.24: Adding to iommu group 2
  747. [ 4.935756] fsl_mc_allocator dpcon.23: Adding to iommu group 2
  748. [ 4.941653] fsl_mc_allocator dpcon.22: Adding to iommu group 2
  749. [ 4.947551] fsl_mc_allocator dpcon.21: Adding to iommu group 2
  750. [ 4.953447] fsl_mc_allocator dpcon.20: Adding to iommu group 2
  751. [ 4.959347] fsl_mc_allocator dpcon.19: Adding to iommu group 2
  752. [ 4.965246] fsl_mc_allocator dpcon.18: Adding to iommu group 2
  753. [ 4.971144] fsl_mc_allocator dpcon.17: Adding to iommu group 2
  754. [ 4.977044] fsl_mc_allocator dpcon.16: Adding to iommu group 2
  755. [ 4.982947] fsl_mc_allocator dpcon.15: Adding to iommu group 2
  756. [ 4.988844] fsl_mc_allocator dpcon.14: Adding to iommu group 2
  757. [ 4.994743] fsl_mc_allocator dpcon.13: Adding to iommu group 2
  758. [ 5.000643] fsl_mc_allocator dpcon.12: Adding to iommu group 2
  759. [ 5.006545] fsl_mc_allocator dpcon.11: Adding to iommu group 2
  760. [ 5.012443] fsl_mc_allocator dpcon.10: Adding to iommu group 2
  761. [ 5.018350] fsl_mc_allocator dpcon.9: Adding to iommu group 2
  762. [ 5.024164] fsl_mc_allocator dpcon.8: Adding to iommu group 2
  763. [ 5.029979] fsl_mc_allocator dpcon.7: Adding to iommu group 2
  764. [ 5.035795] fsl_mc_allocator dpcon.6: Adding to iommu group 2
  765. [ 5.041609] fsl_mc_allocator dpcon.5: Adding to iommu group 2
  766. [ 5.047425] fsl_mc_allocator dpcon.4: Adding to iommu group 2
  767. [ 5.053238] fsl_mc_allocator dpcon.3: Adding to iommu group 2
  768. [ 5.059052] fsl_mc_allocator dpcon.2: Adding to iommu group 2
  769. [ 5.064867] fsl_mc_allocator dpcon.1: Adding to iommu group 2
  770. [ 5.070693] fsl_mc_allocator dpcon.0: Adding to iommu group 2
  771. [ 5.076508] fsl_dpaa2_eth dpni.0: Adding to iommu group 2
  772. [ 5.152243] fsl_dpaa2_mac dpmac.17: Adding to iommu group 2
  773. [ 5.158422] fsl_dpaa2_mac dpmac.10: Adding to iommu group 2
  774. [ 5.168834] fsl_dpaa2_mac dpmac.9: Adding to iommu group 2
  775. [ 5.178922] fsl_dpaa2_mac dpmac.8: Adding to iommu group 2
  776. [ 5.188988] fsl_dpaa2_mac dpmac.7: Adding to iommu group 2
  777. [ 5.198901] fsl_dpaa2_mac dpmac.6: Adding to iommu group 2
  778. [ 5.209070] fsl_dpaa2_mac dpmac.6: Error connecting to the MAC endpoint
  779. [ 5.216325] fsl_dpaa2_mac dpmac.5: Adding to iommu group 2
  780. [ 5.226316] fsl_dpaa2_mac dpmac.5: Error connecting to the MAC endpoint
  781. [ 5.233551] fsl_dpaa2_mac dpmac.4: Adding to iommu group 2
  782. [ 5.243319] fsl_dpaa2_mac dpmac.4: Error connecting to the MAC endpoint
  783. [ 5.250400] fsl_dpaa2_mac dpmac.3: Adding to iommu group 2
  784. [ 5.260559] fsl_dpaa2_mac dpmac.3: Error connecting to the MAC endpoint
  785. [ 5.267826] fsl_dpaa2_ptp dprtc.0: Adding to iommu group 2
  786. [ 5.275418] ptp_qoriq: device tree node missing required elements, try automatic configuration
  787. [ 5.284098] pps pps0: new PPS source ptp0
  788. [ 5.289761] fsl_mc_dpio dpio.15: Adding to iommu group 2
  789. [ 5.298693] fsl_mc_dpio dpio.15: probed
  790. [ 5.304613] fsl_mc_dpio dpio.14: Adding to iommu group 2
  791. [ 5.313533] fsl_mc_dpio dpio.14: probed
  792. [ 5.319458] fsl_mc_dpio dpio.13: Adding to iommu group 2
  793. [ 5.328366] fsl_mc_dpio dpio.13: probed
  794. [ 5.334300] fsl_mc_dpio dpio.12: Adding to iommu group 2
  795. [ 5.343210] fsl_mc_dpio dpio.12: probed
  796. [ 5.349131] fsl_mc_dpio dpio.11: Adding to iommu group 2
  797. [ 5.358037] fsl_mc_dpio dpio.11: probed
  798. [ 5.363960] fsl_mc_dpio dpio.10: Adding to iommu group 2
  799. [ 5.372869] fsl_mc_dpio dpio.10: probed
  800. [ 5.378795] fsl_mc_dpio dpio.9: Adding to iommu group 2
  801. [ 5.387614] fsl_mc_dpio dpio.9: probed
  802. [ 5.393450] fsl_mc_dpio dpio.8: Adding to iommu group 2
  803. [ 5.402269] fsl_mc_dpio dpio.8: probed
  804. [ 5.408105] fsl_mc_dpio dpio.7: Adding to iommu group 2
  805. [ 5.416927] fsl_mc_dpio dpio.7: probed
  806. [ 5.422766] fsl_mc_dpio dpio.6: Adding to iommu group 2
  807. [ 5.431586] fsl_mc_dpio dpio.6: probed
  808. [ 5.437417] fsl_mc_dpio dpio.5: Adding to iommu group 2
  809. [ 5.446236] fsl_mc_dpio dpio.5: probed
  810. [ 5.452072] fsl_mc_dpio dpio.4: Adding to iommu group 2
  811. [ 5.460894] fsl_mc_dpio dpio.4: probed
  812. [ 5.466747] fsl_mc_dpio dpio.3: Adding to iommu group 2
  813. [ 5.475566] fsl_mc_dpio dpio.3: probed
  814. [ 5.481399] fsl_mc_dpio dpio.2: Adding to iommu group 2
  815. [ 5.490222] fsl_mc_dpio dpio.2: probed
  816. [ 5.496056] fsl_mc_dpio dpio.1: Adding to iommu group 2
  817. [ 5.504879] fsl_mc_dpio dpio.1: probed
  818. [ 5.510721] fsl_mc_dpio dpio.0: Adding to iommu group 2
  819. [ 5.519541] fsl_mc_dpio dpio.0: probed
  820. [ 5.526894] fsl_mc_dprc dprc.1: DPRC device bound to driver
  821. [ 5.532625] pcieport 0000:00:00.0: PME: Signaling with IRQ 37
  822. [ 5.538463] pcieport 0000:00:00.0: AER: enabled with IRQ 37
  823. [ 5.544185] pcieport 0001:00:00.0: PME: Signaling with IRQ 38
  824. [ 5.550018] pcieport 0001:00:00.0: AER: enabled with IRQ 38
  825. [ 5.555896] libphy: SFP I2C Bus: probed
  826. [ 5.559768] sfp sfp-0: Host maximum power 2.0W
  827. [ 5.564292] sfp sfp-0: No tx_disable pin: SFP modules will always be emitting.
  828. [ 5.571731] libphy: SFP I2C Bus: probed
  829. [ 5.575593] sfp sfp-1: Host maximum power 2.0W
  830. [ 5.580107] sfp sfp-1: No tx_disable pin: SFP modules will always be emitting.
  831. [ 5.587531] libphy: SFP I2C Bus: probed
  832. [ 5.591392] sfp sfp-2: Host maximum power 2.0W
  833. [ 5.595902] sfp sfp-2: No tx_disable pin: SFP modules will always be emitting.
  834. [ 5.603328] libphy: SFP I2C Bus: probed
  835. [ 5.607194] sfp sfp-3: Host maximum power 2.0W
  836. [ 5.611712] sfp sfp-3: No tx_disable pin: SFP modules will always be emitting.
  837. [ 5.855485] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:01] driver [Qualcomm Atheros AR8035] (irq=POLL)
  838. [ 5.868865] fsl_dpaa2_eth dpni.0: Probed interface eth0
  839. [ 5.876740] fsl_dpaa2_mac dpmac.6: fsl_mc_allocate_irqs err -22
  840. [ 5.883168] fsl_dpaa2_mac dpmac.6: fsl_mc_driver_probe failed: -14
  841. [ 5.889361] fsl_dpaa2_mac: probe of dpmac.6 failed with error -14
  842. [ 5.897584] fsl_dpaa2_mac dpmac.5: fsl_mc_allocate_irqs err -22
  843. [ 5.904011] fsl_dpaa2_mac dpmac.5: fsl_mc_driver_probe failed: -14
  844. [ 5.910204] fsl_dpaa2_mac: probe of dpmac.5 failed with error -14
  845. [ 5.918288] fsl_dpaa2_mac dpmac.4: fsl_mc_allocate_irqs err -22
  846. [ 5.924717] fsl_dpaa2_mac dpmac.4: fsl_mc_driver_probe failed: -14
  847. [ 5.930909] fsl_dpaa2_mac: probe of dpmac.4 failed with error -14
  848. [ 5.938797] fsl_dpaa2_mac dpmac.3: fsl_mc_allocate_irqs err -22
  849. [ 5.945222] fsl_dpaa2_mac dpmac.3: fsl_mc_driver_probe failed: -14
  850. [ 5.951421] fsl_dpaa2_mac: probe of dpmac.3 failed with error -14
  851. [ 5.958429] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  852. [ 5.964957] sfp sfp-0: module FS SFPP-PC05 rev A sn F1940162637-2 dc 191212
  853. [ 5.986389] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  854. [ 5.994492] VFS: Mounted root (ext4 filesystem) on device 179:99.
  855. [ 6.007237] devtmpfs: mounted
  856. [ 6.010765] Freeing unused kernel memory: 2560K
  857. [ 6.015368] Run /sbin/init as init process
  858. [ 6.211736] systemd[1]: System time before build time, advancing clock.
  859. [ 6.233452] systemd[1]: systemd 249.11-0ubuntu3.6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  860. [ 6.264794] systemd[1]: Detected architecture arm64.
  861.  
  862. Welcome to Ubuntu 22.04.1 LTS!
  863.  
  864. [ 6.289921] systemd[1]: Hostname set to <lx2160acex7-01>.
  865. [ 6.511323] systemd[1]: Queued start job for default target Graphical Interface.
  866. [ 6.519057] random: systemd: uninitialized urandom read (16 bytes read)
  867. [ 6.526827] systemd[1]: Created slice Slice /system/getty.
  868. [ OK ] Created slice Slice /system/getty.
  869. [ 6.546337] random: systemd: uninitialized urandom read (16 bytes read)
  870. [ 6.553452] systemd[1]: Created slice Slice /system/modprobe.
  871. [ OK ] Created slice Slice /system/modprobe.
  872. [ 6.574336] random: systemd: uninitialized urandom read (16 bytes read)
  873. [ 6.581528] systemd[1]: Created slice Slice /system/serial-getty.
  874. [ OK ] Created slice Slice /system/serial-getty.
  875. [ 6.602794] systemd[1]: Created slice Slice /system/systemd-fsck.
  876. [ OK ] Created slice Slice /system/systemd-fsck.
  877. [ 6.622691] systemd[1]: Created slice User and Session Slice.
  878. [ OK ] Created slice User and Session Slice.
  879. [ 6.642435] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  880. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  881. [ 6.666410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  882. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  883. [ 6.690577] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  884. [ OK ] Set up automount Arbitrary…s File System Automount Point.
  885. [ 6.714370] systemd[1]: Reached target Local Encrypted Volumes.
  886. [ OK ] Reached target Local Encrypted Volumes.
  887. [ 6.734365] systemd[1]: Reached target Path Units.
  888. [ OK ] Reached target Path Units.
  889. [ 6.750335] systemd[1]: Reached target Remote File Systems.
  890. [ OK ] Reached target Remote File Systems.
  891. [ 6.770327] systemd[1]: Reached target Slice Units.
  892. [ OK ] Reached target Slice Units.
  893. [ 6.786345] systemd[1]: Reached target Swaps.
  894. [ OK ] Reached target Swaps.
  895. [ 6.802335] systemd[1]: Reached target System Time Set.
  896. [ OK ] Reached target System Time Set.
  897. [ 6.822358] systemd[1]: Reached target Local Verity Protected Volumes.
  898. [ OK ] Reached target Local Verity Protected Volumes.
  899. [ 6.842577] systemd[1]: Listening on fsck to fsckd communication Socket.
  900. [ OK ] Listening on fsck to fsckd communication Socket.
  901. [ 6.866404] systemd[1]: Listening on initctl Compatibility Named Pipe.
  902. [ OK ] Listening on initctl Compatibility Named Pipe.
  903. [ 6.886651] systemd[1]: Listening on Journal Audit Socket.
  904. [ OK ] Listening on Journal Audit Socket.
  905. [ 6.906479] systemd[1]: Listening on Journal Socket (/dev/log).
  906. [ OK ] Listening on Journal Socket (/dev/log).
  907. [ 6.926505] systemd[1]: Listening on Journal Socket.
  908. [ OK ] Listening on Journal Socket.
  909. [ 6.949539] systemd[1]: Listening on udev Control Socket.
  910. [ OK ] Listening on udev Control Socket.
  911. [ 6.970482] systemd[1]: Listening on udev Kernel Socket.
  912. [ OK ] Listening on udev Kernel Socket.
  913. [ 6.990328] systemd[1]: Reached target Socket Units.
  914. [ OK ] Reached target Socket Units.
  915. [ 7.007767] systemd[1]: Mounting Huge Pages File System...
  916. Mounting Huge Pages File System...
  917. [ 7.027748] systemd[1]: Mounting POSIX Message Queue File System...
  918. Mounting POSIX Message Queue File System...
  919. [ 7.047722] systemd[1]: Mounting Kernel Debug File System...
  920. Mounting Kernel Debug File System...
  921. [ 7.066456] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  922. [ 7.075061] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  923. [ 7.087925] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  924. [ 7.097825] systemd[1]: Starting Journal Service...
  925. Starting Journal Service...
  926. [ 7.121780] systemd[1]: Starting Create List of Static Device Nodes...
  927. Starting Create List of Static Device Nodes...
  928. [ 7.143983] systemd[1]: Starting Load Kernel Module chromeos_pstore...
  929. Starting Load Kernel Module chromeos_pstore...
  930. [ 7.168022] systemd[1]: Starting Load Kernel Module configfs...
  931. Starting Load Kernel Module configfs...
  932. [ 7.187899] systemd[1]: Starting Load Kernel Module drm...
  933. Starting Load Kernel Module drm...
  934. [ 7.207930] systemd[1]: Starting Load Kernel Module efi_pstore...
  935. Starting Load Kernel Module efi_pstore...
  936. [ 7.227862] systemd[1]: Starting Load Kernel Module fuse...
  937. Starting Load Kernel Module fuse...
  938. [ 7.247940] systemd[1]: Starting Load Kernel Module pstore_blk...
  939. Starting Load Kernel Module pstore_blk...
  940. [ 7.267903] systemd[1]: Starting Load Kernel Module pstore_zone...
  941. Starting Load Kernel Module pstore_zone...
  942. [ 7.291908] systemd[1]: Starting Load Kernel Module ramoops...
  943. Starting Load Kernel Module ramoops...
  944. [ 7.310423] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  945. [ 7.324042] systemd[1]: Starting Load Kernel Modules...
  946. Starting Load Kernel Modules...
  947. [ 7.343740] systemd[1]: Starting Remount Root and Kernel File Systems...
  948. Starting Remount Root and Kernel File Systems...
  949. [ 7.354764] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
  950. [ 7.362169] ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff)
  951. [ 7.380105] systemd[1]: Starting Coldplug All udev Devices...
  952. Starting Coldplug All udev Devices...
  953. [ 7.401141] systemd[1]: Started Journal Service.
  954. [ OK ] Started Journal Service.
  955. [ OK ] Mounted Huge Pages File System.
  956. [ OK ] Mounted POSIX Message Queue File System.
  957. [ OK ] Mounted Kernel Debug File System.
  958. [ OK ] Finished Create List of Static Device Nodes.
  959. [ OK ] Finished Load Kernel Module chromeos_pstore.
  960. [ OK ] Finished Load Kernel Module configfs.
  961. [ OK ] Finished Load Kernel Module drm.
  962. [ OK ] Finished Load Kernel Module efi_pstore.
  963. [ OK ] Finished Load Kernel Module fuse.
  964. [ OK ] Finished Load Kernel Module pstore_blk.
  965. [ OK ] Finished Load Kernel Module pstore_zone.
  966. [ OK ] Finished Load Kernel Module ramoops.
  967. [ OK ] Finished Load Kernel Modules.
  968. [ OK ] Finished Remount Root and Kernel File Systems.
  969. Mounting FUSE Control File System...
  970. Mounting Kernel Configuration File System...
  971. Starting Flush Journal to Persistent Storage...
  972. [ 7.685841] systemd-journald[309]: Received client request to flush runtime journal.
  973. [ 7.698358] systemd-journald[309]: File /var/log/journal/a3e058ff05874fa48d317e61a3aa5094/system.journal corrupted or uncleanly shut down, renaming and replacing.
  974. Starting Load/Save Random Seed...
  975. Starting Apply Kernel Variables...
  976. Starting Create System Users...
  977. [ OK ] Mounted FUSE Control File System.
  978. [ OK ] Mounted Kernel Configuration File System.
  979. [ OK ] Finished Coldplug All udev Devices.
  980. Starting Wait for udev To …plete Device Initialization...
  981. [ OK ] Finished Apply Kernel Variables.
  982. [ OK ] Finished Create System Users.
  983. Starting Create Static Device Nodes in /dev...
  984. [ OK ] Finished Create Static Device Nodes in /dev.
  985. [ OK ] Reached target Preparation for Local File Systems.
  986. [ OK ] Reached target Local File Systems.
  987. Starting Rule-based Manage…for Device Events and Files...
  988. [ OK ] Finished Flush Journal to Persistent Storage.
  989. Starting Create Volatile Files and Directories...
  990. [ OK ] Finished Create Volatile Files and Directories.
  991. [ OK ] Started Rule-based Manager for Device Events and Files.
  992. Starting Network Name Resolution...
  993. Starting Record System Boot/Shutdown in UTMP...
  994. [ OK ] Finished Record System Boot/Shutdown in UTMP.
  995. [ OK ] Found device /dev/ttyAMA0.
  996. [ 8.428309] fsl_mc_dprc dprc.1 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 512
  997. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  998. Starting Load/Save RF Kill Switch Status...
  999. [ OK ] Finished Load/Save Random Seed.
  1000. [ OK ] Found device /dev/mmcblk0p4.
  1001. [ OK ] Started Network Name Resolution.
  1002. [ OK ] Reached target Host and Network Name Lookups.
  1003. Starting File System Check on /dev/mmcblk0p4...
  1004. [ OK ] Started File System Check Daemon to report status.
  1005. [ OK ] Finished File System Check on /dev/mmcblk0p4.
  1006. Mounting /data...
  1007. [ OK ] Mounted /data.
  1008. [ OK ] Started Load/Save RF Kill Switch Status.
  1009. [ OK ] Finished Wait for udev To Complete Device Initialization.
  1010. [ OK ] Reached target System Initialization.
  1011. [ OK ] Started Daily Cleanup of Temporary Directories.
  1012. [ OK ] Reached target Basic System.
  1013. [ OK ] Listening on D-Bus System Message Bus Socket.
  1014. Starting chrony, an NTP client/server...
  1015. [ OK ] Started D-Bus System Message Bus.
  1016. Starting Remove Stale Onli…t4 Metadata Check Snapshots...
  1017. Starting Initialize hardware monitoring sensors...
  1018. Starting Network initialization...
  1019. Starting LSB: rng-tools (Debian variant)...
  1020. Starting OpenBSD Secure Shell server...
  1021. Starting User Login Management...
  1022. Starting Permit User Sessions...
  1023. [ OK ] Started chrony, an NTP client/server.
  1024. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
  1025. [ OK ] Finished Permit User Sessions.
  1026. [ OK ] Reached target System Time Synchronized.
  1027. [ OK ] Started Daily apt download activities.
  1028. [ OK ] Started Daily apt upgrade and clean activities.
  1029. [ OK ] Started Daily dpkg database backup timer.
  1030. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
  1031. [ OK ] Started Discard unused blocks once a week.
  1032. [ OK ] Started Message of the Day.
  1033. [ OK ] Reached target Timer Units.
  1034. [ OK ] Started Getty on tty1.
  1035. [ OK ] Started Serial Getty on ttyAMA0.
  1036. [ OK ] Reached target Login Prompts.
  1037. [ OK ] Finished Initialize hardware monitoring sensors.
  1038. [ OK ] Started OpenBSD Secure Shell server.
  1039. [ OK ] Started LSB: rng-tools (Debian variant).
  1040. [ OK ] Started User Login Management.
  1041. [ OK ] Reached target Multi-User System.
  1042. [ OK ] Reached target Graphical Interface.
  1043. Starting Record Runlevel Change in UTMP...
  1044. [ OK ] Finished Record Runlevel Change in UTMP.
  1045.  
  1046. Ubuntu 22.04.1 LTS lx2160acex7-01 ttyAMA0
  1047.  
  1048. lx2160acex7-01 login: [ 28.611195] bh2 0000:01:00.0 wlp1s0f0: synchronous (seq 1) BMI call (f04e->9004) timeout 10000 msec
  1049. [ 28.620244] bh2 0000:01:00.0 wlp1s0f0: Could not get firmware version
  1050. [ 38.851557] bh2 0000:01:00.0 wlp1s0f0: synchronous (seq 3) BMI call (f04e->9004) timeout 10000 msec
  1051. [ 38.860602] bh2 0000:01:00.0 wlp1s0f0: Could not get firmware version
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!