API tools faq
paste
Advertisement
j0h

diskStatus

j0h
Dec 27th, 2014
555
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.58 KB | None | 0 0
raw download clone embed print report
  1.  
  2.  
  3. smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-36-generic] (local build)
  4. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  5.  
  6. === START OF INFORMATION SECTION ===
  7. Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
  8. Device Model: ST3160023AS
  9. Serial Number: 5MT2AQAW
  10. Firmware Version: 3.42
  11. User Capacity: 160,041,885,696 bytes [160 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
  15. Local Time is: Fri Dec 26 13:20:16 2014 EST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18. AAM feature is: Unavailable
  19. APM feature is: Unavailable
  20. Rd look-ahead is: Enabled
  21. Write cache is: Enabled
  22. ATA Security is: Disabled, NOT FROZEN [SEC1]
  23. Wt Cache Reorder: Unavailable
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART overall-health self-assessment test result: PASSED
  27.  
  28. General SMART Values:
  29. Offline data collection status: (0x82) Offline data collection activity
  30. was completed without error.
  31. Auto Offline Data Collection: Enabled.
  32. Self-test execution status: ( 0) The previous self-test routine completed
  33. without error or no self-test has ever
  34. been run.
  35. Total time to complete Offline
  36. data collection: ( 0) seconds.
  37. Offline data collection
  38. capabilities: (0x5b) SMART execute Offline immediate.
  39. Auto Offline data collection on/off support.
  40. Suspend Offline collection upon new
  41. command.
  42. Offline surface scan supported.
  43. Self-test supported.
  44. No Conveyance Self-test supported.
  45. Selective Self-test supported.
  46. SMART capabilities: (0x0003) Saves SMART data before entering
  47. power-saving mode.
  48. Supports SMART auto save timer.
  49. Error logging capability: (0x01) Error logging supported.
  50. No General Purpose Logging support.
  51. Short self-test routine
  52. recommended polling time: ( 1) minutes.
  53. Extended self-test routine
  54. recommended polling time: ( 94) minutes.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  59. 1 Raw_Read_Error_Rate POSR-- 051 040 006 - 63955257
  60. 3 Spin_Up_Time PO---- 097 096 000 - 0
  61. 4 Start_Stop_Count -O--CK 035 035 020 - 67346
  62. 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1
  63. 7 Seek_Error_Rate POSR-- 077 060 030 - 56421522
  64. 9 Power_On_Hours -O--CK 092 092 000 - 7394
  65. 10 Spin_Retry_Count PO--C- 100 100 097 - 0
  66. 12 Power_Cycle_Count -O--CK 098 098 020 - 2687
  67. 194 Temperature_Celsius -O---K 033 061 000 - 33 (0 18 0 0 0)
  68. 195 Hardware_ECC_Recovered -O-RC- 051 040 000 - 63955257
  69. 197 Current_Pending_Sector -O--C- 100 100 000 - 0
  70. 198 Offline_Uncorrectable ----C- 100 100 000 - 0
  71. 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
  72. 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
  73. 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
  74. ||||||_ K auto-keep
  75. |||||__ C event count
  76. ||||___ R error rate
  77. |||____ S speed/performance
  78. ||_____ O updated online
  79. |______ P prefailure warning
  80.  
  81. General Purpose Log Directory Version 1
  82. SMART Log Directory Version 1 [multi-sector log support]
  83. Address Access R/W Size Description
  84. 0x00 GPL,SL R/O 1 Log Directory
  85. 0x01 GPL,SL R/O 1 Summary SMART error log
  86. 0x02 GPL,SL R/O 5 Comprehensive SMART error log
  87. 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
  88. 0x06 GPL,SL R/O 1 SMART self-test log
  89. 0x07 GPL,SL R/O 1 Extended self-test log
  90. 0x09 GPL,SL R/W 1 Selective self-test log
  91. 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
  92. 0x21 GPL,SL R/O 1 Write stream error log
  93. 0x22 GPL,SL R/O 1 Read stream error log
  94. 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
  95. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  96. 0xa0 GPL,SL VS 1 Device vendor specific log
  97. 0xa1 GPL,SL VS 20 Device vendor specific log
  98. 0xa2 GPL,SL VS 101 Device vendor specific log
  99. 0xa8 GPL,SL VS 20 Device vendor specific log
  100. 0xa9 GPL,SL VS 1 Device vendor specific log
  101. 0xe0 GPL,SL R/W 1 SCT Command/Status
  102. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  103. 0xff GPL - 23552 Reserved
  104.  
  105. SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
  106. Device Error Count: 107 (device log contains only the most recent 20 errors)
  107. CR = Command Register
  108. FEATR = Features Register
  109. COUNT = Count (was: Sector Count) Register
  110. LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
  111. LH = LBA High (was: Cylinder High) Register ] LBA
  112. LM = LBA Mid (was: Cylinder Low) Register ] Register
  113. LL = LBA Low (was: Sector Number) Register ]
  114. DV = Device (was: Device/Head) Register
  115. DC = Device Control Register
  116. ER = Error register
  117. ST = Status register
  118. Powered_Up_Time is measured from power on, and printed as
  119. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  120. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  121.  
  122. Error 107 [6] occurred at disk power-on lifetime: 7203 hours (300 days + 3 hours)
  123. When the command that caused the error occurred, the device was active or idle.
  124.  
  125. After command completion occurred, registers were:
  126. ER -- ST COUNT LBA_48 LH LM LL DV DC
  127. -- -- -- == -- == == == -- -- -- -- --
  128. 40 -- 51 00 00 04 00 cb 48 04 48 e0 00 Error: UNC at LBA = 0x400cb480448 = 4401457005640
  129.  
  130. Commands leading to the command that caused the error were:
  131. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  132. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  133. c8 00 00 00 08 00 00 cb 00 04 48 e0 00 00:02:02.165 READ DMA
  134. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:02.164 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  135. ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:02:02.157 IDENTIFY DEVICE
  136. ef 00 03 00 46 00 ff ff 00 ff ff a0 00 00:01:58.286 SET FEATURES [Set transfer mode]
  137. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:58.286 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  138.  
  139. Error 106 [5] occurred at disk power-on lifetime: 7203 hours (300 days + 3 hours)
  140. When the command that caused the error occurred, the device was active or idle.
  141.  
  142. After command completion occurred, registers were:
  143. ER -- ST COUNT LBA_48 LH LM LL DV DC
  144. -- -- -- == -- == == == -- -- -- -- --
  145. 40 -- 51 00 00 04 00 cb 48 04 48 e0 00 Error: UNC at LBA = 0x400cb480448 = 4401457005640
  146.  
  147. Commands leading to the command that caused the error were:
  148. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  149. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  150. c8 00 00 00 08 00 00 cb 00 04 48 e0 00 00:01:50.454 READ DMA
  151. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:50.454 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  152. ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:50.446 IDENTIFY DEVICE
  153. ef 00 03 00 46 00 ff ff 00 ff ff a0 00 00:01:58.286 SET FEATURES [Set transfer mode]
  154. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:58.286 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  155.  
  156. Error 105 [4] occurred at disk power-on lifetime: 7203 hours (300 days + 3 hours)
  157. When the command that caused the error occurred, the device was active or idle.
  158.  
  159. After command completion occurred, registers were:
  160. ER -- ST COUNT LBA_48 LH LM LL DV DC
  161. -- -- -- == -- == == == -- -- -- -- --
  162. 40 -- 51 00 00 04 00 cb 48 04 48 e0 00 Error: UNC at LBA = 0x400cb480448 = 4401457005640
  163.  
  164. Commands leading to the command that caused the error were:
  165. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  166. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  167. c8 00 00 00 08 00 00 cb 00 04 48 e0 00 00:01:50.454 READ DMA
  168. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:50.454 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  169. ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:50.446 IDENTIFY DEVICE
  170. ef 00 03 00 46 00 ff ff 00 ff ff a0 00 00:01:50.439 SET FEATURES [Set transfer mode]
  171. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:50.439 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  172.  
  173. Error 104 [3] occurred at disk power-on lifetime: 7203 hours (300 days + 3 hours)
  174. When the command that caused the error occurred, the device was active or idle.
  175.  
  176. After command completion occurred, registers were:
  177. ER -- ST COUNT LBA_48 LH LM LL DV DC
  178. -- -- -- == -- == == == -- -- -- -- --
  179. 40 -- 51 00 00 04 00 cb 48 04 48 e0 00 Error: UNC at LBA = 0x400cb480448 = 4401457005640
  180.  
  181. Commands leading to the command that caused the error were:
  182. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  183. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  184. c8 00 00 00 08 00 00 cb 00 04 48 e0 00 00:01:50.454 READ DMA
  185. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:50.454 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  186. ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:50.446 IDENTIFY DEVICE
  187. ef 00 03 00 46 00 ff ff 00 ff ff a0 00 00:01:50.439 SET FEATURES [Set transfer mode]
  188. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:50.439 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  189.  
  190. Error 103 [2] occurred at disk power-on lifetime: 7203 hours (300 days + 3 hours)
  191. When the command that caused the error occurred, the device was active or idle.
  192.  
  193. After command completion occurred, registers were:
  194. ER -- ST COUNT LBA_48 LH LM LL DV DC
  195. -- -- -- == -- == == == -- -- -- -- --
  196. 40 -- 51 00 00 04 00 cb 48 04 48 e0 00 Error: UNC at LBA = 0x400cb480448 = 4401457005640
  197.  
  198. Commands leading to the command that caused the error were:
  199. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  200. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  201. c8 00 00 00 08 00 00 cb 00 04 48 e0 00 00:01:42.552 READ DMA
  202. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:42.546 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  203. ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:42.545 IDENTIFY DEVICE
  204. ef 00 03 00 46 00 ff ff 00 ff ff a0 00 00:01:42.539 SET FEATURES [Set transfer mode]
  205. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:38.598 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  206.  
  207. Error 102 [1] occurred at disk power-on lifetime: 7203 hours (300 days + 3 hours)
  208. When the command that caused the error occurred, the device was active or idle.
  209.  
  210. After command completion occurred, registers were:
  211. ER -- ST COUNT LBA_48 LH LM LL DV DC
  212. -- -- -- == -- == == == -- -- -- -- --
  213. 40 -- 51 00 00 04 00 cb 48 04 48 e0 00 Error: UNC at LBA = 0x400cb480448 = 4401457005640
  214.  
  215. Commands leading to the command that caused the error were:
  216. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  217. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  218. c8 00 00 00 08 00 00 cb 00 04 48 e0 00 00:01:42.552 READ DMA
  219. ec 00 00 00 01 00 ff ff 00 ff ff 00 00 00:01:42.546 IDENTIFY DEVICE
  220. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:42.545 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  221. ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:42.539 IDENTIFY DEVICE
  222. ef 00 03 00 46 00 ff ff 00 ff ff a0 00 00:01:38.598 SET FEATURES [Set transfer mode]
  223.  
  224. Error 101 [0] occurred at disk power-on lifetime: 7203 hours (300 days + 3 hours)
  225. When the command that caused the error occurred, the device was active or idle.
  226.  
  227. After command completion occurred, registers were:
  228. ER -- ST COUNT LBA_48 LH LM LL DV DC
  229. -- -- -- == -- == == == -- -- -- -- --
  230. 40 -- 51 00 00 04 00 cb 48 04 48 e0 00 Error: UNC at LBA = 0x400cb480448 = 4401457005640
  231.  
  232. Commands leading to the command that caused the error were:
  233. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  234. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  235. c8 00 00 00 08 00 00 cb 00 04 48 e0 00 00:01:34.614 READ DMA
  236. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:30.722 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  237. ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:30.722 IDENTIFY DEVICE
  238. ef 00 03 00 46 00 ff ff 00 ff ff a0 00 00:01:30.714 SET FEATURES [Set transfer mode]
  239. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:38.598 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  240.  
  241. Error 100 [19] occurred at disk power-on lifetime: 7203 hours (300 days + 3 hours)
  242. When the command that caused the error occurred, the device was active or idle.
  243.  
  244. After command completion occurred, registers were:
  245. ER -- ST COUNT LBA_48 LH LM LL DV DC
  246. -- -- -- == -- == == == -- -- -- -- --
  247. 40 -- 51 00 00 04 00 cb 48 04 48 e0 00 Error: UNC at LBA = 0x400cb480448 = 4401457005640
  248.  
  249. Commands leading to the command that caused the error were:
  250. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  251. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  252. c8 00 00 00 08 00 00 cb 00 04 48 e0 00 00:01:34.614 READ DMA
  253. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:30.722 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  254. ec 00 00 01 00 00 ff ff 00 ff ff a0 00 00:01:30.722 IDENTIFY DEVICE
  255. ef 00 03 00 46 00 ff ff 00 ff ff a0 00 00:01:30.714 SET FEATURES [Set transfer mode]
  256. 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:30.706 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  257.  
  258. SMART Extended Self-test Log Version: 1 (1 sectors)
  259. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  260.  
  261. SMART Selective self-test log data structure revision number 1
  262. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  263. 1 0 0 Not_testing
  264. 2 0 0 Not_testing
  265. 3 0 0 Not_testing
  266. 4 0 0 Not_testing
  267. 5 0 0 Not_testing
  268. Selective self-test flags (0x0):
  269. After scanning selected spans, do NOT read-scan remainder of disk.
  270. If Selective self-test is pending on power-up, resume after 0 minute delay.
  271.  
  272. SCT Commands not supported
  273.  
  274. Device Statistics (GP Log 0x04) not supported
  275.  
  276. SATA Phy Event Counters (GP Log 0x11) not supported
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!